If true (default) clean out the modules directory created by the plugin each time we run the tests.
- Type: boolean
- Required: No
- Expression: ${jboss.modules.clean}
- Default: true
modulesDirectory:
The absolute path of the modules output directory created from moduleDefinitionFile
- Type: java.io.File
- Required: No
- Expression: ${jboss.modules.directory}
- Default: ${project.build.directory}/modules
logModule:
The name of the -logmodule parameter passed in to JBoss Modules (i.e. the name of the module containg the jboss logmanager). This is needed if the target project uses java.util.Logging or jboss logging, and the jboss log manager is not on the system classpath.
- Type: java.lang.String
- Required: No
- Expression: ${jboss.modules.logmodule}
logConfiguration:
The JBoss logging configuration if any. This must be set if the target project uses jboss logging and you want any output to be displayed
- Type: java.io.File
- Required: No
- Expression: ${logging.configuration}
moduleDefinitionFile:
The path of the module definition file.
- Type java.io.File
- Required: Yes
- Expression: ${jboss.modules.definition}
- Default: ${project.build.testOutputDirectory}/modules/module-def.xml
In addition, when using jboss logging you will need to set the following system properties in your pom when using this plugin (full example later):
<systemProperties>
<property>
<name>java.util.logging.manager</name>
<value>org.jboss.logmanager.LogManager</value>
</property>
<property>
<name>jboss.home.dir</name>
<value>${jboss.home}</value>
</property>
<property>
<name>org.jboss.boot.log.file</name>
<value>${jboss.home}/standalone/log/boot.log</value>
</property>
</systemProperties>
Module Definition File
This sets up the modules used for running your tests, which are then copied to modulesDirectory from the plugin settings. The plugin automatically sets up a module called jboss.surefire.module for you which contains the plugin classes. This module is then used as the module passed in to org.jboss.modules.Main. If you want to set up more modules you can define those in the moduleDefinitionFile. The schema is very simple, and rather than duplicating the work done by jboss-modules the validation of most of the stuff is delegated to jboss-modules when loading the modules. Here is an example:
<?xml version="1.0" encoding="UTF-8"?>
<modules xmlns="urn:jboss:surefire-module:1.0" targetNs="urn:jboss:module:1.0">
<test-module-resources>
<resource-root path="$junit:junit$"/>
<resource-root path="$$CLASSES$$"/>
<resource-root path="$$TEST.CLASSES$$"/>
</test-module-resources>
</test-module-dependencies>
<module name="org.jboss.as.standalone"/>
<module name="org.jboss.modules"/>
<module name="org.jboss.threads"/>
<module name="my.test.module"/>
</test-module-dependencies>
<module name="my.test.module">
<resources>
<resource-root path="$some.group:some-artifact$"/>
</resources>
</module>
</modules>
targetNs is the schema of the targetted jboss-modules version.
test-module-resources adds the listed resources directly into the resources section of the created jboss.surefire.module module.
test-module-dependencies adds the listed dependencies directly into the dependencies section of the created jboss.surefire.module module. In this case we follow the jboss-modules 1.0 schema. The resource root paths containing '$' get expanded as shown in this example of what the generated modulesDirectory/jboss/surefire/module/main/module.xml looks like:
<?xml version="1.0" encoding="UTF-8"?>
<module name="jboss.surefire.module" xmlns="urn:jboss:module:1.0">
<main-class name="org.apache.maven.surefire.booter.SurefireBooter"/>
<resources>
<!-- These two always get included -->
<resource-root path="surefire-api-2.6.jar"/>
<resource-root path="surefire-booter-1.0.0.Alpha1.jar"/>
<!-- The maven dependency $junit.junit$ gets pulled from the maven repository
using the version from your project dependencies
-->
<resource-root path="junit-4.8.1.jar"/>
<!-- $$CLASSES$$ uses the main classes directory from your project -->
<resource-root path="classes"/>
<!-- $$TEST.CLASSES$$ uses the test classes directory from your project -->
<resource-root path="test-classes"/>
</resources>
<dependencies>
<module name="org.jboss.as.standalone"/>
<module name="org.jboss.modules"/>
<module name="org.jboss.threads"/>
<module name="org.jboss.threads"/>
</dependencies>
</module>
You can have as many modules/module entries as you like and they just get copied across. The $some.group:some.artifact$ value gets resolved from your project's dependencies into the path to that dependency in your local maven repository. In this case (assuming your pom has a dependency on some.group:some-artifact:1.3.0, which then gets copied from the local maven repository to the module directory) modulesDirectory/my/test/module/main/module.xml looks like:
<?xml version="1.0" encoding="UTF-8"?>
<module name="my.test.module" xmlns="urn:jboss:module:1.0">
<resources>
<resource-root path="some-artifact-1.3.0.jar'/>
</resources>
</module>
To summarize, you have the following options to set the resource-root paths.
- Full path: Nothing special happens in this case, the module will simply point to that place
- $$CLASSES$$: Copies the main classes directory from your project to the created module
- $$TEST.CLASSES$$: Copies the test classes directory from your project to the created module
- $maven.group.id:maven.artifact.id$: Resolves the maven dependency from your project dependencies and copies the jar to the created module
Consuming the plugin from a pom
Normally you want to turn off the normal surefire plugin since that does not understand modular classloading
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-surefire-plugin</artifactId>
<version>2.6</version>
<!-- Disable the standard surefire plugin since that runs tests without modular classloading -->
<configuration>
<skipTests>true</skipTests>
</configuration>
</plugin>
Then enable and configure the jboss modules surefire plugin (${jboss.home} is configured elsewhere in the pom and points to a built JBoss AS 7 instance)
<plugin>
<groupId>org.jboss.maven.surefire.modular</groupId>
<artifactId>maven-surefire-plugin</artifactId>
<version>1.0.0.Alpha1</version>
<executions>
<execution>
<goals>
<goal>test</goal>
</goals>
</execution>
</executions>
<configuration>
<!-- standard surefire options -->
<redirectTestOutputToFile>true</redirectTestOutputToFile>
<enableAssertions>true</enableAssertions>
<systemProperties>
<property>
<!-- We need to enable the log manager for jboss as -->
<name>java.util.logging.manager</name>
<value>org.jboss.logmanager.LogManager</value>
</property>
<property>
<!-- The root of the jboss installation -->
<name>jboss.home.dir</name>
<value>${jboss.home}</value>
</property>
<property>
<!-- Set the boot log location -->
<name>org.jboss.boot.log.file</name>
<value>${jboss.home}/standalone/log/boot.log</value>
</property>
<!-- If using EmbeddedServerFactory to create the AS instance (used by the
arquillian container) set a directory to copy across the
${jboss.home}/standalone directory to, to avoid pollution of standalone.xml
between runs
-->
<property>
<name>jboss.embedded.root</name>
<value>target/temp-config</value>
</property>
</systemProperties>
<includes>
<include>org/jboss/as/test/surefire/**/*TestCase.java</include>
</includes>
<!-- Extra forked plugin options -->
<logModule>org.jboss.logmanager</logModule>
<logConfiguration>${jboss.home}/standalone/configuration/logging.properties</logConfiguration>
<roots>
<root>${jboss.home}/modules</root>
</roots>
</configuration>
</plugin>
Running Arquillian Tests
The plugin can be used to run arquillian tests against an embedded AS 7 instance using modular classloading everywhere at runtime.
If running an Arquillian IN_CONTAINER test, Arquillian will first execute parts of the test on the client side to create the deployments, before starting an embedded AS instance and deploying the tests into the started server. The test is then run in the server as part of the deployment.
If running an Arquillian AS_CLIENT test, Arquiilian will start the embedded AS instance and then run the test on the client to connect to the started AS instance.
Since the tests are now booted up using JBoss Modules, there is no runtime classpath to speak of, so you need to set up your modules to be able to see the arquillian classes and to be able to see the test class and the dependencies for what is executed on the client (the parts of the test run inside the server don't need anything special since that is handled for us by the server). Here is an example of a module definition file for running an Arquillian test:
<?xml version="1.0" encoding="UTF-8"?>
<modules xmlns="urn:jboss:surefire-module:1.0" targetNs="urn:jboss:module:1.0">
<test-module-resources>
<resource-root path="$org.jboss.as:jboss-as-arquillian-container-embedded$"/>
<resource-root path="$org.jboss.as:jboss-as-arquillian-container-common$"/>
<resource-root path="$$TEST.CLASSES$$"/>
</test-module-resources>
<test-module-dependencies>
<!-- Arquillian dependencies -->
<module services="import" name="org.jboss.surefire.arquillian-deps"/>
<!-- Add other test dependencies here -->
</test-module-dependencies>
<!-- Add more test modules as needed -->
</modules>
org.jboss.surefire.arquillian-deps is a module that ships with JBoss AS 7, and contains the dependencies needed for arquillian. It can be found here. In addition, the test module in this example contains the project test classes directories, and it adds the resource roots containing the JBoss AS 7 embedded Arquillian container and the common Arquillian container classes. Including these container classes makes Arquillian start up the embedded AS 7 container.
TBD
- Investigate if surefire report works with this or if that needs forking too