[aerogear-dev] Issues with Aerogear on Cordova

Sebastien Blanc scm.blanc at gmail.com
Fri Feb 21 10:10:23 EST 2014


Hey Miguel,
My PHP is a bit rusty but could you just try by passing 'badge' as a int
and not a String so just:

 'badge'    => 1

I know that in the java client version we explicitly convert the badge
always to an int.



On Fri, Feb 21, 2014 at 3:44 PM, Miguel Lemos <miguel21op at gmail.com> wrote:

> Hi,
>
> I already did a > cat server.log | grep payload < to the log file on the
> server and -  as expected -  the string is arriving empty to it. You can
> see a notification that is "sane" (sent through the console)  and just
> above another that  isn't. Of course the construction of the Json string is
> not as I expected by observing the console CURL example that's given.
>
> Further research needed...
>
> 2014/02/21 09:11:30,414 INFO
> [org.jboss.aerogear.unifiedpush.service.sender.impl.SenderServiceImpl] (EJB
> default - 6) Processing send request with 'UnifiedPushMessage
> [criteria=[aliases=null, deviceTypes=null, categories=null, variants=null],
> simplePush=null, alert=null, sound=null, badge=-1, data=null,
> time-to-live=-1]' payload
> 2014/02/21 09:19:56,907 INFO
> [org.jboss.aerogear.unifiedpush.service.sender.impl.SenderServiceImpl] (EJB
> default - 7) Processing send request with 'UnifiedPushMessage
> [criteria=[aliases=null, deviceTypes=null, categories=null, variants=null],
> simplePush=null, alert=Isto, sound=null, badge=1, data={aviso=Qualquer
> coisa, mais=otra coisa}, tim
>
>
> On Fri, Feb 21, 2014 at 9:32 AM, Sebastien Blanc <scm.blanc at gmail.com>wrote:
>
>> You can get the logs from the UPS server on Openshift, you have to SSH
>> into it (Instructions are on the application page, on the right "remote
>> access").
>> Once you are logged in , just do "vi aerogear-push/logs/server.log" . You
>> will a LOT of logs :) but you should also see the String that you have
>> submitted, from there you can see what is wrong or even better paste it
>> here.
>>
>>
>> On Fri, Feb 21, 2014 at 10:27 AM, Miguel Lemos <miguel21op at gmail.com>wrote:
>>
>>> Yes. I think it's only a small thing about the structure of the json
>>> data I'm sending...
>>>
>>>
>>> Enviado do meu iPhone
>>>
>>> No dia 21/02/2014, às 09:17, Matthias Wessendorf <matzew at apache.org>
>>> escreveu:
>>>
>>> Oh - I just see the PHP client supports some sort of older API we used
>>> to have in the past:
>>>
>>>
>>> https://github.com/tmccarthy9/aerogear-unified-push-php-client/blob/master/src/SenderClient.php#L103
>>>
>>> Since the intern left, nobody was actually paying too much attention on
>>> the PHP client - we are mostly Java Weenies :)
>>>
>>>
>>>
>>> On Fri, Feb 21, 2014 at 10:10 AM, Miguel Lemos <miguel21op at gmail.com>wrote:
>>>
>>>> OK. I'll give it a try. In any case can someone explain what's wrong
>>>> with my string? I think that's the only problem.
>>>>
>>>> Thanks again for the swift response.
>>>>
>>>> M
>>>>
>>>>
>>>> On Fri, Feb 21, 2014 at 9:01 AM, Matthias Wessendorf <matzew at apache.org
>>>> > wrote:
>>>>
>>>>> Hey Miguel,
>>>>>
>>>>> we had an intern working on a PHP client, last year
>>>>>
>>>>>  here is is project:
>>>>> https://github.com/tmccarthy9/aerogear-unified-push-php-client
>>>>>
>>>>> I know he has been testing it against our server - perhaps that
>>>>> library is handy for you ?
>>>>>
>>>>> Btw. if you feel to make changes to the given PHP client, feel free to
>>>>> send PullRequests against the repo, we will be able to merge them
>>>>>
>>>>> -Matthias
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Fri, Feb 21, 2014 at 9:54 AM, Miguel Lemos <miguel21op at gmail.com>wrote:
>>>>>
>>>>>> Hi!
>>>>>>
>>>>>> I'm trying to create a php batch to test faster my notifications. So
>>>>>> I did this (simplified example):
>>>>>>
>>>>>> $ch = curl_init('https://aerogear-metalpush.rhcloud.com/rest/sender'
>>>>>> );
>>>>>>
>>>>>> $data = array(
>>>>>>     'message' => array(
>>>>>>         'atl'    => 'Aviso',
>>>>>>         'avs'    => 'Mensagem',
>>>>>>         'badge'    => '1'
>>>>>>     )
>>>>>> );
>>>>>>
>>>>>> $data_st = json_encode($data);
>>>>>> $headers = array("Accept: application/json", "Content-Type:
>>>>>> application/json");
>>>>>> curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, 6);
>>>>>> curl_setopt($ch, CURLOPT_CUSTOMREQUEST, "POST");
>>>>>> curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);
>>>>>> curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
>>>>>> curl_setopt($ch, CURLOPT_USERPWD, "$key:$secret");
>>>>>> curl_setopt($ch, CURLOPT_HTTPHEADER,
>>>>>> $headers);
>>>>>> curl_setopt($ch, CURLOPT_POSTFIELDS, $data_st);
>>>>>>
>>>>>> $result = curl_exec($ch);
>>>>>>
>>>>>> I think that's something wrong with the $data array because the
>>>>>> server returns: "
>>>>>> *The request sent by the client was syntactically incorrect (). *
>>>>>>
>>>>>> If I strip the string from the "message"  it returns "job submitted",
>>>>>> but of course I don't receive nothing.
>>>>>>
>>>>>> Thanks again
>>>>>>
>>>>>> M
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Thu, Feb 20, 2014 at 8:48 AM, Sebastien Blanc <scm.blanc at gmail.com
>>>>>> > wrote:
>>>>>>
>>>>>>> This is really cool Miguel !
>>>>>>> Don't hesitate to ask us other questions and also , like you did
>>>>>>> with your screenshot, give us feedback !
>>>>>>> Thanks again for your interest in the project.
>>>>>>> Sebi
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Thu, Feb 20, 2014 at 9:43 AM, Miiguel Lemos <miguel21op at gmail.com
>>>>>>> > wrote:
>>>>>>>
>>>>>>>> Not all, but a couple of steps on the right direction, I hope ;-)
>>>>>>>>
>>>>>>>> Enviado do meu iPad
>>>>>>>>
>>>>>>>> No dia 19/02/2014, às 21:20, Matthias Wessendorf <matzew at apache.org>
>>>>>>>> escreveu:
>>>>>>>>
>>>>>>>> Nice!
>>>>>>>>
>>>>>>>> Glad you are all set!
>>>>>>>>
>>>>>>>> -Matthias
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Feb 19, 2014 at 4:38 PM, Miguel Lemos <miguel21op at gmail.com
>>>>>>>> > wrote:
>>>>>>>>
>>>>>>>>> A small souvenir ;-)
>>>>>>>>>
>>>>>>>>> Thanks again
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Feb 19, 2014 at 3:20 PM, Miguel Lemos <
>>>>>>>>> miguel21op at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Hi Matthias,
>>>>>>>>>>
>>>>>>>>>> Maybe I didn't make myself clear, but your answer was clear
>>>>>>>>>> enough to respond to my post :-)
>>>>>>>>>>
>>>>>>>>>> Thanks again.
>>>>>>>>>>
>>>>>>>>>> Carry on!
>>>>>>>>>>
>>>>>>>>>> M
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Feb 19, 2014 at 3:05 PM, Matthias Wessendorf <
>>>>>>>>>> matzew at apache.org> wrote:
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Feb 19, 2014 at 3:43 PM, Miguel Lemos <
>>>>>>>>>>> miguel21op at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Dear Matthias,
>>>>>>>>>>>>
>>>>>>>>>>>> According to the information posted in the url below, I can
>>>>>>>>>>>> send (and read) several parameters / keys in the scope of the notification
>>>>>>>>>>>> service (as it should be...):
>>>>>>>>>>>>
>>>>>>>>>>>> http://aerogear.org/docs/specs/aerogear-push-messages/
>>>>>>>>>>>>
>>>>>>>>>>>> According to the values on it, the receiver should have the
>>>>>>>>>>>> capacity to decide what to do next.
>>>>>>>>>>>>
>>>>>>>>>>>> First, and the easiest thing: don't show  the "Alert" text, but
>>>>>>>>>>>> any other part of  content received and / or change "Alert" to  another
>>>>>>>>>>>> language, for instance.
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Not sure I follow.
>>>>>>>>>>>
>>>>>>>>>>> The 'alert' is a keyword on iOS, which our server (and our
>>>>>>>>>>> Cordova Libs) do recognize. What do you want to change there ?
>>>>>>>>>>> For the completion of our spec, we are showing all of the
>>>>>>>>>>> keywords, that are supported.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Second, if I create (for instance) a lat, lon and rad
>>>>>>>>>>>> parameters, I can decide if I show the notification immediately, or only
>>>>>>>>>>>> when the user reaches a matchable location, within a given radius.
>>>>>>>>>>>> This is just an example of the freedom that must be available
>>>>>>>>>>>> to decide what to do according to a given parameter that the software on
>>>>>>>>>>>> the client's side can interpret. The message itself may not be the most
>>>>>>>>>>>> important part of the whole thing...
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> If you don't want or need that alert, simply leave it our of the
>>>>>>>>>>> payload. It's just part of the demo/docs as that is quite handy to get
>>>>>>>>>>> going.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> So, the question is: how can I read those parameters / keys
>>>>>>>>>>>> before deciding to do with the notification? Through a "regular" object
>>>>>>>>>>>> keys iterator? Thank you very much again. If there's some place in the
>>>>>>>>>>>> documentation where I can understand that, please let me know.
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> yes, like here (using alert just as an example):
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>  function onNotification(e) {
>>>>>>>>>>>      alert(e.payload.foo);
>>>>>>>>>>>      alert(e.payload.key);
>>>>>>>>>>>   }
>>>>>>>>>>>
>>>>>>>>>>> And the curl for that would be something _like_ this:
>>>>>>>>>>> curl -3 -u "ID:secrect" -v -H "Accept: application/json" -H
>>>>>>>>>>> "Content-type: application/json" -X POST -d '{"message": {"foo":"bar
>>>>>>>>>>> value", "key":"HELLO"}}'
>>>>>>>>>>> https://something-doamin.rhcloud.com/rest/sender
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> -Matthias
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Miguel
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Feb 19, 2014 at 1:34 PM, Matthias Wessendorf <
>>>>>>>>>>>> matzew at apache.org> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Awesome,
>>>>>>>>>>>>>
>>>>>>>>>>>>> we are interested in hearing your feedback.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Good luck w/ the development process!
>>>>>>>>>>>>>
>>>>>>>>>>>>> -Matthias
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Feb 19, 2014 at 2:29 PM, Miguel Lemos <
>>>>>>>>>>>>> miguel21op at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks. Of course I'll give you my feedback ;-)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I've some questions about the service as a whole, but I'll
>>>>>>>>>>>>>> make some more testing and then I'll let you know.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thank you very much again for your attention.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> All the best,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Miguel
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, Feb 19, 2014 at 1:25 PM, Matthias Wessendorf <
>>>>>>>>>>>>>> matzew at apache.org> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, Feb 19, 2014 at 2:18 PM, Miguel Lemos <
>>>>>>>>>>>>>>> miguel21op at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi Matthias,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> One of the biggest reasons I'm testing this solutions is
>>>>>>>>>>>>>>>> because iOS!
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Once we already developed a full native Android push
>>>>>>>>>>>>>>>> (considering geofencing)  notification service. The issue is to port our
>>>>>>>>>>>>>>>> solution to iOS (not only the notifications, but everything). That's why
>>>>>>>>>>>>>>>> I'm personally testing Cordova on Android and already partially on IOS. So
>>>>>>>>>>>>>>>> far so good..
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Sounds very interesting. If you are interested, let us know
>>>>>>>>>>>>>>> how it goes.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I'm starting with Android because it's easier to me. But
>>>>>>>>>>>>>>>> next week I want to test your solution  with iOS. Why? Is there any problem?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> No problem there at all :-) I was just curious if you target
>>>>>>>>>>>>>>> Android first/only.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Greetings,
>>>>>>>>>>>>>>> Matthias
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Miguel
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Wed, Feb 19, 2014 at 1:04 PM, Matthias Wessendorf <
>>>>>>>>>>>>>>>> matzew at apache.org> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Wed, Feb 19, 2014 at 1:20 PM, Miguel Lemos <
>>>>>>>>>>>>>>>>> miguel21op at gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi all,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I tested and now it works, thanks.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> glad it all worked out
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> When I tried for  the first time, I tried with the
>>>>>>>>>>>>>>>>>> function global, reflecting the Github example. But as it didn't work
>>>>>>>>>>>>>>>>>> (because of the "damn" URL issue...) I tried several things, one of them
>>>>>>>>>>>>>>>>>> being put the alert function inside the deviceready event. Of course, when
>>>>>>>>>>>>>>>>>> I solved the URL thing I never more remembered to put it outside again...
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Things like that might happen.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Regarding the URL, we will try to update the OpenShift
>>>>>>>>>>>>>>>>> blog post.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I just checkout project documentation, and it looks like
>>>>>>>>>>>>>>>>> they are already 'right'.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Wondering: Are you building Cordova clients for Android
>>>>>>>>>>>>>>>>> only, or do you plan to use the iOS platform as well ?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Greetings,
>>>>>>>>>>>>>>>>> Matthias
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Matthias Wessendorf
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> blog: http://matthiaswessendorf.wordpress.com/
>>>>>>>>>>>>>>>>> sessions: http://www.slideshare.net/mwessendorf
>>>>>>>>>>>>>>>>> twitter: http://twitter.com/mwessendorf
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Matthias Wessendorf
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> blog: http://matthiaswessendorf.wordpress.com/
>>>>>>>>>>>>>>> sessions: http://www.slideshare.net/mwessendorf
>>>>>>>>>>>>>>> twitter: http://twitter.com/mwessendorf
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> Matthias Wessendorf
>>>>>>>>>>>>>
>>>>>>>>>>>>> blog: http://matthiaswessendorf.wordpress.com/
>>>>>>>>>>>>> sessions: http://www.slideshare.net/mwessendorf
>>>>>>>>>>>>> twitter: http://twitter.com/mwessendorf
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> Matthias Wessendorf
>>>>>>>>>>>
>>>>>>>>>>> blog: http://matthiaswessendorf.wordpress.com/
>>>>>>>>>>> sessions: http://www.slideshare.net/mwessendorf
>>>>>>>>>>> twitter: http://twitter.com/mwessendorf
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> aerogear-dev mailing list
>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Matthias Wessendorf
>>>>>>>>
>>>>>>>> blog: http://matthiaswessendorf.wordpress.com/
>>>>>>>> sessions: http://www.slideshare.net/mwessendorf
>>>>>>>> twitter: http://twitter.com/mwessendorf
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> aerogear-dev mailing list
>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> aerogear-dev mailing list
>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> aerogear-dev mailing list
>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> aerogear-dev mailing list
>>>>>> aerogear-dev at lists.jboss.org
>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Matthias Wessendorf
>>>>>
>>>>> blog: http://matthiaswessendorf.wordpress.com/
>>>>> sessions: http://www.slideshare.net/mwessendorf
>>>>> twitter: http://twitter.com/mwessendorf
>>>>>
>>>>> _______________________________________________
>>>>> aerogear-dev mailing list
>>>>> aerogear-dev at lists.jboss.org
>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> aerogear-dev mailing list
>>>> aerogear-dev at lists.jboss.org
>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>
>>>
>>>
>>>
>>> --
>>> Matthias Wessendorf
>>>
>>> blog: http://matthiaswessendorf.wordpress.com/
>>> sessions: http://www.slideshare.net/mwessendorf
>>> twitter: http://twitter.com/mwessendorf
>>>
>>> _______________________________________________
>>> aerogear-dev mailing list
>>> aerogear-dev at lists.jboss.org
>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>
>>>
>>> _______________________________________________
>>> aerogear-dev mailing list
>>> aerogear-dev at lists.jboss.org
>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>
>>
>>
>> _______________________________________________
>> aerogear-dev mailing list
>> aerogear-dev at lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>
>
>
> _______________________________________________
> aerogear-dev mailing list
> aerogear-dev at lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.jboss.org/pipermail/aerogear-dev/attachments/20140221/f9d77659/attachment-0001.html 


More information about the aerogear-dev mailing list