[ https://jira.jboss.org/jira/browse/JBPM-2711?page=com.atlassian.jira.plug... ] Martin Porter updated JBPM-2711: -------------------------------- Description: I have a sub-process that is waiting at a <state> activity. If I attempt to signal that activity using the subprocess id I get an exception with 'inactive scope'. Below is the code I am using to signal the activity and also the output (system.out) to show the status:- childProcessDefinition = repositoryService.createProcessDefinitionQuery().processDefinitionKey(CHILD_PROCESS_KEY).uniqueResult(); ProcessInstanceQuery query = executionService.createProcessInstanceQuery().processDefinitionId(childProcessDefinition.getId()); ProcessInstance childInstance = query.uniqueResult(); System.out.println("Found Child Process Instance With Id [" + childInstance.getId() + "]"); System.out.println("Is Active ? " + childInstance.isActive(BUSINESS_SERVICE_RESPONSE_HANDLER)); System.out.println("State = " + childInstance.getState()); Set<String> activities = childInstance.findActiveActivityNames(); for (String activity : activities) { System.out.println("Active Activity = " + activity); } executionService.signalExecutionById(childInstance.getId(), AbstractServiceDispatcher.SignalState.SUCCESS.getSignalName(), params); And here follows the output & stack trace:- Found Child Process Instance With Id [org.jbpm.examples.subprocess.usecase.waitstate.child.30020] Is Active ? true State = inactive-scope Active Activity = Business Service Response Handler 11:25:30,862 FIN | [ExecuteActivity] execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020.Business Service Response Handler] executes activity(Business Service Response Handler) 11:25:30,862 FIN | [ExecuteJobCmd] executed job ExecuteActivityMessage[30054] 11:25:30,862 FIN | [HibernateSessionResource] ----- committing hibernate tx 10796546 ------------------------------------------------------- 11:25:32,828 FIN | [HibernateSessionResource] ----- beginning hibernate tx 11998234 -------------------------------------------------------- 11:25:32,828 FIN | [HibernateSessionResource] ----- committing hibernate tx 32888473 ------------------------------------------------------- 11:25:32,828 FIN | [HibernateSessionResource] ----- beginning hibernate tx 21290107 -------------------------------------------------------- 11:25:32,829 FIN | [HibernateSessionResource] ----- committing hibernate tx 22589165 ------------------------------------------------------- Found Child Process Instance With Id [org.jbpm.examples.subprocess.usecase.waitstate.child.30020] 11:25:32,829 FIN | [HibernateSessionResource] ----- beginning hibernate tx 23590079 -------------------------------------------------------- ### EXCEPTION ########################################### 11:25:32,829 INF | [DefaultCommandService] exception while executing command org.jbpm.pvm.internal.cmd.SignalCmd@88e83d org.jbpm.api.JbpmException: execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020] is not active: inactive-scope at org.jbpm.pvm.internal.model.ExecutionImpl.checkActive(ExecutionImpl.java:1024) at org.jbpm.pvm.internal.model.ExecutionImpl.signal(ExecutionImpl.java:411) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:61) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:35) at org.jbpm.pvm.internal.svc.DefaultCommandService.execute(DefaultCommandService.java:42) at org.jbpm.pvm.internal.tx.StandardTransactionInterceptor.execute(StandardTransactionInterceptor.java:54) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.executeInNewEnvironment(EnvironmentInterceptor.java:53) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.execute(EnvironmentInterceptor.java:40) at org.jbpm.pvm.internal.svc.RetryInterceptor.execute(RetryInterceptor.java:55) at org.jbpm.pvm.internal.svc.SkipInterceptor.execute(SkipInterceptor.java:43) at org.jbpm.pvm.internal.svc.ExecutionServiceImpl.signalExecutionById(ExecutionServiceImpl.java:92) at org.jbpm.examples.subprocess.usecase.waitstate.SimpleSubflowUsecaseWaitStateTest.testSimpleSubflowRequestRetryThenSkipStepThenEndSuccess(SimpleSubflowUsecaseWaitStateTest.java:700) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at junit.framework.TestCase.runTest(TestCase.java:164) at org.jbpm.test.BaseJbpmTestCase.runTest(BaseJbpmTestCase.java:80) at junit.framework.TestCase.runBare(TestCase.java:130) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:120) at junit.framework.TestSuite.runTest(TestSuite.java:230) at junit.framework.TestSuite.run(TestSuite.java:225) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:467) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:683) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:390) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:197) ### EXCEPTION ########################################### 11:25:32,829 FIN | [HibernateSessionResource] ----- rolling back hibernate tx 4657294 ----------------------------------------------------- 11:25:32,829 SEV | [BaseJbpmTestCase] ### EXCEPTION ########################################### 11:25:32,829 SEV | [BaseJbpmTestCase] TEST THROWS EXCEPTION: execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020] is not active: inactive-scope org.jbpm.api.JbpmException: execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020] is not active: inactive-scope at org.jbpm.pvm.internal.model.ExecutionImpl.checkActive(ExecutionImpl.java:1024) at org.jbpm.pvm.internal.model.ExecutionImpl.signal(ExecutionImpl.java:411) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:61) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:35) at org.jbpm.pvm.internal.svc.DefaultCommandService.execute(DefaultCommandService.java:42) at org.jbpm.pvm.internal.tx.StandardTransactionInterceptor.execute(StandardTransactionInterceptor.java:54) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.executeInNewEnvironment(EnvironmentInterceptor.java:53) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.execute(EnvironmentInterceptor.java:40) at org.jbpm.pvm.internal.svc.RetryInterceptor.execute(RetryInterceptor.java:55) at org.jbpm.pvm.internal.svc.SkipInterceptor.execute(SkipInterceptor.java:43) at org.jbpm.pvm.internal.svc.ExecutionServiceImpl.signalExecutionById(ExecutionServiceImpl.java:92) at org.jbpm.examples.subprocess.usecase.waitstate.SimpleSubflowUsecaseWaitStateTest.testSimpleSubflowRequestRetryThenSkipStepThenEndSuccess(SimpleSubflowUsecaseWaitStateTest.java:700) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at junit.framework.TestCase.runTest(TestCase.java:164) at org.jbpm.test.BaseJbpmTestCase.runTest(BaseJbpmTestCase.java:80) at junit.framework.TestCase.runBare(TestCase.java:130) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:120) at junit.framework.TestSuite.runTest(TestSuite.java:230) at junit.framework.TestSuite.run(TestSuite.java:225) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:467) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:683) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:390) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:197) ### EXCEPTION ########################################### 11:25:32,829 SEV | [BaseJbpmTestCase] was: I have a sub-process that is waiting at a <state> activity. If I attempt to signal that activity using the subprocess id I get an exception with 'inactive scope'. Below is the code I am using to signal the activity and also the output (system.out) to show the status:- ProcessInstanceQuery query = executionService.createProcessInstanceQuery().processDefinitionId(childProcessDefinition.getId()); ProcessInstance childInstance = query.uniqueResult(); System.out.println("Found Child Process Instance With Id [" + childInstance.getId() + "]"); System.out.println("Is Active ? " + childInstance.isActive(BUSINESS_SERVICE_RESPONSE_HANDLER)); System.out.println("State = " + childInstance.getState()); Set<String> activities = childInstance.findActiveActivityNames(); for (String activity : activities) { System.out.println("Active Activity = " + activity); } executionService.signalExecutionById(childInstance.getId(), AbstractServiceDispatcher.SignalState.SUCCESS.getSignalName(), params); And here follows the output & stack trace:- Is Active ? true State = inactive-scope Active Activity = Business Service Response Handler 11:25:30,862 FIN | [ExecuteActivity] execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020.Business Service Response Handler] executes activity(Business Service Response Handler) 11:25:30,862 FIN | [ExecuteJobCmd] executed job ExecuteActivityMessage[30054] 11:25:30,862 FIN | [HibernateSessionResource] ----- committing hibernate tx 10796546 ------------------------------------------------------- 11:25:32,828 FIN | [HibernateSessionResource] ----- beginning hibernate tx 11998234 -------------------------------------------------------- 11:25:32,828 FIN | [HibernateSessionResource] ----- committing hibernate tx 32888473 ------------------------------------------------------- 11:25:32,828 FIN | [HibernateSessionResource] ----- beginning hibernate tx 21290107 -------------------------------------------------------- 11:25:32,829 FIN | [HibernateSessionResource] ----- committing hibernate tx 22589165 ------------------------------------------------------- Found Child Process Instance With Id [org.jbpm.examples.subprocess.usecase.waitstate.child.30020] 11:25:32,829 FIN | [HibernateSessionResource] ----- beginning hibernate tx 23590079 -------------------------------------------------------- ### EXCEPTION ########################################### 11:25:32,829 INF | [DefaultCommandService] exception while executing command org.jbpm.pvm.internal.cmd.SignalCmd@88e83d org.jbpm.api.JbpmException: execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020] is not active: inactive-scope at org.jbpm.pvm.internal.model.ExecutionImpl.checkActive(ExecutionImpl.java:1024) at org.jbpm.pvm.internal.model.ExecutionImpl.signal(ExecutionImpl.java:411) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:61) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:35) at org.jbpm.pvm.internal.svc.DefaultCommandService.execute(DefaultCommandService.java:42) at org.jbpm.pvm.internal.tx.StandardTransactionInterceptor.execute(StandardTransactionInterceptor.java:54) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.executeInNewEnvironment(EnvironmentInterceptor.java:53) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.execute(EnvironmentInterceptor.java:40) at org.jbpm.pvm.internal.svc.RetryInterceptor.execute(RetryInterceptor.java:55) at org.jbpm.pvm.internal.svc.SkipInterceptor.execute(SkipInterceptor.java:43) at org.jbpm.pvm.internal.svc.ExecutionServiceImpl.signalExecutionById(ExecutionServiceImpl.java:92) at org.jbpm.examples.subprocess.usecase.waitstate.SimpleSubflowUsecaseWaitStateTest.testSimpleSubflowRequestRetryThenSkipStepThenEndSuccess(SimpleSubflowUsecaseWaitStateTest.java:700) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at junit.framework.TestCase.runTest(TestCase.java:164) at org.jbpm.test.BaseJbpmTestCase.runTest(BaseJbpmTestCase.java:80) at junit.framework.TestCase.runBare(TestCase.java:130) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:120) at junit.framework.TestSuite.runTest(TestSuite.java:230) at junit.framework.TestSuite.run(TestSuite.java:225) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:467) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:683) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:390) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:197) ### EXCEPTION ########################################### 11:25:32,829 FIN | [HibernateSessionResource] ----- rolling back hibernate tx 4657294 ----------------------------------------------------- 11:25:32,829 SEV | [BaseJbpmTestCase] ### EXCEPTION ########################################### 11:25:32,829 SEV | [BaseJbpmTestCase] TEST THROWS EXCEPTION: execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020] is not active: inactive-scope org.jbpm.api.JbpmException: execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020] is not active: inactive-scope at org.jbpm.pvm.internal.model.ExecutionImpl.checkActive(ExecutionImpl.java:1024) at org.jbpm.pvm.internal.model.ExecutionImpl.signal(ExecutionImpl.java:411) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:61) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:35) at org.jbpm.pvm.internal.svc.DefaultCommandService.execute(DefaultCommandService.java:42) at org.jbpm.pvm.internal.tx.StandardTransactionInterceptor.execute(StandardTransactionInterceptor.java:54) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.executeInNewEnvironment(EnvironmentInterceptor.java:53) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.execute(EnvironmentInterceptor.java:40) at org.jbpm.pvm.internal.svc.RetryInterceptor.execute(RetryInterceptor.java:55) at org.jbpm.pvm.internal.svc.SkipInterceptor.execute(SkipInterceptor.java:43) at org.jbpm.pvm.internal.svc.ExecutionServiceImpl.signalExecutionById(ExecutionServiceImpl.java:92) at org.jbpm.examples.subprocess.usecase.waitstate.SimpleSubflowUsecaseWaitStateTest.testSimpleSubflowRequestRetryThenSkipStepThenEndSuccess(SimpleSubflowUsecaseWaitStateTest.java:700) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at junit.framework.TestCase.runTest(TestCase.java:164) at org.jbpm.test.BaseJbpmTestCase.runTest(BaseJbpmTestCase.java:80) at junit.framework.TestCase.runBare(TestCase.java:130) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:120) at junit.framework.TestSuite.runTest(TestSuite.java:230) at junit.framework.TestSuite.run(TestSuite.java:225) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:467) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:683) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:390) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:197) ### EXCEPTION ########################################### 11:25:32,829 SEV | [BaseJbpmTestCase] -- This message is automatically generated by JIRA. - If you think it was sent incorrectly contact one of the administrators: https://jira.jboss.org/jira/secure/Administrators.jspa - For more information on JIRA, see: http://www.atlassian.com/software/jira

[ https://jira.jboss.org/jira/browse/JBPM-2711?page=com.atlassian.jira.plug... ] Martin Porter updated JBPM-2711: -------------------------------- Description: I have a sub-process that is waiting at a <state> activity. If I attempt to signal that activity using the subprocess id I get an exception with 'inactive scope'. Below is the code I am using to signal the activity and also the output (system.out) to show the status:- ProcessDefinition childProcessDefinition = repositoryService.createProcessDefinitionQuery().processDefinitionKey("org.jbpm.examples.subprocess.usecase.waitstate.child").uniqueResult(); ProcessInstanceQuery query = executionService.createProcessInstanceQuery().processDefinitionId(childProcessDefinition.getId()); ProcessInstance childInstance = query.uniqueResult(); System.out.println("Found Child Process Instance With Id [" + childInstance.getId() + "]"); System.out.println("Is Active ? " + childInstance.isActive("Business Service Response Handler")); System.out.println("State = " + childInstance.getState()); Set<String> activities = childInstance.findActiveActivityNames(); for (String activity : activities) { System.out.println("Active Activity = " + activity); } executionService.signalExecutionById(childInstance.getId(), AbstractServiceDispatcher.SignalState.SUCCESS.getSignalName(), params); And here follows the output & stack trace:- Found Child Process Instance With Id [org.jbpm.examples.subprocess.usecase.waitstate.child.30020] Is Active ? true State = inactive-scope Active Activity = Business Service Response Handler 11:25:30,862 FIN | [ExecuteActivity] execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020.Business Service Response Handler] executes activity(Business Service Response Handler) 11:25:30,862 FIN | [ExecuteJobCmd] executed job ExecuteActivityMessage[30054] 11:25:30,862 FIN | [HibernateSessionResource] ----- committing hibernate tx 10796546 ------------------------------------------------------- 11:25:32,828 FIN | [HibernateSessionResource] ----- beginning hibernate tx 11998234 -------------------------------------------------------- 11:25:32,828 FIN | [HibernateSessionResource] ----- committing hibernate tx 32888473 ------------------------------------------------------- 11:25:32,828 FIN | [HibernateSessionResource] ----- beginning hibernate tx 21290107 -------------------------------------------------------- 11:25:32,829 FIN | [HibernateSessionResource] ----- committing hibernate tx 22589165 ------------------------------------------------------- Found Child Process Instance With Id [org.jbpm.examples.subprocess.usecase.waitstate.child.30020] 11:25:32,829 FIN | [HibernateSessionResource] ----- beginning hibernate tx 23590079 -------------------------------------------------------- ### EXCEPTION ########################################### 11:25:32,829 INF | [DefaultCommandService] exception while executing command org.jbpm.pvm.internal.cmd.SignalCmd@88e83d org.jbpm.api.JbpmException: execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020] is not active: inactive-scope at org.jbpm.pvm.internal.model.ExecutionImpl.checkActive(ExecutionImpl.java:1024) at org.jbpm.pvm.internal.model.ExecutionImpl.signal(ExecutionImpl.java:411) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:61) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:35) at org.jbpm.pvm.internal.svc.DefaultCommandService.execute(DefaultCommandService.java:42) at org.jbpm.pvm.internal.tx.StandardTransactionInterceptor.execute(StandardTransactionInterceptor.java:54) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.executeInNewEnvironment(EnvironmentInterceptor.java:53) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.execute(EnvironmentInterceptor.java:40) at org.jbpm.pvm.internal.svc.RetryInterceptor.execute(RetryInterceptor.java:55) at org.jbpm.pvm.internal.svc.SkipInterceptor.execute(SkipInterceptor.java:43) at org.jbpm.pvm.internal.svc.ExecutionServiceImpl.signalExecutionById(ExecutionServiceImpl.java:92) at org.jbpm.examples.subprocess.usecase.waitstate.SimpleSubflowUsecaseWaitStateTest.testSimpleSubflowRequestRetryThenSkipStepThenEndSuccess(SimpleSubflowUsecaseWaitStateTest.java:700) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at junit.framework.TestCase.runTest(TestCase.java:164) at org.jbpm.test.BaseJbpmTestCase.runTest(BaseJbpmTestCase.java:80) at junit.framework.TestCase.runBare(TestCase.java:130) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:120) at junit.framework.TestSuite.runTest(TestSuite.java:230) at junit.framework.TestSuite.run(TestSuite.java:225) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:467) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:683) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:390) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:197) ### EXCEPTION ########################################### 11:25:32,829 FIN | [HibernateSessionResource] ----- rolling back hibernate tx 4657294 ----------------------------------------------------- 11:25:32,829 SEV | [BaseJbpmTestCase] ### EXCEPTION ########################################### 11:25:32,829 SEV | [BaseJbpmTestCase] TEST THROWS EXCEPTION: execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020] is not active: inactive-scope org.jbpm.api.JbpmException: execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020] is not active: inactive-scope at org.jbpm.pvm.internal.model.ExecutionImpl.checkActive(ExecutionImpl.java:1024) at org.jbpm.pvm.internal.model.ExecutionImpl.signal(ExecutionImpl.java:411) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:61) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:35) at org.jbpm.pvm.internal.svc.DefaultCommandService.execute(DefaultCommandService.java:42) at org.jbpm.pvm.internal.tx.StandardTransactionInterceptor.execute(StandardTransactionInterceptor.java:54) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.executeInNewEnvironment(EnvironmentInterceptor.java:53) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.execute(EnvironmentInterceptor.java:40) at org.jbpm.pvm.internal.svc.RetryInterceptor.execute(RetryInterceptor.java:55) at org.jbpm.pvm.internal.svc.SkipInterceptor.execute(SkipInterceptor.java:43) at org.jbpm.pvm.internal.svc.ExecutionServiceImpl.signalExecutionById(ExecutionServiceImpl.java:92) at org.jbpm.examples.subprocess.usecase.waitstate.SimpleSubflowUsecaseWaitStateTest.testSimpleSubflowRequestRetryThenSkipStepThenEndSuccess(SimpleSubflowUsecaseWaitStateTest.java:700) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at junit.framework.TestCase.runTest(TestCase.java:164) at org.jbpm.test.BaseJbpmTestCase.runTest(BaseJbpmTestCase.java:80) at junit.framework.TestCase.runBare(TestCase.java:130) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:120) at junit.framework.TestSuite.runTest(TestSuite.java:230) at junit.framework.TestSuite.run(TestSuite.java:225) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:467) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:683) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:390) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:197) ### EXCEPTION ########################################### 11:25:32,829 SEV | [BaseJbpmTestCase] If I remove the <timer> from the transition all works as expected. I also made a change the jbpm4.3.xsd to allow the timer to be added to the transition of a <custom> node in the same way as for <state> (see http://community.jboss.org/message/518116#518116 ). The result was the same that timers worked but the signalling fails and removing the <timer> allows the signalling to work again. was: I have a sub-process that is waiting at a <state> activity. If I attempt to signal that activity using the subprocess id I get an exception with 'inactive scope'. Below is the code I am using to signal the activity and also the output (system.out) to show the status:- ProcessDefinition childProcessDefinition = repositoryService.createProcessDefinitionQuery().processDefinitionKey("org.jbpm.examples.subprocess.usecase.waitstate.child").uniqueResult(); ProcessInstanceQuery query = executionService.createProcessInstanceQuery().processDefinitionId(childProcessDefinition.getId()); ProcessInstance childInstance = query.uniqueResult(); System.out.println("Found Child Process Instance With Id [" + childInstance.getId() + "]"); System.out.println("Is Active ? " + childInstance.isActive("Business Service Response Handler")); System.out.println("State = " + childInstance.getState()); Set<String> activities = childInstance.findActiveActivityNames(); for (String activity : activities) { System.out.println("Active Activity = " + activity); } executionService.signalExecutionById(childInstance.getId(), AbstractServiceDispatcher.SignalState.SUCCESS.getSignalName(), params); And here follows the output & stack trace:- Found Child Process Instance With Id [org.jbpm.examples.subprocess.usecase.waitstate.child.30020] Is Active ? true State = inactive-scope Active Activity = Business Service Response Handler 11:25:30,862 FIN | [ExecuteActivity] execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020.Business Service Response Handler] executes activity(Business Service Response Handler) 11:25:30,862 FIN | [ExecuteJobCmd] executed job ExecuteActivityMessage[30054] 11:25:30,862 FIN | [HibernateSessionResource] ----- committing hibernate tx 10796546 ------------------------------------------------------- 11:25:32,828 FIN | [HibernateSessionResource] ----- beginning hibernate tx 11998234 -------------------------------------------------------- 11:25:32,828 FIN | [HibernateSessionResource] ----- committing hibernate tx 32888473 ------------------------------------------------------- 11:25:32,828 FIN | [HibernateSessionResource] ----- beginning hibernate tx 21290107 -------------------------------------------------------- 11:25:32,829 FIN | [HibernateSessionResource] ----- committing hibernate tx 22589165 ------------------------------------------------------- Found Child Process Instance With Id [org.jbpm.examples.subprocess.usecase.waitstate.child.30020] 11:25:32,829 FIN | [HibernateSessionResource] ----- beginning hibernate tx 23590079 -------------------------------------------------------- ### EXCEPTION ########################################### 11:25:32,829 INF | [DefaultCommandService] exception while executing command org.jbpm.pvm.internal.cmd.SignalCmd@88e83d org.jbpm.api.JbpmException: execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020] is not active: inactive-scope at org.jbpm.pvm.internal.model.ExecutionImpl.checkActive(ExecutionImpl.java:1024) at org.jbpm.pvm.internal.model.ExecutionImpl.signal(ExecutionImpl.java:411) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:61) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:35) at org.jbpm.pvm.internal.svc.DefaultCommandService.execute(DefaultCommandService.java:42) at org.jbpm.pvm.internal.tx.StandardTransactionInterceptor.execute(StandardTransactionInterceptor.java:54) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.executeInNewEnvironment(EnvironmentInterceptor.java:53) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.execute(EnvironmentInterceptor.java:40) at org.jbpm.pvm.internal.svc.RetryInterceptor.execute(RetryInterceptor.java:55) at org.jbpm.pvm.internal.svc.SkipInterceptor.execute(SkipInterceptor.java:43) at org.jbpm.pvm.internal.svc.ExecutionServiceImpl.signalExecutionById(ExecutionServiceImpl.java:92) at org.jbpm.examples.subprocess.usecase.waitstate.SimpleSubflowUsecaseWaitStateTest.testSimpleSubflowRequestRetryThenSkipStepThenEndSuccess(SimpleSubflowUsecaseWaitStateTest.java:700) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at junit.framework.TestCase.runTest(TestCase.java:164) at org.jbpm.test.BaseJbpmTestCase.runTest(BaseJbpmTestCase.java:80) at junit.framework.TestCase.runBare(TestCase.java:130) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:120) at junit.framework.TestSuite.runTest(TestSuite.java:230) at junit.framework.TestSuite.run(TestSuite.java:225) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:467) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:683) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:390) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:197) ### EXCEPTION ########################################### 11:25:32,829 FIN | [HibernateSessionResource] ----- rolling back hibernate tx 4657294 ----------------------------------------------------- 11:25:32,829 SEV | [BaseJbpmTestCase] ### EXCEPTION ########################################### 11:25:32,829 SEV | [BaseJbpmTestCase] TEST THROWS EXCEPTION: execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020] is not active: inactive-scope org.jbpm.api.JbpmException: execution[org.jbpm.examples.subprocess.usecase.waitstate.child.30020] is not active: inactive-scope at org.jbpm.pvm.internal.model.ExecutionImpl.checkActive(ExecutionImpl.java:1024) at org.jbpm.pvm.internal.model.ExecutionImpl.signal(ExecutionImpl.java:411) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:61) at org.jbpm.pvm.internal.cmd.SignalCmd.execute(SignalCmd.java:35) at org.jbpm.pvm.internal.svc.DefaultCommandService.execute(DefaultCommandService.java:42) at org.jbpm.pvm.internal.tx.StandardTransactionInterceptor.execute(StandardTransactionInterceptor.java:54) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.executeInNewEnvironment(EnvironmentInterceptor.java:53) at org.jbpm.pvm.internal.svc.EnvironmentInterceptor.execute(EnvironmentInterceptor.java:40) at org.jbpm.pvm.internal.svc.RetryInterceptor.execute(RetryInterceptor.java:55) at org.jbpm.pvm.internal.svc.SkipInterceptor.execute(SkipInterceptor.java:43) at org.jbpm.pvm.internal.svc.ExecutionServiceImpl.signalExecutionById(ExecutionServiceImpl.java:92) at org.jbpm.examples.subprocess.usecase.waitstate.SimpleSubflowUsecaseWaitStateTest.testSimpleSubflowRequestRetryThenSkipStepThenEndSuccess(SimpleSubflowUsecaseWaitStateTest.java:700) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at junit.framework.TestCase.runTest(TestCase.java:164) at org.jbpm.test.BaseJbpmTestCase.runTest(BaseJbpmTestCase.java:80) at junit.framework.TestCase.runBare(TestCase.java:130) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:120) at junit.framework.TestSuite.runTest(TestSuite.java:230) at junit.framework.TestSuite.run(TestSuite.java:225) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:130) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:467) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:683) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:390) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:197) ### EXCEPTION ########################################### 11:25:32,829 SEV | [BaseJbpmTestCase] -- This message is automatically generated by JIRA. - If you think it was sent incorrectly contact one of the administrators: https://jira.jboss.org/jira/secure/Administrators.jspa - For more information on JIRA, see: http://www.atlassian.com/software/jira

[ https://jira.jboss.org/jira/browse/JBPM-2711?page=com.atlassian.jira.plug... ] Ronald van Kuijk commented on JBPM-2711: ---------------------------------------- Martin, First let me state that your testcase is not really minimalistic. There is a lot in it, that might be nice as an additional example, but for debugging it is kind of extensive. But I'll give it a try. For me it also does not fail at the end, but fairly soon in the beginning at assertContainsTask(tasks,CREATE_REQUEST_ERROR_TASK_NAME); So I'm not sure if that is what you meant, or.... -- This message is automatically generated by JIRA. - If you think it was sent incorrectly contact one of the administrators: https://jira.jboss.org/jira/secure/Administrators.jspa - For more information on JIRA, see: http://www.atlassian.com/software/jira

[ https://jira.jboss.org/jira/browse/JBPM-2711?page=com.atlassian.jira.plug... ] Ronald van Kuijk commented on JBPM-2711: ---------------------------------------- My results, comments etc When you signal the execution, use the ID of the active execution. This is != the ID of the processInstance May I ask why you have everything async? Including tasks??? And when you execute messages/jobs (messages are for async things, jobs for timers) you can do without all delays in your test. What you basically do is use the timers/async things, but without the 'duedates' etc. Again, see the jbpm testcases for examples. It looks like: // make sure the async java node is executed Job async = managementService.createJobQuery().uniqueResult(); managementService.executeJob(async.getId()); Job timeout = managementService.createJobQuery().timers().uniqueResult(); managementService.executeJob(timeout.getId()); When I do this, my test runs green WITH an adapted xsd.... The only change is that I removed continue=async of the tasks but that is has no real disadvantage imo. To be sure, this example is with timers on states, right? not on a custom. But PLEASE make minimal testcases if demonstrating issues. These are way to extensive. -- This message is automatically generated by JIRA. - If you think it was sent incorrectly contact one of the administrators: https://jira.jboss.org/jira/secure/Administrators.jspa - For more information on JIRA, see: http://www.atlassian.com/software/jira

[ https://jira.jboss.org/jira/browse/JBPM-2711?page=com.atlassian.jira.plug... ] Ronald van Kuijk commented on JBPM-2711: ---------------------------------------- I signalled the active activity: cie = childInstance.getExecutionsMap(); cin = cie.keySet(); for (String string : cin) { System.out.println("Execution key" + string); System.out.println("Execution state " + childInstance.getExecution(string).getState()) ; System.out.println("Execution id " + childInstance.getExecution(string).getId()) ; executionService.signalExecutionById(childInstance.getExecution(string).getId(), AbstractServiceDispatcher.SignalState.SUCCESS.getSignalName(), params); } (loop since I did not know what activity was active) If you have no timer, it could be that the root execution (process instance) is active, and signalling works like you do it (I'm not sure, these details are not known to me yet) Async is e.g. used for 'transaction demarcation' The api returns while in the background the node is executed in a new transaction. So you should use it when you need to. It is not needed to have failover specifically. So if you have just one async and the rest of the process nodes are normal, when something fails and a rollback is needed, it is rolled back to the last async node or task/state/custom that is a waitstate. What I get from your example, you want everything to be started automatically. Async can do this, but it does not require you to have it on every node. Regarding the timer, no you can leave the duedate on. The real jobscheduler does a query with e.g. duedate<now(), but the queries shown above ignores them and just executes them, so instead of in 1 minute or more, your test runs in just 5 seconds. -- This message is automatically generated by JIRA. - If you think it was sent incorrectly contact one of the administrators: https://jira.jboss.org/jira/secure/Administrators.jspa - For more information on JIRA, see: http://www.atlassian.com/software/jira

[ https://jira.jboss.org/jira/browse/JBPM-2711?page=com.atlassian.jira.plug... ] Ronald van Kuijk resolved JBPM-2711. ------------------------------------ Resolution: Rejected User error... read previous two comments on why -- This message is automatically generated by JIRA. - If you think it was sent incorrectly contact one of the administrators: https://jira.jboss.org/jira/secure/Administrators.jspa - For more information on JIRA, see: http://www.atlassian.com/software/jira

[ https://jira.jboss.org/jira/browse/JBPM-2711?page=com.atlassian.jira.plug... ] Martin Porter commented on JBPM-2711: ------------------------------------- Hi, Looking at your example I now see what you mean. However in the context of a <custom> or <state> node that has multiple transitions from it how can the management service be used to indicate which transition to take. In the example above there is either a timer transition or a message transition so presumably it takes the default transition, which will work in this case. But in our case we needed to signal a particular transition (out of three) which could be taken and hence this is why we used the signalExecutuionById(). Maybe I am missing the point here but looking at the job interface it only allows you to execute the job but no parameters can be supplied or a signal name !.?. Regards Martin -- This message is automatically generated by JIRA. - If you think it was sent incorrectly contact one of the administrators: https://jira.jboss.org/jira/secure/Administrators.jspa - For more information on JIRA, see: http://www.atlassian.com/software/jira

[ https://jira.jboss.org/jira/browse/JBPM-2711?page=com.atlassian.jira.plug... ] Martin Porter commented on JBPM-2711: ------------------------------------- Hi, OK so maybe I was not too quick. My previous comments still hold. I have an custom activity with my timer transition activate and waiting. If I execute the following:- Job job = managementService.createJobQuery().messages().uniqueResult(); I get no results. So in this case how can I signal the next transtion that I want the activity to take ?. And also how do I pass parameters to it ?. Executing the following finds me the one job (timer job) however this is not useful as I do not wish to take this transition as it will be taken automatically on the timer expiry. Job job = managementService.createJobQuery().timers().uniqueResult(); So back to my previous problem. How can I signal my waiting activity (with multiple transitions) which one to take ?. I must be missing something very obvious here ?. Regards Martin -- This message is automatically generated by JIRA. - If you think it was sent incorrectly contact one of the administrators: https://jira.jboss.org/jira/secure/Administrators.jspa - For more information on JIRA, see: http://www.atlassian.com/software/jira

[ https://jira.jboss.org/jira/browse/JBPM-2711?page=com.atlassian.jira.plug... ] Martin Porter commented on JBPM-2711: ------------------------------------- Hi, OK now I finally understand !. After playing around with a few cases. So now I can see what you were mentioning. It just took me a while to figure out how this hangs together. So in order for it to work I just needed to do :- Job jobTimer = managementService.createJobQuery().timers().uniqueResult(); Then:- executionService.signalExecutionById(jobTimer.getExecution().getId(), AbstractBusinessServiceDispatcher.SignalState.SUCCESS.getSignalName(), null); I was expecting to get the Job back from messages() query. As I thought that you only got the job execution back from timer() if you wanted to take the timer transition. So what you are saying is that if you have a timer then you have to get the job using the timer() query regardless of whether you intend to fire the timer or signal the process. I think some docs in this area might be useful as it is not at all clear to me from the userguide/dev guide how this is supposed to work. Anyhow now it does !. Thanks Regards Martin -- This message is automatically generated by JIRA. - If you think it was sent incorrectly contact one of the administrators: https://jira.jboss.org/jira/secure/Administrators.jspa - For more information on JIRA, see: http://www.atlassian.com/software/jira