4:40 a.m.
Uhm, is there anything blocking you from placing it where you would in Java 8?
E.g. src/main/resources/META-INF?
I don't think I have tried this combination (or I do not recall).
From the top of my head I don't know any JDK 9 limitation which
would forbid to use XML descriptors in this way.
I might be a bit rusty though; been
a while since I played with Java 9.
Please do report back with how this works for you :)
Matej
----- Original Message -----
From: "Alex Sviridov" <ooo_saturn7(a)mail.ru>
To: "Matej Novotny" <manovotn(a)redhat.com>
Sent: Monday, September 18, 2017 10:28:11 AM
Subject: Re[2]: [weld-dev] Weld and Java 9 JPMS
Thank you for your answer. I will try. But where should I place beans.xml
to make Weld read it if I use Java SE+ JPMS?
Best regards, Alex
>Понедельник, 18 сентября 2017, 8:10 +03:00 от Matej Novotny
><manovotn(a)redhat.com>:
>
>Hi Alex
>
>Back there we did some tests with earlier versions of Java 9 and eliminated
>some crucial problems.
>I think it should be possible to take *existing* app and run it on Java 9.
>
>However, creating a whole new modular project might present some additional
>challenges.
>Weld itself is not modularized (since it needs to run on Java 8), therefore
>you would need to list some extra "requires" in module-info.java for Weld.
>You also need to have reflection access allowed (we need to instantiate
>proxies etc) but last time I checked, it was by default enabled in JDK 9 wi
>th just warning showing up.
>Other than that, it might just work.
>
>To answer your other question - no, there is no tutorial, for there is no
>special difference between Weld and many other projects in regard to JDK 9.
>
>Matej
>
>----- Original Message -----
>> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
>> To: "weld-dev" < weld-dev(a)lists.jboss.org >
>> Sent: Sunday, September 17, 2017 3:25:49 PM
>> Subject: [weld-dev] Weld and Java 9 JPMS
>>
>> Hi all
>>
>> Could anyone provide information how weld works (if works) with Java 9
>> JPMS?
>> Is there any tutorial?
>>
>> Best regards, Alex
>>
>> _______________________________________________
>> weld-dev mailing list
>> weld-dev(a)lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/weld-dev
--
Alex Sviridov
5:17 a.m.
New subject: Weld and Java 9 JPMS
Hi Matej
I am just trying to make Weld work in Java 9 (JavaSE + JPMS).
I use the following jars as automatic modules:
weld-environment-common-3.0.2-SNAPSHOT.jar
weld-se-core-3.0.2-SNAPSHOT.jar
weld-se-shaded-3.0.2-SNAPSHOT.jar
weld-spi-3.0.SP1.jar
weld-core-impl-3.0.2-SNAPSHOT.jar
Is this right configuration? Or should I add/remove something.
Best regards, Alex
Понедельник, 18 сентября 2017, 12:41 +03:00 от Matej Novotny
<manovotn(a)redhat.com>:
Uhm, is there anything blocking you from placing it where you would in Java 8?
E.g. src/main/resources/META-INF?
I don't think I have tried this combination (or I do not recall).
From the top of my head I don't know any JDK 9 limitation which would forbid to use
XML descriptors in this way.
I might be a bit rusty though; been a while since I played with Java 9.
Please do report back with how this works for you :)
Matej
----- Original Message -----
> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> To: "Matej Novotny" < manovotn(a)redhat.com >
> Sent: Monday, September 18, 2017 10:28:11 AM
> Subject: Re[2]: [weld-dev] Weld and Java 9 JPMS
>
> Thank you for your answer. I will try. But where should I place beans.xml
> to make Weld read it if I use Java SE+ JPMS?
>
> Best regards, Alex
>
>
> >Понедельник, 18 сентября 2017, 8:10 +03:00 от Matej Novotny
> >< manovotn(a)redhat.com >:
> >
> >Hi Alex
> >
> >Back there we did some tests with earlier versions of Java 9 and eliminated
> >some crucial problems.
> >I think it should be possible to take *existing* app and run it on Java 9.
> >
> >However, creating a whole new modular project might present some additional
> >challenges.
> >Weld itself is not modularized (since it needs to run on Java 8), therefore
> >you would need to list some extra "requires" in module-info.java for
Weld.
> >You also need to have reflection access allowed (we need to instantiate
> >proxies etc) but last time I checked, it was by default enabled in JDK 9 wi
> >th just warning showing up.
> >Other than that, it might just work.
> >
> >To answer your other question - no, there is no tutorial, for there is no
> >special difference between Weld and many other projects in regard to JDK 9.
> >
> >Matej
> >
> >----- Original Message -----
> >> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> >> To: "weld-dev" < weld-dev(a)lists.jboss.org >
> >> Sent: Sunday, September 17, 2017 3:25:49 PM
> >> Subject: [weld-dev] Weld and Java 9 JPMS
> >>
> >> Hi all
> >>
> >> Could anyone provide information how weld works (if works) with Java 9
> >> JPMS?
> >> Is there any tutorial?
> >>
> >> Best regards, Alex
> >>
> >> _______________________________________________
> >> weld-dev mailing list
> >> weld-dev(a)lists.jboss.org
> >> https://lists.jboss.org/mailman/listinfo/weld-dev
>
>
> --
> Alex Sviridov
>
--
Alex Sviridov
6:18 a.m.
New subject: Weld and Java 9 JPMS
Hi,
if you are in SE, you should only need 'weld-se-shaded' artifact (as a JAR).
As it is "shaded", it brings along all the other parts of Weld you might need.
Matej
----- Original Message -----
From: "Alex Sviridov" <ooo_saturn7(a)mail.ru>
To: "weld-dev" <weld-dev(a)lists.jboss.org>
Sent: Monday, September 18, 2017 12:17:28 PM
Subject: Re: [weld-dev] Weld and Java 9 JPMS
Hi Matej
I am just trying to make Weld work in Java 9 (JavaSE + JPMS).
I use the following jars as automatic modules:
weld-environment-common-3.0.2-SNAPSHOT.jar
weld-se-core-3.0.2-SNAPSHOT.jar
weld-se-shaded-3.0.2-SNAPSHOT.jar
weld-spi-3.0.SP1.jar
weld-core-impl-3.0.2-SNAPSHOT.jar
Is this right configuration? Or should I add/remove something.
Best regards, Alex
Понедельник, 18 сентября 2017, 12:41 +03:00 от Matej Novotny
<manovotn(a)redhat.com>:
Uhm, is there anything blocking you from placing it where you would in Java
8?
E.g. src/main/resources/META-INF?
I don't think I have tried this combination (or I do not recall).
From the top of my head I don't know any JDK 9 limitation which would forbid
to use XML descriptors in this way.
I might be a bit rusty though; been a while since I played with Java 9.
Please do report back with how this works for you :)
Matej
----- Original Message -----
> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> To: "Matej Novotny" < manovotn(a)redhat.com >
> Sent: Monday, September 18, 2017 10:28:11 AM
> Subject: Re[2]: [weld-dev] Weld and Java 9 JPMS
>
> Thank you for your answer. I will try. But where should I place beans.xml
> to make Weld read it if I use Java SE+ JPMS?
>
> Best regards, Alex
>
>
> >Понедельник, 18 сентября 2017, 8:10 +03:00 от Matej Novotny
> >< manovotn(a)redhat.com >:
> >
> >Hi Alex
> >
> >Back there we did some tests with earlier versions of Java 9 and
> >eliminated
> >some crucial problems.
> >I think it should be possible to take *existing* app and run it on Java 9.
> >
> >However, creating a whole new modular project might present some
> >additional
> >challenges.
> >Weld itself is not modularized (since it needs to run on Java 8),
> >therefore
> >you would need to list some extra "requires" in module-info.java for
Weld.
> >You also need to have reflection access allowed (we need to instantiate
> >proxies etc) but last time I checked, it was by default enabled in JDK 9
> >wi
> >th just warning showing up.
> >Other than that, it might just work.
> >
> >To answer your other question - no, there is no tutorial, for there is no
> >special difference between Weld and many other projects in regard to JDK
> >9.
> >
> >Matej
> >
> >----- Original Message -----
> >> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> >> To: "weld-dev" < weld-dev(a)lists.jboss.org >
> >> Sent: Sunday, September 17, 2017 3:25:49 PM
> >> Subject: [weld-dev] Weld and Java 9 JPMS
> >>
> >> Hi all
> >>
> >> Could anyone provide information how weld works (if works) with Java 9
> >> JPMS?
> >> Is there any tutorial?
> >>
> >> Best regards, Alex
> >>
> >> _______________________________________________
> >> weld-dev mailing list
> >> weld-dev(a)lists.jboss.org
> >> https://lists.jboss.org/mailman/listinfo/weld-dev
>
>
> --
> Alex Sviridov
>
--
Alex Sviridov
_______________________________________________
weld-dev mailing list
weld-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/weld-dev
6:46 a.m.
New subject: Weld and Java 9 JPMS
Thank you for your answer.
Could anyone give any suggestion about the following?
I have my named module and weld-se-shaded as unnamed module.
In my module I have
module my.module {
requires weld.se.shaded;
exports com.foo;
}
#################################
package com.foo;
import javax.enterprise.context.ApplicationScoped;
import javax.inject.Inject;
@ApplicationScoped
public class NewClass {
@Inject
private NewBean bean;
public void doIt() {
bean.doIt();
}
}
#################################
package com.foo;
import javax.enterprise.context.Dependent;
@Dependent
public class NewBean {
public void doIt() {
System.out.println("I am doing it);
}
}
And this is the result
Sep 18, 2017 2:33:12 PM org.jboss.weld.bootstrap.WeldStartup <clinit>
INFO: WELD-000900: 3.0.2 (2017-09-18 08:49)
Sep 18, 2017 2:33:12 PM
org.jboss.weld.environment.deployment.discovery.ReflectionDiscoveryStrategy
processAnnotatedDiscovery
INFO: WELD-ENV-000014: Falling back to Java Reflection for
bean-discovery-mode="annotated" discovery. Add org.jboss:jandex to the classpath
to speed-up startup.
Sep 18, 2017 2:33:12 PM org.jboss.weld.bootstrap.WeldStartup startContainer
INFO: WELD-000101: Transactional services not available. Injection of @Inject
UserTransaction not available. Transactional observers will be invoked synchronously.
Exception in thread "main" java.lang.reflect.InaccessibleObjectException
at java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
at
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
at
java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
at java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:488)
at
java.base/java.util.concurrent.ForkJoinTask.getThrowableException(ForkJoinTask.java:590)
at java.base/java.util.concurrent.ForkJoinTask.get(ForkJoinTask.java:996)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.checkForExceptions(AbstractExecutorServices.java:72)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:58)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:66)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer.createClassBeans(ConcurrentBeanDeployer.java:65)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployment.createBeans(BeanDeployment.java:256)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldStartup.deployBeans(WeldStartup.java:422)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldBootstrap.deployBeans(WeldBootstrap.java:83)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.environment.se.Weld.initialize(Weld.java:789)
at my.module/com.foo.NewMain.main(NewMain.java:47)
Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make field private
com.foo.NewBean com.foo.NewClass.bean accessible: module my.module does not "opens
com.foo" to module weld.se.shaded
at
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:337)
at
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:281)
at java.base/java.lang.reflect.Field.checkCanSetAccessible(Field.java:176)
at java.base/java.lang.reflect.Field.setAccessible(Field.java:170)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.of(GetAccessibleCopyOfMember.java:38)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.run(GetAccessibleCopyOfMember.java:44)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.run(GetAccessibleCopyOfMember.java:26)
at java.base/java.security.AccessController.doPrivileged(Native Method)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.FieldInjectionPoint.<init>(FieldInjectionPoint.java:65)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.createFieldInjectionPoint(InjectionPointFactory.java:141)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.addFieldInjectionPoint(InjectionPointFactory.java:226)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.getFieldInjectionPoints(InjectionPointFactory.java:211)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.DefaultInjector.<init>(DefaultInjector.java:56)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.ResourceInjector.<init>(ResourceInjector.java:57)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.ResourceInjector.of(ResourceInjector.java:48)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.BeanInjectionTarget.<init>(BeanInjectionTarget.java:63)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.BeanInjectionTarget.createDefault(BeanInjectionTarget.java:47)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.manager.InjectionTargetFactoryImpl.chooseInjectionTarget(InjectionTargetFactoryImpl.java:139)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.manager.InjectionTargetFactoryImpl.createInjectionTarget(InjectionTargetFactoryImpl.java:88)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.ManagedBean.<init>(ManagedBean.java:100)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.ManagedBean.of(ManagedBean.java:80)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.AbstractBeanDeployer.createManagedBean(AbstractBeanDeployer.java:280)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployer.createClassBean(BeanDeployer.java:221)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$2.doWork(ConcurrentBeanDeployer.java:68)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$2.doWork(ConcurrentBeanDeployer.java:65)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:62)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:55)
at
java.base/java.util.concurrent.ForkJoinTask$AdaptedCallable.exec(ForkJoinTask.java:1431)
at java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:283)
at java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1603)
at
java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:175)
Понедельник, 18 сентября 2017, 14:18 +03:00 от Matej Novotny
<manovotn(a)redhat.com>:
Hi,
if you are in SE, you should only need 'weld-se-shaded' artifact (as a JAR).
As it is "shaded", it brings along all the other parts of Weld you might need.
Matej
----- Original Message -----
> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> To: "weld-dev" < weld-dev(a)lists.jboss.org >
> Sent: Monday, September 18, 2017 12:17:28 PM
> Subject: Re: [weld-dev] Weld and Java 9 JPMS
>
> Hi Matej
>
> I am just trying to make Weld work in Java 9 (JavaSE + JPMS).
>
> I use the following jars as automatic modules:
>
> weld-environment-common-3.0.2-SNAPSHOT.jar
> weld-se-core-3.0.2-SNAPSHOT.jar
> weld-se-shaded-3.0.2-SNAPSHOT.jar
> weld-spi-3.0.SP1.jar
> weld-core-impl-3.0.2-SNAPSHOT.jar
>
> Is this right configuration? Or should I add/remove something.
>
> Best regards, Alex
>
>
>
> Понедельник, 18 сентября 2017, 12:41 +03:00 от Matej Novotny
> < manovotn(a)redhat.com >:
>
> Uhm, is there anything blocking you from placing it where you would in Java
> 8?
> E.g. src/main/resources/META-INF?
>
> I don't think I have tried this combination (or I do not recall).
> From the top of my head I don't know any JDK 9 limitation which would forbid
> to use XML descriptors in this way.
> I might be a bit rusty though; been a while since I played with Java 9.
>
> Please do report back with how this works for you :)
> Matej
>
> ----- Original Message -----
> > From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > To: "Matej Novotny" < manovotn(a)redhat.com >
> > Sent: Monday, September 18, 2017 10:28:11 AM
> > Subject: Re[2]: [weld-dev] Weld and Java 9 JPMS
> >
> > Thank you for your answer. I will try. But where should I place beans.xml
> > to make Weld read it if I use Java SE+ JPMS?
> >
> > Best regards, Alex
> >
> >
> > >Понедельник, 18 сентября 2017, 8:10 +03:00 от Matej Novotny
> > >< manovotn(a)redhat.com >:
> > >
> > >Hi Alex
> > >
> > >Back there we did some tests with earlier versions of Java 9 and
> > >eliminated
> > >some crucial problems.
> > >I think it should be possible to take *existing* app and run it on Java 9.
> > >
> > >However, creating a whole new modular project might present some
> > >additional
> > >challenges.
> > >Weld itself is not modularized (since it needs to run on Java 8),
> > >therefore
> > >you would need to list some extra "requires" in module-info.java
for Weld.
> > >You also need to have reflection access allowed (we need to instantiate
> > >proxies etc) but last time I checked, it was by default enabled in JDK 9
> > >wi
> > >th just warning showing up.
> > >Other than that, it might just work.
> > >
> > >To answer your other question - no, there is no tutorial, for there is no
> > >special difference between Weld and many other projects in regard to JDK
> > >9.
> > >
> > >Matej
> > >
> > >----- Original Message -----
> > >> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > >> To: "weld-dev" < weld-dev(a)lists.jboss.org >
> > >> Sent: Sunday, September 17, 2017 3:25:49 PM
> > >> Subject: [weld-dev] Weld and Java 9 JPMS
> > >>
> > >> Hi all
> > >>
> > >> Could anyone provide information how weld works (if works) with Java 9
> > >> JPMS?
> > >> Is there any tutorial?
> > >>
> > >> Best regards, Alex
> > >>
> > >> _______________________________________________
> > >> weld-dev mailing list
> > >> weld-dev(a)lists.jboss.org
> > >> https://lists.jboss.org/mailman/listinfo/weld-dev
> >
> >
> > --
> > Alex Sviridov
> >
>
>
> --
> Alex Sviridov
>
> _______________________________________________
> weld-dev mailing list
> weld-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/weld-dev
--
Alex Sviridov
8:39 a.m.
New subject: Weld and Java 9 JPMS
From the exception you are getting, this line is important:
"Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make field
private com.foo.NewBean com.foo.NewClass.bean accessible: module my.module does not
"opens com.foo" to module weld.se.shaded"
Basically, Weld is not modularized (== lands in unnamed module) and it needs access to
your module so that it can create beans. E.g. you need to make sure unnamed module has
access to your module.
I think that by default in JDK 9 the access is intended so that all modules can read
unnamed module, but unnamed module can only read itself (simplified version).
Hence you want to break a few rules and force this to work in the opposite direction for
your module.
Matej
----- Original Message -----
From: "Alex Sviridov" <ooo_saturn7(a)mail.ru>
To: "weld-dev" <weld-dev(a)lists.jboss.org>
Sent: Monday, September 18, 2017 1:46:36 PM
Subject: Re: [weld-dev] Weld and Java 9 JPMS
Thank you for your answer.
Could anyone give any suggestion about the following?
I have my named module and weld-se-shaded as unnamed module.
In my module I have
module my.module {
requires weld.se.shaded;
exports com.foo;
}
#################################
package com.foo;
import javax.enterprise.context.ApplicationScoped;
import javax.inject.Inject;
@ApplicationScoped
public class NewClass {
@Inject
private NewBean bean;
public void doIt() {
bean.doIt();
}
}
#################################
package com.foo;
import javax.enterprise.context.Dependent;
@Dependent
public class NewBean {
public void doIt() {
System.out.println("I am doing it);
}
}
And this is the result
Sep 18, 2017 2:33:12 PM org.jboss.weld.bootstrap.WeldStartup <clinit>
INFO: WELD-000900: 3.0.2 (2017-09-18 08:49)
Sep 18, 2017 2:33:12 PM
org.jboss.weld.environment.deployment.discovery.ReflectionDiscoveryStrategy
processAnnotatedDiscovery
INFO: WELD-ENV-000014: Falling back to Java Reflection for
bean-discovery-mode="annotated" discovery. Add org.jboss:jandex to the
classpath to speed-up startup.
Sep 18, 2017 2:33:12 PM org.jboss.weld.bootstrap.WeldStartup startContainer
INFO: WELD-000101: Transactional services not available. Injection of @Inject
UserTransaction not available. Transactional observers will be invoked
synchronously.
Exception in thread "main" java.lang.reflect.InaccessibleObjectException
at
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
at
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
at
java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
at java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:488)
at
java.base/java.util.concurrent.ForkJoinTask.getThrowableException(ForkJoinTask.java:590)
at java.base/java.util.concurrent.ForkJoinTask.get(ForkJoinTask.java:996)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.checkForExceptions(AbstractExecutorServices.java:72)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:58)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:66)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer.createClassBeans(ConcurrentBeanDeployer.java:65)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployment.createBeans(BeanDeployment.java:256)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldStartup.deployBeans(WeldStartup.java:422)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldBootstrap.deployBeans(WeldBootstrap.java:83)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.environment.se.Weld.initialize(Weld.java:789)
at my.module/com.foo.NewMain.main(NewMain.java:47)
Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make
field private com.foo.NewBean com.foo.NewClass.bean accessible: module
my.module does not "opens com.foo" to module weld.se.shaded
at
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:337)
at
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:281)
at java.base/java.lang.reflect.Field.checkCanSetAccessible(Field.java:176)
at java.base/java.lang.reflect.Field.setAccessible(Field.java:170)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.of(GetAccessibleCopyOfMember.java:38)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.run(GetAccessibleCopyOfMember.java:44)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.run(GetAccessibleCopyOfMember.java:26)
at java.base/java.security.AccessController.doPrivileged(Native Method)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.FieldInjectionPoint.<init>(FieldInjectionPoint.java:65)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.createFieldInjectionPoint(InjectionPointFactory.java:141)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.addFieldInjectionPoint(InjectionPointFactory.java:226)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.getFieldInjectionPoints(InjectionPointFactory.java:211)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.DefaultInjector.<init>(DefaultInjector.java:56)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.ResourceInjector.<init>(ResourceInjector.java:57)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.ResourceInjector.of(ResourceInjector.java:48)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.BeanInjectionTarget.<init>(BeanInjectionTarget.java:63)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.BeanInjectionTarget.createDefault(BeanInjectionTarget.java:47)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.manager.InjectionTargetFactoryImpl.chooseInjectionTarget(InjectionTargetFactoryImpl.java:139)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.manager.InjectionTargetFactoryImpl.createInjectionTarget(InjectionTargetFactoryImpl.java:88)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.ManagedBean.<init>(ManagedBean.java:100)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.ManagedBean.of(ManagedBean.java:80)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.AbstractBeanDeployer.createManagedBean(AbstractBeanDeployer.java:280)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployer.createClassBean(BeanDeployer.java:221)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$2.doWork(ConcurrentBeanDeployer.java:68)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$2.doWork(ConcurrentBeanDeployer.java:65)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:62)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:55)
at
java.base/java.util.concurrent.ForkJoinTask$AdaptedCallable.exec(ForkJoinTask.java:1431)
at java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:283)
at
java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1603)
at
java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:175)
Понедельник, 18 сентября 2017, 14:18 +03:00 от Matej Novotny
<manovotn(a)redhat.com>:
Hi,
if you are in SE, you should only need 'weld-se-shaded' artifact (as a JAR).
As it is "shaded", it brings along all the other parts of Weld you might
need.
Matej
----- Original Message -----
> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> To: "weld-dev" < weld-dev(a)lists.jboss.org >
> Sent: Monday, September 18, 2017 12:17:28 PM
> Subject: Re: [weld-dev] Weld and Java 9 JPMS
>
> Hi Matej
>
> I am just trying to make Weld work in Java 9 (JavaSE + JPMS).
>
> I use the following jars as automatic modules:
>
> weld-environment-common-3.0.2-SNAPSHOT.jar
> weld-se-core-3.0.2-SNAPSHOT.jar
> weld-se-shaded-3.0.2-SNAPSHOT.jar
> weld-spi-3.0.SP1.jar
> weld-core-impl-3.0.2-SNAPSHOT.jar
>
> Is this right configuration? Or should I add/remove something.
>
> Best regards, Alex
>
>
>
> Понедельник, 18 сентября 2017, 12:41 +03:00 от Matej Novotny
> < manovotn(a)redhat.com >:
>
> Uhm, is there anything blocking you from placing it where you would in Java
> 8?
> E.g. src/main/resources/META-INF?
>
> I don't think I have tried this combination (or I do not recall).
> From the top of my head I don't know any JDK 9 limitation which would
> forbid
> to use XML descriptors in this way.
> I might be a bit rusty though; been a while since I played with Java 9.
>
> Please do report back with how this works for you :)
> Matej
>
> ----- Original Message -----
> > From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > To: "Matej Novotny" < manovotn(a)redhat.com >
> > Sent: Monday, September 18, 2017 10:28:11 AM
> > Subject: Re[2]: [weld-dev] Weld and Java 9 JPMS
> >
> > Thank you for your answer. I will try. But where should I place beans.xml
> > to make Weld read it if I use Java SE+ JPMS?
> >
> > Best regards, Alex
> >
> >
> > >Понедельник, 18 сентября 2017, 8:10 +03:00 от Matej Novotny
> > >< manovotn(a)redhat.com >:
> > >
> > >Hi Alex
> > >
> > >Back there we did some tests with earlier versions of Java 9 and
> > >eliminated
> > >some crucial problems.
> > >I think it should be possible to take *existing* app and run it on Java
> > >9.
> > >
> > >However, creating a whole new modular project might present some
> > >additional
> > >challenges.
> > >Weld itself is not modularized (since it needs to run on Java 8),
> > >therefore
> > >you would need to list some extra "requires" in module-info.java
for
> > >Weld.
> > >You also need to have reflection access allowed (we need to instantiate
> > >proxies etc) but last time I checked, it was by default enabled in JDK 9
> > >wi
> > >th just warning showing up.
> > >Other than that, it might just work.
> > >
> > >To answer your other question - no, there is no tutorial, for there is
> > >no
> > >special difference between Weld and many other projects in regard to JDK
> > >9.
> > >
> > >Matej
> > >
> > >----- Original Message -----
> > >> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > >> To: "weld-dev" < weld-dev(a)lists.jboss.org >
> > >> Sent: Sunday, September 17, 2017 3:25:49 PM
> > >> Subject: [weld-dev] Weld and Java 9 JPMS
> > >>
> > >> Hi all
> > >>
> > >> Could anyone provide information how weld works (if works) with Java
9
> > >> JPMS?
> > >> Is there any tutorial?
> > >>
> > >> Best regards, Alex
> > >>
> > >> _______________________________________________
> > >> weld-dev mailing list
> > >> weld-dev(a)lists.jboss.org
> > >> https://lists.jboss.org/mailman/listinfo/weld-dev
> >
> >
> > --
> > Alex Sviridov
> >
>
>
> --
> Alex Sviridov
>
> _______________________________________________
> weld-dev mailing list
> weld-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/weld-dev
--
Alex Sviridov
_______________________________________________
weld-dev mailing list
weld-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/weld-dev
9:29 a.m.
New subject: Weld and Java 9 JPMS
Yes, the line you highlighted is the most important. However, I don't agree with
you about some details. Let's see.
1) Please, take a look at the second table (module overview) here
https://labs.consol.de/development/2017/02/13/getting-started-with-java9-...
2) Weld is not unnamed module but automatic module as it is on module path
and I use it by name.
3) From that table (module overview) we see that both automatic and unnamed
modules can read application modules. If so, then why it doesn't?
Any suggestions?
Понедельник, 18 сентября 2017, 16:39 +03:00 от Matej Novotny
<manovotn(a)redhat.com>:
From the exception you are getting, this line is important:
"Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make field
private com.foo.NewBean com.foo.NewClass.bean accessible: module my.module does not
"opens com.foo" to module weld.se.shaded"
Basically, Weld is not modularized (== lands in unnamed module) and it needs access to
your module so that it can create beans. E.g. you need to make sure unnamed module has
access to your module.
I think that by default in JDK 9 the access is intended so that all modules can read
unnamed module, but unnamed module can only read itself (simplified version).
Hence you want to break a few rules and force this to work in the opposite direction for
your module.
Matej
----- Original Message -----
> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> To: "weld-dev" < weld-dev(a)lists.jboss.org >
> Sent: Monday, September 18, 2017 1:46:36 PM
> Subject: Re: [weld-dev] Weld and Java 9 JPMS
>
> Thank you for your answer.
>
> Could anyone give any suggestion about the following?
>
> I have my named module and weld-se-shaded as unnamed module.
> In my module I have
>
> module my.module {
> requires weld.se.shaded;
> exports com.foo;
> }
>
> #################################
> package com.foo;
>
> import javax.enterprise.context.ApplicationScoped;
> import javax.inject.Inject;
>
> @ApplicationScoped
> public class NewClass {
>
> @Inject
> private NewBean bean;
>
> public void doIt() {
> bean.doIt();
> }
>
> }
>
> #################################
> package com.foo;
>
> import javax.enterprise.context.Dependent;
>
> @Dependent
> public class NewBean {
>
> public void doIt() {
> System.out.println("I am doing it);
> }
> }
>
> And this is the result
>
> Sep 18, 2017 2:33:12 PM org.jboss.weld.bootstrap.WeldStartup <clinit>
> INFO: WELD-000900: 3.0.2 (2017-09-18 08:49)
> Sep 18, 2017 2:33:12 PM
> org.jboss.weld.environment.deployment.discovery.ReflectionDiscoveryStrategy
> processAnnotatedDiscovery
> INFO: WELD-ENV-000014: Falling back to Java Reflection for
> bean-discovery-mode="annotated" discovery. Add org.jboss:jandex to the
> classpath to speed-up startup.
> Sep 18, 2017 2:33:12 PM org.jboss.weld.bootstrap.WeldStartup startContainer
> INFO: WELD-000101: Transactional services not available. Injection of @Inject
> UserTransaction not available. Transactional observers will be invoked
> synchronously.
> Exception in thread "main" java.lang.reflect.InaccessibleObjectException
> at
> java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native
> Method)
> at
>
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
> at
>
java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
> at java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:488)
> at
>
java.base/java.util.concurrent.ForkJoinTask.getThrowableException(ForkJoinTask.java:590)
> at java.base/java.util.concurrent.ForkJoinTask.get(ForkJoinTask.java:996)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.checkForExceptions(AbstractExecutorServices.java:72)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:58)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:66)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer.createClassBeans(ConcurrentBeanDeployer.java:65)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployment.createBeans(BeanDeployment.java:256)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldStartup.deployBeans(WeldStartup.java:422)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldBootstrap.deployBeans(WeldBootstrap.java:83)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.environment.se.Weld.initialize(Weld.java:789)
> at my.module/com.foo.NewMain.main(NewMain.java:47)
> Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make
> field private com.foo.NewBean com.foo.NewClass.bean accessible: module
> my.module does not "opens com.foo" to module weld.se.shaded
> at
>
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:337)
> at
>
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:281)
> at java.base/java.lang.reflect.Field.checkCanSetAccessible(Field.java:176)
> at java.base/java.lang.reflect.Field.setAccessible(Field.java:170)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.of(GetAccessibleCopyOfMember.java:38)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.run(GetAccessibleCopyOfMember.java:44)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.run(GetAccessibleCopyOfMember.java:26)
> at java.base/java.security.AccessController.doPrivileged(Native Method)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.FieldInjectionPoint.<init>(FieldInjectionPoint.java:65)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.createFieldInjectionPoint(InjectionPointFactory.java:141)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.addFieldInjectionPoint(InjectionPointFactory.java:226)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.getFieldInjectionPoints(InjectionPointFactory.java:211)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.DefaultInjector.<init>(DefaultInjector.java:56)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.ResourceInjector.<init>(ResourceInjector.java:57)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.ResourceInjector.of(ResourceInjector.java:48)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.BeanInjectionTarget.<init>(BeanInjectionTarget.java:63)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.BeanInjectionTarget.createDefault(BeanInjectionTarget.java:47)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.manager.InjectionTargetFactoryImpl.chooseInjectionTarget(InjectionTargetFactoryImpl.java:139)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.manager.InjectionTargetFactoryImpl.createInjectionTarget(InjectionTargetFactoryImpl.java:88)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.ManagedBean.<init>(ManagedBean.java:100)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.ManagedBean.of(ManagedBean.java:80)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.AbstractBeanDeployer.createManagedBean(AbstractBeanDeployer.java:280)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployer.createClassBean(BeanDeployer.java:221)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$2.doWork(ConcurrentBeanDeployer.java:68)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$2.doWork(ConcurrentBeanDeployer.java:65)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:62)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:55)
> at
>
java.base/java.util.concurrent.ForkJoinTask$AdaptedCallable.exec(ForkJoinTask.java:1431)
> at java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:283)
> at
> java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1603)
> at
>
java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:175)
>
>
>
>
>
>
>
> Понедельник, 18 сентября 2017, 14:18 +03:00 от Matej Novotny
> < manovotn(a)redhat.com >:
>
> Hi,
>
> if you are in SE, you should only need 'weld-se-shaded' artifact (as a JAR).
> As it is "shaded", it brings along all the other parts of Weld you might
> need.
>
> Matej
>
>
> ----- Original Message -----
> > From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > To: "weld-dev" < weld-dev(a)lists.jboss.org >
> > Sent: Monday, September 18, 2017 12:17:28 PM
> > Subject: Re: [weld-dev] Weld and Java 9 JPMS
> >
> > Hi Matej
> >
> > I am just trying to make Weld work in Java 9 (JavaSE + JPMS).
> >
> > I use the following jars as automatic modules:
> >
> > weld-environment-common-3.0.2-SNAPSHOT.jar
> > weld-se-core-3.0.2-SNAPSHOT.jar
> > weld-se-shaded-3.0.2-SNAPSHOT.jar
> > weld-spi-3.0.SP1.jar
> > weld-core-impl-3.0.2-SNAPSHOT.jar
> >
> > Is this right configuration? Or should I add/remove something.
> >
> > Best regards, Alex
> >
> >
> >
> > Понедельник, 18 сентября 2017, 12:41 +03:00 от Matej Novotny
> > < manovotn(a)redhat.com >:
> >
> > Uhm, is there anything blocking you from placing it where you would in Java
> > 8?
> > E.g. src/main/resources/META-INF?
> >
> > I don't think I have tried this combination (or I do not recall).
> > From the top of my head I don't know any JDK 9 limitation which would
> > forbid
> > to use XML descriptors in this way.
> > I might be a bit rusty though; been a while since I played with Java 9.
> >
> > Please do report back with how this works for you :)
> > Matej
> >
> > ----- Original Message -----
> > > From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > > To: "Matej Novotny" < manovotn(a)redhat.com >
> > > Sent: Monday, September 18, 2017 10:28:11 AM
> > > Subject: Re[2]: [weld-dev] Weld and Java 9 JPMS
> > >
> > > Thank you for your answer. I will try. But where should I place beans.xml
> > > to make Weld read it if I use Java SE+ JPMS?
> > >
> > > Best regards, Alex
> > >
> > >
> > > >Понедельник, 18 сентября 2017, 8:10 +03:00 от Matej Novotny
> > > >< manovotn(a)redhat.com >:
> > > >
> > > >Hi Alex
> > > >
> > > >Back there we did some tests with earlier versions of Java 9 and
> > > >eliminated
> > > >some crucial problems.
> > > >I think it should be possible to take *existing* app and run it on
Java
> > > >9.
> > > >
> > > >However, creating a whole new modular project might present some
> > > >additional
> > > >challenges.
> > > >Weld itself is not modularized (since it needs to run on Java 8),
> > > >therefore
> > > >you would need to list some extra "requires" in
module-info.java for
> > > >Weld.
> > > >You also need to have reflection access allowed (we need to
instantiate
> > > >proxies etc) but last time I checked, it was by default enabled in JDK
9
> > > >wi
> > > >th just warning showing up.
> > > >Other than that, it might just work.
> > > >
> > > >To answer your other question - no, there is no tutorial, for there is
> > > >no
> > > >special difference between Weld and many other projects in regard to
JDK
> > > >9.
> > > >
> > > >Matej
> > > >
> > > >----- Original Message -----
> > > >> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > > >> To: "weld-dev" < weld-dev(a)lists.jboss.org >
> > > >> Sent: Sunday, September 17, 2017 3:25:49 PM
> > > >> Subject: [weld-dev] Weld and Java 9 JPMS
> > > >>
> > > >> Hi all
> > > >>
> > > >> Could anyone provide information how weld works (if works) with
Java 9
> > > >> JPMS?
> > > >> Is there any tutorial?
> > > >>
> > > >> Best regards, Alex
> > > >>
> > > >> _______________________________________________
> > > >> weld-dev mailing list
> > > >> weld-dev(a)lists.jboss.org
> > > >> https://lists.jboss.org/mailman/listinfo/weld-dev
> > >
> > >
> > > --
> > > Alex Sviridov
> > >
> >
> >
> > --
> > Alex Sviridov
> >
> > _______________________________________________
> > weld-dev mailing list
> > weld-dev(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/weld-dev
>
>
> --
> Alex Sviridov
>
> _______________________________________________
> weld-dev mailing list
> weld-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/weld-dev
--
Alex Sviridov
10:23 a.m.
New subject: Weld and Java 9 JPMS
So, here I am.
I changed my.module from
my.module {
requires weld.se.shaded;
exports com.foo;
}
to
my.module {
requires weld.se.shaded;
opens com.foo;
}
And got the following (see below). It seems that Weld can't now work with JPMS.
What will Weld developers say?
Exception in thread "main" org.jboss.weld.exceptions.WeldException: WELD-001524:
Unable to load proxy class for bean Implicit Bean [javax.enterprise.event.Event] with
qualifiers [@Default] with class interface javax.enterprise.event.Event using classloader
jdk.internal.loader.ClassLoaders$AppClassLoader@6b2fad11
at java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
at
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
at
java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
at java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:488)
at
java.base/java.util.concurrent.ForkJoinTask.getThrowableException(ForkJoinTask.java:587)
at java.base/java.util.concurrent.ForkJoinTask.get(ForkJoinTask.java:996)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.checkForExceptions(AbstractExecutorServices.java:72)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:58)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:66)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer.doAfterBeanDiscovery(ConcurrentBeanDeployer.java:88)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployment.afterBeanDiscovery(BeanDeployment.java:268)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldStartup.deployBeans(WeldStartup.java:466)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldBootstrap.deployBeans(WeldBootstrap.java:83)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.environment.se.Weld.initialize(Weld.java:789)
at my.module/com.foo.NewMain.main(NewMain.java:47)
Caused by: org.jboss.weld.exceptions.WeldException: WELD-001524: Unable to load proxy
class for bean Implicit Bean [javax.enterprise.event.Event] with qualifiers [@Default]
with class interface javax.enterprise.event.Event using classloader
jdk.internal.loader.ClassLoaders$AppClassLoader@6b2fad11
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.getProxyClass(ProxyFactory.java:389)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.builtin.AbstractFacadeBean.initializeAfterBeanDiscovery(AbstractFacadeBean.java:61)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$AfterBeanDiscoveryInitializerFactory.doWork(ConcurrentBeanDeployer.java:111)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$AfterBeanDiscoveryInitializerFactory.doWork(ConcurrentBeanDeployer.java:102)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:62)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:55)
at
java.base/java.util.concurrent.ForkJoinTask$AdaptedCallable.exec(ForkJoinTask.java:1431)
at java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:283)
at java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1603)
at
java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:175)
Caused by: java.lang.ExceptionInInitializerError
at java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
at
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
at
java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
at java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:488)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.newClassFile(ProxyFactory.java:496)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.createProxyClass(ProxyFactory.java:455)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.getProxyClass(ProxyFactory.java:381)
... 9 more
Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make protected final
java.lang.Class java.lang.ClassLoader.defineClass(java.lang.String,byte[],int,int) throws
java.lang.ClassFormatError accessible: module java.base does not "opens
java.lang" to module weld.se.shaded
at
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:337)
at
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:281)
at java.base/java.lang.reflect.Method.checkCanSetAccessible(Method.java:198)
at java.base/java.lang.reflect.Method.setAccessible(Method.java:192)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.classfilewriter.ClassFile$1.run(ClassFile.java:256)
at java.base/java.security.AccessController.doPrivileged(Native Method)
at
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.classfilewriter.ClassFile.<clinit>(ClassFile.java:251)
... 16 more
Понедельник, 18 сентября 2017, 16:39 +03:00 от Matej Novotny
<manovotn(a)redhat.com>:
From the exception you are getting, this line is important:
"Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make field
private com.foo.NewBean com.foo.NewClass.bean accessible: module my.module does not
"opens com.foo" to module weld.se.shaded"
Basically, Weld is not modularized (== lands in unnamed module) and it needs access to
your module so that it can create beans. E.g. you need to make sure unnamed module has
access to your module.
I think that by default in JDK 9 the access is intended so that all modules can read
unnamed module, but unnamed module can only read itself (simplified version).
Hence you want to break a few rules and force this to work in the opposite direction for
your module.
Matej
----- Original Message -----
> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> To: "weld-dev" < weld-dev(a)lists.jboss.org >
> Sent: Monday, September 18, 2017 1:46:36 PM
> Subject: Re: [weld-dev] Weld and Java 9 JPMS
>
> Thank you for your answer.
>
> Could anyone give any suggestion about the following?
>
> I have my named module and weld-se-shaded as unnamed module.
> In my module I have
>
> module my.module {
> requires weld.se.shaded;
> exports com.foo;
> }
>
> #################################
> package com.foo;
>
> import javax.enterprise.context.ApplicationScoped;
> import javax.inject.Inject;
>
> @ApplicationScoped
> public class NewClass {
>
> @Inject
> private NewBean bean;
>
> public void doIt() {
> bean.doIt();
> }
>
> }
>
> #################################
> package com.foo;
>
> import javax.enterprise.context.Dependent;
>
> @Dependent
> public class NewBean {
>
> public void doIt() {
> System.out.println("I am doing it);
> }
> }
>
> And this is the result
>
> Sep 18, 2017 2:33:12 PM org.jboss.weld.bootstrap.WeldStartup <clinit>
> INFO: WELD-000900: 3.0.2 (2017-09-18 08:49)
> Sep 18, 2017 2:33:12 PM
> org.jboss.weld.environment.deployment.discovery.ReflectionDiscoveryStrategy
> processAnnotatedDiscovery
> INFO: WELD-ENV-000014: Falling back to Java Reflection for
> bean-discovery-mode="annotated" discovery. Add org.jboss:jandex to the
> classpath to speed-up startup.
> Sep 18, 2017 2:33:12 PM org.jboss.weld.bootstrap.WeldStartup startContainer
> INFO: WELD-000101: Transactional services not available. Injection of @Inject
> UserTransaction not available. Transactional observers will be invoked
> synchronously.
> Exception in thread "main" java.lang.reflect.InaccessibleObjectException
> at
> java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native
> Method)
> at
>
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
> at
>
java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
> at java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:488)
> at
>
java.base/java.util.concurrent.ForkJoinTask.getThrowableException(ForkJoinTask.java:590)
> at java.base/java.util.concurrent.ForkJoinTask.get(ForkJoinTask.java:996)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.checkForExceptions(AbstractExecutorServices.java:72)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:58)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:66)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer.createClassBeans(ConcurrentBeanDeployer.java:65)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployment.createBeans(BeanDeployment.java:256)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldStartup.deployBeans(WeldStartup.java:422)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldBootstrap.deployBeans(WeldBootstrap.java:83)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.environment.se.Weld.initialize(Weld.java:789)
> at my.module/com.foo.NewMain.main(NewMain.java:47)
> Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make
> field private com.foo.NewBean com.foo.NewClass.bean accessible: module
> my.module does not "opens com.foo" to module weld.se.shaded
> at
>
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:337)
> at
>
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:281)
> at java.base/java.lang.reflect.Field.checkCanSetAccessible(Field.java:176)
> at java.base/java.lang.reflect.Field.setAccessible(Field.java:170)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.of(GetAccessibleCopyOfMember.java:38)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.run(GetAccessibleCopyOfMember.java:44)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.run(GetAccessibleCopyOfMember.java:26)
> at java.base/java.security.AccessController.doPrivileged(Native Method)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.FieldInjectionPoint.<init>(FieldInjectionPoint.java:65)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.createFieldInjectionPoint(InjectionPointFactory.java:141)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.addFieldInjectionPoint(InjectionPointFactory.java:226)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.getFieldInjectionPoints(InjectionPointFactory.java:211)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.DefaultInjector.<init>(DefaultInjector.java:56)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.ResourceInjector.<init>(ResourceInjector.java:57)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.ResourceInjector.of(ResourceInjector.java:48)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.BeanInjectionTarget.<init>(BeanInjectionTarget.java:63)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.BeanInjectionTarget.createDefault(BeanInjectionTarget.java:47)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.manager.InjectionTargetFactoryImpl.chooseInjectionTarget(InjectionTargetFactoryImpl.java:139)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.manager.InjectionTargetFactoryImpl.createInjectionTarget(InjectionTargetFactoryImpl.java:88)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.ManagedBean.<init>(ManagedBean.java:100)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.ManagedBean.of(ManagedBean.java:80)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.AbstractBeanDeployer.createManagedBean(AbstractBeanDeployer.java:280)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployer.createClassBean(BeanDeployer.java:221)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$2.doWork(ConcurrentBeanDeployer.java:68)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$2.doWork(ConcurrentBeanDeployer.java:65)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:62)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:55)
> at
>
java.base/java.util.concurrent.ForkJoinTask$AdaptedCallable.exec(ForkJoinTask.java:1431)
> at java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:283)
> at
> java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1603)
> at
>
java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:175)
>
>
>
>
>
>
>
> Понедельник, 18 сентября 2017, 14:18 +03:00 от Matej Novotny
> < manovotn(a)redhat.com >:
>
> Hi,
>
> if you are in SE, you should only need 'weld-se-shaded' artifact (as a JAR).
> As it is "shaded", it brings along all the other parts of Weld you might
> need.
>
> Matej
>
>
> ----- Original Message -----
> > From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > To: "weld-dev" < weld-dev(a)lists.jboss.org >
> > Sent: Monday, September 18, 2017 12:17:28 PM
> > Subject: Re: [weld-dev] Weld and Java 9 JPMS
> >
> > Hi Matej
> >
> > I am just trying to make Weld work in Java 9 (JavaSE + JPMS).
> >
> > I use the following jars as automatic modules:
> >
> > weld-environment-common-3.0.2-SNAPSHOT.jar
> > weld-se-core-3.0.2-SNAPSHOT.jar
> > weld-se-shaded-3.0.2-SNAPSHOT.jar
> > weld-spi-3.0.SP1.jar
> > weld-core-impl-3.0.2-SNAPSHOT.jar
> >
> > Is this right configuration? Or should I add/remove something.
> >
> > Best regards, Alex
> >
> >
> >
> > Понедельник, 18 сентября 2017, 12:41 +03:00 от Matej Novotny
> > < manovotn(a)redhat.com >:
> >
> > Uhm, is there anything blocking you from placing it where you would in Java
> > 8?
> > E.g. src/main/resources/META-INF?
> >
> > I don't think I have tried this combination (or I do not recall).
> > From the top of my head I don't know any JDK 9 limitation which would
> > forbid
> > to use XML descriptors in this way.
> > I might be a bit rusty though; been a while since I played with Java 9.
> >
> > Please do report back with how this works for you :)
> > Matej
> >
> > ----- Original Message -----
> > > From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > > To: "Matej Novotny" < manovotn(a)redhat.com >
> > > Sent: Monday, September 18, 2017 10:28:11 AM
> > > Subject: Re[2]: [weld-dev] Weld and Java 9 JPMS
> > >
> > > Thank you for your answer. I will try. But where should I place beans.xml
> > > to make Weld read it if I use Java SE+ JPMS?
> > >
> > > Best regards, Alex
> > >
> > >
> > > >Понедельник, 18 сентября 2017, 8:10 +03:00 от Matej Novotny
> > > >< manovotn(a)redhat.com >:
> > > >
> > > >Hi Alex
> > > >
> > > >Back there we did some tests with earlier versions of Java 9 and
> > > >eliminated
> > > >some crucial problems.
> > > >I think it should be possible to take *existing* app and run it on
Java
> > > >9.
> > > >
> > > >However, creating a whole new modular project might present some
> > > >additional
> > > >challenges.
> > > >Weld itself is not modularized (since it needs to run on Java 8),
> > > >therefore
> > > >you would need to list some extra "requires" in
module-info.java for
> > > >Weld.
> > > >You also need to have reflection access allowed (we need to
instantiate
> > > >proxies etc) but last time I checked, it was by default enabled in JDK
9
> > > >wi
> > > >th just warning showing up.
> > > >Other than that, it might just work.
> > > >
> > > >To answer your other question - no, there is no tutorial, for there is
> > > >no
> > > >special difference between Weld and many other projects in regard to
JDK
> > > >9.
> > > >
> > > >Matej
> > > >
> > > >----- Original Message -----
> > > >> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > > >> To: "weld-dev" < weld-dev(a)lists.jboss.org >
> > > >> Sent: Sunday, September 17, 2017 3:25:49 PM
> > > >> Subject: [weld-dev] Weld and Java 9 JPMS
> > > >>
> > > >> Hi all
> > > >>
> > > >> Could anyone provide information how weld works (if works) with
Java 9
> > > >> JPMS?
> > > >> Is there any tutorial?
> > > >>
> > > >> Best regards, Alex
> > > >>
> > > >> _______________________________________________
> > > >> weld-dev mailing list
> > > >> weld-dev(a)lists.jboss.org
> > > >> https://lists.jboss.org/mailman/listinfo/weld-dev
> > >
> > >
> > > --
> > > Alex Sviridov
> > >
> >
> >
> > --
> > Alex Sviridov
> >
> > _______________________________________________
> > weld-dev mailing list
> > weld-dev(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/weld-dev
>
>
> --
> Alex Sviridov
>
> _______________________________________________
> weld-dev mailing list
> weld-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/weld-dev
--
Alex Sviridov
2:22 a.m.
New subject: Weld and Java 9 JPMS
1) Please, take a look at the second table (module overview) here
https://labs.consol.de/development/2017/02/13/getting-started-with-java9-...
Did that, the article looks like there is finally some solid material on modules.
2) Weld is not unnamed module but automatic module as it is on module
path
and I use it by name.
Yea, you are right, my bad. I meant automatic module OFC.
3) From that table (module overview) we see that both automatic and
unnamed
modules can read application modules. If so, then why it doesn't?
I suppose you already got your answer on StackOverflow[1], right?
To add on top of that, if you `exports` package - you only expose public things in there.
For Weld to create proxies of your beans, we need to go deeper and allow reflections
access which may mean accessing private/protected stuff (such as your @Inject private
NewBean bean).
Java 9 doesn't like that and requires you to `opens` the package for this kind of
work.
And got the following (see below). It seems that Weld can't now
work with
JPMS.
What will Weld developers say?
From the SO question I guess you got it working in the end.
If
you have any other questions, feel free to contact us again.
I'll try to test some JDK 9 project myself to refresh my memory so that I can be of
more help next time :)
Matej
_________________________________________________________________________-
[1] https://stackoverflow.com/questions/46282509
----- Original Message -----
> From: "Alex Sviridov" <ooo_saturn7(a)mail.ru>
> To: "weld-dev" <weld-dev(a)lists.jboss.org>
> Sent: Monday, September 18, 2017 5:23:30 PM
> Subject: Re: [weld-dev] Weld and Java 9 JPMS
>
> So, here I am.
> I changed my.module from
> my.module {
> requires weld.se.shaded;
> exports com.foo;
> }
> to
> my.module {
> requires weld.se.shaded;
> opens com.foo;
> }
>
And got the following (see below). It seems that Weld can't now
work with
JPMS.
What will Weld developers say?
>
> Exception in thread "main" org.jboss.weld.exceptions.WeldException:
> WELD-001524: Unable to load proxy class for bean Implicit Bean
> [javax.enterprise.event.Event] with qualifiers [@Default] with class
> interface javax.enterprise.event.Event using classloader
> jdk.internal.loader.ClassLoaders$AppClassLoader@6b2fad11
> at
> java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native
> Method)
> at
>
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
> at
>
java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
> at java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:488)
> at
>
java.base/java.util.concurrent.ForkJoinTask.getThrowableException(ForkJoinTask.java:587)
> at java.base/java.util.concurrent.ForkJoinTask.get(ForkJoinTask.java:996)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.checkForExceptions(AbstractExecutorServices.java:72)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:58)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:66)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer.doAfterBeanDiscovery(ConcurrentBeanDeployer.java:88)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployment.afterBeanDiscovery(BeanDeployment.java:268)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldStartup.deployBeans(WeldStartup.java:466)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldBootstrap.deployBeans(WeldBootstrap.java:83)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.environment.se.Weld.initialize(Weld.java:789)
> at my.module/com.foo.NewMain.main(NewMain.java:47)
> Caused by: org.jboss.weld.exceptions.WeldException: WELD-001524: Unable to
> load proxy class for bean Implicit Bean [javax.enterprise.event.Event] with
> qualifiers [@Default] with class interface javax.enterprise.event.Event
> using classloader jdk.internal.loader.ClassLoaders$AppClassLoader@6b2fad11
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.getProxyClass(ProxyFactory.java:389)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.builtin.AbstractFacadeBean.initializeAfterBeanDiscovery(AbstractFacadeBean.java:61)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$AfterBeanDiscoveryInitializerFactory.doWork(ConcurrentBeanDeployer.java:111)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$AfterBeanDiscoveryInitializerFactory.doWork(ConcurrentBeanDeployer.java:102)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:62)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:55)
> at
>
java.base/java.util.concurrent.ForkJoinTask$AdaptedCallable.exec(ForkJoinTask.java:1431)
> at java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:283)
> at
> java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1603)
> at
>
java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:175)
> Caused by: java.lang.ExceptionInInitializerError
> at
> java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native
> Method)
> at
>
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
> at
>
java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
> at java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:488)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.newClassFile(ProxyFactory.java:496)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.createProxyClass(ProxyFactory.java:455)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.getProxyClass(ProxyFactory.java:381)
> ... 9 more
> Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make
> protected final java.lang.Class
> java.lang.ClassLoader.defineClass(java.lang.String,byte[],int,int) throws
> java.lang.ClassFormatError accessible: module java.base does not "opens
> java.lang" to module weld.se.shaded
> at
>
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:337)
> at
>
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:281)
> at java.base/java.lang.reflect.Method.checkCanSetAccessible(Method.java:198)
> at java.base/java.lang.reflect.Method.setAccessible(Method.java:192)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.classfilewriter.ClassFile$1.run(ClassFile.java:256)
> at java.base/java.security.AccessController.doPrivileged(Native Method)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.classfilewriter.ClassFile.<clinit>(ClassFile.java:251)
> ... 16 more
>
>
>
>
>
>
> Понедельник, 18 сентября 2017, 16:39 +03:00 от Matej Novotny
> <manovotn(a)redhat.com>:
>
> From the exception you are getting, this line is important:
>
> "Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make
> field private com.foo.NewBean com.foo.NewClass.bean accessible: module
> my.module does not "opens com.foo" to module weld.se.shaded"
>
> Basically, Weld is not modularized (== lands in unnamed module) and it needs
> access to your module so that it can create beans. E.g. you need to make
> sure unnamed module has access to your module.
> I think that by default in JDK 9 the access is intended so that all modules
> can read unnamed module, but unnamed module can only read itself (simplified
> version).
> Hence you want to break a few rules and force this to work in the opposite
> direction for your module.
>
> Matej
>
>
> ----- Original Message -----
> > From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > To: "weld-dev" < weld-dev(a)lists.jboss.org >
> > Sent: Monday, September 18, 2017 1:46:36 PM
> > Subject: Re: [weld-dev] Weld and Java 9 JPMS
> >
> > Thank you for your answer.
> >
> > Could anyone give any suggestion about the following?
> >
> > I have my named module and weld-se-shaded as unnamed module.
> > In my module I have
> >
> > module my.module {
> > requires weld.se.shaded;
> > exports com.foo;
> > }
> >
> > #################################
> > package com.foo;
> >
> > import javax.enterprise.context.ApplicationScoped;
> > import javax.inject.Inject;
> >
> > @ApplicationScoped
> > public class NewClass {
> >
> > @Inject
> > private NewBean bean;
> >
> > public void doIt() {
> > bean.doIt();
> > }
> >
> > }
> >
> > #################################
> > package com.foo;
> >
> > import javax.enterprise.context.Dependent;
> >
> > @Dependent
> > public class NewBean {
> >
> > public void doIt() {
> > System.out.println("I am doing it);
> > }
> > }
> >
> > And this is the result
> >
> > Sep 18, 2017 2:33:12 PM org.jboss.weld.bootstrap.WeldStartup <clinit>
> > INFO: WELD-000900: 3.0.2 (2017-09-18 08:49)
> > Sep 18, 2017 2:33:12 PM
> > org.jboss.weld.environment.deployment.discovery.ReflectionDiscoveryStrategy
> > processAnnotatedDiscovery
> > INFO: WELD-ENV-000014: Falling back to Java Reflection for
> > bean-discovery-mode="annotated" discovery. Add org.jboss:jandex to
the
> > classpath to speed-up startup.
> > Sep 18, 2017 2:33:12 PM org.jboss.weld.bootstrap.WeldStartup startContainer
> > INFO: WELD-000101: Transactional services not available. Injection of
> > @Inject
> > UserTransaction not available. Transactional observers will be invoked
> > synchronously.
> > Exception in thread "main"
java.lang.reflect.InaccessibleObjectException
> > at
> >
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native
> > Method)
> > at
> >
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
> > at
> >
java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
> > at
> > java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:488)
> > at
> >
java.base/java.util.concurrent.ForkJoinTask.getThrowableException(ForkJoinTask.java:590)
> > at java.base/java.util.concurrent.ForkJoinTask.get(ForkJoinTask.java:996)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.checkForExceptions(AbstractExecutorServices.java:72)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:58)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:66)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer.createClassBeans(ConcurrentBeanDeployer.java:65)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployment.createBeans(BeanDeployment.java:256)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldStartup.deployBeans(WeldStartup.java:422)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldBootstrap.deployBeans(WeldBootstrap.java:83)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.environment.se.Weld.initialize(Weld.java:789)
> > at my.module/com.foo.NewMain.main(NewMain.java:47)
> > Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make
> > field private com.foo.NewBean com.foo.NewClass.bean accessible: module
> > my.module does not "opens com.foo" to module weld.se.shaded
> > at
> >
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:337)
> > at
> >
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:281)
> > at java.base/java.lang.reflect.Field.checkCanSetAccessible(Field.java:176)
> > at java.base/java.lang.reflect.Field.setAccessible(Field.java:170)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.of(GetAccessibleCopyOfMember.java:38)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.run(GetAccessibleCopyOfMember.java:44)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.run(GetAccessibleCopyOfMember.java:26)
> > at java.base/java.security.AccessController.doPrivileged(Native Method)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.FieldInjectionPoint.<init>(FieldInjectionPoint.java:65)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.createFieldInjectionPoint(InjectionPointFactory.java:141)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.addFieldInjectionPoint(InjectionPointFactory.java:226)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.getFieldInjectionPoints(InjectionPointFactory.java:211)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.DefaultInjector.<init>(DefaultInjector.java:56)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.ResourceInjector.<init>(ResourceInjector.java:57)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.ResourceInjector.of(ResourceInjector.java:48)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.BeanInjectionTarget.<init>(BeanInjectionTarget.java:63)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.BeanInjectionTarget.createDefault(BeanInjectionTarget.java:47)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.manager.InjectionTargetFactoryImpl.chooseInjectionTarget(InjectionTargetFactoryImpl.java:139)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.manager.InjectionTargetFactoryImpl.createInjectionTarget(InjectionTargetFactoryImpl.java:88)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.ManagedBean.<init>(ManagedBean.java:100)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.ManagedBean.of(ManagedBean.java:80)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.AbstractBeanDeployer.createManagedBean(AbstractBeanDeployer.java:280)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployer.createClassBean(BeanDeployer.java:221)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$2.doWork(ConcurrentBeanDeployer.java:68)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$2.doWork(ConcurrentBeanDeployer.java:65)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:62)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:55)
> > at
> >
java.base/java.util.concurrent.ForkJoinTask$AdaptedCallable.exec(ForkJoinTask.java:1431)
> > at
> > java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:283)
> > at
> > java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1603)
> > at
> >
java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:175)
> >
> >
> >
> >
> >
> >
> >
> > Понедельник, 18 сентября 2017, 14:18 +03:00 от Matej Novotny
> > < manovotn(a)redhat.com >:
> >
> > Hi,
> >
> > if you are in SE, you should only need 'weld-se-shaded' artifact (as a
> > JAR).
> > As it is "shaded", it brings along all the other parts of Weld you
might
> > need.
> >
> > Matej
> >
> >
> > ----- Original Message -----
> > > From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > > To: "weld-dev" < weld-dev(a)lists.jboss.org >
> > > Sent: Monday, September 18, 2017 12:17:28 PM
> > > Subject: Re: [weld-dev] Weld and Java 9 JPMS
> > >
> > > Hi Matej
> > >
> > > I am just trying to make Weld work in Java 9 (JavaSE + JPMS).
> > >
> > > I use the following jars as automatic modules:
> > >
> > > weld-environment-common-3.0.2-SNAPSHOT.jar
> > > weld-se-core-3.0.2-SNAPSHOT.jar
> > > weld-se-shaded-3.0.2-SNAPSHOT.jar
> > > weld-spi-3.0.SP1.jar
> > > weld-core-impl-3.0.2-SNAPSHOT.jar
> > >
> > > Is this right configuration? Or should I add/remove something.
> > >
> > > Best regards, Alex
> > >
> > >
> > >
> > > Понедельник, 18 сентября 2017, 12:41 +03:00 от Matej Novotny
> > > < manovotn(a)redhat.com >:
> > >
> > > Uhm, is there anything blocking you from placing it where you would in
> > > Java
> > > 8?
> > > E.g. src/main/resources/META-INF?
> > >
> > > I don't think I have tried this combination (or I do not recall).
> > > From the top of my head I don't know any JDK 9 limitation which would
> > > forbid
> > > to use XML descriptors in this way.
> > > I might be a bit rusty though; been a while since I played with Java 9.
> > >
> > > Please do report back with how this works for you :)
> > > Matej
> > >
> > > ----- Original Message -----
> > > > From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > > > To: "Matej Novotny" < manovotn(a)redhat.com >
> > > > Sent: Monday, September 18, 2017 10:28:11 AM
> > > > Subject: Re[2]: [weld-dev] Weld and Java 9 JPMS
> > > >
> > > > Thank you for your answer. I will try. But where should I place
> > > > beans.xml
> > > > to make Weld read it if I use Java SE+ JPMS?
> > > >
> > > > Best regards, Alex
> > > >
> > > >
> > > > >Понедельник, 18 сентября 2017, 8:10 +03:00 от Matej Novotny
> > > > >< manovotn(a)redhat.com >:
> > > > >
> > > > >Hi Alex
> > > > >
> > > > >Back there we did some tests with earlier versions of Java 9 and
> > > > >eliminated
> > > > >some crucial problems.
> > > > >I think it should be possible to take *existing* app and run it
on
> > > > >Java
> > > > >9.
> > > > >
> > > > >However, creating a whole new modular project might present some
> > > > >additional
> > > > >challenges.
> > > > >Weld itself is not modularized (since it needs to run on Java 8),
> > > > >therefore
> > > > >you would need to list some extra "requires" in
module-info.java for
> > > > >Weld.
> > > > >You also need to have reflection access allowed (we need to
> > > > >instantiate
> > > > >proxies etc) but last time I checked, it was by default enabled in
JDK
> > > > >9
> > > > >wi
> > > > >th just warning showing up.
> > > > >Other than that, it might just work.
> > > > >
> > > > >To answer your other question - no, there is no tutorial, for
there is
> > > > >no
> > > > >special difference between Weld and many other projects in regard
to
> > > > >JDK
> > > > >9.
> > > > >
> > > > >Matej
> > > > >
> > > > >----- Original Message -----
> > > > >> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru
>
> > > > >> To: "weld-dev" < weld-dev(a)lists.jboss.org >
> > > > >> Sent: Sunday, September 17, 2017 3:25:49 PM
> > > > >> Subject: [weld-dev] Weld and Java 9 JPMS
> > > > >>
> > > > >> Hi all
> > > > >>
> > > > >> Could anyone provide information how weld works (if works)
with Java
> > > > >> 9
> > > > >> JPMS?
> > > > >> Is there any tutorial?
> > > > >>
> > > > >> Best regards, Alex
> > > > >>
> > > > >> _______________________________________________
> > > > >> weld-dev mailing list
> > > > >> weld-dev(a)lists.jboss.org
> > > > >> https://lists.jboss.org/mailman/listinfo/weld-dev
> > > >
> > > >
> > > > --
> > > > Alex Sviridov
> > > >
> > >
> > >
> > > --
> > > Alex Sviridov
> > >
> > > _______________________________________________
> > > weld-dev mailing list
> > > weld-dev(a)lists.jboss.org
> > > https://lists.jboss.org/mailman/listinfo/weld-dev
> >
> >
> > --
> > Alex Sviridov
> >
> > _______________________________________________
> > weld-dev mailing list
> > weld-dev(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/weld-dev
>
>
> --
> Alex Sviridov
>
> _______________________________________________
> weld-dev mailing list
> weld-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/weld-dev
3:45 a.m.
New subject: Weld and Java 9 JPMS
Hi Matej
Thank you for your answer, but I couldn't make it work. I opened my package,
but Weld (see my previous message at the end), as I understand, wants to get
access to hidden fields and methods of classes in java.base module and JPMS doesn't
allow it.
So, I gave up - as I don't know what to do else. If you can make it work, please,
report.
It would be very interesting.
Best regards, Alex
Вторник, 19 сентября 2017, 10:22 +03:00 от Matej Novotny
<manovotn(a)redhat.com>:
> 1) Please, take a look at the second table (module overview) here
>
https://labs.consol.de/development/2017/02/13/getting-started-with-java9-...
Did that, the article looks like there is finally some solid material on modules.
> 2) Weld is not unnamed module but automatic module as it is on module path
> and I use it by name.
Yea, you are right, my bad. I meant automatic module OFC.
> 3) From that table (module overview) we see that both automatic and unnamed
> modules can read application modules. If so, then why it doesn't?
I suppose you already got your answer on StackOverflow[1], right?
To add on top of that, if you `exports` package - you only expose public things in there.
For Weld to create proxies of your beans, we need to go deeper and allow reflections
access which may mean accessing private/protected stuff (such as your @Inject private
NewBean bean).
Java 9 doesn't like that and requires you to `opens` the package for this kind of
work.
> And got the following (see below). It seems that Weld can't now work with
> JPMS.
> What will Weld developers say?
From the SO question I guess you got it working in the end.
If you have any other questions, feel free to contact us again.
I'll try to test some JDK 9 project myself to refresh my memory so that I can be of
more help next time :)
Matej
_________________________________________________________________________-
[1] https://stackoverflow.com/questions/46282509
----- Original Message -----
> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> To: "weld-dev" < weld-dev(a)lists.jboss.org >
> Sent: Monday, September 18, 2017 5:23:30 PM
> Subject: Re: [weld-dev] Weld and Java 9 JPMS
>
> So, here I am.
> I changed my.module from
> my.module {
> requires weld.se.shaded;
> exports com.foo;
> }
> to
> my.module {
> requires weld.se.shaded;
> opens com.foo;
> }
>
> And got the following (see below). It seems that Weld can't now work with
> JPMS.
> What will Weld developers say?
>
> Exception in thread "main" org.jboss.weld.exceptions.WeldException:
> WELD-001524: Unable to load proxy class for bean Implicit Bean
> [javax.enterprise.event.Event] with qualifiers [@Default] with class
> interface javax.enterprise.event.Event using classloader
> jdk.internal.loader.ClassLoaders$AppClassLoader@6b2fad11
> at
> java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native
> Method)
> at
>
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
> at
>
java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
> at java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:488)
> at
>
java.base/java.util.concurrent.ForkJoinTask.getThrowableException(ForkJoinTask.java:587)
> at java.base/java.util.concurrent.ForkJoinTask.get(ForkJoinTask.java:996)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.checkForExceptions(AbstractExecutorServices.java:72)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:58)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:66)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer.doAfterBeanDiscovery(ConcurrentBeanDeployer.java:88)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployment.afterBeanDiscovery(BeanDeployment.java:268)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldStartup.deployBeans(WeldStartup.java:466)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldBootstrap.deployBeans(WeldBootstrap.java:83)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.environment.se.Weld.initialize(Weld.java:789)
> at my.module/com.foo.NewMain.main(NewMain.java:47)
> Caused by: org.jboss.weld.exceptions.WeldException: WELD-001524: Unable to
> load proxy class for bean Implicit Bean [javax.enterprise.event.Event] with
> qualifiers [@Default] with class interface javax.enterprise.event.Event
> using classloader jdk.internal.loader.ClassLoaders$AppClassLoader@6b2fad11
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.getProxyClass(ProxyFactory.java:389)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.builtin.AbstractFacadeBean.initializeAfterBeanDiscovery(AbstractFacadeBean.java:61)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$AfterBeanDiscoveryInitializerFactory.doWork(ConcurrentBeanDeployer.java:111)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$AfterBeanDiscoveryInitializerFactory.doWork(ConcurrentBeanDeployer.java:102)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:62)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:55)
> at
>
java.base/java.util.concurrent.ForkJoinTask$AdaptedCallable.exec(ForkJoinTask.java:1431)
> at java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:283)
> at
> java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1603)
> at
>
java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:175)
> Caused by: java.lang.ExceptionInInitializerError
> at
> java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native
> Method)
> at
>
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
> at
>
java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
> at java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:488)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.newClassFile(ProxyFactory.java:496)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.createProxyClass(ProxyFactory.java:455)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.getProxyClass(ProxyFactory.java:381)
> ... 9 more
> Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make
> protected final java.lang.Class
> java.lang.ClassLoader.defineClass(java.lang.String,byte[],int,int) throws
> java.lang.ClassFormatError accessible: module java.base does not "opens
> java.lang" to module weld.se.shaded
> at
>
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:337)
> at
>
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:281)
> at java.base/java.lang.reflect.Method.checkCanSetAccessible(Method.java:198)
> at java.base/java.lang.reflect.Method.setAccessible(Method.java:192)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.classfilewriter.ClassFile$1.run(ClassFile.java:256)
> at java.base/java.security.AccessController.doPrivileged(Native Method)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.classfilewriter.ClassFile.<clinit>(ClassFile.java:251)
> ... 16 more
>
>
>
>
>
>
> Понедельник, 18 сентября 2017, 16:39 +03:00 от Matej Novotny
> < manovotn(a)redhat.com >:
>
> From the exception you are getting, this line is important:
>
> "Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make
> field private com.foo.NewBean com.foo.NewClass.bean accessible: module
> my.module does not "opens com.foo" to module weld.se.shaded"
>
> Basically, Weld is not modularized (== lands in unnamed module) and it needs
> access to your module so that it can create beans. E.g. you need to make
> sure unnamed module has access to your module.
> I think that by default in JDK 9 the access is intended so that all modules
> can read unnamed module, but unnamed module can only read itself (simplified
> version).
> Hence you want to break a few rules and force this to work in the opposite
> direction for your module.
>
> Matej
>
>
> ----- Original Message -----
> > From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > To: "weld-dev" < weld-dev(a)lists.jboss.org >
> > Sent: Monday, September 18, 2017 1:46:36 PM
> > Subject: Re: [weld-dev] Weld and Java 9 JPMS
> >
> > Thank you for your answer.
> >
> > Could anyone give any suggestion about the following?
> >
> > I have my named module and weld-se-shaded as unnamed module.
> > In my module I have
> >
> > module my.module {
> > requires weld.se.shaded;
> > exports com.foo;
> > }
> >
> > #################################
> > package com.foo;
> >
> > import javax.enterprise.context.ApplicationScoped;
> > import javax.inject.Inject;
> >
> > @ApplicationScoped
> > public class NewClass {
> >
> > @Inject
> > private NewBean bean;
> >
> > public void doIt() {
> > bean.doIt();
> > }
> >
> > }
> >
> > #################################
> > package com.foo;
> >
> > import javax.enterprise.context.Dependent;
> >
> > @Dependent
> > public class NewBean {
> >
> > public void doIt() {
> > System.out.println("I am doing it);
> > }
> > }
> >
> > And this is the result
> >
> > Sep 18, 2017 2:33:12 PM org.jboss.weld.bootstrap.WeldStartup <clinit>
> > INFO: WELD-000900: 3.0.2 (2017-09-18 08:49)
> > Sep 18, 2017 2:33:12 PM
> > org.jboss.weld.environment.deployment.discovery.ReflectionDiscoveryStrategy
> > processAnnotatedDiscovery
> > INFO: WELD-ENV-000014: Falling back to Java Reflection for
> > bean-discovery-mode="annotated" discovery. Add org.jboss:jandex to
the
> > classpath to speed-up startup.
> > Sep 18, 2017 2:33:12 PM org.jboss.weld.bootstrap.WeldStartup startContainer
> > INFO: WELD-000101: Transactional services not available. Injection of
> > @Inject
> > UserTransaction not available. Transactional observers will be invoked
> > synchronously.
> > Exception in thread "main"
java.lang.reflect.InaccessibleObjectException
> > at
> >
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native
> > Method)
> > at
> >
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
> > at
> >
java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
> > at
> > java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:488)
> > at
> >
java.base/java.util.concurrent.ForkJoinTask.getThrowableException(ForkJoinTask.java:590)
> > at java.base/java.util.concurrent.ForkJoinTask.get(ForkJoinTask.java:996)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.checkForExceptions(AbstractExecutorServices.java:72)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:58)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:66)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer.createClassBeans(ConcurrentBeanDeployer.java:65)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployment.createBeans(BeanDeployment.java:256)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldStartup.deployBeans(WeldStartup.java:422)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldBootstrap.deployBeans(WeldBootstrap.java:83)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.environment.se.Weld.initialize(Weld.java:789)
> > at my.module/com.foo.NewMain.main(NewMain.java:47)
> > Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make
> > field private com.foo.NewBean com.foo.NewClass.bean accessible: module
> > my.module does not "opens com.foo" to module weld.se.shaded
> > at
> >
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:337)
> > at
> >
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:281)
> > at java.base/java.lang.reflect.Field.checkCanSetAccessible(Field.java:176)
> > at java.base/java.lang.reflect.Field.setAccessible(Field.java:170)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.of(GetAccessibleCopyOfMember.java:38)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.run(GetAccessibleCopyOfMember.java:44)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.run(GetAccessibleCopyOfMember.java:26)
> > at java.base/java.security.AccessController.doPrivileged(Native Method)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.FieldInjectionPoint.<init>(FieldInjectionPoint.java:65)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.createFieldInjectionPoint(InjectionPointFactory.java:141)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.addFieldInjectionPoint(InjectionPointFactory.java:226)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.getFieldInjectionPoints(InjectionPointFactory.java:211)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.DefaultInjector.<init>(DefaultInjector.java:56)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.ResourceInjector.<init>(ResourceInjector.java:57)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.ResourceInjector.of(ResourceInjector.java:48)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.BeanInjectionTarget.<init>(BeanInjectionTarget.java:63)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.BeanInjectionTarget.createDefault(BeanInjectionTarget.java:47)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.manager.InjectionTargetFactoryImpl.chooseInjectionTarget(InjectionTargetFactoryImpl.java:139)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.manager.InjectionTargetFactoryImpl.createInjectionTarget(InjectionTargetFactoryImpl.java:88)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.ManagedBean.<init>(ManagedBean.java:100)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.ManagedBean.of(ManagedBean.java:80)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.AbstractBeanDeployer.createManagedBean(AbstractBeanDeployer.java:280)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployer.createClassBean(BeanDeployer.java:221)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$2.doWork(ConcurrentBeanDeployer.java:68)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$2.doWork(ConcurrentBeanDeployer.java:65)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:62)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:55)
> > at
> >
java.base/java.util.concurrent.ForkJoinTask$AdaptedCallable.exec(ForkJoinTask.java:1431)
> > at
> > java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:283)
> > at
> > java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1603)
> > at
> >
java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:175)
> >
> >
> >
> >
> >
> >
> >
> > Понедельник, 18 сентября 2017, 14:18 +03:00 от Matej Novotny
> > < manovotn(a)redhat.com >:
> >
> > Hi,
> >
> > if you are in SE, you should only need 'weld-se-shaded' artifact (as a
> > JAR).
> > As it is "shaded", it brings along all the other parts of Weld you
might
> > need.
> >
> > Matej
> >
> >
> > ----- Original Message -----
> > > From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > > To: "weld-dev" < weld-dev(a)lists.jboss.org >
> > > Sent: Monday, September 18, 2017 12:17:28 PM
> > > Subject: Re: [weld-dev] Weld and Java 9 JPMS
> > >
> > > Hi Matej
> > >
> > > I am just trying to make Weld work in Java 9 (JavaSE + JPMS).
> > >
> > > I use the following jars as automatic modules:
> > >
> > > weld-environment-common-3.0.2-SNAPSHOT.jar
> > > weld-se-core-3.0.2-SNAPSHOT.jar
> > > weld-se-shaded-3.0.2-SNAPSHOT.jar
> > > weld-spi-3.0.SP1.jar
> > > weld-core-impl-3.0.2-SNAPSHOT.jar
> > >
> > > Is this right configuration? Or should I add/remove something.
> > >
> > > Best regards, Alex
> > >
> > >
> > >
> > > Понедельник, 18 сентября 2017, 12:41 +03:00 от Matej Novotny
> > > < manovotn(a)redhat.com >:
> > >
> > > Uhm, is there anything blocking you from placing it where you would in
> > > Java
> > > 8?
> > > E.g. src/main/resources/META-INF?
> > >
> > > I don't think I have tried this combination (or I do not recall).
> > > From the top of my head I don't know any JDK 9 limitation which would
> > > forbid
> > > to use XML descriptors in this way.
> > > I might be a bit rusty though; been a while since I played with Java 9.
> > >
> > > Please do report back with how this works for you :)
> > > Matej
> > >
> > > ----- Original Message -----
> > > > From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > > > To: "Matej Novotny" < manovotn(a)redhat.com >
> > > > Sent: Monday, September 18, 2017 10:28:11 AM
> > > > Subject: Re[2]: [weld-dev] Weld and Java 9 JPMS
> > > >
> > > > Thank you for your answer. I will try. But where should I place
> > > > beans.xml
> > > > to make Weld read it if I use Java SE+ JPMS?
> > > >
> > > > Best regards, Alex
> > > >
> > > >
> > > > >Понедельник, 18 сентября 2017, 8:10 +03:00 от Matej Novotny
> > > > >< manovotn(a)redhat.com >:
> > > > >
> > > > >Hi Alex
> > > > >
> > > > >Back there we did some tests with earlier versions of Java 9 and
> > > > >eliminated
> > > > >some crucial problems.
> > > > >I think it should be possible to take *existing* app and run it
on
> > > > >Java
> > > > >9.
> > > > >
> > > > >However, creating a whole new modular project might present some
> > > > >additional
> > > > >challenges.
> > > > >Weld itself is not modularized (since it needs to run on Java 8),
> > > > >therefore
> > > > >you would need to list some extra "requires" in
module-info.java for
> > > > >Weld.
> > > > >You also need to have reflection access allowed (we need to
> > > > >instantiate
> > > > >proxies etc) but last time I checked, it was by default enabled in
JDK
> > > > >9
> > > > >wi
> > > > >th just warning showing up.
> > > > >Other than that, it might just work.
> > > > >
> > > > >To answer your other question - no, there is no tutorial, for
there is
> > > > >no
> > > > >special difference between Weld and many other projects in regard
to
> > > > >JDK
> > > > >9.
> > > > >
> > > > >Matej
> > > > >
> > > > >----- Original Message -----
> > > > >> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru
>
> > > > >> To: "weld-dev" < weld-dev(a)lists.jboss.org >
> > > > >> Sent: Sunday, September 17, 2017 3:25:49 PM
> > > > >> Subject: [weld-dev] Weld and Java 9 JPMS
> > > > >>
> > > > >> Hi all
> > > > >>
> > > > >> Could anyone provide information how weld works (if works)
with Java
> > > > >> 9
> > > > >> JPMS?
> > > > >> Is there any tutorial?
> > > > >>
> > > > >> Best regards, Alex
> > > > >>
> > > > >> _______________________________________________
> > > > >> weld-dev mailing list
> > > > >> weld-dev(a)lists.jboss.org
> > > > >> https://lists.jboss.org/mailman/listinfo/weld-dev
> > > >
> > > >
> > > > --
> > > > Alex Sviridov
> > > >
> > >
> > >
> > > --
> > > Alex Sviridov
> > >
> > > _______________________________________________
> > > weld-dev mailing list
> > > weld-dev(a)lists.jboss.org
> > > https://lists.jboss.org/mailman/listinfo/weld-dev
> >
> >
> > --
> > Alex Sviridov
> >
> > _______________________________________________
> > weld-dev mailing list
> > weld-dev(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/weld-dev
>
>
> --
> Alex Sviridov
>
> _______________________________________________
> weld-dev mailing list
> weld-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/weld-dev
--
Alex Sviridov
6:13 a.m.
New subject: Weld and Java 9 JPMS
Hi,
would you mind sharing your project/reproducer somewhere?
That would be the fastest way to get on the same track.
Also, what JDK release are you using? Sticking to latest I presume?
I am not sure I understand your structure but I tried something in this GH
"project" -> https://github.com/manovotn/JDK9Playground
I just used Weld SE (3.0.1) and added two beans and tried if it works - looks like it
does.
Myself, I am using JDK 9 build 181.
Matej
----- Original Message -----
From: "Alex Sviridov" <ooo_saturn7(a)mail.ru>
To: "weld-dev" <weld-dev(a)lists.jboss.org>
Sent: Tuesday, September 19, 2017 10:45:03 AM
Subject: Re: [weld-dev] Weld and Java 9 JPMS
Hi Matej
Thank you for your answer, but I couldn't make it work. I opened my package,
but Weld (see my previous message at the end), as I understand, wants to get
access to hidden fields and methods of classes in java.base module and JPMS
doesn't
allow it.
So, I gave up - as I don't know what to do else. If you can make it work,
please, report.
It would be very interesting.
Best regards, Alex
Вторник, 19 сентября 2017, 10:22 +03:00 от Matej Novotny
<manovotn(a)redhat.com>:
> 1) Please, take a look at the second table (module overview) here
>
https://labs.consol.de/development/2017/02/13/getting-started-with-java9-...
Did that, the article looks like there is finally some solid material on
modules.
> 2) Weld is not unnamed module but automatic module as it is on module path
> and I use it by name.
Yea, you are right, my bad. I meant automatic module OFC.
> 3) From that table (module overview) we see that both automatic and unnamed
> modules can read application modules. If so, then why it doesn't?
I suppose you already got your answer on StackOverflow[1], right?
To add on top of that, if you `exports` package - you only expose public
things in there.
For Weld to create proxies of your beans, we need to go deeper and allow
reflections access which may mean accessing private/protected stuff (such as
your @Inject private NewBean bean).
Java 9 doesn't like that and requires you to `opens` the package for this
kind of work.
> And got the following (see below). It seems that Weld can't now work with
> JPMS.
> What will Weld developers say?
From the SO question I guess you got it working in the end.
If you have any other questions, feel free to contact us again.
I'll try to test some JDK 9 project myself to refresh my memory so that I can
be of more help next time :)
Matej
_________________________________________________________________________-
[1] https://stackoverflow.com/questions/46282509
----- Original Message -----
> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> To: "weld-dev" < weld-dev(a)lists.jboss.org >
> Sent: Monday, September 18, 2017 5:23:30 PM
> Subject: Re: [weld-dev] Weld and Java 9 JPMS
>
> So, here I am.
> I changed my.module from
> my.module {
> requires weld.se.shaded;
> exports com.foo;
> }
> to
> my.module {
> requires weld.se.shaded;
> opens com.foo;
> }
>
> And got the following (see below). It seems that Weld can't now work with
> JPMS.
> What will Weld developers say?
>
> Exception in thread "main" org.jboss.weld.exceptions.WeldException:
> WELD-001524: Unable to load proxy class for bean Implicit Bean
> [javax.enterprise.event.Event] with qualifiers [@Default] with class
> interface javax.enterprise.event.Event using classloader
> jdk.internal.loader.ClassLoaders$AppClassLoader@6b2fad11
> at
> java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native
> Method)
> at
>
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
> at
>
java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
> at
> java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:488)
> at
>
java.base/java.util.concurrent.ForkJoinTask.getThrowableException(ForkJoinTask.java:587)
> at java.base/java.util.concurrent.ForkJoinTask.get(ForkJoinTask.java:996)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.checkForExceptions(AbstractExecutorServices.java:72)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:58)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:66)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer.doAfterBeanDiscovery(ConcurrentBeanDeployer.java:88)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployment.afterBeanDiscovery(BeanDeployment.java:268)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldStartup.deployBeans(WeldStartup.java:466)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldBootstrap.deployBeans(WeldBootstrap.java:83)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.environment.se.Weld.initialize(Weld.java:789)
> at my.module/com.foo.NewMain.main(NewMain.java:47)
> Caused by: org.jboss.weld.exceptions.WeldException: WELD-001524: Unable to
> load proxy class for bean Implicit Bean [javax.enterprise.event.Event] with
> qualifiers [@Default] with class interface javax.enterprise.event.Event
> using classloader jdk.internal.loader.ClassLoaders$AppClassLoader@6b2fad11
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.getProxyClass(ProxyFactory.java:389)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.builtin.AbstractFacadeBean.initializeAfterBeanDiscovery(AbstractFacadeBean.java:61)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$AfterBeanDiscoveryInitializerFactory.doWork(ConcurrentBeanDeployer.java:111)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$AfterBeanDiscoveryInitializerFactory.doWork(ConcurrentBeanDeployer.java:102)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:62)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:55)
> at
>
java.base/java.util.concurrent.ForkJoinTask$AdaptedCallable.exec(ForkJoinTask.java:1431)
> at
> java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:283)
> at
> java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1603)
> at
>
java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:175)
> Caused by: java.lang.ExceptionInInitializerError
> at
> java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native
> Method)
> at
>
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
> at
>
java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
> at
> java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:488)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.newClassFile(ProxyFactory.java:496)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.createProxyClass(ProxyFactory.java:455)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.proxy.ProxyFactory.getProxyClass(ProxyFactory.java:381)
> ... 9 more
> Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make
> protected final java.lang.Class
> java.lang.ClassLoader.defineClass(java.lang.String,byte[],int,int) throws
> java.lang.ClassFormatError accessible: module java.base does not "opens
> java.lang" to module weld.se.shaded
> at
>
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:337)
> at
>
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:281)
> at
> java.base/java.lang.reflect.Method.checkCanSetAccessible(Method.java:198)
> at java.base/java.lang.reflect.Method.setAccessible(Method.java:192)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.classfilewriter.ClassFile$1.run(ClassFile.java:256)
> at java.base/java.security.AccessController.doPrivileged(Native Method)
> at
>
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.classfilewriter.ClassFile.<clinit>(ClassFile.java:251)
> ... 16 more
>
>
>
>
>
>
> Понедельник, 18 сентября 2017, 16:39 +03:00 от Matej Novotny
> < manovotn(a)redhat.com >:
>
> From the exception you are getting, this line is important:
>
> "Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make
> field private com.foo.NewBean com.foo.NewClass.bean accessible: module
> my.module does not "opens com.foo" to module weld.se.shaded"
>
> Basically, Weld is not modularized (== lands in unnamed module) and it
> needs
> access to your module so that it can create beans. E.g. you need to make
> sure unnamed module has access to your module.
> I think that by default in JDK 9 the access is intended so that all modules
> can read unnamed module, but unnamed module can only read itself
> (simplified
> version).
> Hence you want to break a few rules and force this to work in the opposite
> direction for your module.
>
> Matej
>
>
> ----- Original Message -----
> > From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > To: "weld-dev" < weld-dev(a)lists.jboss.org >
> > Sent: Monday, September 18, 2017 1:46:36 PM
> > Subject: Re: [weld-dev] Weld and Java 9 JPMS
> >
> > Thank you for your answer.
> >
> > Could anyone give any suggestion about the following?
> >
> > I have my named module and weld-se-shaded as unnamed module.
> > In my module I have
> >
> > module my.module {
> > requires weld.se.shaded;
> > exports com.foo;
> > }
> >
> > #################################
> > package com.foo;
> >
> > import javax.enterprise.context.ApplicationScoped;
> > import javax.inject.Inject;
> >
> > @ApplicationScoped
> > public class NewClass {
> >
> > @Inject
> > private NewBean bean;
> >
> > public void doIt() {
> > bean.doIt();
> > }
> >
> > }
> >
> > #################################
> > package com.foo;
> >
> > import javax.enterprise.context.Dependent;
> >
> > @Dependent
> > public class NewBean {
> >
> > public void doIt() {
> > System.out.println("I am doing it);
> > }
> > }
> >
> > And this is the result
> >
> > Sep 18, 2017 2:33:12 PM org.jboss.weld.bootstrap.WeldStartup <clinit>
> > INFO: WELD-000900: 3.0.2 (2017-09-18 08:49)
> > Sep 18, 2017 2:33:12 PM
> > org.jboss.weld.environment.deployment.discovery.ReflectionDiscoveryStrategy
> > processAnnotatedDiscovery
> > INFO: WELD-ENV-000014: Falling back to Java Reflection for
> > bean-discovery-mode="annotated" discovery. Add org.jboss:jandex to
the
> > classpath to speed-up startup.
> > Sep 18, 2017 2:33:12 PM org.jboss.weld.bootstrap.WeldStartup
> > startContainer
> > INFO: WELD-000101: Transactional services not available. Injection of
> > @Inject
> > UserTransaction not available. Transactional observers will be invoked
> > synchronously.
> > Exception in thread "main"
java.lang.reflect.InaccessibleObjectException
> > at
> >
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance0(Native
> > Method)
> > at
> >
java.base/jdk.internal.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
> > at
> >
java.base/jdk.internal.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
> > at
> > java.base/java.lang.reflect.Constructor.newInstance(Constructor.java:488)
> > at
> >
java.base/java.util.concurrent.ForkJoinTask.getThrowableException(ForkJoinTask.java:590)
> > at java.base/java.util.concurrent.ForkJoinTask.get(ForkJoinTask.java:996)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.checkForExceptions(AbstractExecutorServices.java:72)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:58)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.AbstractExecutorServices.invokeAllAndCheckForExceptions(AbstractExecutorServices.java:66)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer.createClassBeans(ConcurrentBeanDeployer.java:65)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployment.createBeans(BeanDeployment.java:256)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldStartup.deployBeans(WeldStartup.java:422)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.WeldBootstrap.deployBeans(WeldBootstrap.java:83)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.environment.se.Weld.initialize(Weld.java:789)
> > at my.module/com.foo.NewMain.main(NewMain.java:47)
> > Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make
> > field private com.foo.NewBean com.foo.NewClass.bean accessible: module
> > my.module does not "opens com.foo" to module weld.se.shaded
> > at
> >
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:337)
> > at
> >
java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:281)
> > at
> > java.base/java.lang.reflect.Field.checkCanSetAccessible(Field.java:176)
> > at java.base/java.lang.reflect.Field.setAccessible(Field.java:170)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.of(GetAccessibleCopyOfMember.java:38)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.run(GetAccessibleCopyOfMember.java:44)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.security.GetAccessibleCopyOfMember.run(GetAccessibleCopyOfMember.java:26)
> > at java.base/java.security.AccessController.doPrivileged(Native Method)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.FieldInjectionPoint.<init>(FieldInjectionPoint.java:65)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.createFieldInjectionPoint(InjectionPointFactory.java:141)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.addFieldInjectionPoint(InjectionPointFactory.java:226)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.InjectionPointFactory.getFieldInjectionPoints(InjectionPointFactory.java:211)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.DefaultInjector.<init>(DefaultInjector.java:56)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.ResourceInjector.<init>(ResourceInjector.java:57)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.ResourceInjector.of(ResourceInjector.java:48)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.BeanInjectionTarget.<init>(BeanInjectionTarget.java:63)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.injection.producer.BeanInjectionTarget.createDefault(BeanInjectionTarget.java:47)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.manager.InjectionTargetFactoryImpl.chooseInjectionTarget(InjectionTargetFactoryImpl.java:139)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.manager.InjectionTargetFactoryImpl.createInjectionTarget(InjectionTargetFactoryImpl.java:88)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.ManagedBean.<init>(ManagedBean.java:100)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bean.ManagedBean.of(ManagedBean.java:80)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.AbstractBeanDeployer.createManagedBean(AbstractBeanDeployer.java:280)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.BeanDeployer.createClassBean(BeanDeployer.java:221)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$2.doWork(ConcurrentBeanDeployer.java:68)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.bootstrap.ConcurrentBeanDeployer$2.doWork(ConcurrentBeanDeployer.java:65)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:62)
> > at
> >
weld.se.shaded@3.0.2-SNAPSHOT/org.jboss.weld.executor.IterativeWorkerTaskFactory$1.call(IterativeWorkerTaskFactory.java:55)
> > at
> >
java.base/java.util.concurrent.ForkJoinTask$AdaptedCallable.exec(ForkJoinTask.java:1431)
> > at
> > java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:283)
> > at
> > java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1603)
> > at
> >
java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:175)
> >
> >
> >
> >
> >
> >
> >
> > Понедельник, 18 сентября 2017, 14:18 +03:00 от Matej Novotny
> > < manovotn(a)redhat.com >:
> >
> > Hi,
> >
> > if you are in SE, you should only need 'weld-se-shaded' artifact (as a
> > JAR).
> > As it is "shaded", it brings along all the other parts of Weld you
might
> > need.
> >
> > Matej
> >
> >
> > ----- Original Message -----
> > > From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > > To: "weld-dev" < weld-dev(a)lists.jboss.org >
> > > Sent: Monday, September 18, 2017 12:17:28 PM
> > > Subject: Re: [weld-dev] Weld and Java 9 JPMS
> > >
> > > Hi Matej
> > >
> > > I am just trying to make Weld work in Java 9 (JavaSE + JPMS).
> > >
> > > I use the following jars as automatic modules:
> > >
> > > weld-environment-common-3.0.2-SNAPSHOT.jar
> > > weld-se-core-3.0.2-SNAPSHOT.jar
> > > weld-se-shaded-3.0.2-SNAPSHOT.jar
> > > weld-spi-3.0.SP1.jar
> > > weld-core-impl-3.0.2-SNAPSHOT.jar
> > >
> > > Is this right configuration? Or should I add/remove something.
> > >
> > > Best regards, Alex
> > >
> > >
> > >
> > > Понедельник, 18 сентября 2017, 12:41 +03:00 от Matej Novotny
> > > < manovotn(a)redhat.com >:
> > >
> > > Uhm, is there anything blocking you from placing it where you would in
> > > Java
> > > 8?
> > > E.g. src/main/resources/META-INF?
> > >
> > > I don't think I have tried this combination (or I do not recall).
> > > From the top of my head I don't know any JDK 9 limitation which would
> > > forbid
> > > to use XML descriptors in this way.
> > > I might be a bit rusty though; been a while since I played with Java 9.
> > >
> > > Please do report back with how this works for you :)
> > > Matej
> > >
> > > ----- Original Message -----
> > > > From: "Alex Sviridov" < ooo_saturn7(a)mail.ru >
> > > > To: "Matej Novotny" < manovotn(a)redhat.com >
> > > > Sent: Monday, September 18, 2017 10:28:11 AM
> > > > Subject: Re[2]: [weld-dev] Weld and Java 9 JPMS
> > > >
> > > > Thank you for your answer. I will try. But where should I place
> > > > beans.xml
> > > > to make Weld read it if I use Java SE+ JPMS?
> > > >
> > > > Best regards, Alex
> > > >
> > > >
> > > > >Понедельник, 18 сентября 2017, 8:10 +03:00 от Matej Novotny
> > > > >< manovotn(a)redhat.com >:
> > > > >
> > > > >Hi Alex
> > > > >
> > > > >Back there we did some tests with earlier versions of Java 9 and
> > > > >eliminated
> > > > >some crucial problems.
> > > > >I think it should be possible to take *existing* app and run it
on
> > > > >Java
> > > > >9.
> > > > >
> > > > >However, creating a whole new modular project might present some
> > > > >additional
> > > > >challenges.
> > > > >Weld itself is not modularized (since it needs to run on Java
8),
> > > > >therefore
> > > > >you would need to list some extra "requires" in
module-info.java for
> > > > >Weld.
> > > > >You also need to have reflection access allowed (we need to
> > > > >instantiate
> > > > >proxies etc) but last time I checked, it was by default enabled
in
> > > > >JDK
> > > > >9
> > > > >wi
> > > > >th just warning showing up.
> > > > >Other than that, it might just work.
> > > > >
> > > > >To answer your other question - no, there is no tutorial, for
there
> > > > >is
> > > > >no
> > > > >special difference between Weld and many other projects in regard
to
> > > > >JDK
> > > > >9.
> > > > >
> > > > >Matej
> > > > >
> > > > >----- Original Message -----
> > > > >> From: "Alex Sviridov" < ooo_saturn7(a)mail.ru
>
> > > > >> To: "weld-dev" < weld-dev(a)lists.jboss.org >
> > > > >> Sent: Sunday, September 17, 2017 3:25:49 PM
> > > > >> Subject: [weld-dev] Weld and Java 9 JPMS
> > > > >>
> > > > >> Hi all
> > > > >>
> > > > >> Could anyone provide information how weld works (if works)
with
> > > > >> Java
> > > > >> 9
> > > > >> JPMS?
> > > > >> Is there any tutorial?
> > > > >>
> > > > >> Best regards, Alex
> > > > >>
> > > > >> _______________________________________________
> > > > >> weld-dev mailing list
> > > > >> weld-dev(a)lists.jboss.org
> > > > >> https://lists.jboss.org/mailman/listinfo/weld-dev
> > > >
> > > >
> > > > --
> > > > Alex Sviridov
> > > >
> > >
> > >
> > > --
> > > Alex Sviridov
> > >
> > > _______________________________________________
> > > weld-dev mailing list
> > > weld-dev(a)lists.jboss.org
> > > https://lists.jboss.org/mailman/listinfo/weld-dev
> >
> >
> > --
> > Alex Sviridov
> >
> > _______________________________________________
> > weld-dev mailing list
> > weld-dev(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/weld-dev
>
>
> --
> Alex Sviridov
>
> _______________________________________________
> weld-dev mailing list
> weld-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/weld-dev
--
Alex Sviridov
_______________________________________________
weld-dev mailing list
weld-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/weld-dev
2408
days inactive
2409
days old
9 comments
2 participants
participants (2)
-
Alex Sviridov -
Matej Novotny