[infinispan-issues] [JBoss JIRA] (ISPN-8677) Remove dataservices dependency on SSO image

[Ryan Emerson (JIRA)]

Ryan Emerson created ISPN-8677:
----------------------------------

             Summary: Remove dataservices dependency on SSO image
                 Key: ISPN-8677
                 URL: https://issues.jboss.org/browse/ISPN-8677
             Project: Infinispan
          Issue Type: Enhancement
          Components: Cloud
            Reporter: Ryan Emerson
            Assignee: Ryan Emerson


Currently we utilise the sso71-openshift image to initiate trust and keystores in the dataservice images, however all that is really required from this image is the openssl package. Therefore, we should remove the sso71-openshift dependency and install openssl via concreate package repositories. 

I have already utilised concreate packages locally with success, however it does not work on the CI nodes due to how docker build is attempting to install openssl from the remote repo. The following error occurs when executing the build on CI:

{code}
Step 7 : RUN yum install -y --disablerepo=\* --enablerepo=jboss-rhel-os openssl     && yum clean all &&     rpm -q  openssl
 ---> Running in 085b9e044e8f
Loaded plugins: ovl, product-id, search-disabled-repos, subscription-manager
This system is not registered with an entitlement server. You can use subscription-manager to register.
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.


 One of the configured repositories failed (Red Hat RHEL7 repo),
 and yum doesn't have enough cached data to continue. At this point the only
 safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Run the command with the repository temporarily disabled
            yum --disablerepo=jboss-rhel-os ...

     4. Disable the repository permanently, so yum won't use it by default. Yum
        will then just ignore the repository until you permanently enable it
        again or use --enablerepo for temporary usage:

            yum-config-manager --disable jboss-rhel-os
        or
            subscription-manager repos --disable=jboss-rhel-os

     5. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=jboss-rhel-os.skip_if_unavailable=true

failure: repodata/repomd.xml from jboss-rhel-os: [Errno 256] No more mirrors to try.
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: [Errno 12] Timeout on http://pulp.dist.prod.ext.phx2.redhat.com/content/dist/rhel/server/7/7Server/x86_64/os/repodata/repomd.xml: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Removing intermediate container 085b9e044e8f
The command '/bin/sh -c yum install -y --disablerepo=\* --enablerepo=jboss-rhel-os openssl     && yum clean all &&     rpm -q  openssl' returned a non-zero code: 1
make: *** [build-image] Error 1
{code}



--
This message was sent by Atlassian JIRA
(v7.5.0#75005)