[keycloak-dev] PAM integration with FreeIPA

Fri Jun 24 10:10:59 EDT 2016

On 24 June 2016 at 16:08, Bruno Oliveira <bruno at abstractj.org> wrote:

> On 2016-06-24, Stian Thorgersen wrote:
> > On 24 June 2016 at 15:07, Bruno Oliveira <bruno at abstractj.org> wrote:
> >
> > > On 2016-06-23, Bill Burke wrote:
> > > >
> > > >
> > > > On 6/23/16 2:56 PM, Bruno Oliveira wrote:
> > > > > On 2016-06-23, Bill Burke wrote:
> > > > > >
> > > > > >
> > > > > > On 6/23/16 12:25 PM, John Dennis wrote:
> > > > > > > On 06/23/2016 10:00 AM, Bruno Oliveira wrote:
> > > > > > > > Good morning,
> > > > > > > >
> > > > > > > > One of the use case scenarios described for FreeIPA, is the
> > > integration via PAM
> > > > > > > > and SSSD, which "automagically" handles the authentication
> > > against the IdM.
> > > > > > > >
> > > > > > > > This first step requires pretty much an IPA setup, but
> > > > > > > > works with libpam4j[1]. Now, thinking about Keycloak, I
> > > > > > > > would like to have an Authenticator for PAM[2], which is
> pretty
> > > much our
> > > > > > > > UsernamePasswordForm + PAM. Does it make sense?
> > > > > > > >
> > > > > > > > Current flow:
> > > > > > > >
> > > > > > > > * User logs into Web application with username/password
> > > > > > > > * PAM authenticator collects data and authenticate against
> PAM
> > > > > > > > * SSSD authenticates against IdM
> > > > > > > > * Authentication is complete
> > > > > > > >
> > > > > > > > After the last step, should we propagate that user to our
> > > database?
> > > > > > > > Maybe, like Marek already mentioned, have a
> > > SSSDFederationProvider?
> > > > > > > >
> > > > > > > > [1] -
> > > > > > > >
> > >
> http://search.maven.org/#artifactdetails%7Corg.abstractj%7Clibpam4j%7C1.9.0%7Cjar
> > > > > > > > [2] -
> > >
> https://keycloak.gitbooks.io/server-developer-guide/content/topics/auth-spi.html
> > > > > > >
> > > > > > > Simo brought up a concern after forwarding this to our internal
> > > identity
> > > > > > > team list. His comment is:
> > > > > > >
> > > > > > >  >
> > > > > > >  > Current flow:
> > > > > > >  >
> > > > > > >  > * User logs into Web application with username/password
> > > > > > >  > * PAM authenticator collects data and authenticate against
> PAM
> > > > > > >
> > > > > > > I am worried about how these 2 steps are expressed, it seem to
> > > imply PAM
> > > > > > > is used only as a username/password verifier.
> > > > > > > There is no mention/awarness of PAM conversations where we can
> > > prompt
> > > > > > > for things like second factors or password changes.
> > > > > > >
> > > > > >
> > > > > > Ok, I've spent maybe 20 seconds googling into what PAM
> conversations
> > > are
> > > > > > "PAM example conversation code".   You'll have to explain to me
> why
> > > PAM
> > > > > > conversations have any relevance to web login.  Just looking at
> this
> > > > > > example:
> > > > > >
> > > > > >
> > >
> https://www.freebsd.org/doc/en_US.ISO8859-1/articles/pam/pam-sample-conv.html
> > > > > >
> > > > > > It looks as if PAM conversations are targeted to simple text
> logins
> > > > > > (i.e. SSH, telnet, etc.).  Pushing and pulling text to and from
> stdin
> > > > > > and stdout.  What does that have to do with web login?
> > > > >
> > > > > Your question is totally fair. And the reason why we have to
> integrate
> > > > > with PAM is pretty much because there's no DBus interface for SSSD
> > > > > to provide username/password. Otherwise we would just communicate
> > > > > directly with DBus and call it a day.
> > > > >
> > > >
> > > > This is solely to allow keycloak to update passwords?  Not really
> > > > understanding here.
> > >
> > > Not really Bill, to give you more context. Login through PAM is just
> one
> > > of the scenarios described by Dmitri at slide #19[1].
> > >
> > > * User starts browser and connects to a resource
> > > * Resource redirects to Keycloak
> > > * User is presented with a login form
> > > * User fills username and password
> > > * User data is collected and passed to SSSD over D-Bus
> > >
> > > Here, we can't provide username/password to SSSD, because we don't have
> > > a DBus interface for it. So instead, we make use of PAM to make it
> happen.
> > >
> >
> > Isn't the flow actually:
> >
> > * User starts browser and connects to a resource
> > * Resource redirects to Keycloak
> > * User is presented with a login form
> > * User fills username and password
> > * Username and password is verified through PAM (in the future SSSD once
> > that becomes available) - this should be a custom authenticator
> > * User profile is retrieved from SSSD over D-Bus - this should be a
> custom
> > user federation provider
>
> That's correct, I just quoted the original slides for reference
> and added the notes (maybe was more confuse than helpful).
>
> After the retrieval of user's profile from SSSD. Should the data be
> propagated
> to Keycloak database? Should we validate such credentials on the next
> login?
>

The user profile would currently be imported into Keycloak database as
that's how user federation currently works. Bill is working on changing
that though so user profile would not be imported in the future.

Not sure what you mean about validate such credentials - username/password
would always be verified against PAM

>
> > * Done
> >
> >
> > >
> > > * SSSD authenticates against AD
> > > * Authentication complete (against FreeIPA)
> > >
> > > This is where I need some help to define what would be the best next
> > > step for us.
> > >
> > > * Assertion/token is issued
> > > * User is redirected to the resource
> > >
> > > In this scenario nothing is stored/updated on Keycloak.
> > >
> > > >
> > > > > The goal is pretty much to be used for Basic Authentication.
> > > > >
> > > > > >
> > > > > > As for PAM itself, it looks like it is a library.  (again a 20
> second
> > > > >
> > > > > It's pretty much a low level authentication module to support
> multiple
> > > > > schemes like: login, ftp, ssh, telnet...(you certainly found it
> > > already)
> > > > >
> > > > > > Google search).  What I don't know is where PAM ends and SSSD
> takes
> > > > > > over.  So its hard to give you advice.
> > > > >
> > > > > This is how it happens from my understanding:
> > > > >
> > > > > 1. We start the PAM conversation from our client application (a IPA
> > > client machine),
> > > > > pam_sss is contacted (SSSD)
> > > > > 2. SSSD's PAM responder receives the authentication request and
> > > forwards
> > > > > it to FreeIPA server
> > > > > 3. FreeIPA server process the request and returns the result back
> to
> > > PAM
> > > > > responder.
> > > > >
> > > > > The data flow is better described here (
> > >
> https://fedorahosted.org/sssd/wiki/InternalsDocs#a3.2.2.2.DataFlowPAMResponder
> > > ).
> > > > >
> > > >
> > > > It looks like a conversation requires some sort of session object or
> > > session
> > > > connection.  Remember, a web login can span multiple requests and
> could
> > > > possibly be serviced on different machines.  Sounds like any
> integration
> > > > with PAM is going to be quite limited.  Maybe that's what you are
> getting
> > > > at?
> > >
> > > I fully understand that, certainly something that requires more testing
> > > to see how SSSD will behave with PAM.
> > >
> > > >
> > > > Or are you just talking about writing a client adapter and this has
> > > nothing
> > > > to do with the Keycloak auth server?
> > >
> > > Good question. My initial naive idea was to have an authenticator SPI
> > > for PAM and benefit from the work already done by Marek with LDAP and
> > > Kerberos. Plus, have a federation SPI to retrieve user's data from SSSD
> > > and propagate it to Keycloak.
> > >
> > > >
> > > > Also, where does the identity data come into play (aka LDAP info)?
> Is
> > > this
> > > > also a part of the PAM/SSSD flow?
> > >
> > > At the flow described here#17[2]:
> > >
> > > * User starts browser and connects to a resource
> > > * Resource redirects to Keycloak
> > > * User is presented with a login form
> > > * User fills username and password
> > > * User data is collected and passed to SSSD over D-Bus
> > > * SSSD authenticates against LDAP server
> > > * Authentication complete
> > > * Assertion/token is issued
> > > * User is redirected to the resource
> > >
> > > >
> > > > Bill
> > >
> > > [1] -
> > >
> https://docs.google.com/presentation/d/1-WvQTQ1M0Q9kfRl3d7FVWFn9GLL7vn8sAQmXGv0SVcs/edit#slide=id.g113bf6b186_1_130
> > > [2] -
> > >
> https://docs.google.com/presentation/d/1-WvQTQ1M0Q9kfRl3d7FVWFn9GLL7vn8sAQmXGv0SVcs/edit#slide=id.g113bf6b186_1_107
> > > --
> > >
> > > abstractj
> > > PGP: 0x84DC9914
> > > _______________________________________________
> > > keycloak-dev mailing list
> > > keycloak-dev at lists.jboss.org
> > > https://lists.jboss.org/mailman/listinfo/keycloak-dev
> > >
>
> --
>
> abstractj
> PGP: 0x84DC9914
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.jboss.org/pipermail/keycloak-dev/attachments/20160624/95077609/attachment.html 