[jboss-dev-forums] [JBoss AS7 Development] - Multiple instances of JBoss AS7 on the same machine

[jaikiran pai]

jaikiran pai [http://community.jboss.org/people/jaikiran] created the document:

"Multiple instances of JBoss AS7 on the same machine"

To view the document, visit: http://community.jboss.org/docs/DOC-16705

--------------------------------------------------------------
h4. Overview:

This wiki explains how multiple instances of JBoss AS7 +standalone+ server, on single physical system, can be started simultaneously.

h4. Approach#1

[Tested against JBoss AS7.0.0 Beta2 and AS7 upstream dated April 8 2011]

In this approach we will create multiple copies of JBoss AS7 on a single system.

* Download JBoss AS7. And unzip it to some location. Let's call this instance <jboss-as-7-one>
* As a sanity test, just start this server once, by running the following script from the <jboss-as-7-one>/bin folder:

jpai at jpai-laptop:bin$ ./standalone.sh

* Make sure the server starts without any errors. Once it has started, shutdown the server by using Ctrl + C
* Let's now copy the entire <jboss-as-7-one> instance to <jboss-as-7-two>. We now have 2 copies of JBoss AS7 on our system.
* Our next step is to configure the second instance to use a different IP address to bind the services to. By default, <jboss-as-7-one> instance uses 127.0.0.1 as the IP address to bind the  services to. This in configured in JBOSS_HOME/standalone/configuration/standalone.xml file (only relevant sections pasted below):

...
    <management-interfaces>
        <native-interface interface="default" port="9999"/>
        <http-interface interface="default" port="9990"/>
    </management-interfaces>
...

<interfaces>
        <interface name="default">
            <inet-address value="127.0.0.1"/>
        </interface>
        <interface name="any">
            <any-address/>
        </interface>
        <interface name="complex">
            <any>
                <subnet-match value="192.168.0.0/16"/>
                <public-address/>
            </any>
            <not>
                <site-local-address/>
            </not>
            <up/>
            <multicast/>
        </interface>
    </interfaces>
    <socket-binding-group name="standard-sockets" default-interface="default">
        <socket-binding name="jndi" port="1099"/>
        <socket-binding name="jmx-connector-registry" port="1090"/>
        <socket-binding name="jmx-connector-server" port="1091"/>
        <socket-binding name="http" port="8080"/>
        <socket-binding name="https" port="8447"/>
        <socket-binding name="osgi-http" port="8090"/>
        <socket-binding name="remoting" port="4447"/>
        <socket-binding name="txn-recovery-environment" port="4712"/>
        <socket-binding name="txn-status-manager" port="4713"/>
        <socket-binding name="txn-socket-process-id" port="4714"/>
        <socket-binding name="messaging" port="5445"/>
        <socket-binding name="messaging-throughput" port="5455"/>
    </socket-binding-group>


As can be seen, the management interface and the socket bindings, all use the interface named "default", which binds to 127.0.0.1. 

* Now for <jboss-as-7-two> let's configure this file to use a different interface. 
* Open the <jboss-as-7-two>/standalone/configuration/standalone.xml in a text editor and a custom interface to the <interfaces> section. In this example, we'll name the new interface "specific-ip-interface" and let it bind to a specific IP XXX.YYY.AAA.BBB (should be a valid IP address). So here's the new interface definition:
<interfaces>
        <interface name="default">
            <inet-address value="127.0.0.1"/>
        </interface>
        <!-- New interface for our second instance -->
        <interface name="specific-ip-interface">
            <inet-address value="XXX.YYY.AAA.BBB"/>
        </interface>
        <interface name="any">
            <any-address/>
        </interface>
        <interface name="complex">
            <any>
                <subnet-match value="192.168.0.0/16"/>
                <public-address/>
            </any>
            <not>
                <site-local-address/>
            </not>
            <up/>
            <multicast/>
        </interface>
    </interfaces>


* Our next step is to let the socket bindings and the management interface, use this new interface instead of the default one.
* So continue editing the  <jboss-as-7-two>/standalone/configuration/standalone.xml and point the management interface and socket bindings to use this new interface as follows:
...

    <management-interfaces>
        <native-interface interface="specific-ip-interface" port="9999"/>
        <http-interface interface="specific-ip-interface" port="9990"/>
    </management-interfaces>
...

    <interfaces>
        <interface name="default">
            <inet-address value="127.0.0.1"/>
        </interface>
        <!-- New interface for our second instance -->
        <interface name="specific-ip-interface">
            <inet-address value="XXX.YYY.AAA.BBB"/>
        </interface>
        <interface name="any">
            <any-address/>
        </interface>
        <interface name="complex">
            <any>
                <subnet-match value="192.168.0.0/16"/>
                <public-address/>
            </any>
            <not>
                <site-local-address/>
            </not>
            <up/>
            <multicast/>
        </interface>
    </interfaces>
    <socket-binding-group name="standard-sockets" default-interface="specific-ip-interface">
        <socket-binding name="jndi" port="1099"/>
        <socket-binding name="jmx-connector-registry" port="1090"/>
        <socket-binding name="jmx-connector-server" port="1091"/>
        <socket-binding name="http" port="8080"/>
        <socket-binding name="https" port="8447"/>
        <socket-binding name="osgi-http" port="8090"/>
        <socket-binding name="remoting" port="4447"/>
        <socket-binding name="txn-recovery-environment" port="4712"/>
        <socket-binding name="txn-status-manager" port="4713"/>
        <socket-binding name="txn-socket-process-id" port="4714"/>
        <socket-binding name="messaging" port="5445"/>
        <socket-binding name="messaging-throughput" port="5455"/>
    </socket-binding-group>


* Save the changes. That's it for configurations. Now let's start these individual instances.
* From the command prompt, go to <jboss-as-7-one>/bin and run the following command:
jpai at jpai-laptop:jboss-as-7-one/bin$ ./standalone.sh

* Run the same command from <jboss-as-7-two>/bin:
jpai at jpai-laptop:jboss-as-7-two/bin$ ./standalone.sh

You'll now have 2 different instances of JBoss AS7 running on the same physical system.

h4. Approach#2(?)
--------------------------------------------------------------

Comment by going to Community
[http://community.jboss.org/docs/DOC-16705]

Create a new document in JBoss AS7 Development at Community
[http://community.jboss.org/choose-container!input.jspa?contentType=102&containerType=14&container=2225]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.jboss.org/pipermail/jboss-dev-forums/attachments/20110408/5e270f58/attachment.html