ober0n wrote:
>
> Hi Ed, thanks for the quick reply, I will try the temporal
constraints as
> well.
>
> I haven't completed my testing yet but the sliding windows seems
to be
> working. Thanks!
>
> I am getting a strange problem of my program hanging. It gets all
the way
> past my "dispose()" of the StatefulKnowledgeSession and closing the
> session logger and to the end of my main(). Then it just sits
there. I'm
> thinking it's a bug in my rules but wanted to make sure this
wasn't a
> feature of Streams (maybe some thread kicked off to accept facts or
> something).
>
> If you could just confirm nothing in Drools fusion is supposed to
continue
> running, that would be great.
>
> Here are the significant snippets of my code:
> ...
> WorkingMemoryEntryPoint eventStream =
> ksession.getWorkingMemoryEntryPoint( "EventStream" );
> ...
> eventStream.insert(goodbye_message);
> Thread.sleep(10000);
> eventStream.insert(hello_message);
> ksession.fireAllRules();
> ksession.dispose();
> logger.close();
> } catch (Throwable t) {
> t.printStackTrace();
> }
> } // end main() <-- tracing through the code, I get past the
end of
> main() then see a "Source not found." in the Eclipse debugger
which seems
> to be looking for "Thread.exit() line: 604"
>
>
> The updated rule:
>
> declare Message
> @role( event )
> end
>
> rule "Hello World"
> when
> Message( status == Message.HELLO ) from entry-point
"EventStream"
> exists(Message( status == Message.GOODBYE ) over
window:time( 4s ) from
> entry-point "EventStream")
> then
>
>
System.out.println("**************************************************");
> System.out.println( "There was a GOODBYE message
near the HELLO
> message." );
>
>
System.out.println("**************************************************");
> end
>
> Thanks.
>
>
> Edson Tirelli-3 wrote:
>>
>> Although your rule should work, the best way to write your
rule would
>> be
>> using temporal constraints instead of sliding windows:
>>
>> rule "Goodbye before Hello World"
>> when
>> $m : Message( status == Message.HELLO )
>> exists( Message( status == Message.GOODBYE, this
>> before[0s,3s] $m ) )
>> then
>> System.out.println( "There was a GOODBYE
message before
>> the
>> HELLO
>> message." );
>> end
>>
>> Using "before" operator is not only much cheaper (in terms
of used
>> resources) than sliding windows, but it also allow the engine
to reason
>> over
>> the temporal constraints looking for special cases, like when
you use
>> negative patterns.
>>
>> I will look further into your case to check if I missed
anything on
>> the
>> sliding windows support, but using STREAM mode should work.
>>
>> If you can open a JIRA for me to raise a compilation error
when
>> compiling sliding windows using CLOUD mode, I appreciate. This
will allow
>> you to follow up my progress.
>>
>> []s
>> Edson
>>
>>
>> 2009/3/30 ober0n <
lili339@hotmail.com>
>>
>>>
>>> Hi Ed, no need to apologize, you have been invaluable in
my first steps
>>> towards Drooling :-D so thanks for all your help, it is
GREATLY
>>> appreciated
>>> :clap:.
>>>
>>> We have a few scenarios in mind but aren't really
implementing them yet,
>>> just trying to see if sliding windows works the way we
think it does. In
>>> the
>>> simple rule I wrote above, I basically want to check if
two facts are
>>> temporally close.
>>>
>>> Yes, you are correct. I didn't pay enough attention to the
manual and
>>> didn't
>>> use STREAM mode to enter in my facts. I will use the
manual insertion
>>> process found in "Example 2.10. Inserting facts into an
entry point" of
>>> section "2.3. Streams Support" to update my code. And, I
will update my
>>> rule
>>> to specify a "from entry-point <Specific Stream>".
>>>
>>> Also, could you comment on the simple rule I am using?
Does it look like
>>> it
>>> should work after I do the updates? Or is my logic
incorrect?
>>>
>>> Thanks again.
>>>
>>>
>>>
>>> Ober0n,
>>>
>>> Sorry for the delay on answering. I am on a trip with
limited internet
>>> connection.
>>> I am interested in your experience with the sliding
windows, since the
>>> tests are working. Maybe it is a scenario not covered by
the tests.
>>>
>>> In any case, what is probably happening is that you are
not
>>> configuring
>>> the engine to work in STREAM mode. The default mode is
CLOUD and it does
>>> not
>>> support sliding windows. It seems the engine is silently
failing in this
>>> case, when the compiler raise an error to warn the user.
>>>
>>> I just committed some docs on this subject:
>>>
>>>
>>>
https://hudson.jboss.org/hudson/job/drools/lastSuccessfulBuild/artifact/trunk/target/docs/drools-fusion/html/ch02.html#d0e1067
>>>
>>> (plz, wait for hudson to rebuild the docs or build docs
yourself).
>>>
>>> Feedback welcome. I will complement the sliding window
docs.
>>>
>>> []s
>>> Edson
>>>
>>> 2009/3/29 ober0n <
lili339@hotmail.com>
>>>
>>> >
>>> > Still trying to get sliding windows to work (basing
my code off of the
>>> > Eclipse supplied "Hello World" example). I don't
think I fully
>>> understand
>>> > how it works yet so I'm trying to simplify things
even further by
>>> writing
>>> > a
>>> > simple rule that is meant to say:
>>> >
>>> > if (current_message = "Hello" AND exists(
goodbye_message within
>>> > sliding_window(3 seconds) ))
>>> > then print("There was a GOODBYE message before the
HELLO message." )
>>> >
>>> > In other words: This rule should fire if the current
Hello World
>>> message
>>> > was
>>> > preceeded within 3 seconds by a goodbye message.
>>> >
>>> >
>>> >
>>>
---------------------------------------------------------------------------------------------------
>>> > I wrote a new rule for this:
>>> >
>>> > declare Message
>>> > @role( event )
>>> > end
>>> >
>>> > rule "Goodbye before Hello World"
>>> > when
>>> > Message( status == Message.HELLO )
>>> > exists( Message( status ==
Message.GOODBYE ) over
>>> > window:time( 3s ) )
>>> > then
>>> > System.out.println( "There was a
GOODBYE message before
>>> the
>>> > HELLO
>>> > message." );
>>> > end
>>> >
>>> >
>>> >
>>>
---------------------------------------------------------------------------------------------------
>>> >
>>> > To send the messages: (ksession is a
StatefulKnowledgeSession)
>>> >
>>> > ...
>>> >
ksession.insert(goodbye_message);
>>> > ksession.fireAllRules();
>>> >
>>> > Thread.sleep(5000);
>>> >
>>> > ksession.insert(hello_message);
>>> > ksession.fireAllRules();
>>> > ...
>>> >
>>> >
>>>
---------------------------------------------------------------------------------------------------
>>> >
>>> > I expect to get nothing back since I sent the Hello
message 5 seconds
>>> > after
>>> > the goodbye message (outside the sliding window of 3
seconds). But,
>>> for
>>> > some
>>> > reason the rule fires and I get one:
>>> >
>>> > "There was a GOODBYE message before the HELLO
message."
>>> >
>>> > Any help would be greatly appreciated.
>>> >
>>> > Thanks!
>>> > --
>>> > View this message in context:
>>> >
>>>
http://www.nabble.com/Trying-to-get-Sliding-Windows-to-work-tp22735051p22770318.html
>>> > Sent from the drools - user mailing list archive at
Nabble.com.
>>> >
>>> > _______________________________________________
>>> > rules-users mailing list
>>> >
rules-users@lists.jboss.org
>>> >
https://lists.jboss.org/mailman/listinfo/rules-users
>>> >
>>>
>>>
>>>
>>> --
>>> Edson Tirelli
>>> JBoss Drools Core Development
>>> JBoss, a division of Red Hat @
www.jboss.com
>>>
>>> _______________________________________________
>>> rules-users mailing list
>>>
rules-users@lists.jboss.org
>>>
https://lists.jboss.org/mailman/listinfo/rules-users
>>>
>>>
>>>
>>> --
>>> View this message in context:
>>>
http://www.nabble.com/Trying-to-get-Sliding-Windows-to-work-tp22735051p22785711.html
>>> Sent from the drools - user mailing list archive at
Nabble.com.
>>>
>>> _______________________________________________
>>> rules-users mailing list
>>>
rules-users@lists.jboss.org
>>>
https://lists.jboss.org/mailman/listinfo/rules-users
>>>
>>
>>
>>
>> --
>> Edson Tirelli
>> JBoss Drools Core Development
>> JBoss, a division of Red Hat @
www.jboss.com
>>
>> _______________________________________________
>> rules-users mailing list
>>
rules-users@lists.jboss.org
>>
https://lists.jboss.org/mailman/listinfo/rules-users
>>
>>
>
>
--