[keycloak-dev] How to setup a maven project generating jar containing authentication providers in a debug mode in eclipse

[Rashmi Singh]

Does anyone have a clue on this issue I am having?

On Sat, Jul 2, 2016 at 7:13 PM, Rashmi Singh <singhrasster at gmail.com> wrote:

> Thanks for your reply Francis. I still have one problem:
>
> When I run this:
> $ docker run --name keycloak1 -p 8080:8080 -p 8787:8787 jboss/keycloak
>
> I can access the keycloak app console on http://192.168.99.100:8080/auth/
> from my browser
>
> But when I run it in debug mode as:
> $ docker run --name keycloak1 -p 8080:8080 -p 8787:8787 jboss/keycloak
> --debug
>
> I cannot access the keycloak console. What is wrong here, any idea?
>
> On Fri, Jul 1, 2016 at 12:48 AM, Francis Pouatcha <
> francis.pouatcha at adorsys.com> wrote:
>
>> Rashmi,
>>
>> follow these instructions to have keycloack debug accessible from eclipse:
>>
>> 1- Simple web application
>> User a simple HelloServlet to try out the debugging process before
>> applying you experience to wildfly.
>>
>> 1- Wildfly and eclipse
>> Like Thomas mentioned, Make sure you active the debug property while
>> starting wildfly. This is independent of keycloak, as keycloak is just
>> another web application running on wildfly. So make sure you have a simple
>> webapp running in wildfly standalone so you can get used to the debugging
>> process.
>>
>> 2- Wildfly in a docker container
>> Take your simple web application and wildfly into a docker container and
>> try following:
>> a) Make sure you start wildfly in the container in debug mode. Not matter
>> how you manage the docker containers in your development environment, you
>> will have to expose their ports so you can reach the container from and
>> outside the docker host. "Exposing the port means mapping the defined
>> wildfly ports to some other ports on the docker host. If you are using
>> docker-composer you have to try something like:   ports:\    - "8080:8080"\
>>    - "8787:8787". In this case see the docker-compose reference for details.
>>
>> 3- Accessing the docker container
>> Once you wildfly docker container is startet in debug mode, make sure you
>> can access you HelloServlet  from a web browser on the same machine on
>> which you have your eclipse installed. If this works, use the same hostname
>> or ip to replace "localhost" in you eclipse debugging config. Generally
>> this will default to: 192.168.99.100:8787.
>>
>> You did it right, you will be able to stop on the breakpoint inside your
>> HelloServlet.
>>
>> 4- Keycloak
>> Repeat the same procedure with your custom authenticator. Do not forget
>> to download the keycloak sources and include them in your the source path
>> so you can navigate and set break points.
>>
>>
>> Best regards
>> Mit freundlichen Grüßen
>> Cordialement
>>
>> Francis Pouatcha
>> Founder and Technical Lead Group Adorsys
>>
>> LinkedIn: http://www.linkedin.com/pub/francis-pouatcha/8/35a/542
>> adorsys GmbH & Co. KG, Germany:
>> http://www.youtube.com/watch?v=rVRkFGUNexo&authuser=0
>> Adorsys S.A., Cameroon: "African Software Competence Center"
>> Open https://github.com/adorsys
>>
>> Cell USA: +1 770 329 7026
>> Cell Germany: +49 172 18 16 074
>> Cell Cameroon: +237 51 74 71 99
>>
>>
>> On Fri, Jul 1, 2016 at 2:39 AM, Rashmi Singh <singhrasster at gmail.com>
>> wrote:
>>
>>> Thanks Thomas for your reply. I have a few questions on your response. I
>>> am still very new to docker, so please bear with me.
>>> when you say I can set env variables in docker container, would this be
>>> sufficient?
>>>
>>> First connect to the docker container as:
>>>
>>> docker exec -i -t keycloak bash
>>> Then, once I am in the container, I run the following to set env
>>> variables?
>>>
>>> set DEBUG_MODE=true
>>> set DEBUG_PORT=8787
>>> exit
>>> Then, restart the container as:
>>> docker restart keycloak    (keycloak is the name of my container)
>>> Also, how can I make sure that the env variable got correctly set in the
>>> docker container? From inside the container, if I run the command "env",
>>> should it list these new env variables if they are added successfully?
>>>
>>> Then, when you say "......default on port 8787 which you need to expose
>>> on your docker container or use the container interface...", what exactly
>>> do you mean? Do you mean some sort of port forwarding? Could you tell me w
>>> tohat exactly I need to do with my existing container named as "keycloak"
>>>
>>> Then, on eclipse, where you mentioned the settings for the Debug
>>> configurations, what should be the hostname there? would it be localhost?
>>> or the default machine IP of docker which is 192.168.99.100? Or it should
>>> be something else?
>>>
>>>
>>>
>>> On Thu, Jun 30, 2016 at 6:29 PM, Thomas Darimont <
>>> thomas.darimont at googlemail.com> wrote:
>>>
>>>> Hello,
>>>>
>>>> you could add -debug flag to the standalone.sh command-line or define
>>>> the following env variables in your docker container:
>>>> set DEBUG_MODE=true
>>>> set DEBUG_PORT=8787
>>>>
>>>> this will start keycloak with remote debugging enabled by default on
>>>> port 8787 which you need to expose on your docker container or use the
>>>> container interface...
>>>>
>>>> you can then connect to the keycloak instance inside the docker
>>>> container via the remote debugger from your IDE.
>>>> For eclipse just go to "Debug configurations..." -> Remote Java
>>>> Application -> select your project with the custom authenticator -> adjust
>>>> hostname and port and click "debug".
>>>>
>>>> Cheers,
>>>> Thomas
>>>>
>>>> 2016-07-01 0:26 GMT+02:00 Rashmi Singh <singhrasster at gmail.com>:
>>>>
>>>>> We have a Maven project setup on Eclipse that uses some keycloak
>>>>> features and we generate a jar that contains our AuthenticationProvider
>>>>> classes etc.
>>>>> We use docker for the deployment. We basically run a jboss/keycloak
>>>>> image there
>>>>> We have a shell script that has a bunch of commands to copy our
>>>>> project jars from local to the keycloak image on docker container like:
>>>>>
>>>>> docker cp /customauthenticator-1.0.0-SNAPSHOT.jar
>>>>> keycloak:/home/modules/xxx.yyy.zz.keycloak.customizations
>>>>> ....
>>>>> docker restart keycloak
>>>>>
>>>>> Running this shell script deploys everything on keycloak on docker.
>>>>> And so far we are just putting logs throughout our code to debug
>>>>> issues.
>>>>> We want to be able to setup a debugging environment on our eclipse. I
>>>>> am not sure how to achieve this when we use keycloak. Because, here we
>>>>> basically build our modules or authenticator jars etc and copy them to
>>>>> keycloak directories. So, it's not a standalone project war file that we
>>>>> are directly deploying to app server as such. So, then how do we put our
>>>>> maven project (creating jars etc) in a debug mode in eclipse? Is it
>>>>> possible? How?
>>>>>
>>>>> _______________________________________________
>>>>> keycloak-dev mailing list
>>>>> keycloak-dev at lists.jboss.org
>>>>> https://lists.jboss.org/mailman/listinfo/keycloak-dev
>>>>>
>>>>
>>>>
>>>
>>> _______________________________________________
>>> keycloak-dev mailing list
>>> keycloak-dev at lists.jboss.org
>>> https://lists.jboss.org/mailman/listinfo/keycloak-dev
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.jboss.org/pipermail/keycloak-dev/attachments/20160706/69b24f69/attachment.html