[seam-commits] Seam SVN: r7287 - branches/Seam_2_0/doc/reference/en/modules.
seam-commits at lists.jboss.org
seam-commits at lists.jboss.org
Tue Jan 29 10:35:53 EST 2008
Author: pete.muir at jboss.org
Date: 2008-01-29 10:35:53 -0500 (Tue, 29 Jan 2008)
New Revision: 7287
Modified:
branches/Seam_2_0/doc/reference/en/modules/websphere.xml
Log:
Some minor corrections (backport)
Modified: branches/Seam_2_0/doc/reference/en/modules/websphere.xml
===================================================================
--- branches/Seam_2_0/doc/reference/en/modules/websphere.xml 2008-01-29 15:26:43 UTC (rev 7286)
+++ branches/Seam_2_0/doc/reference/en/modules/websphere.xml 2008-01-29 15:35:53 UTC (rev 7287)
@@ -57,7 +57,7 @@
<title>Required custom properties</title>
<para>There are a couple of Websphere custom properties that are required
for Seam integration. These properties are not needed specifically
- for seam, but work around some issues with Websphere. These are
+ for Seam, but work around some issues with Websphere. These are
set following the instructions here : <ulink
url="http://www-1.ibm.com/support/docview.wss?rss=180&uid=swg21284395">
Setting web container custom properties</ulink></para>
@@ -147,7 +147,7 @@
change because this is not full <literal>jee5</literal>
implementation. </para>
<para> Websphere does not support <literal>Servlet
- 2.5</literal>, it required <literal>Servlet
+ 2.5</literal>, it requires <literal>Servlet
2.4</literal>. For this change we need to adjust the top of
the <literal>web.xml</literal> file to look like the
following:</para>
@@ -161,7 +161,7 @@
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
]]></programlisting>
- <para>Next you have to make some changes to the EJB references
+ <para>Next we have to make some changes to the EJB references
in the <literal>web.xml</literal>. These changes are
what will allow Websphere to bind the EJB2 references in
the web module to the the actual EJB3 beans in the EAR
@@ -220,12 +220,12 @@
<local-home></local-home>
<local>org.jboss.seam.transaction.LocalEjbSynchronizations</local>
</ejb-local-ref>]]></programlisting>
- <para>The important changes are that there is an empty
+ <para>The important change is that there is an empty
<literal>local-home</literal> element for each EJB.
- This is the signal to Websphere so that it will make the
- correct bindings behind the scenes between the web module
- and the EJB3 beans. The <literal>ejb-link</literal>
- element is simply not used. </para>
+ This tells Websphere to make the correct bindings between
+ the web module and the EJB3 beans. The
+ <literal>ejb-link</literal> element is simply not used.
+ </para>
</listitem>
</varlistentry>
<varlistentry>
@@ -235,13 +235,13 @@
<listitem>
<para>For this example we will be using the default
datasource that comes with Websphere. To do this change the
- <literal>jta-data-source</literal> element like below.</para>
+ <literal>jta-data-source</literal> element:</para>
<programlisting><![CDATA[
<jta-data-source>DefaultDatasource</jta-data-source>
]]></programlisting>
<para>Then we need to adjust some of the hibernate
properties. First comment out the Glassfish properties.
- Next you need to add/change the properties below. </para>
+ Next you need to add/change the properties:</para>
<programlisting><![CDATA[
@@ -257,7 +257,7 @@
<listitem>
<para>
<literal>hibernate.transaction.manager_lookup_class</literal>
- — Standard hibernate transaction
+ — Standard Hibernate transaction
manager property for Websphere 6.X</para>
</listitem>
<listitem>
@@ -270,10 +270,8 @@
EJBContext is looked up.
- <programlisting><![CDATA[
-com.ibm.wsspi.injectionengine.InjectionException:
- EJBContext may only be looked up by or injected into an EJB
- ]]></programlisting></para>
+ <programlisting><![CDATA[com.ibm.wsspi.injectionengine.InjectionException:
+ EJBContext may only be looked up by or injected into an EJB]]></programlisting></para>
</listitem>
<listitem>
<para><literal>hibernate.dialect</literal>
@@ -357,7 +355,7 @@
<listitem>
<para>Since Websphere is not a fully compliant
<literal>JEE5</literal> implementation we need to
- add these expression language libraries as well:
+ add these EL libraries:
<itemizedlist>
<listitem>
<para><literal>el-api.jar</literal>
@@ -378,12 +376,11 @@
the <literal>/lib</literal> of the EAR.</para>
</listitem>
<listitem>
- <para>Then finally by removing the
- <literal>log4j.jar</literal> all of the log output
- from our application will be added to the Websphere
- logging. Addition steps are required to fully
- configure log4j and those are outside of the scope of
- this document.</para>
+ <para>Finally we remove the <literal>log4j.jar</literal>
+ so that all of the log output from our application will
+ be added to the Websphere log. Additional steps are
+ required to fully configure log4j and those are outside
+ of the scope of this document.</para>
</listitem>
</itemizedlist> </para>
@@ -397,7 +394,7 @@
default fileset that is used to populate the
<literal>jboss-seam-jee5.jar</literal>. The primary change
is the addition of the
- <literal>GlassfishDerbyDialect.class</literal>.
+ <literal>GlassfishDerbyDialect.class</literal>:
<programlisting><![CDATA[
@@ -412,7 +409,7 @@
<para>Next we need to add the library dependencies discussed above.
For this add the following to bottom of the
- <literal>ear.lib.extras</literal> fileset entry.
+ <literal>ear.lib.extras</literal> fileset entry:
<programlisting><![CDATA[
@@ -426,7 +423,7 @@
</para>
<para>Now all that is left is to execute the <literal>ant
- archive</literal> task and your application files should be in
+ archive</literal> task and the built application will be in
the <literal>jee5/booking/dist</literal> directory.
</para>
</section>
@@ -437,8 +434,8 @@
<title>Deploying the application to Websphere</title>
<para>So now we have everything we need in place. All that is left is to
- deploy it - just a few steps more ;) </para>
- <para> For that we will use Websphere's administration console. As
+ deploy it - just a few steps more.</para>
+ <para> For this we will use Websphere's administration console. As
before there are some tricks and tips that must be followed.</para>
<para>The steps below are for the Websphere version stated above, yours
@@ -461,7 +458,7 @@
<para>At the top of the <literal>Enterprise
Application</literal> table select
<literal>Install</literal>. Below are installation
- wizard pages and what needs to done on each.
+ wizard pages and what needs to done on each:
<itemizedlist>
<listitem>
<para><literal>Preparing for the application
@@ -574,7 +571,7 @@
</listitem>
<listitem id="websphere-app-adj-after-install" xreflabel="installation adjustments for jee5 example">
<para>Now that we have our application installed we need to
- make some adjustments to it before we can start it.
+ make some adjustments to it before we can start it:
<itemizedlist>
<listitem>
<para>Starting from the <literal>Enterprise
@@ -593,7 +590,7 @@
</listitem>
<listitem>
<para>Change the <literal>Class loader
- order</literal> combo box to say
+ order</literal> combo box to
<literal>Classes loaded with application
class loader first</literal>.</para>
</listitem>
@@ -628,11 +625,11 @@
</listitem>
<listitem>
<para>You should verify that the change you just
- made has stuck. We had problems with the last
+ made has been remembered. We have had problems with the last
class loader change not taking effect - even
after a restart. If the change did not take you
- will need to do it manually following these
- directions
+ will need to do it manually, following these
+ directions:
<itemizedlist>
<listitem>
<para> Open the following file in a text
More information about the seam-commits
mailing list