[aerogear-dev] Issues with Aerogear on Cordova
Miguel Lemos
miguel21op at gmail.com
Fri Feb 21 10:17:06 EST 2014
Hy guys (and gals),
As I told you before, once we made a native push notifications service for
Android, under a totally different scope.
We also did an API for third parties to access our platform.
I attach the document about it. As you can see the approach used is quite
different, but I think the info is quite clear (of course that project was
much less complex than yours...).
This is a very important subject. And I think that BEFORE anything else,
the documentation must be placed in one single spot, very well written, and
thorough, to minimize the learning curve, which is a critical thing to
avoid people to go away, and give the solution an opportunity to get
traction.
PS - The doc attached is for private use.
On Fri, Feb 21, 2014 at 2:40 PM, Burr Sutter <bsutter at redhat.com> wrote:
> This is a great tip - when I was fighting through this same issue - I
> would have loved to know about the log file.
>
> Perhaps we can make the error response include:
> the sent erroneous message
> and a link to an example of a proper message in our wiki
>
>
>
> On Feb 21, 2014, at 4:32 AM, Sebastien Blanc <scm.blanc at gmail.com> wrote:
>
> You can get the logs from the UPS server on Openshift, you have to SSH
> into it (Instructions are on the application page, on the right "remote
> access").
> Once you are logged in , just do "vi aerogear-push/logs/server.log" . You
> will a LOT of logs :) but you should also see the String that you have
> submitted, from there you can see what is wrong or even better paste it
> here.
>
>
> On Fri, Feb 21, 2014 at 10:27 AM, Miguel Lemos <miguel21op at gmail.com>wrote:
>
>> Yes. I think it's only a small thing about the structure of the json data
>> I'm sending...
>>
>>
>> Enviado do meu iPhone
>>
>> No dia 21/02/2014, às 09:17, Matthias Wessendorf <matzew at apache.org>
>> escreveu:
>>
>> Oh - I just see the PHP client supports some sort of older API we used to
>> have in the past:
>>
>>
>> https://github.com/tmccarthy9/aerogear-unified-push-php-client/blob/master/src/SenderClient.php#L103
>>
>> Since the intern left, nobody was actually paying too much attention on
>> the PHP client - we are mostly Java Weenies :)
>>
>>
>>
>> On Fri, Feb 21, 2014 at 10:10 AM, Miguel Lemos <miguel21op at gmail.com>wrote:
>>
>>> OK. I'll give it a try. In any case can someone explain what's wrong
>>> with my string? I think that's the only problem.
>>>
>>> Thanks again for the swift response.
>>>
>>> M
>>>
>>>
>>> On Fri, Feb 21, 2014 at 9:01 AM, Matthias Wessendorf <matzew at apache.org>wrote:
>>>
>>>> Hey Miguel,
>>>>
>>>> we had an intern working on a PHP client, last year
>>>>
>>>> here is is project:
>>>> https://github.com/tmccarthy9/aerogear-unified-push-php-client
>>>>
>>>> I know he has been testing it against our server - perhaps that library
>>>> is handy for you ?
>>>>
>>>> Btw. if you feel to make changes to the given PHP client, feel free to
>>>> send PullRequests against the repo, we will be able to merge them
>>>>
>>>> -Matthias
>>>>
>>>>
>>>>
>>>>
>>>> On Fri, Feb 21, 2014 at 9:54 AM, Miguel Lemos <miguel21op at gmail.com>wrote:
>>>>
>>>>> Hi!
>>>>>
>>>>> I'm trying to create a php batch to test faster my notifications. So I
>>>>> did this (simplified example):
>>>>>
>>>>> $ch = curl_init('https://aerogear-metalpush.rhcloud.com/rest/sender');
>>>>>
>>>>> $data = array(
>>>>> 'message' => array(
>>>>> 'atl' => 'Aviso',
>>>>> 'avs' => 'Mensagem',
>>>>> 'badge' => '1'
>>>>> )
>>>>> );
>>>>>
>>>>> $data_st = json_encode($data);
>>>>> $headers = array("Accept: application/json", "Content-Type:
>>>>> application/json");
>>>>> curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, 6);
>>>>> curl_setopt($ch, CURLOPT_CUSTOMREQUEST, "POST");
>>>>> curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);
>>>>> curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
>>>>> curl_setopt($ch, CURLOPT_USERPWD, "$key:$secret");
>>>>> curl_setopt($ch, CURLOPT_HTTPHEADER,
>>>>> $headers);
>>>>> curl_setopt($ch, CURLOPT_POSTFIELDS, $data_st);
>>>>>
>>>>> $result = curl_exec($ch);
>>>>>
>>>>> I think that's something wrong with the $data array because the server
>>>>> returns: "
>>>>> *The request sent by the client was syntactically incorrect (). *
>>>>>
>>>>> If I strip the string from the "message" it returns "job submitted",
>>>>> but of course I don't receive nothing.
>>>>>
>>>>> Thanks again
>>>>>
>>>>> M
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Thu, Feb 20, 2014 at 8:48 AM, Sebastien Blanc <scm.blanc at gmail.com>wrote:
>>>>>
>>>>>> This is really cool Miguel !
>>>>>> Don't hesitate to ask us other questions and also , like you did with
>>>>>> your screenshot, give us feedback !
>>>>>> Thanks again for your interest in the project.
>>>>>> Sebi
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Thu, Feb 20, 2014 at 9:43 AM, Miiguel Lemos <miguel21op at gmail.com>wrote:
>>>>>>
>>>>>>> Not all, but a couple of steps on the right direction, I hope ;-)
>>>>>>>
>>>>>>> Enviado do meu iPad
>>>>>>>
>>>>>>> No dia 19/02/2014, às 21:20, Matthias Wessendorf <matzew at apache.org>
>>>>>>> escreveu:
>>>>>>>
>>>>>>> Nice!
>>>>>>>
>>>>>>> Glad you are all set!
>>>>>>>
>>>>>>> -Matthias
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Feb 19, 2014 at 4:38 PM, Miguel Lemos <miguel21op at gmail.com>wrote:
>>>>>>>
>>>>>>>> A small souvenir ;-)
>>>>>>>>
>>>>>>>> Thanks again
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Feb 19, 2014 at 3:20 PM, Miguel Lemos <miguel21op at gmail.com
>>>>>>>> > wrote:
>>>>>>>>
>>>>>>>>> Hi Matthias,
>>>>>>>>>
>>>>>>>>> Maybe I didn't make myself clear, but your answer was clear enough
>>>>>>>>> to respond to my post :-)
>>>>>>>>>
>>>>>>>>> Thanks again.
>>>>>>>>>
>>>>>>>>> Carry on!
>>>>>>>>>
>>>>>>>>> M
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Feb 19, 2014 at 3:05 PM, Matthias Wessendorf <
>>>>>>>>> matzew at apache.org> wrote:
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Feb 19, 2014 at 3:43 PM, Miguel Lemos <
>>>>>>>>>> miguel21op at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Dear Matthias,
>>>>>>>>>>>
>>>>>>>>>>> According to the information posted in the url below, I can send
>>>>>>>>>>> (and read) several parameters / keys in the scope of the notification
>>>>>>>>>>> service (as it should be...):
>>>>>>>>>>>
>>>>>>>>>>> http://aerogear.org/docs/specs/aerogear-push-messages/
>>>>>>>>>>>
>>>>>>>>>>> According to the values on it, the receiver should have the
>>>>>>>>>>> capacity to decide what to do next.
>>>>>>>>>>>
>>>>>>>>>>> First, and the easiest thing: don't show the "Alert" text, but
>>>>>>>>>>> any other part of content received and / or change "Alert" to another
>>>>>>>>>>> language, for instance.
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Not sure I follow.
>>>>>>>>>>
>>>>>>>>>> The 'alert' is a keyword on iOS, which our server (and our
>>>>>>>>>> Cordova Libs) do recognize. What do you want to change there ?
>>>>>>>>>> For the completion of our spec, we are showing all of the
>>>>>>>>>> keywords, that are supported.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Second, if I create (for instance) a lat, lon and rad
>>>>>>>>>>> parameters, I can decide if I show the notification immediately, or only
>>>>>>>>>>> when the user reaches a matchable location, within a given radius.
>>>>>>>>>>> This is just an example of the freedom that must be available to
>>>>>>>>>>> decide what to do according to a given parameter that the software on the
>>>>>>>>>>> client's side can interpret. The message itself may not be the most
>>>>>>>>>>> important part of the whole thing...
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> If you don't want or need that alert, simply leave it our of the
>>>>>>>>>> payload. It's just part of the demo/docs as that is quite handy to get
>>>>>>>>>> going.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> So, the question is: how can I read those parameters / keys
>>>>>>>>>>> before deciding to do with the notification? Through a "regular" object
>>>>>>>>>>> keys iterator? Thank you very much again. If there's some place in the
>>>>>>>>>>> documentation where I can understand that, please let me know.
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> yes, like here (using alert just as an example):
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> function onNotification(e) {
>>>>>>>>>> alert(e.payload.foo);
>>>>>>>>>> alert(e.payload.key);
>>>>>>>>>> }
>>>>>>>>>>
>>>>>>>>>> And the curl for that would be something _like_ this:
>>>>>>>>>> curl -3 -u "ID:secrect" -v -H "Accept: application/json" -H
>>>>>>>>>> "Content-type: application/json" -X POST -d '{"message": {"foo":"bar
>>>>>>>>>> value", "key":"HELLO"}}'
>>>>>>>>>> https://something-doamin.rhcloud.com/rest/sender
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> -Matthias
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Miguel
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Feb 19, 2014 at 1:34 PM, Matthias Wessendorf <
>>>>>>>>>>> matzew at apache.org> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Awesome,
>>>>>>>>>>>>
>>>>>>>>>>>> we are interested in hearing your feedback.
>>>>>>>>>>>>
>>>>>>>>>>>> Good luck w/ the development process!
>>>>>>>>>>>>
>>>>>>>>>>>> -Matthias
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Feb 19, 2014 at 2:29 PM, Miguel Lemos <
>>>>>>>>>>>> miguel21op at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks. Of course I'll give you my feedback ;-)
>>>>>>>>>>>>>
>>>>>>>>>>>>> I've some questions about the service as a whole, but I'll
>>>>>>>>>>>>> make some more testing and then I'll let you know.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thank you very much again for your attention.
>>>>>>>>>>>>>
>>>>>>>>>>>>> All the best,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Miguel
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Feb 19, 2014 at 1:25 PM, Matthias Wessendorf <
>>>>>>>>>>>>> matzew at apache.org> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, Feb 19, 2014 at 2:18 PM, Miguel Lemos <
>>>>>>>>>>>>>> miguel21op at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Matthias,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> One of the biggest reasons I'm testing this solutions is
>>>>>>>>>>>>>>> because iOS!
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Once we already developed a full native Android push
>>>>>>>>>>>>>>> (considering geofencing) notification service. The issue is to port our
>>>>>>>>>>>>>>> solution to iOS (not only the notifications, but everything). That's why
>>>>>>>>>>>>>>> I'm personally testing Cordova on Android and already partially on IOS. So
>>>>>>>>>>>>>>> far so good..
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Sounds very interesting. If you are interested, let us know
>>>>>>>>>>>>>> how it goes.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I'm starting with Android because it's easier to me. But
>>>>>>>>>>>>>>> next week I want to test your solution with iOS. Why? Is there any problem?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> No problem there at all :-) I was just curious if you target
>>>>>>>>>>>>>> Android first/only.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Greetings,
>>>>>>>>>>>>>> Matthias
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Miguel
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, Feb 19, 2014 at 1:04 PM, Matthias Wessendorf <
>>>>>>>>>>>>>>> matzew at apache.org> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Wed, Feb 19, 2014 at 1:20 PM, Miguel Lemos <
>>>>>>>>>>>>>>>> miguel21op at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi all,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I tested and now it works, thanks.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> glad it all worked out
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> When I tried for the first time, I tried with the
>>>>>>>>>>>>>>>>> function global, reflecting the Github example. But as it didn't work
>>>>>>>>>>>>>>>>> (because of the "damn" URL issue...) I tried several things, one of them
>>>>>>>>>>>>>>>>> being put the alert function inside the deviceready event. Of course, when
>>>>>>>>>>>>>>>>> I solved the URL thing I never more remembered to put it outside again...
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Things like that might happen.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Regarding the URL, we will try to update the OpenShift blog
>>>>>>>>>>>>>>>> post.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I just checkout project documentation, and it looks like
>>>>>>>>>>>>>>>> they are already 'right'.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Wondering: Are you building Cordova clients for Android
>>>>>>>>>>>>>>>> only, or do you plan to use the iOS platform as well ?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Greetings,
>>>>>>>>>>>>>>>> Matthias
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> Matthias Wessendorf
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> blog: http://matthiaswessendorf.wordpress.com/
>>>>>>>>>>>>>>>> sessions: http://www.slideshare.net/mwessendorf
>>>>>>>>>>>>>>>> twitter: http://twitter.com/mwessendorf
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Matthias Wessendorf
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> blog: http://matthiaswessendorf.wordpress.com/
>>>>>>>>>>>>>> sessions: http://www.slideshare.net/mwessendorf
>>>>>>>>>>>>>> twitter: http://twitter.com/mwessendorf
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Matthias Wessendorf
>>>>>>>>>>>>
>>>>>>>>>>>> blog: http://matthiaswessendorf.wordpress.com/
>>>>>>>>>>>> sessions: http://www.slideshare.net/mwessendorf
>>>>>>>>>>>> twitter: http://twitter.com/mwessendorf
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Matthias Wessendorf
>>>>>>>>>>
>>>>>>>>>> blog: http://matthiaswessendorf.wordpress.com/
>>>>>>>>>> sessions: http://www.slideshare.net/mwessendorf
>>>>>>>>>> twitter: http://twitter.com/mwessendorf
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> aerogear-dev mailing list
>>>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> aerogear-dev mailing list
>>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Matthias Wessendorf
>>>>>>>
>>>>>>> blog: http://matthiaswessendorf.wordpress.com/
>>>>>>> sessions: http://www.slideshare.net/mwessendorf
>>>>>>> twitter: http://twitter.com/mwessendorf
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> aerogear-dev mailing list
>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> aerogear-dev mailing list
>>>>>>> aerogear-dev at lists.jboss.org
>>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> aerogear-dev mailing list
>>>>>> aerogear-dev at lists.jboss.org
>>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> aerogear-dev mailing list
>>>>> aerogear-dev at lists.jboss.org
>>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Matthias Wessendorf
>>>>
>>>> blog: http://matthiaswessendorf.wordpress.com/
>>>> sessions: http://www.slideshare.net/mwessendorf
>>>> twitter: http://twitter.com/mwessendorf
>>>>
>>>> _______________________________________________
>>>> aerogear-dev mailing list
>>>> aerogear-dev at lists.jboss.org
>>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>>
>>>
>>>
>>> _______________________________________________
>>> aerogear-dev mailing list
>>> aerogear-dev at lists.jboss.org
>>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>>
>>
>>
>>
>> --
>> Matthias Wessendorf
>>
>> blog: http://matthiaswessendorf.wordpress.com/
>> sessions: http://www.slideshare.net/mwessendorf
>> twitter: http://twitter.com/mwessendorf
>>
>> _______________________________________________
>> aerogear-dev mailing list
>> aerogear-dev at lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>
>>
>> _______________________________________________
>> aerogear-dev mailing list
>> aerogear-dev at lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>>
>
> _______________________________________________
> aerogear-dev mailing list
> aerogear-dev at lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>
>
>
> _______________________________________________
> aerogear-dev mailing list
> aerogear-dev at lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/aerogear-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.jboss.org/pipermail/aerogear-dev/attachments/20140221/73d3f1d8/attachment-0001.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: infosptmetal.pdf
Type: application/pdf
Size: 1280722 bytes
Desc: not available
Url : http://lists.jboss.org/pipermail/aerogear-dev/attachments/20140221/73d3f1d8/attachment-0001.pdf
More information about the aerogear-dev
mailing list