Author: jaredmorgs Date: 2013-05-09 02:14:53 -0400 (Thu, 09 May 2013) New Revision: 9276 Modified: epp/docs/JPP/trunk/Development_Guide/en-US/Revision_History.xml epp/docs/JPP/trunk/Development_Guide/en-US/appendix-Quickstarts.xml epp/docs/JPP/trunk/Development_Guide/en-US/eXo_JCR.xml epp/docs/JPP/trunk/Reference_Guide/en-US/Reference_Guide.xml epp/docs/JPP/trunk/Reference_Guide/en-US/modules/eXoJCR.xml Log: Corrected IDREFS in the eXoJCR section to remove reference to the Reference Guide Modified: epp/docs/JPP/trunk/Development_Guide/en-US/Revision_History.xml =================================================================== --- epp/docs/JPP/trunk/Development_Guide/en-US/Revision_History.xml 2013-05-08 07:02:26 UTC (rev 9275) +++ epp/docs/JPP/trunk/Development_Guide/en-US/Revision_History.xml 2013-05-09 06:14:53 UTC (rev 9276) @@ -8,6 +8,20 @@ <simpara> <revhistory> <revision> + <revnumber>6.1.0-6</revnumber> + <date>Wed May 8 2013</date> + <author> + <firstname>Jared</firstname> + <surname>Morgan</surname> + <email/> + </author> + <revdescription> + <simplelist> + <member>eXo JCR ID refs normalized to remove all reference to Reference Guide. Next task is to check figures, tables, and examples for links to Reference Guide, and normalize.</member> + </simplelist> + </revdescription> + </revision> + <revision> <revnumber>6.1.0-5</revnumber> <date>Wed May 8 2013</date> <author> Modified: epp/docs/JPP/trunk/Development_Guide/en-US/appendix-Quickstarts.xml =================================================================== --- epp/docs/JPP/trunk/Development_Guide/en-US/appendix-Quickstarts.xml 2013-05-08 07:02:26 UTC (rev 9275) +++ epp/docs/JPP/trunk/Development_Guide/en-US/appendix-Quickstarts.xml 2013-05-09 06:14:53 UTC (rev 9276) @@ -3,7 +3,7 @@ <!ENTITY % BOOK_ENTITIES SYSTEM "Development_Guide.ent"> %BOOK_ENTITIES; ]> -<appendix id="Appendix_-_Quickstarts"> +<appendix id="Quickstarts"> <title>Quickstarts</title> <para>JBoss Portal Platform Quickstarts provide small, specific, working examples that can be used as a reference for your own project.</para> <para>The Quickstarts can be obtained in one of the following ways:</para> Modified: epp/docs/JPP/trunk/Development_Guide/en-US/eXo_JCR.xml =================================================================== (Binary files differ) Modified: epp/docs/JPP/trunk/Reference_Guide/en-US/Reference_Guide.xml =================================================================== --- epp/docs/JPP/trunk/Reference_Guide/en-US/Reference_Guide.xml 2013-05-08 07:02:26 UTC (rev 9275) +++ epp/docs/JPP/trunk/Reference_Guide/en-US/Reference_Guide.xml 2013-05-09 06:14:53 UTC (rev 9276) @@ -13,6 +13,5 @@ <title>Web Services for Remote Portlets (WSRP)</title> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="modules/WSRP.xml"/> </part> -<!-- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="modules/Advanced.xml"/> --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="modules/eXoJCR.xml"/> - <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Revision_History.xml"/> +<!-- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="modules/Advanced.xml"/> --><!--eXo JCR part moved over to the Development Guide--><!--<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="modules/eXoJCR.xml"/>--> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Revision_History.xml"/> </book> Modified: epp/docs/JPP/trunk/Reference_Guide/en-US/modules/eXoJCR.xml =================================================================== --- epp/docs/JPP/trunk/Reference_Guide/en-US/modules/eXoJCR.xml 2013-05-08 07:02:26 UTC (rev 9275) +++ epp/docs/JPP/trunk/Reference_Guide/en-US/modules/eXoJCR.xml 2013-05-09 06:14:53 UTC (rev 9276) @@ -132,7 +132,7 @@ Source License: http://www.day.com/specs/jcr/2.0/license.html] --> </section> </chapter> <chapter xmlns="" id="chap-Reference_Guide-Implementation"> - <title>Implementation</title> +<!-- This document was created with Syntext Serna Free. --> <title>Implementation</title> <para> The relationships between the eXo Repository Service components are illustrated below: </para> @@ -1014,4620 +1014,24 @@ <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_multilanguage-support/default58.xml" parse="text"/></programlisting> </section> </chapter> - <chapter xmlns="" id="chap-Reference_Guide-Search_Configuration"> - <title>Configuring Search</title> - <para> - The search function in JCR can be configured to perform in specific ways. This section will discuss configuring the search function to improve search performance and results. - </para> - <para> - Below is an example of the configuration file that governs search behaviors. Refer to <xref linkend="sect-Reference_Guide-Search_Configuration-Global_Search_Index"/> for how searching operates in JCR and information about customized searches. - </para> - <para> - The JCR index configuration file is located at <filename><replaceable>JPP_HOME</replaceable>/gatein/gatein.ear/portal.war/WEB-INF/conf/jcr/repository-configuration.xml</filename>. - </para> - <para> - A code example is included below with a list of the configuration parameters shown below that. - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_search-configuration/default61.xml" parse="text"/></programlisting> - <para> - The table below outlines <emphasis role="bold">some</emphasis> of the Configuration Parameters available, their default setting, which version of eXo JCR they were implemented in and other useful information (further parameters are explained in <xref linkend="sect-Reference_Guide-JBoss_Cache_configuration-Indexer_lock_manager_and_data_container_configuration"/>): - </para> - <table id="tabl-Reference_Guide-Search_Configuration-Configuration_parameters"> -<!-- align="left" pgwide="1" --> <title>Configuration parameters</title> - <tgroup cols="4"> - <colspec colname="1" colwidth="90pt"/> - <colspec colname="2" colwidth="90pt"/> - <colspec colname="3" colwidth="150pt"/> - <colspec colname="4" colwidth="50pt"/> - <thead> - <row> - <entry> - <para> - Parameter - </para> - </entry> - <entry> - <para> - Default - </para> - </entry> - <entry> - <para> - Description - </para> - </entry> - <entry> Implemented in Version </entry> - </row> - </thead> - <tbody> - <row> - <entry> - <para> - index-dir - </para> - </entry> - <entry> - <para> - none - </para> - </entry> - <entry> - <para> - The location of the index directory. This parameter is mandatory. It is called &quot;<literal>indexDir</literal>&quot; in versions prior to eXo JCR version 1.9. - </para> - </entry> - <entry> 1.0 </entry> - </row> - <row> - <entry> - <para> - use-compoundfile - </para> - </entry> - <entry> - <para> - true - </para> - </entry> - <entry> - <para> - Advises lucene to use compound files for the index files. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - min-merge-docs - </para> - </entry> - <entry> - <para> - 100 - </para> - </entry> - <entry> - <para> - The minimum number of nodes in an index until segments are merged. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - volatile-idle-time - </para> - </entry> - <entry> 3 </entry> - <entry> - <para> - Idle time in seconds until the volatile index part is moved to a persistent index even though <literal>minMergeDocs</literal> is not reached. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - max-merge-docs - </para> - </entry> - <entry> - <para> - Integer.MAX_VALUE - </para> - </entry> - <entry> - <para> - The maximum number of nodes in segments that will be merged. The default value changed to <literal>Integer.MAX_VALUE</literal> in eXo JCR version 1.9. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - merge-factor - </para> - </entry> - <entry> - <para> - 10 - </para> - </entry> - <entry> - <para> - Determines how often segment indices are merged. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - max-field-length - </para> - </entry> - <entry> - <para> - 10000 - </para> - </entry> - <entry> - <para> - The number of words that are full-text indexed at most per property. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - cache-size - </para> - </entry> - <entry> - <para> - 1000 - </para> - </entry> - <entry> - <para> - Size of the document number cache. This cache maps UUID to lucene document numbers - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - force-consistencycheck - </para> - </entry> - <entry> - <para> - false - </para> - </entry> - <entry> - <para> - Runs a consistency check on every start up. If false, a consistency check is only performed when the search index detects a prior forced shutdown. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - auto-repair - </para> - </entry> - <entry> - <para> - true - </para> - </entry> - <entry> - <para> - Errors detected by a consistency check are automatically repaired. If false, errors are only written to the log. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> query-class </entry> - <entry> QueryImpl </entry> - <entry> - <para> - Classname that implements the javax.jcr.query.Query interface. - </para> - <para> - This class must also extend from the class: <literal>org.exoplatform.services.jcr.impl.core. query.AbstractQueryImpl</literal>. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - document-order - </para> - </entry> - <entry> - <para> - true - </para> - </entry> - <entry> - <para> - If true and the query does not contain an &apos;order by&apos; clause, result nodes will be in document order. For better performance set to &apos;false&apos; when queries return many nodes. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - result-fetch-size - </para> - </entry> - <entry> - <para> - Integer.MAX_VALUE - </para> - </entry> - <entry> - <para> - The number of results when a query is executed. Default value: <literal>Integer.MAX_VALUE</literal>. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - excerptprovider-class - </para> - </entry> - <entry> - <para> - DefaultXMLExcerpt - </para> - </entry> - <entry> - <para> - The name of the class that implements <literal>org.exoplatform.services.jcr.impl.core. query.lucene.ExcerptProvider</literal>. - </para> - <para> - This should be used for the <literal>rep:excerpt()</literal> function in a query. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - support-highlighting - </para> - </entry> - <entry> - <para> - false - </para> - </entry> - <entry> - <para> - If set to true additional information is stored in the index to support highlighting using the <literal>rep:excerpt()</literal> function. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - synonymprovider-class - </para> - </entry> - <entry> - <para> - none - </para> - </entry> - <entry> - <para> - The name of a class that implements <literal>org.exoplatform.services.jcr.impl.core. query.lucene.SynonymProvider</literal>. - </para> - <para> - The default value is null. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - synonymprovider-config-path - </para> - </entry> - <entry> - <para> - none - </para> - </entry> - <entry> - <para> - The path to the synonym provider configuration file. This path is interpreted relative to the path parameter. If there is a path element inside the <literal>SearchIndex</literal> element, then this path is interpreted relative to the root path of the path. Whether this parameter is mandatory depends on the synonym provider implementation. The default value is null. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - indexing-configuration-path - </para> - </entry> - <entry> - <para> - none - </para> - </entry> - <entry> - <para> - The path to the indexing configuration file. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - indexing-configuration-class - </para> - </entry> - <entry> - <para> - IndexingConfigurationImpl - </para> - </entry> - <entry> - <para> - The name of the class that implements <literal>org.exoplatform.services.jcr.impl.core. query.lucene.IndexingConfiguration</literal>. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - force-consistencycheck - </para> - </entry> - <entry> - <para> - false - </para> - </entry> - <entry> - <para> - If set to true a consistency check is performed depending on the parameter <literal>forceConsistencyCheck</literal>. If set to false no consistency check is performed on start up, even if a redo log had been applied. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - spellchecker-class - </para> - </entry> - <entry> - <para> - none - </para> - </entry> - <entry> - <para> - The name of a class that implements <literal>org.exoplatform.services.jcr.impl.core. query.lucene.SpellChecker</literal>. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - errorlog-size - </para> - </entry> - <entry> - <para> - 50(KB) - </para> - </entry> - <entry> - <para> - The default size of error log file in KB. - </para> - </entry> - <entry> 1.9 </entry> - </row> - <row> - <entry> - <para> - upgrade-index - </para> - </entry> - <entry> - <para> - false - </para> - </entry> - <entry> - <para> - Allows JCR to convert an existing index into the new format. It is also possible to set this property via system property. - </para> - <para> - Indexes prior to eXo JCR 1.12 will not run with eXo JCR 1.12. You must run an automatic migration. - </para> - <para> - Start eXo JCR with: - </para> - <programlisting><command> -Dupgrade-index=true</command></programlisting> - <para> - The old index format is then converted in the new index format. After the conversion the new format is used. - </para> - <para> - On subsequent starts this option is no longer needed. The old index is replaced and a back conversion is not possible - </para> - <para> - It is recommended that a backup of the index be made before conversion. (Only for migrations from JCR 1.9 and later.) - </para> - </entry> - <entry> 1.12 </entry> - </row> - <row> - <entry> - <para> - analyzer - </para> - </entry> - <entry> - <para> - org.apache.lucene.analysis. standard.StandardAnalyzer - </para> - </entry> - <entry> - <para> - Class name of a lucene analyzer to use for full-text indexing of text. - </para> - </entry> - <entry> 1.12 </entry> - </row> - </tbody> - </tgroup> - </table> - <section id="sect-Reference_Guide-Search_Configuration-Global_Search_Index"> - <title>Global Search Index</title> - <para> - By default eXo JCR uses the Lucene standard Analyzer to index contents. This analyzer uses some standard filters in the method that analyzes the content - </para> - <example> - <title>Standard Analyzed Filters</title> - <programlisting language="Java" role="Java"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_search-configuration/default62.java" parse="text"/></programlisting> - <para> - Comment #1: The first filter (StandardFilter) removes possessive apostrophes (<emphasis role="bold">&apos;s</emphasis>) from the end of words and removes periods (<emphasis role="bold">.</emphasis>) from acronyms. - </para> - <para> - Comment #2: The second filter (LowerCaseFilter) normalizes token text to lower case. - </para> - <para> - Comment #3: The last filter (StopFilter) removes stop words from a token stream. The stop set is defined in the analyzer. - </para> - </example> - <para> - The global search index is configured in the <filename><replaceable>JPP_HOME</replaceable>/gatein/gatein.ear/portal.war/WEB-INF/conf/jcr/repository-configuration.xml</filename> configuration file within the &quot;query-handler&quot; tag. - </para> - <programlisting language="XML" role="XML">&lt;query-handler class=&quot;org.exoplatform.services.jcr.impl.core.query.lucene.SearchIndex&quot;&gt; -</programlisting> - <para> - The same analyzer should always be used for indexing and for querying in lucene otherwise results may be unpredictable. eXo JCR does this automatically. The StandardAnalyzer (configured by default) can, however, be replaced with another. - </para> - <para> - A customized QueryHandler can also be easily created. - </para> - <formalpara id="form-Reference_Guide-Global_Search_Index-Customized_Search_Indexes_and_Analyzers"> - <title>Customized Search Indexes and Analyzers</title> - <para> - By default Exo JCR uses the Lucene standard Analyzer to index contents. This analyzer uses some standard filters in the method that analyzes the content: - </para> - </formalpara> - <programlisting language="Java" role="Java">public TokenStream tokenStream(String fieldName, Reader reader) { - StandardTokenizer tokenStream = new StandardTokenizer(reader, replaceInvalidAcronym); - tokenStream.setMaxTokenLength(maxTokenLength); - TokenStream result = new StandardFilter(tokenStream); - result = new LowerCaseFilter(result); - result = new StopFilter(result, stopSet); - return result; - }</programlisting> - <itemizedlist> - <listitem> - <para> - The first one (StandardFilter) removes &apos;s (as &apos;s in &quot;Peter&apos;s&quot;) from the end of words and removes dots from acronyms. - </para> - </listitem> - <listitem> - <para> - The second one (LowerCaseFilter) normalizes token text to lower case. - </para> - </listitem> - <listitem> - <para> - The last one (StopFilter) removes stop words from a token stream. The stop set is defined in the analyzer. - </para> - </listitem> - </itemizedlist> - <para> - Additional filters can be used in specific cases. The <phrase>ISOLatin1AccentFilter</phrase> filter, for example, which replaces accented characters in the ISO Latin 1 character set (ISO-8859-1) by their unaccented equivalents. - </para> - <para> - The <phrase>ISOLatin1AccentFilter</phrase> is not present in the current lucene version used by eXo. - </para> - <para> - In order to use a different filter, a new analyzer must be created, as well as new search index to use the analyzer. These are packaged into a jar file, which is then deployed with the application. - </para> - <procedure id="proc-Reference_Guide-Global_Search_Index-Create_a_new_filter_analyzer_and_search_index"> - <title>Create a new filter, analyzer and search index</title> - <step> - <para> - Create a new filter with the method: - </para> - <programlisting language="Java" role="JAVA">public final Token next(final Token reusableToken) throws java.io.IOException -</programlisting> - <para> - This defines how characters are read and used by the filter. - </para> - </step> - <step> - <para> - Create the analyzer. - </para> - <para> - The analyzer must extend <literal>org.apache.lucene.analysis.standard.StandardAnalyzer</literal> and overload the method. - </para> - <para> - Use the following to use new filters. - </para> - <programlisting language="Java" role="JAVA">public TokenStream tokenStream(String fieldName, Reader reader) -</programlisting> - </step> - <step> - <para> - To create the new search index, extend <literal>org.exoplatform.services.jcr.impl.core.query.lucene.SearchIndex</literal> and write the constructor to set the correct analyzer. - </para> - <para> - Use the method below to return your analyzer: - </para> - <programlisting language="Java" role="JAVA">public Analyzer getAnalyzer() { -return MyAnalyzer; -} -</programlisting> - </step> - </procedure> - <note> - <para> - In eXo JCR version 1.12 (and later) the analyzer can be directly set in the configuration. For users with this version the creation of a new SearchIndex for new analyzers is redundant. - </para> - </note> - <para> - To configure an application to use a new <literal>SearchIndex</literal>, replace the following code: - </para> - <programlisting language="XML" role="XML">&lt;query-handler class=&quot;org.exoplatform.services.jcr.impl.core.query.lucene.SearchIndex&quot;&gt; - -</programlisting> - <para> - in <filename><replaceable>JPP_HOME</replaceable>/gatein/gatein.ear/portal.war/WEB-INF/conf/jcr/repository-configuration.xml</filename> with the new class: - </para> - <programlisting language="XML" role="XML">&lt;query-handler class=&quot;mypackage.indexation.MySearchIndex&gt; - -</programlisting> - <para> - To configure an application to use a new analyzer, add the <parameter>analyzer</parameter> parameter to each query-handler configuration in <filename><replaceable>JPP_HOME</replaceable>/gatein/gatein.ear/portal.war/WEB-INF/conf/jcr/repository-configuration.xml</filename>: - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_search-configuration/default69.xml" parse="text"/></programlisting> - <para> - The new <literal>SearchIndex</literal> will start to index contents with the specified filters when the JCR is next started. - </para> - </section> - <section id="sect-Reference_Guide-Search_Configuration-IndexingConfiguration"> - <title>IndexingConfiguration</title> - <para> - From version 1.9, the default search index implementation in JCR allows user control over which properties of a node are indexed. Different analyzers can also be set for different nodes. - </para> - <para> - The configuration parameter is called <literal>indexingConfiguration</literal> and is not set by default. This means all properties of a node are indexed. - </para> - <para> - To configure the indexing behavior add a parameter to the query-handler element in your configuration file. - </para> - <programlisting language="XML" role="XML">&lt;param name=&quot;indexing-configuration-path&quot; value=&quot;/indexing_configuration.xml&quot;/&gt; - -</programlisting> - <formalpara id="form-Reference_Guide-IndexingConfiguration-Node_Scope_Limit"> - <title>Node Scope Limit</title> - <para> - The node scope can be limited so that only certain properties of a node type are indexed. This can optimize the index size. - </para> - </formalpara> - <para> - With the configuration below only properties named <parameter>Text</parameter> are indexed for <parameter>nt:unstructured</parameter> node types. This configuration also applies to all nodes whose type extends from <parameter>nt:unstructured</parameter>. - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_search-configuration/default71.xml" parse="text"/></programlisting> - <note> - <title>Namespace Prefixes</title> - <para> - The <phrase>namespace prefixes</phrase> must be declared throughout the XML file in the configuration element that is being used. - </para> - </note> - <formalpara id="form-Reference_Guide-IndexingConfiguration-Indexing_Boost_Value"> - <title>Indexing Boost Value</title> - <para> - It is also possible to configure a <phrase>boost value</phrase> for the nodes that match the index rule. The default boost value is 1.0. Higher boost values (a reasonable range is 1.0 - 5.0) will yield a higher score value and appear as more relevant. - </para> - </formalpara> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_search-configuration/default72.xml" parse="text"/></programlisting> - <para> - If you do not wish to boost the complete node, but only certain properties, you can also provide a boost value for the listed properties: - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_search-configuration/default73.xml" parse="text"/></programlisting> - <formalpara id="form-Reference_Guide-IndexingConfiguration-Conditional_Index_Rules"> - <title>Conditional Index Rules</title> - <para> - You may also add a <phrase>condition</phrase> to the index rule and have multiple rules with the same nodeType. The first index rule that matches will apply and all remaining ones are ignored: - </para> - </formalpara> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_search-configuration/default74.xml" parse="text"/></programlisting> - <para> - In the above example the first rule only applies if the <parameter>nt:unstructured</parameter> node has a priority property with a value <parameter>high</parameter>. The condition syntax only supports the equals operator and a string literal. - </para> - <para> - Properties may also be referenced on the condition that are not on the current node: - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_search-configuration/default75.xml" parse="text"/></programlisting> - <para> - The indexing configuration allows the type of a node in the condition to be specified. Please note however that the type match must be exact. It does not consider sub types of the specified node type. - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_search-configuration/default76.xml" parse="text"/></programlisting> - <formalpara id="form-Reference_Guide-IndexingConfiguration-Exclusion_from_the_Node_Scope_Index"> - <title>Exclusion from the Node Scope Index</title> - <para> - All configured properties are full-text indexed by default (if they are of type STRING and included in the node scope index). - </para> - </formalpara> - <para> - A node scope search normally finds all nodes of an index. That is to say; <literal>jcr:contains(., &apos;foo&apos;)</literal> returns all nodes that have a string property containing the word &apos;<replaceable>foo</replaceable>&apos;. - </para> - <para> - Properties can be explicitly excluded from the node scope index with: - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_search-configuration/default77.xml" parse="text"/></programlisting> - <formalpara id="form-Reference_Guide-IndexingConfiguration-Index_Aggregates"> - <title>Index Aggregates</title> - <para> - Sometimes it is useful to include the contents of descendant nodes into a single node to more easily search on content that is scattered across multiple nodes. - </para> - </formalpara> - <para> - JCR allows the definition of index aggregates based on relative path patterns and primary node types. - </para> - <para> - The following example creates an index aggregate on <literal>nt:file</literal> that includes the content of the jcr:content node: - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_search-configuration/default78.xml" parse="text"/></programlisting> - <para> - Included nodes can also be restricted to a certain type: - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_search-configuration/default79.xml" parse="text"/></programlisting> - <para> - The <emphasis role="bold">*</emphasis> wild-card can be used to match all child nodes: - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_search-configuration/default80.xml" parse="text"/></programlisting> - <para> - Nodes to a certain depth below the current node can be included by adding multiple include elements. The <parameter>nt:file</parameter> node may contain a complete XML document under jcr:content for example: - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_search-configuration/default81.xml" parse="text"/></programlisting> - <formalpara id="form-Reference_Guide-IndexingConfiguration-Property_Level_Analyzers"> - <title>Property-Level Analyzers</title> - <para> - How a property has to be analyzed can be defined in the following configuration section. If there is an analyzer configuration for a property, this analyzer is used for indexing and searching of this property. For example: - </para> - </formalpara> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_search-configuration/default82.xml" parse="text"/></programlisting> - <para> - The configuration above sets lucene <emphasis role="bold">KeywordAnalyzer</emphasis> to index and search the property &quot;<replaceable>mytext</replaceable>&quot; across the entire workspace while the &quot;<replaceable>mytext2</replaceable>&quot; property is searched with the <emphasis role="bold">WhitespaceAnalyzer</emphasis>. - </para> - <para> - The <emphasis role="bold">WhitespaceAnalyzer</emphasis> tokenizes a property, the <emphasis role="bold">KeywordAnalyzer</emphasis> takes the property as a whole. - </para> - <para> - Using different analyzers for different languages can be particularly useful. - </para> - <formalpara id="form-Reference_Guide-IndexingConfiguration-Characteristics_of_Node_Scope_Searches"> - <title>Characteristics of Node Scope Searches</title> - <para> - Unexpected behavior may be encountered when using analyzers to search within a <emphasis>property</emphasis> compared to searching within a <emphasis>node scope</emphasis>. This is because the node scope always uses the global analyzer. - </para> - </formalpara> - <para> - For example: the property &quot;<parameter>mytext</parameter>&quot; contains the text; &quot;<emphasis>testing my analyzers</emphasis>&quot; but no analyzers have been configured for this property (and the default analyzer in SearchIndex has not been changed). - </para> - <para> - If the query is: - </para> - <programlisting language="Java" role="JAVA">xpath = &quot;//*[jcr:contains(mytext,&apos;analyzer&apos;)]&quot; -</programlisting> - <para> - The <literal>xpath</literal> does not return a result in the node with the property above and default analyzers. - </para> - <para> - Also, if a search is done on the node scope as follows: - </para> - <programlisting language="Java" role="JAVA">xpath = &quot;//*[jcr:contains(.,&apos;analyzer&apos;)]&quot; -</programlisting> - <para> - No result will be returned. - </para> - <para> - Only specific analyzers can be set on a node property, and the node scope indexing and analyzing is always done with the globally defined analyzer in the SearchIndex element. - </para> - <para> - If the analyzer used to index the &quot;mytext&quot; property above is changed to: - </para> - <programlisting language="XML" role="XML">&lt;analyzer class=&quot;org.apache.lucene.analysis.Analyzer.GermanAnalyzer&quot;&gt; -&lt;property&gt;mytext&lt;/property&gt; -&lt;/analyzer&gt; -</programlisting> - <para> - The search below would return a result because of the word stemming (analyzers - analyzer). - </para> - <programlisting language="Java" role="JAVA">xpath = &quot;//*[jcr:contains(mytext,&apos;analyzer&apos;)]&quot; -</programlisting> - <para> - The second search in the example: - </para> - <programlisting language="Java" role="JAVA">xpath = &quot;//*[jcr:contains(.,&apos;analyzer&apos;)]&quot; -</programlisting> - <para> - Would still not give a result, since the node scope is indexed with the global analyzer, which in this case does not take into account any word stemming. - </para> - <para> - Be aware that when using analyzers for specific properties, a result may be found in a property for certain search text, but the same search text in the node scope of the property may not find a result. - </para> - <note> - <para> - Both index rules and index aggregates influence how content is indexed in JCR. If the configuration is changed, the existing content is not automatically re-indexed according to the new rules. - </para> - <para> - Content must be manually re-indexed when the configuration is changed. - </para> - </note> - </section> - <section id="sect-Reference_Guide-Search_Configuration-Advanced_features"> - <title>Advanced features</title> - <para> - eXo JCR supports some advanced features, which are not specified in JSR 170: - </para> - <itemizedlist> - <listitem> - <para> - Get a text excerpt with <emphasis role="bold">highlighted words</emphasis> that matches the query: <xref linkend="sect-Reference_Guide-Highlighting-DefaultXMLExcerpt"/>&gt;. - </para> - </listitem> - <listitem> - <para> - Search a term and its <emphasis role="bold">synonyms</emphasis>: <xref linkend="sect-Reference_Guide-Searching_Repository_Content-SynonymSearch"/>. - </para> - </listitem> - <listitem> - <para> - Search <emphasis role="bold">similar</emphasis> nodes: <xref linkend="sect-Reference_Guide-Searching_Repository_Content-Similarity"/>. - </para> - </listitem> - <listitem> - <para> - Check <emphasis role="bold">spelling</emphasis> of a full text query statement: <xref linkend="sect-Reference_Guide-Searching_Repository_Content-SpellChecker"/>. - </para> - </listitem> - <listitem> - <para> - Define index <emphasis role="bold">aggregates and rules</emphasis>: IndexingConfiguration. - </para> - </listitem> - </itemizedlist> - </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-JDBC_Data_Container_Config"> - <title>Configuring the JDBC Data Container</title> - <section id="sect-Reference_Guide-JDBC_Data_Container_Config-Introduction"> - <title>Introduction</title> - <para> - eXo JCR persistent data container can work in two configuration modes: - </para> - <itemizedlist> - <listitem> - <para> - <phrase>Multi-database</phrase>: One database for each workspace (used in standalone eXo JCR service mode) - </para> - </listitem> - <listitem> - <para> - <phrase>Single-database</phrase>: All workspaces persisted in one database (used in embedded eXo JCR service mode, e.g. in eXo portal) - </para> - </listitem> - </itemizedlist> - <para> - The data container uses the JDBC driver to communicate with the actual database software, i.e. any JDBC-enabled data storage can be used with eXo JCR implementation. - </para> - <para> - Currently the data container is tested with the following RDBMS: - </para> -<!-- Source Metadata -URL: NA (email from Nicholas Filetto to jbossexoD(a)googlegroups.com on 10/18/2011 -Author [w/email]: Nicholas Filetto: nicolas.filotto(a)exoplatform.com -License: NA - --> <table id="tabl-Reference_Guide-Introduction-Supported-databases"> - <title>Supported databases</title> - <tgroup cols="2"> - <thead> - <row> - <entry> Database </entry> - <entry> Driver Version </entry> - </row> - </thead> - <tbody> - <row> - <entry> IBM DB2 9.7 (FP5) </entry> - <entry> IBM DB2 JDBC Universal Driver Architecture 4.13.80 </entry> - </row> - <row> - <entry> Oracle 11g R1 (11.1.0.7.0) </entry> - <entry> Oracle JDBC Driver 11.1.0.7 </entry> - </row> - <row> - <entry> Oracle 11g R1 RAC (11.1.0.7.0) </entry> - <entry> Oracle JDBC Driver 11.1.0.7 </entry> - </row> - <row> - <entry> Oracle 11g R2 (11.2.0.3.0) </entry> - <entry> Oracle JDBC Driver v11.2.0.3.0 </entry> - </row> - <row> - <entry> Oracle 11g R2 RAC (11.2.0.3.0) </entry> - <entry> Oracle JDBC Driver v11.2.0.3.0 </entry> - </row> - <row> - <entry> MySQL 5.1 </entry> - <entry> MySQL Connector/J 5.1.21 </entry> - </row> - <row> - <entry> MySQL 5.5 </entry> - <entry> MySQL Connector/J 5.1.21 </entry> - </row> - <row> - <entry> Microsoft SQL Server 2008 </entry> - <entry> Microsoft SQL Server JDBC Driver 3.0.1301.101, Microsoft SQL Server JDBC Driver 4.0.2206.100 </entry> - </row> - <row> - <entry> Microsoft SQL Server 2008 R2 </entry> - <entry> Microsoft SQL Server JDBC Driver 3.0.1301.101, Microsoft SQL Server JDBC Driver 4.0.2206.100 </entry> - </row> - <row> - <entry> PostgreSQL 8.4.8 </entry> - <entry> JDBC4 Postgresql Driver, Version 8.4-703 </entry> - </row> - <row> - <entry> PostgreSQL 9.1.0 </entry> - <entry> JDBC4 Postgresql Driver, Version 9.1-903 </entry> - </row> - <row> - <entry> Sybase ASE 15.7 </entry> - <entry> Sybase jConnect JDBC driver v7 </entry> - </row> - </tbody> - </tgroup> - </table> - <note> - <title>Isolation Levels</title> - <para> - The JCR requires at least the <parameter>READ_COMMITED</parameter> isolation level and other RDBMS configurations can cause some side-effects and issues. So, please, make sure proper isolation level is configured on database server side. - </para> - </note> - <note> - <para> - One more mandatory JCR requirement for underlying databases is a case sensitive collation. Microsoft SQL Server both 2005 and 2008 customers must configure their server with collation corresponding to personal needs and requirements, but obligatorily case sensitive. For more information please refer to Microsoft SQL Server documentation page &quot;Selecting a SQL Server Collation&quot; <ulink url="http://msdn.microsoft.com/en-us/library/ms144250.aspx">... - </para> - </note> - <note> - <para> - Be aware that JCR does not support MyISAM storage engine for the MySQL relational database management system. - </para> - </note> - <para> - Each database software supports ANSI SQL standards but also has its own specifics. Therefore each database has its own configuration setting in the eXo JCR as a database dialect parameter. More detailed configuration of the database can be set by editing the metadata SQL-script files. - </para> - <remark>NEEDINFO - FILE PATHS - The path needs to be updated with the equivalent path for JBoss Portal Platform instead of gatein, please see below para. New info required?</remark> - <para> - You can find SQL-scripts in <filename>conf/storage/</filename> directory of the <filename><replaceable>JPP_HOME</replaceable>/modules/org/gatein/lib/main/exo.jcr.component.core-&JCR_VERSION;.jar</filename> file . - </para> - <para> - The following tables show the correspondence between the scripts and databases: - </para> - <table id="tabl-Reference_Guide-Introduction-Single_database"> - <title>Single-database</title> - <tgroup cols="2"> - <thead> - <row> - <entry> Database </entry> - <entry> Script </entry> - </row> - </thead> - <tbody> - <row> - <entry> MySQL DB </entry> - <entry> - <filename>jcr-sjdbc.mysql.sql</filename> - </entry> - </row> - <row> - <entry> MySQL DB with utf-8 </entry> - <entry> - <filename>jcr-sjdbc.mysql-utf8.sql</filename> - </entry> - </row> - <row> - <entry> PostgresSQL </entry> - <entry> - <filename>jcr-sjdbc.pqsql.sql</filename> - </entry> - </row> - <row> - <entry> Oracle DB </entry> - <entry> - <filename>jcr-sjdbc.ora.sql</filename> - </entry> - </row> - <row> - <entry> DB2 9.7 </entry> - <entry> - <filename>jcr-sjdbc.db2.sql</filename> - </entry> - </row> - <row> - <entry> MS SQL Server </entry> - <entry> - <filename>jcr-sjdbc.mssql.sql</filename> - </entry> - </row> - <row> - <entry> Sybase </entry> - <entry> - <filename>jcr-sjdbc.sybase.sql</filename> - </entry> - </row> - <row> - <entry> HSQLDB </entry> - <entry> - <filename>jcr-sjdbc.sql</filename> - </entry> - </row> - </tbody> - </tgroup> - </table> - <table id="tabl-Reference_Guide-Introduction-Multi_database"> - <title>Multi-database</title> - <tgroup cols="2"> - <thead> - <row> - <entry> Database </entry> - <entry> Script </entry> - </row> - </thead> - <tbody> - <row> - <entry> MySQL DB </entry> - <entry> - <filename>jcr-mjdbc.mysql.sql</filename> - </entry> - </row> - <row> - <entry> MySQL DB with utf-8 </entry> - <entry> - <filename>jcr-mjdbc.mysql-utf8.sql</filename> - </entry> - </row> - <row> - <entry> PostgresSQL </entry> - <entry> - <filename>jcr-mjdbc.pqsql.sql</filename> - </entry> - </row> - <row> - <entry> Oracle DB </entry> - <entry> - <filename>jcr-mjdbc.ora.sql</filename> - </entry> - </row> - <row> - <entry> DB2 9.7 </entry> - <entry> - <filename>jcr-mjdbc.db2.sql</filename> - </entry> - </row> - <row> - <entry> MS SQL Server </entry> - <entry> - <filename>jcr-mjdbc.mssql.sql</filename> - </entry> - </row> - <row> - <entry> Sybase </entry> - <entry> - <filename>jcr-mjdbc.sybase.sql</filename> - </entry> - </row> - <row> - <entry> HSQLDB </entry> - <entry> - <filename>jcr-mjdbc.sql</filename> - </entry> - </row> - </tbody> - </tgroup> - </table> - <para> - If a non-ANSI node name is used, you must use a database with MultiLanguage support. Some JDBC drivers need additional parameters for establishing a Unicode friendly connection. For example under mysql it is necessary to add an additional parameter for the JDBC driver at the end of JDBC URL: - </para> - <para> - There are preconfigured configuration files for HSQLDB. Look for these files in /conf/portal and /conf/standalone folders of the jar-file <package>exo.jcr.component.core-&JCR_VERSION;.jar</package> or source-distribution of eXo JCR implementation. - </para> - <example id="exam-Reference_Guide-Introduction-Example_Parameter"> - <title>Example Parameter</title> - <programlisting><code>jdbc:mysql://exoua.dnsalias.net/portal?char... - </example> - <para> - The configuration files are located in service jars <filename>/conf/portal/configuration.xml</filename> (eXo services including JCR Repository Service) and <filename>exo-jcr-config.xml</filename> (repositories configuration) by default. In JBoss Portal Platform, the JCR is configured in portal web application <filename>portal/WEB-INF/conf/jcr/jcr-configuration.xml</filename> (JCR Repository Service and related services) and <filename>repository-configuration.xml</filename> (repositories configuration). - </para> - <para> - Read more about <xref linkend="chap-Reference_Guide-JCR_configuration"/>. - </para> - </section> - <section id="sect-Reference_Guide-JDBC_Data_Container_Config-Multi_database_Configuration"> - <title>Multi-database Configuration</title> - <para> - You need to configure each workspace in a repository as part of multi-database configuration. Databases may reside on remote servers as required. - </para> - <procedure> - <title/> - <step> - <para> - Configure the data containers in the <literal>org.exoplatform.services.naming.InitialContextInitializer</literal> service. It&apos;s the JNDI context initializer which registers (binds) naming resources (DataSources) for data containers. - </para> - <para> - For example (two data containers <parameter>jdbcjcr</parameter> - local HSQLDB, <parameter>jdbcjcr1</parameter> - remote MySQL): - </para> - <programlisting language="XML" role="XML"> -<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_Configuration/example-1.xml" parse="text"/></programlisting> - <substeps> - <step> - <para> - Configure the database connection parameters: - </para> - <itemizedlist> - <listitem> - <para> - <parameter>driverClassName</parameter>, e.g. &quot;org.hsqldb.jdbcDriver&quot;, &quot;com.mysql.jdbc.Driver&quot;, &quot;org.postgresql.Driver&quot; - </para> - </listitem> - <listitem> - <para> - <parameter>url</parameter>, e.g. &quot;jdbc:hsqldb:file:target/temp/data/portal&quot;, &quot;jdbc:mysql://exoua.dnsalias.net/jcr&quot; - </para> - </listitem> - <listitem> - <para> - <parameter>username</parameter>, e.g. &quot;sa&quot;, &quot;exoadmin&quot; - </para> - </listitem> - <listitem> - <para> - <parameter>password</parameter>, e.g. &quot;&quot;, &quot;exo12321&quot; - </para> - </listitem> - </itemizedlist> - </step> - </substeps> - <para> - There can be connection pool configuration parameters (org.apache.commons.dbcp.BasicDataSourceFactory): - </para> - <itemizedlist> - <listitem> - <para> - <parameter>maxActive</parameter>, e.g. 50 - </para> - </listitem> - <listitem> - <para> - <parameter>maxIdle</parameter>, e.g. 5 - </para> - </listitem> - <listitem> - <para> - <parameter>initialSize</parameter>, e.g. 5 - </para> - </listitem> - <listitem> - <para> - and other according to <ulink url="http://jakarta.apache.org/commons/dbcp/configuration.html"... DBCP configuration</ulink> - </para> - </listitem> - </itemizedlist> - </step> - <step> - <para> - Configure the repository service. Each workspace will be configured for its own data container. - </para> - <para> - For example (two workspaces <parameter>ws</parameter> - jdbcjcr, <parameter>ws1</parameter> - jdbcjcr1): - </para> - <programlisting language="XML" role="XML"> -<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_Configuration/example-2.xml" parse="text"/></programlisting> - <itemizedlist> - <listitem> - <para> - <parameter>source-name</parameter>: A javax.sql.DataSource name configured in InitialContextInitializer component (was <parameter>sourceName</parameter> prior JCR 1.9); - </para> - </listitem> - <listitem> - <para> - <parameter>dialect</parameter>: A database dialect, one of <literal>hsqldb</literal>, <literal>mysql</literal>, <literal>mysql-utf8</literal>, <literal>pgsql</literal>, <literal>oracle</literal>, <literal>oracle-oci</literal>, <literal>mssql</literal>, <literal>sybase</literal>, <literal>derby</literal>, <literal>db2</literal>, <literal>db2v8</literal> or <literal>auto</literal> for dialect autodetection; - </para> - </listitem> - <listitem> - <para> - <parameter>multi-db</parameter>: Enable multi-database container with this parameter (set value &quot;true&quot;); - </para> - </listitem> - <listitem> - <para> - <parameter>max-buffer-size: A</parameter> a threshold (in bytes) after which a <literal>javax.jcr.Value</literal> content will be swapped to a file in a temporary storage. A swap for pending changes, for example. - </para> - </listitem> - <listitem> - <para> - <parameter>swap-directory</parameter>: A path in the file system used to swap the pending changes. - </para> - </listitem> - </itemizedlist> - </step> - </procedure> - <para> - This procedure configures two workspace which will be persistent in two different databases (<emphasis>ws</emphasis> in HSQLDB and <emphasis>ws1</emphasis> in MySQL). - </para> - </section> - <section id="sect-Reference_Guide-JDBC_Data_Container_Config-Single_database_Configuration"> - <title>Single-database Configuration</title> - <para> - Configuring a single-database data container is easier than configuring a multi-database data container as only one naming resource must be configured. - </para> - <example id="exam-Reference_Guide-Single_database_Configuration-jdbcjcr_Data_Container"> - <title><parameter>jdbcjcr</parameter> Data Container</title> - <programlisting language="XML" role="XML"> -<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_Configuration/example-3.xml" parse="text"/></programlisting> - </example> - <para> - Configure repository workspaces with this one database. The <parameter>multi-db</parameter> parameter must be set as <literal>false</literal>. - </para> - <para> - For example (two workspaces <parameter>ws</parameter> - <literal>jdbcjcr</literal>, <parameter>ws1</parameter> - <literal>jdbcjcr</literal>): - </para> - <example id="exam-Reference_Guide-Single_database_Configuration-Example"> - <title>Example</title> - <programlisting language="XML" role="XML"> -<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_Configuration/example-4.xml" parse="text"/></programlisting> - </example> - <para> - This configures two persistent workspaces in one database (PostgreSQL). - </para> - <section id="sect-Reference_Guide-Single_database_Configuration-Configuration_without_DataSource"> - <title>Configuration without DataSource</title> - <para> - It is possible to configure the repository without binding <literal>javax.sql.DataSource</literal> in the JNDI service if you have a dedicated JDBC driver implementation with special features like XA transactions, statements/connections pooling etc: - </para> - <procedure> - <title/> - <step> - <para> - Remove the configuration in <literal>InitialContextInitializer</literal> for your database and configure a new one directly in the workspace container. - </para> - </step> - <step> - <para> - Remove parameter <parameter>source-name</parameter> and add next lines instead. Describe your values for a JDBC driver, database URL and username. - </para> - </step> - </procedure> - <warning> - <title>Connection Pooling</title> - <para> - Ensure the JDBC driver provides connection pooling. Connection pooling is strongly recommended for use with the JCR to prevent a database overload. - </para> - </warning> - <programlisting language="XML" role="XML">&lt;workspace name=&quot;ws&quot; auto-init-root-nodetype=&quot;nt:unstructured&quot;&gt; - &lt;container class=&quot;org.exoplatform.services.jcr.impl.storage.jdbc.JDBCWorkspaceDataContainer&quot;&gt; - &lt;properties&gt; - &lt;property name=&quot;dialect&quot; value=&quot;hsqldb&quot;/&gt; - &lt;property name=&quot;driverliteral&quot; value=&quot;org.hsqldb.jdbcDriver&quot;/&gt; - &lt;property name=&quot;url&quot; value=&quot;jdbc:hsqldb:file:target/temp/data/portal&quot;/&gt; - &lt;property name=&quot;username&quot; value=&quot;su&quot;/&gt; - &lt;property name=&quot;password&quot; value=&quot;&quot;/&gt; - ......</programlisting> - </section> - <section id="sect-Reference_Guide-Single_database_Configuration-Dynamic_Workspace_Creation"> - <title>Dynamic Workspace Creation</title> - <para> - Workspaces can be added dynamically during runtime. - </para> - <para> - This can be performed in two steps: - </para> - <procedure> - <title/> - <step> - <para> - <literal>ManageableRepository.configWorkspace(WorkspaceEntry wsConfig)</literal>: Register a new configuration in RepositoryContainer and create a WorkspaceContainer. - </para> - </step> - <step> - <para> - <literal>ManageableRepository.createWorkspace(String workspaceName)</literal>: Creation a new workspace. - </para> - </step> - </procedure> - </section> - </section> - <section id="sect-Reference_Guide-JDBC_Data_Container_Config-Simple_and_Complex_queries"> - <title>Simple and Complex queries</title> - <para> - eXo JCR provides two ways to interact with the database; - </para> - <variablelist> - <title/> - <varlistentry> - <term> - <literal>JDBCStorageConnection</literal> - </term> - <listitem> - <para> - Which uses simple queries. Simple queries do not use sub queries, left or right joins. They are implemented in such a way as to support as many database dialects as possible. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term> - <literal>CQJDBCStorageConection</literal> - </term> - <listitem> - <para> - Which uses complex queries. Complex queries are optimized to reduce the number of database calls. - </para> - </listitem> - </varlistentry> - </variablelist> - <para> - Simple queries will be used if you chose <literal>org.exoplatform.services.jcr.impl.storage.jdbc.JDBCWorkspaceDataContainer</literal>: - </para> - <programlisting language="XML" role="XML">&lt;workspaces&gt; - &lt;workspace name=&quot;ws&quot; auto-init-root-nodetype=&quot;nt:unstructured&quot;&gt; - &lt;container class=&quot;org.exoplatform.services.jcr.impl.storage.jdbc.JDBCWorkspaceDataContainer&quot;&gt; - ... - &lt;/workspace&gt; -&lt;/worksapces&gt; -</programlisting> - <para> - Complex queries will be used if you chose <literal>org.exoplatform.services.jcr.impl.storage.jdbc.optimisation.CQJDBCWorkspaceDataContainer</literal>: - </para> - <programlisting language="XML" role="XML">&lt;workspaces&gt; - &lt;workspace name=&quot;ws&quot; auto-init-root-nodetype=&quot;nt:unstructured&quot;&gt; - &lt;container class=&quot;org.exoplatform.services.jcr.impl.storage.jdbc.optimisation.CQJDBCWorkspaceDataContainer&quot;&gt; - ... - &lt;/workspace&gt; -&lt;/worksapces&gt;</programlisting> - </section> - <section id="sect-Reference_Guide-JDBC_Data_Container_Config-Force_Query_Hints"> - <title>Force Query Hints</title> - <para> - Some databases, such as Oracle and MySQL, support hints to increase query performance. The eXo JCR has separate Complex Query implementations for the Orcale database dialect, which uses query hints to increase performance for few important queries. - </para> - <para> - To enable this option, use the following configuration property: - </para> - <programlisting language="XML" role="XML">&lt;workspace name=&quot;ws&quot; auto-init-root-nodetype=&quot;nt:unstructured&quot;&gt; - &lt;container class=&quot;org.exoplatform.services.jcr.impl.storage.jdbc.JDBCWorkspaceDataContainer&quot;&gt; - &lt;properties&gt; - &lt;property name=&quot;dialect&quot; value=&quot;oracle&quot;/&gt; - &lt;property name=&quot;force.query.hints&quot; value=&quot;true&quot; /&gt; - ......</programlisting> - <para> - Query hints are only used for Complex Queries with the Oracle dialect. For all other dialects this parameter is ignored. - </para> - </section> - <section id="sect-Reference_Guide-JDBC_Data_Container_Config-Notes_for_Microsoft_Windows_users"> - <title>Notes for Microsoft Windows users</title> - <para> - The current configuration of eXo JCR uses <ulink url="http://commons.apache.org/dbcp/">Apache DBCP</ulink> connection pool (<literal>org.apache.commons.dbcp.BasicDataSourceFactory</literal>). - </para> - <para> - It is possible to set a high value for the <parameter>maxActive</parameter> parameter in the <filename>configuration.xml</filename> file. This creates a high use of TCP/IP ports from a client machine inside the pool (the JDBC driver, for example). As a result, the data container can throw exceptions like &quot;<emphasis>Address already in use</emphasis>&quot;. - </para> - <para> - To solve this problem, you must configure the client&apos;s machine networking software to use shorter timeouts for open TCP/IP ports. - </para> - <para> - This is done by editing two registry keys within the <parameter>HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters</parameter> node. Both of these keys are unset by default. To set the keys as required: - </para> - <procedure> - <title/> - <step> - <para> - Set the <parameter>MaxUserPort</parameter> registry key to <parameter>=dword:00001b58</parameter>. This sets the maximum of open ports to 7000 or higher (the default is 5000). - </para> - </step> - <step> - <para> - Set <parameter>TcpTimedWaitDelay</parameter> to <parameter>=dword:0000001e</parameter>. This sets <parameter>TIME_WAIT</parameter> parameter to 30 seconds (the default is 240). - </para> - </step> - </procedure> - <example id="exam-Reference_Guide-Notes_for_Microsoft_Windows_users-Sample_Registry_File"> - <title>Sample Registry File</title> - <programlisting>Windows Registry Editor Version 5.00 - -[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters] -&quot;MaxUserPort&quot;=dword:00001b58 -&quot;TcpTimedWaitDelay&quot;=dword:0000001e</programlisting> - </example> - </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-External_Value_Storages"> - <title>External Value Storages</title> - <section id="sect-Reference_Guide-External_Value_Storages-Introduction"> - <title>Introduction</title> - <para> - JCR values are stored in the Workspace Data container by default. The eXo JCR offers an additional option of storing JCR values separately from the Workspace Data container which can help keep Binary Large Objects (BLOBs) separate. - </para> -<!-- <para> - Value storage configuration is a part of the repository configuration. Refer to <xref linkend="sect-Reference_Guide-JCR_configuration-Example_of_the_portal_system_workspace" /> for more details. - </para> --> <para> - Tree-based storage is recommended in most cases. - </para> -<!-- Not sure this is necessary -<para> -If you run an application on Amazon EC2 - the S3 option may be interesting for architecture. Simple 'flat' storage is good in speed of creation/deletion of values, it might be a compromise for a small storages. -</para> --> </section> - <section id="sect-Reference_Guide-External_Value_Storages-Tree_File_Value_Storage"> - <title>Tree File Value Storage</title> - <para> - Tree File Value Storage holds values in tree-like file system files. <property>Path</property> property points to the root directory to store the files. - </para> - <para> - This is a recommended type of external storage because it can contain large amount of files limited only by disk/volume free space. - </para> - <para> - However, using Tree File Value Storage can result in a higher time on value deletion, due to the removal of unused tree-nodes. - </para> - <example> - <title>Tree File Value Storage Configuration</title> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_external-value-storages/default25.xml" parse="text"/></programlisting> - <para> - Comment #1: The <emphasis role="bold">id</emphasis> is the value storage unique identifier, used for linking with properties stored in a workspace container. - </para> - <para> - Comment #2: the <emphasis role="bold">path</emphasis> is a location where value files will be stored. - </para> - </example> - <para> - Each file value storage can have the <function>filters</function> for incoming values. A filter can match values by <property>property-type</property>, <property>property-name</property>, <property>ancestor-path</property>. It can also match the size of values stored (<property>min-value-size</property>) in bytes. - </para> - <para> - In the previous example a filter with <property>property-type</property> and <property>min-value-size</property> has been used. This results in storage for binary values with size greater of 1MB. - </para> - <para> - It is recommended that properties with large values are stored in file value storage only. - </para> - <para> - The example below shows a value storage with different locations for large files (<property>min-value-size</property> a 20Mb-sized filter). - </para> - <para> - A value storage uses ORed logic in the process of filter selection. This means the first filter in the list will be called first and if it is not matched the next will be called, and so on. - </para> - <para> - In this example a value matches the 20MB filter <property>min-value-size</property> and will be stored in the path &quot;<literal>data/20Mvalues</literal>&quot;. All other filters will be stored in &quot;<literal>data/values</literal>&quot;. - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../../extras/Advanced_Development_JCR_external-value-storages/default26.xml" parse="text"/></programlisting> - </section> - <section id="sect-Reference_Guide-External_Value_Storages-Disabling_value_storage"> - <title>Disabling value storage</title> - <para> - The JCR allows you to disable value storage by adding the following property into its configuration. - </para> - <programlisting language="XML">&lt;property name=&quot;enabled&quot; value=&quot;false&quot; /&gt;</programlisting> - <warning> - <title>Warning</title> - <para> - It is recommended that this functionality be used for internal and testing purpose only, and with caution, as all stored values will be inaccessible. - </para> - </warning> - </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-Workspace_Data_Container"> - <title>Workspace Data Container</title> - <para> - Each Workspace of the JCR has its own persistent storage to hold that workspace&apos;s items data. The eXo JCR can be configured so that it can use one or more workspaces that are logical units of the repository content. - </para> - <para> - The physical data storage mechanism is configured using mandatory element <emphasis role="bold">container</emphasis>. The type of container is described in the attribute <parameter>class = <replaceable>fully_qualified_name_of_org.exoplatform.services.jcr.storage.WorkspaceDataContainer_subclass</replaceable></parameter>. - </para> - <example> - <title>Physical Data Storage Configuration</title> - <programlisting language="XML" role="XML">&lt;container class=&quot;org.exoplatform.services.jcr.impl.storage.jdbc.JDBCWorkspaceDataContainer&quot;&gt; - &lt;properties&gt; - &lt;property name=&quot;source-name&quot; value=&quot;jdbcjcr1&quot;/&gt; - &lt;property name=&quot;dialect&quot; value=&quot;hsqldb&quot;/&gt; - &lt;property name=&quot;multi-db&quot; value=&quot;true&quot;/&gt; - &lt;property name=&quot;max-buffer-size&quot; value=&quot;200K&quot;/&gt; - &lt;property name=&quot;swap-directory&quot; value=&quot;target/temp/swap/ws&quot;/&gt; - &lt;property name=&quot;lazy-node-iterator-page-size&quot; value=&quot;50&quot;/&gt; - &lt;property name=&quot;acl-bloomfilter-false-positive-probability&quot; value=&quot;0.1d&quot;/&gt; - &lt;property name=&quot;acl-bloomfilter-elements-number&quot; value=&quot;1000000&quot;/&gt; - &lt;/properties&gt;</programlisting> - <para> - <literal>source-name</literal>: The JDBC data source name which is registered in JDNI by InitialContextInitializer. This was known as <literal>sourceName</literal> in versions prior to 1.9. - </para> - <para> - <literal>dialect</literal>: The database dialect. Must be one of the following: <literal>hsqldb</literal>, <literal>mysql</literal>, <literal>mysql-utf8</literal>, <literal>pgsql</literal>, <literal>oracle</literal>, <literal>oracle-oci</literal>, <literal>mssql</literal>, <literal>sybase</literal>, <literal>derby</literal>, <literal>db2</literal> or <literal>db2v8</literal>). - </para> - <para> - <literal>multi-db</literal>: This parameter, if <literal>true</literal>, enables multi-database container. - </para> - <para> - <literal>max-buffer-size</literal>: A threshold in bytes. If a value size is greater than this setting, then it will be spooled to a temporary file. - </para> - <para> - <literal>swap-directory</literal>: A location where the value will be spooled if no value storage is configured but a <literal>max-buffer-size</literal> is exceeded. - </para> - <para> - <literal>lazy-node-iterator-page-size</literal>: &quot;Lazy&quot; child nodes iterator settings. Defines size of page, the number of nodes that are retrieved from persistent storage at once. - </para> - <para> - <literal>acl-bloomfilter-false-positive-probability</literal>: ACL Bloom-filter settings. ACL Bloom-filter desired false positive probability. Range [0..1]. Default value 0.1d. - </para> - <para> - <literal>acl-bloomfilter-elements-number</literal>: ACL Bloom-filter settings. Expected number of ACL-elements in the Bloom-filter. Default value 1000000. - </para> - </example> - <note> - <para> - Bloom filters are not supported by all the cache implementations so far only the inplementation for infinispan supports it. - </para> - <para> - Bloom-filter used to avoid read nodes that definitely do not have ACL. <emphasis role="bold">acl-bloomfilter-false-positive-probability</emphasis> and <emphasis role="bold">acl-bloomfilter-elements-number</emphasis> used to configure such filters. Bloom filters are not supported by all the cache implementations so far only the inplementation for infinispan supports it. - </para> - <para> - More about Bloom filters you can read here <ulink url="http://en.wikipedia.org/wiki/Bloom_filter">http://en.wi...;. - </para> - </note> - <para> - The eXo JCR has a JDBC-based, relational database, production ready <emphasis role="bold">Workspace Data Container</emphasis>. - </para> - <para> - Workspace Data Container <emphasis>may</emphasis> support external storages for <literal>javax.jcr.Value</literal> (which can be the case for BLOB values for example) using the optional element <literal>value-storages</literal>. - </para> - <para> - The Data Container will try to read or write a Value using the underlying value storage plug-in if the filter criteria (see below) match the current property. - </para> - <example> - <title>External Value Storage Configuration</title> - <programlisting language="XML" role="XML">&lt;value-storages&gt; - &lt;value-storage id=&quot;Storage #1&quot; class=&quot;org.exoplatform.services.jcr.impl.storage.value.fs.TreeFileValueStorage&quot;&gt; - &lt;properties&gt; - &lt;property name=&quot;path&quot; value=&quot;data/values&quot;/&gt; - &lt;/properties&gt; - &lt;filters&gt; - &lt;filter property-type=&quot;Binary&quot; min-value-size=&quot;1M&quot;/&gt;&lt;!-- Values large of 1Mbyte --&gt; - &lt;/filters&gt; -......... -&lt;/value-storages&gt;</programlisting> - <para> - <literal>value-storage</literal> is the subclass of <literal>org.exoplatform.services.jcr.storage.value.ValueStoragePlugin</literal> and <literal>properties</literal> are optional plug-in specific parameters. - </para> - <para> - <literal>filters</literal>: Each file value storage can have the filter(s) for incoming values. If there are several filter criteria, they all have to match (AND-Condition). - </para> - </example> - <para> - A filter can match values by property type (property-type), property name (property-name), ancestor path (ancestor-path) and/or the size of values stored (min-value-size, e.g. 1M, 4.2G, 100 (bytes)). - </para> - <para> - In a code sample, we use a filter with property-type and min-value-size only. That means that the storage is only for binary values whose size is greater than 1Mbyte. - </para> - <para> - It is recommended that you store properties with large values in a file value storage only. - </para> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-Cluster_Configuration"> - <title>Configuring Cluster</title> - <section id="sect-Reference_Guide-Cluster_Configuration-Launching_Cluster"> - <title>Launching Cluster</title> - <section id="sect-Reference_Guide-Launching_Cluster-Configuring_JCR_to_use_external_configuration"> - <title>Configuring JCR to use external configuration</title> - <itemizedlist> - <listitem> - <para> - To manually configure a repository, create a new configuration file (<filename>exo-jcr-configuration.xml</filename> for example). For details, see <xref linkend="chap-Reference_Guide-JCR_configuration"/>. - </para> - <para> - The configuration file must be formatted as follows: - </para> - <example> - <title>External Configuration</title> - <programlisting language="XML" role="XML">&lt;repository-service default-repository=&quot;repository1&quot;&gt; - &lt;repositories&gt; - &lt;repository name=&quot;repository1&quot; system-workspace=&quot;ws1&quot; default-workspace=&quot;ws1&quot;&gt; - &lt;security-domain&gt;exo-domain&lt;/security-domain&gt; - &lt;access-control&gt;optional&lt;/access-control&gt; - &lt;authentication-policy&gt;org.exoplatform.services.jcr.impl.core.access.JAASAuthenticator&lt;/authentication-policy&gt; - &lt;workspaces&gt; - &lt;workspace name=&quot;ws1&quot;&gt; - &lt;container class=&quot;org.exoplatform.services.jcr.impl.storage.jdbc.optimisation.CQJDBCWorkspaceDataContainer&quot;&gt; - &lt;properties&gt; - &lt;property name=&quot;source-name&quot; value=&quot;jdbcjcr&quot; /&gt; - &lt;property name=&quot;dialect&quot; value=&quot;oracle&quot; /&gt; - &lt;property name=&quot;multi-db&quot; value=&quot;false&quot; /&gt; - &lt;property name=&quot;update-storage&quot; value=&quot;false&quot; /&gt; - &lt;property name=&quot;max-buffer-size&quot; value=&quot;200k&quot; /&gt; - &lt;property name=&quot;swap-directory&quot; value=&quot;../temp/swap/production&quot; /&gt; - &lt;/properties&gt; - &lt;value-storages&gt; - <![CDATA[<!-- Comment #1 -->]]> - &lt;/value-storages&gt; - &lt;/container&gt; - &lt;initializer class=&quot;org.exoplatform.services.jcr.impl.core.ScratchWorkspaceInitializer&quot;&gt; - &lt;properties&gt; - &lt;property name=&quot;root-nodetype&quot; value=&quot;nt:unstructured&quot; /&gt; - &lt;/properties&gt; - &lt;/initializer&gt; - &lt;cache enabled=&quot;true&quot; class=&quot;org.exoplatform.services.jcr.impl.dataflow.persistent.jbosscache.JBossCacheWorkspaceStorageCache&quot;&gt; - <![CDATA[<!-- Comment #2 -->]]> - &lt;/cache&gt; - &lt;query-handler class=&quot;org.exoplatform.services.jcr.impl.core.query.lucene.SearchIndex&quot;&gt; - <![CDATA[<!-- Comment #3 -->]]> - &lt;/query-handler&gt; - &lt;lock-manager class=&quot;org.exoplatform.services.jcr.impl.core.lock.jbosscache.CacheableLockManagerImpl&quot;&gt; - <![CDATA[<!-- Comment #4 -->]]> - &lt;/lock-manager&gt; - &lt;/workspace&gt; - &lt;workspace name=&quot;ws2&quot;&gt; - ... - &lt;/workspace&gt; - &lt;workspace name=&quot;wsN&quot;&gt; - ... - &lt;/workspace&gt; - &lt;/workspaces&gt; - &lt;/repository&gt; - &lt;/repositories&gt; -&lt;/repository-service&gt;</programlisting> - <para> - Comment #1: Refer to <xref linkend="exam-Reference_Guide-Configuration_requirements-Value_Storage_configuration"/>. - </para> - <para> - Comment #2: Refer to <xref linkend="exam-Reference_Guide-Configuration_requirements-Cache_configuration"/>. - </para> - <para> - Comment #3: Refer to <xref linkend="exam-Reference_Guide-Configuration_requirements-Indexer_configuration"/>. - </para> - <para> - Comment #4: Refer to <xref linkend="exam-Reference_Guide-Configuration_requirements-Lock_Manager_configuration"/>. - </para> - </example> - </listitem> - <listitem> - <para> - Then, update <parameter>RepositoryServiceConfiguration</parameter> configuration in the <filename>exo-configuration.xml</filename> to reference your file: - </para> - <programlisting language="XML" role="XML">&lt;component&gt; - &lt;key&gt;org.exoplatform.services.jcr.config.RepositoryServiceConfiguration&lt;/key&gt; - &lt;type&gt;org.exoplatform.services.jcr.impl.config.RepositoryServiceConfigurationImpl&lt;/type&gt; - &lt;init-params&gt; - &lt;value-param&gt; - &lt;name&gt;conf-path&lt;/name&gt; - &lt;description&gt;JCR configuration file&lt;/description&gt; - &lt;value&gt;exo-jcr-configuration.xml&lt;/value&gt; - &lt;/value-param&gt; - &lt;/init-params&gt; -&lt;/component&gt;</programlisting> - </listitem> - </itemizedlist> - </section> - </section> - <section id="sect-Reference_Guide-Cluster_Configuration-Requirements"> - <title>Requirements</title> - <section id="sect-Reference_Guide-Requirements-Environment_requirements"> - <title>Environment requirements</title> - <itemizedlist> - <listitem> - <para> - Every node of the cluster <emphasis role="bold">must</emphasis> have the same mounted Network File System (<abbrev>NFS</abbrev>) with the read and write permissions on it. - </para> - </listitem> - <listitem> - <para> - Every node of cluster <emphasis role="bold">must</emphasis> use the same database. - </para> - </listitem> - <listitem> - <para> - The same Clusters on different nodes <emphasis role="bold">must</emphasis> have the same names. - </para> - <example id="exam-Reference_Guide-Environment_requirements-Example"> - <title>Example</title> - <para> - If the <emphasis>Indexer</emphasis> cluster in the <emphasis>production</emphasis> workspace on the first node is named <literal>production_indexer_cluster</literal>, then <emphasis>indexer</emphasis> clusters in the <emphasis>production</emphasis> workspace on all other nodes <emphasis role="bold">must</emphasis> also be named <literal>production_indexer_cluster</literal>. - </para> - </example> - </listitem> - </itemizedlist> - </section> - <section id="sect-Reference_Guide-Requirements-Configuration_requirements"> - <title>Configuration requirements</title> - <para> - The configuration of every workspace in the repository must contain the following elements: - </para> - <example id="exam-Reference_Guide-Configuration_requirements-Value_Storage_configuration"> - <title>Value Storage configuration</title> - <programlisting language="XML" role="XML">&lt;value-storages&gt; - &lt;value-storage id=&quot;system&quot; class=&quot;org.exoplatform.services.jcr.impl.storage.value.fs.TreeFileValueStorage&quot;&gt; - &lt;properties&gt; - &lt;property name=&quot;path&quot; value=&quot;/mnt/tornado/temp/values/production&quot; /&gt; &lt;!--path within NFS where ValueStorage will hold it&apos;s data--&gt; - &lt;/properties&gt; - &lt;filters&gt; - &lt;filter property-type=&quot;Binary&quot; /&gt; - &lt;/filters&gt; - &lt;/value-storage&gt; -&lt;/value-storages&gt;</programlisting> - </example> - <example id="exam-Reference_Guide-Configuration_requirements-Cache_configuration"> - <title>Cache configuration</title> - <programlisting language="XML" role="XML">&lt;cache enabled=&quot;true&quot; class=&quot;org.exoplatform.services.jcr.impl.dataflow.persistent.jbosscache.JBossCacheWorkspaceStorageCache&quot;&gt; - &lt;properties&gt; - &lt;property name=&quot;jbosscache-configuration&quot; value=&quot;jar:/conf/portal/test-jbosscache-data.xml&quot; /&gt; &lt;!-- path to JBoss Cache configuration for data storage --&gt; - &lt;property name=&quot;jgroups-configuration&quot; value=&quot;jar:/conf/portal/udp-mux.xml&quot; /&gt; &lt;!-- path to JGroups configuration --&gt; - &lt;property name=&quot;jbosscache-cluster-name&quot; value=&quot;JCR_Cluster_cache_production&quot; /&gt; &lt;!-- JBoss Cache data storage cluster name --&gt; - &lt;property name=&quot;jgroups-multiplexer-stack&quot; value=&quot;true&quot; /&gt; - &lt;/properties&gt; -&lt;/cache&gt;</programlisting> - </example> - <example id="exam-Reference_Guide-Configuration_requirements-Indexer_configuration"> - <title>Indexer configuration</title> - <programlisting language="XML" role="XML">&lt;query-handler class=&quot;org.exoplatform.services.jcr.impl.core.query.lucene.SearchIndex&quot;&gt; - &lt;properties&gt; - &lt;property name=&quot;changesfilter-class&quot; value=&quot;org.exoplatform.services.jcr.impl.core.query.jbosscache.JBossCacheIndexChangesFilter&quot; /&gt; - &lt;property name=&quot;index-dir&quot; value=&quot;/mnt/tornado/temp/jcrlucenedb/production&quot; /&gt; &lt;!-- path within NFS where ValueStorage will hold it&apos;s data --&gt; - &lt;property name=&quot;jbosscache-configuration&quot; value=&quot;jar:/conf/portal/test-jbosscache-indexer.xml&quot; /&gt; &lt;!-- path to JBoss Cache configuration for indexer --&gt; - &lt;property name=&quot;jgroups-configuration&quot; value=&quot;jar:/conf/portal/udp-mux.xml&quot; /&gt; &lt;!-- path to JGroups configuration --&gt; - &lt;property name=&quot;jbosscache-cluster-name&quot; value=&quot;JCR_Cluster_indexer_production&quot; /&gt; &lt;!-- JBoss Cache indexer cluster name --&gt; - &lt;property name=&quot;jgroups-multiplexer-stack&quot; value=&quot;true&quot; /&gt; - &lt;/properties&gt; -&lt;/query-handler&gt;</programlisting> - </example> - <example id="exam-Reference_Guide-Configuration_requirements-Lock_Manager_configuration"> - <title>Lock Manager configuration</title> - <programlisting language="XML" role="XML">&lt;lock-manager class=&quot;org.exoplatform.services.jcr.impl.core.lock.jbosscache.CacheableLockManagerImpl&quot;&gt; - &lt;properties&gt; - &lt;property name=&quot;time-out&quot; value=&quot;15m&quot; /&gt; - &lt;property name=&quot;jbosscache-configuration&quot; value=&quot;jar:/conf/portal/test-jbosscache-lock.xml&quot; /&gt; &lt;!-- path to JBoss Cache configuration for lock manager --&gt; - &lt;property name=&quot;jgroups-configuration&quot; value=&quot;jar:/conf/portal/udp-mux.xml&quot; /&gt; &lt;!-- path to JGroups configuration --&gt; - &lt;property name=&quot;jgroups-multiplexer-stack&quot; value=&quot;true&quot; /&gt; - &lt;property name=&quot;jbosscache-cluster-name&quot; value=&quot;JCR_Cluster_lock_production&quot; /&gt; &lt;!-- JBoss Cache locks cluster name --&gt; - - &lt;property name=&quot;jbosscache-cl-cache.jdbc.table.name&quot; value=&quot;jcrlocks_production&quot;/&gt; &lt;!-- the name of the DB table where lock&apos;s data will be stored --&gt; - &lt;property name=&quot;jbosscache-cl-cache.jdbc.table.create&quot; value=&quot;true&quot;/&gt; - &lt;property name=&quot;jbosscache-cl-cache.jdbc.table.drop&quot; value=&quot;false&quot;/&gt; - &lt;property name=&quot;jbosscache-cl-cache.jdbc.table.primarykey&quot; value=&quot;jcrlocks_production_pk&quot;/&gt; - &lt;property name=&quot;jbosscache-cl-cache.jdbc.fqn.column&quot; value=&quot;fqn&quot;/&gt; - &lt;property name=&quot;jbosscache-cl-cache.jdbc.node.column&quot; value=&quot;node&quot;/&gt; - &lt;property name=&quot;jbosscache-cl-cache.jdbc.parent.column&quot; value=&quot;parent&quot;/&gt; - &lt;property name=&quot;jbosscache-cl-cache.jdbc.datasource&quot; value=&quot;jdbcjcr&quot;/&gt; - &lt;/properties&gt; -&lt;/lock-manager&gt;</programlisting> - </example> - </section> - </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-JBoss_Cache_configuration"> - <title>Configuring JBoss Cache</title> - <section id="sect-Reference_Guide-JBoss_Cache_configuration-Indexer_lock_manager_and_data_container_configuration"> - <title>Indexer, lock manager and data container configuration</title> - <para> - Each mentioned component uses instances of the JBoss Cache product for caching in clustered environment. So every element has its own transport and has to be configured correctly. As usual, workspaces have similar configuration differing only in cluster-names (and, possibly, some other parameters). The simplest way to configure them is to define their own configuration files for each component in each workspace: - </para> - <programlisting language="XML" role="XML">&lt;property name=&quot;jbosscache-configuration&quot; value=&quot;conf/standalone - /test-jbosscache-lock-db1-ws1.xml&quot; /&gt;</programlisting> - <para> - But if there are few workspaces, configuring them in such a way can be painful and hard-manageable. eXo JCR offers a template-based configuration for JBoss Cache instances. You can have one template for Lock Manager, one for Indexer and one for data container and use them in all the workspaces, defining the map of substitution parameters in a main configuration file. Just simply define ${jbosscache-&lt;parameter name&gt;} inside xml-template and list correct value in JCR configuration file just below &quot;jbosscache-configuration&quot;, as shown: - </para> - <para> - Template: - </para> - <programlisting language="XML" role="XML">... -&lt;clustering mode=&quot;replication&quot; clusterName=&quot;${jbosscache-cluster-name}&quot;&gt; - &lt;stateRetrieval timeout=&quot;20000&quot; fetchInMemoryState=&quot;false&quot; /&gt; -...</programlisting> - <para> - and JCR configuration file: - </para> - <programlisting language="XML" role="XML">... -&lt;property name=&quot;jbosscache-configuration&quot; value=&quot;jar:/conf/portal/jbosscache-lock.xml&quot; /&gt; -&lt;property name=&quot;jbosscache-cluster-name&quot; value=&quot;JCR-cluster-locks-db1-ws&quot; /&gt; -...</programlisting> - </section> - <section id="sect-Reference_Guide-JBoss_Cache_configuration-JGroups_configuration"> - <title>JGroups configuration</title> - <para> - JGroups is used by JBoss Cache for network communications and transport in a clustered environment. If the property is defined in component configuration, it will be injected into the JBoss Cache instance on start up. - </para> - <programlisting language="XML" role="XML">&lt;property name=&quot;jgroups-configuration&quot; value=&quot;your/path/to/modified-udp.xml&quot; /&gt;</programlisting> - <para> - As outlined above, each component (lock manager, data container and query handler) for each workspace requires its own clustered environment. In other words, they have their own clusters with unique names. - </para> - <para> - Each cluster should, by default, perform multi-casts on a separate port. This configuration leads to much unnecessary overhead on cluster. This is why JGroups offers a multiplexer feature, providing ability to use one single channel for set of clusters. - </para> - <para> - The multiplexer reduces network overheads and increase performance and stability of application. To enable multiplexer stack, you should define appropriate configuration file (<filename>upd-mux.xml</filename> is pre-shipped one with eXo JCR) and set &quot;jgroups-multiplexer-stack&quot; into &quot;true&quot;. - </para> - <programlisting language="XML" role="XML">&lt;property name=&quot;jgroups-configuration&quot; value=&quot;jar:/conf/portal/udp-mux.xml&quot; /&gt; -&lt;property name=&quot;jgroups-multiplexer-stack&quot; value=&quot;true&quot; /&gt;</programlisting> - </section> - <section id="sect-Reference_Guide-JBoss_Cache_configuration-Sharing_JBoss_Cache_instances"> - <title>Sharing JBoss Cache instances</title> - <para> - As a single JBoss Cache instance can be demanding on resources, and the default setup will have an instance each for the indexer, the lock manager and the data container on each workspace, an environment that uses multiple workspace may benefit from sharing a JBoss Cache instance between several instances of the same type (the lock manager instance, for example). - </para> - <para> - This feature is disabled by default and can be enabled at the component configuration level by setting the <parameter>jbosscache-shareable</parameter> property to <literal>true</literal>: - </para> - <programlisting language="XML" role="XML">&lt;property name=&quot;jbosscache-shareable&quot; value=&quot;true&quot; /&gt;</programlisting> - <para> - Once enabled, this feature will allow the JBoss Cache instance used by a component to be re-used by another components of the same type with the same JBoss Cache configuration (with the exception of the eviction configuration, which can differ). - </para> - <para> - This means that all the parameters of type <parameter>jbosscache-<replaceable>&lt;PARAM_NAME&gt;</replaceable></parameter> must be identical between the components of same type of different workspaces. - </para> - <para> - Therefore, if you can use the same values for the parameters in each workspace, you only need three JBoss Cache instances (one instance each for the indexer, lock manager and data container) running at once. This can relieve resource stress significantly. - </para> - </section> - <section id="sect-Reference_Guide-JBoss_Cache_configuration-Shipped_JBoss_Cache_configuration_templates"> - <title>Shipped JBoss Cache configuration templates</title> - <para> - The eXo JCR implementation is shipped with ready-to-use JBoss Cache configuration templates for JCR&apos;s components. They are located in <filename><replaceable>JPP_HOME</replaceable>/gatein/gatein.ear/portal.war/WEB-INF/conf/jcr/jbosscache</filename> directory, inside either the <filename>cluster</filename> or <filename>local</filename> directory. - </para> - <section id="sect-Reference_Guide-Shipped_JBoss_Cache_configuration_templates-Data_container_template"> - <title>Data container template</title> - <para> - The data container template is <filename>config.xml</filename>: - </para> - <programlisting language="XML" role="XML">&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?&gt; -&lt;jbosscache xmlns:xsi=&quot;http://www.w3.org/2001/XMLSchema-instance&quot; xmlns=&quot;urn:jboss:jbosscache-core:config:3.1&quot;&gt; - - &lt;locking useLockStriping=&quot;false&quot; concurrencyLevel=&quot;50000&quot; lockParentForChildInsertRemove=&quot;false&quot; - lockAcquisitionTimeout=&quot;20000&quot; /&gt; - - &lt;clustering mode=&quot;replication&quot; clusterName=&quot;${jbosscache-cluster-name}&quot;&gt; - &lt;stateRetrieval timeout=&quot;20000&quot; fetchInMemoryState=&quot;false&quot; /&gt; - &lt;jgroupsConfig multiplexerStack=&quot;jcr.stack&quot; /&gt; - &lt;sync /&gt; - &lt;/clustering&gt; - - &lt;!-- Eviction configuration --&gt; - &lt;eviction wakeUpInterval=&quot;5000&quot;&gt; - &lt;default algorithmClass=&quot;org.jboss.cache.eviction.LRUAlgorithm&quot; - actionPolicyClass=&quot;org.exoplatform.services.jcr.impl.dataflow.persistent.jbosscache.ParentNodeEvictionActionPolicy&quot; - eventQueueSize=&quot;1000000&quot;&gt; - &lt;property name=&quot;maxNodes&quot; value=&quot;1000000&quot; /&gt; - &lt;property name=&quot;timeToLive&quot; value=&quot;120000&quot; /&gt; - &lt;/default&gt; - &lt;/eviction&gt; -&lt;/jbosscache&gt;</programlisting> - </section> - <section id="sect-Reference_Guide-Shipped_JBoss_Cache_configuration_templates-Lock_manager_template"> - <title>Lock manager template</title> - <para> - The lock manager template is <filename>lock-config.xml</filename>: - </para> - <programlisting language="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../extras/Advanced_Development_JCR_lock-manager-config/lock-config.xml_code"/></programlisting> - </section> - <section id="sect-Reference_Guide-Shipped_JBoss_Cache_configuration_templates-Query_handler_indexer_template"> - <title>Query handler (indexer) template</title> - <para> - The query handler template is called <filename>indexer-config.xml</filename>: - </para> - <programlisting language="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../extras/Advanced_Development_JCR_cluster-config/indexer-config.xml_code"/></programlisting> - </section> - </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-LockManager"> - <title>LockManager</title> - <para> - The LockManager stores lock objects. It can lock or release objects as required. It is also responsible for removing stale locks. - </para> - <para> - The LockManager in JBoss Portal Platform is implemented with <classname>org.exoplatform.services.jcr.impl.core.lock.jbosscache.CacheableLockManagerImpl</classname>. - </para> - <para> - It is enabled by adding <literal>lock-manager-configuration</literal> to <literal>workspace-configuration</literal>. - </para> - <para> - For example: - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../extras/default47.xml" parse="text"/></programlisting> - <section id="sect-Reference_Guide-LockManager-CacheableLockManagerImpl"> - <title>CacheableLockManagerImpl</title> - <para> - <classname>CacheableLockManagerImpl</classname> stores lock objects in JBoss-cache (which implements JDBCCacheLoader to store locks in a database). This means its locks are replicable and can affect an entire cluster rather than just a single node. - </para> - <para> - The length of time LockManager allows a lock to remain in place can be configured with the &quot;<literal>time-out</literal>&quot; property. - </para> - <para> - The LockRemover thread periodically polls LockManager for locks that have passed the time-out limit and must be removed. - </para> - <para> - The time-out for LockRemover is set as follows (the default value is 30m): - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../extras/Advanced_Development_JCR_lock-manager-config/default48.xml" parse="text"/></programlisting> -<!-- Doesn't seem necessary -<formalpara> -<title>Configuration</title> -<para> -Replication requirements are same as for Cache -</para> -</formalpara> -<para> -Full JCR configuration example can be seen in <xref linkend="sect-Reference_Guide-Clustering_with_JBoss_Application_Server_REMOVABLE"/>. -</para> -<title>Configuration Tips:</title> -<listitem> -<para> -The <parameter>clusterName</parameter> ("jbosscache-cluster-name") must be unique; -</para> -</listitem> -<listitem> -<para> -The <parameter>cache.jdbc.table.name</parameter> must be unique per datasource; -</para> -</listitem> -<listitem> -<para> -The <parameter>cache.jdbc.fqn.type</parameter> and <parameter>cache.jdbc.node.type</parameter> parameters must be configured according to the database being used. -</para> -</listitem> -</itemizedlist> --> <para> - There are a number of ways to configure <classname>CacheableLockManagerImpl</classname>. Each involves configuring JBoss Cache and JDBCCacheLoader. - </para> - <itemizedlist> - <listitem> - <para> - <xref linkend="sect-Reference_Guide-CacheableLockManagerImpl-Simple_JBoss_Cache_Configuration"/> - </para> - </listitem> - <listitem> - <para> - <xref linkend="sect-Reference_Guide-CacheableLockManagerImpl-Template_JBoss_Cache_Configuration"/> - </para> - </listitem> - </itemizedlist> - <para> - Refer to <ulink url="http://community.jboss.org/wiki/JBossCacheJDBCCacheLoader"... for more information about JBoss Cache and JDBCCacheLoader. - </para> - <section id="sect-Reference_Guide-CacheableLockManagerImpl-Simple_JBoss_Cache_Configuration"> - <title>Simple JBoss Cache Configuration</title> - <para> - One method to configure the LockManager is to put a JBoss Cache configuration file path into <classname>CacheableLockManagerImpl</classname>. - </para> - <note> - <para> - This is not the most efficient method for configuring the LockManager as it requires a JBoss Cache configuration file for each LockManager configuration in each workspace of each repository. The configuration set up can subsequently become quite difficult to manage. - </para> - <para> - This method is useful, however, if a single, specially configured LockManager is required. - </para> - </note> - <para> - The required configuration is shown in the example below: - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../extras/Advanced_Development_JCR_lock-manager-config/default49.xml" parse="text"/></programlisting> - <para> - Sample content of the <replaceable>jbosscache-lock-config.xml</replaceable> file specified in the <replaceable>jbosscache-configuration</replaceable> property is shown in the code example below. - </para> - <example> - <title>Sample Content of the jbosscache-lock-config.xml File</title> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../extras/Advanced_Development_JCR_lock-manager-config/default50.xml" parse="text"/></programlisting> - <para> - Comment #1: The cluster name at <parameter>clustering mode=&quot;replication&quot; clusterName=&quot;JBoss-Cache-Lock-Cluster_Name&quot;</parameter> must be unique; - </para> - <para> - Comment #2: The <parameter>cache.jdbc.table.name</parameter> must be unique per datasource. - </para> - <para> - Comment #3: The <parameter>cache.jdbc.node.type</parameter> and <parameter>cache.jdbc.fqn.type</parameter> parameters must be configured according to the database in use. Refer to the table below for information about data types. - </para> - </example> - <table id="tabl-Reference_Guide-Simple_JBoss_Cache_Configuration-Data_Types_in_Different_Databases"> - <title>Data Types in Different Databases</title> - <tgroup cols="3"> - <thead> - <row> - <entry> DataBase name </entry> - <entry> Node data type </entry> - <entry> FQN data type </entry> - </row> - </thead> - <tbody> - <row> - <entry> default </entry> - <entry> BLOB </entry> - <entry> VARCHAR(512) </entry> - </row> - <row> - <entry> HSSQL </entry> - <entry> OBJECT </entry> - <entry> VARCHAR(512) </entry> - </row> - <row> - <entry> MySQL </entry> - <entry> LONGBLOB </entry> - <entry> VARCHAR(512) </entry> - </row> - <row> - <entry> ORACLE </entry> - <entry> BLOB </entry> - <entry> VARCHAR2(512) </entry> - </row> - <row> - <entry> PostgreSQL </entry> - <entry> bytea </entry> - <entry> VARCHAR(512) </entry> - </row> - <row> - <entry> MSSQL </entry> - <entry> VARBINARY(MAX) </entry> - <entry> VARCHAR(512) </entry> - </row> - <row> - <entry> DB2 </entry> - <entry> BLOB </entry> - <entry> VARCHAR(512) </entry> - </row> - <row> - <entry> Sybase </entry> - <entry> IMAGE </entry> - <entry> VARCHAR(512) </entry> - </row> - </tbody> - </tgroup> - </table> - </section> - <section id="sect-Reference_Guide-CacheableLockManagerImpl-Template_JBoss_Cache_Configuration"> - <title>Template JBoss Cache Configuration</title> - <para> - Another method to configure LockManager is to use a JBoss Cache configuration template for all LockManagers. - </para> - <para> - Below is an example <filename>test-jbosscache-lock.xml</filename> template file: - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../extras/Advanced_Development_JCR_lock-manager-config/you.xml" parse="text"/></programlisting> - <para> - The parameters that will populate the above file are shown below: - </para> - <example> - <title>JBoss Cache Configuration Parameters</title> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../extras/Advanced_Development_JCR_lock-manager-config/default51.xml" parse="text"/></programlisting> - <para> - Comment #1: The <literal>jgroups-configuration</literal> has been moved to a separate configuration file (<filename>udp-mux.xml</filename>, shown below). In this case the <filename>udp-mux.xml</filename> is a common configuration for all JGroup components (QueryHandler, cache, LockManager), but this is not a requirement of the configuration method. - </para> - <para> - Comment #2: The <parameter>jbosscache-cl-cache.jdbc.fqn.column</parameter> and <parameter>jbosscache-cl-cache.jdbc.node.type</parameter> parameters are not explicitly defined as <parameter>cache.jdbc.fqn.type</parameter> and <parameter>cache.jdbc.node.type</parameter> are defined in the JBoss Cache configuration. - </para> - </example> - <para> - Refer to <xref linkend="tabl-Reference_Guide-Simple_JBoss_Cache_Configuration-Data_Types_in_Different_Databases"/> for information about setting these parameters or set them as <parameter>AUTO</parameter> and the data type will by detected automatically. - </para> - <para> - <filename>udp-mux.xml</filename>: - </para> - <programlisting language="XML" role="XML"><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="../../../extras/Advanced_Development_JCR_lock-manager-config/default52.xml" parse="text"/></programlisting> - </section> - <section id="sect-Reference_Guide-CacheableLockManagerImpl-Lock_migration_from_1.12.x"> - <title>Lock Migration</title> - <para> - There are three options available: - </para> - <variablelist id="vari-Reference_Guide-Lock_migration_from_1.12.x-Lock_Migration_Options"> - <title>Lock Migration Options</title> - <varlistentry> - <term>When new Shareable Cache feature is not going to be used and all locks should be kept after migration.</term> - <listitem> - <procedure> - <title/> - <step> - <para> - Ensure that the same lock tables are used in configuration - </para> - </step> - <step> - <para> - Start the server - </para> - </step> - </procedure> - </listitem> - </varlistentry> - <varlistentry> - <term>When new Shareable Cache feature is not going to be used and all locks should be removed after migration.</term> - <listitem> - <procedure> - <title/> - <step> - <para> - Ensure that the same lock tables used in configuration - </para> - </step> - <step> - <para> - Start the sever WITH system property: - </para> - <programlisting>-Dorg.exoplatform.jcr.locks.force.remove=true -</programlisting> - </step> - <step> - <para> - Stop the server - </para> - </step> - <step> - <para> - Start the server WITHOUT system property: - </para> - <programlisting>-Dorg.exoplatform.jcr.locks.force.remove -</programlisting> - </step> - </procedure> - </listitem> - </varlistentry> - <varlistentry> - <term>When new Shareable Cache feature will be used (in this case all locks are removed after migration).</term> - <listitem> - <procedure> - <title/> - <step> - <para> - Start the sever WITH system property: - </para> - <programlisting>-Dorg.exoplatform.jcr.locks.force.remove=true -</programlisting> - </step> - <step> - <para> - Stop the server. - </para> - </step> - <step> - <para> - Start the server WITHOUT system property: - </para> - <programlisting>-Dorg.exoplatform.jcr.locks.force.remove -</programlisting> - </step> - <step> - <title>Optional:</title> - <para> - Manually remove old tables for lock. - </para> - </step> - </procedure> - </listitem> - </varlistentry> - </variablelist> - </section> - </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-QueryHandler_configuration"> - <title>Configuring QueryHandler</title> - <section id="sect-Reference_Guide-QueryHandler_configuration-Indexing_in_clustered_environment"> - <title>Indexing in clustered environment</title> - <para> - JCR offers indexing strategies for clustered environments using the advantages of running in a single JVM or doing the best to use all resources available in cluster. JCR uses Lucene library as underlying search and indexing engine, but it has several limitations that greatly reduce possibilities and limits the usage of cluster advantages. That&apos;s why eXo JCR offers two strategies that are suitable for it&apos;s own usecases. They are clustered with shared index and clustered with local indexes. Each one has it&apos;s pros and cons. - </para> - <para> - Clustered implementation with local indexes combines in-memory buffer index directory with delayed file-system flushing. This index is called &quot;Volatile&quot; and it is invoked in searches also. Within some conditions volatile index is flushed to the persistent storage (file system) as new index directory. This allows to achieve great results for write operations. - </para> - <figure> - <title id="diagramlocalindez">Local Index Diagram</title> - <mediaobject> - <imageobject> - <imagedata width="444" align="center" fileref="images/eXoJCR/diagram-local-index.png"/> - </imageobject> - </mediaobject> - </figure> - <para> - As this implementation designed for clustered environment it has additional mechanisms for data delivery within cluster. Actual text extraction jobs done on the same node that does content operations (i.e. write operation). Prepared &quot;documents&quot; (Lucene term that means block of data ready for indexing) are replicated withing cluster nodes and processed by local indexes. So each cluster instance has the same index content. When new node joins the cluster it has no initial index, so it must be created. There are some supported ways of doing this operation. The simplest is to simply copy the index manually but this is not intended for use. If no initial index found JCR uses automated scenarios. They are controlled via configuration (see &quot;index-recovery-mode&quot; parameter) offering full re-indexing from database or copying from another cluster node. - </para> - <para> - For some reasons having a multiple index copies on each instance can be costly. So shared index can be used instead (see diagram below). - </para> - <figure> - <title id="diagramsharedindex">Shared Index Diagram</title> - <mediaobject> - <imageobject> - <imagedata width="444" align="center" fileref="images/eXoJCR/diagram-shared-index.png"/> - </imageobject> - </mediaobject> - </figure> - <para> - This indexing strategy combines advantages of in-memory index along with shared persistent index offering &quot;near&quot; real time search capabilities. This means that newly added content is accessible via search practically immediately. This strategy allows nodes to index data in their own volatile (in-memory) indexes, but persistent indexes are managed by single &quot;coordinator&quot; node only. Each cluster instance has a read access for shared index to perform queries combining search results found in own in-memory index also. Take in account that shared folder must be configured in your system environment (i.e. mounted NFS folder). But this strategy in some extremely rare cases can have a bit different volatile indexes within cluster instances for a while. In a few seconds they will be up2date. - </para> - <para> - See more about <xref linkend="chap-Reference_Guide-Search_Configuration"/> . - </para> - </section> - <section id="sect-Reference_Guide-QueryHandler_configuration-Configuration"> - <title>Configuration</title> - <section id="sect-Reference_Guide-Configuration-Query_handler_configuration_overview"> - <title>Query-handler configuration overview</title> - <para> - Configuration example: - </para> - <programlisting language="XML" role="XML">&lt;workspace name=&quot;ws&quot;&gt; - &lt;query-handler class=&quot;org.exoplatform.services.jcr.impl.core.query.lucene.SearchIndex&quot;&gt; - &lt;properties&gt; - &lt;property name=&quot;index-dir&quot; value=&quot;shareddir/index/db1/ws&quot; /&gt; - &lt;property name=&quot;changesfilter-class&quot; - value=&quot;org.exoplatform.services.jcr.impl.core.query.jbosscache.JBossCacheIndexChangesFilter&quot; /&gt; - &lt;property name=&quot;jbosscache-configuration&quot; value=&quot;jbosscache-indexer.xml&quot; /&gt; - &lt;property name=&quot;jgroups-configuration&quot; value=&quot;udp-mux.xml&quot; /&gt; - &lt;property name=&quot;jgroups-multiplexer-stack&quot; value=&quot;true&quot; /&gt; - &lt;property name=&quot;jbosscache-cluster-name&quot; value=&quot;JCR-cluster-indexer-ws&quot; /&gt; - &lt;property name=&quot;max-volatile-time&quot; value=&quot;60&quot; /&gt; - &lt;property name=&quot;rdbms-reindexing&quot; value=&quot;true&quot; /&gt; - &lt;property name=&quot;reindexing-page-size&quot; value=&quot;1000&quot; /&gt; - &lt;property name=&quot;index-recovery-mode&quot; value=&quot;from-coordinator&quot; /&gt; - &lt;property name=&quot;index-recovery-filter&quot; value=&quot;org.exoplatform.services.jcr.impl.core.query.lucene.DocNumberRecoveryFilter&quot; /&gt; - &lt;/properties&gt; - &lt;/query-handler&gt; -&lt;/workspace&gt; -</programlisting> - <table id="tabl-Reference_Guide-Query_handler_configuration_overview-Configuration_properties"> - <title>Configuration properties</title> - <tgroup cols="2"> - <thead> - <row> - <entry> Property name </entry> - <entry> Description </entry> - </row> - </thead> - <tbody> - <row> - <entry> index-dir </entry> - <entry> path to index </entry> - </row> - <row> - <entry> changesfilter-class </entry> - <entry> template of JBoss-cache configuration for all query-handlers in repository </entry> - </row> - <row> - <entry> jbosscache-configuration </entry> - <entry> template of JBoss-cache configuration for all query-handlers in repository </entry> - </row> - <row> - <entry> jgroups-configuration </entry> - <entry> jgroups-configuration is template configuration for all components (search, cache, locks) [Add link to document describing template configurations] </entry> - </row> - <row> - <entry> jgroups-multiplexer-stack </entry> - <entry> [TODO about jgroups-multiplexer-stack - add link to JBoss doc] </entry> - </row> - <row> - <entry> jbosscache-cluster-name </entry> - <entry> cluster name (must be unique) </entry> - </row> - <row> - <entry> max-volatile-time </entry> - <entry> max time to live for Volatile Index </entry> - </row> - <row> - <entry> rdbms-reindexing </entry> - <entry> indicate that need to use rdbms reindexing mechanism if possible, the default value is true </entry> - </row> - <row> - <entry> reindexing-page-size </entry> - <entry> maximum amount of nodes which can be retrieved from storage for re-indexing purpose, the default value is 100 </entry> - </row> - <row> - <entry> index-recovery-mode </entry> - <entry> If the parameter has been set to <command>from-indexing</command>, so a full indexing will be automatically launched (default behavior), if the parameter has been set to <command>from-coordinator</command>, the index will be retrieved from coordinator </entry> - </row> - <row> - <entry> index-recovery-filter </entry> - <entry> Defines implementation class or classes of RecoveryFilters, the mechanism of index synchronization for Local Index strategy. </entry> - </row> - <row> - <entry> async-reindexing </entry> - <entry> Controls the process of re-indexing on JCR&apos;s startup. If this flag is set, indexing will be launched asynchronously, without blocking the JCR. Default is &quot;<literal>false</literal>&quot;. </entry> - </row> - </tbody> - </tgroup> - </table> - <formalpara id="form-Reference_Guide-Query_handler_configuration_overview-Improving_Query_Performance_With_postgreSQL_and_rdbms_reindexing"> - <title>Improving Query Performance With <literal>postgreSQL</literal> and <parameter>rdbms-reindexing</parameter></title> - <para> - If you use <literal>postgreSQL</literal> and <parameter>rdbms-reindexing</parameter> is set to <literal>true</literal>, the performance of the queries used while indexing can be improved by: - </para> - </formalpara> - <procedure> - <title/> - <step> - <para> - Set the parameter &quot;<parameter>enable_seqscan</parameter>&quot; to &quot;<literal>off</literal>&quot; - </para> - <para> - <emphasis role="bold">OR</emphasis> - </para> - <para> - Set &quot;<parameter>default_statistics_target</parameter>&quot; to at least &quot;<literal>50</literal>&quot;. - </para> - </step> - <step> - <para> - Restart DB server and make analyze of the JCR_SVALUE (or JCR_MVALUE) table. - </para> - </step> - </procedure> - <formalpara id="form-Reference_Guide-Query_handler_configuration_overview-Improving_Query_Performance_With_DB2_and_rdbms_reindexing"> - <title>Improving Query Performance With <literal>DB2</literal> and <parameter>rdbms-reindexing</parameter></title> - <para> - If you use <literal>DB2</literal> and <parameter>rdbms-reindexing</parameter> is set to <literal>true</literal>, the performance of the queries used while indexing can be improved by: - </para> - </formalpara> - <procedure> - <title/> - <step> - <para> - Make statistics on tables by running the following for <literal>JCR_SITEM</literal> (or <literal>JCR_MITEM</literal>) and <literal>JCR_SVALUE</literal> (or <literal>JCR_MVALUE</literal>) tables: - </para> - <programlisting><code>RUNSTATS ON TABLE &lt;scheme&gt;.&lt;table&gt; WITH DISTRIBUTION AND INDEXES ALL</code></programlisting> - </step> - </procedure> - </section> - <section id="sect-Reference_Guide-Configuration-Cluster_ready_indexing"> - <title>Cluster-ready indexing</title> - <para> - For both cluster-ready implementations JBoss Cache, JGroups and Changes Filter values must be defined. Shared index requires some kind of remote or shared file system to be attached in a system (i.e. NFS, SMB or etc). Indexing directory (&quot;indexDir&quot; value) must point to it. Setting &quot;changesfilter-class&quot; to &quot;org.exoplatform.services.jcr.impl.core.query.jbosscache.JBossCacheIndexChangesFilter&quot; will enable shared index implementation. - </para> - <programlisting language="XML" role="XML">&lt;workspace name=&quot;ws&quot;&gt; - &lt;query-handler class=&quot;org.exoplatform.services.jcr.impl.core.query.lucene.SearchIndex&quot;&gt; - &lt;properties&gt; - &lt;property name=&quot;index-dir&quot; value=&quot;/mnt/nfs_drive/index/db1/ws&quot; /&gt; - &lt;property name=&quot;changesfilter-class&quot; - value=&quot;org.exoplatform.services.jcr.impl.core.query.jbosscache.JBossCacheIndexChangesFilter&quot; /&gt; - &lt;property name=&quot;jbosscache-configuration&quot; value=&quot;jbosscache-indexer.xml&quot; /&gt; - &lt;property name=&quot;jgroups-configuration&quot; value=&quot;udp-mux.xml&quot; /&gt; - &lt;property name=&quot;jgroups-multiplexer-stack&quot; value=&quot;true&quot; /&gt; - &lt;property name=&quot;jbosscache-cluster-name&quot; value=&quot;JCR-cluster-indexer-ws&quot; /&gt; - &lt;property name=&quot;max-volatile-time&quot; value=&quot;60&quot; /&gt; - &lt;property name=&quot;rdbms-reindexing&quot; value=&quot;true&quot; /&gt; - &lt;property name=&quot;reindexing-page-size&quot; value=&quot;1000&quot; /&gt; - &lt;property name=&quot;index-recovery-mode&quot; value=&quot;from-coordinator&quot; /&gt; - &lt;/properties&gt; - &lt;/query-handler&gt; -&lt;/workspace&gt;</programlisting> - <para> - In order to use cluster-ready strategy based on local indexes, when each node has own copy of index on local file system, the following configuration must be applied. Indexing directory must point to any folder on local file system and &quot;changesfilter-class&quot; must be set to &quot;org.exoplatform.services.jcr.impl.core.query.jbosscache.LocalIndexChangesFilter&quot;. - </para> - <programlisting language="XML" role="XML">&lt;workspace name=&quot;ws&quot;&gt; - &lt;query-handler class=&quot;org.exoplatform.services.jcr.impl.core.query.lucene.SearchIndex&quot;&gt; - &lt;properties&gt; - &lt;property name=&quot;index-dir&quot; value=&quot;/mnt/nfs_drive/index/db1/ws&quot; /&gt; - &lt;property name=&quot;changesfilter-class&quot; - value=&quot;org.exoplatform.services.jcr.impl.core.query.jbosscache.LocalIndexChangesFilter&quot; /&gt; - &lt;property name=&quot;jbosscache-configuration&quot; value=&quot;jbosscache-indexer.xml&quot; /&gt; - &lt;property name=&quot;jgroups-configuration&quot; value=&quot;udp-mux.xml&quot; /&gt; - &lt;property name=&quot;jgroups-multiplexer-stack&quot; value=&quot;true&quot; /&gt; - &lt;property name=&quot;jbosscache-cluster-name&quot; value=&quot;JCR-cluster-indexer-ws&quot; /&gt; - &lt;property name=&quot;max-volatile-time&quot; value=&quot;60&quot; /&gt; - &lt;property name=&quot;rdbms-reindexing&quot; value=&quot;true&quot; /&gt; - &lt;property name=&quot;reindexing-page-size&quot; value=&quot;1000&quot; /&gt; - &lt;property name=&quot;index-recovery-mode&quot; value=&quot;from-coordinator&quot; /&gt; - &lt;/properties&gt; - &lt;/query-handler&gt; -&lt;/workspace&gt; -</programlisting> - </section> - <section id="sect-Reference_Guide-Configuration-Local_Index_Recovery_Filters"> - <title>Local Index Recovery Filters</title> - <para> - A common usecase for all cluster-ready applications is a hot joining and leaving of processing units. All nodes that are joining a cluster for the first time or nodes joining after some downtime, must be in a synchronized state. - </para> - <para> - When using shared value storages, databases and indexes, cluster nodes are synchronized at any given time. But is not the case when a local index strategy is used. - </para> - <para> - If a new node joins a cluster, without an index it is retrieved or recreated. Nodes can be also be restarted and thus the index is not empty. By default, even though the existing index is thought to be up to date, it can be outdated. - </para> - <para> - The JBoss Portal Platform JCR offers a mechanism called <literal>RecoveryFilters</literal> that will automatically retrieve index for the joining node on start up. This feature is a set of filters that can be defined via <literal>QueryHandler</literal> configuration: - </para> - <programlisting language="XML">&lt;property name=&quot;index-recovery-filter&quot; value=&quot;org.exoplatform.services.jcr.impl.core.query.lucene.DocNumberRecoveryFilter&quot; /&gt;</programlisting> - <para> - Filter numbers are not limited so they can be combined: - </para> - <programlisting language="XML">&lt;property name=&quot;index-recovery-filter&quot; value=&quot;org.exoplatform.services.jcr.impl.core.query.lucene.DocNumberRecoveryFilter&quot; /&gt; - &lt;property name=&quot;index-recovery-filter&quot; value=&quot;org.exoplatform.services.jcr.impl.core.query.lucene.SystemPropertyRecoveryFilter&quot; /&gt; -</programlisting> - <para> - If any one returns fires, the index is re-synchronized. This feature uses standard index recovery mode defined by previously described parameter (can be &quot;from-indexing&quot; (default) or &quot;from-coordinator&quot;) - </para> - <programlisting language="XML">&lt;property name=&quot;index-recovery-mode&quot; value=&quot;from-coordinator&quot; /&gt; -</programlisting> - <para> - There are multiple filter implementations: - </para> - <variablelist id="vari-Reference_Guide-Local_Index_Recovery_Filters-org.exoplatform.services.jcr.impl.core.query.lucene.DummyRecoveryFilter"> - <title>org.exoplatform.services.jcr.impl.core.query.lucene.DummyRecoveryFilter</title> - <varlistentry> - <term/> - <listitem> - <para> - Always returns true, for cases when index must be force resynchronized (recovered) each time. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>org.exoplatform.services.jcr.impl.core.query.lucene.SystemPropertyRecoveryFilter</term> - <listitem> - <para> - Returns value of system property &quot;<literal>org.exoplatform.jcr.recoveryfilter.forcereindexing</literal>&quot;. So index recovery can be controlled from the top without changing documentation using system properties. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>org.exoplatform.services.jcr.impl.core.query.lucene.ConfigurationPropertyRecoveryFilter</term> - <listitem> - <para> - Returns value of <literal>QueryHandler</literal> configuration property &quot;<literal>index-recovery-filter-forcereindexing</literal>&quot;. So index recovery can be controlled from configuration separately for each workspace. For example: - </para> - <programlisting language="XML">&lt;property name=&quot;index-recovery-filter&quot; value=&quot;org.exoplatform.services.jcr.impl.core.query.lucene.ConfigurationPropertyRecoveryFilter&quot; /&gt; - &lt;property name=&quot;index-recovery-filter-forcereindexing&quot; value=&quot;true&quot; /&gt; -</programlisting> - </listitem> - </varlistentry> - <varlistentry> - <term>org.exoplatform.services.jcr.impl.core.query.lucene.DocNumberRecoveryFilter</term> - <listitem> - <para> - Checks the number of documents in index on coordinator side and self-side. It returns <literal>true</literal> if the count differs. - </para> - <para> - The advantage of this filter compared to others, is that it will skip reindexing for workspaces where the index was not modified. - </para> - <para> - For example; if there is ten repositories with three workspaces in each and only one is heavily used in the cluster, this filter will only reindex those workspaces that have been changed, without affecting other indexes. - </para> - <para> - This greatly reduces start up time. - </para> - </listitem> - </varlistentry> - </variablelist> - </section> - <section id="sect-Reference_Guide-Configuration-JBoss_Cache_template_configuration"> - <title>JBoss-Cache template configuration</title> - <para> - JBoss-Cache template configuration for query handler is about the same for both clustered strategies. - </para> - <example id="exam-Reference_Guide-JBoss_Cache_template_configuration-jbosscache_indexer.xml"> - <title>jbosscache-indexer.xml</title> - <programlisting language="XML" role="XML">&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?&gt; -&lt;jbosscache xmlns:xsi=&quot;http://www.w3.org/2001/XMLSchema-instance&quot; xmlns=&quot;urn:jboss:jbosscache-core:config:3.1&quot;&gt; - &lt;locking useLockStriping=&quot;false&quot; concurrencyLevel=&quot;50000&quot; lockParentForChildInsertRemove=&quot;false&quot; - lockAcquisitionTimeout=&quot;20000&quot; /&gt; - &lt;!-- Configure the TransactionManager --&gt; - &lt;transaction transactionManagerLookupClass=&quot;org.jboss.cache.transaction.JBossStandalone - JTAManagerLookup&quot; /&gt; - &lt;clustering mode=&quot;replication&quot; clusterName=&quot;${jbosscache-cluster-name}&quot;&gt; - &lt;stateRetrieval timeout=&quot;20000&quot; fetchInMemoryState=&quot;false&quot; /&gt; - &lt;jgroupsConfig multiplexerStack=&quot;jcr.stack&quot; /&gt; - &lt;sync /&gt; - &lt;/clustering&gt; - &lt;!-- Eviction configuration --&gt; - &lt;eviction wakeUpInterval=&quot;5000&quot;&gt; - &lt;default algorithmClass=&quot;org.jboss.cache.eviction.FIFOAlgorithm&quot; eventQueueSize=&quot;1000000&quot;&gt; - &lt;property name=&quot;maxNodes&quot; value=&quot;10000&quot; /&gt; - &lt;property name=&quot;minTimeToLive&quot; value=&quot;60000&quot; /&gt; - &lt;/default&gt; - &lt;/eviction&gt; -&lt;/jbosscache&gt;</programlisting> - </example> - <para> - Read more about template configurations <xref linkend="chap-Reference_Guide-JBoss_Cache_configuration"/>. - </para> - </section> - </section> - <section id="sect-Reference_Guide-QueryHandler_configuration-Asynchronous_Reindexing"> - <title>Asynchronous Re-indexing</title> - <para> - Managing a large data set using a JCR in a production environment at times requires special operations with Indexes, stored on File System. One of those maintenance operations is a recreation of it. Also called &quot;re-indexing&quot;. There are various usecases when it&apos;s important to do. They include hardware faults, hard restarts, data-corruption, migrations and JCR updates that brings new features related to index. Usually index re-creation requested on server&apos;s startup or in runtime. - </para> - <section id="sect-Reference_Guide-Asynchronous_Reindexing-On_startup_indexing"> - <title>On startup indexing</title> - <para> - A common usecase for updating and re-creating the index is to stop the server and manually remove indexes for workspaces requiring it. When the server is re-started, the missing indexes are automatically recovered by re-indexing. - </para> - <para> - The eXo JCR Supports direct RDBMS re-indexing, which can be faster than ordinary and can be configured via <literal>QueryHandler</literal> parameter <parameter>rdbms-reindexing</parameter> set to <literal>true</literal>. - </para> - <para> - A new feature is asynchronous indexing on startup. Usually startup is blocked until the indexing process is finished. This block can take any period of time, depending on amount of data persisted in repositories. But this can be resolved by using an asynchronous approaches of startup indexation. - </para> - <para> - Essentially, all indexing operations are performed in the background without blocking the repository. This is controlled by the value of the <parameter>async-reindexing</parameter> parameter in <literal>QueryHandler</literal> configuration. - </para> - <para> - With asynchronous indexation active, the JCR starts with no active indexes present. Queries on JCR still can be executed without exceptions, but no results will be returned until index creation completed. - </para> - <para> - The index state check is accomplished via <literal>QueryManagerImpl</literal>: - </para> - <para> - -<programlisting lang="java">boolean online = ((QueryManagerImpl)Workspace.getQueryManager()).getQueryHandeler().isOnline();</programlisting> - - </para> - <para> - The <emphasis role="bold">OFFLINE</emphasis> state means that the index is currently re-creating. When the state is changed, a corresponding log event is printed. When the background index task starts the index is switched to <emphasis role="bold">OFFLINE</emphasis>, with following log event : - </para> - <programlisting>[INFO] Setting index OFFLINE (repository/production[system]).</programlisting> - <para> - When the indexing process is finished, the following two events are logged : - </para> - <programlisting>[INFO] Created initial index for 143018 nodes (repository/production[system]). -[INFO] Setting index ONLINE (repository/production[system]).</programlisting> - <para> - Those two log lines indicates the end of process for workspace given in brackets. Calling isOnline() as mentioned above, will also return true. - </para> - </section> - <section id="sect-Reference_Guide-Asynchronous_Reindexing-Hot_Asynchronous_Workspace_Reindexing_via_JMX"> - <title>Hot Asynchronous Workspace Re-indexing using JMX</title> - <para> - Some hard system faults, errors during upgrades, migration issues and some other factors may corrupt the index. Current versions of JCR supports <emphasis role="bold">Hot Asynchronous Workspace Reindexing</emphasis> feature. It allows Service Administrators to launch the process in background without stopping or blocking the whole application by using any JMX-compatible console. - </para> - <figure> - <title id="jmx-jconsole">JMX Jconsole</title> - <mediaobject> - <imageobject> - <imagedata align="center" fileref="images/eXoJCR/jmx-jconsole.png"/> - </imageobject> - </mediaobject> - </figure> - <para> - The server can continue working as expected while the index is recreated. - </para> - <para> - This depends on the flag <parameter>allow queries</parameter> being passed via JMX interface to the reindex operation invocation. If the flag is set, the application continues working. - </para> - <para> - However, there is one critical limitation users must be aware of; <emphasis>the index is frozen while the background task is running</emphasis>. - </para> - <para> - This means that queries are performed on a version of the index present at the moment the indexing task is started, and that data written into the repository after startup will not be available through the search until process completes. - </para> - <para> - Data added during re-indexation is also indexed, but will be available only when reindexing is complete. The JCR makes a snapshot of indexes at the invocation of the asynchronous indexing task and uses that snapshot for searches. - </para> - <para> - When the operation is finished, the stale index is replaced by the newly created index, which included any newly added data. - </para> - <para> - If the <parameter>allow queries</parameter> flag is set to <literal>false</literal>, then all queries will throw an exception while task is running. The current state can be acquired using the following JMX operation: - </para> - <itemizedlist> - <listitem> - <para> - getHotReindexingState() - returns information about latest invocation: start time, if in progress or finish time if done. - </para> - </listitem> - </itemizedlist> - </section> - <section id="sect-Reference_Guide-Asynchronous_Reindexing-Notices"> - <title>Notices</title> - <para> - Hot re-indexing via JMX cannot be launched if the index is already in offline mode. This means that the index is currently involved in some other operations, such as re-indexing at startup, copying in cluster to another node or whatever. - </para> - <para> - Also; <emphasis>Hot Asynchronous Reindexing via JMX</emphasis> and <literal>on startup</literal> reindexing are different features. So you can&apos;t get the state of startup reindexing using command <code>getHotReindexingState</code> in JMX interface, but there are some common JMX operations: - </para> - <itemizedlist> - <listitem> - <para> - getIOMode - returns current index IO mode (READ_ONLY / READ_WRITE), belongs to clustered configuration states; - </para> - </listitem> - <listitem> - <para> - getState - returns current state: ONLINE / OFFLINE. - </para> - </listitem> - </itemizedlist> - </section> - </section> - <section id="sect-Reference_Guide-QueryHandler_configuration-Advanced_tuning"> - <title>Advanced tuning</title> - <section id="sect-Reference_Guide-Advanced_tuning-Lucene_tuning"> - <title>Lucene tuning</title> - <para> - As mentioned, JCR Indexing is based on the Lucene indexing library as the underlying search engine. It uses Directories to store index and manages access to index by Lock Factories. - </para> - <para> - By default, the JCR implementation uses optimal combination of Directory implementation and Lock Factory implementation. - </para> - <para> - The <literal>SimpleFSDirectory</literal> is used in Windows environments and the <literal>NIOFSDirectory</literal> implementation is used in non-Windows systems. - </para> - <para> - <literal>NativeFSLockFactory</literal> is an optimal solution for a wide variety of cases including clustered environment with NFS shared resources. - </para> - <para> - But those defaults can be overridden in the system properties. - </para> - <para> - Two properties: <literal>org.exoplatform.jcr.lucene.store.FSDirectoryLockFactoryClass</literal> and <literal>org.exoplatform.jcr.lucene.FSDirectory.class</literal> control (and change) the default behavior. - </para> - <para> - The first defines the implementation of abstract Lucene <literal>LockFactory</literal> class and the second sets implementation class for <literal>FSDirectory</literal> instances. - </para> - <para> - For more information, refer to the Lucene documentation. But be careful, for while the JCR allows users to change implementation classes of Lucene internals, it does not guarantee the stability and functionality of those changes. - </para> - </section> - </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-JBossTransactionsService"> - <title>JBossTransactionsService</title> - <section id="sect-Reference_Guide-JBossTransactionsService-Introduction"> - <title>Introduction</title> - <para> - JBossTransactionsService implements eXo TransactionService and provides access to <ulink url="http://www.jboss.org/jbosstm/">JBoss Transaction Service (JBossTS)</ulink> JTA implementation via eXo container dependency. - </para> - <para> - TransactionService used in JCR cache <emphasis>org.exoplatform.services.jcr.impl.dataflow.persistent.jbosscache.JBossCacheWorkspaceStorageCache</emphasis> implementation. - </para> - </section> - <section id="sect-Reference_Guide-JBossTransactionsService-Configuration"> - <title>Configuration</title> - <para> - Example configuration: - </para> - <programlisting language="XML" role="XML"> &lt;component&gt; - &lt;key&gt;org.exoplatform.services.transaction.TransactionService&lt;/key&gt; - &lt;type&gt;org.exoplatform.services.transaction.jbosscache.JBossTransactionsService&lt;/type&gt; - &lt;init-params&gt; - &lt;value-param&gt; - &lt;name&gt;timeout&lt;/name&gt; - &lt;value&gt;3000&lt;/value&gt; - &lt;/value-param&gt; - &lt;/init-params&gt; - &lt;/component&gt;</programlisting> - <para> - timeout - XA transaction timeout in seconds - </para> - </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-JCR_Query_Usecases"> - <title>JCR Query Use-cases</title> - <section id="sect-Reference_Guide-JCR_Query_Usecases-Introduction"> - <title>Introduction</title> - <para> - The JCR supports two query languages; JCR and XPath. A query, whether XPath or SQL, specifies a subset of nodes within a workspace, called the result set. The result set constitutes all the nodes in the workspace that meet the constraints stated in the query. - </para> - </section> - <section id="sect-Reference_Guide-JCR_Query_Usecases-Query_Lifecycle"> - <title>Query Lifecycle</title> - <section id="sect-Reference_Guide-Query_Lifecycle-Query_Creation_and_Execution"> - <title>Query Creation and Execution</title> - <example id="exam-Reference_Guide-Query_Lifecycle-Query_Creation_and_Execution-SQL"> - <title>SQL</title> - <programlisting language="Java" role="Java">// get QueryManager -QueryManager queryManager = workspace.getQueryManager();&#160; -// make SQL query -Query query = queryManager.createQuery(&quot;SELECT * FROM nt:base &quot;, Query.SQL); -// execute query -QueryResult result = query.execute();</programlisting> - </example> - <example id="exam-Reference_Guide-Query_Lifecycle-Query_Creation_and_Execution-XPath"> - <title>XPath</title> - <programlisting language="Java" role="Java">// get QueryManager -QueryManager queryManager = workspace.getQueryManager(); -// make XPath query -Query query = queryManager.createQuery(&quot;//element(*,nt:base)&quot;, Query.XPATH); -// execute query -QueryResult result = query.execute();</programlisting> - </example> - </section> - <section id="sect-Reference_Guide-Query_Lifecycle-Query_Result_Processing"> - <title>Query Result Processing</title> - <programlisting language="Java" role="Java">// fetch query result -QueryResult result = query.execute();</programlisting> - <para> - To fetch the nodes: - </para> - <programlisting language="Java" role="Java">NodeIterator it = result.getNodes();</programlisting> - <para> - The results can be formatted in a table: - </para> - <programlisting language="Java" role="Java">// get column names -String[] columnNames = result.getColumnNames(); -// get column rows -RowIterator rowIterator = result.getRows(); -while(rowIterator.hasNext()){ - // get next row - Row row = rowIterator.nextRow(); - // get all values of row - Value[] values = row.getValues(); -}</programlisting> - </section> - <section id="sect-Reference_Guide-Query_Lifecycle-Scoring"> - <title>Scoring</title> - <para> - The result returns a score for each row in the result set. The score contains a value that indicates a rating of how well the result node matches the query. A high value means a better matching than a low value. This score can be used for ordering the result. - </para> - <para> - eXo JCR Scoring is a mapping of Lucene scoring. For a more in-depth understanding, please study <ulink url="http://lucene.apache.org/java/2_4_1/scoring.html">Lucene documentation</ulink>. - </para> - <para> - The <literal>jcr:score</literal> is calculated as; <literal>(lucene score)*1000f</literal>. - </para> -<!--<para> - Score may be increased for specified nodes, see <xref linkend="sect-Reference_Guide-Changing_Priority_of_Node" /> - </para> - <para> - Also, see an example in sect-Reference_Guide-Ordering_by_Score /> - </para>--> </section> - </section> - <section id="sect-Reference_Guide-JCR_Query_Usecases-Tips_and_tricks"> - <title>Tips and tricks</title> - <section xmlns="" id="sect-Reference_Guide-XPath_queries_containing_node_names_starting_with_a_number"> - <title>XPath queries containing node names starting with a number</title> - <para> - If you execute an XPath request like this... - </para> - <programlisting language="Java" role="Java">// get QueryManager -QueryManager queryManager = workspace.getQueryManager(); -// make XPath query -Query query = queryManager.createQuery(&quot;/jcr:root/Documents/Publie/2010//element(*, exo:article)&quot;, Query.XPATH);</programlisting> - <para> - ...you will receive an <code>Invalid request</code> error. This is because XML (and thus XPath) does not allow names starting with a number. - </para> - <para> - Therefore, XPath requests using a node name that starts with a number are invalid. - </para> - <para> - Some possible alternatives are: - </para> - <itemizedlist> - <listitem> - <para> - Use an SQL request. - </para> - </listitem> - <listitem> - <para> - Use escaping: - </para> - <programlisting language="Java" role="Java">// get QueryManager -QueryManager queryManager = workspace.getQueryManager(); -// make XPath query -Query query = queryManager.createQuery(&quot;/jcr:root/Documents/Publie/_x0032_010//element(*, exo:article)&quot;, Query.XPATH);</programlisting> - </listitem> - </itemizedlist> - </section> - </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-Searching_Repository_Content"> - <title>Searching Repository Content</title> - <section id="sect-Reference_Guide-Searching_Repository_Content-Introduction"> - <title>Introduction</title> - <para> - You can find the JCR configuration file here: <filename><replaceable>JPP_DIST</replaceable>/gatein/gatein.ear/portal.war/portal/WEB-INF/conf/jcr/repository-configuration.xml</filename>. - </para> - <para> - Please refer to <xref linkend="chap-Reference_Guide-Search_Configuration"/> for more information about index configuration. - </para> - </section> - <section id="sect-Reference_Guide-Searching_Repository_Content-Bi_directional_RangeIterator"> - <title>Bi-directional RangeIterator</title> - <para> - <literal>QueryResult.getNodes()</literal> will return bi-directional <literal>NodeIterator</literal> implementation. - </para> - <note> - <para> - Bi-directional NodeIterator is <emphasis role="bold">not supported</emphasis> in two cases: - </para> - <orderedlist> - <listitem> - <para> - SQL query: select * from nt:base - </para> - </listitem> - <listitem> - <para> - XPath query: //* . - </para> - </listitem> - </orderedlist> - </note> - <para> - <literal>TwoWayRangeIterator</literal> interface: - </para> - <programlisting language="Java" role="Java">/** - * Skip a number of elements in the iterator. - * - * @param skipNum the non-negative number of elements to skip - * @throws java.util.NoSuchElementException if skipped past the first element - * in the iterator. - */ -public void skipBack(long skipNum);</programlisting> - <para> - Usage: - </para> - <programlisting language="Java" role="Java">NodeIterator iter = queryResult.getNodes(); -while (iter.hasNext()) { - if (skipForward) { - iter.skip(10); // Skip 10 nodes in forward direction - } else if (skipBack) { - TwoWayRangeIterator backIter = (TwoWayRangeIterator) iter; - backIter.skipBack(10); // Skip 10 nodes back - } - ....... -}</programlisting> - </section> - <section id="sect-Reference_Guide-Searching_Repository_Content-Fuzzy_Searches"> - <title>Fuzzy Searches</title> - <para> - The JBoss Portal Platform JCR supports features such as Lucene Fuzzy Searches. To perform a fuzzy search, form your query like the one below: - </para> - <programlisting language="Java" role="Java">QueryManager qman = session.getWorkspace().getQueryManager(); -Query q = qman.createQuery(&quot;select * from nt:base where contains(field, &apos;ccccc~&apos;)&quot;, Query.SQL); -QueryResult res = q.execute();</programlisting> - </section> - <section id="sect-Reference_Guide-Searching_Repository_Content-SynonymSearch"> - <title>SynonymSearch</title> - <para> - Searching with synonyms is integrated in the <literal>jcr:contains()</literal> function and uses the same syntax as synonym searches in web search engines (Google, for example). If a search term is prefixed by a tilde symbol ( ~ ), synonyms of the search term are taken into consideration. For example: - </para> - <programlisting>SQL: select * from nt:resource where contains(., &apos;~parameter&apos;) - -XPath: //element(*, nt:resource)[jcr:contains(., &apos;~parameter&apos;)</programlisting> - <para> - This feature is disabled by default and you need to add a configuration parameter to the query-handler element in your JCR configuration file to enable it. - </para> - <programlisting language="XML" role="XML">&lt;param name=&quot;synonymprovider-config-path&quot; value=&quot;..you path to configuration file.....&quot;/&gt; -&lt;param name=&quot;synonymprovider-class&quot; value=&quot;org.exoplatform.services.jcr.impl.core.query.lucene.PropertiesSynonymProvider&quot;/&gt;</programlisting> - <programlisting language="XML" role="XML">/** - * &lt;code&gt;SynonymProvider&lt;/code&gt; defines an interface for a component that - * returns synonyms for a given term. - */ -public interface SynonymProvider { - - /** - * Initializes the synonym provider and passes the file system resource to - * the synonym provider configuration defined by the configuration value of - * the &lt;code&gt;synonymProviderConfigPath&lt;/code&gt; parameter. The resource may be - * &lt;code&gt;null&lt;/code&gt; if the configuration parameter is not set. - * - * @param fsr the file system resource to the synonym provider - * configuration. - * @throws IOException if an error occurs while initializing the synonym - * provider. - */ - public void initialize(InputStream fsr) throws IOException; - - /** - * Returns an array of terms that are considered synonyms for the given - * &lt;code&gt;term&lt;/code&gt;. - * - * @param term a search term. - * @return an array of synonyms for the given &lt;code&gt;term&lt;/code&gt; or an empty - * array if no synonyms are known. - */ - public String[] getSynonyms(String term); -}</programlisting> - </section> - <section id="sect-Reference_Guide-Searching_Repository_Content-Highlighting"> - <title>Highlighting</title> - <para> - An <literal>ExcerptProvider</literal> retrieves text excerpts for a node in the query result and marks up the words in the text that match the query terms. - </para> - <para> - By default, match highlighting is disabled because as it requires that additional information is written to the search index. - </para> - <para> - To enable this feature, you need to add a configuration parameter to the <parameter>query-handler</parameter> element in your JCR configuration file: - </para> - <programlisting language="XML" role="XML">&lt;param name=&quot;support-highlighting&quot; value=&quot;true&quot;/&gt;</programlisting> - <para> - Additionally, there is a parameter that controls the format of the excerpt created. In JCR 1.9, the default is set to <literal>org.exoplatform.services.jcr.impl.core.query.lucene.DefaultHTMLExcerpt</literal>. The configuration parameter for this setting is: - </para> - <programlisting language="XML" role="XML">&lt;param name=&quot;excerptprovider-class&quot; value=&quot;org.exoplatform.services.jcr.impl.core.query.lucene.DefaultXMLExcerpt&quot;/&gt;</programlisting> - <section id="sect-Reference_Guide-Highlighting-DefaultXMLExcerpt"> - <title>DefaultXMLExcerpt</title> - <para> - This excerpt provider creates an XML fragment of the following form: - </para> - <programlisting language="XML" role="XML">&lt;excerpt&gt; - &lt;fragment&gt; - &lt;highlight&gt;exoplatform&lt;/highlight&gt; implements both the mandatory - XPath and optional SQL &lt;highlight&gt;query&lt;/highlight&gt; syntax. - &lt;/fragment&gt; - &lt;fragment&gt; - Before parsing the XPath &lt;highlight&gt;query&lt;/highlight&gt; in - &lt;highlight&gt;exoplatform&lt;/highlight&gt;, the statement is surrounded - &lt;/fragment&gt; -&lt;/excerpt&gt;</programlisting> - </section> - <section id="sect-Reference_Guide-Highlighting-DefaultHTMLExcerpt"> - <title>DefaultHTMLExcerpt</title> - <para> - This excerpt provider creates an HTML fragment of the following form: - </para> - <programlisting language="HTML" role="HTML">&lt;div&gt; - &lt;span&gt; - &lt;strong&gt;exoplatform&lt;/strong&gt; implements both the mandatory XPath - and optional SQL &lt;strong&gt;query&lt;/strong&gt; syntax. - &lt;/span&gt; - &lt;span&gt; - Before parsing the XPath &lt;strong&gt;query&lt;/strong&gt; in - &lt;strong&gt;exoplatform&lt;/strong&gt;, the statement is surrounded - &lt;/span&gt; -&lt;/div&gt;</programlisting> - </section> - <section id="sect-Reference_Guide-Highlighting-Usage"> - <title>Usage</title> - <para> - If you are using XPath, you must use the <code>rep:excerpt()</code> function in the last location step, just like you would select properties: - </para> - <programlisting language="Java" role="Java">QueryManager qm = session.getWorkspace().getQueryManager(); -Query q = qm.createQuery(&quot;//*[jcr:contains(., &apos;exoplatform&apos;)]/(@Title|rep:excerpt(.))&quot;, Query.XPATH); -QueryResult result = q.execute(); -for (RowIterator it = result.getRows(); it.hasNext(); ) { - Row r = it.nextRow(); - Value title = r.getValue(&quot;Title&quot;); - Value excerpt = r.getValue(&quot;rep:excerpt(.)&quot;); -}</programlisting> - <para> - The above code searches for nodes that contain the word <emphasis>exoplatform</emphasis> and then gets the value of the <parameter>Title</parameter> property and an excerpt for each resultant node. - </para> - <para> - It is also possible to use a relative path in the call <code>Row.getValue()</code> while the query statement still remains the same. Also, you may use a relative path to a string property. The returned value will then be an excerpt based on string value of the property. - </para> - <para> - Both available excerpt providers will create fragments of about 150 characters and up to three fragments. - </para> - <para> - In SQL, the function is called <code>excerpt()</code> without the rep prefix, but the column in the <literal>RowIterator</literal> will nonetheless be labelled <code>rep:excerpt(.)</code>. - </para> - <programlisting language="Java" role="Java">QueryManager qm = session.getWorkspace().getQueryManager(); -Query q = qm.createQuery(&quot;select excerpt(.) from nt:resource where contains(., &apos;exoplatform&apos;)&quot;, Query.SQL); -QueryResult result = q.execute(); -for (RowIterator it = result.getRows(); it.hasNext(); ) { - Row r = it.nextRow(); - Value excerpt = r.getValue(&quot;rep:excerpt(.)&quot;); -}</programlisting> - </section> - </section> - <section id="sect-Reference_Guide-Searching_Repository_Content-SpellChecker"> - <title>SpellChecker</title> - <para> - The lucene based query handler implementation supports a pluggable spell-checker mechanism. By default, spell checking is not available, it must be configured first. - </para> - <para> - Information about the <parameter>spellCheckerClass</parameter> parameter is available in <xref linkend="chap-Reference_Guide-Search_Configuration"/>. - </para> - <para> - The JCR currently provides an implementation class which uses the <ulink url="http://wiki.apache.org/jakarta-lucene/SpellChecker">luc...;. - </para> - <para> - The dictionary is derived from the fulltext, indexed content of the workspace and updated periodically. You can configure the refresh interval by picking one of the available inner classes of <literal>org.exoplatform.services.jcr.impl.core.query.lucene.spell.LuceneSpellChecker</literal>: - </para> - <itemizedlist> - <listitem> - <para> - <literal>OneMinuteRefreshInterval</literal> - </para> - </listitem> - <listitem> - <para> - <literal>FiveMinutesRefreshInterval</literal> - </para> - </listitem> - <listitem> - <para> - <literal>ThirtyMinutesRefreshInterval</literal> - </para> - </listitem> - <listitem> - <para> - <literal>OneHourRefreshInterval</literal> - </para> - </listitem> - <listitem> - <para> - <literal>SixHoursRefreshInterval</literal> - </para> - </listitem> - <listitem> - <para> - <literal>TwelveHoursRefreshInterval</literal> - </para> - </listitem> - <listitem> - <para> - <literal>OneDayRefreshInterval</literal> - </para> - </listitem> - </itemizedlist> - <para> - For example, if you want a refresh interval of six hours, the class name would be; <literal>org.exoplatform.services.jcr.impl.core.query.lucene.spell.LuceneSpellChecker$SixHoursRefreshInterval</literal>. - </para> - <para> - If you use <literal>org.exoplatform.services.jcr.impl.core.query.lucene.spell.LuceneSpellChecker</literal>, the refresh interval will be one hour. - </para> - <para> - The spell checker dictionary is stored as a lucene index under <filename>&lt;index-dir&gt;/spellchecker</filename>. If this index does not exist, a background thread will create it on start up. Similarly, the dictionary refresh is also done in a background thread so as not to block regular queries. - </para> - <section id="sect-Reference_Guide-SpellChecker-Usage"> - <title>Usage</title> - <para> - You can spell check a fulltext statement either with an XPath or a SQL query: - </para> - <programlisting language="Java" role="Java">// rep:spellcheck(&apos;explatform&apos;) will always evaluate to true -Query query = qm.createQuery(&quot;/jcr:root[rep:spellcheck(&apos;explatform&apos;)]/(rep:spellcheck())&quot;, Query.XPATH); -RowIterator rows = query.execute().getRows(); -// the above query will always return the root node no matter what string we check -Row r = rows.nextRow(); -// get the result of the spell checking -Value v = r.getValue(&quot;rep:spellcheck()&quot;); -if (v == null) { - // no suggestion returned, the spelling is correct or the spell checker - // does not know how to correct it. -} else { - String suggestion = v.getString(); -}</programlisting> - <para> - And the same using SQL: - </para> - <programlisting language="Java" role="Java">// SPELLCHECK(&apos;exoplatform&apos;) will always evaluate to true -Query query = qm.createQuery(&quot;SELECT rep:spellcheck() FROM nt:base WHERE jcr:path = &apos;/&apos; AND SPELLCHECK(&apos;explatform&apos;)&quot;, Query.SQL); -RowIterator rows = query.execute().getRows(); -// the above query will always return the root node no matter what string we check -Row r = rows.nextRow(); -// get the result of the spell checking -Value v = r.getValue(&quot;rep:spellcheck()&quot;); -if (v == null) { - // no suggestion returned, the spelling is correct or the spell checker - // does not know how to correct it. -} else { - String suggestion = v.getString(); -}</programlisting> - </section> - </section> - <section id="sect-Reference_Guide-Searching_Repository_Content-Similarity"> - <title>Similarity</title> - <para> - Starting with version, 1.12 JCR allows you to search for nodes that are similar to an existing node. - </para> - <para> - Similarity is determined by looking up terms that are common to nodes. There are some conditions that must be met for a term to be considered. This is required to limit the number possibly relevant terms. - </para> - <para> - To be considered, terms must: - </para> - <itemizedlist> - <listitem> - <para> - Be at least four characters long. - </para> - </listitem> - <listitem> - <para> - Occur at least twice in the source node. - </para> - </listitem> - <listitem> - <para> - Occur in at least five other nodes. - </para> - </listitem> - </itemizedlist> - <note> - <title>Note</title> - <para> - The similarity function requires that the support Hightlighting is enabled. Please make sure that you have the following parameter set for the query handler in your <filename>workspace.xml</filename>. - </para> - <programlisting language="XML" role="XML">&lt;param name=&quot;support-highlighting&quot; value=&quot;true&quot;/&gt;</programlisting> - </note> - <para> - The functions (<code>rep:similar()</code> in XPath and <code>similar()</code> in SQL) have two arguments: - </para> - <variablelist> - <title/> - <varlistentry> - <term>relativePath</term> - <listitem> - <para> - A relative path to a descendant node or a period (<literal>.</literal>) for the current node. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>absoluteStringPath</term> - <listitem> - <para> - A string literal that contains the path to the node for which to find similar nodes. - </para> - </listitem> - </varlistentry> - </variablelist> - <warning> - <title>Warning</title> - <para> - Relative path is not supported yet. - </para> - </warning> - <example id="exam-Reference_Guide-Similarity-Example"> - <title>Example</title> - <programlisting>//element(*, nt:resource)[rep:similar(., &apos;/parentnode/node.txt/jcr:content&apos;)]</programlisting> - <para> - Finds <literal>nt:resource</literal> nodes, which are similar to node by path <filename>/parentnode/node.txt/jcr:content</filename>. - </para> - </example> - </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-Fulltext_Search_And_Affecting_Settings"> - <title>Full Text Search And Affecting Settings</title> - <formalpara id="form-Reference_Guide-Fulltext_Search_And_Affecting_Settings-Property_content_indexing"> - <title>Property content indexing</title> - <para> - Each property of a node (if it is indexable) is processed with the Lucene analyzer and stored in the Lucene index. This is called indexing of a property. It allows fulltext searching of these indexed properties. - </para> - </formalpara> - <section id="sect-Reference_Guide-Fulltext_Search_And_Affecting_Settings-Lucene_Analyzers"> - <title>Lucene Analyzers</title> - <para> - The purpose of analyzers is to transform all strings stored in the index into a well-defined condition. The same analyzer(s) is/are used when searching in order to adapt the query string to the index reality. - </para> - <para> - Therefore, performing the same query using different analyzers can return different results. - </para> - <para> - The example below illustrates how the same string is transformed by different analyzers. - </para> - <table id="tabl-Reference_Guide-Lucene_Analyzers-The_quick_brown_fox_jumped_over_the_lazy_dogs"> - <title>&quot;The quick brown fox jumped over the lazy dogs&quot;</title> - <tgroup cols="2"> - <thead> - <row> - <entry> Analyzer </entry> - <entry> Parsed </entry> - </row> - </thead> - <tbody> - <row> - <entry> org.apache.lucene.analysis.WhitespaceAnalyzer </entry> - <entry> [The] [quick] [brown] [fox] [jumped] [over] [the] [lazy] [dogs] </entry> - </row> - <row> - <entry> org.apache.lucene.analysis.SimpleAnalyzer </entry> - <entry> [the] [quick] [brown] [fox] [jumped] [over] [the] [lazy] [dogs] </entry> - </row> - <row> - <entry> org.apache.lucene.analysis.StopAnalyzer </entry> - <entry> [quick] [brown] [fox] [jumped] [over] [lazy] [dogs] </entry> - </row> - <row> - <entry> org.apache.lucene.analysis.standard.StandardAnalyzer </entry> - <entry> [quick] [brown] [fox] [jumped] [over] [lazy] [dogs] </entry> - </row> - <row> - <entry> org.apache.lucene.analysis.snowball.SnowballAnalyzer </entry> - <entry> [quick] [brown] [fox] [jump] [over] [lazi] [dog] </entry> - </row> - <row> - <entry> org.apache.lucene.analysis.standard.StandardAnalyzer (configured without stop word - jcr default analyzer) </entry> - <entry> [the] [quick] [brown] [fox] [jumped] [over] [the] [lazy] [dogs] </entry> - </row> - </tbody> - </tgroup> - </table> - <table id="tabl-Reference_Guide-Lucene_Analyzers-XYampZ_Corporation_xyzexample.com"> - <title>&quot;XY&amp;Z Corporation - xyz(a)example.com&amp;quot;&lt;/title&gt; - <tgroup cols="2"> - <thead> - <row> - <entry> Analyzer </entry> - <entry> Parsed </entry> - </row> - </thead> - <tbody> - <row> - <entry> org.apache.lucene.analysis.WhitespaceAnalyzer </entry> - <entry> [XY&amp;Z] [Corporation] [-] [xyz(a)example.com] </entry> - </row> - <row> - <entry> org.apache.lucene.analysis.SimpleAnalyzer </entry> - <entry> [xy] [z] [corporation] [xyz] [example] [com] </entry> - </row> - <row> - <entry> org.apache.lucene.analysis.StopAnalyzer </entry> - <entry> [xy] [z] [corporation] [xyz] [example] [com] </entry> - </row> - <row> - <entry> org.apache.lucene.analysis.standard.StandardAnalyzer </entry> - <entry> [xy&amp;z] [corporation] [xyz@example] [com] </entry> - </row> - <row> - <entry> org.apache.lucene.analysis.snowball.SnowballAnalyzer </entry> - <entry> [xy&amp;z] [corpor] [xyz@exampl] [com] </entry> - </row> - <row> - <entry> org.apache.lucene.analysis.standard.StandardAnalyzer (configured without stop word - jcr default analyzer) </entry> - <entry> [xy&amp;z] [corporation] [xyz@example] [com] </entry> - </row> - </tbody> - </tgroup> - </table> - <note> - <para> - <literal>StandardAnalyzer</literal> is the default analyzer in the JBoss Portal Platform JCR search engine. But it does not use stop words. - </para> - </note> - <para> - You can assign your analyzer as described in <xref linkend="chap-Reference_Guide-Search_Configuration"/>. - </para> - </section> - <section id="sect-Reference_Guide-Fulltext_Search_And_Affecting_Settings-Property_Indexing"> - <title>Property Indexing</title> - <para> - Different properties are indexed in different ways and this affects whether it can be searched via fulltext by property or not. - </para> - <para> - Only two property types are indexed as fulltext searcheable: <parameter>STRING</parameter> and <parameter>BINARY</parameter>. - </para> - <table id="tabl-Reference_Guide-Property_Indexing-Fulltext_search_by_different_properties"> - <title>Fulltext search by different properties</title> - <tgroup cols="3"> - <thead> - <row> - <entry> Property Type </entry> - <entry> Fulltext search by all properties </entry> - <entry> Fulltext search by exact property </entry> - </row> - </thead> - <tbody> - <row> - <entry> STRING </entry> - <entry> YES </entry> - <entry> YES </entry> - </row> - <row> - <entry> BINARY </entry> - <entry> YES </entry> - <entry> NO </entry> - </row> - </tbody> - </tgroup> - </table> - <para> - For example, the <literal>jcr:data</literal> property (which is <parameter>BINARY</parameter>) will not be found with a query structured as: - </para> - <programlisting>SELECT * FROM nt:resource WHERE CONTAINS(jcr:data, &apos;some string&apos;)</programlisting> - <para> - This is because,&#160;<parameter>BINARY</parameter> is not searchable by fulltext search by exact property. - </para> - <para> - However, the following query <emphasis>will</emphasis> return some results (provided, of course they node contains the targeted data): - </para> - <programlisting>SELECT * FROM nt:resource WHERE CONTAINS( * , &apos;some string&apos;)</programlisting> - </section> - <section id="sect-Reference_Guide-Fulltext_Search_And_Affecting_Settings-Different_Analyzers"> - <title>Different Analyzers</title> - <para> - First of all, we will fill repository by nodes with mixin type &apos;mix:title&apos; and different values of &apos;jcr:description&apos; property. - </para> - <programlisting>root - ├── document1 (mix:title) jcr:description = &quot;The quick brown fox jumped over the lazy dogs&quot; - ├── document2 (mix:title) jcr:description = &quot;Brown fox live in forest.&quot; - └── document3 (mix:title) jcr:description = &quot;Fox is a nice animal.&quot; -</programlisting> - <para> - The example below shows different Analyzers in action. The first instance uses base JCR settings, so the string; &quot;<emphasis>The quick brown fox jumped over the lazy dogs</emphasis>&quot; will be transformed to the set; <emphasis role="bold">{[the] [quick] [brown] [fox] [jumped] [over] [the] [lazy] [dogs] }</emphasis>. - </para> - <programlisting language="Java" role="Java">// make SQL query -QueryManager queryManager = workspace.getQueryManager(); -String sqlStatement = &quot;SELECT * FROM mix:title WHERE CONTAINS(jcr:description, &apos;the&apos;)&quot;; -// create query -Query query = queryManager.createQuery(sqlStatement, Query.SQL); -// execute query and fetch result -QueryResult result = query.execute();</programlisting> - <para> - The <literal>NodeIterator</literal> will return <emphasis>document1</emphasis>. - </para> - <para> - However, if the default analyzer is changed to <literal>org.apache.lucene.analysis.StopAnalyzer</literal>, the repository populated again (the new Analyzer must process node properties) and the same query run, it will return nothing, because stop words like &quot;<emphasis>the</emphasis>&quot; will be excluded from parsed string set. - </para> - </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-WebDAV"> - <title>WebDAV</title> - <section id="sect-Reference_Guide-WebDAV-Introduction"> - <title>Introduction</title> - <para> - The <application>WebDAV</application> protocol enables you to use third party tools to communicate with hierarchical content servers via the HTTP protocol. It is possible to add and remove documents or a set of documents from a path on the server. - </para> - <para> - <application>DeltaV</application> is an extension of the WebDav protocol that allows managing document versioning. The <emphasis>Locking</emphasis> feature guarantees protection against multiple access when writing resources. The ordering support allows changing the position of the resource in the list and sort the directory to make the directory tree viewed conveniently. The full-text search makes it easy to find the necessary documents. You can search by using two languages: SQL and XPATH. - </para> - <para> - In the eXo JCR, the WebDAV layer (based on the code taken from the extension modules of the reference implementation) is plugged in on top of our JCR implementation. This makes it possible to browse a workspace using the third party tools regardless of operating system environments. You can use a Java WebDAV client, such as <application>DAVExplorer</application> or <application>Internet Explorer</application> using <menuchoice> - <guimenu>File</guimenu> - <guimenuitem>Open as a Web Folder</guimenuitem> - </menuchoice>. - </para> - <para> - WebDav is an extension of the REST service. To get the WebDav server ready, you must deploy the REST application. Then, you can access any workspaces of your repository by using the following URL: - </para> - <para> - <ulink url="http://host:port/portal/rest/private/jcr/{RepositoryName}/{WorkspaceName}/{Path}" type="http"/> - </para> - <para> - When accessing the WebDAV server via <ulink url="http://localhost:8080/rest/jcr/repository/production" type="http"/>, you can substitute <ulink url="http://localhost:8080/rest/jcr/repository/production" type="http">production</ulink> with <ulink url="http://localhost:8080/rest/jcr/repository/collaboration" type="http">collaboration</ulink>. - </para> - <para> - You will be asked to enter your login credentials. These will then be checked by using the organization service that can be implemented thanks to an InMemory (dummy) module or a DB module or an LDAP one and the JCR user session will be created with the correct JCR Credentials. - </para> - <note> - <title>Note:</title> - <para> - If you try the &quot;in ECM&quot; option, add &quot;@ecm&quot; to the user&apos;s password. Alternatively, you may modify jaas.conf by adding the <emphasis role="bold">domain=ecm</emphasis> option as follows: - </para> - <programlisting>exo-domain { - org.exoplatform.services.security.jaas.BasicLoginModule required domain=ecm; -};</programlisting> - </note> - </section> - <section id="sect-Reference_Guide-WebDAV-WebDAV_Configuration"> - <title>WebDAV Configuration</title> - <para> - The WebDAV configuration file: - </para> - <programlisting language="XML" role="XML">&lt;component&gt; - &lt;key&gt;org.exoplatform.services.webdav.WebDavServiceImpl&lt;/key&gt; - &lt;type&gt;org.exoplatform.services.webdav.WebDavServiceImpl&lt;/type&gt; - &lt;init-params&gt; - - &lt;!-- this parameter indicates the default login and password values - used as credentials for accessing the repository --&gt; - &lt;!-- value-param&gt; - &lt;name&gt;default-identity&lt;/name&gt; - &lt;value&gt;admin:admin&lt;/value&gt; - &lt;/value-param --&gt; - - &lt;!-- this is the value of WWW-Authenticate header --&gt; - &lt;value-param&gt; - &lt;name&gt;auth-header&lt;/name&gt; - &lt;value&gt;Basic realm=&quot;eXo-Platform Webdav Server 1.6.1&quot;&lt;/value&gt; - &lt;/value-param&gt; - - &lt;!-- default node type which is used for the creation of collections --&gt; - &lt;value-param&gt; - &lt;name&gt;def-folder-node-type&lt;/name&gt; - &lt;value&gt;nt:folder&lt;/value&gt; - &lt;/value-param&gt; - - &lt;!-- default node type which is used for the creation of files --&gt; - &lt;value-param&gt; - &lt;name&gt;def-file-node-type&lt;/name&gt; - &lt;value&gt;nt:file&lt;/value&gt; - &lt;/value-param&gt; - - &lt;!-- if MimeTypeResolver can&apos;t find the required mime type, - which conforms with the file extension, and the mimeType header is absent - in the HTTP request header, this parameter is used - as the default mime type--&gt; - &lt;value-param&gt; - &lt;name&gt;def-file-mimetype&lt;/name&gt; - &lt;value&gt;application/octet-stream&lt;/value&gt; - &lt;/value-param&gt; - - &lt;!-- This parameter indicates one of the three cases when you update the content of the resource by PUT command. - In case of &quot;create-version&quot;, PUT command creates the new version of the resource if this resource exists. - In case of &quot;replace&quot; - if the resource exists, PUT command updates the content of the resource and its last modification date. - In case of &quot;add&quot;, the PUT command tries to create the new resource with the same name (if the parent node allows same-name siblings).--&gt; - - &lt;value-param&gt; - &lt;name&gt;update-policy&lt;/name&gt; - &lt;value&gt;create-version&lt;/value&gt; - &lt;!--value&gt;replace&lt;/value --&gt; - &lt;!-- value&gt;add&lt;/value --&gt; - &lt;/value-param&gt; - - &lt;!-- - This parameter determines how service responds to a method that attempts to modify file content. - In case of &quot;checkout-checkin&quot; value, when a modification request is applied to a checked-in version-controlled resource, the request is automatically preceded by a checkout and followed by a checkin operation. - In case of &quot;checkout&quot; value, when a modification request is applied to a checked-in version-controlled resource, the request is automatically preceded by a checkout operation. - --&gt; - &lt;value-param&gt; - &lt;name&gt;auto-version&lt;/name&gt; - &lt;value&gt;checkout-checkin&lt;/value&gt; - &lt;!--value&gt;checkout&lt;/value --&gt; - &lt;/value-param&gt; - - &lt;!-- - This parameter is responsible for managing Cache-Control header value which will be returned to the client. - You can use patterns like &quot;text/*&quot;, &quot;image/*&quot; or wildcard to define the type of content. - --&gt; - &lt;value-param&gt; - &lt;name&gt;cache-control&lt;/name&gt; - &lt;value&gt;text/xml,text/html:max-age=3600;image/png,image/jpg:max-age=1800;*/*:no-cache;&lt;/value&gt; - &lt;/value-param&gt; - - &lt;!-- - This parameter determines the absolute path to the folder icon file, which is shown - during WebDAV view of the contents - --&gt; - &lt;value-param&gt; - &lt;name&gt;folder-icon-path&lt;/name&gt; - &lt;value&gt;/absolute/path/to/file&lt;/value&gt; - &lt;/value-param&gt; - - &lt;/init-params&gt; -&lt;/component&gt;</programlisting> - </section> - <section id="sect-Reference_Guide-WebDAV-Corresponding_WebDav_and_JCR_actions"> - <title>Corresponding WebDAV and JCR actions</title> - <table> - <title/> - <tgroup cols="2"> - <thead> - <row> - <entry> WebDav </entry> - <entry> JCR </entry> - </row> - </thead> - <tbody> - <row> - <entry> COPY </entry> - <entry> Workspace.copy(...) </entry> - </row> - <row> - <entry> DELETE </entry> - <entry> Node.remove() </entry> - </row> - <row> - <entry> GET </entry> - <entry> Node.getProperty(...); Property.getValue() </entry> - </row> - <row> - <entry> HEAD </entry> - <entry> Node.getProperty(...); Property.getLength() </entry> - </row> - <row> - <entry> MKCOL </entry> - <entry> Node.addNode(...) </entry> - </row> - <row> - <entry> MOVE </entry> - <entry> Session.move(...) or Workspace.move(...) </entry> - </row> - <row> - <entry> PROPFIND </entry> - <entry> Session.getNode(...); Node.getNode(...); Node.getNodes(...); Node.getProperties() </entry> - </row> - <row> - <entry> PROPPATCH </entry> - <entry> Node.setProperty(...); Node.getProperty(...).remove() </entry> - </row> - <row> - <entry> PUT </entry> - <entry> Node.addNode(&quot;node&quot;,&quot;nt:file&quot;); Node.setProperty(&quot;jcr:data&quot;, &quot;data&quot;) </entry> - </row> - <row> - <entry> CHECKIN </entry> - <entry> Node.checkin() </entry> - </row> - <row> - <entry> CHECKOUT </entry> - <entry> Node.checkout() </entry> - </row> - <row> - <entry> REPORT </entry> - <entry> Node.getVersionHistory(); VersionHistory.getAllVersions(); Version.getProperties() </entry> - </row> - <row> - <entry> RESTORE </entry> - <entry> Node.restore(...) </entry> - </row> - <row> - <entry> UNCHECKOUT </entry> - <entry> Node.restore(...) </entry> - </row> - <row> - <entry> VERSION-CONTROL </entry> - <entry> Node.addMixin(&quot;mix:versionable&quot;) </entry> - </row> - <row> - <entry> LOCK </entry> - <entry> Node.lock(...) </entry> - </row> - <row> - <entry> UNLOCK </entry> - <entry> Node.unlock() </entry> - </row> - <row> - <entry> ORDERPATCH </entry> - <entry> Node.orderBefore(...) </entry> - </row> - <row> - <entry> SEARCH </entry> - <entry> Workspace.getQueryManager(); QueryManager.createQuery(); Query.execute() </entry> - </row> - </tbody> - </tgroup> - </table> - </section> - <section id="sect-Reference_Guide-WebDAV-WebDAV_Considerations"> - <title>WebDAV Considerations</title> -<!-- DOCS NOTE: This content is duplicated in the Site Publisher User Guide to avoid cross-document linking. - Any changes here should also be made there--> <para> - There are some restrictions for WebDAV in different operating systems. - </para> - <formalpara id="form-Reference_Guide-WebDAV_Considerations-Windows_7"> - <title>Windows 7</title> - <para> - When attempting to set up a web folder through <guilabel>Add a Network Location</guilabel> or <guilabel>Map a Network Drive</guilabel> through <guilabel>My Computer</guilabel>, an error message stating <guilabel>The folder you entered does not appear to be valid. Please choose another</guilabel> or <guilabel>Windows cannot access … Check the spelling of the name. Otherwise, there might be …</guilabel> may be encountered. These errors may appear when you are using SSL or non-SSL. - </para> - </formalpara> - <para> - To fix this, do as follows: - </para> - <procedure> - <step> - <para> - Go to Windows Registry Editor. - </para> - </step> - <step> - <para> - Find a key: \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlset\services\WebClient\Parameters\BasicAuthLevel . - </para> - </step> - <step> - <para> - Change the value to 2. - </para> - </step> - </procedure> - <formalpara id="form-Reference_Guide-WebDAV_Considerations-Microsoft_Office_2010"> - <title>Microsoft Office 2010</title> - <para> - If you have: - </para> - </formalpara> - <itemizedlist> - <listitem> - <para> - Microsoft Office 2007/2010 applications installed on a client computer AND... - </para> - </listitem> - <listitem> - <para> - The client computer is connected to a web server configured for Basic authentication VIA... - </para> - </listitem> - <listitem> - <para> - A connection that does not use Secure Sockets Layer (SSL) AND... - </para> - </listitem> - <listitem> - <para> - You try to access an Office file that is stored on the remote server... - </para> - </listitem> - <listitem> - <para> - You might experience the following symptoms when you try to open or to download the file: - </para> - <itemizedlist> - <listitem> - <para> - The Office file does not open or download. - </para> - </listitem> - <listitem> - <para> - You do not receive a Basic authentication password prompt when you try to open or to download the file. - </para> - </listitem> - <listitem> - <para> - You do not receive an error message when you try to open the file. The associated Office application starts. However, the selected file does not open. - </para> - </listitem> - </itemizedlist> - </listitem> - </itemizedlist> - <para> - These outcomes can be circumvented by enabling Basic authentication on the client machine. - </para> - <para> - To enable Basic authentication on the client computer, follow these steps: - </para> - <procedure> - <step> - <para> - Click Start, type <literal>regedit</literal> in the Start Search box, and then press Enter. - </para> - </step> - <step> - <para> - Locate and then click the following registry subkey: - </para> - <para> - <envar>HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Common\Internet</envar> - </para> - </step> - <step> - <para> - On the <guilabel>Edit</guilabel> menu, point to <guilabel>New</guilabel>, and then click <guilabel>DWORD Value</guilabel>. - </para> - </step> - <step> - <para> - Type <literal>BasicAuthLevel</literal>, and then press <keycap>Enter</keycap>. - </para> - </step> - <step> - <para> - Right-click <literal>BasicAuthLevel</literal>, and then click <guilabel>Modify</guilabel>. - </para> - </step> - <step> - <para> - In the Value data box, type <literal>2</literal>, and then click <guilabel>OK</guilabel>. - </para> - </step> - </procedure> - </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-FTP"> - <title>FTP</title> - <section id="sect-Reference_Guide-FTP-Introduction"> - <title>Introduction</title> - <para> - The JCR-FTP Server operates as an FTP server with access to a content stored in JCR repositories in the form of <literal>nt:file/nt:folder</literal> nodes or their successors. The client of an executed Server can be any FTP client. The FTP server is supported by a standard configuration which can be changed as required. - </para> - </section> - <section id="sect-Reference_Guide-FTP-Configuration_Parameters"> - <title>Configuration Parameters</title> - <variablelist id="vari-Reference_Guide-Configuration_Parameters-Parameters"> - <title>Parameters</title> - <varlistentry> - <term>command-port:</term> - <listitem> - <programlisting language="XML" role="XML">&lt;value-param&gt; - &lt;name&gt;command-port&lt;/name&gt; - &lt;value&gt;21&lt;/value&gt; -&lt;/value-param&gt;</programlisting> - <para> - The value of the command channel port. The value &apos;<literal>21</literal>&apos; is default. - </para> - <para> - If you have already other FTP server installed in your system, this parameter needs to be changed (to <literal>2121</literal>, for example) to avoid conflicts or if the port is protected. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>data-min-port and data-max-port</term> - <listitem> - <programlisting language="XML" role="XML">&lt;value-param&gt; - &lt;name&gt;data-min-port&lt;/name&gt; - &lt;value&gt;52000&lt;/value&gt; -&lt;/value-param&gt;</programlisting> - <programlisting language="XML" role="XML">&lt;value-param&gt; - &lt;name&gt;data-max-port&lt;/name&gt; - &lt;value&gt;53000&lt;/value&gt; -&lt;/value-param&gt;</programlisting> - <para> - These two parameters indicate the minimum and maximum values of the range of ports, used by the server. The usage of the additional data channel is required by the FTP protocol, which is used to transfer the contents of files and the listing of catalogues. This range of ports should be free from listening by other server-programs. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>system</term> - <listitem> - <programlisting language="XML" role="XML">&lt;value-param&gt; - &lt;name&gt;system&lt;/name&gt; - - &lt;value&gt;Windows_NT&lt;/value&gt; - or - &lt;value&gt;UNIX Type: L8&lt;/value&gt; -&lt;/value-param&gt;</programlisting> - <para> - Types of formats of listing of catalogues which are supported. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>client-side-encoding</term> - <listitem> - <programlisting language="XML" role="XML">&lt;value-param&gt; - &lt;name&gt;client-side-encoding&lt;/name&gt; - - &lt;value&gt;windows-1251&lt;/value&gt; - or - &lt;value&gt;KOI8-R&lt;/value&gt; - -&lt;/value-param&gt;</programlisting> - <para> - This parameter specifies the coding which is used for dialogue with the client. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>def-folder-node-type</term> - <listitem> - <programlisting language="XML" role="XML">&lt;value-param&gt; - &lt;name&gt;def-folder-node-type&lt;/name&gt; - &lt;value&gt;nt:folder&lt;/value&gt; -&lt;/value-param&gt;</programlisting> - <para> - This parameter specifies the type of a node, when an FTP-folder is created. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>def-file-node-type</term> - <listitem> - <programlisting language="XML" role="XML">&lt;value-param&gt; - &lt;name&gt;def-file-node-type&lt;/name&gt; - &lt;value&gt;nt:file&lt;/value&gt; -&lt;/value-param&gt;</programlisting> - <para> - This parameter specifies the type of a node, when an FTP-file is created. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>def-file-mime-type</term> - <listitem> - <programlisting language="XML" role="XML">&lt;value-param&gt; - &lt;name&gt;def-file-mime-type&lt;/name&gt; - &lt;value&gt;application/zip&lt;/value&gt; -&lt;/value-param&gt;</programlisting> - <para> - The mime type of a created file is chosen by using its file extension. In case, a server cannot find the corresponding mime type, this value is used. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>cache-folder-name</term> - <listitem> - <programlisting language="XML" role="XML">&lt;value-param&gt; - &lt;name&gt;cache-folder-name&lt;/name&gt; - &lt;value&gt;../temp/ftp_cache&lt;/value&gt; -&lt;/value-param&gt;</programlisting> - <para> - The Path of the cache folder. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>upload-speed-limit</term> - <listitem> - <programlisting language="XML" role="XML">&lt;value-param&gt; - &lt;name&gt;upload-speed-limit&lt;/name&gt; - &lt;value&gt;20480&lt;/value&gt; -&lt;/value-param&gt;</programlisting> - <para> - Restriction of the upload speed. It is measured in bytes. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>download-speed-limit</term> - <listitem> - <programlisting language="XML" role="XML">&lt;value-param&gt; - &lt;name&gt;download-speed-limit&lt;/name&gt; - &lt;value&gt;20480&lt;/value&gt; -&lt;/value-param&gt;</programlisting> - <para> - Restriction of the download speed. It is measured in bytes. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>timeout</term> - <listitem> - <programlisting language="XML" role="XML">&lt;value-param&gt; - &lt;name&gt;timeout&lt;/name&gt; - &lt;value&gt;60&lt;/value&gt; -&lt;/value-param&gt;</programlisting> - <para> - Defines the value of a timeout. - </para> - </listitem> - </varlistentry> - </variablelist> - </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-Use_External_Backup_Tool"> - <title>Use External Backup Tool</title> - <section id="sect-Reference_Guide-Use_External_Backup_Tool-Repository_Suspending"> - <title>Repository Suspending</title> - <para> - To have the repository content consistent with the search index and value storage, the repository should be suspended. This means all working threads are suspended until a resume operation is performed. The index will be flushed. - </para> - <para> - JCR provides ability to suspend repository via JMX. - </para> - <figure> - <title id="repositorysuspendcontroller">Repository Suspend Controller</title> - <mediaobject> - <imageobject> - <imagedata width="444" fileref="images/eXoJCR/repository-suspend-controller.png"/> - </imageobject> - </mediaobject> - </figure> - <para> - To suspend repository you need to invoke the <literal>suspend()</literal> operation. The returned result will be &quot;<emphasis>suspended</emphasis>&quot; if everything passed successfully. - </para> - <figure> - <title id="repository-suspend-controller-suspended.">Repository Suspend Controller Suspended</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/eXoJCR/repository-suspend-controller-suspended.png"/> - </imageobject> - </mediaobject> - </figure> - <para> - An &quot;<emphasis>undefined</emphasis>&quot; result means not all components were successfully suspended. Check the console to review the stack traces. - </para> - </section> - <section id="sect-Reference_Guide-Use_External_Backup_Tool-Backup"> - <title>Backup</title> - <para> - You can backup your content manually or by using third part software. You should back up: - </para> - <itemizedlist> - <listitem> - <para> - Database. - </para> - </listitem> - <listitem> - <para> - Lucene index. - </para> - </listitem> - <listitem> - <para> - Value storage (if configured). - </para> - </listitem> - </itemizedlist> - </section> - <section id="sect-Reference_Guide-Use_External_Backup_Tool-Repository_Resuming"> - <title>Repository Resuming</title> - <para> - Once a backup is done you need to invoke the <literal>resume()</literal> operation to switch the repository back to on-line. The returned result will be &quot;<emphasis>on-line</emphasis>&quot;. - </para> - <figure> - <title id="repository-suspend-controller-online.">Repository Suspend Controller Online</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/eXoJCR/repository-suspend-controller-online.png"/> - </imageobject> - </mediaobject> - </figure> - </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-eXo_JCR_statistics"> - <title>eXo JCR statistics</title> - <section id="sect-Reference_Guide-eXo_JCR_statistics-Statistics_on_the_Database_Access_Layer"> - <title>Statistics on the Database Access Layer</title> - <para> - In order to have a better idea of the time spent into the database access layer, it can be interesting to get some statistics on that part of the code, knowing that most of the time spent into eXo JCR is mainly the database access. - </para> - <para> - These statistics will then allow you to identify, without using any profiler, what is abnormally slow in this layer which could help diagnose, and fix, a problem. - </para> - <para> - If you use <envar>org.exoplatform.services.jcr.impl.storage.jdbc.optimisation.CQJDBCWorkspaceDataContainer</envar> or <envar>org.exoplatform.services.jcr.impl.storage.jdbc.JDBCWorkspaceDataContainer</envar> as <envar>WorkspaceDataContainer</envar>, you can get statistics on the time spent into the database access layer. - </para> - <para> - The database access layer (in eXo JCR) is represented by the methods of the interface <envar>org.exoplatform.services.jcr.storage.WorkspaceStorageConnection</envar>, so for all the methods defined in this interface, we can have the following figures: - </para> - <itemizedlist> - <listitem> - <para> - The minimum time spent into the method. - </para> - </listitem> - <listitem> - <para> - The maximum time spent into the method. - </para> - </listitem> - <listitem> - <para> - The average time spent into the method. - </para> - </listitem> - <listitem> - <para> - The total amount of time spent into the method. - </para> - </listitem> - <listitem> - <para> - The total amount of time the method has been called. - </para> - </listitem> - </itemizedlist> - <para> - Those figures are also available globally for all the methods which gives us the global behavior of this layer. - </para> - <para> - If you want to enable the statistics, you just need to set the JVM parameter called <parameter>JDBCWorkspaceDataContainer.statistics.enabled</parameter> to <emphasis>true</emphasis>. The corresponding CSV file is <filename>StatisticsJDBCStorageConnection-${creation-timestamp}.csv</filename> for more details about how the CSV files are managed, please refer to the section dedicated to the statistics manager. - </para> - <para> - The format of each column header is <replaceable>${method-alias}</replaceable>-<replaceable>${metric-alias}</replaceable>. The metric alias are described in the statistics manager section. - </para> - <para> - The name of the category of statistics corresponding to these statistics is <literal>JDBCStorageConnection</literal>, this name is mostly needed to access to the statistics through JMX. - </para> - <table id="tabl-Reference_Guide-Statistics_on_the_Database_Access_Layer-Method_Alias"> - <title>Method Alias</title> - <tgroup cols="2"> - <tbody> - <row> - <entry> global </entry> - <entry> This is the alias for all the methods. </entry> - </row> - <row> - <entry> getItemDataById </entry> - <entry> This is the alias for the method <emphasis>getItemData(String identifier).</emphasis></entry> - </row> - <row> - <entry> getItemDataByNodeDataNQPathEntry </entry> - <entry> This is the alias for the method <emphasis>getItemData(NodeData parentData, QPathEntry name).</emphasis></entry> - </row> - <row> - <entry> getChildNodesData </entry> - <entry> This is the alias for the method <emphasis>getChildNodesData(NodeData parent).</emphasis></entry> - </row> - <row> - <entry> getChildNodesCount </entry> - <entry> This is the alias for the method <emphasis>getChildNodesCount(NodeData parent).</emphasis></entry> - </row> - <row> - <entry> getChildPropertiesData </entry> - <entry> This is the alias for the method <emphasis>getChildPropertiesData(NodeData parent).</emphasis></entry> - </row> - <row> - <entry> listChildPropertiesData </entry> - <entry> This is the alias for the method <emphasis>listChildPropertiesData(NodeData parent).</emphasis></entry> - </row> - <row> - <entry> getReferencesData </entry> - <entry> This is the alias for the method <emphasis>getReferencesData(String nodeIdentifier).</emphasis></entry> - </row> - <row> - <entry> commit </entry> - <entry> This is the alias for the method <emphasis>commit().</emphasis></entry> - </row> - <row> - <entry> addNodeData </entry> - <entry> This is the alias for the method <emphasis>add(NodeData data).</emphasis></entry> - </row> - <row> - <entry> addPropertyData </entry> - <entry> This is the alias for the method <emphasis>add(PropertyData data).</emphasis></entry> - </row> - <row> - <entry> updateNodeData </entry> - <entry> This is the alias for the method <emphasis>update(NodeData data).</emphasis></entry> - </row> - <row> - <entry> updatePropertyData </entry> - <entry> This is the alias for the method <emphasis>update(PropertyData data).</emphasis></entry> - </row> - <row> - <entry> deleteNodeData </entry> - <entry> This is the alias for the method <emphasis>delete(NodeData data).</emphasis></entry> - </row> - <row> - <entry> deletePropertyData </entry> - <entry> This is the alias for the method <emphasis>delete(PropertyData data).</emphasis></entry> - </row> - <row> - <entry> renameNodeData </entry> - <entry> This is the alias for the method <emphasis>rename(NodeData data).</emphasis></entry> - </row> - <row> - <entry> rollback </entry> - <entry> This is the alias for the method <emphasis>rollback().</emphasis></entry> - </row> - <row> - <entry> isOpened </entry> - <entry> This is the alias for the method <emphasis>isOpened().</emphasis></entry> - </row> - <row> - <entry> close </entry> - <entry> This is the alias for the method <emphasis>close().</emphasis></entry> - </row> - </tbody> - </tgroup> - </table> - </section> - <section id="sect-Reference_Guide-eXo_JCR_statistics-Statistics_on_the_JCR_API_accesses"> - <title>Statistics on the JCR API accesses</title> - <para> - In order to know exactly how your application uses eXo JCR, it can be interesting to register all the JCR API accesses in order to easily create real life test scenario based on pure JCR calls and also to tune your JCR to better fit your requirements. - </para> - <para> - In order to allow you to specify the configuration which part of eXo JCR needs to be monitored without applying any changes in your code and/or building anything, we choose to rely on the Load-time Weaving proposed by AspectJ. - </para> - <para> - To enable this feature, you will have to add in your classpath the following jar files: - </para> - <itemizedlist> - <listitem> - <para> - <emphasis>exo.jcr.component.statistics-X.Y.Z</emphasis>.jar corresponding to your eXo JCR version that you can get from the JBoss maven repository <ulink url="https://repository.jboss.org/nexus/content/groups/public/org/ex...;. - </para> - </listitem> - <listitem> - <para> - aspectjrt-1.6.8.jar that you can get from the main maven repository <ulink url="http://repo2.maven.org/maven2/org/aspectj/aspectjrt"> - <uri>http://repo2.maven.org/maven2/org/aspectj/aspectjrt</uri> - </ulink>. - </para> - </listitem> - </itemizedlist> - <para> - You will also need to get <filename>aspectjweaver-1.6.8.jar</filename> from the main maven repository <ulink url="http://repo2.maven.org/maven2/org/aspectj/aspectjweaver"&g...;. - </para> - <para> - At this stage, to enable the statistics on the JCR API accesses, you will need to add the JVM parameter <parameter>-javaagent:${pathto}/aspectjweaver-1.6.8.jar</parameter> to your command line, for more details please refer to <ulink url="http://www.eclipse.org/aspectj/doc/released/devguide/ltw-config...;. - </para> - <para> - By default, the configuration will collect statistics on all the methods of the internal interfaces <literal>org.exoplatform.services.jcr.core.ExtendedSession</literal> and <literal>org.exoplatform.services.jcr.core.ExtendedNode</literal>, and the JCR API interface <literal>javax.jcr.Property</literal>. - </para> - <para> - To add and/or remove some interfaces to monitor, you have two configuration files to change that are bundled into the jar <literal>exo.jcr.component.statistics-X.Y.Z</literal>.jar, which are <filename>conf/configuration.xml</filename> and <filename>META-INF/aop.xml</filename>. - </para> - <para> - The file content below is the content of <filename>conf/configuration.xml</filename> that you will need to modify to add and/or remove the full qualified name of the interfaces to monitor, into the list of parameter values of the init param called <literal>targetInterfaces</literal>. - </para> - <programlisting language="XML" role="XML">&lt;configuration xmlns:xsi=&quot;http://www.w3.org/2001/XMLSchema-instance&quot; xsi:schemaLocation=&quot;http://www.exoplaform.org/xml/ns/kernel_1_2.xsd http://www.exoplaform.org/xml/ns/kernel_1_2.xsd&quot; - xmlns=&quot;http://www.exoplaform.org/xml/ns/kernel_1_2.xsd&quot;... - - &lt;component&gt; - &lt;type&gt;org.exoplatform.services.jcr.statistics.JCRAPIAspectConfig&lt;/type&gt; - &lt;init-params&gt; - &lt;values-param&gt; - &lt;name&gt;targetInterfaces&lt;/name&gt; - &lt;value&gt;org.exoplatform.services.jcr.core.ExtendedSession&lt;/value&gt; - &lt;value&gt;org.exoplatform.services.jcr.core.ExtendedNode&lt;/value&gt; - &lt;value&gt;javax.jcr.Property&lt;/value&gt; - &lt;/values-param&gt; - &lt;/init-params&gt; - &lt;/component&gt; -&lt;/configuration&gt;</programlisting> - <para> - The file content below is the content of <filename>META-INF/aop.xml</filename> that you will to need to modify to add and/or remove the full qualified name of the interfaces to monitor, into the expression filter of the pointcut called <literal>JCRAPIPointcut</literal>. - </para> - <para> - By default only JCR API calls from the <literal>exoplatform</literal> packages are taken into account. This filter can be modified to add other package names. - </para> - <programlisting language="XML" role="XML">&lt;aspectj&gt; - &lt;aspects&gt; - &lt;concrete-aspect name=&quot;org.exoplatform.services.jcr.statistics.JCRAPIAspectImpl&quot; extends=&quot;org.exoplatform.services.jcr.statistics.JCRAPIAspect&quot;&gt; - &lt;pointcut name=&quot;JCRAPIPointcut&quot; - expression=&quot;(target(org.exoplatform.services.jcr.core.ExtendedSession) || target(org.exoplatform.services.jcr.core.ExtendedNode) || target(javax.jcr.Property)) &amp;&amp; call(public * *(..))&quot; /&gt; - &lt;/concrete-aspect&gt; - &lt;/aspects&gt; - &lt;weaver options=&quot;-XnoInline&quot;&gt; - &lt;include within=&quot;org.exoplatform..*&quot; /&gt; - &lt;/weaver&gt; -&lt;/aspectj&gt;</programlisting> - <para> - The corresponding CSV files are of type <filename>Statistics<replaceable>${interface-name}</replaceable>-<replaceable>${creation-timestamp}</replaceable>.csv</filename> for more details about how the <emphasis>CSV</emphasis> files are managed, please refer to the section dedicated to the statistics manager. - </para> - <para> - The format of each column header is <replaceable>${method-alias}</replaceable>-<replaceable>${metric-alias}</replaceable>. The method alias will be of type <replaceable>${method-name}(semicolon-delimited-list-of-parameter-types-to-be-compatible-with-the-CSV-format)</replaceable>. - </para> - <para> - The metric alias are described in the statistics manager section. - </para> - <para> - The name of the category of statistics corresponding to these statistics is the simple name of the monitored interface (e.g. <literal>ExtendedSession</literal> for <literal>org.exoplatform.services.jcr.core.ExtendedSession</literal>), this name is mostly needed to access to the statistics through JMX. - </para> - <note> - <title>Performance Consideration</title> - <para> - Please note that this feature will affect the performances of eXo JCR so it must be used with caution. - </para> - </note> - </section> - <section id="sect-Reference_Guide-eXo_JCR_statistics-Statistics_Manager"> - <title>Statistics Manager</title> - <para> - The statistics manager manages all the statistics provided by eXo JCR, it is responsible of printing the data into the CSV files and also exposing the statistics through JMX and/or Rest. - </para> - <para> - The statistics manager will create all the CSV files for each category of statistics that it manages, the format of those files is <emphasis>Statistics${category-name}-${creation-timestamp}.csv</emphasis>. Those files will be created into the user directory if it is possible otherwise it will create them into the temporary directory. The format of those files is <envar>CSV</envar> (i.e. Comma-Separated Values), one new line will be added regularly (every 5 seconds by default) and one last line will be added at JVM exit. Each line, will be composed of the 5 figures described below for each method and globally for all the methods. - </para> - <para> - <table id="tabl-Reference_Guide-Statistics_Manager-Metric_Alias"> - <title>Metric Alias</title> - <tgroup cols="2"> - <tbody> - <row> - <entry> Min </entry> - <entry> The minimum time spent into the method expressed in milliseconds. </entry> - </row> - <row> - <entry> Max </entry> - <entry> The maximum time spent into the method expressed in milliseconds. </entry> - </row> - <row> - <entry> Total </entry> - <entry> The total amount of time spent into the method expressed in milliseconds. </entry> - </row> - <row> - <entry> Avg </entry> - <entry> The average time spent into the method expressed in milliseconds. </entry> - </row> - <row> - <entry> Times </entry> - <entry> The total amount of times the method has been called. </entry> - </row> - </tbody> - </tgroup> - </table> - You can disable the persistence of the statistics by setting the JVM parameter called <parameter>JCRStatisticsManager.persistence.enabled</parameter> to <literal>false</literal>. It is set to <literal>true</literal> by default. - </para> - <para> - You can also define the period of time between each record (that is, line of data into the file) by setting the JVM parameter called <parameter>JCRStatisticsManager.persistence.timeout</parameter> to your expected value expressed in milliseconds. It is set to <literal>5000</literal> by default. - </para> - <para> - You can also access to the statistics via JMX. The available methods are: - </para> - <para> - <table id="tabl-Reference_Guide-Statistics_Manager-JMX_Methods"> - <title>JMX Methods</title> - <tgroup cols="2"> - <tbody> - <row> - <entry> getMin </entry> - <entry> Give the minimum time spent into the method corresponding to the given category name and statistics name. The expected arguments are the name of the category of statistics (<literal>JDBCStorageConnection</literal> for example) and the name of the expected method or global for the global value. </entry> - </row> - <row> - <entry> getMax </entry> - <entry> Give the maximum time spent into the method corresponding to the given category name and statistics name. The expected arguments are the name of the category of statistics and the name of the expected method or global for the global value. </entry> - </row> - <row> - <entry> getTotal </entry> - <entry> Give the total amount of time spent into the method corresponding to the given category name and statistics name. The expected arguments are the name of the category of statistics and the name of the expected method or global for the global value. </entry> - </row> - <row> - <entry> getAvg </entry> - <entry> Give the average time spent into the method corresponding to the given category name and statistics name. The expected arguments are the name of the category of statistics and the name of the expected method or global for the global value. </entry> - </row> - <row> - <entry> getTimes </entry> - <entry> Give the total amount of times the method has been called corresponding to the given category name and statistics name. The expected arguments are the name of the category of statistics (e.g. JDBCStorageConnection) and the name of the expected method or global for the global value. </entry> - </row> - <row> - <entry> reset </entry> - <entry> Reset the statistics for the given category name and statistics name. The expected arguments are the name of the category of statistics and the name of the expected method or global for the global value. </entry> - </row> - <row> - <entry> resetAll </entry> - <entry> Reset all the statistics for the given category name. The expected argument is the name of the category of statistics (e.g. JDBCStorageConnection). </entry> - </row> - </tbody> - </tgroup> - </table> - The full name of the related MBean is <literal>xo:service=statistic, view=jcr</literal>. - </para> - </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-Checking_repository_integrity_and_consistency"> - <title>Checking repository integrity and consistency</title> - <section id="sect-Reference_Guide-Checking_repository_integrity_and_consistency-JMX_based_consistency_tool"> - <title>JMX-based consistency tool</title> - <para> - It is important to check the integrity and consistency of system regularly, especially if there is no, or stale, backups. The JBoss Portal Platform JCR implementation offers an innovative JMX-based complex checking tool. - </para> - <para> - During an inspection, the tool checks every major JCR component, such as persistent data layer and the index. The persistent layer includes JDBC Data Container and Value-Storages if they are configured. - </para> - <para> - The database is verified using the set of complex specialized domain-specific queries. The Value Storage tool checks the existence of, and access to, each file. - </para> - <para> - Access to the check tool is exposed via the JMX interface, with the following operations available: - </para> - <table id="tabl-Reference_Guide-JMX_based_consistency_tool-Available_methods"> - <title>Available methods</title> - <tgroup cols="2"> - <tbody> - <row> - <entry> - <code>checkRepositoryDataConsistency()</code> - </entry> - <entry> Inspect full repository data (db, value storage and search index) </entry> - </row> - <row> - <entry> - <code>checkRepositoryDataBaseConsistency()</code> - </entry> - <entry> Inspect only DB </entry> - </row> - <row> - <entry> - <code>checkRepositoryValueStorageConsistency()</code> - </entry> - <entry> Inspect only ValueStorage </entry> - </row> - <row> - <entry> - <code>checkRepositorySearchIndexConsistency()</code> - </entry> - <entry> Inspect only SearchIndex </entry> - </row> - </tbody> - </tgroup> - </table> - <para> - All inspection activities and corrupted data details are stored in a file in the <filename>app</filename> directory and named as per the following convention: <code> report-<replaceable>&lt;repository name&gt;</replaceable>-<replaceable>dd-MMM-yy-HH-mm</replaceable>.txt </code>. - </para> - <para> - The path to the file will be returned in result message also at the end of the inspection. - </para> - <note> - <para> - There are three types of inconsistency (Warning, Error and Index) and two of them are critical (Errors and Index): - </para> - <itemizedlist> - <listitem> - <para> - Index faults are marked as &quot;Reindex&quot; and can be fixed by re-indexing the workspace. - </para> - </listitem> - <listitem> - <para> - Errors can only be fixed manually. - </para> - </listitem> - <listitem> - <para> - Warnings can be a normal situation in some cases and usually production system will still remain fully functional. - </para> - </listitem> - </itemizedlist> - </note> - </section> - </chapter> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/configuration/search-configuration.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/configuration/jdbc-data-container-config.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/configuration/external-value-storages.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/configuration/workspace-persistence-storage.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/cluster-config.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/jbosscache-configuration-templates.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/lock-manager-config.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/query-handler-config.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/jbossts-transaction-service.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/searching/jcr-query-usecases.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/searching/searching-repository-content.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/searching/fulltext-search-and-settings.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/protocols/webdav.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/protocols/ftp.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/backup/use-external-backup-tool.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/statistics.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/repository-check-controller.xml"/> <!-- tuning guide - DOC NOTE: Could possibly be moved to a specific Tuning Guide later --> <chapter xmlns="" id="chap-Reference_Guide-JCR_Performance_Tuning_Guide"> - <title>JCR Performance Tuning Guide</title> - <section id="sect-Reference_Guide-JCR_Performance_Tuning_Guide-Introduction"> - <title>Introduction</title> - <para> - This section will show you various ways of improving JCR performance. - </para> - <para> - It is intended for Administrators and others who want to use the JCR features more efficiently. - </para> - </section> - <section id="sect-Reference_Guide-JCR_Performance_Tuning_Guide-JCR_Performance_and_Scalability"> - <title>JCR Performance and Scalability</title> - <section id="sect-Reference_Guide-JCR_Performance_and_Scalability-Cluster_configuration"> - <title>Cluster configuration</title> - <para> - The table below contains details about the configuration of the cluster used in benchmark testing: - </para> - <table id="tabl-Reference_Guide-Cluster_configuration-EC2_network_1Gbit"> - <title>EC2 network: 1Gbit</title> - <tgroup cols="2"> - <colspec colname="1"/> - <colspec colname="2"/> - <spanspec namest="1" nameend="2" spanname="hspan"/> - <thead> - <row> - <entry> Servers hardware </entry> - <entry> Specification </entry> - </row> - </thead> - <tbody> - <row> - <entry> RAM </entry> - <entry> 7.5 GB </entry> - </row> - <row> - <entry> Processors </entry> - <entry> 4 EC2 Compute Units (2 virtual cores with 2 EC2 Compute Units each) </entry> - </row> - <row> - <entry> Storage </entry> - <entry> 850 GB (2×420 GB plus 10 GB root partition) </entry> - </row> - <row> - <entry> Architecture </entry> - <entry> 64-bit </entry> - </row> - <row> - <entry> I/O Performance </entry> - <entry> High </entry> - </row> - <row> - <entry> API name </entry> - <entry> - <literal>m1.large</literal> - </entry> - </row> - <row> - <entry spanname="hspan"> - <emphasis role="bold">Note:</emphasis> - </entry> - </row> - <row> - <entry spanname="hspan"> NFS and statistics (cacti snmp) server were located on one physical server. </entry> - </row> - <row> - <entry spanname="hspan"> - <emphasis role="bold">JBoss Enterprise Application Platform 6 configuration:</emphasis> - </entry> - </row> - <row> - <entry spanname="hspan"> - <code>JAVA_OPTS: -Dprogram.name=run.sh -server -Xms4g -Xmx4g -XX:MaxPermSize=512m -Dorg.jboss.resolver.warning=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -XX:+UseParallelGC -Djava.net.preferIPv4Stack=true</code> - </entry> - </row> - </tbody> - </tgroup> - </table> - </section> - <section id="sect-Reference_Guide-JCR_Performance_and_Scalability-JCR_Clustered_Performance"> - <title>JCR Clustered Performance</title> - <para> - Benchmark test using WebDAV (Complex read/write load test (benchmark)) with 20K same file. To obtain per-operation results we have used custom output from the test case threads to CSV file. - </para> - <para> - <citetitle>Read operation</citetitle>: - <simplelist> - <member>Warm-up iterations: 100</member> - <member>Run iterations: 2000</member> - <member>Background writing threads: 25</member> - <member>Reading threads: 225</member> - </simplelist> - - </para> - <figure> - <title id="perf_EC2_result">EC2 Performance Results</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/eXoJCR/perf_EC2_results.jpg"/> - </imageobject> - </mediaobject> - </figure> - <table> - <title/> - <tgroup cols="4"> - <thead> - <row> - <entry> Nodes count </entry> - <entry> tps </entry> - <entry> Responses &gt;2s </entry> - <entry> Responses &gt;4s </entry> - </row> - </thead> - <tbody> - <row> - <entry> 1 </entry> - <entry> 523 </entry> - <entry> 6.87% </entry> - <entry> 1.27% </entry> - </row> - <row> - <entry> 2 </entry> - <entry> 1754 </entry> - <entry> 0.64% </entry> - <entry> 0.08% </entry> - </row> - <row> - <entry> 3 </entry> - <entry> 2388 </entry> - <entry> 0.49% </entry> - <entry> 0.09% </entry> - </row> - <row> - <entry> 4 </entry> - <entry> 2706 </entry> - <entry> 0.46% </entry> - <entry> 0.1% </entry> - </row> - </tbody> - </tgroup> - </table> - <para> - <citetitle>Read operation with more threads</citetitle>: - </para> - <simplelist> - <member>Warm-up iterations: 100</member> - <member>Run iterations: 2000</member> - <member>Background writing threads: 50</member> - <member>Reading threads: 450</member> - </simplelist> - <figure> - <title id="perf_EC2_result2">EC2 Performance Results 2</title> - <mediaobject> - <imageobject> - <imagedata fileref="images/eXoJCR/perf_EC2_results_2.jpg"/> - </imageobject> - </mediaobject> - </figure> - <table> - <title/> - <tgroup cols="4"> - <thead> - <row> - <entry> Nodes count </entry> - <entry> tps </entry> - <entry> Responses &gt;2s </entry> - <entry> Responses &gt;4s </entry> - </row> - </thead> - <tbody> - <row> - <entry> 1 </entry> - <entry> 116 </entry> - <entry> ? </entry> - <entry> ? </entry> - </row> - <row> - <entry> 2 </entry> - <entry> 1558 </entry> - <entry> 6.1% </entry> - <entry> 0.6% </entry> - </row> - <row> - <entry> 3 </entry> - <entry> 2242 </entry> - <entry> 3.1% </entry> - <entry> 0.38% </entry> - </row> - <row> - <entry> 4 </entry> - <entry> 2756 </entry> - <entry> 2.2% </entry> - <entry> 0.41% </entry> - </row> - </tbody> - </tgroup> - </table> - </section> - </section> - <section id="sect-Reference_Guide-JCR_Performance_Tuning_Guide-Performance_Tuning_Guide"> - <title>Performance Tuning Guide</title> - <section id="sect-Reference_Guide-Performance_Tuning_Guide-JBoss_AS_Tuning"> - <title>JBoss Enterprise Application Platform 6 Tuning</title> - <para> - You can use <parameter>maxThreads</parameter> parameter to increase maximum amount of threads that can be launched in AS instance. This can improve performance if you need a high level of concurrency. also you can use <code>-XX:+UseParallelGC</code> java directory to use parallel garbage collector. - </para> - <note> - <title>Note</title> - <para> - Beware of setting <parameter>maxThreads</parameter> too big, this can cause <exceptionname>OutOfMemoryError</exceptionname>. We&apos;ve got it with <code>maxThreads=1250</code> on such machine: - </para> - <simplelist> - <member>7.5 GB memory</member> - <member>4 EC2 Compute Units (2 virtual cores with 2 EC2 Compute Units each)</member> - <member>850 GB instance storage (2×420 GB plus 10 GB root partition)</member> - <member>64-bit platform</member> - <member>I/O Performance: High</member> - <member>API name: m1.large</member> - <member>java -Xmx 4g</member> - </simplelist> - </note> - </section> - <section id="sect-Reference_Guide-Performance_Tuning_Guide-JCR_Cache_Tuning"> - <title>JCR Cache Tuning</title> - <para> - <citetitle>Cache size</citetitle> - </para> - <para> - JCR-cluster implementation is built using JBoss Cache as distributed, replicated cache. But there is one particularity related to remove action in it. Speed of this operation depends on the actual size of cache. As many nodes are currently in cache as much time is needed to remove one particular node (subtree) from it. - </para> - <para> - <citetitle>Eviction</citetitle> - </para> - <para> - Manipulations with eviction <parameter>wakeUpInterval</parameter> value does not affect on performance. Performance results with values from 500 up to 3000 are approximately equal. - </para> - <para> - <citetitle>Transaction Timeout</citetitle> - </para> - <para> - Using short timeout for long transactions such as Export/Import, removing huge subtree defined timeout may cause <exceptionname>TransactionTimeoutException</exceptionname>. - </para> - </section> - <section id="sect-Reference_Guide-Performance_Tuning_Guide-Clustering"> - <title>Clustering</title> - <para> - For performance it is better to have a load-balancer, DB server and shared NFS on different computers. If in some reasons you see that one node gets more load than others you can decrease this load using load value in load balancer. - </para> - <para> - <citetitle>JGroups configuration</citetitle> - </para> - <para> - It&apos;s recommended to use &quot;multiplexer stack&quot; feature present in JGroups. It is set by default in eXo JCR and offers higher performance in cluster, using less network connections also. If there are two or more clusters in your network, please check that they use different ports and different cluster names. - </para> - <para> - <citetitle>Write performance in cluster</citetitle> - </para> - <para> - Exo JCR implementation uses Lucene indexing engine to provide search capabilities. But Lucene brings some limitations for write operations: it can perform indexing only in one thread. That is why write performance in cluster is not higher than in singleton environment. Data is indexed on coordinator node, so increasing write-load on cluster may lead to ReplicationTimeout exception. It occurs because writing threads queue in the indexer and under high load timeout for replication to coordinator will be exceeded. - </para> - <para> - Taking in consideration this fact, it is recommended to exceed <parameter>replTimeout</parameter> value in cache configurations in case of high write-load. - </para> - <para> - <citetitle>Replication timeout</citetitle> - </para> - <para> - Some operations may take too much time. So if you get <exceptionname>ReplicationTimeoutException</exceptionname> try increasing replication timeout: - </para> - <programlisting language="XML" role="XML"> &lt;clustering mode=&quot;replication&quot; clusterName=&quot;${jbosscache-cluster-name}&quot;&gt; - ... - &lt;sync replTimeout=&quot;60000&quot; /&gt; - &lt;/clustering&gt; -</programlisting> - <para> - value is set in milliseconds. - </para> - </section> -<!-- <section id="sect-Reference_Guide-Performance_Tuning_Guide-JVM_parameters"> - <title>JVM parameters</title> - <para> - <citetitle>PermGen space size</citetitle> - </para> - <para> - If you intend to use Infinispan, you will have to increase the PermGen size to at least 256 Mo due to the latest versions of JGroups that are needed by Infinispan (please note that Infinspan is only dedicated to the community for now, no support will be provided). In case, you intend to use JBoss Cache, you can keep on using JGroups 2.6.13.GA which means that you don't need to increase the PermGen size. - </para> - - </section> --> </section> - </chapter> - <chapter xmlns="" id="chap-Reference_Guide-eXo_JCR_with_GateIn"> - <title>eXo JCR with JBoss Portal Platform</title> - <section xmlns="" id="sect-Reference_Guide-How_to_use_AS_Managed_DataSource_under_JBoss_AS"> - <title>How to use a Managed DataSource under JBoss Enterprise Application Platform 6</title> - <section id="sect-Reference_Guide-How_to_use_AS_Managed_DataSource_under_JBoss_AS-Configurations_Steps"> - <title>Configurations Steps</title> - <section id="sect-Reference_Guide-Configurations_Steps-Declaring_the_datasources_in_the_AS"> - <title>Declaring the Datasources in the AS</title> - <remark>NEEDINFO - FILE PATHS - I know this isn&apos;t right. Where do these get deployed again?</remark> - <para> - To declare the datasources using a JBoss application server, deploy a <literal>ds</literal> file (<filename><replaceable>XXX</replaceable>-ds.xml</filename>) into the <emphasis>deploy</emphasis> directory of the appropriate server profile (<filename>/server/<replaceable>PROFILE</replaceable>/deploy</filename>, for example). - </para> - <para> - This file configures all datasources which JBoss Portal Platform will need (there should be four specifically named: <emphasis>jdbcjcr_portal</emphasis>, <emphasis>jdbcjcr_portal-sample</emphasis>, <emphasis>jdbcidm_portal</emphasis> and <emphasis>jdbcidm_sample-portal</emphasis>). - </para> - <para> - For example: - </para> - <programlisting language="XML" role="XML">&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?&gt; -&lt;datasources&gt; - &lt;no-tx-datasource&gt; - &lt;jndi-name&gt;jdbcjcr_portal&lt;/jndi-name&gt; - &lt;connection-url&gt;jdbc:hsqldb:${jboss.server.data.dir}/data/jdbcjcr_portal&lt;/connection-url&gt; - &lt;driver-class&gt;org.hsqldb.jdbcDriver&lt;/driver-class&gt; - &lt;user-name&gt;sa&lt;/user-name&gt; - &lt;password&gt;&lt;/password&gt; - &lt;/no-tx-datasource&gt; - - &lt;no-tx-datasource&gt; - &lt;jndi-name&gt;jdbcjcr_sample-portal&lt;/jndi-name&gt; - &lt;connection-url&gt;jdbc:hsqldb:${jboss.server.data.dir}/data/jdbcjcr_sample-portal&lt;/connection-url&gt; - &lt;driver-class&gt;org.hsqldb.jdbcDriver&lt;/driver-class&gt; - &lt;user-name&gt;sa&lt;/user-name&gt; - &lt;password&gt;&lt;/password&gt; - &lt;/no-tx-datasource&gt; - - &lt;no-tx-datasource&gt; - &lt;jndi-name&gt;jdbcidm_portal&lt;/jndi-name&gt; - &lt;connection-url&gt;jdbc:hsqldb:${jboss.server.data.dir}/data/jdbcidm_portal&lt;/connection-url&gt; - &lt;driver-class&gt;org.hsqldb.jdbcDriver&lt;/driver-class&gt; - &lt;user-name&gt;sa&lt;/user-name&gt; - &lt;password&gt;&lt;/password&gt; - &lt;/no-tx-datasource&gt; - - &lt;no-tx-datasource&gt; - &lt;jndi-name&gt;jdbcidm_sample-portal&lt;/jndi-name&gt; - &lt;connection-url&gt;jdbc:hsqldb:${jboss.server.data.dir}/data/jdbcidm_sample-portal&lt;/connection-url&gt; - &lt;driver-class&gt;org.hsqldb.jdbcDriver&lt;/driver-class&gt; - &lt;user-name&gt;sa&lt;/user-name&gt; - &lt;password&gt;&lt;/password&gt; - &lt;/no-tx-datasource&gt; -&lt;/datasources&gt;</programlisting> - <para> - The properties can be set for datasource can be found here: <ulink url="http://docs.jboss.org/jbossas/docs/Server_Configuration_Guide/4... JDBC DataSources - The non transactional DataSource configuration schema</ulink> - </para> - </section> - <section id="sect-Reference_Guide-Configurations_Steps-Do_not_bind_datasources_explicitly"> - <title>Do not bind datasources explicitly</title> - <para> - Do not let the portal explicitly bind datasources. </para> - <remark>NEEDINFO - FILE PATHS - I think some of the values have changed in the referenced file when I look at the new file below. New info required?</remark> - <para>Edit the <filename><replaceable>JPP_HOME</replaceable>/standalone/configuration/gatein/configuration.properties</filename> and comment out the following rows in the JCR section: - </para> - <programlisting>#gatein.jcr.datasource.driver=org.hsqldb.jdbcDriver -#gatein.jcr.datasource.url=jdbc:hsqldb:file:${gatein.db.data.dir}/data/jdbcjcr_${name} -#gatein.jcr.datasource.username=sa -#gatein.jcr.datasource.password=</programlisting> - <para> - Comment out the following lines in the IDM section: - </para> - <programlisting>#gatein.idm.datasource.driver=org.hsqldb.jdbcDriver -#gatein.idm.datasource.url=jdbc:hsqldb:file:${gatein.db.data.dir}/data/jdbcidm_${name} -#gatein.idm.datasource.username=sa -#gatein.idm.datasource.password=</programlisting> - <para> - Open the <filename>jcr-configuration.xml</filename> and <filename>idm-configuration.xml</filename> files and comment out references to the plug-in <literal>InitialContextInitializer</literal>. - </para> - <programlisting language="XML" role="XML">&lt;!-- Commented because, Datasources are declared and bound by AS, not in eXo --&gt; -&lt;!-- -&lt;external-component-plugins&gt; - [...] -&lt;/external-component-plugins&gt; ---&gt;</programlisting> - </section> - </section> - </section> - </chapter> + DOC NOTE: Could possibly be moved to a specific Tuning Guide later --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr/performance-tuning-guide.xml"/> + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="eXoJCR/jcr-with-gatein.xml"/> </part>