[weld-dev] AfterBeanDiscovery and observer resolver cache
Jozef Hartinger
jharting at redhat.com
Thu Mar 6 05:24:20 EST 2014
Yes, I don't think Errai should depend on this behavior as it is not
even in the "undefined" category but rather in "implicitly not allowed"
or "not the intention of the spec" category.
Even from the Weld point of view we use two levels of caching and while
clearing the main one is easy, dealing with the second layer would
require adding further complexity just to support this corner case.
Therefore, I would suggest to use the other approach you proposed where
you register a general observer method and dispatch to the dynamically
added observers within there. It is always hard to guess performance
implications without doing measurements but as long as the general
observer method implementation is efficient, I would not worry about
that one additional method invocation much.
Jozef
On 03/06/2014 10:04 AM, Mark Struberg wrote:
> Hi Christian!
>
> While I find it nice that this works with OWB I also have to agree
> that this is not a guaranteed behaviour by the spec intention.
> What you could do in to hack around this issue is to have an
> @Observes at Any Object method which delivers the events with your own
> dynamic rules.
> But be prepared that this might slow down your app a bit.
>
> LieGrue,
> strub
>
>
>
> On Wednesday, 5 March 2014, 17:04, Christian Sadilek
> <csadilek at redhat.com> wrote:
>
> Hi,
>
> Yes, I expected this to not be an officially supported use case.
> So, I guess it's just a matter of improving the API
> design/documentation.
>
> However, dynamically registering an observer method would really
> be useful in the case of Errai where we set up an event bridge
> between the server and the client and potentially discover new
> observers at runtime.
>
> We could work around this by registering an observer method that
> observes all events and then handle the dispatching internally but
> that seems less efficient. Right now this works because
> OpenWebBeans doesn't cache the observers and allows invocations to
> AfterBeanDiscovery.addObserverMethod at runtime and because Weld
> has the functionality to clear the observer cache (although that's
> not public API).
>
> My questions is: Is there a good reason not to support this going
> forward? Can we add alternative functionality to add observer
> methods at runtime (not using ABD)?
>
> Cheers,
> Christian
>
> On 2014-03-05, at 4:37 AM, Martin Kouba <mkouba at redhat.com
> <mailto:mkouba at redhat.com>> wrote:
>
> > FYI I've informed CDI EG and it will be discussed on the next
> meeting
> > whether to clarify this already in CDI 1.2 MR...
> >
> > M
> >
> > Dne 5.3.2014 10:19, Jozef Hartinger napsal(a):
> >> Agreed. It is definitely not the intention of the specification
> to allow
> >> beans/observers/contexts to be added at runtime and
> applications should
> >> not have any expectations of what these methods do when invoked
> outside
> >> of the AfterBeanDiscovery observer.
> >>
> >> We'll add stricter validation to Weld to disallow this.
> >>
> >> On 03/05/2014 08:53 AM, Martin Kouba wrote:
> >>> Hi Christian,this
> >>>
> >>> actually invoking any container lifecycle event method after the
> >>> container initialization finished should have no effect. ABD event
> >>> reference can escape but it does not mean you can invoke
> ABD.addBean()
> >>> after ADV is fired.
> >>>
> >>> The spec wording is not very explicit here:
> >>> "During the application initialization process, the container
> fires a
> >>> series of events, allowing portable extensions to integrate with
> >>> the container initialization process defined in Section 12.2."
> >>>
> >>> Maybe we should file a new spec issue to clarify that such
> invocations
> >>> should result in IllegalStateException...
> >>>
> >>> Martin
> >>>
> >>>
> >>> Dne 4.3.2014 17:42, Christian Sadilek napsal(a):
> >>>> Hi Jozef,
> >>>>
> >>>> I think clearing the cache at the end of the Weld bootstrap
> process is not enough to solve that particular problem since a CDI
> extension can hold on to the ABD reference and invoke
> addObserverMethod later (multiple times) which causes the same
> problem I described below. There's no indication to the caller of
> addObserverMethod that it's in fact too late to call that method.
> >>>>
> >>>> Since an ABD event reference can always escape (can be used
> outside the method that observes it) it seems this issue should be
> resolved (although it admittedly is an edge case).
> >>>>
> >>>> Cheers,
> >>>> Christian
> >>>>
> >>>> On 2014-03-04, at 11:29 AM, Jozef Hartinger
> <jharting at redhat.com <mailto:jharting at redhat.com>> wrote:
> >>>>
> >>>>> Hi Christian,
> >>>>>
> >>>>> this sounds like a bug. All the resolution caches should be
> cleared at the very end of Weld's bootstrap sequence (after ABD
> observers are called). (see
> https://github.com/weld/core/blob/master/impl/src/main/java/org/jboss/weld/bootstrap/WeldStartup.java#L415)
> >>>>>
> >>>>> Jozef
> >>>>>
> >>>>> On 03/04/2014 04:36 PM, Christian Sadilek wrote:
> >>>>>> Hi everyone,
> >>>>>>
> >>>>>> CDI extensions can observe the AfterBeanDiscovery event to
> register observer methods (addObserverMethod). However, when an
> event is first fired, the observers for that event are resolved
> and then cached (in TypeSafeResolver). All future calls to
> addObserverMethod for an already fired event with corresponding
> qualifiers will have no effect because the observer result is read
> from cache and not recomputed.
> >>>>>>
> >>>>>>> From an API perspective that's unfortunate because
> addObserverMethod will only work until an event (with
> corresponding qualifiers) is fired and there is no indication to
> the caller of that method that it didn't have any effect when
> invoked after that.
> >>>>>>
> >>>>>> Possible solutions:
> >>>>>>
> >>>>>> - Provide some public API to clear/recompute that part the
> observer cache. Maybe that exists? I couldn't find it which is why
> I am using the private API and Reflection :(. Also let
> AfterBeanDiscovery.addObserverMethod fail in that case with the
> advice to reset the cache.
> >>>>>>
> >>>>>> - Recompute the corresponding part of the cache when
> addObserverMethod is called (seems preferable).
> >>>>>>
> >>>>>> OpenWebBeans doesn't have this issue as their
> NotificationManager will simply add the new ObserverMethod to a
> ConcurrentHashMap that is also accessed when an event is fired.
> >>>>>>
> >>>>>> What do you think? Can this already be done or is there
> another solution?
> >>>>>>
> >>>>>> Cheers,
> >>>>>> Christian
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> weld-dev mailing list
> >>>>>> weld-dev at lists.jboss.org <mailto:weld-dev at lists.jboss.org>
> >>>>>> https://lists.jboss.org/mailman/listinfo/weld-dev
> >>>>
> >>>> _______________________________________________
> >>>> weld-dev mailing list
> >>>> weld-dev at lists.jboss.org <mailto:weld-dev at lists.jboss.org>
> >>>> https://lists.jboss.org/mailman/listinfo/weld-dev
> >>>>
> >>
>
>
> _______________________________________________
> weld-dev mailing list
> weld-dev at lists.jboss.org <mailto:weld-dev at lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/weld-dev
>
>
>
>
> _______________________________________________
> weld-dev mailing list
> weld-dev at lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/weld-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.jboss.org/pipermail/weld-dev/attachments/20140306/902f4f55/attachment.html
More information about the weld-dev
mailing list