[jboss-svn-commits] JBL Code SVN: r37316 - in labs/jbosstm/trunk: ArjunaCore/docs/development_guide and 48 other directories.
jboss-svn-commits at lists.jboss.org
jboss-svn-commits at lists.jboss.org
Thu Jul 28 09:02:51 EDT 2011
Author: tomjenkinson
Date: 2011-07-28 09:02:50 -0400 (Thu, 28 Jul 2011)
New Revision: 37316
Added:
labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/fallback_content/
labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/fallback_content/Legal_Notice.xml
labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/fallback_content/
labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/fallback_content/Legal_Notice.xml
labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/fallback_content/
labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/fallback_content/Legal_Notice.xml
labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/fallback_content/
labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/fallback_content/Legal_Notice.xml
labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/fallback_content/
labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/fallback_content/Legal_Notice.xml
labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/fallback_content/
labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/fallback_content/Legal_Notice.xml
labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/fallback_content/
labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/fallback_content/Legal_Notice.xml
labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/fallback_content/
labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/fallback_content/Legal_Notice.xml
labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/fallback_content/
labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/fallback_content/Legal_Notice.xml
labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/fallback_content/
labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/fallback_content/Legal_Notice.xml
labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/fallback_content/
labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/fallback_content/Legal_Notice.xml
labs/jbosstm/trunk/docs/development_guide/en-US/fallback_content/
labs/jbosstm/trunk/docs/development_guide/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/docs/development_guide/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/docs/development_guide/en-US/fallback_content/Legal_Notice.xml
labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/fallback_content/
labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/fallback_content/Legal_Notice.xml
labs/jbosstm/trunk/docs/release_notes/en-US/fallback_content/
labs/jbosstm/trunk/docs/release_notes/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/docs/release_notes/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/docs/release_notes/en-US/fallback_content/Legal_Notice.xml
labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/fallback_content/
labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/fallback_content/Legal_Notice.xml
labs/jbosstm/trunk/docs/txbridge_guide/en-US/fallback_content/
labs/jbosstm/trunk/docs/txbridge_guide/en-US/fallback_content/Conventions.xml
labs/jbosstm/trunk/docs/txbridge_guide/en-US/fallback_content/Feedback.xml
labs/jbosstm/trunk/docs/txbridge_guide/en-US/fallback_content/Legal_Notice.xml
Removed:
labs/jbosstm/trunk/ArjunaCore/docs/development_guide/publican.cfg
labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/publican.cfg
labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/publican.cfg
labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/publican.cfg
labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/publican.cfg
labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/publican.cfg
labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/publican.cfg
labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/publican.cfg
labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/publican.cfg
labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/publican.cfg
labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/publican-maven.cfg
labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/publican.cfg
labs/jbosstm/trunk/docs/development_guide/publican.cfg
labs/jbosstm/trunk/docs/failure_recovery_guide/publican.cfg
labs/jbosstm/trunk/docs/release_notes/publican.cfg
labs/jbosstm/trunk/docs/transactions_overview_guide/publican.cfg
labs/jbosstm/trunk/docs/txbridge_guide/publican.cfg
Modified:
labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/Book_Info.xml
labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/Preface.xml
labs/jbosstm/trunk/ArjunaCore/docs/development_guide/pom.xml
labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/Book_Info.xml
labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/Preface.xml
labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/pom.xml
labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/Book_Info.xml
labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/Preface.xml
labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/pom.xml
labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/Book_Info.xml
labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/Preface.xml
labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/pom.xml
labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/Book_Info.xml
labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/Preface.xml
labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/pom.xml
labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/Book_Info.xml
labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/Preface.xml
labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/pom.xml
labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/Book_Info.xml
labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/Preface.xml
labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/pom.xml
labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/Book_Info.xml
labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/Preface.xml
labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/pom.xml
labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/Book_Info.xml
labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/Preface.xml
labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/pom.xml
labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/Book_Info.xml
labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/Preface.xml
labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/pom.xml
labs/jbosstm/trunk/XTS/dist/pom.xml
labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/Book_Info.xml
labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/Preface.xml
labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/pom.xml
labs/jbosstm/trunk/docs/development_guide/en-US/Book_Info.xml
labs/jbosstm/trunk/docs/development_guide/en-US/Preface.xml
labs/jbosstm/trunk/docs/development_guide/pom.xml
labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/Book_Info.xml
labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/Preface.xml
labs/jbosstm/trunk/docs/failure_recovery_guide/pom.xml
labs/jbosstm/trunk/docs/release_notes/en-US/Article_Info.xml
labs/jbosstm/trunk/docs/release_notes/pom.xml
labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/Book_Info.xml
labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/Preface.xml
labs/jbosstm/trunk/docs/transactions_overview_guide/pom.xml
labs/jbosstm/trunk/docs/txbridge_guide/en-US/Book_Info.xml
labs/jbosstm/trunk/docs/txbridge_guide/en-US/Preface.xml
labs/jbosstm/trunk/docs/txbridge_guide/pom.xml
labs/jbosstm/trunk/pom.xml
Log:
updated to use jdocbook rather than publican
Modified: labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/Book_Info.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/Book_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/Book_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -25,7 +25,7 @@
<textobject><phrase>Logo</phrase></textobject>
</inlinemediaobject>
</corpauthor>
- <xi:include href="Common_Content/Legal_Notice.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include href="Author_Group.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
</bookinfo>
Modified: labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/Preface.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/Preface.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/Preface.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -4,10 +4,10 @@
]>
<preface id="pref-ArjunaCore_Development_Guide-Preface">
<title>Preface</title>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"/>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Conventions.xml"/> </xi:fallback> </xi:include>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Feedback.xml">
<xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude">
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"/>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Feedback.xml"/> </xi:fallback> </xi:include>
</xi:fallback>
</xi:include>
</preface>
Added: labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaCore/docs/development_guide/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/ArjunaCore/docs/development_guide/pom.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaCore/docs/development_guide/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaCore/docs/development_guide/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -22,40 +22,16 @@
<artifactId>arjunacore-dev-guide</artifactId>
<name>ArjunaCore devguide module</name>
<description>arjunacore dev guide</description>
- <packaging>jar</packaging>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
+ <properties>
+ <docname>ArjunaCore_Development_Guide</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/ArjunaCore/docs/development_guide/publican.cfg
===================================================================
--- labs/jbosstm/trunk/ArjunaCore/docs/development_guide/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaCore/docs/development_guide/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,8 +0,0 @@
-# Config::Simple 4.59
-# Fri Sep 24 12:42:32 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican
-
Modified: labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/Book_Info.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/Book_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/Book_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -24,6 +24,6 @@
<textobject><phrase>Logo</phrase></textobject>
</inlinemediaobject>
</corpauthor>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"/>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Author_Group.xml"/>
</bookinfo>
Modified: labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/Preface.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/Preface.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/Preface.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -4,10 +4,10 @@
]>
<preface id="pref-ArjunaCore_Failure_Recover_Guide-Preface">
<title>Preface</title>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"/>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Conventions.xml"/> </xi:fallback> </xi:include>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Feedback.xml">
<xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude">
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"/>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Feedback.xml"/> </xi:fallback> </xi:include>
</xi:fallback>
</xi:include>
</preface>
Added: labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/pom.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -20,42 +20,18 @@
</parent>
<modelVersion>4.0.0</modelVersion>
<artifactId>arjunacore-fail-guide</artifactId>
- <packaging>jar</packaging>
<name>arjunacore failure guide</name>
<description>arjunacore failure guide</description>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
+ <properties>
+ <docname>ArjunaCore_Failure_Recovery_Guide</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/publican.cfg
===================================================================
--- labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaCore/docs/failure_recovery_guide/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,8 +0,0 @@
-# Config::Simple 4.59
-# Mon Jul 12 10:38:02 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican
-
Modified: labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/Book_Info.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/Book_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/Book_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -21,7 +21,7 @@
<textobject><phrase>Logo</phrase></textobject>
</inlinemediaobject>
</corpauthor>
- <xi:include href="Common_Content/Legal_Notice.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include href="Author_Group.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
</bookinfo>
Modified: labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/Preface.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/Preface.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/Preface.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -15,8 +15,8 @@
</para>
</section>
- <xi:include href="Common_Content/Conventions.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
- <xi:include href="Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude"><xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"><xi:include href="Common_Content/Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Conventions.xml"/> </xi:fallback> </xi:include>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Feedback.xml"/>
</xi:fallback>
</xi:include>
</preface>
Added: labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/pom.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -22,40 +22,16 @@
<artifactId>jbossjta-admin-guide</artifactId>
<name>jta admin guide</name>
<description>jta admin guide</description>
- <packaging>jar</packaging>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
+ <properties>
+ <docname>JBossJTA_Administration_Guide</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/publican.cfg
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/administration_guide/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,7 +0,0 @@
-# Config::Simple 4.59
-# Wed Sep 1 15:11:59 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican
Modified: labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/Book_Info.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/Book_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/Book_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -23,7 +23,7 @@
<textobject><phrase>Logo</phrase></textobject>
</inlinemediaobject>
</corpauthor>
- <xi:include href="Common_Content/Legal_Notice.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include href="Author_Group.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
</bookinfo>
Modified: labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/Preface.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/Preface.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/Preface.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -15,8 +15,8 @@
</para>
</section>
- <xi:include href="Common_Content/Conventions.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
- <xi:include href="Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude"><xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"><xi:include href="Common_Content/Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Conventions.xml"/> </xi:fallback> </xi:include>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Feedback.xml"/>
</xi:fallback>
</xi:include>
</preface>
Added: labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/pom.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -22,40 +22,16 @@
<artifactId>jbossjta-dev-guide</artifactId>
<name>JBossJTA devguide module</name>
<description>jta devguide</description>
- <packaging>jar</packaging>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
+ <properties>
+ <docname>JBossJTA_Development_Guide</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/publican.cfg
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/development_guide/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,7 +0,0 @@
-# Config::Simple 4.59
-# Wed Sep 1 15:11:59 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican
Modified: labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/Book_Info.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/Book_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/Book_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -23,7 +23,7 @@
<textobject><phrase>Logo</phrase></textobject>
</inlinemediaobject>
</corpauthor>
- <xi:include href="Common_Content/Legal_Notice.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include href="Author_Group.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
</bookinfo>
Modified: labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/Preface.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/Preface.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/Preface.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -15,8 +15,8 @@
</para>
</section>
- <xi:include href="Common_Content/Conventions.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
- <xi:include href="Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude"><xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"><xi:include href="Common_Content/Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Conventions.xml"/> </xi:fallback> </xi:include>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Feedback.xml"/>
</xi:fallback>
</xi:include>
</preface>
Added: labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/pom.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -22,40 +22,16 @@
<artifactId>jbossjta-install-guide</artifactId>
<name>jta install guide</name>
<description>jta install guide</description>
- <packaging>jar</packaging>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
+ <properties>
+ <docname>JBossJTA_Installation_Guide</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/publican.cfg
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/installation_guide/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,7 +0,0 @@
-# Config::Simple 4.59
-# Wed Sep 1 15:11:59 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican
Modified: labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/Book_Info.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/Book_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/Book_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -17,7 +17,7 @@
<textobject><phrase>Logo</phrase></textobject>
</inlinemediaobject>
</corpauthor>
- <xi:include href="Common_Content/Legal_Notice.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include href="Author_Group.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
</bookinfo>
Modified: labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/Preface.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/Preface.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/Preface.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -19,11 +19,9 @@
</para>
</section>
- <xi:include href="Common_Content/Conventions.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
- <xi:include href="Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude">
- <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude">
- <xi:include href="Common_Content/Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
- </xi:fallback>
- </xi:include>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Conventions.xml"/> </xi:fallback> </xi:include>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Feedback.xml"/>
+ </xi:fallback>
+ </xi:include>
</preface>
Added: labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/pom.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -22,40 +22,16 @@
<artifactId>jbossjta-quickstart-guide</artifactId>
<name>jta quickstart</name>
<description>jta quickstart</description>
- <packaging>jar</packaging>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
+ <properties>
+ <docname>JBossJTA_Quick_Start_Guide</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/publican.cfg
===================================================================
--- labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTA/docs/quick_start/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,7 +0,0 @@
-# Config::Simple 4.59
-# Wed Sep 1 15:11:59 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican
Modified: labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/Book_Info.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/Book_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/Book_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -23,7 +23,7 @@
<textobject><phrase>Logo</phrase></textobject>
</inlinemediaobject>
</corpauthor>
- <xi:include href="Common_Content/Legal_Notice.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include href="Author_Group.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
</bookinfo>
Modified: labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/Preface.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/Preface.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/Preface.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -16,8 +16,8 @@
</section>
- <xi:include href="Common_Content/Conventions.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
- <xi:include href="Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude"><xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"><xi:include href="Common_Content/Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Conventions.xml"/> </xi:fallback> </xi:include>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Feedback.xml"/>
</xi:fallback>
</xi:include>
</preface>
Added: labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/pom.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -20,42 +20,18 @@
</parent>
<modelVersion>4.0.0</modelVersion>
<artifactId>jbossts-iaa-guide</artifactId>
- <name>JBossJTS Installation and Administration Guide module</name>
+ <name>JBossJTS Administration Guide module</name>
<description>jts admin guide</description>
- <packaging>jar</packaging>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
+ <properties>
+ <docname>JBossJTS_Administration_Guide</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/publican.cfg
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/administration_guide/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,7 +0,0 @@
-# Config::Simple 4.59
-# Wed Sep 1 15:11:59 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican
Modified: labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/Book_Info.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/Book_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/Book_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -23,7 +23,7 @@
<textobject><phrase>Logo</phrase></textobject>
</inlinemediaobject>
</corpauthor>
- <xi:include href="Common_Content/Legal_Notice.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include href="Author_Group.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
</bookinfo>
Modified: labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/Preface.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/Preface.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/Preface.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -36,8 +36,8 @@
</itemizedlist>
</section>
- <xi:include href="Common_Content/Conventions.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
- <xi:include href="Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude"><xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"><xi:include href="Common_Content/Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Conventions.xml"/> </xi:fallback> </xi:include>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Feedback.xml"/>
</xi:fallback>
</xi:include>
</preface>
Added: labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/pom.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -22,40 +22,16 @@
<artifactId>jbossts-dev-guide</artifactId>
<name>JBossJTS devguide module</name>
<description>jts devguide</description>
- <packaging>jar</packaging>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
+ <properties>
+ <docname>JBossJTS_Development_Guide</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/publican.cfg
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/development_guide/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,7 +0,0 @@
-# Config::Simple 4.59
-# Thu Nov 18 09:01:22 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican
Modified: labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/Book_Info.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/Book_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/Book_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -17,7 +17,7 @@
<textobject><phrase>Logo</phrase></textobject>
</inlinemediaobject>
</corpauthor>
- <xi:include href="Common_Content/Legal_Notice.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include href="Author_Group.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
</bookinfo>
Modified: labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/Preface.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/Preface.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/Preface.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -19,11 +19,9 @@
</para>
</section>
- <xi:include href="Common_Content/Conventions.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
- <xi:include href="Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude">
- <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude">
- <xi:include href="Common_Content/Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
- </xi:fallback>
- </xi:include>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Conventions.xml"/> </xi:fallback> </xi:include>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Feedback.xml"/>
+ </xi:fallback>
+ </xi:include>
</preface>
Added: labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/pom.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -20,57 +20,18 @@
</parent>
<modelVersion>4.0.0</modelVersion>
<artifactId>jbossts-orb-guide</artifactId>
- <packaging>jar</packaging>
<name>orb guide</name>
<description>orb portability guide</description>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
- <!--
-
- <packaging>jdocbook</packaging>
- <build>
- <plugins>
- <plugin>
- <groupId>org.jboss.maven.plugins</groupId>
- <artifactId>maven-jdocbook-plugin</artifactId>
- </plugin>
- </plugins>
- </build>
- <properties>
- <docname>JBossJTS_ORB_Portability_Guide</docname>
- </properties>
- -->
+ <properties>
+ <docname>JBossJTS_ORB_Portability_Guide</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/publican.cfg
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/orbportability/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,7 +0,0 @@
-# Config::Simple 4.59
-# Wed Sep 1 15:11:59 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican
Modified: labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/Book_Info.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/Book_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/Book_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -17,7 +17,7 @@
<textobject><phrase>Logo</phrase></textobject>
</inlinemediaobject>
</corpauthor>
- <xi:include href="Common_Content/Legal_Notice.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include href="Author_Group.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
</bookinfo>
Modified: labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/Preface.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/Preface.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/Preface.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -19,11 +19,9 @@
</para>
</section>
- <xi:include href="Common_Content/Conventions.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
- <xi:include href="Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude">
- <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude">
- <xi:include href="Common_Content/Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
- </xi:fallback>
- </xi:include>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Conventions.xml"/> </xi:fallback> </xi:include>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Feedback.xml"/>
+ </xi:fallback>
+ </xi:include>
</preface>
Added: labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/pom.xml
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -20,42 +20,18 @@
</parent>
<modelVersion>4.0.0</modelVersion>
<artifactId>jbossts-quickstart-guide</artifactId>
- <packaging>jar</packaging>
<name>jts quick start</name>
<description>jts quick start</description>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
+ <properties>
+ <docname>JBossJTS_Quick_Start_Guide</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/publican.cfg
===================================================================
--- labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/ArjunaJTS/docs/quick_start/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,7 +0,0 @@
-# Config::Simple 4.59
-# Wed Sep 1 15:11:59 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican
Modified: labs/jbosstm/trunk/XTS/dist/pom.xml
===================================================================
--- labs/jbosstm/trunk/XTS/dist/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/XTS/dist/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -127,10 +127,6 @@
</dependency>
<dependency>
<groupId>org.jboss.narayana.xts</groupId>
- <artifactId>xts-guide</artifactId>
- </dependency>
- <dependency>
- <groupId>org.jboss.narayana.xts</groupId>
<artifactId>xts-demo</artifactId>
</dependency>
<dependency>
Modified: labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/Book_Info.xml
===================================================================
--- labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/Book_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/Book_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -24,7 +24,7 @@
<textobject><phrase>Logo</phrase></textobject>
</inlinemediaobject>
</corpauthor>
- <xi:include href="Common_Content/Legal_Notice.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include href="Author_Group.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
</bookinfo>
Modified: labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/Preface.xml
===================================================================
--- labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/Preface.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/Preface.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -5,8 +5,8 @@
]>
<preface id="pref-Transactions_XTS_Programmers_Guide-Preface">
<title>Preface</title>
- <xi:include href="Common_Content/Conventions.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
- <xi:include href="Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude"><xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"><xi:include href="Common_Content/Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Conventions.xml"/> </xi:fallback> </xi:include>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Feedback.xml"/>
</xi:fallback>
</xi:include>
</preface>
Added: labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/pom.xml
===================================================================
--- labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -22,40 +22,16 @@
<artifactId>xts-guide</artifactId>
<name>XTS Administration and Development Guide</name>
<description>xts admin and dev guide</description>
- <packaging>jar</packaging>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
+ <properties>
+ <docname>Transactions_XTS_Administration_And_Development_Guide</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/publican-maven.cfg
===================================================================
--- labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/publican-maven.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/publican-maven.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,7 +0,0 @@
-# Config::Simple 4.59
-# Wed Sep 1 15:11:59 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican/Transactions_XTS_Administration_And_Development_Guide
Deleted: labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/publican.cfg
===================================================================
--- labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/XTS/docs/Transactions_XTS_Administration_And_Development_Guide/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,8 +0,0 @@
-# Config::Simple 4.59
-# Mon Jul 12 10:38:02 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican
-
Modified: labs/jbosstm/trunk/docs/development_guide/en-US/Book_Info.xml
===================================================================
--- labs/jbosstm/trunk/docs/development_guide/en-US/Book_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/development_guide/en-US/Book_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -23,7 +23,7 @@
<textobject><phrase>Logo</phrase></textobject>
</inlinemediaobject>
</corpauthor>
- <xi:include href="Common_Content/Legal_Notice.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include href="Author_Group.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
</bookinfo>
Modified: labs/jbosstm/trunk/docs/development_guide/en-US/Preface.xml
===================================================================
--- labs/jbosstm/trunk/docs/development_guide/en-US/Preface.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/development_guide/en-US/Preface.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -4,10 +4,10 @@
]>
<preface id="pref-Failure_Recovery_Guide-Preface">
<title>Preface</title>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"/>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Conventions.xml"/> </xi:fallback> </xi:include>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Feedback.xml">
<xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude">
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"/>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Feedback.xml"/> </xi:fallback> </xi:include>
</xi:fallback>
</xi:include>
</preface>
Added: labs/jbosstm/trunk/docs/development_guide/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/docs/development_guide/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/docs/development_guide/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/docs/development_guide/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/docs/development_guide/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/docs/development_guide/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/docs/development_guide/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/docs/development_guide/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/docs/development_guide/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/docs/development_guide/pom.xml
===================================================================
--- labs/jbosstm/trunk/docs/development_guide/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/development_guide/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -20,42 +20,18 @@
</parent>
<modelVersion>4.0.0</modelVersion>
<artifactId>development-guide</artifactId>
- <packaging>jar</packaging>
<name>devguide</name>
<description>devguide</description>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
+ <properties>
+ <docname>Development_Guide</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/docs/development_guide/publican.cfg
===================================================================
--- labs/jbosstm/trunk/docs/development_guide/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/development_guide/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,7 +0,0 @@
-# Config::Simple 4.59
-# Wed Sep 1 15:11:59 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican
Modified: labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/Book_Info.xml
===================================================================
--- labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/Book_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/Book_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -23,6 +23,6 @@
<textobject><phrase>Logo</phrase></textobject>
</inlinemediaobject>
</corpauthor>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"/>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Author_Group.xml"/>
</bookinfo>
Modified: labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/Preface.xml
===================================================================
--- labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/Preface.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/Preface.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -4,10 +4,10 @@
]>
<preface id="pref-Failure_Recovery_Guide-Preface">
<title>Preface</title>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"/>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Conventions.xml"/> </xi:fallback> </xi:include>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Feedback.xml">
<xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude">
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"/>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Feedback.xml"/> </xi:fallback> </xi:include>
</xi:fallback>
</xi:include>
</preface>
Added: labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/docs/failure_recovery_guide/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/docs/failure_recovery_guide/pom.xml
===================================================================
--- labs/jbosstm/trunk/docs/failure_recovery_guide/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/failure_recovery_guide/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -20,42 +20,18 @@
</parent>
<modelVersion>4.0.0</modelVersion>
<artifactId>failure-recovery-guide</artifactId>
- <packaging>jar</packaging>
<name>failure recovery guide</name>
<description>failure recovery guide</description>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
+ <properties>
+ <docname>Failure_Recovery_Guide</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/docs/failure_recovery_guide/publican.cfg
===================================================================
--- labs/jbosstm/trunk/docs/failure_recovery_guide/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/failure_recovery_guide/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,8 +0,0 @@
-# Config::Simple 4.59
-# Mon Jul 12 10:38:02 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican
-
Modified: labs/jbosstm/trunk/docs/release_notes/en-US/Article_Info.xml
===================================================================
--- labs/jbosstm/trunk/docs/release_notes/en-US/Article_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/release_notes/en-US/Article_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -22,7 +22,7 @@
</imageobject>
</inlinemediaobject>
</corpauthor>
- <xi:include href="Common_Content/Legal_Notice.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include href="Author_Group.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
</articleinfo>
Added: labs/jbosstm/trunk/docs/release_notes/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/docs/release_notes/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/docs/release_notes/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/docs/release_notes/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/docs/release_notes/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/docs/release_notes/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/docs/release_notes/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/docs/release_notes/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/docs/release_notes/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/docs/release_notes/pom.xml
===================================================================
--- labs/jbosstm/trunk/docs/release_notes/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/release_notes/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -20,42 +20,18 @@
</parent>
<modelVersion>4.0.0</modelVersion>
<artifactId>release-notes</artifactId>
- <packaging>jar</packaging>
<name>release notes</name>
<description>release notes</description>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
+ <properties>
+ <docname>Release_Notes</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/docs/release_notes/publican.cfg
===================================================================
--- labs/jbosstm/trunk/docs/release_notes/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/release_notes/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,7 +0,0 @@
-# Config::Simple 4.59
-# Thu Dec 9 09:36:41 2010
-
-xml_lang: en-US
-type: Article
-brand: jboss-community
-tmp_dir: target/publican
Modified: labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/Book_Info.xml
===================================================================
--- labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/Book_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/Book_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -23,7 +23,7 @@
<textobject><phrase>Logo</phrase></textobject>
</inlinemediaobject>
</corpauthor>
- <xi:include href="Common_Content/Legal_Notice.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include href="Author_Group.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
</bookinfo>
Modified: labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/Preface.xml
===================================================================
--- labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/Preface.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/Preface.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -5,8 +5,8 @@
]>
<preface id="pref-Transactions_Overview_Guide-Preface">
<title>Preface</title>
- <xi:include href="Common_Content/Conventions.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
- <xi:include href="Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude"><xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"><xi:include href="Common_Content/Feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude" />
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Conventions.xml"/> </xi:fallback> </xi:include>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Feedback.xml"/>
</xi:fallback>
</xi:include>
</preface>
Added: labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/docs/transactions_overview_guide/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/docs/transactions_overview_guide/pom.xml
===================================================================
--- labs/jbosstm/trunk/docs/transactions_overview_guide/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/transactions_overview_guide/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -20,42 +20,18 @@
</parent>
<modelVersion>4.0.0</modelVersion>
<artifactId>transactions-overview-guide</artifactId>
- <packaging>jar</packaging>
<name>tx overview</name>
<description>tx overview</description>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
+ <properties>
+ <docname>Transactions_Overview_Guide</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/docs/transactions_overview_guide/publican.cfg
===================================================================
--- labs/jbosstm/trunk/docs/transactions_overview_guide/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/transactions_overview_guide/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,8 +0,0 @@
-# Config::Simple 4.59
-# Mon Jul 12 10:38:02 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican
-
Modified: labs/jbosstm/trunk/docs/txbridge_guide/en-US/Book_Info.xml
===================================================================
--- labs/jbosstm/trunk/docs/txbridge_guide/en-US/Book_Info.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/txbridge_guide/en-US/Book_Info.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -17,6 +17,6 @@
<textobject><phrase>Logo</phrase></textobject>
</inlinemediaobject>
</corpauthor>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"/>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Legal_Notice.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Legal_Notice.xml"/> </xi:fallback> </xi:include>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Author_Group.xml"/>
</bookinfo>
Modified: labs/jbosstm/trunk/docs/txbridge_guide/en-US/Preface.xml
===================================================================
--- labs/jbosstm/trunk/docs/txbridge_guide/en-US/Preface.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/txbridge_guide/en-US/Preface.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -4,10 +4,10 @@
]>
<preface id="pref-Transaction_Bridging_Guide-Preface">
<title>Preface</title>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"/>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Conventions.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Conventions.xml"/> </xi:fallback> </xi:include>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Feedback.xml">
<xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude">
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"/>
+ <!--FOR PUBLICAN --> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Common_Content/Feedback.xml"> <!--FOR JDOCBOOK:--> <xi:fallback xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="fallback_content/Feedback.xml"/> </xi:fallback> </xi:include>
</xi:fallback>
</xi:include>
</preface>
Added: labs/jbosstm/trunk/docs/txbridge_guide/en-US/fallback_content/Conventions.xml
===================================================================
--- labs/jbosstm/trunk/docs/txbridge_guide/en-US/fallback_content/Conventions.xml (rev 0)
+++ labs/jbosstm/trunk/docs/txbridge_guide/en-US/fallback_content/Conventions.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,175 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>Document Conventions</title>
+ <para>
+ This manual uses several conventions to highlight certain words and phrases and draw attention to specific pieces of information.
+ </para>
+ <para>
+ In PDF and paper editions, this manual uses typefaces drawn from the <ulink url="https://fedorahosted.org/liberation-fonts/">Liberation Fonts</ulink> set. The Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not, alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes the Liberation Fonts set by default.
+ </para>
+ <section>
+ <title>Typographic Conventions</title>
+ <para>
+ Four typographic conventions are used to call attention to specific words and phrases. These conventions, and the circumstances they apply to, are as follows.
+ </para>
+ <para>
+ <literal>Mono-spaced Bold</literal>
+ </para>
+ <para>
+ Used to highlight system input, including shell commands, file names and paths. Also used to highlight keycaps and key combinations. For example:
+ </para>
+ <blockquote>
+ <para>
+ To see the contents of the file <filename>my_next_bestselling_novel</filename> in your current working directory, enter the <command>cat my_next_bestselling_novel</command> command at the shell prompt and press <keycap>Enter</keycap> to execute the command.
+ </para>
+
+ </blockquote>
+ <para>
+ The above includes a file name, a shell command and a keycap, all presented in mono-spaced bold and all distinguishable thanks to context.
+ </para>
+ <para>
+ Key combinations can be distinguished from keycaps by the hyphen connecting each part of a key combination. For example:
+ </para>
+ <blockquote>
+ <para>
+ Press <keycap>Enter</keycap> to execute the command.
+ </para>
+ <para>
+ Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> to switch to the first virtual terminal. Press <keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F1</keycap></keycombo> to return to your X-Windows session.
+ </para>
+
+ </blockquote>
+ <para>
+ The first paragraph highlights the particular keycap to press. The second highlights two key combinations (each a set of three keycaps with each set pressed simultaneously).
+ </para>
+ <para>
+ If source code is discussed, class names, methods, functions, variable names and returned values mentioned within a paragraph will be presented as above, in <literal>mono-spaced bold</literal>. For example:
+ </para>
+ <blockquote>
+ <para>
+ File-related classes include <classname>filesystem</classname> for file systems, <classname>file</classname> for files, and <classname>dir</classname> for directories. Each class has its own associated set of permissions.
+ </para>
+
+ </blockquote>
+ <para>
+ <application>Proportional Bold</application>
+ </para>
+ <para>
+ This denotes words or phrases encountered on a system, including application names; dialog box text; labeled buttons; check-box and radio button labels; menu titles and sub-menu titles. For example:
+ </para>
+ <blockquote>
+ <para>
+ Choose <menuchoice><guimenu>System</guimenu><guisubmenu>Preferences</guisubmenu><guimenuitem>Mouse</guimenuitem></menuchoice> from the main menu bar to launch <application>Mouse Preferences</application>. In the <guilabel>Buttons</guilabel> tab, click the <guilabel>Left-handed mouse</guilabel> check box and click <guibutton>Close</guibutton> to switch the primary mouse button from the left to the right (making the mouse suitable for use in the left hand).
+ </para>
+ <para>
+ To insert a special character into a <application>gedit</application> file, choose <menuchoice><guimenu>Applications</guimenu><guisubmenu>Accessories</guisubmenu><guimenuitem>Character Map</guimenuitem></menuchoice> from the main menu bar. Next, choose <menuchoice><guimenu>Search</guimenu><guimenuitem>Find…</guimenuitem></menuchoice> from the <application>Character Map</application> menu bar, type the name of the character in the <guilabel>Search</guilabel> field and click <guibutton>Next</guibutton>. The character you sought will be highlighted in the <guilabel>Character Table</guilabel>. Double-click this highlighted character to place it in the <guilabel>Text to copy</guilabel> field and then click the <guibutton>Copy</guibutton> button. Now switch back to your document and choose <menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></menuchoice> from the <application>gedit</application> menu bar.
+ </para>
+
+ </blockquote>
+ <para>
+ The above text includes application names; system-wide menu names and items; application-specific menu names; and buttons and text found within a GUI interface, all presented in proportional bold and all distinguishable by context.
+ </para>
+ <para>
+ <command><replaceable>Mono-spaced Bold Italic</replaceable></command> or <application><replaceable>Proportional Bold Italic</replaceable></application>
+ </para>
+ <para>
+ Whether mono-spaced bold or proportional bold, the addition of italics indicates replaceable or variable text. Italics denotes text you do not input literally or displayed text that changes depending on circumstance. For example:
+ </para>
+ <blockquote>
+ <para>
+ To connect to a remote machine using ssh, type <command>ssh <replaceable>username</replaceable>@<replaceable>domain.name</replaceable></command> at a shell prompt. If the remote machine is <filename>example.com</filename> and your username on that machine is john, type <command>ssh john at example.com</command>.
+ </para>
+ <para>
+ The <command>mount -o remount <replaceable>file-system</replaceable></command> command remounts the named file system. For example, to remount the <filename>/home</filename> file system, the command is <command>mount -o remount /home</command>.
+ </para>
+ <para>
+ To see the version of a currently installed package, use the <command>rpm -q <replaceable>package</replaceable></command> command. It will return a result as follows: <command><replaceable>package-version-release</replaceable></command>.
+ </para>
+
+ </blockquote>
+ <para>
+ Note the words in bold italics above — username, domain.name, file-system, package, version and release. Each word is a placeholder, either for text you enter when issuing a command or for text displayed by the system.
+ </para>
+ <para>
+ Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and important term. For example:
+ </para>
+ <blockquote>
+ <para>
+ Publican is a <firstterm>DocBook</firstterm> publishing system.
+ </para>
+
+ </blockquote>
+
+ </section>
+
+ <section>
+ <title>Pull-quote Conventions</title>
+ <para>
+ Terminal output and source code listings are set off visually from the surrounding text.
+ </para>
+ <para>
+ Output sent to a terminal is set in <computeroutput>mono-spaced roman</computeroutput> and presented thus:
+ </para>
+
+<screen>books Desktop documentation drafts mss photos stuff svn
+books_tests Desktop1 downloads images notes scripts svgs</screen>
+ <para>
+ Source-code listings are also set in <computeroutput>mono-spaced roman</computeroutput> but add syntax highlighting as follows:
+ </para>
+
+<programlisting language="Java">package org.jboss.book.jca.ex1;
+
+import javax.naming.InitialContext;
+
+public class ExClient
+{
+ public static void main(String args[])
+ throws Exception
+ {
+ InitialContext iniCtx = new InitialContext();
+ Object ref = iniCtx.lookup("EchoBean");
+ EchoHome home = (EchoHome) ref;
+ Echo echo = home.create();
+
+ System.out.println("Created Echo");
+
+ System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
+ }
+}</programlisting>
+
+ </section>
+
+ <section>
+ <title>Notes and Warnings</title>
+ <para>
+ Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
+ </para>
+ <note>
+ <title>Note</title>
+ <para>
+ Notes are tips, shortcuts or alternative approaches to the task at hand. Ignoring a note should have no negative consequences, but you might miss out on a trick that makes your life easier.
+ </para>
+
+ </note>
+ <important>
+ <title>Important</title>
+ <para>
+ Important boxes detail things that are easily missed: configuration changes that only apply to the current session, or services that need restarting before an update will apply. Ignoring a box labeled 'Important' will not cause data loss but may cause irritation and frustration.
+ </para>
+
+ </important>
+ <warning>
+ <title>Warning</title>
+ <para>
+ Warnings should not be ignored. Ignoring warnings will most likely cause data loss.
+ </para>
+
+ </warning>
+
+ </section>
+
+</section>
+
+
Added: labs/jbosstm/trunk/docs/txbridge_guide/en-US/fallback_content/Feedback.xml
===================================================================
--- labs/jbosstm/trunk/docs/txbridge_guide/en-US/fallback_content/Feedback.xml (rev 0)
+++ labs/jbosstm/trunk/docs/txbridge_guide/en-US/fallback_content/Feedback.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,16 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<section>
+ <title>We Need Feedback!</title>
+ <indexterm>
+ <primary>feedback</primary>
+ <secondary>contact information for this manual</secondary>
+
+ </indexterm>
+ <para>
+ You should over ride this by creating your own local Feedback.xml file.
+ </para>
+</section>
+
+
Added: labs/jbosstm/trunk/docs/txbridge_guide/en-US/fallback_content/Legal_Notice.xml
===================================================================
--- labs/jbosstm/trunk/docs/txbridge_guide/en-US/fallback_content/Legal_Notice.xml (rev 0)
+++ labs/jbosstm/trunk/docs/txbridge_guide/en-US/fallback_content/Legal_Notice.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -0,0 +1,9 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!DOCTYPE legalnotice PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+]>
+<legalnotice>
+ <para>
+ Copyright <trademark class="copyright"></trademark> &YEAR; &HOLDER; This material may only be distributed subject to the terms and conditions set forth in the GNU Free Documentation License (GFDL), V1.2 or later (the latest version is presently available at <ulink url="http://www.gnu.org/licenses/fdl.txt">http://www.gnu.org/licenses/fdl.txt</ulink>).
+ </para>
+</legalnotice>
+
Modified: labs/jbosstm/trunk/docs/txbridge_guide/pom.xml
===================================================================
--- labs/jbosstm/trunk/docs/txbridge_guide/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/txbridge_guide/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -20,42 +20,18 @@
</parent>
<modelVersion>4.0.0</modelVersion>
<artifactId>txbridge-guide</artifactId>
- <packaging>jar</packaging>
<name>txbridge guide</name>
<description>txbridge guide</description>
+ <packaging>jdocbook</packaging>
<build>
- <outputDirectory>target/publican</outputDirectory>
<plugins>
<plugin>
- <artifactId>maven-antrun-plugin</artifactId>
- <version>1.6</version>
- <executions>
- <execution>
- <phase>compile</phase>
- <configuration>
- <target unless="skipPublican">
- <exec dir="." executable="publican" failonerror="true">
- <arg value="build"/>
- <arg value="--langs=en-US"/>
- <arg value="--formats=pdf"/>
- <arg value="--config=publican.cfg"/>
- </exec>
- </target>
- </configuration>
- <goals>
- <goal>run</goal>
- </goals>
- </execution>
- </executions>
+ <groupId>org.jboss.maven.plugins</groupId>
+ <artifactId>maven-jdocbook-plugin</artifactId>
</plugin>
- <plugin>
- <artifactId>maven-jar-plugin</artifactId>
- <configuration>
- <includes>
- <include>**/*.pdf</include>
- </includes>
- </configuration>
- </plugin>
</plugins>
</build>
+ <properties>
+ <docname>Transaction_Bridging_Guide</docname>
+ </properties>
</project>
Deleted: labs/jbosstm/trunk/docs/txbridge_guide/publican.cfg
===================================================================
--- labs/jbosstm/trunk/docs/txbridge_guide/publican.cfg 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/docs/txbridge_guide/publican.cfg 2011-07-28 13:02:50 UTC (rev 37316)
@@ -1,8 +0,0 @@
-# Config::Simple 4.59
-# Mon Jul 12 10:38:02 2010
-
-xml_lang: en-US
-type: Book
-brand: jboss-community
-tmp_dir: target/publican
-
Modified: labs/jbosstm/trunk/pom.xml
===================================================================
--- labs/jbosstm/trunk/pom.xml 2011-07-28 10:04:44 UTC (rev 37315)
+++ labs/jbosstm/trunk/pom.xml 2011-07-28 13:02:50 UTC (rev 37316)
@@ -595,11 +595,6 @@
</dependency>
<dependency>
<groupId>org.jboss.narayana.xts</groupId>
- <artifactId>xts-guide</artifactId>
- <version>${project.version}</version>
- </dependency>
- <dependency>
- <groupId>org.jboss.narayana.xts</groupId>
<artifactId>xts-demo</artifactId>
<version>${project.version}</version>
</dependency>
More information about the jboss-svn-commits
mailing list