[cdi-dev] CDI and generics
Matus Abaffy
maabaffy at redhat.com
Fri Jul 19 07:23:25 EDT 2013
Marko,
I have a possibly very stupid answer:
There is a recursive DEFINITION of when a parameterized bean type (bean type parameter) is considered *assignable*. The bullets you mention are under this definition. However, only the first bullet, which uses the phrase "according to these rules" (= according to this definition), states something about *assignability* of a bean type parameter. All the others talk about assignability of actual types/bounds/... which is defined elsewhere. (I.e. this definition has no effect on whether "the actual type of ... is assignable to ...")
I believe this is what the author wanted to say. Maybe another (italic) font should be used for the word *assignable* when used in the newly defined meaning.
Matus
----- Original Message -----
From: "Marko Lukša" <marko.luksa at gmail.com>
To: cdi-dev at lists.jboss.org
Sent: Friday, July 19, 2013 12:05:41 PM
Subject: Re: [cdi-dev] CDI and generics
I have a possibly very stupid question:
Do the words "assignable to" in the bullets in section 5.2.4 refer to assignability according to the rules in that same section or to java assignability rules? The first bullet specifically says "...is assignable to ... according to these rules ", while all the other bullets simply say "is assignable to".
Since this whole section is talking about assignability, I would expect every "is assignable to" to mean "is assignable to according to these rules", but others think otherwise - mainly because the first bullet specifically states "according to these rules" and others don't.
Marko
On 16.7.2013 13:19, Arne Limburg wrote:
Makes sense to me. So we have to revert the change of CDI-85?
Regards,
Arne
Von: Marko Lukša < marko.luksa at gmail.com >
Datum: Dienstag, 16. Juli 2013 12:31
An: Romain Manni-Bucau < rmannibucau at gmail.com >
Cc: " cdi-dev at lists.jboss.org " < cdi-dev at lists.jboss.org >
Betreff: Re: [cdi-dev] CDI and generics
Looking at [1] again, I see the mistake now:
while MediumClass is assignable to SmallClass, ArrayList<MediumClass> is NOT assignable to ArrayList<SmallClass> (this is a common mistake - see [2]).
So, given the following:
> public class C1<T extends MediumClass> { > @Produces ... ArrayList<T> m1() > > @Inject ... ArrayList<SmallClass> s1; > @Inject ... ArrayList<BigClass> b1;
s1 needs an object that is exactly an ArrayList<SmallClass> and b1 needs exactly ArrayList<BigClass>.
The producer method is able to produce ArrayList<MediumClass> and ArrayList<BigClass>. It is NOT able to produce ArrayList<SmallClass>. Therefore s1 cannot be satisfied.
The original wording in the CDI 1.0 spec was correct:
" - the required type parameter is an actual type, the bean type parameter is a type variable and the actual type is assignable *to* the upper bound, if any, of the type variable "
s1: the required type parameter is the actual type SmallClass, the bean type parameter is a type variable with upper bound MediumClass. The actual type is not assignable to the upper bound (SmallClass is not assignable to MediumClass), therefore s1 cannot be satisfied.
b1: the required type parameter is the actual type BigClass, the bean type parameter is a type variable with upper bound MediumClass. The actual type IS assignable to the upper bound (BigClass is assignable to MediumClass), therefore b1 can be satisfied.
[1] http://lists.jboss.org/pipermail/weld-dev/2010-August/002627.html
[2] http://docs.oracle.com/javase/tutorial/java/generics/inheritance.html
Marko
On 16.7.2013 9:36, Romain Manni-Bucau wrote:
no no, what i say is CDI could handle generic beans as template it would duplicate as many time as needed to match all instances. the same as for @Dependent but with the scope you want. there is no technical blocking point.
Romain Manni-Bucau
Twitter: @rmannibucau
Blog: http://rmannibucau.wordpress.com/
LinkedIn: http://fr.linkedin.com/in/rmannibucau
Github: https://github.com/rmannibucau
2013/7/16 Marko Lukša < marko.luksa at gmail.com >
Yes, you'd need an extension that registers multiple beans. But that's how it needs to be.
It's not sad. This simply can't work. If you inject the same instance into both @Inject List<String> stringList and @Inject List<Integer> integerList, then the user can do this:
stringList.add("some string");
integerList.add(15);
for (String str : stringList) {
System.out.println(str);
}
which would result in a ClassCastException, right?
Marko
On 16.7.2013 9:23, Romain Manni-Bucau wrote:
hmm, and if you don't want a @Dependent? it is doable through an extension but not through declaration, that's sad IMO
Romain Manni-Bucau
Twitter: @rmannibucau
Blog: http://rmannibucau.wordpress.com/
LinkedIn: http://fr.linkedin.com/in/rmannibucau
Github: https://github.com/rmannibucau
2013/7/16 Marko Lukša < marko.luksa at gmail.com >
What Arne was concerned about is that we cannot inject the same instance into two different typed injection points. We can't have an object that is a list of strings and a list of integers at the same time. We would need such an object if we wanted to inject it into both @Inject List<String> and @Inject List<Integer>.
What I pointed out is that CDI has this covered, as it requires all beans with a parameterized bean class to be dependent scoped and by definition not sharable across multiple injection points. CDI will create a _new instance_ for each injection point, therefore it actually can inject bean MyClass<T> into both @Inject MyClass<String> and @Inject MyClass<Integer>, since it injects two different instances. There is no need to have a custom extension and register MyClass<T> multiple times (as MyClass<String>, MyClass<Integer>, etc.).
So this means the change at [1] was a mistake.
[1] https://github.com/cdi-spec/cdi/commit/b32243350ace6a0bba337f91a35f5fd05c151f14
Marko
On 16.7.2013 7:17, Romain Manni-Bucau wrote:
Hmm not sure i get the Dependent limit. Using a custom extension you'll register the same bean as many times as needed but using different values for parameters and the scope you want.
Why CDI wouldnt be able of it out of the box?
It is really something basic in 2013 and find really sad that's look so complicated. Please explain me what i'm missing if so.
Le 16 juil. 2013 00:15, "Marko Lukša" < marko.luksa at gmail.com > a écrit :
Actually, it will never be the same instance, since all beans with a parameterized bean class must be @Dependent scoped.
Marko
On 15.7.2013 23:46, Arne Limburg wrote:
No, I understood you right ;-)
In Java the same instance cannot be MyClass<String> and MyClass<Integer> at the same time.
We would do exactly that, if we had two injection points like
@Inject
MyClass<String> myStringClass;
@Inject
MyClass<Integer> myIntegerClass;
In plain java this could never be the same instances without heavy (compile-time) casting, thus this should not be the same instances in CDI.
Cheers,
Arne
Von: Romain Manni-Bucau < rmannibucau at gmail.com >
Datum: Montag, 15. Juli 2013 23:41
An: Arne Limburg < arne.limburg at openknowledge.de >
Cc: Mark Struberg < struberg at yahoo.de >, Martin Kouba < mkouba at redhat.com >, " cdi-dev at lists.jboss.org " < cdi-dev at lists.jboss.org >
Betreff: Re: [cdi-dev] CDI and generics
hmm think you misunderstood what i said (sorry if it was unclear)
basically my point was a generic bean or produced bean should be injectable everywhere so MyClass<T> should match @Inject MyClass<String>. In plain java we do: new MyClass<String>().
Romain Manni-Bucau
Twitter: @rmannibucau
Blog: http://rmannibucau.wordpress.com/
LinkedIn: http://fr.linkedin.com/in/rmannibucau
Github: https://github.com/rmannibucau
2013/7/15 Arne Limburg < arne.limburg at openknowledge.de >
Hi Romain,
In plain old java the behavior would depend on where the type variable is declared.
See the following samples:
public class MyClass<T> {
List<T> myList = new ArrayList<T>();
List<String> myStringList = myList;
}
public class MyClass {
<T> List<T> myList() {
return new ArrayList<T>();
}
List<String> myStringList = myList();
}
The first example does not work and the second works.
And even, if you would access myList from outside, the first example just works, if you instantiate myClass with the type argument:
List<String> myStringList = new MyClass<String>().myList;
To transfer this to CDI: We would need an instance of Bean MyClass with MyClass<String> in the type closure. And we would have to do this for every type argument that can be found within the injection points, i.e., if we had the injection points
@Inject
MyClass<String> myStringClass;
@Inject
MyClass<Integer> myIntegerClass;
either the type closure of my class would have to contain MyClass<String> AND MyClass<Integer> or we would need to have different beans for both types. I think, we cannot do either.
I suggest to handle TypeVariables declared at class level different than TypeVariables declared at (producer-)method level. Thus we could handle Mark Strubergs case and leave the rest like it is in plain old java.
I suggest to change the fourth bullet po int of chapter 5.2.4:
"the required type parameter is an actual type, the bean type parameter is a type variable that is declared at class level and the actual type is assignable from the upper bound of the type variable,"
and add another bullet point:
"the required type parameter is an actual type, the bean type parameter is a type variable that is declared at method level and the actual type is assignable to the upper bound of the type variable, or"
And add a footnote: "If no explicit upper bound is defined, the implicit upper bound java.lang.Object is assumed"
BTW. Should we create a spec issue for that?
WDYT?
Regards,
Arne
P.S.: I don't think this is a backward compatibility issue, just because Weld and OpenWebBeans implemented it differently in the past. It just was not clear in 1.0 and is not in 1.1. The misleading part is the "if any" in the fourth bullet point. A TypeVariable ALWAYS has an upper bound. "If no bound is given for a type variable, Object is assumed" (Java Lang Spec 4.4)
Von: Romain Manni-Bucau < rmannibucau at gmail.com >
Datum: Montag, 15. Juli 2013 07:55
An: Mark Struberg < struberg at yahoo.de >
Cc: Martin Kouba < mkouba at redhat.com >, Arne Limburg < arne.limburg at openknowledge.de >, " cdi-dev at lists.jboss.org " < cdi-dev at lists.jboss.org >
Betreff: Re: [cdi-dev] CDI and generics
+1, if we are no more aligned on something so simple in plain java we are useless i fear :(
(i used and saw it used in a lot of real apps)
Romain Manni-Bucau
Twitter: @rmannibucau
Blog: http://rmannibucau.wordpress.com/
LinkedIn: http://fr.linkedin.com/in/rmannibucau
Github: https://github.com/rmannibucau
2013/7/14 Mark Struberg < struberg at yahoo.de >
folks, this breaks backward compatibility
In CDI 1.0 it was perfectly fine to do the following
@Produces
@Dependent
public <KEY, VALUE extends Serializable> Cache<KEY, VALUE> getDefaultCache(InjectionPoint injectionPoint) {
Type ipType = injectionPoint.getType();
String cacheName = null;
if (ipType instanceof ParameterizedType) {
ParameterizedType generic = (ParameterizedType) ipType;
Type[] paramTypes = generic.getActualTypeArguments();
if (paramTypes == null || paramTypes.length != 2) {
throw new RuntimeException("illegal param types for generic type " + ipType);
}
if (paramTypes[1] instanceof Class) {
cacheName = ((Class) paramTypes[1]).getSimpleName();
}
else {
cacheName = paramTypes[1].toString();
}
}
return getCache(cacheName);
}
usage:
@Inject
private Cache<String, IdmUser> userCache;
With your new interpretation you basically trash this, right?
For having a generic producer you would need to create a distinct producer method for each and every usage. This just doesn't work out in practice...
LieGrue,
strub
----- Original Message -----
From: Martin Kouba < mkouba at redhat.com >
To: Arne Limburg < arne.limburg at openknowledge.de >
Cc: " cdi-dev at lists.jboss.org " < cdi-dev at lists.jboss.org >
Sent: Wednesday, 10 July 2013, 14:01
Subject: Re: [cdi-dev] CDI and generics
No, it's not necessary. We'll fix this within CDITCK-349 [1]. Leave a
comment if you wish :-)
Thanks
Martin
[1]
https://issues.jboss.org/browse/CDITCK-349
Dne 10.7.2013 13:52, Arne Limburg napsal(a):
> OK, so shall I create a TCK issue for that?
>
>
> Cheers,
> Arne
>
> Am 10.07.13 13:50 schrieb "Martin Kouba" unter < mkouba at redhat.com >:
>
>> Hi Arne,
>>
>> I think so (except the required type is Baz<List<Qux>>) - there is no
>> bean with assignable bean type for this IP (according to CDI 1.1 rules
>> of course).
>>
>> Martin
>>
>> Dne 10.7.2013 13:16, Arne Limburg napsal(a):
>>> Hi Martin,
>>>
>>> So, which bean should be injected into
>>> @Inject
>>> private Baz<List<T2>> t2BazList;
>>> ?
>>>
>>> Baz<T> is also not assignable to Baz<List<String>>, because List<String>
>>> is also not assignable from Object.
>>>
>>>
>>> Am I right, that the test should throw an
>>> UnsatisfiedResolutionException?
>>>
>>> Cheers,
>>> Arne
>>>
>>> Am 08.07.13 12:17 schrieb "Martin Kouba" unter < mkouba at redhat.com >:
>>>
>>>> Re Arne's question:
>>>> Yes, Baz is a managed bean and AmbiguousResolutionException should not
>>>> be thrown because Qux is not a managed bean (doesn't have a public
>>>> no-arg constructor).
>>>>
>>>> Re Marko's findings:
>>>> Yes, the TCK assertions are not up to date and Baz<T> is not assignable
>>>> to Baz<String>, because String is not assignable from Object (no bound
>>>> is defined -> Object is assumed; see JSL 4.4). So I confirm a TCK
>>>> issue.
>>>>
>>>> IMO this would deserve a proper cleanup...
>>>>
>>>> Martin
>>>>
>>>> Dne 8.7.2013 01:22, Marko Lukša napsal(a):
>>>>> I'd say it's a bug. While Baz indeed is a managed bean, it shouldn't
>>>>> be
>>>>> injected into injection point with type Baz<String> nor
>>>>> Baz<List<Qux>>.
>>>>> So I believe you're right in saying that this test should fail with
>>>>> UnsatisfiedResolutionException.
>>>>>
>>>>> There was a change made to the spec way back in 2010 (see [1]), but
>>>>> the
>>>>> TCK apparently wasn't updated then. I've filed an issue in the TCK
>>>>> jira
>>>>> [2].
>>>>>
>>>>> The problem isn't only in the TCK, but also in the spec itself. Some
>>>>> of
>>>>> the examples in section 5.2.4 don't conform to the rules defined in
>>>>> the
>>>>> same section (according to the rules, bean Dao<T extends Persistent>
>>>>> shouldn't be eligible for injection into Dao<Order> or Dao<User>). I
>>>>> remember asking about this a year ago ([3]), but I didn't articulate
>>>>> the
>>>>> problem properly.
>>>>>
>>>>> [1]
>>>>>
>>>>>
>>>>> https://github.com/cdi-spec/cdi/commit/b32243350ace6a0bba337f91a35f5fd0
>>>>> 5c
>>>>> 151f14
>>>>> [2] https://issues.jboss.org/browse/CDITCK-349
>>>>> [3] http://lists.jboss.org/pipermail/cdi-dev/2012-April/001742.html
>>>>>
>>>>> Marko
>>>>>
>>>>> On 7.7.2013 16:04, Arne Limburg wrote:
>>>>>> Hi all,
>>>>>>
>>>>>> At the OpenWebBeans list we are currently discussing handling of
>>>>>> generics in CDI.
>>>>>> I found a test in the CDI 1.1 TCK, which imho has a bug. The test
>>>>>> is
>>>>>>
>>>>>> org.jboss.cdi.tck.tests.inheritance.generics.MemberLevelInheritanceTes
>>>>>> t
>>>>>> and the (simplified) deployment scenario is the following:
>>>>>>
>>>>>> public class Baz<T> {
>>>>>> }
>>>>>>
>>>>>> public class Qux extends Baz<String> {
>>>>>> }
>>>>>>
>>>>>> @Vetoed
>>>>>> public class Bar<T1, T2> {
>>>>>> @Inject
>>>>>> private Baz<T1> baz;
>>>>>> @Inject
>>>>>> private Baz<List<T2>> t2BazList;
>>>>>> }
>>>>>>
>>>>>> @RequestScoped
>>>>>> public class Foo extends Bar<String, Qux> {
>>>>>> }
>>>>>>
>>>>>> public class Producer {
>>>>>> @Produces
>>>>>> @Amazing
>>>>>> public String produceString() {
>>>>>> return "ok";
>>>>>> }
>>>>>>
>>>>>> @Produces
>>>>>> public String[] produceStringArray() {
>>>>>> return new String[0];
>>>>>> }
>>>>>>
>>>>>> @Produces
>>>>>> public Baz<Baz<Qux>> produceBazBazQux() {
>>>>>> return new Baz();
>>>>>> }
>>>>>> }
>>>>>>
>>>>>> The class Bar has some more injection points, but that does not
>>>>>> matter.
>>>>>> Due to the TCK this deployment should work, but I don't know how.
>>>>>> Question: Is Baz a Bean (I suppose so) and may it be injected into
>>>>>> Bean Foo, more precisely into the second injection point of class
>>>>>> Bar?
>>>>>> - If yes, it also should be injected into the first injection
>>>>>> point, right? This would lead to an AmbiguousResolutionException
>>>>>> since
>>>>>> Qux may also be injected into the first injection point.
>>>>>> - If no, the deployment should fail with a
>>>>>> UnsatisfiedResolutionException since there is no Bean that can be
>>>>>> injected into that injection point.
>>>>>>
>>>>>> Is this a bug in the TCK and if not, how is this supposed to work?
>>>>>>
>>>>>> Cheers,
>>>>>> Arne
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> cdi-dev mailing list
>>>>>> cdi-dev at lists.jboss.org
>>>>>> https://lists.jboss.org/mailman/listinfo/cdi-dev
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> cdi-dev mailing list
>>>>> cdi-dev at lists.jboss.org
>>>>> https://lists.jboss.org/mailman/listinfo/cdi-dev
>>>>>
>>>> _______________________________________________
>>>> cdi-dev mailing list
>>>> cdi-dev at lists.jboss.org
>>>> https://lists.jboss.org/mailman/listinfo/cdi-dev
>>>
>
_______________________________________________
cdi-dev mailing list
cdi-dev at lists.jboss.org
https://lists.jboss.org/mailman/listinfo/cdi-dev
_______________________________________________
cdi-dev mailing list
cdi-dev at lists.jboss.org
https://lists.jboss.org/mailman/listinfo/cdi-dev
_______________________________________________
cdi-dev mailing list cdi-dev at lists.jboss.org https://lists.jboss.org/mailman/listinfo/cdi-dev
_______________________________________________
cdi-dev mailing list
cdi-dev at lists.jboss.org
https://lists.jboss.org/mailman/listinfo/cdi-dev
_______________________________________________
cdi-dev mailing list
cdi-dev at lists.jboss.org
https://lists.jboss.org/mailman/listinfo/cdi-dev
More information about the cdi-dev
mailing list