Struts Tools Tutorial

https://jira.jboss.org/jira/browse/JBDS-1104 - Updated versions,correcte= d master_output file

Modified: trunk/struts/docs/struts_tools_tutorial/en/master_output.xml =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D --- trunk/struts/docs/struts_tools_tutorial/en/master_output.xml 2010-02-17= 19:53:00 UTC (rev 20337) +++ trunk/struts/docs/struts_tools_tutorial/en/master_output.xml 2010-02-17= 19:56:55 UTC (rev 20338) @@ -22,1371 +22,1373 @@ = = -]> - = - - Struts Tools Tutorial - - - - - = - - - = - = - - AnatolyFedosik - OlgaChikvina - SvetlanaMukhina<= email>smukhina(a)exadel.com - = - April 2008 - - 2007 - 2009 - JBoss by Red Hat - - - Version: 3.1.0.CR1 - - - - - - PDF version - - - - - = - = - = - = - = - - - - - JBoss Tools - Eclipse - Java - JBoss - - - Introduction - The following chapters describe how to deal with classic/old style= of Struts development. We - recommend users to use JBoss Seam to - simplify development, but until then you can read about classical Stru= ts usage here. - - We are going to show you how to create a simple - Struts application - using the JBoss Tools. The completed application will ask = a user to enter - a name and click a button. The resulting new page will display the fam= iliar message, - "Hello <name>!" - This document will show you how to create such an application from= the beginning, along the - way demonstrating some of the powerful features of JBoss Tools. With t= he help of our tutorial you will design the - application, generate stub code for the application, fill in the stub = coding, compile the - application, and finally run it all from inside the Eclipse. - = -

- Key Features Struts Tools - = - For a start, we propose you to look through the table of main fe= atures of Struts - Tools: - - = - Key Functionality of Struts Tools - - = - - - = - = - - - Feature - Benefit - = - - - - - Struts Support - Step-by-step wizards for creating a new struts pr= oject with a number - of predefined templates, importing existing ones and adding = struts - capabilities to non-struts web projects. - = - - = - - Support for Struts Configuration File - Working on file using three modes: diagram, tree = and source. - Synchronization between the modes and full control over the = code. Easy - moving around the diagram using the Diagram Navigator. Worki= ng with - struts projects that have multiple modules. Possibility to u= se Struts - configuration file debugger allowing to set break points on = struts - diagram and then launch the server in debug mode. - = - - = - - Support for Struts modules - A Struts module (struts-config.xml) is automatica= lly created while - creating a new project. There is also possibility to add new= ones or edit - already existing modules in your existing project or while i= mporting Struts project. - = - - = - - Verification and Validation - All occurring errors will be immediately reported= by verification - feature, no matter in what view you are working. Constant va= lidation and - errors checking allows to catch many of the errors during de= velopment - process that significantly reduces development time.<= /entry> - = - = - - - -

- = - = - = -

- Other relevant resources on the topic - = - All JBoss Developer Studio/JBoss Tools release documentation you= can find athttp://docs.jboss.o= rg/tools in the corresponding release directory. - The latest documentation builds are available at http://download.jboss.or= g/jbosstools/nightly-docs. - = -

- = - - - = - - - - - JBoss Tools - Struts - Struts Application - - - = - Creating a Simple Struts Application - = - Firstly, we assume that you have already launched Eclipse with <= property moreinfo=3D"none">JBoss Tools installed and - also that the Web Development perspect= ive is the current perspective. (If not, make it - active by selecting - Window > Open Perspective > = Other > Web - Development - from the menu bar.) - = -

- Starting Up - We are first going to create a new project for the applicati= on. - - - Go to the menu bar and select - File > New > Struts = Project - - - - Next enter "StrutsHello" as the project name - - - Leave everything else as it is, and click - Next - - - - If you have server runtime already defined, just pas= s to next point. Otherwise in the - Runtime section click the - New button and target at needed server runtime environment. Click - Finish.= - - - Click - Next - - - - Make sure that - struts-bean.tld - , - struts-html.tld - , and - struts-logic.tld - are checked in the list of included tag librar= ies and then hit - Finish - - - - A "StrutsHello" node should appear in the Package - Explorer view. - - - Click the plus sign next to - StrutsHello - to reveal the child nodes - - - Click the plus sign next to - WebContent - under - StrutsHello - - - Click the plus sign next to - WEB-INF - under - WebContent - - - Then, double-click on the - struts-config.xml - node to display a diagram of the Struts applic= ation configuration - file in the editing area - - - At this point, its empty except for the background grid line= s. -

- = -

- - Creating the Application Components - Now, we will design the application by creating the individu= al components as - placeholders first. (We don't have to complete all of the deta= ils inside the components - until afterwards.) -

- Creating JSP Page Placeholders - Next, let's create and place two JSP pages. We will not = write any code - for the files, but only create them as placeholders so tha= t we can create links to - them in the diagram. We will write the code a little bit l= ater. -

- Creating the Page Placeholders - - - Bring the Web Pr= ojects view to the front of the Pack= age Explorer view - by selecting the - Web Projects - tab next to that tab. - - - Right-click the - StrutsHello &g= t; WEB-ROOT (WebContent) - folder in the Web Projects view and select - New > Folde= r... - - - - Enter - pages - for a folder name and click - Finish - - - - - We will keep our presentation files in this = folder - - - - Right-click the - pages folder and select - New > File = > JSP... - - - - - For Name type in - inputname - (the JSP extension will be automat= ically added to the file), - for Template select - StrutsForm - and then click on the - Finish - button - - - Right-click the - pages folder again and select - New > File = > JSP... - - - - For Name type in - greeting - , for Template leave as - Blank,<= /emphasis> and then click on the - Finish - button - - - Just leave these files as is for now. -

- Placing the Page Placeholders - Lets now place the two pages just created on the dia= gram. - - - Click on the - struts-config.= xml - tab in the editing area to bring t= he diagram to the - front - - - Click on the - inputname.jsp<= /property> - page in the Web Projects view, drag it onto the diagram, and - drop it - - Click on the - greeting.jsp - page in the Web Projects view, drag it onto the diagram, and - drop it to the right of the - /pages/inputname.j= sp - icon with some extra space - - You should now have two JSP pages in the diagram. -

- Creating an Action Mappings - Using a context menu on the diagram, we are next going t= o create an Action - mapping. - - - Right-click between the two icons and select - New > Action - - - - Enter the following values: - - - - Action values - - - - path - /greeting - - - name - GetNameForm - - - scope - request - - - type - sample.GreetingAction - - - validate - <leave blank> - - - -

- ("GetNameForm" is the name for a form bean that we will = create - later.) - - - Click - Finish - - - - - The - /greeting - action should appear in four places, in the di= agram, under the - - action-mappings= node, under the - struts-config.xml node in Tree view, in Web Pro= jects - view and in the Out= line view. Also, note the asterisk to the right of the name, - - struts-config.xml, in the Outline view s= howing that the file has been changed, but - not saved to disk. -

- Creating a Link - Let's now create a link from the - inputname.jsp page to the action. - - - On the left-hand side of the diagram in the colu= mn of icons, click on the Create New Connection - icon( = - - - - ). - - - - - In the connect-the-components mode you are in no= w, click on the - /pages/inputname.j= sp - icon in the diagram and then click on = the - /greeting - action - - - A link will be created from the page to the action. -

- Creating a Forward - Next, we are going to create a forward for the action. - - - On the left-hand side of the diagram in the colu= mn of icons, click on = - the Create New Connection - icon( = - - - - ), again. - - - = - - - Click on the - /greeting - action icon in the diagram and then cl= ick on the - pages/greeting.jsp= - icon - - - That's it. A link will be drawn from the actions= new greeting - forward to the - greeting.jsp JSP page. Note that the forwards name will be - set based on the name of the target JSP file name.= If you don't - like it, you can easily change it - - - Select the - Tree - tab at the bottom of the editor window= (between Diagram and - Source) - - - Expand the - struts-config.xml/= action-mappings/ /greeting - node and then select the greeting forw= ard - - - In the Properties Editor to the right, change th= e text to - "sayHello" in the - Name field - - - Select the - Diagram - tab at the bottom of the editor window= and see how the diagram - is also updated to reflect the change - - -

- Creating a Global Forward - One last component that we need to create in the diagram= is a global forward. - - - Somewhere in the top-left corner of diagram, rig= ht-click and select - New > Global Fo= rward - - - - Enter - getName - in the - Name field - - - Select the - Change... - button for Path - - - In the Edit Path window, switch to the - Pages - tab - - - Expand the - StrutsHello > W= EB-ROOT (WebContent) > pages - node and then select the inputname.jsp= page - - - Click - Ok - . - - - Leave the rest of the fields blank and click - OK - - - - A forward object now appears on the diagram and also in = the global-forwards folder - in the Outline view. - - - Tidy up the diagram, by clicking and dragging ar= ound each icon, so that - the diagram looks something like this: - - -

- Diagram View - - - - - - -

- Creating a Form Bean - One last thing that we need to do is to create a form be= an. - - - Switch to the Tree viewer in the editor for the = - struts-config.xml file, by - selecting the - Tree - tab at the bottom of the editor window= - - - Right-click - struts-config.xml = > form-beans - and select Create Form Bean - - - Enter - GetNameForm - in the name field and - sample.GetNameForm= - for type - - - Click - Finish - - - - To save your changes to struts-config.xml, selec= t - File > Save - from the menu bar - - - Note the disappearance of the asterisk next to the name,= - struts-config.xml.<= /emphasis> -

- - = - - - - - JBoss Tools - Struts - Struts Application - - - = - Generating Stub Coding - We are done with designing the application through the diagr= am. Now we need to write - code for the action component. We also need to write an action= class for the - /greeting - mapping along with a FormBean. To aid in the codin= g phase, JBoss Developer - Studio can generate Java class stubs for all of the components= shown in the diagram. - - - Switch back to the diagram, by selecting the - Diagram - tab at the bottom of the editor window - - - Right-click a blank space in the diagram and select = - Generate Java Code - - - - Leave everything as is in the dialog box and click <= emphasis> - Generate - - - - You should see a screen that says: - Generated classes: 2 - Actions: 1 - Form beans: 1 - - - Click - Finish - - - - The Java files will be generated in a - JavaSource > sample - folder that you can see in the Package Explorer view under the - "StrutsHello" node. One Action stub and one FormBean stub will= have - been generated. - - = - - - - - JBoss Tools - Struts - Struts Application - - - - Coding the Various Files - We will now code both the Java stub classes just generated, = the JSP files left in as - placeholders from previous steps, and a new start JSP page we = will have to create. -

- Java Stub Classes - - - To finish the two Java classes, switch to the - Package Explorer - view and expand the - JavaSource > sa= mple - folder - - -

- GetNameForm.java - - - Double-click - GetNameForm.ja= va - for editing - - - - You are looking at a Java stub class that wa= s generated by JBoss - Tools. Now we are going to edit the file - - - - Add the following attributes at the beginnin= g of the class: - - - - - - - Inside the reset method, delete the TO DO an= d throw lines and - add: - - - - - - - Inside the validate method, delete the TO DO= and throw lines and - add: - - - - - - - Right-click and select - Source > Ge= nerate Getters and Setters - from the context menu - - - In the dialog box, check the check box for <= emphasis> - name, - select First method for Insertion point, and c= lick on the - OK - button - - - The final - GetNameForm.java file should look like this: - - - - - Save the file - - -

- GreetingAction.java - - - Open - GreetingAction.jav= a for editing - - - Inside the execute method, delete the TO DO = lines and add the - following: - - - - - - The final version of - GreetingAction.java should look like this: - - - - - Save the file - - - Close the editors for the two Java files - - - The last thing left to do is to code the JSP files w= hose editors should still - be open from having been created as placeholders. -

- JSP Pages -

- inputname.jsp - In this page, the user will enter any name and click= the - submit - button. Then, the greeting action will be = called through the form. - - - Click on the - inputname.jsp<= /property> - tab in the Editing area to bring i= ts editor forward - - - In the Web Projects view, expand - StrutsHello &g= t; Configuration > default - > struts-config.xml > action-map= pings - and select - /greeting - - - - Drag it and drop it between the quotes for t= he - "action" - attribute to the = - <html:form> - element in the Source pane of the editor - - - Then type this text on a new line just below= this line: - - - - - Select the - Visual - pane of the editor - - - Then, in the JBoss Tools Palette, expand the= - Struts Form - library, select - text - , and drag it onto the box - - Note: - By default there are only four group= s on the JBoss Tools - Palette. If you wish to make some grou= p visible click the - Show/H= ide - button on the top of palet= te and in the prompted - dialog check the group (or groups) you= want to be shown. - - - - -

- JBoss Tools Palette - - - - - - - - - In the Insert Tag dialog box, type in name f= or property and select - Finish - - - - In the StrutsForm library in the JBoss Tools Palette, select - submit - , and drag it to right after the te= xt box in the Visual pane - of the editor - - - Right-click the - submit - button and select = - <html:submit> - Attributes from the context menu - - - In the Attributes dialog box, select the - value - field and type in "Say Hello!" for= its - value - - - After tidying the page source, the Editor window for= the file should look - something like this: -

- Editor Window - - - - - - -

- greeting.jsp - Next, we will fill in the result page. - - - Click on the - greeting.jsp - tab in the Editing area to bring i= ts editor forward - - - Type in the following code: - - - - - Greeting - - -

- - -]]> - - To complete editing of this file, we will use macros= from the JBoss Tools - Palette. This palette is a view that should= be available to the right of the - editing area. - - - Click on the - Struts Common<= /property> - folder in the JBoss Tools Palette to open it - - - Position the cursor at the beginning of the = - greeting.jsp file in the - Source pane and then click on - bean taglib in the JBoss Tools - Palette - - - This will insert the following line at the top of th= e file: - -]]> - - - Click on the - Struts Bean - folder in the JBoss Tools Palette to open it - - - Position the cursor inside the = - <p> - element - - - Click on - write in the JBoss Tools Palette= - - - Type in "GetNameForm" for the - name - attribute and add a - property - attribute with "name" as its - value - - - The editor should now look like this: -

- Editor Window - - - - - - -

- index.jsp - Finally, we will need to create and edit an - index.jsp page. This page will use - a Struts forward to simply redirect us to the getName = global forward. - - - In the Web Projects view, right-click on - StrutsHello &g= t; WEB-ROOT(WebContent) - node and select - New > File = > JSP - - - - Type - index for Name and click on the - Finish - button - - - On the JBoss Too= ls Palette, select the - Struts Common<= /property> - folder of macros by clicking on it= in the palette - - - Click on the - logic taglib icon - - - Press the - Enter - key in the editor to go to the nex= t line - - - Back on the palette, select the - Struts Logic - folder of macros - - - Click on - redirect - - - Delete the ending tag, put a forward slash i= n front of the closing - angle bracket, and type "forward=3DgetName" in= front of - the slash - - - The finished code for the page is shown below: - - -]]> - - - To save all the edits to files, select - File>Save A= ll - from the menu bar - - -

- - = - - - - - JBoss Tools - Struts - Struts Application - - - = - Compiling the Classes and Running the Application - = - As this is the Eclipse environment, no explicit compilation = step is required. By - default, Eclipse compiles as you go. - - Thus at this point everything is ready for running our appli= cation without having to leave JBoss - Developer Studio by using the JBoss Application Server engine = that comes with the JBoss - Developer Studio. For controlling JBoss AS within JBoss Develo= per Studio, there is JBoss - Server view. -

- JBoss Server Panel - - - - - - - - - Start up JBoss AS by clicking on the icon in JBoss S= erver view. (If JBoss AS - is already running, stop it by clicking on the red ico= n and then start it again. - Remember, the Struts run-time requires restarting the = servlet engine when any - changes have been made.) - - - After the messages in the Console tabbed view stop s= crolling, JBoss AS is - available. At this point, right-click on the getName g= lobal forward in the - struts-config.xml diagram view and select Run on Serve= r. - - - The browser should appear with the application started. - - = - - - - - JBoss Developer Studio - Struts - Struts Validation - - -Struts Validation Examples - -Validation of input is an imp= ortant part of any Web application. All Apache Jakarta frameworks, = -including Struts, can use a common Jakarta Validation Framework for stream= lining this aspect of Web = -application development. The Validation Framework allows you to define val= idation rules and then apply these rules on the client-side or the server-s= ide. - - JBoss Developer Studio makes using the Validation Framework in Struts even easier with the help of a= specialized editor for the XML files that controls validation in a project= . In this document, we'll show you how this all works by creating some simp= le client-side validation and server-side validation examples. - -

- -Starting Point -The example assumes that you have already created our sample "Struts= Hello" application from the = -Getting Started Guide for Creating a Struts Application. You should have t= he JBoss Developer Studio perspective - open on this StrutsHello project. -

- -

- -Defining the Validation Rule -In these steps you will set up the validation that can be used for e= ither client-side or = -server side validation. You need to enable validation as a part of the pro= ject, define an error message, and tie it into an appropriate part of the a= pplication. - - -Right-click on a "plug-ins" node under the StrutsHello > Configuration > default > str= uts-config.xml node in the Web Projects view and sele= ct Create Special Plugin > Validat= ors from the context menu -Further down in the Web Projects view, right-click on the = -StrutsHello > ResourceBundles node and select N= ew > Properties File...from the context menu -In the dialog box, click on the Browse...button next to the Folder field,= expand the - JavaSource folder in this next dialog box, select the sample subfolder= , and click on the OK button - Back in the first dialog box, type in "applResources" = for the Name field and click on the F= inish button -Right-click on a newly created file and select <= property moreinfo=3D"none">Add > Default Error Messages - from the context menu - -Drag up the sample.applResources icon until you can drop i= t on the resources folder under struts-config.xml -Select File > Sav= e All from the menu bar -Select validation.xml under the StrutsHello > Validation node and doub= le-click it to open it with the JBoss Tools XML Editor -Here you must create a Formset. -In the validation.xml file editor click the button Create Formset on the = panel Formsets<= /para> -In the dialog Add Fo= rmset fill the fields Language and Country or just leave them empty to create a def= ault formset. Click OK - -

- Create Formset - = - - - - - - -Expand the "form-beans" node under the StrutsHello > Configuration > default > struts-= config.xml node. Then, drag the form bean "GetNameFor= m" and drop it onto a formset in the XML Editor -In the Validation Editor, expand the formset node, right-c= lick GetNameForm, and select Create F= ield... from the context menu -Enter a name for Property in the dialog box. A new propert= y will be created: - -

- New Property Is Added - = - - - - - - -In the Properties view for the name field to the right of = the "tree" for the validation.xml file, click on the Change...button next to the Depends e= ntry field -In the displayed double list, select required from the left list and then= click Add - Click Ok -Right-click name and select Add Arg... from the context menu -In the Add Arg dialog box, click on the Change...button next to the Key field - In the Key dialog box that appears now, click on the <= emphasis>Add button - Enter "name.required" in the Name field, and enter a p= erson's name in the Value field - Click Finish, then Ok, and then Ok<= /emphasis> again -Select File > Sav= e All from the menu bar - -

- -

- -Client-Side Validation -Client-side validation uses a= scripting language (like JavaScript) running in the client browser to actu= ally do the validation. In a Struts = application using the Validation Fra= mework, however, you don't actually have to do any of the script coding. Th= e Validation Framework handles this.= -To see how this works in our application, you'll just need to make a= couple of modifications to one of the JSP files. - -Double-click inputname.jsp under StrutsHello > WEB-ROOT(WebContent) > pages to open it for editing -Find the tag near the top and hit Return to make a new li= ne under it - In the JBoss Tools Palette view to the right, open the= Struts HTML folder and click on the javascript tag -Back in the editor, just in front of the closing slash for= this inserted tag, hit Ctrl+Space and select "formName" from the prompting= menu -Over in the Web Projects view, select GetNameForm under th= e StrutsHello > Configuration >= default > struts-config.xml > form-beans node,= drag it, and drop it between the quotes in the editor -Modify the <html:form> tag by inserting= this attribute: - - - -The file should now look like this: - - - - - - - - - - Input name: - - - -]]> - -Select File > Sav= e from the menu bar -Start JBoss Application Server by clicking on its icon (a = right-pointing arrow) in the toolbar - Click the Run icon( - - ) or right click your project folder= and select Run As > Run on Server= - - -In the browser window, click on the "Say Hel= lo!" button without having entered any name in the form -A JavaScript error message should be displayed in an alert box. -

- -Server Side Validation -Server side validation does the validation inside the application on= the server. In a Struts application using the Validation Framework, you st= ill don't have to do any of the actual validation coding. The Validation Fr= amework handles this. You will though have to make a few changes to the JSP= file you modified for client-side validation along with a change to an act= ion and a few changes to the form bean class. -

- -

- -Editing the JSP File - -Reopen inputname.jsp for editing -Delete the "onsubmit" attribute in the

<html:for=
m>

element that you put in for client-side validation - -Add an <html:errors/> tag after the = - <html:form> - tag - -The JSP file should now look like this: - - - - - - - - - Input name: - - - - - -]]> - -

- -

- -Editing the Action - -In the Web Projects view, expand the node under the StrutsHello > Configuration > default= > struts-config.xml > action-mappings node, ri= ght-click the /greeting action, and then select Prop= erties...from the context menu - - In the Edit Properties window, insert the cursor into = the value column for the input property and click on the ... button - - In the dialog box, make sure the Pages tab is selected= , select StrutsHello > WEB-ROOT(We= bContent) > pages > inputname.jsp, click the Ok button, and th= en click on the Close button - -

- - -Editing the Form Bean - -Right-click the /gre= eting action again and select Open Form-bean Source t= o open the GetNameForm.java file for editing -Change the class that it extends from: org.apache.struts.action.ActionForm to org.apache.struts.validator.Vali= datorForm -Comment out a validate method - -The file should now look like this: - - - -Select File > Sav= e All from the menu bar -Reload the application into JBoss AS by clicking on the "C= hange Time Stamp" icon (a finger pointing with a little star) in the toolba= r -Run the application -In the browser window, click on the "Say Hello!" button wi= thout having entered any name in the form - -The error message should appear in a refreshed version of the form.<= /para> -

- - - = - - - - - JBoss Tools - Struts - Struts Application - - - - Other Relevant Resources on the topic - - Our reference: Struts Tools Reference Guide - Apache Struts: Struts T= echnology - Struts 2: Apache St= ruts 2 - Get Started: Struts Getting - Started - Struts on IBM: Struts - - An open-source MVC implementation - FAQ: = Struts FAQ - Download: Release of Apache - Struts - - Thus, this tutorial should help you to execute the hole developm= ent circle for building a - sample Struts-based Web application using JBoss Tools bundle of Eclipse - plugins starting from organizing a new Struts project and ending w= ith the running and - deploying it onto the JBoss Server. - - To find out all the features of JBos= s Tools for working with Struts - refer to our Struts Tools Reference Guide. If you - still have questions you are always welcome on JBoss - Tools Forum. - - - = - = - +]> + = + + Struts Tools Tutorial + + + + + = + + + = + = + + AnatolyFedosik + OlgaChikvina + SvetlanaMukhina<= email>smukhina(a)exadel.com + = + + 2007 + 2008 + 2009 + 2010 + JBoss by Red Hat + + + Version: 3.1.0.CR2 + + + + + + PDF version + + + + + = + = + = + = + = + + + + + JBoss Tools + Eclipse + Java + JBoss + + + Introduction + The following chapters describe how to deal with classic/old style= of Struts development. We + recommend users to use JBoss Seam to + simplify development, but until then you can read about classical Stru= ts usage here. + + We are going to show you how to create a simple + Struts application + using the JBoss Tools. The completed application will ask = a user to enter + a name and click a button. The resulting new page will display the fam= iliar message, + "Hello <name>!" + This document will show you how to create such an application from= the beginning, along the + way demonstrating some of the powerful features of JBoss Tools. With t= he help of our tutorial you will design the + application, generate stub code for the application, fill in the stub = coding, compile the + application, and finally run it all from inside the Eclipse. + = +

+ Key Features Struts Tools + = + For a start, we propose you to look through the table of main fe= atures of Struts + Tools: + + = + Key Functionality of Struts Tools + + = + + + = + = + + + Feature + Benefit + = + + + + + Struts Support + Step-by-step wizards for creating a new struts pr= oject with a number + of predefined templates, importing existing ones and adding = struts + capabilities to non-struts web projects. + = + + = + + Support for Struts Configuration File + Working on file using three modes: diagram, tree = and source. + Synchronization between the modes and full control over the = code. Easy + moving around the diagram using the Diagram Navigator. Worki= ng with + struts projects that have multiple modules. Possibility to u= se Struts + configuration file debugger allowing to set break points on = struts + diagram and then launch the server in debug mode. + = + + = + + Support for Struts modules + A Struts module (struts-config.xml) is automatica= lly created while + creating a new project. There is also possibility to add new= ones or edit + already existing modules in your existing project or while i= mporting Struts project. + = + + = + + Verification and Validation + All occurring errors will be immediately reported= by verification + feature, no matter in what view you are working. Constant va= lidation and + errors checking allows to catch many of the errors during de= velopment + process that significantly reduces development time.<= /entry> + = + = + + + +

+ = + = + = +

+ Other relevant resources on the topic + = + All JBoss Developer Studio/JBoss Tools release documentation you= can find athttp://docs.jboss.o= rg/tools in the corresponding release directory. + The latest documentation builds are available at http://download.jboss.or= g/jbosstools/nightly-docs. + = +

+ = + + + = + + + + + JBoss Tools + Struts + Struts Application + + + = + Creating a Simple Struts Application + = + Firstly, we assume that you have already launched Eclipse with <= property moreinfo=3D"none">JBoss Tools installed and + also that the Web Development perspect= ive is the current perspective. (If not, make it + active by selecting + Window > Open Perspective > = Other > Web + Development + from the menu bar.) + = +

+ Starting Up + We are first going to create a new project for the applicati= on. + + + Go to the menu bar and select + File > New > Struts = Project + + + + Next enter "StrutsHello" as the project name + + + Leave everything else as it is, and click + Next + + + + If you have server runtime already defined, just pas= s to next point. Otherwise in the + Runtime section click the + New button and target at needed server runtime environment. Click + Finish.= + + + Click + Next + + + + Make sure that + struts-bean.tld + , + struts-html.tld + , and + struts-logic.tld + are checked in the list of included tag librar= ies and then hit + Finish + + + + A "StrutsHello" node should appear in the Package + Explorer view. + + + Click the plus sign next to + StrutsHello + to reveal the child nodes + + + Click the plus sign next to + WebContent + under + StrutsHello + + + Click the plus sign next to + WEB-INF + under + WebContent + + + Then, double-click on the + struts-config.xml + node to display a diagram of the Struts applic= ation configuration + file in the editing area + + + At this point, its empty except for the background grid line= s. +

+ = +

+ + Creating the Application Components + Now, we will design the application by creating the individu= al components as + placeholders first. (We don't have to complete all of the deta= ils inside the components + until afterwards.) +

+ Creating JSP Page Placeholders + Next, let's create and place two JSP pages. We will not = write any code + for the files, but only create them as placeholders so tha= t we can create links to + them in the diagram. We will write the code a little bit l= ater. +

+ Creating the Page Placeholders + + + Bring the Web Pr= ojects view to the front of the Pack= age Explorer view + by selecting the + Web Projects + tab next to that tab. + + + Right-click the + StrutsHello &g= t; WEB-ROOT (WebContent) + folder in the Web Projects view and select + New > Folde= r... + + + + Enter + pages + for a folder name and click + Finish + + + + + We will keep our presentation files in this = folder + + + + Right-click the + pages folder and select + New > File = > JSP... + + + + + For Name type in + inputname + (the JSP extension will be automat= ically added to the file), + for Template select + StrutsForm + and then click on the + Finish + button + + + Right-click the + pages folder again and select + New > File = > JSP... + + + + For Name type in + greeting + , for Template leave as + Blank,<= /emphasis> and then click on the + Finish + button + + + Just leave these files as is for now. +

+ Placing the Page Placeholders + Lets now place the two pages just created on the dia= gram. + + + Click on the + struts-config.= xml + tab in the editing area to bring t= he diagram to the + front + + + Click on the + inputname.jsp<= /property> + page in the Web Projects view, drag it onto the diagram, and + drop it + + Click on the + greeting.jsp + page in the Web Projects view, drag it onto the diagram, and + drop it to the right of the + /pages/inputname.j= sp + icon with some extra space + + You should now have two JSP pages in the diagram. +

+ Creating an Action Mappings + Using a context menu on the diagram, we are next going t= o create an Action + mapping. + + + Right-click between the two icons and select + New > Action + + + + Enter the following values: + + + + Action values + + + + path + /greeting + + + name + GetNameForm + + + scope + request + + + type + sample.GreetingAction + + + validate + <leave blank> + + + +

+ ("GetNameForm" is the name for a form bean that we will = create + later.) + + + Click + Finish + + + + + The + /greeting + action should appear in four places, in the di= agram, under the + + action-mappings= node, under the + struts-config.xml node in Tree view, in Web Pro= jects + view and in the Out= line view. Also, note the asterisk to the right of the name, + + struts-config.xml, in the Outline view s= howing that the file has been changed, but + not saved to disk. +

+ Creating a Link + Let's now create a link from the + inputname.jsp page to the action. + + + On the left-hand side of the diagram in the colu= mn of icons, click on the Create New Connection + icon( = + + + + ). + + + + + In the connect-the-components mode you are in no= w, click on the + /pages/inputname.j= sp + icon in the diagram and then click on = the + /greeting + action + + + A link will be created from the page to the action. +

+ Creating a Forward + Next, we are going to create a forward for the action. + + + On the left-hand side of the diagram in the colu= mn of icons, click on = + the Create New Connection + icon( = + + + + ), again. + + + = + + + Click on the + /greeting + action icon in the diagram and then cl= ick on the + pages/greeting.jsp= + icon + + + That's it. A link will be drawn from the actions= new greeting + forward to the + greeting.jsp JSP page. Note that the forwards name will be + set based on the name of the target JSP file name.= If you don't + like it, you can easily change it + + + Select the + Tree + tab at the bottom of the editor window= (between Diagram and + Source) + + + Expand the + struts-config.xml/= action-mappings/ /greeting + node and then select the greeting forw= ard + + + In the Properties Editor to the right, change th= e text to + "sayHello" in the + Name field + + + Select the + Diagram + tab at the bottom of the editor window= and see how the diagram + is also updated to reflect the change + + +

+ Creating a Global Forward + One last component that we need to create in the diagram= is a global forward. + + + Somewhere in the top-left corner of diagram, rig= ht-click and select + New > Global Fo= rward + + + + Enter + getName + in the + Name field + + + Select the + Change... + button for Path + + + In the Edit Path window, switch to the + Pages + tab + + + Expand the + StrutsHello > W= EB-ROOT (WebContent) > pages + node and then select the inputname.jsp= page + + + Click + Ok + . + + + Leave the rest of the fields blank and click + OK + + + + A forward object now appears on the diagram and also in = the global-forwards folder + in the Outline view. + + + Tidy up the diagram, by clicking and dragging ar= ound each icon, so that + the diagram looks something like this: + + +

+ Diagram View + + + + + + +

+ Creating a Form Bean + One last thing that we need to do is to create a form be= an. + + + Switch to the Tree viewer in the editor for the = + struts-config.xml file, by + selecting the + Tree + tab at the bottom of the editor window= + + + Right-click + struts-config.xml = > form-beans + and select Create Form Bean + + + Enter + GetNameForm + in the name field and + sample.GetNameForm= + for type + + + Click + Finish + + + + To save your changes to struts-config.xml, selec= t + File > Save + from the menu bar + + + Note the disappearance of the asterisk next to the name,= + struts-config.xml.<= /emphasis> +

+ + = + + + + + JBoss Tools + Struts + Struts Application + + + = + Generating Stub Coding + We are done with designing the application through the diagr= am. Now we need to write + code for the action component. We also need to write an action= class for the + /greeting + mapping along with a FormBean. To aid in the codin= g phase, JBoss Developer + Studio can generate Java class stubs for all of the components= shown in the diagram. + + + Switch back to the diagram, by selecting the + Diagram + tab at the bottom of the editor window + + + Right-click a blank space in the diagram and select = + Generate Java Code + + + + Leave everything as is in the dialog box and click <= emphasis> + Generate + + + + You should see a screen that says: + Generated classes: 2 + Actions: 1 + Form beans: 1 + + + Click + Finish + + + + The Java files will be generated in a + JavaSource > sample + folder that you can see in the Package Explorer view under the + "StrutsHello" node. One Action stub and one FormBean stub will= have + been generated. + + = + + + + + JBoss Tools + Struts + Struts Application + + + + Coding the Various Files + We will now code both the Java stub classes just generated, = the JSP files left in as + placeholders from previous steps, and a new start JSP page we = will have to create. +

+ Java Stub Classes + + + To finish the two Java classes, switch to the + Package Explorer + view and expand the + JavaSource > sa= mple + folder + + +

+ GetNameForm.java + + + Double-click + GetNameForm.ja= va + for editing + + + + You are looking at a Java stub class that wa= s generated by JBoss + Tools. Now we are going to edit the file + + + + Add the following attributes at the beginnin= g of the class: + + + + + + + Inside the reset method, delete the TO DO an= d throw lines and + add: + + + + + + + Inside the validate method, delete the TO DO= and throw lines and + add: + + + + + + + Right-click and select + Source > Ge= nerate Getters and Setters + from the context menu + + + In the dialog box, check the check box for <= emphasis> + name, + select First method for Insertion point, and c= lick on the + OK + button + + + The final + GetNameForm.java file should look like this: + + + + + Save the file + + +

+ GreetingAction.java + + + Open + GreetingAction.jav= a for editing + + + Inside the execute method, delete the TO DO = lines and add the + following: + + + + + + The final version of + GreetingAction.java should look like this: + + + + + Save the file + + + Close the editors for the two Java files + + + The last thing left to do is to code the JSP files w= hose editors should still + be open from having been created as placeholders. +

+ JSP Pages +

+ inputname.jsp + In this page, the user will enter any name and click= the + submit + button. Then, the greeting action will be = called through the form. + + + Click on the + inputname.jsp<= /property> + tab in the Editing area to bring i= ts editor forward + + + In the Web Projects view, expand + StrutsHello &g= t; Configuration > default + > struts-config.xml > action-map= pings + and select + /greeting + + + + Drag it and drop it between the quotes for t= he + "action" + attribute to the = + <html:form> + element in the Source pane of the editor + + + Then type this text on a new line just below= this line: + + + + + Select the + Visual + pane of the editor + + + Then, in the JBoss Tools Palette, expand the= + Struts Form + library, select + text + , and drag it onto the box + + Note: + By default there are only four group= s on the JBoss Tools + Palette. If you wish to make some grou= p visible click the + Show/H= ide + button on the top of palet= te and in the prompted + dialog check the group (or groups) you= want to be shown. + + + + +

+ JBoss Tools Palette + + + + + + + + + In the Insert Tag dialog box, type in name f= or property and select + Finish + + + + In the StrutsForm library in the JBoss Tools Palette, select + submit + , and drag it to right after the te= xt box in the Visual pane + of the editor + + + Right-click the + submit + button and select = + <html:submit> + Attributes from the context menu + + + In the Attributes dialog box, select the + value + field and type in "Say Hello!" for= its + value + + + After tidying the page source, the Editor window for= the file should look + something like this: +

+ Editor Window + + + + + + +

+ greeting.jsp + Next, we will fill in the result page. + + + Click on the + greeting.jsp + tab in the Editing area to bring i= ts editor forward + + + Type in the following code: + + + + + Greeting + + +

+ + +]]> + + To complete editing of this file, we will use macros= from the JBoss Tools + Palette. This palette is a view that should= be available to the right of the + editing area. + + + Click on the + Struts Common<= /property> + folder in the JBoss Tools Palette to open it + + + Position the cursor at the beginning of the = + greeting.jsp file in the + Source pane and then click on + bean taglib in the JBoss Tools + Palette + + + This will insert the following line at the top of th= e file: + +]]> + + + Click on the + Struts Bean + folder in the JBoss Tools Palette to open it + + + Position the cursor inside the = + <p> + element + + + Click on + write in the JBoss Tools Palette= + + + Type in "GetNameForm" for the + name + attribute and add a + property + attribute with "name" as its + value + + + The editor should now look like this: +

+ Editor Window + + + + + + +

+ index.jsp + Finally, we will need to create and edit an + index.jsp page. This page will use + a Struts forward to simply redirect us to the getName = global forward. + + + In the Web Projects view, right-click on + StrutsHello &g= t; WEB-ROOT(WebContent) + node and select + New > File = > JSP + + + + Type + index for Name and click on the + Finish + button + + + On the JBoss Too= ls Palette, select the + Struts Common<= /property> + folder of macros by clicking on it= in the palette + + + Click on the + logic taglib icon + + + Press the + Enter + key in the editor to go to the nex= t line + + + Back on the palette, select the + Struts Logic + folder of macros + + + Click on + redirect + + + Delete the ending tag, put a forward slash i= n front of the closing + angle bracket, and type "forward=3DgetName" in= front of + the slash + + + The finished code for the page is shown below: + + +]]> + + + To save all the edits to files, select + File>Save A= ll + from the menu bar + + +

+ + = + + + + + JBoss Tools + Struts + Struts Application + + + = + Compiling the Classes and Running the Application + = + As this is the Eclipse environment, no explicit compilation = step is required. By + default, Eclipse compiles as you go. + + Thus at this point everything is ready for running our appli= cation without having to leave JBoss + Developer Studio by using the JBoss Application Server engine = that comes with the JBoss + Developer Studio. For controlling JBoss AS within JBoss Develo= per Studio, there is JBoss + Server view. +

+ JBoss Server Panel + + + + + + + + + Start up JBoss AS by clicking on the icon in JBoss S= erver view. (If JBoss AS + is already running, stop it by clicking on the red ico= n and then start it again. + Remember, the Struts run-time requires restarting the = servlet engine when any + changes have been made.) + + + After the messages in the Console tabbed view stop s= crolling, JBoss AS is + available. At this point, right-click on the getName g= lobal forward in the + struts-config.xml diagram view and select Run on Serve= r. + + + The browser should appear with the application started. + + = + + + + + JBoss Developer Studio + Struts + Struts Validation + + +Struts Validation Examples + +Validation of input is an imp= ortant part of any Web application. All Apache Jakarta frameworks, = +including Struts, can use a common Jakarta Validation Framework for stream= lining this aspect of Web = +application development. The Validation Framework allows you to define val= idation rules and then apply these rules on the client-side or the server-s= ide. + + JBoss Developer Studio makes using the Validation Framework in Struts even easier with the help of a= specialized editor for the XML files that controls validation in a project= . In this document, we'll show you how this all works by creating some simp= le client-side validation and server-side validation examples. + +

+ +Starting Point +The example assumes that you have already created our sample "Struts= Hello" application from the = +Getting Started Guide for Creating a Struts Application. You should have t= he JBoss Developer Studio perspective + open on this StrutsHello project. +

+ +

+ +Defining the Validation Rule +In these steps you will set up the validation that can be used for e= ither client-side or = +server side validation. You need to enable validation as a part of the pro= ject, define an error message, and tie it into an appropriate part of the a= pplication. + + +Right-click on a "plug-ins" node under the StrutsHello > Configuration > default > str= uts-config.xml node in the Web Projects view and sele= ct Create Special Plugin > Validat= ors from the context menu +Further down in the Web Projects view, right-click on the = +StrutsHello > ResourceBundles node and select N= ew > Properties File...from the context menu +In the dialog box, click on the Browse...button next to the Folder field,= expand the + JavaSource folder in this next dialog box, select the sample subfolder= , and click on the OK button + Back in the first dialog box, type in "applResources" = for the Name field and click on the F= inish button +Right-click on a newly created file and select <= property moreinfo=3D"none">Add > Default Error Messages + from the context menu + +Drag up the sample.applResources icon until you can drop i= t on the resources folder under struts-config.xml +Select File > Sav= e All from the menu bar +Select validation.xml under the StrutsHello > Validation node and doub= le-click it to open it with the JBoss Tools XML Editor +Here you must create a Formset. +In the validation.xml file editor click the button Create Formset on the = panel Formsets<= /para> +In the dialog Add Fo= rmset fill the fields Language and Country or just leave them empty to create a def= ault formset. Click OK + +

+ Create Formset + = + + + + + + +Expand the "form-beans" node under the StrutsHello > Configuration > default > struts-= config.xml node. Then, drag the form bean "GetNameFor= m" and drop it onto a formset in the XML Editor +In the Validation Editor, expand the formset node, right-c= lick GetNameForm, and select Create F= ield... from the context menu +Enter a name for Property in the dialog box. A new propert= y will be created: + +

+ New Property Is Added + = + + + + + + +In the Properties view for the name field to the right of = the "tree" for the validation.xml file, click on the Change...button next to the Depends e= ntry field +In the displayed double list, select required from the left list and then= click Add + Click Ok +Right-click name and select Add Arg... from the context menu +In the Add Arg dialog box, click on the Change...button next to the Key field + In the Key dialog box that appears now, click on the <= emphasis>Add button + Enter "name.required" in the Name field, and enter a p= erson's name in the Value field + Click Finish, then Ok, and then Ok<= /emphasis> again +Select File > Sav= e All from the menu bar + +

+ +

+ +Client-Side Validation +Client-side validation uses a= scripting language (like JavaScript) running in the client browser to actu= ally do the validation. In a Struts = application using the Validation Fra= mework, however, you don't actually have to do any of the script coding. Th= e Validation Framework handles this.= +To see how this works in our application, you'll just need to make a= couple of modifications to one of the JSP files. + +Double-click inputname.jsp under StrutsHello > WEB-ROOT(WebContent) > pages to open it for editing +Find the tag near the top and hit Return to make a new li= ne under it + In the JBoss Tools Palette view to the right, open the= Struts HTML folder and click on the javascript tag +Back in the editor, just in front of the closing slash for= this inserted tag, hit Ctrl+Space and select "formName" from the prompting= menu +Over in the Web Projects view, select GetNameForm under th= e StrutsHello > Configuration >= default > struts-config.xml > form-beans node,= drag it, and drop it between the quotes in the editor +Modify the <html:form> tag by inserting= this attribute: + + + +The file should now look like this: + + + + + + + + + + Input name: + + + +]]> + +Select File > Sav= e from the menu bar +Start JBoss Application Server by clicking on its icon (a = right-pointing arrow) in the toolbar + Click the Run icon( + + ) or right click your project folder= and select Run As > Run on Server= + + +In the browser window, click on the "Say Hel= lo!" button without having entered any name in the form +A JavaScript error message should be displayed in an alert box. +

+ +Server Side Validation +Server side validation does the validation inside the application on= the server. In a Struts application using the Validation Framework, you st= ill don't have to do any of the actual validation coding. The Validation Fr= amework handles this. You will though have to make a few changes to the JSP= file you modified for client-side validation along with a change to an act= ion and a few changes to the form bean class. +

+ +

+ +Editing the JSP File + +Reopen inputname.jsp for editing +Delete the "onsubmit" attribute in the

<html:for=
m>

element that you put in for client-side validation + +Add an <html:errors/> tag after the = + <html:form> + tag + +The JSP file should now look like this: + + + + + + + + + Input name: + + + + + +]]> + +

+ +

+ +Editing the Action + +In the Web Projects view, expand the node under the StrutsHello > Configuration > default= > struts-config.xml > action-mappings node, ri= ght-click the /greeting action, and then select Prop= erties...from the context menu + + In the Edit Properties window, insert the cursor into = the value column for the input property and click on the ... button + + In the dialog box, make sure the Pages tab is selected= , select StrutsHello > WEB-ROOT(We= bContent) > pages > inputname.jsp, click the Ok button, and th= en click on the Close button + +

+ + +Editing the Form Bean + +Right-click the /gre= eting action again and select Open Form-bean Source t= o open the GetNameForm.java file for editing +Change the class that it extends from: org.apache.struts.action.ActionForm to org.apache.struts.validator.Vali= datorForm +Comment out a validate method + +The file should now look like this: + + + +Select File > Sav= e All from the menu bar +Reload the application into JBoss AS by clicking on the "C= hange Time Stamp" icon (a finger pointing with a little star) in the toolba= r +Run the application +In the browser window, click on the "Say Hello!" button wi= thout having entered any name in the form + +The error message should appear in a refreshed version of the form.<= /para> +

+ + + = + + + + + JBoss Tools + Struts + Struts Application + + + + Other Relevant Resources on the topic + + Our reference: Struts Tools Reference Guide + Apache Struts: Struts T= echnology + Struts 2: Apache St= ruts 2 + Get Started: Struts Getting + Started + Struts on IBM: Struts - + An open-source MVC implementation + FAQ: = Struts FAQ + Download: Release of Apache + Struts + + Thus, this tutorial should help you to execute the hole developm= ent circle for building a + sample Struts-based Web application using JBoss Tools bundle of Eclipse + plugins starting from organizing a new Struts project and ending w= ith the running and + deploying it onto the JBoss Server. + + To find out all the features of JBos= s Tools for working with Struts + refer to our Struts Tools Reference Guide. If you + still have questions you are always welcome on = + JBoss + Tools Forum. + + + = + = + --===============0960306032867256421==--