On Mon, Sep 9, 2024 at 3:36 PM Kabir Khan <kkhan@redhat.com> wrote:
Yeah we have three jobs running in parallel in the remote repository, although there could be more in the future, which the blocking job used to wait for. 

But IMO as long as the reporting stuff I added isn’t too fragile I actually prefer having them running in the cloud tests repo. My main concern was if we needed to split into more jobs to save space but I don’t think that is needed. And getting more familiar with this again, we’d just handle that the same way we do now with the cloud test reporter job waiting for the ones running the tests. 

+1


I forgot to mention there is a PAT needed with the repository permission for the dispatches. That is stored as a secret in both repos, and used by the parts of the scripts doing the remote repository dispatch. 

On Fri, 6 Sept 2024 at 18:41, Brian Stansberry <brian.stansberry@redhat.com> wrote:
Nice!

If we ever revisit moving these from wildfly-extras, it occurs to me that while that would add 3 more relatively long-running jobs per PR, what you've done here eliminates one: the current job that does the polling. So it's a net add of only 2 jobs, not 3.

On Fri, Sep 6, 2024 at 8:07 AM Kabir Khan <kkhan@redhat.com> wrote:
I have improved the error reporting mechanism now.

I did this in two phases

Previously the Cloud Tests Trigger workflow triggered by WIldFly PRs would wait until the test on the wildfly-cloud-tests side had completed. The remote job would communicate the status of the job via a push to a branch that the trigger was polling and monitoring for the commit with the status. I was never happy with this approach, and came across another way while adding CI somewhere else.

What happens now is the Cloud Tests Trigger issues a repository dispatch against the WIldFly Cloud Tests repository. This is the same as before, but now it returns immediately after the dispatch.
The dispatch is done cloud-test-pr-trigger.yml workflow, and the trigger-cloud-tests-pr event is handled on the cloud tests side by the wildfly-pull-request-runner.yml workflow.

The first thing that the wildfly-pull-request-runner.yml workflow does is, is a repository dispatch back to the wildfly repository to set the status of the job as pending. The report-cloud-tests-pr-pending event type is handled on the wildlfy side by cloud-test-pr-reporter.yml, which executes a call to add the status.

Once this is done, in the original PR, we see the 'Cloud Tests Trigger' job has completed, and there is a new entry called 'Cloud Tests Remote Run', which is in the pending status:
Screenshot 2024-09-06 at 13.51.50.png
 
The 'Details' link for 'Cloud Tests Remote Run' takes you to the workflow run on the wildfly-cloud-tests side.

Once all the tests are run, the cloud tests wildfly-pull-request-runner.yml reports the job status back to wildfly, with another repository dispatch. Again, the report-cloud-tests-pr-complete event type is handled on the wildfly side by cloud-test-pr-reporter.yml, which executes a call to update the status for the job on the PR. In this case the job passed 🥳:
Screenshot 2024-09-06 at 14.45.28.png
As before the 'Details' link takes you back to the job run on the cloud tests side. 

A small niggle is that the concurrency check on the WIldFly cloud tests side will cancel all running jobs.

What's the concurrency check?

Ah, as I write my brain guesses that it's the thing that happens if the PR branch is pushed again while jobs for a previous push are still running.

Yeah it cancels any in flight ones coming from the same repository (wildfly) and has the same pr number. This is by design, although maybe what I write sounded like it is a problem. 

The actual problem is that what I am doing in the reporter to check the status of each job falls over when the status of those jobs is cancelled rather than success/failure. I don’t think that will be hard to fix but decided to merge anyway since I don’t think it is a huge problem in practice :-)
 

This currently causes the status reported back to be 'failed' due to something I still need to figure out. Ideally that should be cancelled. However, this is a bit of a corner case, since once the job is cancelled, and the new job starts the status will correctly be reported as 'pending' again.

Yeah, doesn't sound like a big deal. <knocks-on-wood/>
I've improved on this a little bit. Actually, 'cancelled' isn't a valid status anyway, just 'pending', 'success' and 'error' + 'failure'. I've modified the end reporter to either report 'success' or 'failure'.

Sounds good.



Thanks,

Kabir

On Wed, 4 Sept 2024 at 18:00, Kabir Khan <kkhan@redhat.com> wrote:
I've implemented the space saving part, and I now think the tests can remain where they are.

I found that with the Kubernetes registry enabled I was able to push and pull images from it. If I disable it and enable it again, the images I pushed before restarting are no longer there. So it seems this cleans up the registry, and should give a big space saving. 

I added a kubernetes-ci profile used by the GitHub Actions workflow, which enables the registry before each test is run, and disables it after it is run [1]. Here I also clean the image for each test from the local docker registry, although here the space saving is less (I believe it is just a layer containing the test deployment on top of the pre-built server images).

For now I am keeping the server images built early on via the -Pimages flag, since I think the space saving from pruning the Kubernetes repository should be good enough for now. If this turns out to be a problem if we ever get a lot more tests and server images, I think I can do something in the scripts called by the kubernetes-ci profile to build those on demand, and remove them after the tests have completed.

The next step will be to look at the improved reporting back to the WIldFly PR I mentioned.


On Thu, 29 Aug 2024 at 15:30, Brian Stansberry <brian.stansberry@redhat.com> wrote:


On Thu, Aug 29, 2024 at 4:57 AM Kabir Khan <kkhan@redhat.com> wrote:
Ok, I vaguely thought about that too...

I can keep them in wildfly-extras for now, and improve the reporting as mentioned, and then look into how to deal with the space issue. I guess on the wildfly-extras side it will be a trigger job calling out to the other ones, so the overall status report probably will not be as tricky as I imagined.

Ok, good. 

An overall CI execution for a PR takes about 4.5 hours, due to the Windows jobs on TeamCity, so even if GH-action-based jobs ended up queuing sometimes it's unlikely to delay the entire PR cycle. These jobs take about 20 minutes and other ones we run should be faster. So really we shouldn't block moving things to wildfly. But optimizing any jobs that run in the wildfly GH org is important.


On Wed, 28 Aug 2024 at 16:53, Brian Stansberry <brian.stansberry@redhat.com> wrote:


On Wed, Aug 28, 2024 at 5:50 AM Kabir Khan <kkhan@redhat.com> wrote:
Hi,

These tests need some modernisation, and there are two things in my opinion that need addressing.

1 Space issues
Recently we were running out of space when running these tests. James fixed this by deleting the built WildFly, but when trying to resurrect an old PR I had forgotten all about, we ran out of space again. 

I believe the issue is that the way the tests work at the moment, which is to:
* Start minikube with the registry
* Build all the test images
* Run all the tests

Essentially we end up building all the server images (different layers) before running the tests, which takes space, and then each test installs the image into minikube's registry. Also, some tests also install other images (e.g postgres, strimzi) into the minikube instance.

My initial thought was that it would be good to build the server images more on demand, rather than before the tests, and to be able to call 'docker system prune' now and again.

However, this does not take into account the minikube registry, which will also accumulate a lot of images. It will at least become populated with the test images, I am unsure if it also becomes populated with the images pulled from elsewhere (i.e. postgres, strimzi etc)?

If `minikube addons disable registry` followed by a 'minikube addons enable registry' deletes the registry contents from the disk, having a hook to do that between each test could be something easy to look into. Does anyone know if this is the case?

An alternative could be to have one job building wildfly, and uploading the maven repository as an artifact, and then have separate jobs to run each test (or perhaps set of tests requiring the same WildFly server image). However, as this test is quite fiddly since it runs remotely, I'm not sure how the reporting would look.

2 Pull request trigger
PRs in wildfly/wildfly execute a remote dispatch which results in the job getting run in the wildfly-extras/wildfly-cloud-tests repository.

There is no reporting back from the wildfly-extras/wildfly-cloud-tests repository about the run id of the resulting run.

What I did when I implemented this was to have the calling wildfly/wildfly job wait and poll a branch in wildfly-extras/wildfly-cloud-tests for the results of the job (IIRC I have a file with the triggering PR number). The job on the other side would then write to this branch once the job is done. Which is all quite ugly!

However, playing in other repositories, I found https://www.kenmuse.com/blog/creating-github-checks/. Basically this would result in
* the WIldFly pull request trigger completing immediately once it has done the remote dispatch
* When the wildfly-cloud-tests job starts it will do a remote dispatch to wildfly, which will get picked up by a workflow which can add a status check on the PR conversation page saying remote testing in wildfly-cloud-tests is in progres
* Once the wildfly-cloud-tests job is done, it will do another remote dispatch to wildfly, which will update the status check with success/failure

So we'd have two checks in the section rather than the current one.


Other ideas
While writing the above, the following occurred to me.

The reason for the split is that the cloud test framework is quite involved, and IMO does not belong in WildFly. So the remote dispatch approach was used.

However, I wonder now if a saner approach would be to update the wildfly-cloud-tests workflow to be reusable so they can be used from WildFly?

That would allow the tests, test framework etc., and the workflow to continue to live in wildfly-cloud-tests, while running in wildfly itself. That should get rid of the remote dispatch issues, and make that side of things simpler.

It does not address the space issue, but I think if this approach works, it will be easier to deal with the space issue.

A downside is that means the 3 actual test jobs (e.g. https://github.com/wildfly-extras/wildfly-cloud-tests/actions/runs/10583924772) run using the wildfly GH org's set of runners.

Relying on wildfly-extras to get around that is a hack though. But if we're going to move these I think we need to optimize as much as possible, e.g. not rebuild WildFly multiple times.


Any thoughts/insights are welcome.


Thanks,

Kabir








_______________________________________________
wildfly-dev mailing list -- wildfly-dev@lists.jboss.org
To unsubscribe send an email to wildfly-dev-leave@lists.jboss.org
Privacy Statement: https://www.redhat.com/en/about/privacy-policy
List Archives: https://lists.jboss.org/archives/list/wildfly-dev@lists.jboss.org/message/PCHKQZDV7DLNZ3N2NEA2GFZ2CJZAJY72/


--
Brian Stansberry
Principal Architect, Red Hat JBoss EAP
WildFly Project Lead
He/Him/His


--
Brian Stansberry
Principal Architect, Red Hat JBoss EAP
WildFly Project Lead
He/Him/His


--
Brian Stansberry
Principal Architect, Red Hat JBoss EAP
WildFly Project Lead
He/Him/His


--
Brian Stansberry
Principal Architect, Red Hat JBoss EAP
WildFly Project Lead
He/Him/His