About exo.conf.dir and exo.conf.dir.name <http://exo.conf.dir.name>;, the answer is no. About gatein.conf.dir, I have no idea since it sounds like gatein specific but I guess that the answer should be yes On Tue, Sep 18, 2012 at 9:39 AM, Thomas Heute <theute(a)redhat.com <mailto:theute@redhat.com>> wrote: Nicolas, can we specify exo.conf.dir, exo.conf.dir.name <http://exo.conf.dir.name>;, gatein.conf.dir in a property file rather than command line ? Thomas. -------- Original Message -------- Subject: [gatein-dev] Starting AS7 package with no parameter Date: Tue, 11 Sep 2012 10:47:51 +0200 From: Thomas Heute <theute(a)redhat.com <mailto:theute@redhat.com>> To: gatein-dev <gatein-dev(a)lists.jboss.org <mailto:gatein-dev@lists.jboss.org>> At the moment starting GateIn with AS7 package requires to add 3 parameters: -Dexo.conf.dir=$JBOSS_HOME/standalone/configuration/gatein -Dexo.conf.dir.name <http://Dexo.conf.dir.name>=gatein" -Dgatein.conf.dir=\\\${jboss.server.config.dir}/gatein While in most cases they would not change. This is an issue for tools like Eclipse as well since they 'bypass' standalone.conf Do we have a way to make those, good defaults depending on the app server ? Or to have those written in a configuration/property file so that it doesn't require any command line parameter ? Also do we have good documentation about those 3 properties ? Thanks Thomas. _______________________________________________ gatein-dev mailing list gatein-dev(a)lists.jboss.org <mailto:gatein-dev@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/gatein-dev

Could the GateIn AS7 subsystem check whether or not these system properties are already set, and if not set them to default values before starting GateIn? ----- Original Message ----- > From: "Thomas Heute" <theute(a)redhat.com&gt; > To: "Nicolas Filotto" <nicolas.filotto(a)exoplatform.com&gt; > Cc: "gatein-dev" <gatein-dev(a)lists.jboss.org&gt; > Sent: Wednesday, 19 September, 2012 8:02:53 AM > Subject: Re: [gatein-dev] Starting AS7 package with no parameter > > > Could this be added or could the default be good if AS7 is detected > since we know the location in advance ? > > On 09/18/2012 12:05 PM, Nicolas Filotto wrote: >> About exo.conf.dir and exo.conf.dir.name >> <http://exo.conf.dir.name>;, >> the answer is no. About gatein.conf.dir, I have no idea since it >> sounds like gatein specific but I guess that the answer should be >> yes >> >> On Tue, Sep 18, 2012 at 9:39 AM, Thomas Heute <theute(a)redhat.com >> <mailto:theute@redhat.com>> wrote: >> >> >> Nicolas, can we specify exo.conf.dir, exo.conf.dir.name >> <http://exo.conf.dir.name>;, gatein.conf.dir in a property file >> rather than command line ? >> >> Thomas. >> >> >> -------- Original Message -------- >> Subject: [gatein-dev] Starting AS7 package with no parameter >> Date: Tue, 11 Sep 2012 10:47:51 +0200 >> From: Thomas Heute <theute(a)redhat.com >> <mailto:theute@redhat.com>> >> To: gatein-dev <gatein-dev(a)lists.jboss.org >> <mailto:gatein-dev@lists.jboss.org>> >> >> >> >> >> At the moment starting GateIn with AS7 package requires to add >> 3 >> parameters: >> -Dexo.conf.dir=$JBOSS_HOME/standalone/configuration/gatein >> -Dexo.conf.dir.name <http://Dexo.conf.dir.name>=gatein" >> -Dgatein.conf.dir=\\\${jboss.server.config.dir}/gatein >> >> While in most cases they would not change. >> >> This is an issue for tools like Eclipse as well since they >> 'bypass' >> standalone.conf >> >> Do we have a way to make those, good defaults depending on the >> app >> server ? Or to have those written in a configuration/property >> file so >> that it doesn't require any command line parameter ? >> >> Also do we have good documentation about those 3 properties ? >> >> Thanks >> Thomas. >> >> _______________________________________________ >> gatein-dev mailing list >> gatein-dev(a)lists.jboss.org <mailto:gatein-dev@lists.jboss.org> >> https://lists.jboss.org/mailman/listinfo/gatein-dev >> >> >> > _______________________________________________ > gatein-dev mailing list > gatein-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/gatein-dev >

Could the GateIn AS7 subsystem check whether or not these system properties are already set, and if not set them to default values before starting GateIn? ----- Original Message ----- > From: "Thomas Heute" <theute(a)redhat.com&gt; > To: "Nicolas Filotto" <nicolas.filotto(a)exoplatform.com&gt; > Cc: "gatein-dev" <gatein-dev(a)lists.jboss.org&gt; > Sent: Wednesday, 19 September, 2012 8:02:53 AM > Subject: Re: [gatein-dev] Starting AS7 package with no parameter > > > Could this be added or could the default be good if AS7 is detected > since we know the location in advance ? > > On 09/18/2012 12:05 PM, Nicolas Filotto wrote: > > About exo.conf.dir and exo.conf.dir.name > > <http://exo.conf.dir.name>;, > > the answer is no. About gatein.conf.dir, I have no idea since it > > sounds like gatein specific but I guess that the answer should be > > yes > > > > On Tue, Sep 18, 2012 at 9:39 AM, Thomas Heute <theute(a)redhat.com > > <mailto:theute@redhat.com>> wrote: > > > > > > Nicolas, can we specify exo.conf.dir, exo.conf.dir.name > > <http://exo.conf.dir.name>;, gatein.conf.dir in a property file > > rather than command line ? > > > > Thomas. > > > > > > -------- Original Message -------- > > Subject: [gatein-dev] Starting AS7 package with no parameter > > Date: Tue, 11 Sep 2012 10:47:51 +0200 > > From: Thomas Heute <theute(a)redhat.com > > <mailto:theute@redhat.com>> > > To: gatein-dev <gatein-dev(a)lists.jboss.org > > <mailto:gatein-dev@lists.jboss.org>> > > > > > > > > > > At the moment starting GateIn with AS7 package requires to add > > 3 > > parameters: > > -Dexo.conf.dir=$JBOSS_HOME/standalone/configuration/gatein > > -Dexo.conf.dir.name <http://Dexo.conf.dir.name>=gatein" > > -Dgatein.conf.dir=\\\${jboss.server.config.dir}/gatein > > > > While in most cases they would not change. > > > > This is an issue for tools like Eclipse as well since they > > 'bypass' > > standalone.conf > > > > Do we have a way to make those, good defaults depending on the > > app > > server ? Or to have those written in a configuration/property > > file so > > that it doesn't require any command line parameter ? > > > > Also do we have good documentation about those 3 properties ? > > > > Thanks > > Thomas. > > > > _______________________________________________ > > gatein-dev mailing list > > gatein-dev(a)lists.jboss.org <mailto:gatein-dev@lists.jboss.org> > > https://lists.jboss.org/mailman/listinfo/gatein-dev > > > > > > > > _______________________________________________ > gatein-dev mailing list > gatein-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/gatein-dev > _______________________________________________ gatein-dev mailing list gatein-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/gatein-dev

Just managed to get GateIn (upstream master) running with 7.1.2.Final from Eclipse. Haven't tried on 7.1.0+7.1.1, let me know if you want me to. The following needs to be added to standalone.xml (and removed from standalone.conf): <server xmlns="urn:jboss:domain:1.3"> ... <system-properties> <property name="exo.conf.dir" value="${jboss.server.config.dir}/gatein"/> <property name="exo.conf.dir.name" value="gatein"/> <property name="gatein.conf.dir" value="${jboss.server.config.dir}/gatein"/> </system-properties> And I copied all modules from 'gatein/modules' to 'modules'. Marko: I assume your branch has already done this?

Stian ----- Original Message ----- > From: "Marko Strukelj" <marko.strukelj(a)gmail.com&gt; > To: "Stian Thorgersen" <stian(a)redhat.com&gt; > Cc: "Thomas Heute" <theute(a)redhat.com&gt;, "gatein-dev" <gatein-dev(a)lists.jboss.org&gt; > Sent: Wednesday, 19 September, 2012 11:08:24 AM > Subject: Re: [gatein-dev] Starting AS7 package with no parameter > > We can try that yes. Subsystem is activated before any GateIn init or > JCR init occurs so that should be doable. > > > > On Wed, Sep 19, 2012 at 10:18 AM, Stian Thorgersen < stian(a)redhat.com >> wrote: > > Could the GateIn AS7 subsystem check whether or not these system > properties are already set, and if not set them to default values > before starting GateIn? > > > ----- Original Message ----- >> From: "Thomas Heute" < theute(a)redhat.com > > >> To: "Nicolas Filotto" < nicolas.filotto(a)exoplatform.com > >> Cc: "gatein-dev" < gatein-dev(a)lists.jboss.org > >> Sent: Wednesday, 19 September, 2012 8:02:53 AM >> Subject: Re: [gatein-dev] Starting AS7 package with no parameter >> >> >> Could this be added or could the default be good if AS7 is detected >> since we know the location in advance ? >> >> On 09/18/2012 12:05 PM, Nicolas Filotto wrote: >>> About exo.conf.dir and exo.conf.dir.name >>> < http://exo.conf.dir.name >, >>> the answer is no. About gatein.conf.dir, I have no idea since it >>> sounds like gatein specific but I guess that the answer should be >>> yes >>> >>> On Tue, Sep 18, 2012 at 9:39 AM, Thomas Heute < theute(a)redhat.com >>> <mailto: theute(a)redhat.com >> wrote: >>> >>> >>> Nicolas, can we specify exo.conf.dir, exo.conf.dir.name >>> < http://exo.conf.dir.name >, gatein.conf.dir in a property file >>> rather than command line ? >>> >>> Thomas. >>> >>> >>> -------- Original Message -------- >>> Subject: [gatein-dev] Starting AS7 package with no parameter >>> Date: Tue, 11 Sep 2012 10:47:51 +0200 >>> From: Thomas Heute < theute(a)redhat.com >>> <mailto: theute(a)redhat.com >> >>> To: gatein-dev < gatein-dev(a)lists.jboss.org >>> <mailto: gatein-dev(a)lists.jboss.org >> >>> >>> >>> >>> >>> At the moment starting GateIn with AS7 package requires to add >>> 3 >>> parameters: >>> -Dexo.conf.dir=$JBOSS_HOME/standalone/configuration/gatein >>> - Dexo.conf.dir.name < http://Dexo.conf.dir.name >=gatein" >>> -Dgatein.conf.dir=\\\${jboss.server.config.dir}/gatein >>> >>> While in most cases they would not change. >>> >>> This is an issue for tools like Eclipse as well since they >>> 'bypass' >>> standalone.conf >>> >>> Do we have a way to make those, good defaults depending on the >>> app >>> server ? Or to have those written in a configuration/property >>> file so >>> that it doesn't require any command line parameter ? >>> >>> Also do we have good documentation about those 3 properties ? >>> >>> Thanks >>> Thomas. >>> >>> _______________________________________________ >>> gatein-dev mailing list >>> gatein-dev(a)lists.jboss.org <mailto: gatein-dev(a)lists.jboss.org > >>> https://lists.jboss.org/mailman/listinfo/gatein-dev >>> >>> >>> >> _______________________________________________ >> gatein-dev mailing list >> gatein-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/gatein-dev >> > _______________________________________________ > gatein-dev mailing list > gatein-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/gatein-dev > >

On 09/19/2012 12:51 PM, Stian Thorgersen wrote: > Just managed to get GateIn (upstream master) running with 7.1.2.Final > from Eclipse. Haven't tried on 7.1.0+7.1.1, let me know if you want me to. > > The following needs to be added to standalone.xml (and removed from > standalone.conf): > > <server xmlns="urn:jboss:domain:1.3"> > ... > <system-properties> > <property name="exo.conf.dir" value="${jboss.server.config.** > dir}/gatein"/> > <property name="exo.conf.dir.name" value="gatein"/> > <property name="gatein.conf.dir" value="${jboss.server.config.** > dir}/gatein"/> > </system-properties> > > And I copied all modules from 'gatein/modules' to 'modules'. Marko: I > assume your branch has already done this? > So that you don't have to add the -mp parameter right ? Great news, we can assume it will work fine with 7.1.0 and 7.1.1 or it will be easy to spot that it doesn't. Thomas > Stian > > ----- Original Message ----- > >> From: "Marko Strukelj" <marko.strukelj(a)gmail.com&gt; >> To: "Stian Thorgersen" <stian(a)redhat.com&gt; >> Cc: "Thomas Heute" <theute(a)redhat.com&gt;, "gatein-dev" < >> gatein-dev(a)lists.jboss.org&gt; >> Sent: Wednesday, 19 September, 2012 11:08:24 AM >> Subject: Re: [gatein-dev] Starting AS7 package with no parameter >> >> We can try that yes. Subsystem is activated before any GateIn init or >> JCR init occurs so that should be doable. >> >> >> >> On Wed, Sep 19, 2012 at 10:18 AM, Stian Thorgersen < stian(a)redhat.com >> >>> wrote: >>> >> >> Could the GateIn AS7 subsystem check whether or not these system >> properties are already set, and if not set them to default values >> before starting GateIn? >> >> >> ----- Original Message ----- >> >>> From: "Thomas Heute" < theute(a)redhat.com > >>> >> >> To: "Nicolas Filotto" < nicolas.filotto@exoplatform.**com&lt;nicolas.filotto(a)exoplatform.com&gt;&gt; >>> Cc: "gatein-dev" < gatein-dev(a)lists.jboss.org > >>> Sent: Wednesday, 19 September, 2012 8:02:53 AM >>> Subject: Re: [gatein-dev] Starting AS7 package with no parameter >>> >>> >>> Could this be added or could the default be good if AS7 is detected >>> since we know the location in advance ? >>> >>> On 09/18/2012 12:05 PM, Nicolas Filotto wrote: >>> >>>> About exo.conf.dir and exo.conf.dir.name >>>> < http://exo.conf.dir.name >, >>>> the answer is no. About gatein.conf.dir, I have no idea since it >>>> sounds like gatein specific but I guess that the answer should be >>>> yes >>>> >>>> On Tue, Sep 18, 2012 at 9:39 AM, Thomas Heute < theute(a)redhat.com >>>> <mailto: theute(a)redhat.com >> wrote: >>>> >>>> >>>> Nicolas, can we specify exo.conf.dir, exo.conf.dir.name >>>> < http://exo.conf.dir.name >, gatein.conf.dir in a property file >>>> rather than command line ? >>>> >>>> Thomas. >>>> >>>> >>>> -------- Original Message -------- >>>> Subject: [gatein-dev] Starting AS7 package with no parameter >>>> Date: Tue, 11 Sep 2012 10:47:51 +0200 >>>> From: Thomas Heute < theute(a)redhat.com >>>> <mailto: theute(a)redhat.com >> >>>> To: gatein-dev < gatein-dev(a)lists.jboss.org >>>> <mailto: gatein-dev(a)lists.jboss.org >> >>>> >>>> >>>> >>>> >>>> At the moment starting GateIn with AS7 package requires to add >>>> 3 >>>> parameters: >>>> -Dexo.conf.dir=$JBOSS_HOME/**standalone/configuration/**gatein >>>> - Dexo.conf.dir.name < http://Dexo.conf.dir.name >=gatein" >>>> -Dgatein.conf.dir=\\\${jboss.**server.config.dir}/gatein >>>> >>>> While in most cases they would not change. >>>> >>>> This is an issue for tools like Eclipse as well since they >>>> 'bypass' >>>> standalone.conf >>>> >>>> Do we have a way to make those, good defaults depending on the >>>> app >>>> server ? Or to have those written in a configuration/property >>>> file so >>>> that it doesn't require any command line parameter ? >>>> >>>> Also do we have good documentation about those 3 properties ? >>>> >>>> Thanks >>>> Thomas. >>>> >>>> ______________________________**_________________ >>>> gatein-dev mailing list >>>> gatein-dev(a)lists.jboss.org <mailto: gatein-dev(a)lists.jboss.org > >>>> https://lists.jboss.org/**mailman/listinfo/gatein-dev<https://lists.jb... >>>> >>>> >>>> >>>> ______________________________**_________________ >>> gatein-dev mailing list >>> gatein-dev(a)lists.jboss.org >>> https://lists.jboss.org/**mailman/listinfo/gatein-dev<https://lists.jb... >>> >>> ______________________________**_________________ >> gatein-dev mailing list >> gatein-dev(a)lists.jboss.org >> https://lists.jboss.org/**mailman/listinfo/gatein-dev<https://lists.jb... >> >> >>

Don't forget that eXo JCR has a standalone mode (without gatein) so we cannot set default values specific to gatein On Wed, Sep 19, 2012 at 7:02 AM, Thomas Heute <theute(a)redhat.com&gt; wrote: > > Could this be added or could the default be good if AS7 is detected since > we know the location in advance ? > > On 09/18/2012 12:05 PM, Nicolas Filotto wrote: > >> About exo.conf.dir and exo.conf.dir.name <http://exo.conf.dir.name>;, >> the answer is no. About gatein.conf.dir, I have no idea since it sounds >> like gatein specific but I guess that the answer should be yes >> >> >> On Tue, Sep 18, 2012 at 9:39 AM, Thomas Heute <theute(a)redhat.com&lt;mailto: >> theute(a)redhat.com&gt;&gt; wrote: >> >> >> Nicolas, can we specify exo.conf.dir, exo.conf.dir.name >> <http://exo.conf.dir.name>;, gatein.conf.dir in a property file >> >> rather than command line ? >> >> Thomas. >> >> >> -------- Original Message -------- >> Subject: [gatein-dev] Starting AS7 package with no parameter >> Date: Tue, 11 Sep 2012 10:47:51 +0200 >> From: Thomas Heute <theute(a)redhat.com <mailto:theute@redhat.com>> >> To: gatein-dev <gatein-dev(a)lists.jboss.org >> <mailto:gatein-dev@lists.**jboss.org <gatein-dev(a)lists.jboss.org&gt;&gt;&gt; >> >> >> >> >> At the moment starting GateIn with AS7 package requires to add 3 >> parameters: >> -Dexo.conf.dir=$JBOSS_HOME/**standalone/configuration/**gatein >> -Dexo.conf.dir.name <http://Dexo.conf.dir.name>=**gatein" >> >> -Dgatein.conf.dir=\\\${jboss.**server.config.dir}/gatein >> >> While in most cases they would not change. >> >> This is an issue for tools like Eclipse as well since they 'bypass' >> standalone.conf >> >> Do we have a way to make those, good defaults depending on the app >> server ? Or to have those written in a configuration/property file so >> that it doesn't require any command line parameter ? >> >> Also do we have good documentation about those 3 properties ? >> >> Thanks >> Thomas. >> >> ______________________________**_________________ >> gatein-dev mailing list >> gatein-dev(a)lists.jboss.org <mailto:gatein-dev@lists.**jboss.org<gatein-dev@lists.jboss.org> >> > >> https://lists.jboss.org/**mailman/listinfo/gatein-dev<https://lists.jb... >> >> >> >> >