1:37 a.m.
Hello Welders !
Not sure if this is the right mailing list, but worth a shot ;)
I am trying to enable a CDI interceptor inside JBoss Forge addons but I am
facing a hard time making Weld understand that. The interceptor classes are
in the classpath but I keep getting this error:
WELD-001417: Enabled interceptor class
org.jboss.forge.addon.infinispan.MyInterceptor
(<class>org.jboss.forge.addon.infinispan.MyInterceptor</class> in
jar:file:/home/ggastald/.forge/addons/org-foo-foo-1-0-0-SNAPSHOT/foo-1.0.0-SNAPSHOT-forge-addon.jar!/META-INF/beans.xml@7)
does not match an interceptor bean: the class is not found, or not
annotated with @Interceptor and still not registered through a portable
extension, or not annotated with @Dependent inside an implicit bean archive
I have beans.xml with annotated-mode="all". I even added the @Dependent to
the interceptor class, but no luck. The current thread ClassLoader can
resolve the interceptor class also.
I've opened https://issues.jboss.org/browse/FURNACE-145 with more
information on the subject, in case someone feels brave enough to help me
out on this :).
I appreciate any help!
Best Regards,
George Gastaldi
Principal Software Engineer
Red Hat <https://www.redhat.com>
Remote
Joinville - Santa Catarina
ggastald(a)redhat.com M: +55-47-99711-1000
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
@redhatnews <https://twitter.com/redhatnews> Red Hat
<https://www.linkedin.com/company/red-hat> Red Hat
<https://www.facebook.com/RedHatInc>
9:46 a.m.
New subject: WELD-001417 while enabling interceptors in JBoss Forge addons
Hi George
Forge addons are far from my range of expertise so I am just going to shoot in the dark
here :)
Make sure you have beans.xml (with discovery mode all and enabled interceptor) in both
JARS - the one which contains the interceptor, as well as the one trying to use it.
If that doesn't work, try to tackle the interceptor a bit and use @Priority as a means
of enablement (this enables interceptor globally as opposed to beans.xml which does that
on per-bean-archive basis).
Might not be what you seek but might also give us some additional information on whats
going wrong.
Matej
----- Original Message -----
From: "George Gastaldi" <ggastald(a)redhat.com>
To: "Weld" <weld-dev(a)lists.jboss.org>
Sent: Tuesday, July 18, 2017 1:37:15 AM
Subject: [weld-dev] WELD-001417 while enabling interceptors in JBoss Forge addons
Hello Welders !
Not sure if this is the right mailing list, but worth a shot ;)
I am trying to enable a CDI interceptor inside JBoss Forge addons but I am
facing a hard time making Weld understand that. The interceptor classes are
in the classpath but I keep getting this error:
WELD-001417: Enabled interceptor class
org.jboss.forge.addon.infinispan.MyInterceptor
(<class>org.jboss.forge.addon.infinispan.MyInterceptor</class> in
jar:file:/home/ggastald/.forge/addons/org-foo-foo-1-0-0-SNAPSHOT/foo-1.0.0-SNAPSHOT-forge-addon.jar!/META-INF/beans.xml@7)
does not match an interceptor bean: the class is not found, or not annotated
with @Interceptor and still not registered through a portable extension, or
not annotated with @Dependent inside an implicit bean archive
I have beans.xml with annotated-mode="all". I even added the @Dependent to
the interceptor class, but no luck. The current thread ClassLoader can
resolve the interceptor class also.
I've opened https://issues.jboss.org/browse/FURNACE-145 with more information
on the subject, in case someone feels brave enough to help me out on this
:).
I appreciate any help!
Best Regards,
George Gastaldi
Principal Software Engineer
Red Hat
Remote
Joinville - Santa Catarina
ggastald(a)redhat.com M: +55-47-99711-1000
TRIED. TESTED. TRUSTED.
@redhatnews Red Hat Red Hat
_______________________________________________
weld-dev mailing list
weld-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/weld-dev
3:12 p.m.
Hi George,
Can you send us some code that we can easily run to reproduce your issue ?
Thx
Antoine
On Tue, Jul 18, 2017 at 9:50 AM Matej Novotny <manovotn(a)redhat.com> wrote:
Hi George
Forge addons are far from my range of expertise so I am just going to
shoot in the dark here :)
Make sure you have beans.xml (with discovery mode all and enabled
interceptor) in both JARS - the one which contains the interceptor, as well
as the one trying to use it.
If that doesn't work, try to tackle the interceptor a bit and use
@Priority as a means of enablement (this enables interceptor globally as
opposed to beans.xml which does that on per-bean-archive basis).
Might not be what you seek but might also give us some additional
information on whats going wrong.
Matej
----- Original Message -----
> From: "George Gastaldi" <ggastald(a)redhat.com>
> To: "Weld" <weld-dev(a)lists.jboss.org>
> Sent: Tuesday, July 18, 2017 1:37:15 AM
> Subject: [weld-dev] WELD-001417 while enabling interceptors in JBoss
Forge addons
>
> Hello Welders !
>
> Not sure if this is the right mailing list, but worth a shot ;)
>
> I am trying to enable a CDI interceptor inside JBoss Forge addons but I
am
> facing a hard time making Weld understand that. The interceptor classes
are
> in the classpath but I keep getting this error:
>
> WELD-001417: Enabled interceptor class
> org.jboss.forge.addon.infinispan.MyInterceptor
> (<class>org.jboss.forge.addon.infinispan.MyInterceptor</class> in
>
jar:file:/home/ggastald/.forge/addons/org-foo-foo-1-0-0-SNAPSHOT/foo-1.0.0-SNAPSHOT-forge-addon.jar!/META-INF/beans.xml@7
)
> does not match an interceptor bean: the class is not found, or not
annotated
> with @Interceptor and still not registered through a portable extension,
or
> not annotated with @Dependent inside an implicit bean archive
>
> I have beans.xml with annotated-mode="all". I even added the @Dependent
to
> the interceptor class, but no luck. The current thread ClassLoader can
> resolve the interceptor class also.
>
> I've opened https://issues.jboss.org/browse/FURNACE-145 with more
information
> on the subject, in case someone feels brave enough to help me out on this
> :).
>
> I appreciate any help!
>
> Best Regards,
>
>
>
>
>
>
>
>
> George Gastaldi
>
> Principal Software Engineer
>
> Red Hat
>
> Remote
>
> Joinville - Santa Catarina
>
> ggastald(a)redhat.com M: +55-47-99711-1000 <+55%2047%2099711-1000>
> TRIED. TESTED. TRUSTED.
> @redhatnews Red Hat Red Hat
>
>
> _______________________________________________
> weld-dev mailing list
> weld-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/weld-dev
_______________________________________________
weld-dev mailing list
weld-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/weld-dev
5:48 p.m.
Yes, please find attached a ZIP containing two addons.
To reproduce it, follow the steps:
1) Unzip the attached file (say in /tmp)
2) Start Forge
3) Run addon-build-and-install --project-root /tmp/infinispan
4) Run addon-build-and-install --project-root /tmp/foo
5) Stop Forge and start it again
6) In another bash window, run tail -f ~/.forge/log/forge.log and you
should see the Weld output.
7) If no errors are found, running the command "x" should print something
@Matej, same error using @Priority :(
I am still investigating
Best Regards,
George Gastaldi
Principal Software Engineer
Red Hat <https://www.redhat.com>
Remote
Joinville - Santa Catarina
ggastald(a)redhat.com M: +55-47-99711-1000
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
@redhatnews <https://twitter.com/redhatnews> Red Hat
<https://www.linkedin.com/company/red-hat> Red Hat
<https://www.facebook.com/RedHatInc>
On Tue, Jul 18, 2017 at 10:12 AM, Antoine Sabot-Durand <asd(a)redhat.com>
wrote:
Hi George,
Can you send us some code that we can easily run to reproduce your issue ?
Thx
Antoine
On Tue, Jul 18, 2017 at 9:50 AM Matej Novotny <manovotn(a)redhat.com> wrote:
> Hi George
>
> Forge addons are far from my range of expertise so I am just going to
> shoot in the dark here :)
>
> Make sure you have beans.xml (with discovery mode all and enabled
> interceptor) in both JARS - the one which contains the interceptor, as well
> as the one trying to use it.
>
> If that doesn't work, try to tackle the interceptor a bit and use
> @Priority as a means of enablement (this enables interceptor globally as
> opposed to beans.xml which does that on per-bean-archive basis).
> Might not be what you seek but might also give us some additional
> information on whats going wrong.
>
> Matej
>
> ----- Original Message -----
> > From: "George Gastaldi" <ggastald(a)redhat.com>
> > To: "Weld" <weld-dev(a)lists.jboss.org>
> > Sent: Tuesday, July 18, 2017 1:37:15 AM
> > Subject: [weld-dev] WELD-001417 while enabling interceptors in JBoss
> Forge addons
> >
> > Hello Welders !
> >
> > Not sure if this is the right mailing list, but worth a shot ;)
> >
> > I am trying to enable a CDI interceptor inside JBoss Forge addons but I
> am
> > facing a hard time making Weld understand that. The interceptor classes
> are
> > in the classpath but I keep getting this error:
> >
> > WELD-001417: Enabled interceptor class
> > org.jboss.forge.addon.infinispan.MyInterceptor
> > (<class>org.jboss.forge.addon.infinispan.MyInterceptor</class> in
> > jar:file:/home/ggastald/.forge/addons/org-foo-foo-1-0-0-
> SNAPSHOT/foo-1.0.0-SNAPSHOT-forge-addon.jar!/META-INF/beans.xml@7)
> > does not match an interceptor bean: the class is not found, or not
> annotated
> > with @Interceptor and still not registered through a portable
> extension, or
> > not annotated with @Dependent inside an implicit bean archive
> >
> > I have beans.xml with annotated-mode="all". I even added the
@Dependent
> to
> > the interceptor class, but no luck. The current thread ClassLoader can
> > resolve the interceptor class also.
> >
> > I've opened https://issues.jboss.org/browse/FURNACE-145 with more
> information
> > on the subject, in case someone feels brave enough to help me out on
> this
> > :).
> >
> > I appreciate any help!
> >
> > Best Regards,
> >
> >
> >
> >
> >
> >
> >
> >
> > George Gastaldi
> >
> > Principal Software Engineer
> >
> > Red Hat
> >
> > Remote
> >
> > Joinville - Santa Catarina
> >
> > ggastald(a)redhat.com M: +55-47-99711-1000 <+55%2047%2099711-1000>
> > TRIED. TESTED. TRUSTED.
> > @redhatnews Red Hat Red Hat
> >
> >
> > _______________________________________________
> > weld-dev mailing list
> > weld-dev(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/weld-dev
> _______________________________________________
> weld-dev mailing list
> weld-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/weld-dev
>
10:42 a.m.
Ok, so when looking at FURNACE-145 and FURNACE-32 the problem seems to
be related to how Forge addons are isolated, right?
Martin
Dne 18.7.2017 v 17:48 George Gastaldi napsal(a):
Yes, please find attached a ZIP containing two addons.
To reproduce it, follow the steps:
1) Unzip the attached file (say in /tmp)
2) Start Forge
3) Run addon-build-and-install --project-root /tmp/infinispan
4) Run addon-build-and-install --project-root /tmp/foo
5) Stop Forge and start it again
6) In another bash window, run tail -f ~/.forge/log/forge.log and you
should see the Weld output.
7) If no errors are found, running the command "x" should print something
@Matej, same error using @Priority :(
I am still investigating
Best Regards,
George Gastaldi
Principal Software Engineer
Red Hat <https://www.redhat.com>
Remote
Joinville - Santa Catarina
ggastald(a)redhat.com <mailto:ggastald@redhat.com> M: +55-47-99711-1000
<tel:+55-47-99711-1000>
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
@redhatnews <https://twitter.com/redhatnews> Red Hat
<https://www.linkedin.com/company/red-hat> Red Hat
<https://www.facebook.com/RedHatInc>
On Tue, Jul 18, 2017 at 10:12 AM, Antoine Sabot-Durand <asd(a)redhat.com
<mailto:asd@redhat.com>> wrote:
Hi George,
Can you send us some code that we can easily run to reproduce your
issue ?
Thx
Antoine
On Tue, Jul 18, 2017 at 9:50 AM Matej Novotny <manovotn(a)redhat.com
<mailto:manovotn@redhat.com>> wrote:
Hi George
Forge addons are far from my range of expertise so I am just
going to shoot in the dark here :)
Make sure you have beans.xml (with discovery mode all and
enabled interceptor) in both JARS - the one which contains the
interceptor, as well as the one trying to use it.
If that doesn't work, try to tackle the interceptor a bit and
use @Priority as a means of enablement (this enables interceptor
globally as opposed to beans.xml which does that on
per-bean-archive basis).
Might not be what you seek but might also give us some
additional information on whats going wrong.
Matej
----- Original Message -----
> From: "George Gastaldi" <ggastald(a)redhat.com
<mailto:ggastald@redhat.com>>
> To: "Weld" <weld-dev(a)lists.jboss.org
<mailto:weld-dev@lists.jboss.org>>
> Sent: Tuesday, July 18, 2017 1:37:15 AM
> Subject: [weld-dev] WELD-001417 while enabling interceptors
in JBoss Forge addons
>
> Hello Welders !
>
> Not sure if this is the right mailing list, but worth a shot ;)
>
> I am trying to enable a CDI interceptor inside JBoss Forge
addons but I am
> facing a hard time making Weld understand that. The
interceptor classes are
> in the classpath but I keep getting this error:
>
> WELD-001417: Enabled interceptor class
> org.jboss.forge.addon.infinispan.MyInterceptor
> (<class>org.jboss.forge.addon.infinispan.MyInterceptor</class>
in
>
jar:file:/home/ggastald/.forge/addons/org-foo-foo-1-0-0-SNAPSHOT/foo-1.0.0-SNAPSHOT-forge-addon.jar!/META-INF/beans.xml@7)
> does not match an interceptor bean: the class is not found,
or not annotated
> with @Interceptor and still not registered through a portable
extension, or
> not annotated with @Dependent inside an implicit bean archive
>
> I have beans.xml with annotated-mode="all". I even added the
@Dependent to
> the interceptor class, but no luck. The current thread
ClassLoader can
> resolve the interceptor class also.
>
> I've opened https://issues.jboss.org/browse/FURNACE-145
<https://issues.jboss.org/browse/FURNACE-145> with more information
> on the subject, in case someone feels brave enough to help me
out on this
> :).
>
> I appreciate any help!
>
> Best Regards,
>
>
>
>
>
>
>
>
> George Gastaldi
>
> Principal Software Engineer
>
> Red Hat
>
> Remote
>
> Joinville - Santa Catarina
>
> ggastald(a)redhat.com <mailto:ggastald@redhat.com> M:
+55-47-99711-1000 <tel:+55%2047%2099711-1000>
> TRIED. TESTED. TRUSTED.
> @redhatnews Red Hat Red Hat
>
>
> _______________________________________________
> weld-dev mailing list
> weld-dev(a)lists.jboss.org <mailto:weld-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/weld-dev
<https://lists.jboss.org/mailman/listinfo/weld-dev>
_______________________________________________
weld-dev mailing list
weld-dev(a)lists.jboss.org <mailto:weld-dev@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/weld-dev
<https://lists.jboss.org/mailman/listinfo/weld-dev>
_______________________________________________
weld-dev mailing list
weld-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/weld-dev
--
Martin Kouba
Senior Software Engineer
Red Hat, Czech Republic
1:42 p.m.
Ah yes, turns out that I can't enable interceptors if the JARs are not read
by Weld, which I can't do because of classloading isolation.
I tried to explicitly add the interceptors but failed to do so, therefore I
closed the issue and introduced another Furnace implementation - still in
Alpha stage [1] which runs on a single Weld instance and works as expected.
[1] https://github.com/gastaldi/furnace-embedded
Best Regards,
George Gastaldi
Em 25 de jul de 2017 05:42, "Martin Kouba" <mkouba(a)redhat.com> escreveu:
Ok, so when looking at FURNACE-145 and FURNACE-32 the problem seems to be
related to how Forge addons are isolated, right?
Martin
Dne 18.7.2017 v 17:48 George Gastaldi napsal(a):
Yes, please find attached a ZIP containing two addons.
To reproduce it, follow the steps:
1) Unzip the attached file (say in /tmp)
2) Start Forge
3) Run addon-build-and-install --project-root /tmp/infinispan
4) Run addon-build-and-install --project-root /tmp/foo
5) Stop Forge and start it again
6) In another bash window, run tail -f ~/.forge/log/forge.log and you
should see the Weld output.
7) If no errors are found, running the command "x" should print something
@Matej, same error using @Priority :(
I am still investigating
Best Regards,
George Gastaldi
Principal Software Engineer
Red Hat <https://www.redhat.com>
Remote
Joinville - Santa Catarina
ggastald(a)redhat.com <mailto:ggastald@redhat.com> M: +55-47-99711-1000
<tel:+55-47-99711-1000>
<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
@redhatnews <https://twitter.com/redhatnews> Red Hat <
https://www.linkedin.com/company/red-hat> Red Hat <
https://www.facebook.com/RedHatInc>
On Tue, Jul 18, 2017 at 10:12 AM, Antoine Sabot-Durand <asd(a)redhat.com
<mailto:asd@redhat.com>> wrote:
Hi George,
Can you send us some code that we can easily run to reproduce your
issue ?
Thx
Antoine
On Tue, Jul 18, 2017 at 9:50 AM Matej Novotny <manovotn(a)redhat.com
<mailto:manovotn@redhat.com>> wrote:
Hi George
Forge addons are far from my range of expertise so I am just
going to shoot in the dark here :)
Make sure you have beans.xml (with discovery mode all and
enabled interceptor) in both JARS - the one which contains the
interceptor, as well as the one trying to use it.
If that doesn't work, try to tackle the interceptor a bit and
use @Priority as a means of enablement (this enables interceptor
globally as opposed to beans.xml which does that on
per-bean-archive basis).
Might not be what you seek but might also give us some
additional information on whats going wrong.
Matej
----- Original Message -----
> From: "George Gastaldi" <ggastald(a)redhat.com
<mailto:ggastald@redhat.com>>
> To: "Weld" <weld-dev(a)lists.jboss.org
<mailto:weld-dev@lists.jboss.org>>
> Sent: Tuesday, July 18, 2017 1:37:15 AM
> Subject: [weld-dev] WELD-001417 while enabling interceptors
in JBoss Forge addons
>
> Hello Welders !
>
> Not sure if this is the right mailing list, but worth a shot ;)
>
> I am trying to enable a CDI interceptor inside JBoss Forge
addons but I am
> facing a hard time making Weld understand that. The
interceptor classes are
> in the classpath but I keep getting this error:
>
> WELD-001417: Enabled interceptor class
> org.jboss.forge.addon.infinispan.MyInterceptor
> (<class>org.jboss.forge.addon.infinispan.MyInterceptor</class>
in
>
jar:file:/home/ggastald/.forge/addons/org-foo-foo-1-0-0-
SNAPSHOT/foo-1.0.0-SNAPSHOT-forge-addon.jar!/META-INF/beans.xml@7)
> does not match an interceptor bean: the class is not found,
or not annotated
> with @Interceptor and still not registered through a portable
extension, or
> not annotated with @Dependent inside an implicit bean archive
>
> I have beans.xml with annotated-mode="all". I even added the
@Dependent to
> the interceptor class, but no luck. The current thread
ClassLoader can
> resolve the interceptor class also.
>
> I've opened https://issues.jboss.org/browse/FURNACE-145
<https://issues.jboss.org/browse/FURNACE-145> with more
information
> on the subject, in case someone feels brave enough to help me
out on this
> :).
>
> I appreciate any help!
>
> Best Regards,
>
>
>
>
>
>
>
>
> George Gastaldi
>
> Principal Software Engineer
>
> Red Hat
>
> Remote
>
> Joinville - Santa Catarina
>
> ggastald(a)redhat.com <mailto:ggastald@redhat.com> M:
+55-47-99711-1000 <tel:+55%2047%2099711-1000>
> TRIED. TESTED. TRUSTED.
> @redhatnews Red Hat Red Hat
>
>
> _______________________________________________
> weld-dev mailing list
> weld-dev(a)lists.jboss.org <mailto:weld-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/weld-dev
<https://lists.jboss.org/mailman/listinfo/weld-dev>
_______________________________________________
weld-dev mailing list
weld-dev(a)lists.jboss.org <mailto:weld-dev@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/weld-dev
<https://lists.jboss.org/mailman/listinfo/weld-dev>
_______________________________________________
weld-dev mailing list
weld-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/weld-dev
--
Martin Kouba
Senior Software Engineer
Red Hat, Czech Republic
2460
days inactive
2468
days old
5 comments
4 participants
participants (4)
-
Antoine Sabot-Durand -
George Gastaldi -
Martin Kouba -
Matej Novotny