[jboss-svn-commits] JBL Code SVN: r25070 - labs/jbossrules/trunk/drools-guvnor/src/main/java/org/drools/guvnor/client/messages.

Tue Feb 3 05:56:05 EST 2009

Author: Rikkola
Date: 2009-02-03 05:56:05 -0500 (Tue, 03 Feb 2009)
New Revision: 25070

Added:
   labs/jbossrules/trunk/drools-guvnor/src/main/java/org/drools/guvnor/client/messages/Messages.properties
Removed:
   labs/jbossrules/trunk/drools-guvnor/src/main/java/org/drools/guvnor/client/messages/messagesX.properties
Log:
Changing messages.properties to Messages.properties

Copied: labs/jbossrules/trunk/drools-guvnor/src/main/java/org/drools/guvnor/client/messages/Messages.properties (from rev 25069, labs/jbossrules/trunk/drools-guvnor/src/main/java/org/drools/guvnor/client/messages/messagesX.properties)
===================================================================

--- labs/jbossrules/trunk/drools-guvnor/src/main/java/org/drools/guvnor/client/messages/Messages.properties	                        (rev 0)
+++ labs/jbossrules/trunk/drools-guvnor/src/main/java/org/drools/guvnor/client/messages/Messages.properties	2009-02-03 10:56:05 UTC (rev 25070)
@@ -0,0 +1,158 @@
+ActionColumnConfigurationInsertingANewFact=Action column configuration (inserting a new fact)
+ChooseAPatternThatThisColumnAddsDataTo=Choose a pattern that this column adds data to
+Pattern=Pattern:
+Assets=Assets
+CreateNew=Create New
+Status=Status:
+Category=Category:
+RemoveThisItem=Remove this item?
+AddAnotherFieldToThisSoYouCanSetItsValue=Add another field to this so you can set its value.
+ChooseAMethodToInvoke=Choose a method to invoke
+AddField=Add field
+EditTheFieldThatThisColumnOperatesOn=Edit the field that this column operates on
+Field=Field:
+ValueListsExplanation=Value lists are an optional comma separated list of values to show as a drop down.
+ValueList=Value list
+optionalValueList=(optional) value list:
+ColumnHeaderDescription=Column header (description):
+ApplyChanges=Apply changes
+YouMustEnterAColumnHeaderValueDescription=You must enter a column header value (description)
+ThatColumnNameIsAlreadyInUsePleasePickAnother=That column name is already in use - please pick another
+OK=OK
+pleaseChooseFactType=(please choose fact type)
+ChooseExistingPatternToAddColumnTo=Choose existing pattern to add column to:
+ORwithEmphasis=<i><b>---OR---</i></b>
+CreateNewFactPattern=Create new fact pattern
+NewFactSelectTheType=New fact - select the type
+FactType=Fact type:
+name=name:
+AddAField=Add a field
+ColumnConfigurationSetAFieldOnAFact=Column configuration (set a field on a fact)
+ChooseABoundFactThatThisColumnPertainsTo=Choose a bound fact that this column pertains to
+UpdateEngineWithChanges=Update engine with changes:
+UpdateFact=Update fact
+UpdateDescription=Checking this will tell the engine that the value has changed. This will cause the rules that depend on it to be re-evaulated. Use with care !
+pleaseChooseAFactPatternFirst=(please choose a fact pattern first)
+ChooseFact=Choose fact:
+pleaseChooseABoundFactForThisColumn=(please choose a bound fact for this column)
+setterLabel={0} value of <b>{1}</b>
+statusIs=<i>Status: [{0}]</i>
+SaveChanges=Save changes
+CommitAnyChangesForThisAsset=Commit any changes for this asset.
+Copy=Copy
+CopyThisAsset=Copy this asset.
+Archive=Archive
+ArchiveThisAssetThisWillNotPermanentlyDeleteIt=Archive this asset. This will not permanently delete it.
+AreYouSureYouWantToArchiveThisItem=Are you sure you want to archive this item?
+ArchivedItemOn=Archived Item on :
+Delete=Delete
+DeleteAssetTooltip=Permanently delete this asset. This will only be shown before the asset is checked in.
+DeleteAreYouSure=Are you sure you want to permanently delete this (unversioned) item?
+ChangeStatus=Change status
+ChangeStatusTip=Change the status of this asset.
+CopyThisItem=Copy this item
+NewName=New name:
+CreateCopy=Create copy
+AssetNameMustNotBeEmpty=Asset name must not be empty.
+CreatedANewItemSuccess=Created a new item called [{0}] in package: [{1}] successfully.
+CheckInChanges=Check in changes.
+Fact=Fact:
+FieldValue=Field value
+LiteralValue=Literal value
+LiteralValTip=A literal value means the constraint is directly against the value that you type (ie. what you see on screen).
+Literal=Literal
+AdvancedSection=<i>Advanced</i>
+Formula=Formula
+FormulaTip=A formula is used when values are calculated, or a variable is used.
+Administration=Administration
+CategoryManager=Category Manager
+ArchivedManager=Archived Manager
+StateManager=State Manager
+ImportExport=Import Export
+EventLog=Event Log
+UserPermissionMappings=User Permission mappings
+About=About
+WebDAVURL=WebDAV URL:
+Version=Version
+Errors=Errors
+Warnings=Warnings
+Notes=Notes
+ShowFactUsages=Show fact usages...
+FactUsages=Fact usages
+FieldsUsed=<i>Fields used:</i>
+ShowRulesAffected=<i>Show rules affected ...</i>
+RulesAffected=<i>Rules affected:</i>
+Reason=Reason
+Cause=Cause
+AnalysingPackage=<b>Analysing package: {0}</b>
+RunAnalysis=Run analysis
+AnalysingPackageRunning=Analysing package...
+ArchivedItems=<b>Archived items</b>
+RestoreSelectedPackage=Restore selected package
+PermanentlyDeletePackage=Permanently delete package
+AreYouSurePackageDelete=Are you sure you want to permanently delete this package? This can not be undone.
+ArchivedPackagesList=Archived packages
+RestoreSelectedAsset=Restore selected asset
+PleaseSelectAnItemToRestore=Please select an item to restore.
+ItemRestored=Item restored.
+DeleteSelectedAsset=Delete selected asset
+PleaseSelectAnItemToPermanentlyDelete=Please select an item to permanently delete.
+AreYouSureDeletingAsset=Are you sure you want to permanently delete this asset ? This can not be undone.
+ItemDeleted=Item deleted.
+ArchivedAssets=Archived assets
+PackageDeleted=Package deleted
+PackageRestored=Package restored.
+noArchivedPackages=-- no archived packages --
+analysisResultSummary=<b>{0}</b> ({1} items).
+Upload=Upload
+UploadNewVersion=Upload new version:
+Download=Download
+DownloadCurrentVersion=Download current version:
+FileWasUploadedSuccessfully=File was uploaded successfully.
+UnableToUploadTheFile=Unable to upload the file.
+Uploading=Uploading...
+AddANewCategory=Add a new category.
+RemoveThisCategory=Remove this category
+SelectCategoryToAdd=Select category to add
+ShowingNofXItems=Showing #X of Y items.
+NItems=X items.
+refreshList=[refresh list]
+openSelected=[open selected]
+Opening=Opening:
+Next=Next ->
+Previous=<- Previous
+goToFirst=(go to first)
+ImportOrExport=<b>Import/Export</b>
+ImportFromAnXmlFile=Import from an xml file
+ExportToAZipFile=Export to a zip file
+Export=Export
+Import=Import
+ImportConfirm=Are you sure you want to import? This will erase any content in the repository currently?
+ImportingInProgress=Importing repository, please wait, as this could take some time...
+ImportDone=Rules repository imported successfully. Browser will now refresh to show the new content.
+ImportFailed=Unable to import into the repository. Consult the server logs for error messages.
+NoExportFilename=You did not specify an exported repository filename !
+PleaseSpecifyAValidRepositoryXmlFile=Please specify a valid repository xml file.
+ImportPackageConfirm=Are you sure you want to import? This will erase any content in the package currently?
+ImportingPackage=Importing package to repository, please wait, as this could take some time...
+PackageImportDone=Rules package imported successfully. Please refresh your browser (F5) to show the new content.
+PackageImportFailed=Unable to import into the repository. Consult the server logs for error messages.
+PackageExportNoName=You did not specify an exported repository package filename !
+PackageExportName=Please specify a valid repository package xml file.
+ExportRepoWarning=Export the repository? This may take some time.
+ExportRepoWait=Exporting repository, please wait, as this could take some time...
+ExportThePackage=Export the package?
+PleaseWait=Please Wait...
+TestFailureBulkFailures=[{0} failures out of {1}]
+Open=Open
+failuresOutOFExpectations={0} failures out of {1} expectations.
+OverallResult=Overall result:
+SuccessOverall=<b>SUCCESS</b>
+FailureOverall=<b>FAILURE</b>
+Results=Results:
+RuleCoveragePercent={0}% of the rules were tested.
+RulesCovered=Rules covered:
+UncoveredRules=Uncovered rules:
+Scenarios=Scenarios
+Close=Close
+BuildErrorsUnableToRunScenarios=Build errors - unable to run scenarios
\ No newline at end of file

Deleted: labs/jbossrules/trunk/drools-guvnor/src/main/java/org/drools/guvnor/client/messages/messagesX.properties
===================================================================
--- labs/jbossrules/trunk/drools-guvnor/src/main/java/org/drools/guvnor/client/messages/messagesX.properties	2009-02-03 10:46:20 UTC (rev 25069)
+++ labs/jbossrules/trunk/drools-guvnor/src/main/java/org/drools/guvnor/client/messages/messagesX.properties	2009-02-03 10:56:05 UTC (rev 25070)
@@ -1,158 +0,0 @@
-ActionColumnConfigurationInsertingANewFact=Action column configuration (inserting a new fact)
-ChooseAPatternThatThisColumnAddsDataTo=Choose a pattern that this column adds data to
-Pattern=Pattern:
-Assets=Assets
-CreateNew=Create New
-Status=Status:
-Category=Category:
-RemoveThisItem=Remove this item?
-AddAnotherFieldToThisSoYouCanSetItsValue=Add another field to this so you can set its value.
-ChooseAMethodToInvoke=Choose a method to invoke
-AddField=Add field
-EditTheFieldThatThisColumnOperatesOn=Edit the field that this column operates on
-Field=Field:
-ValueListsExplanation=Value lists are an optional comma separated list of values to show as a drop down.
-ValueList=Value list
-optionalValueList=(optional) value list:
-ColumnHeaderDescription=Column header (description):
-ApplyChanges=Apply changes
-YouMustEnterAColumnHeaderValueDescription=You must enter a column header value (description)
-ThatColumnNameIsAlreadyInUsePleasePickAnother=That column name is already in use - please pick another
-OK=OK
-pleaseChooseFactType=(please choose fact type)
-ChooseExistingPatternToAddColumnTo=Choose existing pattern to add column to:
-ORwithEmphasis=<i><b>---OR---</i></b>
-CreateNewFactPattern=Create new fact pattern
-NewFactSelectTheType=New fact - select the type
-FactType=Fact type:
-name=name:
-AddAField=Add a field
-ColumnConfigurationSetAFieldOnAFact=Column configuration (set a field on a fact)
-ChooseABoundFactThatThisColumnPertainsTo=Choose a bound fact that this column pertains to
-UpdateEngineWithChanges=Update engine with changes:
-UpdateFact=Update fact
-UpdateDescription=Checking this will tell the engine that the value has changed. This will cause the rules that depend on it to be re-evaulated. Use with care !
-pleaseChooseAFactPatternFirst=(please choose a fact pattern first)
-ChooseFact=Choose fact:
-pleaseChooseABoundFactForThisColumn=(please choose a bound fact for this column)
-setterLabel={0} value of <b>{1}</b>
-statusIs=<i>Status: [{0}]</i>
-SaveChanges=Save changes
-CommitAnyChangesForThisAsset=Commit any changes for this asset.
-Copy=Copy
-CopyThisAsset=Copy this asset.
-Archive=Archive
-ArchiveThisAssetThisWillNotPermanentlyDeleteIt=Archive this asset. This will not permanently delete it.
-AreYouSureYouWantToArchiveThisItem=Are you sure you want to archive this item?
-ArchivedItemOn=Archived Item on :
-Delete=Delete
-DeleteAssetTooltip=Permanently delete this asset. This will only be shown before the asset is checked in.
-DeleteAreYouSure=Are you sure you want to permanently delete this (unversioned) item?
-ChangeStatus=Change status
-ChangeStatusTip=Change the status of this asset.
-CopyThisItem=Copy this item
-NewName=New name:
-CreateCopy=Create copy
-AssetNameMustNotBeEmpty=Asset name must not be empty.
-CreatedANewItemSuccess=Created a new item called [{0}] in package: [{1}] successfully.
-CheckInChanges=Check in changes.
-Fact=Fact:
-FieldValue=Field value
-LiteralValue=Literal value
-LiteralValTip=A literal value means the constraint is directly against the value that you type (ie. what you see on screen).
-Literal=Literal
-AdvancedSection=<i>Advanced</i>
-Formula=Formula
-FormulaTip=A formula is used when values are calculated, or a variable is used.
-Administration=Administration
-CategoryManager=Category Manager
-ArchivedManager=Archived Manager
-StateManager=State Manager
-ImportExport=Import Export
-EventLog=Event Log
-UserPermissionMappings=User Permission mappings
-About=About
-WebDAVURL=WebDAV URL:
-Version=Version
-Errors=Errors
-Warnings=Warnings
-Notes=Notes
-ShowFactUsages=Show fact usages...
-FactUsages=Fact usages
-FieldsUsed=<i>Fields used:</i>
-ShowRulesAffected=<i>Show rules affected ...</i>
-RulesAffected=<i>Rules affected:</i>
-Reason=Reason
-Cause=Cause
-AnalysingPackage=<b>Analysing package: {0}</b>
-RunAnalysis=Run analysis
-AnalysingPackageRunning=Analysing package...
-ArchivedItems=<b>Archived items</b>
-RestoreSelectedPackage=Restore selected package
-PermanentlyDeletePackage=Permanently delete package
-AreYouSurePackageDelete=Are you sure you want to permanently delete this package? This can not be undone.
-ArchivedPackagesList=Archived packages
-RestoreSelectedAsset=Restore selected asset
-PleaseSelectAnItemToRestore=Please select an item to restore.
-ItemRestored=Item restored.
-DeleteSelectedAsset=Delete selected asset
-PleaseSelectAnItemToPermanentlyDelete=Please select an item to permanently delete.
-AreYouSureDeletingAsset=Are you sure you want to permanently delete this asset ? This can not be undone.
-ItemDeleted=Item deleted.
-ArchivedAssets=Archived assets
-PackageDeleted=Package deleted
-PackageRestored=Package restored.
-noArchivedPackages=-- no archived packages --
-analysisResultSummary=<b>{0}</b> ({1} items).
-Upload=Upload
-UploadNewVersion=Upload new version:
-Download=Download
-DownloadCurrentVersion=Download current version:
-FileWasUploadedSuccessfully=File was uploaded successfully.
-UnableToUploadTheFile=Unable to upload the file.
-Uploading=Uploading...
-AddANewCategory=Add a new category.
-RemoveThisCategory=Remove this category
-SelectCategoryToAdd=Select category to add
-ShowingNofXItems=Showing #X of Y items.
-NItems=X items.
-refreshList=[refresh list]
-openSelected=[open selected]
-Opening=Opening:
-Next=Next ->
-Previous=<- Previous
-goToFirst=(go to first)
-ImportOrExport=<b>Import/Export</b>
-ImportFromAnXmlFile=Import from an xml file
-ExportToAZipFile=Export to a zip file
-Export=Export
-Import=Import
-ImportConfirm=Are you sure you want to import? This will erase any content in the repository currently?
-ImportingInProgress=Importing repository, please wait, as this could take some time...
-ImportDone=Rules repository imported successfully. Browser will now refresh to show the new content.
-ImportFailed=Unable to import into the repository. Consult the server logs for error messages.
-NoExportFilename=You did not specify an exported repository filename !
-PleaseSpecifyAValidRepositoryXmlFile=Please specify a valid repository xml file.
-ImportPackageConfirm=Are you sure you want to import? This will erase any content in the package currently?
-ImportingPackage=Importing package to repository, please wait, as this could take some time...
-PackageImportDone=Rules package imported successfully. Please refresh your browser (F5) to show the new content.
-PackageImportFailed=Unable to import into the repository. Consult the server logs for error messages.
-PackageExportNoName=You did not specify an exported repository package filename !
-PackageExportName=Please specify a valid repository package xml file.
-ExportRepoWarning=Export the repository? This may take some time.
-ExportRepoWait=Exporting repository, please wait, as this could take some time...
-ExportThePackage=Export the package?
-PleaseWait=Please Wait...
-TestFailureBulkFailures=[{0} failures out of {1}]
-Open=Open
-failuresOutOFExpectations={0} failures out of {1} expectations.
-OverallResult=Overall result:
-SuccessOverall=<b>SUCCESS</b>
-FailureOverall=<b>FAILURE</b>
-Results=Results:
-RuleCoveragePercent={0}% of the rules were tested.
-RulesCovered=Rules covered:
-UncoveredRules=Uncovered rules:
-Scenarios=Scenarios
-Close=Close
-BuildErrorsUnableToRunScenarios=Build errors - unable to run scenarios
\ No newline at end of file


