Which version should I support? (Re: [jbosstools-dev] Re: How to use JBPm Converter)
grid.qian
fqian at redhat.com
Mon Dec 8 00:37:53 EST 2008
> Grid,
>
> Not sure what you mean when you say based on Ganymeade. All of the testing I have been doing is based on Ganymede:
>
> eclipse-jee-ganymede-SR1-linux-gtk.
>
> Which different version of STP are you using?
>
Ganymeade itself include STP modeler. Based this STP modeler, JBIDE-3364 does not occur.
But after update to stp.archivedsite-2.0.0.M3.zip, the JBIDE-3364 occurs.
> Jeff
>
>
> ----- Original Message -----
> From: "grid.qian" <fqian at redhat.com>
> To: "Jeffrey Delong" <jdelong at redhat.com>
> Cc: jbosstools-dev at lists.jboss.org
> Sent: Sunday, December 7, 2008 10:24:16 PM GMT -07:00 US/Canada Mountain
> Subject: Re: Which version should I support? (Re: [jbosstools-dev] Re: How to use JBPm Converter)
>
>
>
>>> http://download.eclipse.org/stp/downloads/
>>>
>>>
>
> From this link page, the Ganymede is stable.
> stp.archivedsite-2.0.0.M3.zip is committer build.
>
>
>> O, my god!
>> Jeff, you are right. Based on your stp.archivedsite-2.0.0.M3.zip, I
>> get the issue.
>> But based on Ganymede, this issue does not occur.
>> The stp modeler is too distable!
>>
>> Which version should I support? or both?
>> Any suggestion are appreciated.
>>
>> Grid
>>
>>
>>> ----- Original Message -----
>>> From: "grid.qian" <fqian at redhat.com>
>>> To: "Jeffrey Delong" <jdelong at redhat.com>
>>> Cc: jbosstools-dev at lists.jboss.org, "John Graham" <jgraham at redhat.com>
>>> Sent: Sunday, December 7, 2008 9:45:06 PM GMT -07:00 US/Canada Mountain
>>> Subject: Re: [jbosstools-dev] Re: How to use JBPm Converter
>>>
>>>
>>>
>>>
>>>> Grid,
>>>>
>>>> As I stated below, I am using the SOA Tools BPMN Editor.
>>>>
>>>>
>>>>
>>>>>>> Now I have installed:
>>>>>>>
>>>>>>> eclipse-jee-ganymede-SR1-linux-gtk
>>>>>>> JBossTools-3.0.0.CR1-N200812050815-ALL-linux-gtk
>>>>>>> and the SOA Tools BPMN Modeler from stp.archivedsite-2.0.0.M3.zip
>>>>>>>
>>>>>>>
>>>> It is true that my models were generated from PI4SOA CDL models.
>>>> However I created a very simple model directly in SOA Tools BPMN
>>>> Modeler and I experience the same issue when trying to convert it to
>>>> JPDL (attached those files). Also, not sure what you mean by
>>>> "sequenceflow". I don't see sequenceflow in any .bpmn or .bpmn_diagram.
>>>>
>>>>
>>> O, "sequenceflow" is a name from bpmn specification. In *.bpmn, it
>>> 's name is "sequenceEdges". In stp bpmn editor, it's name is Flow
>>> Connector.
>>> I am running stp bpmn editor by debugging stp bpmn editor sources. So
>>> maybe some differences?
>>> Where do you get the stp.archivedsite-2.0.0.M3.zip? Please give me a
>>> link.Thanks.
>>>
>>>
>>>
>>>> Jeff
>>>>
>>>>
>>>> ----- Original Message -----
>>>> From: "grid.qian" <fqian at redhat.com>
>>>> To: "John Graham" <jgraham at redhat.com>
>>>> Cc: "Jeffrey Delong" <jdelong at redhat.com>,
>>>> jbosstools-dev at lists.jboss.org
>>>> Sent: Sunday, December 7, 2008 8:14:43 PM GMT -07:00 US/Canada Mountain
>>>> Subject: Re: [jbosstools-dev] Re: How to use JBPm Converter
>>>>
>>>> Hi Jeff,
>>>> I have known the reason of the issue JBIDE-3364.
>>>> I think your bpmn files are not from STP BPMN EDITOR?
>>>> STP bpmn editor bpmn file: *.bpmn, it's sequenceflow has a attribute:
>>>> source. The source is the sequenceflow's source node. But your bpmn
>>>> files has not this attribute. So this issue occurs.
>>>>
>>>> John,
>>>> We need to support these files from other editor?
>>>> If yes, I need to do some works for it.
>>>> If not, I have a workaround:
>>>> Open the bpmn file using stp bpmn editor, do some changes
>>>> (not real changes, only aim to call stp editor's save method)
>>>> Then save the file. At this time, the stp editor add the source
>>>> attribute
>>>> to the sequenceflow automatically, you may use the bpmn export
>>>> correctly
>>>>
>>>> Grid
>>>>
>>>>
>>>>
>>>>
>>>>>> I tried again with another BPMN model that had multiple pools. When I
>>>>>> uncheck a pool in the wizard, it throws an NPE. Should this be
>>>>>> described in another JIRA issue
>>>>>>
>>>>>>
>>>>> Yes, please.
>>>>>
>>>>> -- John
>>>>>
>>>>> On Fri, 2008-12-05 at 14:22 -0500, Jeffrey Delong wrote:
>>>>>
>>>>>
>>>>>> Jon,
>>>>>>
>>>>>> I attached the files. Grid did not report the file worked
>>>>>> correctly for him, he just reported that the zip file from the
>>>>>> download site that I sent him installed correctly in his environment.
>>>>>>
>>>>>> I tried again with another BPMN model that had multiple pools.
>>>>>> When I uncheck a pool in the wizard, it throws an NPE. Should this
>>>>>> be described in another JIRA issue?
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Jeff
>>>>>>
>>>>>> ----- Original Message -----
>>>>>> From: "John Graham" <jgraham at redhat.com>
>>>>>> To: "Jeffrey Delong" <jdelong at redhat.com>
>>>>>> Cc: jbosstools-dev at lists.jboss.org, "feng.qian" <fqian at redhat.com>
>>>>>> Sent: Friday, December 5, 2008 12:09:45 PM GMT -07:00 US/Canada
>>>>>> Mountain
>>>>>> Subject: Re: [jbosstools-dev] Re: How to use JBPm Converter
>>>>>>
>>>>>> Jeff,
>>>>>>
>>>>>> I've created:
>>>>>>
>>>>>> https://jira.jboss.org/jira/browse/JBIDE-3364
>>>>>>
>>>>>> to track this. Can you please attach the BPMN file in question to
>>>>>> that
>>>>>> JIRA, so Grid can look into it (not sure if this is the same file as
>>>>>> originally discussed on this thread, since Grid reported that file
>>>>>> worked correctly for him.)
>>>>>>
>>>>>> Grid: Please take a look into this.
>>>>>>
>>>>>> -- John
>>>>>>
>>>>>> On Fri, 2008-12-05 at 13:26 -0500, Jeffrey Delong wrote:
>>>>>>
>>>>>>
>>>>>>> Now I have installed:
>>>>>>>
>>>>>>> eclipse-jee-ganymede-SR1-linux-gtk
>>>>>>> JBossTools-3.0.0.CR1-N200812050815-ALL-linux-gtk
>>>>>>> and the SOA Tools BPMN Modeler from stp.archivedsite-2.0.0.M3.zip
>>>>>>>
>>>>>>> The BPMN Converter is installed, and I see it when I use Export
>>>>>>> from the Context Menu. However when I get to the step in the
>>>>>>> wizard that has me select the pool, I select the only pool in my
>>>>>>> BPMN diagram (I had hand removed the other pools prior to start
>>>>>>> with a simple example), and it hangs when I select next, and I
>>>>>>> have to cancel. My BPMN model was generated from the pi4soa CDL
>>>>>>> tool.
>>>>>>>
>>>>>>>
>>>>>>> Jeff
>>>>>>>
>>>>>>>
>>>>>>> ----- Original Message -----
>>>>>>> From: "John Graham" <jgraham at redhat.com>
>>>>>>> To: "Jeffrey Delong" <jdelong at redhat.com>
>>>>>>> Cc: jbosstools-dev at lists.jboss.org, "feng.qian" <fqian at redhat.com>
>>>>>>> Sent: Friday, December 5, 2008 10:20:54 AM GMT -07:00 US/Canada
>>>>>>> Mountain
>>>>>>> Subject: Re: [jbosstools-dev] Re: How to use JBPm Converter
>>>>>>>
>>>>>>> Jeff,
>>>>>>>
>>>>>>> I suspect that Grid created this zip from his own environment,
>>>>>>> since I'm
>>>>>>> not aware of any regularly produced zips in this area.
>>>>>>>
>>>>>>> The requirement you mention about using SOA-P tooling only from
>>>>>>> JBT has
>>>>>>> been the subject of debate before, with one serious limiting factor
>>>>>>> being the JBT build. As Nick B moves the JBT to a modular system,
>>>>>>> then I
>>>>>>> think these sorts of subsets become possible. Ultimately, it
>>>>>>> would be
>>>>>>> Max's call.
>>>>>>>
>>>>>>> -- John
>>>>>>>
>>>>>>> On Fri, 2008-12-05 at 12:15 -0500, Jeffrey Delong wrote:
>>>>>>>
>>>>>>>
>>>>>>>> Jon,
>>>>>>>>
>>>>>>>> A lot of times we don't want the entire JBoss Tools, but just
>>>>>>>> the plugins that we intend to use. In particular doing soa
>>>>>>>> development work I have no interest in or use for seam, rich
>>>>>>>> faces, jbossas tooling. So until there is a version of JBoss
>>>>>>>> Tools targeted at the SOA developer, I would prefer to add the
>>>>>>>> plugins I require. Grid mentioned a common zip, but the one he
>>>>>>>> passed me was old. I don't see a tools common zip on the
>>>>>>>> download page. How would I find this?
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>>
>>>>>>>> Jeff
>>>>>>>>
>>>>>>>>
>>>>>>>> ----- Original Message -----
>>>>>>>> From: "John Graham" <jgraham at redhat.com>
>>>>>>>> To: "feng.qian" <fqian at redhat.com>
>>>>>>>> Cc: "Jeffrey Delong" <jdelong at redhat.com>,
>>>>>>>> jbosstools-dev at lists.jboss.org
>>>>>>>> Sent: Friday, December 5, 2008 8:59:26 AM GMT -07:00 US/Canada
>>>>>>>> Mountain
>>>>>>>> Subject: Re: [jbosstools-dev] Re: How to use JBPm Converter
>>>>>>>>
>>>>>>>> On the surface (just scanning the thread below):
>>>>>>>>
>>>>>>>> Jeff: Having the plug-in and feature in the right directories is
>>>>>>>> the
>>>>>>>> first step, but that does not necessarily mean that the Eclipse
>>>>>>>> platform
>>>>>>>> will load them (dependencies could be missing). If you don't see a
>>>>>>>> "BPMN" category under Export, then it is likely due to missing
>>>>>>>> dependencies. I would suggest the latest Eclipse Gaynmede J2EE
>>>>>>>> package
>>>>>>>> and latest JBT CR1 build to ensure everything is in place.
>>>>>>>>
>>>>>>>> -- John
>>>>>>>>
>>>>>>>> On Fri, 2008-12-05 at 13:27 +0800, feng.qian wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>> Hi Jeffrey,
>>>>>>>>>
>>>>>>>>> I have tested your zip file. No problems.
>>>>>>>>> Please go to the eclipse menu Help->About Eclipse
>>>>>>>>> Platform->Plug-in Details and see
>>>>>>>>> if the plugin is correctly installed.
>>>>>>>>>
>>>>>>>>> Grid
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> Grid,
>>>>>>>>>>
>>>>>>>>>> Downloaded from:
>>>>>>>>>>
>>>>>>>>>> http://www.jboss.org/tools/download/
>>>>>>>>>>
>>>>>>>>>> I have verified that both the feature and the plugin are in
>>>>>>>>>> the appropriate directory:
>>>>>>>>>>
>>>>>>>>>> I have attached the zip file.
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>>
>>>>>>>>>> Jeff
>>>>>>>>>>
>>>>>>>>>> ----- Original Message -----
>>>>>>>>>> From: "feng.qian" <fqian at redhat.com>
>>>>>>>>>> To: "Jeffrey Delong" <jdelong at redhat.com>
>>>>>>>>>> Sent: Thursday, December 4, 2008 9:39:16 PM GMT -07:00
>>>>>>>>>> US/Canada Mountain
>>>>>>>>>> Subject: Re: How to use JBPm Converter
>>>>>>>>>>
>>>>>>>>>> Jeffrey Delong wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> Grid,
>>>>>>>>>>>
>>>>>>>>>>> This is not working for me. I do not see the BPMN Folder.
>>>>>>>>>>>
>>>>>>>>>>> I unzipped jBPM-Convert-1.0.0.Beta1-R200810311334.zip into
>>>>>>>>>>> eclipse folder.
>>>>>>>>>>>
>>>>>>>>>>> FYI I have installed:
>>>>>>>>>>>
>>>>>>>>>>> pi4soa2.0.0.CR4-eclipse3.4-linux.tar.gz
>>>>>>>>>>> jbpm 3.1.5 via the local update site
>>>>>>>>>>> (jbpm-jpdl-designer-site-3.1.5.zip)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>> jBPM-Convert-1.0.0.Beta1-R200810311334.zip?
>>>>>>>>>> Where do you get it? I have never seen this zip. But I think
>>>>>>>>>> it maybe:
>>>>>>>>>> The zip should include a feature named
>>>>>>>>>> org.jboss.tools.jbpm.convert.feature and a plugin named
>>>>>>>>>> org.jboss.tools.jbpm.convert.
>>>>>>>>>> You should put the plugin into eclipse/plugins and the feature
>>>>>>>>>> into eclipse/features.
>>>>>>>>>> If not working, please send the zip to me.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> eclipse stp bpmn modeler from local update site
>>>>>>>>>>> (stp.archivedsite-2.0.0.M3.zip)
>>>>>>>>>>>
>>>>>>>>>>> This is my "process designer" workbench :)
>>>>>>>>>>>
>>>>>>>>>>> Jeff
>>>>>>>>>>>
>>>>>>>>>>> ----- Original Message -----
>>>>>>>>>>> From: "feng.qian" <fqian at redhat.com>
>>>>>>>>>>> To: "Jeffrey Delong" <jdelong at redhat.com>
>>>>>>>>>>> Sent: Thursday, December 4, 2008 6:54:33 PM GMT -07:00
>>>>>>>>>>> US/Canada Mountain
>>>>>>>>>>> Subject: Re: How to use JBPm Converter
>>>>>>>>>>>
>>>>>>>>>>> Hi Jeffrey,
>>>>>>>>>>> This is my carelessness. I forgot to tell you the changes
>>>>>>>>>>> about jbpm convert. As John's suggestion, I removed the popup
>>>>>>>>>>> menu of jbpm convert and added a export wizard.
>>>>>>>>>>> You may:
>>>>>>>>>>> 1. Choose a *.bpmn file ,and right click on it.
>>>>>>>>>>> 2. The popup menu is opened.
>>>>>>>>>>> 3. You click on Export... action.
>>>>>>>>>>> 4. A wizard for export open.
>>>>>>>>>>> 5. In this wizard, there is a folder named BPMN Export,
>>>>>>>>>>> click it to expand it and click BPMN -> JPDL menu.
>>>>>>>>>>> 6. A wizard for jbpm converter open.
>>>>>>>>>>> This wizard looks like that before. I think you are able to
>>>>>>>>>>> use it.
>>>>>>>>>>> Any questions, please let me know.
>>>>>>>>>>> (Before you use jbpm convert, you must have two file in a
>>>>>>>>>>> folder: *.bpmn and *.bpmn_diagram)
>>>>>>>>>>>
>>>>>>>>>>> Cheers
>>>>>>>>>>> Grid
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> Hi Grid,
>>>>>>>>>>>>
>>>>>>>>>>>> I installed the JBPM Converter into my Eclipse 3.4
>>>>>>>>>>>> installation (Linux). Next time I started it Eclipse it came
>>>>>>>>>>>> up shrunken in the top left corner of my display.
>>>>>>>>>>>>
>>>>>>>>>>>> I have a BPMN diagram (that I generated from a PI4SOA cdm
>>>>>>>>>>>> file) and want to try to convert it to jBPM. Not sure what
>>>>>>>>>>>> is the right way to do that.
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>
>>>>>>>>>>>> Jeff
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> jbosstools-dev mailing list
>>>>>>>>> jbosstools-dev at lists.jboss.org
>>>>>>>>> https://lists.jboss.org/mailman/listinfo/jbosstools-dev
>>>>>>>>>
>>>>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>> _______________________________________________
>> jbosstools-dev mailing list
>> jbosstools-dev at lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/jbosstools-dev
>>
>
>
More information about the jbosstools-dev
mailing list