The reason why I've activated the logging was that some rules are not fired after inserting a special
amount of facts - in my case exactly 20.
Some more details here:
I work on an Event Correlation & Analysis OSS solution that's based on Grails & Drools 5.5.0-Final.
I'm using a stateful knowledge session and only call dispose() when the app is stopped - but all facts
are retracted. The functional testing works fine but as I've mentioned it before when I run the integration
testing it fails, because rules are not fired ('ClearAlertRule' is not fired) when I insert more than 20 facts.
I saw the errors in the drools log but I didn't know if they were relevant for my problem here.
I've attached two picts which document the right and the wrong behavior of the rule processing
- also I've listed the rules of my rulebase.
Has anybody an idea?
Cheers,
-markus
//------------------------------
rule 'UpdateAlertRule'
//------------------------------
dialect 'mvel'
salience 900
no-loop
when
_event : Event(eventClass == "Event",
_name:catalog['name'],
_category:catalog['category'],
_severity:catalog['severity'],
_state:catalog['state'],
_source:catalog['source'],
_subSource:catalog['subSource'],
_origin:catalog['origin'],
_subOrigin:catalog['subOrigin'],
_owner:catalog['owner'],
_description:catalog['description'],
_selector:("from Alert where " +
"name='" + catalog['name'] + "' " +
"and severity='" + catalog['severity'] + "' " +
"and not state='Closed'"
)
)
eval(isDuplicate(_event,"UpdateAlertRule",_selector) == true)
then
System.out.println("UpdateAlertRule is processed.")
EntityBuilder entityBuilder = new EntityBuilder();
entityBuilder.addProperty("modifiedBy","UpdateAlertRule");
entityBuilder.addProperty("counter",1);
AlertHandler alertHandler = new AlertHandler(entityBuilder.getProperties(),_selector);
alertHandler.update();
RuleLogHandler ruleLogHandler = new RuleLogHandler();
ruleLogHandler.create("UpdateAlertRule",_name);
end
//------------------------------
rule 'ClearAlertRule'
//------------------------------
dialect 'mvel'
salience 800
no-loop
when
_event : Event(eventClass == "Event",
_name:catalog['name'] contains 'Info',
_category:catalog['category'],
_severity:catalog['severity'] == 'Harmless',
_state:catalog['state'],
_source:catalog['source'],
_subSource:catalog['subSource'],
_origin:catalog['origin'],
_subOrigin:catalog['subOrigin'],
_owner:catalog['owner'],
_description:catalog['description'],
_selector:("from Alert where " +
"name like '%Error'" +
"and not severity='Harmless'" +
"and not state='Closed'"
)
)
then
System.out.println("ClearAlertRule is processed.")
EntityBuilder entityBuilder = new EntityBuilder();
entityBuilder.addProperty("modifiedBy","ClearAlertRule")
entityBuilder.addProperty("state","Closed");
AlertHandler alertHandler = new AlertHandler(entityBuilder.getProperties(),_selector);
alertHandler.update();
RuleLogHandler ruleLogHandler = new RuleLogHandler();
ruleLogHandler.create("ClearAlertRule",_name);
end
//------------------------------
rule 'CreateAlertRule'
//------------------------------
dialect 'mvel'
salience 700
no-loop
when
_event : Event(eventClass == "Event",
_name:catalog['name'],
_category:catalog['category'],
_severity:catalog['severity'],
_priority:catalog['priority'],
_state:catalog['state'],
_source:catalog['source'],
_subSource:catalog['subSource'],
_origin:catalog['origin'],
_subOrigin:catalog['subOrigin'],
_owner:catalog['owner'],
_description:catalog['description'],
_selector:("from Alert where " +
"name='" + catalog['name'] + "' " +
"and severity='" + catalog['severity'] + "' " +
"and not state='Closed'"
)
)
eval(isDuplicate(_event,"CreateAlertRule",_selector) == false)
then
System.out.println("CreateAlertRule is processed.");
EntityBuilder entityBuilder = new EntityBuilder();
entityBuilder.addProperty("modifiedBy","CreateAlertRule");
entityBuilder.addProperty("name",_name);
entityBuilder.addProperty("category",_category);
entityBuilder.addProperty("severity",_severity);
entityBuilder.addProperty("priority",_priority);
entityBuilder.addProperty("state",_state);
entityBuilder.addProperty("source",_source);
entityBuilder.addProperty("subSource",_subSource);
entityBuilder.addProperty("origin",_origin);
entityBuilder.addProperty("subOrigin",_subOrigin);
entityBuilder.addProperty("owner",_owner);
entityBuilder.addProperty("description",_description);
AlertHandler alertHandler = new AlertHandler(entityBuilder.getProperties(),_selector);
alertHandler.create();
RuleLogHandler ruleLogHandler = new RuleLogHandler();
ruleLogHandler.create("CreateAlertRule",_name);
end
//------------------------------
rule 'EventRetractionRule'
//------------------------------
dialect 'mvel'
salience 1
no-loop
when
_event : Event(eventClass == "Event",
_name:catalog['name'] not contains 'Timer'
)
then
System.out.println("EventRetractionRule is processed.");
retract(_event);
RuleLogHandler ruleLogHandler = new RuleLogHandler();
ruleLogHandler.create("EventRetractionRule",_name);
end
2014-02-25 14:00 GMT+01:00 Markus Schneider <markus.schneider73@gmail.com>:
-markusHi Davide,
thank you for the fast response. I've defined an DebugAgendaEventListener as it's described here:
Drools Docu 5.5.0-Final/Section 7.2/HelloWorld example.
http://docs.jboss.org/drools/release/5.5.0.Final/drools-expert-docs/html/index.html
Where can I find any docu about the config of the DebugAgendaEventListener?
Cheers,
2014-02-25 12:59 GMT+01:00 Davide Sottara <dsotty@gmail.com>:
You likely have configured a DebugAgendaEventListener, which logs agenda events (rules activated, fired, etc..)
on the standard error rather than the standard output. If you want a different behavior, remove the listener
and implement one of your own.
These are not errors anyway.
Davide
On 02/25/2014 09:40 AM, Markus Schneider wrote:
Do I have a serious problem here?Hi list,I see the following error msg in my drools log but I don't know how to interpret this.
Has anybody a clue?
Thanks in advance.
Cheers,
-markus
| Error ==>[AfterActivationFiredEvent: getActivation()=[Activation rule=UpdateAlertRule, act#=37, salience=900, tuple=[fact 0:19:184363445:184363445:19:DEFAULT:rapideca.plugins.rbm.entity.Event : 19]
], getKnowledgeRuntime()=org.drools.impl.StatefulKnowledgeSessionImpl@6dd4ab87]
| Error ==>[BeforeActivationFiredEvent: getActivation()=[Activation rule=EventRetractionRule, act#=36, salience=1, tuple=[fact 0:19:184363445:184363445:19:DEFAULT:rapideca.plugins.rbm.entity.Event : 19]
], getKnowledgeRuntime()=org.drools.impl.StatefulKnowledgeSessionImpl@6dd4ab87]
EventRetractionRule is processed.
| Error ==>[ObjectRetractedEventImpl: getFactHandle()=[fact 0:19:184363445:184363445:19:DEFAULT:rapideca.plugins.rbm.entity.Event : 19], getOldObject()=rapideca.plugins.rbm.entity.Event : 19, getKnowledgeRuntime()=org.drools.impl.StatefulKnowledgeSessionImpl@6dd4ab87, getPropagationContext()=PropagationContextImpl [activeActivations=0, dormantActivations=2, entryPoint=EntryPoint::DEFAULT, factHandle=[fact 0:19:184363445:184363445:19:DEFAULT:rapideca.plugins.rbm.entity.Event : 19], leftTuple=[fact 0:19:184363445:184363445:19:DEFAULT:rapideca.plugins.rbm.entity.Event : 19]
, originOffset=-1, propagationNumber=40, rule=[Rule name=EventRetractionRule, agendaGroup=MAIN, salience=1, no-loop=true], type=1]]
2014-02-25 08:59:03,524 [eventQueueReceiverJmsListenerContainer-1] INFO log.RuleLogHandler - RuleLog with id: 38 was successfully saved.
| Error ==>[AfterActivationFiredEvent: getActivation()=[Activation rule=EventRetractionRule, act#=36, salience=1, tuple=[fact 0:-1:184363445:184363445:19:null:null]
], getKnowledgeRuntime()=org.drools.impl.StatefulKnowledgeSessionImpl@6dd4ab87]
_______________________________________________ rules-users mailing list rules-users@lists.jboss.org https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________
rules-users mailing list
rules-users@lists.jboss.org
https://lists.jboss.org/mailman/listinfo/rules-users
_______________________________________________ rules-users mailing list rules-users@lists.jboss.org https://lists.jboss.org/mailman/listinfo/rules-users