[hibernate-commits] Hibernate SVN: r17605 - in beanvalidation/tck/trunk: src/main/assembly and 1 other directories.
hibernate-commits at lists.jboss.org
hibernate-commits at lists.jboss.org
Thu Oct 1 08:25:37 EDT 2009
Author: hardy.ferentschik
Date: 2009-10-01 08:25:36 -0400 (Thu, 01 Oct 2009)
New Revision: 17605
Removed:
beanvalidation/tck/trunk/src/main/docbook/en-US/eclipse-debugging.xml
beanvalidation/tck/trunk/src/main/docbook/en-US/eclipse-running.xml
beanvalidation/tck/trunk/src/main/docbook/en-US/images/
Modified:
beanvalidation/tck/trunk/pom.xml
beanvalidation/tck/trunk/src/main/assembly/assembly.xml
beanvalidation/tck/trunk/src/main/docbook/en-US/Author_Group.xml
beanvalidation/tck/trunk/src/main/docbook/en-US/Book_Info.xml
beanvalidation/tck/trunk/src/main/docbook/en-US/Book_Preface.xml
beanvalidation/tck/trunk/src/main/docbook/en-US/appeals-process.xml
beanvalidation/tck/trunk/src/main/docbook/en-US/configuration.xml
beanvalidation/tck/trunk/src/main/docbook/en-US/executing.xml
beanvalidation/tck/trunk/src/main/docbook/en-US/installation.xml
beanvalidation/tck/trunk/src/main/docbook/en-US/introduction.xml
beanvalidation/tck/trunk/src/main/docbook/en-US/part-execution.xml
beanvalidation/tck/trunk/src/main/docbook/en-US/part-test-harness.xml
beanvalidation/tck/trunk/src/main/docbook/en-US/reporting.xml
Log:
updated to the tck docs
Modified: beanvalidation/tck/trunk/pom.xml
===================================================================
--- beanvalidation/tck/trunk/pom.xml 2009-10-01 08:14:40 UTC (rev 17604)
+++ beanvalidation/tck/trunk/pom.xml 2009-10-01 12:25:36 UTC (rev 17605)
@@ -91,7 +91,6 @@
<sourceDirectory>${basedir}/src/main/docbook</sourceDirectory>
<masterTranslation>en-US</masterTranslation>
<imageResource>
- <directory>${basedir}/src/main/docbook/en-US/images</directory>
<directory>${basedir}/src/main/docbook/en-US/harness</directory>
</imageResource>
<formats>
Modified: beanvalidation/tck/trunk/src/main/assembly/assembly.xml
===================================================================
--- beanvalidation/tck/trunk/src/main/assembly/assembly.xml 2009-10-01 08:14:40 UTC (rev 17604)
+++ beanvalidation/tck/trunk/src/main/assembly/assembly.xml 2009-10-01 12:25:36 UTC (rev 17605)
@@ -10,16 +10,28 @@
</formats>
<dependencySets>
<dependencySet>
- <useProjectArtifact>true</useProjectArtifact>
+ <useProjectArtifact>false</useProjectArtifact>
<outputDirectory>lib</outputDirectory>
<scope>runtime</scope>
- <excludes>
- <exclude>com.googlecode.jtype:jtype</exclude>
- </excludes>
</dependencySet>
</dependencySets>
<fileSets>
<fileSet>
+ <directory>target</directory>
+ <outputDirectory/>
+ <excludes>
+ <exclude>*-javadoc.jar</exclude>
+ <exclude>*-sources.jar</exclude>
+ </excludes>
+ <includes>
+ <include>jsr303-tck-*.jar</include>
+ </includes>
+ </fileSet>
+ <fileSet>
+ <directory>target/docbook/publish/en-US</directory>
+ <outputDirectory>docs/manual</outputDirectory>
+ </fileSet>
+ <fileSet>
<directory>${project.basedir}</directory>
<outputDirectory>src</outputDirectory>
<includes>
@@ -34,12 +46,19 @@
</fileSet>
<fileSet>
<directory>${project.basedir}/src/main/resources</directory>
- <outputDirectory>lib</outputDirectory>
+ <outputDirectory>/</outputDirectory>
<includes>
<include>tck-tests.xml</include>
</includes>
</fileSet>
<fileSet>
+ <directory>${project.basedir}/src/main/resources</directory>
+ <outputDirectory>/</outputDirectory>
+ <includes>
+ <include>tck-audit.xml</include>
+ </includes>
+ </fileSet>
+ <fileSet>
<directory>${project.basedir}/target</directory>
<outputDirectory>/</outputDirectory>
<includes>
Modified: beanvalidation/tck/trunk/src/main/docbook/en-US/Author_Group.xml
===================================================================
--- beanvalidation/tck/trunk/src/main/docbook/en-US/Author_Group.xml 2009-10-01 08:14:40 UTC (rev 17604)
+++ beanvalidation/tck/trunk/src/main/docbook/en-US/Author_Group.xml 2009-10-01 12:25:36 UTC (rev 17605)
@@ -2,31 +2,19 @@
<!DOCTYPE authorgroup PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [ ]>
<authorgroup>
<author>
- <firstname>Gavin</firstname>
- <surname>King</surname>
+ <firstname>Emmanuel</firstname>
+ <surname>Bernard</surname>
<affiliation>
- <jobtitle>JSR-299: Contexts and Dependency Injection (CDI) for Java EE
- specification lead</jobtitle>
+ <jobtitle>JSR-303: Bean Validation specification lead</jobtitle>
<orgname>Red Hat Inc.</orgname>
</affiliation>
</author>
<author>
- <firstname>Pete</firstname>
- <surname>Muir</surname>
+ <firstname>Hardy</firstname>
+ <surname>Ferentschik</surname>
<affiliation>
- <jobtitle>CDI TCK lead</jobtitle>
+ <jobtitle>Bean Validation TCK Developer</jobtitle>
<orgname>Red Hat Inc.</orgname>
</affiliation>
</author>
- <author>
- <firstname>Dan</firstname>
- <surname>Allen</surname>
- <affiliation>
- <jobtitle>CDI TCK developer</jobtitle>
- <orgname>Red Hat Inc.</orgname>
- </affiliation>
- </author>
-<!--
-vim: ts=3:sw=3:tw=80:set expandtab
--->
</authorgroup>
Modified: beanvalidation/tck/trunk/src/main/docbook/en-US/Book_Info.xml
===================================================================
--- beanvalidation/tck/trunk/src/main/docbook/en-US/Book_Info.xml 2009-10-01 08:14:40 UTC (rev 17604)
+++ beanvalidation/tck/trunk/src/main/docbook/en-US/Book_Info.xml 2009-10-01 12:25:36 UTC (rev 17605)
@@ -12,18 +12,32 @@
See the License for the specific language governing permissions and
limitations under the License.</literallayout></releaseinfo>
- <title>Technology Compatibility Kit Reference Guide for JSR-303: Bean
- Validation</title>
+ <title>Technology Compatibility Kit Reference Guide for JSR-303: Bean Validation</title>
<subtitle>Specification Lead: Red Hat Inc.</subtitle>
<copyright>
- <year>2009 </year>
+ <year>2009</year>
<holder>Red Hat Middleware, LCC.</holder>
</copyright>
- <!--
-vim: ts=3:sw=3:tw=80:set expandtab
--->
+ <authorgroup>
+ <author>
+ <firstname>Emmanuel</firstname>
+ <surname>Bernard</surname>
+ <affiliation>
+ <jobtitle>JSR-303: Bean Validation specification lead</jobtitle>
+ <orgname>Red Hat Inc.</orgname>
+ </affiliation>
+ </author>
+ <author>
+ <firstname>Hardy</firstname>
+ <surname>Ferentschik</surname>
+ <affiliation>
+ <jobtitle>Bean Validation TCK Developer</jobtitle>
+ <orgname>Red Hat Inc.</orgname>
+ </affiliation>
+ </author>
+ </authorgroup>
</bookinfo>
Modified: beanvalidation/tck/trunk/src/main/docbook/en-US/Book_Preface.xml
===================================================================
--- beanvalidation/tck/trunk/src/main/docbook/en-US/Book_Preface.xml 2009-10-01 08:14:40 UTC (rev 17604)
+++ beanvalidation/tck/trunk/src/main/docbook/en-US/Book_Preface.xml 2009-10-01 12:25:36 UTC (rev 17605)
@@ -6,7 +6,7 @@
<para>This guide describes how to download, install, configure, and run the
Technology Compatibility Kit (TCK) used to verify the compatibility of an
- implementation of the JSR-303: Bean Validation specification.</para>
+ implementation of JSR-303: Bean Validation specification.</para>
<para>The Bean Validation TCK is built atop the JBoss Test Harness, a
portable and configurable automated test suite for authoring unit and
@@ -18,7 +18,7 @@
2.0</ulink>.</para>
<section id="target-audience">
- <title>Who Should Use This Book</title>
+ <title>Who Should Use This Guide</title>
<para>This guide is for implementors of the Bean Validation specification
to assist in running the test suite that verifies the compatibility of
@@ -26,12 +26,12 @@
</section>
<section id="before-reading">
- <title>Before You Read This Book</title>
+ <title>Before You Read This Guide</title>
<para>The Bean Validation TCK is based on the Bean Validation
specification 1.0 (JSR-303). Information about the specification,
including links to the specification documents, can be found on the <ulink
- url="http://jcp.org/en/jsr/detail?id=299">JSR-303 JCP page</ulink>.</para>
+ url="http://jcp.org/en/jsr/detail?id=303">JSR-303 JCP page</ulink>.</para>
<para>Before running the tests in the Bean Validation TCK, read and become
familiar with the JBoss Test Harness Reference Guide (pending), which
@@ -39,7 +39,7 @@
</section>
<section id="book-organization">
- <title>How This Book Is Organized</title>
+ <title>How This Guide Is Organized</title>
<para>If you are running the Bean Validation TCK for the first time, read
<xref linkend="introduction" /> and <xref
@@ -94,18 +94,6 @@
</listitem>
<listitem>
- <para><xref linkend="eclipse-running" /> shows how to run individual
- tests in Eclipse and advises the best way to setup your Eclipse
- workspace for running the tests.</para>
- </listitem>
-
- <listitem>
- <para><xref linkend="eclipse-debugging" /> builds on <xref
- linkend="eclipse-running" /> by detailing how to debug individual
- tests in Eclipse.</para>
- </listitem>
-
- <listitem>
<para><xref linkend="test-harness" /> includes excerpts from the JBoss
Test Harness Reference Guide. How to configure the JBoss Test Harness
as it relates to the Bean Validation TCK is presented in <xref
Modified: beanvalidation/tck/trunk/src/main/docbook/en-US/appeals-process.xml
===================================================================
--- beanvalidation/tck/trunk/src/main/docbook/en-US/appeals-process.xml 2009-10-01 08:14:40 UTC (rev 17604)
+++ beanvalidation/tck/trunk/src/main/docbook/en-US/appeals-process.xml 2009-10-01 12:25:36 UTC (rev 17605)
@@ -52,7 +52,7 @@
<title>How these challenges are submitted?</title>
<para>To submit a challenge, a new issue should be created in the <ulink
- url="https://jira.jboss.org/jira/browse/WBTCK">HV project</ulink> of the
+ url="https://jira.jboss.org/jira/browse/HV">HV project</ulink> of the
JBoss JIRA using the Issue Type: Bug. The appellant should complete the
Summary, Component (TCK Appeal), Environment and Description Field only.
Any communication regarding the issue should be pursed in the comments of
@@ -75,11 +75,11 @@
Validation TCK Project Lead, as designated by Specification Lead, Red Hat
Middleware LLC. or his/her designate. The appellant can also monitor the
process by following the issue report filed in the <ulink
- url="https://jira.jboss.org/jira/browse/WBTCK">HV project</ulink> of the
+ url="https://jira.jboss.org/jira/browse/HV">HV project</ulink> of the
JBoss JIRA.</para>
<para>The current TCK Project Lead is listed on the <ulink type=""
- url="https://jira.jboss.org/jira/browse/WBTCK" userlevel="">HV Project
+ url="https://jira.jboss.org/jira/browse/HV" userlevel="">HV Project
Summary Page</ulink> on the JBoss JIRA.</para>
</section>
Modified: beanvalidation/tck/trunk/src/main/docbook/en-US/configuration.xml
===================================================================
--- beanvalidation/tck/trunk/src/main/docbook/en-US/configuration.xml 2009-10-01 08:14:40 UTC (rev 17604)
+++ beanvalidation/tck/trunk/src/main/docbook/en-US/configuration.xml 2009-10-01 12:25:36 UTC (rev 17605)
@@ -53,8 +53,7 @@
</literal></entry>
<entry>Directory containing extra JARs you want placed in artifact
- library directory such as the porting package
- implementation.</entry>
+ library directory.</entry>
</row>
<row>
@@ -94,14 +93,13 @@
<literal>org.jboss.testharness.spi.Containers</literal>, which handles
deploying the test artifact to the container. An implementations of this
API is already available for JBoss AS 5.1. Therefore, you only need to
- implement this part of the porting package if you wish to use another
- container.</para>
+ implement this if you wish to use another container.</para>
<note id="deployment-api-contributions">
- <para>Red Hat Middleware LLC encourages CDI implementators to contribute
- JBoss Test Harness Deployment API implementations for other containers
- under the ASL license. Please contact the Bean Validation TCK
- lead.</para>
+ <para>Red Hat Middleware LLC encourages Bean Validation implementators
+ to contribute JBoss Test Harness Deployment API implementations for
+ other containers under the ASL license. Please contact the Bean
+ Validation TCK lead.</para>
</note>
</section>
@@ -120,13 +118,13 @@
for an implementation to pass the TCK. This file also allows tests to be
excluded from a run:</para>
- <programlisting><suite name="JSR-299 TCK" verbose="2">
- <test name="JSR-299 TCK">
+ <programlisting><suite name="JSR-303 TCK" verbose="2">
+ <test name="JSR-303 TCK">
...
<classes>
- <class name="org.jboss.jsr299.tck.tests.context.application.ApplicationContextTest">
+ <class name="org.hibernate.jsr303.tck.tests.bootstrap.ValidationProviderTest">
<methods>
- <exclude name="testApplicationScopeActiveDuringServiceMethod"/>
+ <exclude name="testFirstMatchingValidationProviderResolverIsReturned"/>
</methods>
</class>
</classes>
@@ -145,8 +143,8 @@
<para>It's beyond the scope of this guide to describe in how to set up
your build environment to run the TCK. The JBoss Test Harness guide
- describes how Web Beans uses Maven 2 to execute the Bean Validation TCK.
- See <xref linkend="test-suite-runner" />. The TestNG documentation
+ describes how Bean Validation uses Maven 2 to execute the Bean Validation
+ TCK. See <xref linkend="test-suite-runner" />. The TestNG documentation
provides extensive information on launching TestNG using the Java, Ant,
Eclipse or IntellJ IDEA.</para>
</section>
Deleted: beanvalidation/tck/trunk/src/main/docbook/en-US/eclipse-debugging.xml
===================================================================
--- beanvalidation/tck/trunk/src/main/docbook/en-US/eclipse-debugging.xml 2009-10-01 08:14:40 UTC (rev 17604)
+++ beanvalidation/tck/trunk/src/main/docbook/en-US/eclipse-debugging.xml 2009-10-01 12:25:36 UTC (rev 17605)
@@ -1,146 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [ ]>
-<chapter id="eclipse-debugging">
- <title>Debugging Tests in Eclipse</title>
- <para>
- This chapter explains how to debug standalone and integration tests from
- the TCK test suite in Eclipse. You should be able to use the lessons
- learned here to debug tests in an alternate IDE as well.
- </para>
- <section>
- <title>Debugging a standalone test</title>
- <para>
- There is almost no difference in how you debug a standalone test
- from how you run it. With the test class open in the Eclipse editor,
- simply right click in the editor view and select Debug As > TestNG
- Test. Eclipse will stop at any breakpoints you set just like it would
- with any other local debug process.
- </para>
- <para>
- If you plan to step into a class in a Web Beans implementation (or any
- other dependent library), you must ensure that the source is properly
- associated with the library. Below are the steps to follow to associate
- the source of Web Beans with the TestNG debug configuration:
- </para>
- <orderedlist>
- <listitem>
- <para>
- Select the Run > Debug Configurations... menu from the main
- menubar
- </para>
- </listitem>
- <listitem>
- <para>
- Select the name of the test class in the TestNG category
- </para>
- </listitem>
- <listitem>
- <para>
- Select the Source tab
- </para>
- </listitem>
- <listitem>
- <para>
- Click the Add... button on the right
- </para>
- </listitem>
- <listitem>
- <para>
- Select Java Project
- </para>
- </listitem>
- <listitem>
- <para>
- Check the project the contains the class you want to debug
- (e.g., webbeans-core)
- </para>
- </listitem>
- <listitem>
- <para>
- Click OK on the Project Selection window
- </para>
- </listitem>
- <listitem>
- <para>
- Click Close on the Debug Configurations window
- </para>
- </listitem>
- </orderedlist>
- <para>
- You'll have to complete those steps for any test class you are
- debugging, though you only have to do it once (the debug configuration
- hangs around indefinitely).
- </para>
- <para>
- Again, running a test in standalone isn't enough to pass the TCK and
- cannot be used to run or debug an integration test. Let's look at how
- to debug a test running in the context of the container.
- </para>
- </section>
- <section>
- <title>Debugging an integration test</title>
- <para>
- In order to debug an integration test, or any test run using in-container
- mode, the test must be configured to run in-container, as described in
- <xref linkend="eclipse-in-container" />,
- and you must attach the IDE debugger to the container. That puts the
- debugger on both sides of the fence, so to speak.
- </para>
- <para>
- Since setting up a test to run in-container has already been
- covered, we'll look at how to attach the IDE debugger to the container,
- and then move on launching the test in debug mode.
- </para>
- <section>
- <title>Attaching the IDE debugger to the container</title>
- <para>
- There are two ways to attach the IDE debugger to the container.
- You can either start the container in debug mode from within the
- IDE, or you can attach the debugger over a socket connection to a
- standalone container running with JPDA enabled.
- </para>
- <para>
- The Eclipse Server Tools, a subproject of the Eclipse Web Tools
- Project (WTP), has support for launching most major application
- servers, including JBoss AS 5. However, if you are using JBoss AS,
- you should consider using JBoss Tools instead, which offers tighter
- integration with JBoss technologies. See either the
- <ulink url="http://www.eclipse.org/webtools/server/server.php">Server Tools documentation</ulink>
- or the
- <ulink url="http://docs.jboss.org/tools/3.0.1.GA/en/as/html/index.html">JBoss Tools documentation</ulink>
- for how to setup a container and start it in debug mode.
- </para>
- <para>
- See
- <ulink
- url="http://maverikpro.wordpress.com/2007/11/26/remote-debug-a-web-application-using-eclipse">this blog entry</ulink>
- to learn how to start JBoss AS with JPDA enabled and how to get the
- Eclipse debugger to connect to the remote process.
- </para>
- </section>
- <section>
- <title>Launching the test in the debugger</title>
- <para>
- Once Eclipse is debugging the container, you can set a breakpoint in
- the test and debug it just like a standalone test. Let's give it a
- try.
- </para>
- <para>
- Open a test annotated with <literal>@IntegrationTest</literal> in
- the Eclipse editor, right click in the editor view, and select Debug
- As > TestNG Test. This time when the IDE hits the breakpoint, it
- halts the JVM thread of the container rather than the thread that
- launched the test.
- </para>
- <para>
- Remember that if you need to debug into dependent libraries, the
- source code for those libraries will need to be registered with the
- TestNG debug configuration as described in the first section in this
- chapter.
- </para>
- </section>
- </section>
-<!--
-vim: ts=3:sw=3:tw=80:set expandtab
--->
-</chapter>
Deleted: beanvalidation/tck/trunk/src/main/docbook/en-US/eclipse-running.xml
===================================================================
--- beanvalidation/tck/trunk/src/main/docbook/en-US/eclipse-running.xml 2009-10-01 08:14:40 UTC (rev 17604)
+++ beanvalidation/tck/trunk/src/main/docbook/en-US/eclipse-running.xml 2009-10-01 12:25:36 UTC (rev 17605)
@@ -1,447 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [ ]>
-<chapter id="eclipse-running">
- <title>Running Tests in Eclipse</title>
- <para>
- This chapter explains how to run individual tests using the Eclipse
- TestNG plugin. It covers running non-integration tests in standalone mode
- and integration tests (as well as non-integration tests) in in-container
- mode. You should be able to use the lessons learned here to debug tests in
- an alternate IDE as well.
- </para>
- <section>
- <title>Leveraging Eclipse's plugin ecosystem</title>
- <para>
- Using an existing test harness (TestNG) allows the tests to be executed
- and debugged in an Integrated Development Environment (IDE) using
- available plugins. Using an IDE is also the easiest way to execute a
- test class in isolation.
-
- </para>
- <para>
- The TCK can be executed in any IDE for which there is a TestNG plugin
- available. Running a test from the CDI TCK test suite using the Eclipse
- TestNG plugin is almost as simple as running any other TestNG test. You
- can also use the plugin to debug a test, which is described in the next
- chapter.
- </para>
- <para>
- Before running a test from the TCK test suite in Eclipse, you must have
- the Eclipse <ulink url="http://testng.org">TestNG plugin</ulink> and
- either the m2eclipse plugin or an Eclipse project generated use the
- Maven 2 Eclipse plugin (<literal>maven-eclipse-plugin</literal>). Refer
- to <xref linkend="eclipse-plugins" /> for more information on these
- plugins.
- </para>
-
- <para>
- With the m2eclipse plugin installed, Eclipse should recognize the
- CDI TCK projects as valid Eclipse projects (or any Web Beans project
- for that matter). Import them into the Eclipse workspace at this time.
- You should also import the Web Beans projects if you want to debug into
- that code, which is covered later.
- </para>
- <tip>
- <para>
- If you choose to use the Maven 2 Eclipse plugin
- (<literal>maven-eclipse-plugin</literal>), you should execute the
- plugin in both the tck and webbeans projects:
- </para>
- <programlisting><![CDATA[cd tck
-mvn clean eclipse:clean eclipse:eclipse -DdownloadSources -DdownloadJavadocs
-cd ../webbeans
-mvn clean eclipse:clean eclipse:eclipse -DdownloadSources -DdownloadJavadocs]]></programlisting>
- </tip>
- </section>
- <section>
- <title>Readying the Eclipse workspace</title>
- <para>
- When setting up your Ecilpse workspace, we recommended creating three
- workings sets:
- </para>
- <orderedlist>
- <listitem>
- <para>
- <emphasis role="bold">Web Beans</emphasis> - Groups the CDI API
- and the CDI RI (i.e., Web Beans) projects
- </para>
- </listitem>
- <listitem>
- <para>
- <emphasis role="bold">CDI TCK</emphasis> - Groups the CDI TCK
- API and the test suite projects
- </para>
- </listitem>
- <listitem>
- <para>
- <emphasis role="bold">Web Beans JBoss TCK Runner</emphasis> -
- Groups the porting package implementation and TCK runner projects
- that are configured to certify Web Beans deployed on JBoss AS 5.1
- </para>
- </listitem>
- </orderedlist>
- <para>
- The dependencies between the projects will either be established
- automatically by the m2eclipse plugin, based on the dependency
- information in the pom.xml files, or as generated by the <literal>mvn
- eclipse:eclipse</literal> command.
- </para>
- <para>
- Your workspace should appear as follows:
- </para>
- <programlisting><![CDATA[Web Beans
- jsr299-api
- webbeans-api
- webbeans-core
- webbeans-core-test
- webbeans-logging
- webbeans-parent
- webbeans-spi
- webbeans-version-matrix
-CDI TCK
- jsr299-tck-api
- jsr299-tck-impl
- jsr299-tck-parent
-Web Beans JBoss TCK Runner
- webbeans-jboss-tck-runner
- webbeans-porting-package]]></programlisting>
- <para>
- The tests in the TCK test suite are located in the jsr299-tck-impl
- project. You'll be working within this project in Eclipse when you are
- developing tests. However, as you learned earlier, there are no references
- to a CDI implementation in the TCK. So how can you execute an
- individual test in Eclipse? The secret is that you need to establish a
- link in Eclipse (not in Maven) between the jsr299-tck-impl project and
- your TCK runner project, which in this case is
- webbeans-jboss-tck-runner (the project in the jboss-tck-runner
- directory).
- </para>
- <para>
- Here are the steps to establish the link:
- </para>
- <orderedlist>
- <listitem>
- <para>
- Right click on the jsr299-tck-impl project
- </para>
- </listitem>
- <listitem>
- <para>
- Select Build Path > Configure Build Path...
- </para>
- </listitem>
- <listitem>
- <para>
- Click on the Projects tab
- </para>
- </listitem>
- <listitem>
- <para>
- Click the Add... button on the right
- </para>
- </listitem>
- <listitem>
- <para>
- Check the TCK runner project (e.g., webbeans-jboss-tck-runner)
- </para>
- </listitem>
- <listitem>
- <para>
- Click the OK button on the Required Project Selection dialog
- window
- </para>
- </listitem>
- <listitem>
- <para>
- Click the OK button on the Java Build Path window
- </para>
- </listitem>
- </orderedlist>
- <para>
- Of course, the webbeans-jboss-tck-runner also depends on the
- jsr299-tck-impl at runtime (so it can actually find the tests to
- execute). But Eclipse doesn't distinguish between build-time and
- runtime dependencies. As a result, we've created a circular dependency
- between the projects. In all likelihood, Eclipse will struggle (if not
- fail) to compile one or more projects. How can we break this cycle?
- </para>
- <para>
- As it turns out, the TCK runner doesn't need to access the tests to
- build. It only needs its classes, configurations and other dependenices
- at runtime (when the TestNG plugin executes). Therefore, we can remove
- the TCK runner's dependence on the jsr299-tck-impl project by following
- these steps:
- </para>
- <orderedlist>
- <listitem>
- <para>
- Right click on the webbeans-jboss-tck-runner project
- </para>
- </listitem>
- <listitem>
- <para>
- Select Build Path > Configure Build Path...
- </para>
- </listitem>
- <listitem>
- <para>
- Click on the Projects tab
- </para>
- </listitem>
- <listitem>
- <para>
- Select the TCK tests project (jsr299-tck-impl)
- </para>
- </listitem>
- <listitem>
- <para>
- Click the Remove button on the right
- </para>
- </listitem>
- <listitem>
- <para>
- Click the OK button on the Java Build Path window
- </para>
- </listitem>
- </orderedlist>
- <para>
- You are now ready to execute an individual test class (or artifact).
- Let's start with a test artifact capable of running in standalone mode.
- </para>
- </section>
- <section id="eclipse-standalone">
- <title>Running a test in standalone mode</title>
- <para>
- A standalone test artifact is a class which extends
- <literal>AbstractJSR299Test</literal>, is annotated with
- <literal>@Artifact</literal>, but is <emphasis
- role="italic">not</emphasis> annotated with
- <literal>@IntegrationTest</literal>. Select a standalone test artifact
- and open it in the Eclipse editor. Now right click in the editor view
- and select Run As > TestNG Test. The TestNG view should pop out and
- you should see all the tests in that artifact pass (if all goes well).
- </para>
- <note>
- <para>
- If the TCK complains that there is a property missing, close all
- the projects, open them again, and rebuild. The m2eclipse plugin can
- be finicky getting everything built correctly the first time.
- </para>
- </note>
- <para>
- So far you have executed a test in standalone mode. That's not
- sufficient to pass the TCK. The test must be executed using
- in-container mode. Using in-container mode is also the only way to
- execute a test annotated with <literal>@IntegrationTest</literal>
- (that's what the annotation means) as it requires container resources.
- </para>
- <para>
- Let's see what has to be done to execute an integration test. This
- will result in the artifact being deployed to the container, which is
- JBoss AS 5.1 if you are using the JBoss TCK runner.
- </para>
- </section>
- <section id="eclipse-in-container">
- <title>Running integration tests</title>
- <para>
- As you have learned, the JBoss test harness determines how to behave
- based on the values of numerous system properties or properties defined
- in META-INF/jboss-test-harness.properties classpath resources. If the
- property named
- <literal>org.jboss.testharness.standalone</literal>
- is not defined, the harness assumes that the test is to be run in
- standalone mode. In order to run the tests in the container, you need
- to add a properties file to the classpath that sets the standalone
- property to false and provides values for other properties required to
- run an in-container test.
- </para>
- <para>
- The JBoss TCK runner project conveniently provides the properties file
- src/test/debug-resources/META-INF/jboss-test-harness.properties that
- contains all of the necessary properties for in-container testing in
- Eclipse. Assuming you followed the directory structure recommended in
- <xref linkend="tck-environment"/>, you are good to go. Otherwise, you
- may have to tune the
- <literal>org.jboss.testharness.container.extraConfigurationDir</literal> and
- <literal>org.jboss.testharness.libraryDirectory</literal> properties to
- point to the relative location of the related projects. The properties
- should be defined as follows:
- </para>
- <itemizedlist>
- <listitem>
- <para>
- <literal>org.jboss.testharness.container.extraConfigurationDir
- </literal>
- - the relative path from the jboss-tck-impl project to a
- directory that contains a build.properties or
- local.build.properties file defining the location of a JBoss AS
- 5.1 installation in the
- <literal>jboss.home</literal>
- property
- </para>
- </listitem>
- <listitem>
- <para>
- <literal>org.jboss.testharness.libraryDirectory</literal>
- - the relative path from the jboss-tck-impl project to the
- target/dependency/lib directory in the TCK runner project.
- </para>
- </listitem>
- </itemizedlist>
- <para>
- The other properties in that file are defined as follows:
- </para>
- <programlisting>org.jboss.testharness.standalone=false
-orjboss.testharness.container.forceRestart=false
-orjboss.testharness.runIntegrationTests=true</programlisting>
- <para>
- You're now ready to execute an integration test. Select an integration
- test (a class that extends <literal>AbstractJSR299Test</literal> and is
- annotated with both <literal>@Artifact</literal> and
- <literal>@IntegrationTest</literal>) and open it in your Eclipse
- editor. Follow these steps to execute the class with the TestNG plugin:
- </para>
- <orderedlist>
- <listitem>
- <para>
- Right click in the editor view and select Run As > TestNG Test
- </para>
- </listitem>
- <listitem>
- <para>
- Observe the test fail because of missing dependencies
- </para>
- </listitem>
- <listitem>
- <para>
- Select the Run > Run Configurations... menu from the main
- menubar
- </para>
- </listitem>
- <listitem>
- <para>
- Select the name of the test class under the TestNG category
- </para>
- </listitem>
- <listitem>
- <para>
- Select the Classpath tab
- </para>
- </listitem>
- <listitem>
- <para>
- Select User Entries in the tree
- </para>
- </listitem>
- <listitem>
- <para>
- Click the Advanced... button on the right
- </para>
- </listitem>
- <listitem>
- <para>
- Select Add Folders and click the OK button
- </para>
- </listitem>
- <listitem>
- <para>
- Select the webbeans-jboss-tck-runner/src/test/debug-resources
- folder
- </para>
- </listitem>
- <listitem>
- <para>
- Click the OK button on the Folder Selection dialog window
- </para>
- </listitem>
- <listitem>
- <para>
- Click on the webbeans-jboss-tck-runner entry
- </para>
- </listitem>
- <listitem>
- <para>
- Move the webbeans-jboss-tck-runner to the first entry using
- the Up button
- </para>
- </listitem>
- <listitem>
- <para>
- Click the Run button on the Run Configurations dialog window
- </para>
- </listitem>
- </orderedlist>
- <para>
- When you run the test this time, it should pass. If you get a
- failure that the container (e.g., JBoss AS 5.1) must be run with
- assertions enabled, you need to stop the container and start it with
- the -ea flag (or just leave it stopped and the test will start it
- appropriately).
- </para>
- <para>
- You can simply right click and select Run As > TestNG Test for
- all subsequent runs for the reason cited earlier, the run configuration
- for a class is retained indefinitely.
- </para>
- <para>
- Alternatively, you can configure TestNG to execute all tests
- in-container by default by adding the properties file in the
- debug-resources folder to the project's classpath as follows:
- </para>
- <orderedlist>
- <listitem>
- <para>
- Right click on the jsr299-tck-impl project
- </para>
- </listitem>
- <listitem>
- <para>
- Select Build Path > Configure Build Path...
- </para>
- </listitem>
- <listitem>
- <para>
- Click on the Libraries tab
- </para>
- </listitem>
- <listitem>
- <para>
- Click the Add Class Folder... button on the right
- </para>
- </listitem>
- <listitem>
- <para>
- Check the webbeans-jboss-tck-runner/src/test/debug-resources
- folder
- </para>
- </listitem>
- <listitem>
- <para>
- Click the OK button on the Class Folder Selection dialog
- window
- </para>
- </listitem>
- <listitem>
- <para>
- Click the OK button on the Java Build Path window
- </para>
- </listitem>
- </orderedlist>
- <para>
- Now you don't have to do any special configuration per test class.
- </para>
- <para>
- You can stop the individual tests from running in-container by
- reversing the steps above to remove the debug-resources folder from the
- Eclipse classpath.
- </para>
- <para>
- You have now mastered running the CDI TCK against Web Beans using
- both Maven 2 and within Eclipse. Now you're likely interested in how to
- debug a test so that you can efficiently investigate test failures.
- </para>
- </section>
-<!--
-vim: ts=3:sw=3:tw=80:set expandtab
--->
-</chapter>
Modified: beanvalidation/tck/trunk/src/main/docbook/en-US/executing.xml
===================================================================
--- beanvalidation/tck/trunk/src/main/docbook/en-US/executing.xml 2009-10-01 08:14:40 UTC (rev 17604)
+++ beanvalidation/tck/trunk/src/main/docbook/en-US/executing.xml 2009-10-01 12:25:36 UTC (rev 17605)
@@ -16,25 +16,26 @@
<para>The test suite is executed by the Maven 2 TestNG plugin during the
test phase of the Maven 2 life cycle. The execution happens within a TCK
runner project (as opposed to the TCK project itself). Hibernate Validator
- includes a TCK runner project that executes the Bean Validation TCK on
- Hibernate Validator running inside JBoss AS 5.1. To execute the Bean
- Validation TCK on your own Bean Validation implementation, you could
- modify the TCK runner project included with Hibernate Validator to use
- your Bean Validation implementation as described in <xref
- linkend="configuration" />.</para>
+ includes a TCK runner project (hibernate-validator-tck-runner) that
+ executes the Bean Validation TCK on Hibernate Validator running inside
+ JBoss AS 5.1. To execute the Bean Validation TCK on your own Bean
+ Validation implementation, you could modify the TCK runner project
+ included with Hibernate Validator to use your Bean Validation
+ implementation as described in <xref linkend="configuration" />.</para>
</section>
<section>
<title>Running the Tests In Standalone Mode</title>
- <para>To execute the TCK test suite against Web Beans, first switch to the
- jboss-tck-runner directory in the extracted Web Beans distribution:</para>
+ <para>To execute the TCK test suite against Bean Validation, first switch
+ to the <filename>hibernate-validator-tck-runner </filename>directory in
+ the checked out Hibernate Validator distribution:</para>
<programlisting>cd ri/hibernate-validator-tck-runner</programlisting>
<note>
- <para>These instructions assume you have extracted the CDI-related
- software according to the recommendation given in <xref
+ <para>These instructions assume you have extracted the Bean Validation
+ related software according to the recommendation given in <xref
linkend="tck-environment" />.</para>
</note>
Modified: beanvalidation/tck/trunk/src/main/docbook/en-US/installation.xml
===================================================================
--- beanvalidation/tck/trunk/src/main/docbook/en-US/installation.xml 2009-10-01 08:14:40 UTC (rev 17604)
+++ beanvalidation/tck/trunk/src/main/docbook/en-US/installation.xml 2009-10-01 12:25:36 UTC (rev 17605)
@@ -12,13 +12,12 @@
<title>Obtaining the Software</title>
<para>You can obtain a release of the Bean Validation TCK project from the
- from the <ulink url="http://seamframework.org/Download">download
+ from the <ulink url="https://www.hibernate.org/6.html">download
page</ulink> on the Hibernate Validator website. The Bean Validation TCK
is distributed as a ZIP file, which contains the TCK artifacts (the test
- suite binary and source, porting package API binary and source, the test
- suite descriptor, the audit source and report) in <code>/artifacts</code>,
- the TCK library dependencies in <code>/lib</code> and documentation in
- <code>/lib</code>.</para>
+ suite binary and source, the test suite descriptor, the audit source and
+ report), the TCK library dependencies in <code>/lib</code> and
+ documentation in <code>/doc</code>.</para>
<para>You can also download the currnet source code from <ulink
url="http://anonsvn.jboss.org/repos/hibernate/beanvalidation/tck/trunk/">JBoss
@@ -45,10 +44,6 @@
yourself with the TCK before testing your own Bean Validation
implementation.</para>
</note>
-
- <para>Naturally, to execute Java programs, you must have a Java SE runtime
- environment. The TCK requires Java 5 or better, which you can obtain from
- the <ulink url="http://java.sun.com">Java Software</ulink> website.</para>
</section>
<section id="tck-environment">
@@ -72,10 +67,16 @@
<para>The rest of the TCK software can simply be extracted. It's
recommended that you create a folder named jsr303 to hold all of the
jsr303-related projects. Then, extract the TCK distribution into a
- subfolder named tck. If you have downloaded the Hibernate Validator
- distribution, extract it into a sibling folder named ri. The resulting
- folder structure is shown here:</para>
+ subfolder named tck. You can also check out the full Hibernate Validator
+ source into a subfolder ri. This will allow you to run the TCK against
+ Hibernate Validator.</para>
+ <programlisting>svn co http://anonsvn.jboss.org/repos/hibernate/validator/tags/v_4_0_0_GA ri</programlisting>
+
+ <para>If you have downloaded the Hibernate Validator distribution, extract
+ it into a sibling folder named hibernate-validator. The resulting folder
+ structure is shown here:</para>
+
<note>
<para>This layout is assumed through all descriptions in this reference
guide.</para>
@@ -96,15 +97,6 @@
<title>Running the TCK against the Bean Validation RI (Hibernate
Validator) and JBoss AS</title>
- <para>Web Beans is built as a modular library, and as such can be
- retro-fitted to Java EE 5 products as required. JBoss AS 5.0 and above
- releases bundle Web Beans. JBoss AS 5.0 also allows you to upgrade the
- Web Beans module to the current release (though some functionality may
- be disabled).</para>
-
- <para>To install JBoss AS 5.1 and update to the latest Web Beans
- release:</para>
-
<itemizedlist>
<listitem>
<para>First, you should download JBoss AS 5.1 from the JBoss AS
@@ -118,34 +110,18 @@
</listitem>
<listitem>
- <para>Change to the webbeans directory.</para>
+ <para>Change to the
+ <filename>ri/hibernate-validator-tck-runner</filename>
+ directory.</para>
</listitem>
<listitem>
<para>Make sure the <literal>jboss.home</literal> property in the
- local.build.properties file in the jboss-as directory references a
- JBoss AS 5.1 installation:</para>
-
- <programlisting>jboss.home=/path/to/jboss-as-5.1</programlisting>
+ <filename>pom.xml</filename> file references a JBoss AS 5.1
+ installation.</para>
</listitem>
<listitem>
- <para>Then, run Ant from the jboss-as directory to install the
- deployer:</para>
-
- <programlisting>ant update</programlisting>
-
- <para>The libraries needed by the deployer are fetched from the
- Maven 2 repository on demand.</para>
- </listitem>
- </itemizedlist>
-
- <para>Web Beans includes a TCK runner that executes the TCK using Web
- Beans as the CDI implementation and JBoss AS as the Java EE runtime. To
- run the tck:</para>
-
- <itemizedlist>
- <listitem>
<para>You need to install Maven. You can find documention on how to
install Maven 2 in the <ulink
url="http://www.sonatype.com/books/maven-book/reference/installation-sect-maven-install.html">Maven:
@@ -157,8 +133,7 @@
<listitem>
<para>Next, instruct Maven to run the TCK:</para>
- <programlisting>cd jboss-tck-runner
-mvn test -Dincontainer</programlisting>
+ <programlisting>mvn test -Dincontainer</programlisting>
</listitem>
<listitem>
@@ -170,58 +145,6 @@
</tip>
</section>
- <section id="eclipse-plugins">
- <title>Eclipse Plugins</title>
-
- <para>Eclipse, or any other IDE, is not required to execute or pass the
- TCK. However an implementor may wish to execute tests in an IDE to aid
- debugging the tests. This section introduces two essential Eclipse
- plugins, TestNG and Maven 2, and points you to resources explaining how to
- install them.</para>
-
- <section id="eclipse-testng-plugin">
- <title>TestNG Plugin</title>
-
- <para>The TCK is built on the JBoss Test Harness, which is in turn built
- on TestNG. Therefore, having the TestNG plugin installed in Eclipse is
- essential. Instructions for using the TestNG update site to add the
- TestNG plugin to Eclipse are provided on the TestNG <ulink
- url="http://testng.org/doc/download.html">download page</ulink>. You can
- find a tutorial that explains how to use the TestNG plugin on the TestNG
- <ulink url="http://testng.org/doc/eclipse.html">Eclipse
- page</ulink>.</para>
- </section>
-
- <section id="m2eclipse-plugin">
- <title>Maven 2 Plugin (m2eclipse)</title>
-
- <para>Another useful plugin is m2eclipse. Both the TCK project and Web
- Beans are use Maven 2. Therefore, to work with these projects in
- Eclipse, you may wish to have native support for Maven 2 projects, which
- the m2eclipse plugin provides. Instructions for using the m2eclipse
- update site to add the m2eclipse plugin to Eclipse are provided on the
- m2eclipse home page. For more, read the m2eclipse <ulink
- url="http://www.sonatype.com/books/m2eclipse-book/reference">reference
- guide</ulink>.</para>
-
- <para>m2eclipse is still a rather young project dealing with a complex
- domain and you may run into problems using it. If that is the case, you
- can alternatively use the Eclipse plugin for Maven 2 to generate native
- Eclipse projects from Maven 2 projects.</para>
-
- <para>If you have Maven 2 installed, you have everything you need. Just
- execute the following command from any Maven 2 project to produce the
- Eclipse project files.</para>
-
- <programlisting>mvn eclipse:eclipse</programlisting>
- </section>
-
- <para>Again, the Eclipse plugins are not required to execute the TCK, but
- can be very helpful when validating an implementation against the TCK test
- suite and especially when using the modules from the Hibernate Validator
- project.</para>
- </section>
-
<!--
vim: ts=3:sw=3:tw=80:set expandtab
-->
Modified: beanvalidation/tck/trunk/src/main/docbook/en-US/introduction.xml
===================================================================
--- beanvalidation/tck/trunk/src/main/docbook/en-US/introduction.xml 2009-10-01 08:14:40 UTC (rev 17604)
+++ beanvalidation/tck/trunk/src/main/docbook/en-US/introduction.xml 2009-10-01 12:25:36 UTC (rev 17605)
@@ -2,7 +2,7 @@
<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">
<chapter id="introduction">
- <title>Introduction (Bean Validation TCK)</title>
+ <title>Introduction</title>
<para>This chapter explains the purpose of a TCK and identifies the
foundation elements of the Bean Validation TCK.</para>
@@ -28,7 +28,7 @@
unmodified).</para>
<para>A TCK is entirely implementation agnostic. It should validate
- assertions by consulting the specficiation's public API. </para>
+ assertions by consulting the specficiation's public API.</para>
</section>
<section>
@@ -95,10 +95,10 @@
<para>The Bean Validation TCK is designed as a portable, configurable and
automated test suite for verifying the compatibility of an implementation
- of the JSR-303: Bean Validation specification. The test suite is built
- atop TestNG and provides a series of extensions that allow runtime
- packaging and deployment of JEE artifacts for in-container testing (JBoss
- Test Harness).</para>
+ of JSR-303: Bean Validation specification. The test suite is built atop
+ TestNG and provides a series of extensions that allow runtime packaging
+ and deployment of JEE artifacts for in-container testing (JBoss Test
+ Harness).</para>
<note>
<para>The Bean Validation TCK harness is based on the JBoss Test
@@ -107,7 +107,7 @@
<para>Each test class in the suite acts as a deployable unit. The
deployable units, or artifacts, are defined declaratively using
- annotations. The artifact produced can be either a WAR or an EAR.</para>
+ annotations. </para>
<para>The declarative approach allows many of the tests to be executed in
a standalone implementation of Bean Validation, accounting for a boast in
@@ -175,15 +175,15 @@
<listitem>
<para><emphasis role="bold">The test suite</emphasis>, which is a
collection of TestNG tests, the TestNG test suite descriptor and
- supplemental resources that configure CDI and other software
- components.</para>
+ supplemental resources that configure Bean Validation and other
+ software components.</para>
</listitem>
<listitem>
<para><emphasis role="bold">The TCK audit</emphasis> is used to list
- out the assertions identified in the CDI specification. It matches
- the assertions to testcases in the test suite by unique identifier
- and produces a coverage report.</para>
+ out the assertions identified in the Bean Validation specification.
+ It matches the assertions to testcases in the test suite by unique
+ identifier and produces a coverage report.</para>
<para>The audit document is provided along with the TCK. Each
assertion is defined with a reference to a chapter, section and
@@ -203,7 +203,7 @@
<itemizedlist>
<listitem>
- <para>JBoss AS 5.0.0.GA using Sun Java SE 6 on Red Hat Enterprise
+ <para>JBoss AS 5.1.0.GA using Sun Java SE 6 on Red Hat Enterprise
Linux 5.2</para>
</listitem>
</itemizedlist>
Modified: beanvalidation/tck/trunk/src/main/docbook/en-US/part-execution.xml
===================================================================
--- beanvalidation/tck/trunk/src/main/docbook/en-US/part-execution.xml 2009-10-01 08:14:40 UTC (rev 17604)
+++ beanvalidation/tck/trunk/src/main/docbook/en-US/part-execution.xml 2009-10-01 12:25:36 UTC (rev 17605)
@@ -9,19 +9,8 @@
Bean validation reference implementation (Hibernate Validator). First, you
are walked through the steps necessary to execute the test suite on
Hibernate Validator. Then you discover how to modify the TCK runner to
- execute the test suite on your own implementation. Finally, you learn how
- to debug tests from the test suite in Eclipse.</para>
+ execute the test suite on your own implementation. </para>
</partintro>
<xi:include href="executing.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
-
- <xi:include href="eclipse-running.xml"
- xmlns:xi="http://www.w3.org/2001/XInclude" />
-
- <xi:include href="eclipse-debugging.xml"
- xmlns:xi="http://www.w3.org/2001/XInclude" />
-
- <!--
-vim: ts=3:sw=3:tw=80:set expandtab
--->
</part>
Modified: beanvalidation/tck/trunk/src/main/docbook/en-US/part-test-harness.xml
===================================================================
--- beanvalidation/tck/trunk/src/main/docbook/en-US/part-test-harness.xml 2009-10-01 08:14:40 UTC (rev 17604)
+++ beanvalidation/tck/trunk/src/main/docbook/en-US/part-test-harness.xml 2009-10-01 12:25:36 UTC (rev 17605)
@@ -1,18 +1,24 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE part PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [ ]>
+<!DOCTYPE part PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
+"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">
<part id="test-harness">
- <title>JBoss Test Harness</title>
- <partintro>
- <para>
- In this part you learn about the JBoss Test Harness through selected
- chapters from the JBoss Test Harness Reference Guide. You can view the
- entire JBoss Test Harness Reference Guide at <ulink url="">TODO</ulink>.
- </para>
- </partintro>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="harness/introduction.xml" />
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="harness/configuration.xml" />
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="harness/executing.xml" />
-<!--
+ <title>JBoss Test Harness</title>
+
+ <partintro>
+ <para>In this part you learn about the JBoss Test Harness through selected
+ chapters from the JBoss Test Harness Reference Guide. </para>
+ </partintro>
+
+ <xi:include href="harness/introduction.xml"
+ xmlns:xi="http://www.w3.org/2001/XInclude" />
+
+ <xi:include href="harness/configuration.xml"
+ xmlns:xi="http://www.w3.org/2001/XInclude" />
+
+ <xi:include href="harness/executing.xml"
+ xmlns:xi="http://www.w3.org/2001/XInclude" />
+
+ <!--
vim: ts=3:sw=3:tw=80:set expandtab
-->
</part>
Modified: beanvalidation/tck/trunk/src/main/docbook/en-US/reporting.xml
===================================================================
--- beanvalidation/tck/trunk/src/main/docbook/en-US/reporting.xml 2009-10-01 08:14:40 UTC (rev 17604)
+++ beanvalidation/tck/trunk/src/main/docbook/en-US/reporting.xml 2009-10-01 12:25:36 UTC (rev 17605)
@@ -20,8 +20,8 @@
<para><emphasis role="bold">Assertion Breadth
Coverage</emphasis></para>
- <para>The CDI TCK provides at least 75% coverage of identified
- assertions with test cases.</para>
+ <para>The BEan Validation TCK provides at least 100% coverage of
+ identified assertions with test cases.</para>
</listitem>
<listitem>
@@ -50,8 +50,8 @@
<listitem>
<para><emphasis role="bold">API Signature Coverage</emphasis></para>
- <para>The CDI TCK covers 100% of all API public methods using the Java
- CTT Sig Test tool.</para>
+ <para>The Bean Validation TCK covers 100% of all API public methods
+ using the Java CTT Sig Test tool.</para>
</listitem>
</itemizedlist>
</section>
@@ -77,11 +77,11 @@
2.1:</para>
<blockquote>
- Every constraint annotation must define a message element of type String
+ Every constraint annotation must define a message element of type String
</blockquote>
<para>The assertions are listed in the XML file
- src/main/resources/tck-audit.xml in the Bean Validation TCK
+ <filename>tck-audit.xml</filename> in the Bean Validation TCK
distribution. Each assertion is identified by the section of the
specification document in which it resides and assigned a unique
paragraph identifier to narrow down the location of the assertion
@@ -130,8 +130,9 @@
project build. Specifically, it is generated by an annotation processor
that attaches to the compilation of the classes in the TCK test suite,
another tool from the JBoss Test Utils project. You can enable this
- report by setting the commandline property tck-audit to true when
- running the Maven 2 build in the tck directory.</para>
+ report by setting the commandline property
+ <property>tck-audit</property> to true when running the Maven 2 build in
+ the tck directory.</para>
<programlisting>mvn clean install -Dtck-audit=true</programlisting>
@@ -215,19 +216,20 @@
<section>
<title>TestNG Reports</title>
- <para>As you by now, the CDI TCK test suite is really just a TestNG test
- suite. That means an execution of the CDI TCK test suite produces all
- the same reports that TestNG produces. This section will go over those
- reports and show you were to go to find each of them.</para>
+ <para>As you by now, the Bean Validation TCK test suite is really just a
+ TestNG test suite. That means an execution of the Bean Validation TCK
+ test suite produces all the same reports that TestNG produces. This
+ section will go over those reports and show you were to go to find each
+ of them.</para>
<section>
<title>Maven 2, Surefire and TestNG</title>
- <para>When the CDI TCK test suite is executed during the Maven 2 test
- phase of the TCK runner project, TestNG is invoked indirectly through
- the Maven Surefire plugin. Surefire is a test execution abstraction
- layer capable of executing a mix of tests written for JUnit, TestNG,
- and other supported test frameworks.</para>
+ <para>When the Bean Validation TCK test suite is executed during the
+ Maven 2 test phase of the TCK runner project, TestNG is invoked
+ indirectly through the Maven Surefire plugin. Surefire is a test
+ execution abstraction layer capable of executing a mix of tests
+ written for JUnit, TestNG, and other supported test frameworks.</para>
<para>Why is this relevant? It means two things. First, it means that
you are going to get a summary of the test run on the commandline.
@@ -248,7 +250,7 @@
<note>
<para>The number of tests executed, the execution time, and the
output will differ when you run the tests using in-container mode as
- the CDI TCK requires.</para>
+ the Bean Validation TCK requires.</para>
</note>
<para>If the Maven reporting plugin that compliments Surefire is
@@ -295,33 +297,20 @@
</listitem>
</itemizedlist>
- <para>The first report, the test summary report, show below, is
- written to the file index.html. It produces the same information as
- the generic Surefire report.</para>
-
- <graphic align="center" fileref="images/testng-summary-report.png" />
-
- <para>The summary report links to the test suite detail report, which
+ <para>The first report, the test summary report is written to the file
+ index.html. It produces the same information as the generic Surefire
+ report.The summary report links to the test suite detail report, which
has a wealth of information. It shows a complete list of test groups
along with the classes in each group, which groups were included and
excluded, and any exceptions that were raised, whether from a passed
or failed test. A partial view of the test suite detail report is
shown below.</para>
- <graphic align="center"
- fileref="images/testng-suite-detail-report.png" />
-
<para>The test suite detail report is very useful, but it borderlines
on complex. As an alternative, you can have a look at the emailable
report, which is a single HTML document that shows much of the same
information as the test suite detail report in a more compact layout.
- A partial view of the emailable report is shown below.</para>
-
- <graphic align="center" fileref="images/testng-emailable-report.png" />
-
- <para>Now that you have seen two ways to get test results from the
- Maven test execution, let's switch over to the IDE, specifically
- Eclipse, and see how it presents TestNG test results.</para>
+ </para>
</section>
</section>
</section>
More information about the hibernate-commits
mailing list