[jbosstools-issues] [JBoss JIRA] Updated: (JBIDE-3494) using source tab breaks Diagram view (UI changes are not undone cleanly)
Nick Boldt (JIRA)
jira-events at lists.jboss.org
Tue Jan 6 15:33:04 EST 2009
[ https://jira.jboss.org/jira/browse/JBIDE-3494?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]
Nick Boldt updated JBIDE-3494:
------------------------------
Summary: using source tab breaks Diagram view (UI changes are not undone cleanly) (was: using source tab breaks design view (UI changes are not undone cleanly))
Workaround Description: After editing in the source tab, save and close. Reopen the processdefinition.xml file, and manually reposition nodes in the Design view. This is a nuisance, but at least all that's lost is layout data, nothing more. (was: After editing in the source tab, save and close. Manually reorder nodes in the Design view. This is a nuisance, but at least all that's lost is layout data, nothing more.)
Description:
Tested with JBoss Dev Studio Version: 2.0.0.CR1, Build id: R200812221144
Steps to repro:
1. Install JBDS.
2. download http://www.jboss.org/downloading/?projectId=jbossjbpm&url=http://downloads.sourceforge.net/jbpm/jbpm-installer-3.3.0.GA.jar
3. `java -jar jbpm-installer-3.3.0.GA.jar`. I installed into ~/jbpm-3.3.0.GA
4. New > Other > Process Project
5. Go into src/main/jpdl/simple and open processdefinition.xml with jBPM Graphical Process Designer
6. Add a couple nodes, then connect them to the existing flow. Or create your own.
7. Switch to Source tab. I had this:
<?xml version="1.0" encoding="UTF-8"?>
<process-definition xmlns="urn:jbpm.org:jpdl-3.2" name="simple">
<start-state name="start-state1">
<transition to="state1"></transition>
</start-state>
<state name="state1">
<transition to="end-state2"></transition>
</state>
<end-state name="end-state2"></end-state>
</process-definition>
and gpd.xml contained this -- three nodes in top-left to bottom-right cascade:
<?xml version="1.0" encoding="UTF-8"?>
<root-container name="simple" width="1058" height="740">
<node name="start-state1" x="32" y="19" width="132" height="36">
<edge>
<label x="5" y="-10"/>
</edge>
</node>
<node name="state1" x="77" y="103" width="132" height="36">
<edge>
<label x="5" y="-10"/>
</edge>
</node>
<node name="end-state2" x="115" y="203" width="132" height="36"/>
</root-container>
8. On the Source tab of the jBPM editor, select the middle state node and cut it out (CTRL-X). Note the outline view refreshes correctly.
9. Paste it back in, perhaps in the same location from where it was cut. (Use case: user wants to reorder the XML for personal taste reasons, or accidentally deleted and restored a block of XML).
10. Switch to diagram view. The middle node "state1" is now at (0,0) instead of where it used to be, eg., at (77,103)
was:
Tested with JBoss Dev Studio Version: 2.0.0.CR1, Build id: R200812221144
Steps to repro:
1. Install JBDS.
2. download http://www.jboss.org/downloading/?projectId=jbossjbpm&url=http://downloads.sourceforge.net/jbpm/jbpm-installer-3.3.0.GA.jar
3. `java -jar jbpm-installer-3.3.0.GA.jar`. I installed into ~/jbpm-3.3.0.GA
4. New > Other > Process Project
5. Go into src/main/jpdl/simple and open processdefinition.xml with jBPM Graphical Process Designer
6. Add a couple nodes, then connect them to the existing flow. Or create your own.
7. Switch to Source tab. I had this:
<?xml version="1.0" encoding="UTF-8"?>
<process-definition xmlns="urn:jbpm.org:jpdl-3.2" name="simple">
<start-state name="start-state1">
<transition to="state1"></transition>
</start-state>
<state name="state1">
<transition to="end-state2"></transition>
</state>
<end-state name="end-state2"></end-state>
</process-definition>
and gpd.xml contained this -- three nodes in top-left to bottom-right cascade:
<?xml version="1.0" encoding="UTF-8"?>
<root-container name="simple" width="1058" height="740">
<node name="start-state1" x="32" y="19" width="132" height="36">
<edge>
<label x="5" y="-10"/>
</edge>
</node>
<node name="state1" x="77" y="103" width="132" height="36">
<edge>
<label x="5" y="-10"/>
</edge>
</node>
<node name="end-state2" x="115" y="203" width="132" height="36"/>
</root-container>
8. On the Source tab of the jBPM editor, select the middle state node and cut it out (CTRL-X). Note the outline view refreshes correctly.
9. Paste it back in, perhaps in the same location from where it was cut. (Use case: user wants to reorder the XML for personal taste reasons, or accidentally deleted and restored a block of XML).
10. Switch to diagram view. The middle node is now at 0,0 instead of where it used to be, eg., at (77,103)
> using source tab breaks Diagram view (UI changes are not undone cleanly)
> ------------------------------------------------------------------------
>
> Key: JBIDE-3494
> URL: https://jira.jboss.org/jira/browse/JBIDE-3494
> Project: Tools (JBoss Tools)
> Issue Type: Bug
> Components: jbpm
> Affects Versions: 3.0.0.cr1
> Reporter: Nick Boldt
> Priority: Minor
>
> Tested with JBoss Dev Studio Version: 2.0.0.CR1, Build id: R200812221144
> Steps to repro:
> 1. Install JBDS.
> 2. download http://www.jboss.org/downloading/?projectId=jbossjbpm&url=http://downloads.sourceforge.net/jbpm/jbpm-installer-3.3.0.GA.jar
> 3. `java -jar jbpm-installer-3.3.0.GA.jar`. I installed into ~/jbpm-3.3.0.GA
> 4. New > Other > Process Project
> 5. Go into src/main/jpdl/simple and open processdefinition.xml with jBPM Graphical Process Designer
> 6. Add a couple nodes, then connect them to the existing flow. Or create your own.
> 7. Switch to Source tab. I had this:
> <?xml version="1.0" encoding="UTF-8"?>
> <process-definition xmlns="urn:jbpm.org:jpdl-3.2" name="simple">
> <start-state name="start-state1">
> <transition to="state1"></transition>
> </start-state>
> <state name="state1">
> <transition to="end-state2"></transition>
> </state>
> <end-state name="end-state2"></end-state>
> </process-definition>
> and gpd.xml contained this -- three nodes in top-left to bottom-right cascade:
> <?xml version="1.0" encoding="UTF-8"?>
> <root-container name="simple" width="1058" height="740">
> <node name="start-state1" x="32" y="19" width="132" height="36">
> <edge>
> <label x="5" y="-10"/>
> </edge>
> </node>
> <node name="state1" x="77" y="103" width="132" height="36">
> <edge>
> <label x="5" y="-10"/>
> </edge>
> </node>
> <node name="end-state2" x="115" y="203" width="132" height="36"/>
> </root-container>
> 8. On the Source tab of the jBPM editor, select the middle state node and cut it out (CTRL-X). Note the outline view refreshes correctly.
> 9. Paste it back in, perhaps in the same location from where it was cut. (Use case: user wants to reorder the XML for personal taste reasons, or accidentally deleted and restored a block of XML).
> 10. Switch to diagram view. The middle node "state1" is now at (0,0) instead of where it used to be, eg., at (77,103)
--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators: https://jira.jboss.org/jira/secure/Administrators.jspa
-
For more information on JIRA, see: http://www.atlassian.com/software/jira
More information about the jbosstools-issues
mailing list