June 2014 - overlord-issues - Jboss List Archives

[JBoss JIRA] (SRAMP-426) Upgrade switchyard version to 2.x

by Gary Brown (JIRA)

[ https://issues.jboss.org/browse/SRAMP-426?page=com.atlassian.jira.plugin.... ] Gary Brown reassigned SRAMP-426: -------------------------------- Assignee: Gary Brown (was: Kurt Stam) > Upgrade switchyard version to 2.x > --------------------------------- > > Key: SRAMP-426 > URL: https://issues.jboss.org/browse/SRAMP-426 > Project: S-RAMP > Issue Type: Task > Security Level: Public(Everyone can see) > Reporter: Gary Brown > Assignee: Gary Brown > Fix For: 0.5.0.Final > > > While doing the upgrade to IP BOM CR8 (SRAMP-245) had problems with the s-ramp-demos-switchyard-multiapp/order-service WebServiceTest - possibly an incompatibility between the older version of switchyard and the newer version of cxf in BOM CR8. > Have ignored the test for now to complete the CR8 upgrade - but the switchyard version needs to be upgraded to the 2.x stream asap to sort out any issues. -- This message was sent by Atlassian JIRA (v6.2.3#6260)

10 years

1
0
0 / 0

[JBoss JIRA] (SRAMP-455) use artifact SHA1 computed by ModeShape

by Brett Meyer (JIRA)

[ https://issues.jboss.org/browse/SRAMP-455?page=com.atlassian.jira.plugin.... ] Work on SRAMP-455 started by Brett Meyer. > use artifact SHA1 computed by ModeShape > --------------------------------------- > > Key: SRAMP-455 > URL: https://issues.jboss.org/browse/SRAMP-455 > Project: S-RAMP > Issue Type: Enhancement > Security Level: Public(Everyone can see) > Reporter: Brett Meyer > Assignee: Brett Meyer > > As suggested on https://issues.jboss.org/browse/MODE-2221, ModeShape already computes the SHA1 hash for artifacts. We could use that directly, rather than computing on our own. > Note that the hash is a ModeShape-specific extension and not supported by JCR. So, create an SPI and a default impl in the jcr-repo, but override for ModeShape. -- This message was sent by Atlassian JIRA (v6.2.3#6260)

10 years

1
0
0 / 0

[JBoss JIRA] (SRAMP-455) use artifact SHA1 computed by ModeShape

by Brett Meyer (JIRA)

[ https://issues.jboss.org/browse/SRAMP-455?page=com.atlassian.jira.plugin.... ] Brett Meyer updated SRAMP-455: ------------------------------ Git Pull Request: https://github.com/Governance/s-ramp/pull/431/files > use artifact SHA1 computed by ModeShape > --------------------------------------- > > Key: SRAMP-455 > URL: https://issues.jboss.org/browse/SRAMP-455 > Project: S-RAMP > Issue Type: Enhancement > Security Level: Public(Everyone can see) > Reporter: Brett Meyer > Assignee: Brett Meyer > > As suggested on https://issues.jboss.org/browse/MODE-2221, ModeShape already computes the SHA1 hash for artifacts. We could use that directly, rather than computing on our own. > Note that the hash is a ModeShape-specific extension and not supported by JCR. So, create an SPI and a default impl in the jcr-repo, but override for ModeShape. -- This message was sent by Atlassian JIRA (v6.2.3#6260)

10 years

1
0
0 / 0

[JBoss JIRA] (SRAMP-453) Exception if using Backspace on CLI password prompt

by Brett Meyer (JIRA)

[ https://issues.jboss.org/browse/SRAMP-453?page=com.atlassian.jira.plugin.... ] Brett Meyer commented on SRAMP-453: ----------------------------------- Looks like an aesh bug, but leaving open until I get confirmation on https://issues.jboss.org/browse/AESH-250 > Exception if using Backspace on CLI password prompt > --------------------------------------------------- > > Key: SRAMP-453 > URL: https://issues.jboss.org/browse/SRAMP-453 > Project: S-RAMP > Issue Type: Bug > Security Level: Public(Everyone can see) > Reporter: Brett Meyer > Assignee: Brett Meyer > > If you mistype a password in the CLI prompt and hit Backspace 1 too many times, boom. > S-RAMP Password: java.lang.ArrayIndexOutOfBoundsException > at java.lang.System.arraycopy(Native Method) > at java.lang.AbstractStringBuilder.insert(AbstractStringBuilder.java:1152) > at java.lang.StringBuilder.insert(StringBuilder.java:336) > at org.jboss.aesh.console.Buffer.write(Buffer.java:319) > at org.jboss.aesh.console.Console.writeChar(Console.java:837) > at org.jboss.aesh.console.Console.writeChars(Console.java:832) > at org.jboss.aesh.console.Console.parseOperation(Console.java:515) > at org.jboss.aesh.console.Console.read(Console.java:452) > at org.overlord.sramp.shell.InteractiveShellCommandReader.promptForPassword(InteractiveShellCommandReader.java:161) > at org.overlord.sramp.shell.ShellContextImpl.promptForPassword(ShellContextImpl.java:172) > at org.overlord.sramp.shell.commands.core.ConnectCommand.promptForPassword(ConnectCommand.java:107) > at org.overlord.sramp.shell.commands.core.ConnectCommand.execute(ConnectCommand.java:67) > at org.overlord.sramp.shell.SrampShell.run(SrampShell.java:102) > at org.overlord.sramp.shell.SrampShell.main(SrampShell.java:67) > at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) > at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) > at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) > at java.lang.reflect.Method.invoke(Method.java:606) > at org.codehaus.mojo.exec.ExecJavaMojo$1.run(ExecJavaMojo.java:297) > at java.lang.Thread.run(Thread.java:744) -- This message was sent by Atlassian JIRA (v6.2.3#6260)

10 years

1
0
0 / 0

[JBoss JIRA] (SRAMP-447) Support both EAP 6.1 and 6.3 in the installer

by Brett Meyer (JIRA)

[ https://issues.jboss.org/browse/SRAMP-447?page=com.atlassian.jira.plugin.... ] Work on SRAMP-447 started by Brett Meyer. > Support both EAP 6.1 and 6.3 in the installer > --------------------------------------------- > > Key: SRAMP-447 > URL: https://issues.jboss.org/browse/SRAMP-447 > Project: S-RAMP > Issue Type: Task > Security Level: Public(Everyone can see) > Reporter: Brett Meyer > Assignee: Brett Meyer > Fix For: 0.5.0.Final > > > SRAMP-382 combined EAP 6.1 and 6.3 support. For the most part, that's fine -- no compile issues, etc. However, the installer needs split back up in order to provide the correct ModeShape distro, etc. -- This message was sent by Atlassian JIRA (v6.2.3#6260)

10 years

1
0
0 / 0

[JBoss JIRA] (SRAMP-447) Support both EAP 6.1 and 6.3 in the installer

by Brett Meyer (JIRA)

[ https://issues.jboss.org/browse/SRAMP-447?page=com.atlassian.jira.plugin.... ] Brett Meyer updated SRAMP-447: ------------------------------ Summary: Support both EAP 6.1 and 6.3 in the installer (was: Re-split the installer into EAP 6.1 and 6.3) Git Pull Request: https://github.com/Governance/s-ramp/pull/430 > Support both EAP 6.1 and 6.3 in the installer > --------------------------------------------- > > Key: SRAMP-447 > URL: https://issues.jboss.org/browse/SRAMP-447 > Project: S-RAMP > Issue Type: Task > Security Level: Public(Everyone can see) > Reporter: Brett Meyer > Assignee: Brett Meyer > Fix For: 0.5.0.Final > > > SRAMP-382 combined EAP 6.1 and 6.3 support. For the most part, that's fine -- no compile issues, etc. However, the installer needs split back up in order to provide the correct ModeShape distro, etc. -- This message was sent by Atlassian JIRA (v6.2.3#6260)

10 years

1
0
0 / 0

[JBoss JIRA] (SRAMP-447) Support both EAP 6.1 and 6.3 in the installer

by Brett Meyer (JIRA)

[ https://issues.jboss.org/browse/SRAMP-447?page=com.atlassian.jira.plugin.... ] Brett Meyer commented on SRAMP-447: ----------------------------------- Can you both review https://github.com/Governance/s-ramp/pull/430? Comments appreciated. The only thing I don't like about it is that the s-ramp-distro-assembly now has to include both versions of ModeShape, but not sure if there's a way around that. > Support both EAP 6.1 and 6.3 in the installer > --------------------------------------------- > > Key: SRAMP-447 > URL: https://issues.jboss.org/browse/SRAMP-447 > Project: S-RAMP > Issue Type: Task > Security Level: Public(Everyone can see) > Reporter: Brett Meyer > Assignee: Brett Meyer > Fix For: 0.5.0.Final > > > SRAMP-382 combined EAP 6.1 and 6.3 support. For the most part, that's fine -- no compile issues, etc. However, the installer needs split back up in order to provide the correct ModeShape distro, etc. -- This message was sent by Atlassian JIRA (v6.2.3#6260)

10 years

1
0
0 / 0

[JBoss JIRA] (SRAMP-447) Re-split the installer into EAP 6.1 and 6.3

by Brett Meyer (JIRA)

[ https://issues.jboss.org/browse/SRAMP-447?page=com.atlassian.jira.plugin.... ] Brett Meyer commented on SRAMP-447: ----------------------------------- Just realized $JBOSS_HOME/version.txt exists ;) On it. > Re-split the installer into EAP 6.1 and 6.3 > ------------------------------------------- > > Key: SRAMP-447 > URL: https://issues.jboss.org/browse/SRAMP-447 > Project: S-RAMP > Issue Type: Task > Security Level: Public(Everyone can see) > Reporter: Brett Meyer > Assignee: Brett Meyer > Fix For: 0.5.0.Final > > > SRAMP-382 combined EAP 6.1 and 6.3 support. For the most part, that's fine -- no compile issues, etc. However, the installer needs split back up in order to provide the correct ModeShape distro, etc. -- This message was sent by Atlassian JIRA (v6.2.3#6260)

10 years

1
0
0 / 0

[JBoss JIRA] (SRAMP-447) Re-split the installer into EAP 6.1 and 6.3

by Gary Brown (JIRA)

[ https://issues.jboss.org/browse/SRAMP-447?page=com.atlassian.jira.plugin.... ] Gary Brown commented on SRAMP-447: ---------------------------------- Would prefer single eap6 target but ok with split if difficult. > Re-split the installer into EAP 6.1 and 6.3 > ------------------------------------------- > > Key: SRAMP-447 > URL: https://issues.jboss.org/browse/SRAMP-447 > Project: S-RAMP > Issue Type: Task > Security Level: Public(Everyone can see) > Reporter: Brett Meyer > Assignee: Brett Meyer > Fix For: 0.5.0.Final > > > SRAMP-382 combined EAP 6.1 and 6.3 support. For the most part, that's fine -- no compile issues, etc. However, the installer needs split back up in order to provide the correct ModeShape distro, etc. -- This message was sent by Atlassian JIRA (v6.2.3#6260)

10 years

1
0
0 / 0

[JBoss JIRA] (SRAMP-447) Re-split the installer into EAP 6.1 and 6.3

by Eric Wittmann (JIRA)

[ https://issues.jboss.org/browse/SRAMP-447?page=com.atlassian.jira.plugin.... ] Eric Wittmann commented on SRAMP-447: ------------------------------------- I had this same thought last time we talked about this - I was thinking maybe we could peek into the EAP distro itself to figure out what version it might be. Not sure the best way to do that in Ant though. But in any case, having something in ant that figured out the specific version would be better than splitting up the installers IMHO. > Re-split the installer into EAP 6.1 and 6.3 > ------------------------------------------- > > Key: SRAMP-447 > URL: https://issues.jboss.org/browse/SRAMP-447 > Project: S-RAMP > Issue Type: Task > Security Level: Public(Everyone can see) > Reporter: Brett Meyer > Assignee: Brett Meyer > Fix For: 0.5.0.Final > > > SRAMP-382 combined EAP 6.1 and 6.3 support. For the most part, that's fine -- no compile issues, etc. However, the installer needs split back up in order to provide the correct ModeShape distro, etc. -- This message was sent by Atlassian JIRA (v6.2.3#6260)

10 years

1
0
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

overlord-issues June 2014