[rules-users] How to activate/deactivate a rule.

Fri Sep 17 07:32:57 EDT 2010

Thank you so much...  earlier I tried with both as below for each rule
with different salience values... but it was generating 4 exception as I
mentioned in my last email.

1.

    agenda-group "init"

      auto-focus true

      no-loop true    

    salience 10 

      dialect 'java'

2.

      dialect 'java'

Now I am just using :

Rule 1

    salience 100

      dialect 'java'

Rule 2

    salience 50

      dialect 'java'

Rule 3

    salience -1

      dialect 'java'

This is working just fine.

Thanks a lot..

Ritesh

________________________________

From: Michael Anstis-2 [via Drools - Java Rules Engine]
[mailto:ml-node+1516613-244846131-167980 at n3.nabble.com] 
Sent: Friday, September 17, 2010 4:46 PM
To: Khot, Ritesh
Subject: Re: How to activate/deactivate a rule.

Am I correct in thinking you want to calculate the sum of groups of
ABC.C's differentiated by ABC.A?

An activation for the third rule is being created each time an ABC is
inserted into WM. First with one ABC, then with two and so fourth.

What you want is to ensure that "processing" for rules 1 and 2 complete
first and then rule 3 works on the results in WM. This can be achieved
with salience on the three rules; lower on rule 3 than 1 and 2 to ensure
it's activations execute after rules 1 and 2 are finished operating on
all facts.

2010/9/17 <[hidden email]>

Hi,

Thanks for the reply..

--The sequential option is set to false

--Using  StatelessKnowledgeSession

Summary what I intend to achieve,

1.	In first rule, I am doing calculation on three different columns
and putting it in sumOfThree property of ActualSum and inserting it in
WM. Let say I have four facts.
2.	In Second Rule, I am inserting distinct audit trail in
DistinctAT. Lets say I have two distinct AT.
3.	In Third Rule, I am assuming 4 Facts of ActualSum and 2 Facts of
DistinctAT already available in WM. Now I want to get sum of sumOfThree
group by AT, which I am trying to get using Accumulate function.

OutPut I am getting:

AT :1001

Done!

Done Main Rule, total :-40.0

AT :1000

Done!

Done Main Rule, total :210.0

AT :1000

Done Main Rule, total :160.0

AT :1000

Done Main Rule, total :260.0

INFO: Number of generated exceptions                       4

Here I see the last rule is getting fired every time ActualSum fact is
inserted in first rule. And as the facts are available one by one, these
are available to Accumulate function used in third Rule. Actually I am
expecting only two exceptions one for AT:1001 and AT:1000 with total of
-40 and 260 resp.

Please advise.

P.S.  Please ignore "$lfna_SEI and $r_SE".

Thanks,

Ritesh

________________________________

From: [hidden email] [mailto:[hidden email]] On Behalf Of Michael Anstis
Sent: Friday, September 17, 2010 12:43 PM
To: Rules Users List
Subject: Re: [rules-users] How to activate/deactivate a rule.

Have you tried running what you have?

I'd expect it to give the result you expect already (other than throwing
an error because $lfna_SEI and $r_SE are not bound in the last rule and
assuming chkRuleExpre is constant over time). Rules do not normally
execute in any sequential order (unless you explicitly make them so). As
the facts are inserted into WM they are matched against your rules and
activations scheduled. When all facts are inserted into WM and you call
fireAllRules the activations are played out and "truth maintenance"
ensures the "result" of their firing is consistent with the facts in WM
(either inserted by rules or the programmer). This is in essence "how
inference engines" work.

After you've called fireAllRules (and assuming you have a stateful
session) you insert more ABC's then you'd have to expect the last rule
to be re-evaluated - following another call to fireAllRules. So in part
when rule 3 ultimately gives the "correct" answer depends upon when you
stop inserting ABC's.

On 17 September 2010 07:35, Ritesh <[hidden email]> wrote:

Hi,

I have 3 rules in my drl file and want the last one should get fired
only
after all the facts in rule1 and rule2 gets inserted in working memory.
Please see below code for more understanding. Please suggest.

Thanks

declare DistinctAT
    d_auditT : String
end

declare ActualSum
    auditT : String
    sumOfThree : BigDecimal
end

rule "insert combined sum"
       dialect 'java'
when
   ABC( $a:A, $b:B, $c:C )

then
       BigDecimal actSum = $c.multiply(0.13);
       ActualSum $as = new ActualSum();
       $as.setAuditT($a);
       $as.setSumOfThree(actSum);
       insert($as);
       System.out.println("AT :" + $movAuditT);
end

rule "insert distinct AT"

       dialect 'java'
when
   $a : ActualSum( $AT : auditT )
       not DistinctAT( d_auditT == $AT )
then
       DistinctAT $disAT = new DistinctAT();
       $disAT.setD_auditT($AT);
       insert($disAT);
       System.out.println("Done!");
end

rule "Get Sum Group by AT"

       dialect 'java'
when

DistinctAT( $dAT: d_auditT )

$total : Double()
from accumulate( ActualSum( auditT == $dAT, $actSum_Main : sumOfThree ),
sum( $actSum_Main ) )

eval(
       chkRuleExpre( $total,$lfna_SEI,$r_SEI )
)

then
       System.out.println("Done Main Rule, total :" + $total);
end

--
View this message in context:
http://drools-java-rules-engine.46999.n3.nabble.com/How-to-activate-deac
tivate-a-rule-tp1516088p1516088.html
<http://drools-java-rules-engine.46999.n3.nabble.com/How-to-activate-dea
ctivate-a-rule-tp1516088p1516088.html?by-user=t> 
Sent from the Drools - User mailing list archive at Nabble.com.
_______________________________________________
rules-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/rules-users

_______________________________________________
rules-users mailing list
[hidden email]
https://lists.jboss.org/mailman/listinfo/rules-users

_______________________________________________ 
rules-users mailing list 
[hidden email] 
https://lists.jboss.org/mailman/listinfo/rules-users

________________________________

View message @
http://drools-java-rules-engine.46999.n3.nabble.com/How-to-activate-deac
tivate-a-rule-tp1516088p1516613.html 
To unsubscribe from How to activate/deactivate a rule., click here
<http://drools-java-rules-engine.46999.n3.nabble.com/template/TplServlet
.jtp?tpl=unsubscribe_by_code&node=1516088&code=cml0ZXNoLmtob3RAc3VuZ2FyZ
C5jb218MTUxNjA4OHwtMTczNTEzMDU2Mg==> . 

-- 
View this message in context: http://drools-java-rules-engine.46999.n3.nabble.com/How-to-activate-deactivate-a-rule-tp1516088p1516632.html
Sent from the Drools - User mailing list archive at Nabble.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.jboss.org/pipermail/rules-users/attachments/20100917/921929d8/attachment.html 