[portal-commits] JBoss Portal SVN: r9293 - in docs/tags/JBoss_Portal_2_6_3/referenceGuide/en: modules and 1 other directory.

Author: chris.laprun(a)jboss.com Date: 2007-12-04 16:49:12 -0500 (Tue, 04 Dec 2007) New Revision: 9293 Added: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/bea_insider.png docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/erase_registration.png docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/erase_registration_warning.png docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/modify_reg_end.png docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/modify_reg_modify.png docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/modify_reg_self.png docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/modify_reg_self_end.png docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/modify_reg_start.png Modified: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/modules/wsrp.xml Log: - Added content for Consumer maintenance section. - Still need content for producer configuration... Added: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/bea_insider.png =================================================================== (Binary files differ) Property changes on: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/bea_insider.png ___________________________________________________________________ Name: svn:mime-type + image/png Added: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/erase_registration.png =================================================================== (Binary files differ) Property changes on: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/erase_registration.png ___________________________________________________________________ Name: svn:mime-type + image/png Added: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/erase_registration_warning.png =================================================================== (Binary files differ) Property changes on: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/erase_registration_warning.png ___________________________________________________________________ Name: svn:mime-type + image/png Added: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/modify_reg_end.png =================================================================== (Binary files differ) Property changes on: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/modify_reg_end.png ___________________________________________________________________ Name: svn:mime-type + image/png Added: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/modify_reg_modify.png =================================================================== (Binary files differ) Property changes on: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/modify_reg_modify.png ___________________________________________________________________ Name: svn:mime-type + image/png Added: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/modify_reg_self.png =================================================================== (Binary files differ) Property changes on: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/modify_reg_self.png ___________________________________________________________________ Name: svn:mime-type + image/png Added: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/modify_reg_self_end.png =================================================================== (Binary files differ) Property changes on: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/modify_reg_self_end.png ___________________________________________________________________ Name: svn:mime-type + image/png Added: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/modify_reg_start.png =================================================================== (Binary files differ) Property changes on: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/images/wsrp/modify_reg_start.png ___________________________________________________________________ Name: svn:mime-type + image/png Modified: docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/modules/wsrp.xml =================================================================== --- docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/modules/wsrp.xml 2007-12-04 21:48:58 UTC (rev 9292) +++ docs/tags/JBoss_Portal_2_6_3/referenceGuide/en/modules/wsrp.xml 2007-12-04 21:49:12 UTC (rev 9293) @@ -19,68 +19,93 @@ <para>The Web Services for Remote Portlets specification defines a web service interface for accessing and interacting with interactive presentation-oriented web services. It has been produced through the efforts of the Web Services for Remote Portlets (WSRP) OASIS Technical Committee. It is based on the requirements - gathered and on the concrete proposals made to the committee.</para> + gathered and on the concrete proposals made to the committee. + </para> <para>Scenarios that motivate WSRP functionality include: <itemizedlist> <listitem>Content hosts, such as portal servers, providing Portlets as presentation-oriented web services - that can be used by aggregation engines.</listitem> + that can be used by aggregation engines. + </listitem> <listitem>Aggregating frameworks, including portal servers, consuming presentation-oriented web services - offered by content providers and integrating them into the framework.</listitem> + offered by content providers and integrating them into the framework. + </listitem> </itemizedlist> </para> <para>More information on WSRP can be found on the <ulink url="http://www.oasis-open.org/committees/tc_home.php?wg_abbrev=wsrp... website for WSRP</ulink>. - We suggest reading the <ulink - url="http://www.oasis-open.org/committees/tc_home.php?wg_abbrev=wsrp... + We suggest reading the + <ulink + url="http://www.oasis-open.org/committees/tc_home.php?wg_abbrev=wsrp... + </ulink> for a good, albeit technical, overview of WSRP. </para> </sect1> <sect1 id="wsrp_support"> <title>Level of support in JBoss Portal</title> - <para>The WSRP Technical Committee defined <ulink url="http://www.oasis-open.org/committees/download.php/3073">... - Use Profiles</ulink> to help with WSRP interoperability. We will refer to terms defined in that document in + <para>The WSRP Technical Committee defined + <ulink url="http://www.oasis-open.org/committees/download.php/3073">... + Use Profiles + </ulink> + to help with WSRP interoperability. We will refer to terms defined in that document in this section. </para> <para>JBoss Portal provides a Simple level of support for our WSRP Producer except that out-of-band registration is not currently handled. We support in-band registration and persistent local state (which are - defined at the Complex level).</para> + defined at the Complex level). + </para> <para>On the Consumer side, JBoss Portal provides a Medium level of support for WSRP, except that we only handle HTML markup (as Portal itself doesn't handle other markup types). We do support explicit portlet cloning and - we fully support the PortletManagement interface.</para> + we fully support the PortletManagement interface. + </para> <para>As far as caching goes, we have Level 1 Producer and Consumer. We support Cookie handling properly on the Consumer and our Producer requires initialization of cookies (as we have found that it improved interoperabilty with some consumers). We don't support custom window states or modes, as Portal doesn't either. We do, however, support CSS on both the Producer (though it's more a function of the portlets than inherent Producer - capability) and Consumer.</para> + capability) and Consumer. + </para> <para>While we provide a complete implementation of WSRP 1.0, we do need to go through the - <ulink url="http://www.oasis-open.org/committees/download.php/6018">... statements</ulink> and + <ulink url="http://www.oasis-open.org/committees/download.php/6018">... statements</ulink> + and perform more interoperability testing (an area that needs to be better supported by the WSRP Technical - Committee and Community at large).</para> + Committee and Community at large). + </para> </sect1> <sect1> <title>Deploying JBoss Portal's WSRP services</title> <para> JBoss Portal provides a complete support of WSRP 1.0 standard interfaces and offers - both consumer and producer services. WSRP support is provided by the <filename>portal-wsrp.sar</filename> - service archive, included in the main <filename>jboss-portal.sar</filename> service archive, if you've + both consumer and producer services. WSRP support is provided by the + <filename>portal-wsrp.sar</filename> + service archive, included in the main + <filename>jboss-portal.sar</filename> + service archive, if you've obtained JBoss Portal from a binary distribution. If you don't intend on using WSRP, we recommend that you - remove <filename>portal-wspr.sar</filename> from the main <filename>jboss-portal.sar</filename> service - archive.</para> + remove + <filename>portal-wspr.sar</filename> + from the main + <filename>jboss-portal.sar</filename> + service + archive. + </para> <para>If you've obtained the source distribution of JBoss Portal, you need to build and deploy the WSRP service separately. Please follow the instructions on how to install - <ulink url="http://docs.jboss.com/jbportal/v2.6/reference-guide/en/html/ins... Portal - from the sources</ulink>. Once this is done, navigate to <filename>JBOSS_PORTAL_HOME_DIRECTORY/wsrp</filename> + <ulink url="http://docs.jboss.com/jbportal/v2.6/reference-guide/en/html/ins... + Portal + from the sources</ulink>. Once this is done, navigate to + <filename>JBOSS_PORTAL_HOME_DIRECTORY/wsrp</filename> and type: <command>build deploy</command> - At the end of the build process, <filename>portal-wsrp.sar</filename> is copied to + At the end of the build process, + <filename>portal-wsrp.sar</filename> + is copied to <filename>JBOSS_HOME/server/default/deploy</filename>. </para> @@ -88,7 +113,9 @@ <title>Considerations to use WSRP when running Portal on a non-default port</title> <para>If you have modified the port number on which Portal runs, you will also need <ulink url="http://wiki.jboss.org/wiki/Wiki.jsp?page=WSRPChangePorts"&... the port information for - WSRP</ulink> as found on <ulink url="http://wiki.jboss.org/wiki/Wiki.jsp?page=JBossPortal">J... Portal's + WSRP + </ulink> + as found on<ulink url="http://wiki.jboss.org/wiki/Wiki.jsp?page=JBossPortal">J... Portal's wiki</ulink>. </para> </sect2> @@ -96,7 +123,8 @@ <sect2> <title>Considerations to use WSRP with SSL</title> <para>It is possible to use WSRP over SSL for secure exchange of data. Please refer to the - <ulink url="http://wiki.jboss.org/wiki/Wiki.jsp?page=WSRPUseSSL">in... on + <ulink url="http://wiki.jboss.org/wiki/Wiki.jsp?page=WSRPUseSSL">in... + on how to do so from <ulink url="http://wiki.jboss.org/wiki/Wiki.jsp?page=JBossPortal">J... Portal's wiki</ulink>. </para> @@ -105,14 +133,22 @@ <sect1> <title>Making a portlet remotable</title> - <para>JBoss Portal does <emphasis role="bold">NOT</emphasis>, by default, expose local portlets for consumption by remote WSRP + <para>JBoss Portal does<emphasis role="bold">NOT</emphasis>, by default, expose local portlets for consumption by + remote WSRP consumers. In order to make a portlet remotely available, it must be made "remotable" by adding a - <literal>remotable</literal> element to the <filename>jboss-portlet.xml</filename> deployment descriptor for - that portlet. If a <filename>jboss-portlet.xml</filename> file does not exist, one must be added to the - <filename>WEB-INF</filename> folder of the web application containing the portlet. + <literal>remotable</literal> + element to the + <filename>jboss-portlet.xml</filename> + deployment descriptor for + that portlet. If a + <filename>jboss-portlet.xml</filename> + file does not exist, one must be added to the + <filename>WEB-INF</filename> + folder of the web application containing the portlet. </para> <para>In the following example, the "BasicPortlet" portlet is specified as being remotable. The - <literal>remotable</literal> element is optional. + <literal>remotable</literal> + element is optional. </para> <example> <programlisting><![CDATA[ @@ -127,9 +163,13 @@ </portlet-app>]]></programlisting> </example> <para> - It is also possible to specify that all the portlets declared within a given <filename>jboss-portlet.xml</filename> - file have a specific "remotable" status by default. This is done by adding a single <literal>remotable</literal> - element to the root <literal>portlet-app</literal> element. Usually, this feature will be used to remotely expose + It is also possible to specify that all the portlets declared within a given + <filename>jboss-portlet.xml</filename> + file have a specific "remotable" status by default. This is done by adding a single + <literal>remotable</literal> + element to the root + <literal>portlet-app</literal> + element. Usually, this feature will be used to remotely expose several portlets without having to specify the status for all the declared portlets. Let's look at an example: </para> <example> @@ -156,12 +196,19 @@ <para> In the example above, we defined two portlets with a default "remotable" status set to true. This means that all portlets defined in this descriptor are, by default, exposed remotely by JBoss Portal's WSRP producer. - Note, however, that it is possible to override the default behavior by adding a <literal>remotable</literal> + Note, however, that it is possible to override the default behavior by adding a + <literal>remotable</literal> element to a portlet description. In that case, the "remotable" status defined by the portlet takes precedence - over the default. In the example above, the <varname>RemotelyExposedPortlet</varname> inherits the "remotable" - status defined by default since it does not specify a <literal>remotable</literal> element in its description. - The <varname>NotRemotelyExposedPortlet</varname>, however, overrides the default behavior and is not remotely - exposed. Note that in the absence of a top-level <literal>remotable</literal> element, portlets are NOT + over the default. In the example above, the + <varname>RemotelyExposedPortlet</varname> + inherits the "remotable" + status defined by default since it does not specify a + <literal>remotable</literal> + element in its description. + The<varname>NotRemotelyExposedPortlet</varname>, however, overrides the default behavior and is not remotely + exposed. Note that in the absence of a top-level + <literal>remotable</literal> + element, portlets are NOT remotely exposed. </para> </sect1> @@ -171,19 +218,30 @@ <para>WSRP Consumers vary a lot as far as how they are configured. Most of them require that you either specify the URL for the Producer's WSDL definition or the URLs for the individual endpoints. Please refer to your Consumer's documentation for specific instructions. For instructions on how to do so in JBoss Portal, please - refer to <xref linkend="consumer_configuration"/>. + refer to<xref linkend="consumer_configuration"/>. </para> <para> JBoss Portal's Producer is automatically set up when you deploy a portal instance with the WSRP service. - You can access the WSDL file at - <filename>http://{hostname}:{port}/portal-wsrp/MarkupService?wsdl</filename>. You can access the endpoint URLs at: + You can access the WSDL file at + <filename>http://{hostname}:{port}/portal-wsrp/MarkupService?wsdl</filename>. You can access the endpoint URLs + at: <itemizedlist> - <listitem><filename>http://{hostname}:{port}/portal-wsrp/ServiceDescriptionService</filename></listitem> - <listitem><filename>http://{hostname}:{port}/portal-wsrp/MarkupService</filename></listitem> - <listitem><filename>http://{hostname}:{port}/portal-wsrp/RegistrationService</filename></listitem> - <listitem><filename>http://{hostname}:{port}/portal-wsrp/PortletManagementService</filename></listitem> + <listitem> + <filename>http://{hostname}:{port}/portal-wsrp/ServiceDescriptionService</filename> + </listitem> + <listitem> + <filename>http://{hostname}:{port}/portal-wsrp/MarkupService</filename> + </listitem> + <listitem> + <filename>http://{hostname}:{port}/portal-wsrp/RegistrationService</filename> + </listitem> + <listitem> + <filename>http://{hostname}:{port}/portal-wsrp/PortletManagementService</filename> + </listitem> </itemizedlist> - The default hostname is <literal>localhost</literal> and the default port is 8080. + The default hostname is + <literal>localhost</literal> + and the default port is 8080. </para> </sect1> @@ -205,10 +263,14 @@ <para> JBoss Portal's default configuration exposes some of the sample portlets for remote consumption. As a way to test the WSRP service, a default consumer has been configured to consume these portlets. To make sure that - the service indeed works, check that there is a portlet provider with the <literal>self</literal> + the service indeed works, check that there is a portlet provider with the + <literal>self</literal> identifier in the portlet providers list in the Management portlet of the Admin page. All local portlets - marked as remotable are exposed as remote portlets via the <literal>self</literal> portlet - provider so that you can check that they work as expected with WSRP. The <filename>portal-wsrp.sar</filename> + marked as remotable are exposed as remote portlets via the + <literal>self</literal> + portlet + provider so that you can check that they work as expected with WSRP. The + <filename>portal-wsrp.sar</filename> file contains a WSRP Producer descriptor (<filename>default-wsrp.xml</filename>) that configures this default producer. This file can be edited or removed if needed. </para> @@ -227,7 +289,8 @@ <title>Using the configuration portlet</title> <para> As of Portal 2.6, a configuration portlet is provided to configure access to remote WSRP Producers - grahically. You can access it at <filename>http://{hostname}:{port}/portal/auth/portal/admin/WSRP</filename> + grahically. You can access it at + <filename>http://{hostname}:{port}/portal/auth/portal/admin/WSRP</filename> or by logging in as a Portal administrator and clicking on the WSRP tab in the Admin portal. If all went well, you should see something similar to this: <mediaobject> @@ -241,12 +304,14 @@ that a Consumer can be marked as requiring refresh meaning that the information held about it might not be up to date and refreshing it from the remote Producer might be a good idea. This can happen for several reasons: the service description for that remote Producer has not been fetched yet, the cached - version has expired or modifications have been made to the configuration that could potentially invalidate + version has expired or modifications have been made to the configuration that could potentially + invalidate it, thus requiring re-validation of the information. </para> <para> - Next, we create a new Consumer which we will call <literal>bea</literal>. Type "<literal>bea</literal>" in the + Next, we create a new Consumer which we will call<literal>bea</literal>. Type "<literal>bea</literal>" in + the "Create a consumer named:" field then click on "Create consumer": <mediaobject> <imageobject> @@ -264,30 +329,35 @@ This will retrieve the service description associated with the Producer which WSRP is described by the WSDL file found at the URL you just entered. In our case, querying the service description will allow us to learn that the Producer requires registration and that it expects a value for the registration - property named "<literal>registration/consumerRole</literal>": + property named<literal>registration/consumerRole</literal>: <mediaobject> <imageobject> <imagedata fileref="images/wsrp/config_refresh.png" format="png" align="center" valign="middle"/> </imageobject> </mediaobject> <note>At this point, there is no automated way to learn about which possible values (if any) are - expected by the remote Producer. In the case of BEA's public producer, the possible values are + expected by the remote Producer. In the case of BEA's public producer, the possible values are indicated in the registration property description. This is not always the case... Please refer to - the specific Producer's documentation.</note> - Enter "<literal>public</literal>" as the value for the registration property and press "Save &amp; Refresh" once more. You should now + the specific Producer's documentation. + </note> + Enter "<literal>public</literal>" as the value for the registration property and press "Save &amp; + Refresh" once more. You should now see something similar to: <mediaobject> <imageobject> <imagedata fileref="images/wsrp/config_end.png" format="png" align="center" valign="middle"/> </imageobject> </mediaobject> - The Consumer for the "<literal>bea</literal>" Producer should now be available as a portlet provider and + The Consumer for the + <literal>bea</literal> + Producer should now be available as a portlet provider and is ready to be used. </para> <para> A producer is configured, by default, by retrieving the producer's information via a WSDL URL. There are rare cases, however, where URLs need to be provided for each of the producer's end points. You can do - exactly that by unchecking the "Use WSDL?" checkbox, as is the case for the <literal>self</literal> + exactly that by unchecking the "Use WSDL?" checkbox, as is the case for the + <literal>self</literal> producer: <mediaobject> <imageobject> @@ -300,8 +370,10 @@ <sect3> <title>Using a WSRP Producer XML descriptor</title> - <para>We will create a <filename>public-bea-wsrp.xml</filename> descriptor. Note that the actual name does not - matter as long as it ends with <filename>-wsrp.xml</filename>: + <para>We will create a + <filename>public-bea-wsrp.xml</filename> + descriptor. Note that the actual name does not + matter as long as it ends with<filename>-wsrp.xml</filename>: <example> <programlisting><![CDATA[ <?xml version='1.0' encoding='UTF-8' ?> @@ -324,7 +396,9 @@ </example> This producer descriptor gives access to BEA's public WSRP producer. We will look at the details of the - different elements later. Note for now the <literal>producer-id</literal> element with a + different elements later. Note for now the + <literal>producer-id</literal> + element with a "<literal>bea</literal>" value. Put this file in the deploy directory and start the server (with JBoss Portal and its WSRP service deployed). </para> @@ -333,7 +407,8 @@ <sect3> <title>Configuring access to a remote portlet</title> <para> - Let's now look at the Admin page and the Management portlet. Click on the "Portlet definitions" tab at the + Let's now look at the Admin page and the Management portlet. Click on the "Portlet definitions" tab at + the top. Once this is done, look at the list of available portlet providers. If all went well, you should see something similar to this: <mediaobject> @@ -343,10 +418,17 @@ </mediaobject> </para> <para> - We have 3 available portlet providers: <literal>local, self</literal> and <literal>bea</literal>. The - <literal>local</literal> portlet provider exposes all the portlets deployed in this particular instance of Portal. As - explained above, the <literal>self</literal> provider refers to the default WSRP consumer bundled with Portal that consumes - the portlets exposed by the default WSRP producer. The <literal>bea</literal> provider corresponds to BEA's public producer + We have 3 available portlet providers: + <literal>local, self</literal> + and<literal>bea</literal>. The + <literal>local</literal> + portlet provider exposes all the portlets deployed in this particular instance of Portal. As + explained above, the + <literal>self</literal> + provider refers to the default WSRP consumer bundled with Portal that consumes + the portlets exposed by the default WSRP producer. The + <literal>bea</literal> + provider corresponds to BEA's public producer we just configured. Select it and click on "View portlets". You should now see something similar to: <mediaobject> <imageobject> @@ -357,7 +439,8 @@ <para> From there on out, you should be able to configure WSRP portlets just as any other. In particular, you can create an instance of one of the remote portlets offered by BEA's public producer just like you would - create an instance of a local portlet and then assign it to a window in a page. If you go to that page, you + create an instance of a local portlet and then assign it to a window in a page. If you go to that page, + you should see something similar to below for this portlet: <mediaobject> <imageobject> @@ -366,13 +449,15 @@ </mediaobject> </para> </sect3> - </sect2> + </sect2> <sect2> <title>WSRP Producer descriptors</title> <para> - A WSRP Producer descriptor is an XML file which name ends in <filename>-wsrp.xml</filename> and + A WSRP Producer descriptor is an XML file which name ends in + <filename>-wsrp.xml</filename> + and which can be dropped in the deploy directory of the JBoss application server or nested in .sar files. It is possible to configure access to several different producers within a single descriptor or use one file per producer, depending on your needs. The DTD for the WSRP Producer descriptor format can be found at @@ -388,102 +473,141 @@ producer in the database will be used. If a producer identifier is found that wasn't already in the database, that producer information will be processed and recorded in the database. Therefore, if you wish to delete a producer configuration, you need to delete the associated information in the database - (this can be accomplished using the configuration portlet as we saw in <xref linkend="consumer_gui"/>) - <emphasis>AND</emphasis> remove the associated information in any + (this can be accomplished using the configuration portlet as we saw in<xref linkend="consumer_gui"/>) + <emphasis>AND</emphasis> + remove the associated information in any WSRP Producer descriptor (if such information exists) as the producer will be re-created the next time the WSRP is launched if that information is not removed. </note> </para> <sect3> - <title>Required configuration information</title> + <title>Required configuration information</title> - <para>Let's now look at which information needs to be provided to configure access to a remote producer.</para> + <para>Let's now look at which information needs to be provided to configure access to a remote producer. + </para> - <para>First, we need to provide an identifier for the producer we are configuring so that we can refer to it - afterwards. This is accomplished via the mandatory <literal>id</literal> attribute of the - <literal>&lt;wsrp-producer&gt;</literal> element.</para> + <para>First, we need to provide an identifier for the producer we are configuring so that we can refer to it + afterwards. This is accomplished via the mandatory + <literal>id</literal> + attribute of the + <literal>&lt;wsrp-producer&gt;</literal> + element. + </para> - <para>JBoss Portal also needs to learn about the remote producer's endpoints to be able to connect to the - remote web services and perform WSRP invocations. Two options are currently supported to provide this - information: - </para> + <para>JBoss Portal also needs to learn about the remote producer's endpoints to be able to connect to the + remote web services and perform WSRP invocations. Two options are currently supported to provide this + information: + </para> - <para> - <itemizedlist> - <listitem>You can provide the URLs for each of the different WSRP interfaces offered by the remote - producer via the <literal>&lt;endpoint-config&gt;</literal> element and its - <literal>&lt;service-description-url&gt;</literal>, - <literal>&lt;markup-url&gt;</literal>, <literal>&lt;registration-url&gt;</literal> - and <literal>&lt;portlet-management-url&gt;</literal> children. These URLs are - producer-specific so you will need to refer to your producer documentation or WSDL file to determine - the appropriate values. - </listitem> - <listitem>Alternatively, and this is the easiest way to configure your producer, you can provide a URL - pointing to the WSDL description of the producer's WSRP services. This is accomplished via the - <literal>&lt;endpoint-wsdl-url&gt;</literal> element. JBoss Portal will then - heuristically determine, from the information contained in the WSDL file, how to connect appropriately - to the remote WSRP services. - <note>It is important to note that, when using this method, JBoss Portal will try to match a port - name to an interface based solely on the provided name. There are no standard names for these ports - so it is possible (though rare) that this matching process fails. In this case, you should look at - the WSDL file and provide the endpoint URLs manually, as per the previous method.</note> - </listitem> - </itemizedlist> - </para> + <para> + <itemizedlist> + <listitem>You can provide the URLs for each of the different WSRP interfaces offered by the remote + producer via the + <literal>&lt;endpoint-config&gt;</literal> + element and its + <literal>&lt;service-description-url&gt;</literal>, + <literal>&lt;markup-url&gt;</literal>, + <literal>&lt;registration-url&gt;</literal> + and + <literal>&lt;portlet-management-url&gt;</literal> + children. These URLs are + producer-specific so you will need to refer to your producer documentation or WSDL file to + determine + the appropriate values. + </listitem> + <listitem>Alternatively, and this is the easiest way to configure your producer, you can provide a URL + pointing to the WSDL description of the producer's WSRP services. This is accomplished via the + <literal>&lt;endpoint-wsdl-url&gt;</literal> + element. JBoss Portal will then + heuristically determine, from the information contained in the WSDL file, how to connect + appropriately + to the remote WSRP services. + <note>It is important to note that, when using this method, JBoss Portal will try to match a port + name to an interface based solely on the provided name. There are no standard names for these + ports + so it is possible (though rare) that this matching process fails. In this case, you should look + at + the WSDL file and provide the endpoint URLs manually, as per the previous method. + </note> + </listitem> + </itemizedlist> + </para> - <para>Both the <literal>id</literal> attribute and either - <literal>&lt;endpoint-config&gt;</literal> or - <literal>&lt;endpoint-wsdl-url&gt;</literal> elements - are required for a functional remote producer configuration. - </para> - </sect3> + <para>Both the + <literal>id</literal> + attribute and either + <literal>&lt;endpoint-config&gt;</literal> + or + <literal>&lt;endpoint-wsdl-url&gt;</literal> + elements + are required for a functional remote producer configuration. + </para> + </sect3> - <sect3> - <title>Optional configuration</title> - <para>It is also possible to provide addtional configuration, which, in some cases, might be important to - establish a proper connection to the remote producer. - </para> + <sect3> + <title>Optional configuration</title> + <para>It is also possible to provide addtional configuration, which, in some cases, might be important to + establish a proper connection to the remote producer. + </para> - <para>One such optional configuration concerns caching. To prevent useless roundtrips between the local - consumer and the remote producer, it is possible to cache some of the information sent by the producer (such - as the list of offered portlets) for a given duration. The rate at which the information is refreshed is - defined by the <literal>expiration-cache</literal> attribute of the - <literal>&lt;wsrp-producer&gt;</literal> element which specifies the - refreshing period in seconds. For example, providing a value of 120 for expiration-cache means that the - producer information will not be refreshed for 2 minutes after it has been somehow accessed. If no value - is provided, JBoss Portal will always access the remote producer regardless of whether the remote - information has changed or not. Since, in most instances, the information provided by the producer does not - change often, we recommend that you use this caching facility to minimize bandwidth usage. - </para> + <para>One such optional configuration concerns caching. To prevent useless roundtrips between the local + consumer and the remote producer, it is possible to cache some of the information sent by the producer + (such + as the list of offered portlets) for a given duration. The rate at which the information is refreshed is + defined by the + <literal>expiration-cache</literal> + attribute of the + <literal>&lt;wsrp-producer&gt;</literal> + element which specifies the + refreshing period in seconds. For example, providing a value of 120 for expiration-cache means that the + producer information will not be refreshed for 2 minutes after it has been somehow accessed. If no value + is provided, JBoss Portal will always access the remote producer regardless of whether the remote + information has changed or not. Since, in most instances, the information provided by the producer does + not + change often, we recommend that you use this caching facility to minimize bandwidth usage. + </para> - <para>Additionally, some producers require consumers to register with them before authorizing them to access - their offered portlets. If you know that information beforehand, you can provide the required registration - information in the producer configuration so that the Portal consumer can register with the remote - producer when required. - <note>At this time, though, only simple String properties are supported and it is not possible to configure - complex registration data. This should however be sufficient for most cases.</note> - </para> + <para>Additionally, some producers require consumers to register with them before authorizing them to access + their offered portlets. If you know that information beforehand, you can provide the required + registration + information in the producer configuration so that the Portal consumer can register with the remote + producer when required. + <note>At this time, though, only simple String properties are supported and it is not possible to + configure + complex registration data. This should however be sufficient for most cases. + </note> + </para> - <para>Registration configuration is done via the <literal>&lt;registration-data&gt;</literal> - element. Since JBoss Portal can generate the mandatory information for you, if the remote producer does not - require any registration properties, you only need to provide an empty - <literal>&lt;registration-data&gt;</literal> element. Values for the registration properties - required by the remote producer can be provided via <literal>&lt;property&gt;</literal> - elements. See the example below for more details. Additionally, you can override the default consumer name - automatically provided by JBoss Portal via the <literal>&lt;consumer-name&gt;</literal> - element. If you choose to provide a consumer name, please remember that this should uniquely identify your - consumer. - </para> - </sect3> + <para>Registration configuration is done via the + <literal>&lt;registration-data&gt;</literal> + element. Since JBoss Portal can generate the mandatory information for you, if the remote producer does + not + require any registration properties, you only need to provide an empty + <literal>&lt;registration-data&gt;</literal> + element. Values for the registration properties + required by the remote producer can be provided via + <literal>&lt;property&gt;</literal> + elements. See the example below for more details. Additionally, you can override the default consumer + name + automatically provided by JBoss Portal via the + <literal>&lt;consumer-name&gt;</literal> + element. If you choose to provide a consumer name, please remember that this should uniquely identify + your + consumer. + </para> + </sect3> </sect2> <sect2> <title>Examples</title> <para> - Here is the configuration of the <literal>self</literal> producer as found in - <filename>default-wsrp.xml</filename> with a cache expiring every five minutes: + Here is the configuration of the + <literal>self</literal> + producer as found in + <filename>default-wsrp.xml</filename> + with a cache expiring every five minutes: </para> <example> @@ -519,8 +643,10 @@ </programlisting> </example> - <para>Here is an example of a WSRP descriptor with a 2 minute caching time and manual definition of the endpoint - URLs:</para> + <para>Here is an example of a WSRP descriptor with a 2 minute caching time and manual definition of the + endpoint + URLs: + </para> <example> <programlisting><![CDATA[ @@ -551,7 +677,8 @@ </example> <para>Here is an example of a WSRP descriptor with endpoint definition via remote WSDL file, registration - data and cache expiring every minute:</para> + data and cache expiring every minute: + </para> <example> <programlisting><![CDATA[ @@ -585,30 +712,204 @@ <sect3> <title>Registration modification for service upgrade</title> + <para> + Producers often offer several levels of service depending on consumers' subscription levels (for + example). + This is implemented at the WSRP level with the registration concept: producers assert which level of + service to provide to consumers based on the values of given registration properties. + </para> + <para> + It is therefore sometimes necessary to modify the registration that concretizes the service agreement + between a consumer and a producer. An example of easily available producer offering different level of + services is BEA's public producer. We configured access to that producer in + <xref linkend="consumer_gui"/> + . + If you recall, the producer was requiring registration and required a value to be provided for the + <literal>registration/consumerRole</literal> + property. The description of that property indicated that + three values were possible:<literal>public</literal>, + <literal>partner</literal> + or + <literal>insider</literal> + each corresponding to a different service level. We registered using the + <literal>public</literal> + service level. This gave us access to three portlets as shown here: + <mediaobject> + <imageobject> + <imagedata fileref="images/wsrp/bea.png" format="png" align="center" valign="middle"/> + </imageobject> + </mediaobject> + </para> + <para> + Suppose now that we would like to upgrade our service level to the "insider" level. We will need to + tell BEA's producer that our registration data has been modified. Let's see how to do this. Assuming you + have configured access to the producer as previously described, please go to the configuration screen for + the + <literal>bea</literal> + producer and modify the value of the + <literal>registration/consumerRole</literal> + to + <literal>insider</literal> + instead of<literal>public</literal>: + <mediaobject> + <imageobject> + <imagedata fileref="images/wsrp/modify_reg_start.png" format="png" align="center" valign="middle"/> + </imageobject> + </mediaobject> + Now click on "Update properties" to save the change. A "Modify registration" button should now appear to + let you send this new data to the remote producer: + <mediaobject> + <imageobject> + <imagedata fileref="images/wsrp/modify_reg_modify.png" format="png" align="center" + valign="middle"/> + </imageobject> + </mediaobject> + Click on this new button and, if everything went well and your updated registration has been accepted by + the remote producer, you should see something similar to: + <mediaobject> + <imageobject> + <imagedata fileref="images/wsrp/modify_reg_end.png" format="png" align="center" valign="middle"/> + </imageobject> + </mediaobject> + You can now check the list of available portlets from the + <literal>bea</literal> + provider and verify that + new portlets are now available: + <mediaobject> + <imageobject> + <imagedata fileref="images/wsrp/bea_insider.png" format="png" align="center" valign="middle"/> + </imageobject> + </mediaobject> + </para> + </sect3> <sect3> <title>Registration modification on producer error</title> + + <para> + It can also happen that a producer administrator decided to require more information from registered + consumers. In this case, invoking operations on the producer will fail with an + <exceptionname>OperationFailedFault</exceptionname>. JBoss Portal will attempt to help you in this + situation. Let's walk through an example using the + <literal>self</literal> + producer. Let's assume that + registration is required without any registration properties (as is the case by default). If you go to + the configuration screen for this producer, you should see: + <mediaobject> + <imageobject> + <imagedata fileref="images/wsrp/config_self.png" format="png" align="center" valign="middle"/> + </imageobject> + </mediaobject> + + Now suppose that the administrator of the producer now requires a value to be provided for an + <literal>email</literal> + registration property. We will actually see how to do perform this operation + in JBoss Portal when we examine how to configure Portal's producer in<xref linkend="producer_config"/>. + Operations with this producer will now fail. If you suspect that a registration modification is required, + you should go to the configuration screen for this remote producer and refresh the information held by + the consumer by pressing "Refresh &amp; Save": + <mediaobject> + <imageobject> + <imagedata fileref="images/wsrp/modify_reg_self.png" format="png" align="center" valign="middle"/> + </imageobject> + </mediaobject> + + As you can see, the configuration screen now shows the currently held registration information and + the expected information from the producer. Enter a value for the + <literal>email</literal> + property + and then click on "Modify registration". If all went well and the producer accepted your new registration + data, you should see something similar to: + <mediaobject> + <imageobject> + <imagedata fileref="images/wsrp/modify_reg_self_end.png" format="png" align="center" + valign="middle"/> + </imageobject> + </mediaobject> + + <note>As of WSRP 1, it is rather difficult to ascertain for sure what caused an + <exceptionname>OperationFailedFault</exceptionname> + as it is the generic exception returned by + producers if something didn't quite happen as expected during a method invocation. This means that + <exceptionname>OperationFailedFault</exceptionname> + can be caused by several different reasons, one + of them being a request to modify the registration data. Please take a look at the log files to see + if you can gather more information as to what happened. WSRP 2 introduces an exception that is + specific to a request to modify registrations thus reducing the ambiguity that currently exists. + </note> + </para> </sect3> </sect2> <sect2> - <title>Deregistration</title> + <title>Consumer operations</title> + <para> + Several operations are available from the consumer list view of the WSRP configuration portlet: + <mediaobject> + <imageobject> + <imagedata fileref="images/wsrp/consumer_operations.png" format="png" align="center" valign="middle"/> + </imageobject> + </mediaobject> + </para> + <para> + The available operations are: + <itemizedlist> + <listitem>Configure: displays the consumer details and allows user to edit them</listitem> + <listitem> + Refresh: forces the consumer to retrieve the service description from the remote producer to refresh + the local information (offered portlets, registration information, etc.) + </listitem> + <listitem> + Activate/Deactivate: activates/deactivates a consumer, governing whether it will be available to + provide portlets and receive portlet invocations + </listitem> + <listitem> + Register/Deregister: registers/deregisters a consumer based on whether registration is required + and/or acquired + </listitem> + <listitem>Delete: destroys the consumer, after deregisterting it if it was registered</listitem> + </itemizedlist> + </para> </sect2> <sect2> - <title>Consumer deletion</title> + <title>Erasing local registration data</title> + <para> + There are rare cases where it might be required to erase the local information without being able to + deregister first. This is the case when a consumer is registered with a producer that has been modified by + its administrator to not require registration anymore. If that ever was to happen (most likely, it won't), + you can erase the local registration information from the consumer so that it can resume interacting with + the remote producer. To do so, click on "Erase local registration" button next to the registration context + information on the consumer configuration screen: + <mediaobject> + <imageobject> + <imagedata fileref="images/wsrp/erase_registration.png" format="png" align="center" valign="middle"/> + </imageobject> + </mediaobject> + <note> + This operation is dangerous as it can result in inability to interact with the remote producer if invoked + when not required. A warning screen will be displayed to give you a chance to change your mind! + <mediaobject> + <imageobject> + <imagedata fileref="images/wsrp/erase_registration_warning.png" format="png" align="center" + valign="middle"/> + </imageobject> + </mediaobject> + </note> + </para> </sect2> </sect1> - <sect1> - <title>Configuring JBoss Portal's WSRP Producer</title> + <sect1 id="producer_config"> + <title>Configuring JBoss Portal's WSRP Producer</title> <sect2> <title>Overview</title> <para> You can configure the behavior of Portal's WSRP Producer by using the WSRP administration interface, which - is the preferred way, or by editing the <filename>conf/config.xml</filename> - file found in <filename>portal-wsrp.sar</filename>. Several aspects can be modified with respects to whether + is the preferred way, or by editing the + <filename>conf/config.xml</filename> + file found in<filename>portal-wsrp.sar</filename>. Several aspects can be modified with respects to whether registration is required for consumers to access the Producer's services. </para> </sect2> @@ -632,16 +933,23 @@ </registration-property-validator> </registration-configuration> </producer-configuration>]]></programlisting> - The top element <literal>&lt;producer-configuration&gt;</literal> contains a single - <literal>&lt;registration-configuration&gt;</literal> element that defines a - <literal>fullServiceDescritpionRequiresRegistration</literal> attribute with the value "true". This + The top element + <literal>&lt;producer-configuration&gt;</literal> + contains a single + <literal>&lt;registration-configuration&gt;</literal> + element that defines a + <literal>fullServiceDescritpionRequiresRegistration</literal> + attribute with the value "true". This configuration specifies that the WSRP producer requires registration to access its services but does not require any specific registration properties (apart from what is mandated by the WSRP standard). It does, however, require consumers to be registered before sending them a full service description. This means that our WSRP producer will not provide the list of offered portlets and other capabilities to unregistered - consumers. The <literal>&lt;registration-configuration&gt;</literal> element contains a - <literal>&lt;registration-property-validator&gt;</literal> element. We will look into property - validators in greater detail later in <xref linkend="registration-configuration"/>. Suffice to say for now + consumers. The + <literal>&lt;registration-configuration&gt;</literal> + element contains a + <literal>&lt;registration-property-validator&gt;</literal> + element. We will look into property + validators in greater detail later in<xref linkend="registration-configuration"/>. Suffice to say for now that this allows users to customize how Portal's WSRP Producer decides whether a given registration property is valid or not. </para> @@ -650,8 +958,9 @@ <title>Minimal producer configuration</title> <para> Requiring registration is optional: if you don't need your producer to require consumer registration, the - only thing you need to do is to provide an empty <literal>&lt;producer-configuration&gt;</literal> - element in <filename>portal-wsrp.sar/conf/config.xml</filename>. + only thing you need to do is to provide an empty + <literal>&lt;producer-configuration&gt;</literal> + element in<filename>portal-wsrp.sar/conf/config.xml</filename>. </para> </sect2> <sect2 id="registration-configuration"> @@ -659,12 +968,15 @@ <para> In order to require consumers to register with Portal's producer before interacting with it, you need to configure Portal's behavior with respect to registration. This is done via the - <literal>&lt;registration-configuration&gt;</literal> element. This element is optional as + <literal>&lt;registration-configuration&gt;</literal> + element. This element is optional as previously noted. It can be empty if you don't require registration properties. You can also specify whether or not registration is required in order for consumers to access the Producer's full service description, as noted in our discussion of the default configuration, above. This is done via the - <literal>fullServiceDescriptionRequiresRegistration</literal> attribute, which is optional. Acceptable - values for this attribute are "true" or "false", defaulting to "false" in which case the Producer will always + <literal>fullServiceDescriptionRequiresRegistration</literal> + attribute, which is optional. Acceptable + values for this attribute are "true" or "false", defaulting to "false" in which case the Producer will + always return the full service description, whether the consumer asking for it is registered or not. </para> @@ -672,7 +984,8 @@ <title>Customization of Registration handling behavior</title> <para> Registration handling behavior can be customized by users to suit their Producer needs. This is - accomplished by providing an implementation of the <literal>RegistrationPolicy</literal> + accomplished by providing an implementation of the + <literal>RegistrationPolicy</literal> interface. This interface defines methods that are called by Portal's Registration service so that decisions can be made appropriately. A default registration policy that provides basic behavior is provided and should be enough for most user needs. @@ -681,51 +994,65 @@ While the default registration policy provides default behavior for most registration-related aspects, there is still one aspect that requires configuration: whether a given value for a registration property is acceptable by the WSRP Producer. This is accomplished by plugging a - <literal>RegistrationPropertyValidator</literal> in the default registration policy. This + <literal>RegistrationPropertyValidator</literal> + in the default registration policy. This allows users to define their own validation mechanism. </para> - <para>Please refer to the Javadoc for <literal>org.jboss.portal.registration.RegistrationPolicy</literal> - and <literal>org.jboss.portal.Registration.policies.RegistrationPropertyValidator</literal> for more details + <para>Please refer to the Javadoc for + <literal>org.jboss.portal.registration.RegistrationPolicy</literal> + and + <literal>org.jboss.portal.Registration.policies.RegistrationPropertyValidator</literal> + for more details on what is expected of each method. </para> - <para>Defining a registration policy is required for the producer to be correctly configured. This is accomplished + <para>Defining a registration policy is required for the producer to be correctly configured. This is + accomplished by specifying the qualified class name of the registration policy via the - <literal>&lt;registration-policy&gt;</literal> element. Since we anticipate that most users + <literal>&lt;registration-policy&gt;</literal> + element. Since we anticipate that most users will use the default registration policy, it is possible to use the - <literal>&lt;registration-property-validator&gt;</literal> element and provide the class + <literal>&lt;registration-property-validator&gt;</literal> + element and provide the class name of your custom property validator instead. Since specifying a property validator only makes sense in the context of the default registration policy, both elements are mutually exclusive. <note>Since the policy or the validator are defined via their class name and dynamically loaded, it is - important that you make sure that the identified class is available to the application server. One way - to accomplish that is to deploy your policy implementation as JAR file in your AS instance deploy - directory. Note also that, since both policies and validators are dynamically instantiated, they must - provide a default, no-argument constructor.</note> + important that you make sure that the identified class is available to the application server. One way + to accomplish that is to deploy your policy implementation as JAR file in your AS instance deploy + directory. Note also that, since both policies and validators are dynamically instantiated, they must + provide a default, no-argument constructor. + </note> </para> </sect3> <sect3> <title>Registration properties</title> <para>You can also specify that consumers wishing to register with your producer provide acceptable values - for one or several registration properties. This is accomplished by providing a - <literal>&lt;registration-property-description&gt;</literal> element per required registration - property. This element lets provide information about a given registration property such as its name, its type, - the hint and label that will be sent to remote consumers. - <note> - At this time, only String (xsd:string) properties are supported. If your application requires more complex - properties, please let us know. - </note> + for one or several registration properties. This is accomplished by providing a + <literal>&lt;registration-property-description&gt;</literal> + element per required registration + property. This element lets provide information about a given registration property such as its name, its + type, + the hint and label that will be sent to remote consumers. + <note> + At this time, only String (xsd:string) properties are supported. If your application requires more + complex + properties, please let us know. + </note> </para> </sect3> </sect2> <sect2> - <title>Example</title> - <para> + <title>Example</title> + <para> Here is an example of a producer configurations requiring registration, barring consumers from accessing its - complete service description until they are correctly registered and requires consumers to provide acceptable + complete service description until they are correctly registered and requires consumers to provide + acceptable values for two String registration properties named "name1" and "name2" respectively. The registration - service will use the <literal>com.example.portal.SomeCustomRegistrationPolicy</literal> class for its + service will use the + <literal>com.example.portal.SomeCustomRegistrationPolicy</literal> + class for its registration policy. <example> <programlisting><![CDATA[ @@ -753,6 +1080,6 @@ </example> </para> - </sect2> - </sect1> - </chapter> + </sect2> + </sect1> +</chapter>