OIDC Identity Brokering with Client parameter forward
by 乗松隆志 / NORIMATSU，TAKASHI
Hello.
When using OIDC Identity Brokering, I've found that the keycloak's built-in OIDC Identity Brokering provider does not have the feature of forwarding some parameters originated from a client application to an external IdP.
Such the feature might be beneficial when you host its own IdP and want to configure its UX based on forwarded client parameters and so on.
Previously, I had realized this feature by implementing custom Authentication provider and User Storage provider.
However, it had been too much complicated and I had the advice to use Identity Brokering.
https://github.com/keycloak/keycloak/pull/4260
Therefore, I've implemented this feature(Forwarding parameters) based on this OIDC Identity Brokering built-in provider.
https://github.com/keycloak/keycloak/pull/5163
Forwarded parameters are prefixed with "fwd_".
It needs some documentation so that I'd like to do that if this proposal is accepted.
Also, I've created corresponding JIRA ticket.
https://issues.jboss.org/browse/KEYCLOAK-7201
Hope this PR is reviewed and merged.
Best Regards
Takashi Norimatsu
Hitachi, Ltd.
8 years
Internationalization - question
by Adrien DESBIAUX
Hello!
I would like to be sure to understand well how internationalization works in KC:
I can only access those 2 variables in the template:
- locale.supported
and
- locale.current
https://github.com/keycloak/keycloak/blob/master/services/src/main/java/o...
My issue is that ${locale.current} return the "language name" as a string.
But it would be very helpful to get the language code instead or another property to get for example "de" for Deutsch. That would make internationalization logics more standard to other tools.
Would you agree or did I miss something?
Thank you in advance for your feedback.
Keycloak is still an awesome tool :)
Cheers!
8 years
Re: [keycloak-dev] keycloak-dev Digest, Vol 58, Issue 16
by Hafiz Syed Umer Ahmed
Hi,
I am using keycloak 3.4.1 final on docker with PostgreSQL. I have written a
spring boot application using keycloak admin client. The problem i am
facing is that when i make several request on a particular api for example
creating a user in keycloak it gets halt and does not respond.
For example : Create user api
after 10 successful request it does not process the 11th request and
postman or restlet client shows "sending request" . After halting state it
does not process any other api request until and unless i restart my spring
boot application. I am not getting what is the issue. I have checked all
the credentials and my application settings as well. Is there any rate
limit on api calling in keycloak or there is some other issue ??
Regards
Umer
On Wed, Apr 18, 2018 at 5:38 PM, <keycloak-dev-request(a)lists.jboss.org>
wrote:
> Send keycloak-dev mailing list submissions to
> keycloak-dev(a)lists.jboss.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.jboss.org/mailman/listinfo/keycloak-dev
> or, via email, send a message with subject or body 'help' to
> keycloak-dev-request(a)lists.jboss.org
>
> You can reach the person managing the list at
> keycloak-dev-owner(a)lists.jboss.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of keycloak-dev digest..."
>
>
> Today's Topics:
>
> 1. Application and server in separate networks (Christian Beikov)
> 2. Re: ui_locales query parameter? (Stian Thorgersen)
> 3. Re: ui_locales query parameter? (Stan Silvert)
> 4. Re: ui_locales query parameter? (Stian Thorgersen)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 18 Apr 2018 13:45:06 +0200
> From: Christian Beikov <christian.beikov(a)gmail.com>
> Subject: [keycloak-dev] Application and server in separate networks
> To: keycloak-dev <keycloak-dev(a)lists.jboss.org>
> Message-ID: <41e1a805-cc38-50cf-f794-cda6afd49313(a)gmail.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Hi,
>
> is it necessary that an application secured by Keycloak can access the
> Keycloak server? Or is it enough if the Browser can access the Keycloak
> server?
>
> --
>
> Mit freundlichen Gr??en,
> ------------------------------------------------------------------------
> *Christian Beikov*
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 18 Apr 2018 13:46:25 +0200
> From: Stian Thorgersen <sthorger(a)redhat.com>
> Subject: Re: [keycloak-dev] ui_locales query parameter?
> To: Stan Silvert <ssilvert(a)redhat.com>
> Cc: keycloak-dev <keycloak-dev(a)lists.jboss.org>
> Message-ID:
> <CAJgngAeShg4HZL5tTR-zvziKYeBU3-gQ3S4t+DU-_uwDKvO_
> 4w(a)mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> I don't think it has to be done the way I propose so I don't see a strong
> need to change it. As long as it works with kc_locale that's fine.
>
> On 18 April 2018 at 01:17, Stan Silvert <ssilvert(a)redhat.com> wrote:
>
> > On 4/17/2018 3:07 PM, Stan Silvert wrote:
> > > On 4/17/2018 1:59 PM, Stian Thorgersen wrote:
> > >> For the account management console I think the correct approach is the
> > >> following:
> > >>
> > >> * Add an endpoint to account management service to allow setting the
> > >> user locale which the account management should call - it should not
> > >> re-direct to login back and do the whole login dance
> > >> * Change the way the account management console loads the messages -
> > >> it should load using a rest endpoint, not by injecting into the
> > >> index.ftl. That allows re-loading messages if the locale is changed
> > >> without having to do the login dance
> > > What is it about the "login dance" that causes a problem? It seems to
> > > do exactly what I need it to do, as long as I can pass in kc_locale.
> > I was thinking that I actually need the redirect in order to
> > re-initialize the welcome screen's localized text. The welcome screen
> > uses FreeMarker for localization. But you can't get back to the welcome
> > screen without logging out, so logout's redirect would take care of the
> > re-initialization of the welcome screen. Therefore, adding an endpoint
> > and reloading the messages in Angular would work.
> >
> > A new endpoint for this would:
> > * Set the cookie to the new locale
> > * Set the UserModel to the new locale
> > * Return the localized message bundle
> >
> > Then I would have to refactor all the language handling on the Angular
> > side. It would all just take a bit of time to implement. But if you
> > really think it has to be done that way we can do it.
> >
> > >
> > >>
> > >>
> > >> On 17 April 2018 at 15:59, Marek Posolda <mposolda(a)redhat.com
> > >> <mailto:mposolda@redhat.com>> wrote:
> > >>
> > >> On 17/04/18 15:00, Stan Silvert wrote:
> > >>
> > >> On 4/16/2018 1:51 PM, Stian Thorgersen wrote:
> > >>
> > >> kc_locale is only aimed at internal use. You should use
> > >> ui_locales
> > >> that's the publicly available param.
> > >>
> > >> The problem is that I need the server-side logic associated
> > with
> > >> kc_locale. kc_locale will update the cookie and update the
> > >> UserModel.
> > >> ui_locales is just a pass-through back to the application.
> > >>
> > >> So we can either add kc_locale as a login param in
> keycloak.js
> > >> or we can
> > >> add the server-side logic to ui_locales. The simplest is to
> > >> do the
> > >> former. But perhaps we should have been doing the latter all
> > >> along?
> > >>
> > >> IMO the ui_locales parameter shouldn't update the UserModel. It's
> > >> possible that there would be 2 different applications and both of
> > >> them will send different values of ui_locales parameter. In that
> > >> case, when user switch between application1 and application2 (on
> > >> each SSO login), there will be update to UserModel, which is not
> > >> good regarding performance IMO.
> > >>
> > >> I can see in LocaleHelper.getUserLocale that the order about how
> > >> the locale is resolved is:
> > >> 1. kc_locale parameter
> > >> 2. KEYCLOAK_LOCALE cookie
> > >> 3. UserModel attribute
> > >> 4. ui_locales query parameter
> > >> 5. Accept-Language header
> > >>
> > >> Is this order proper or not? AFAIK the first 3 items are used
> just
> > >> if user explicitly selects the language on Keycloak login screen
> > >> (or account mgmt screen). If we put ui_locales up, we will
> defacto
> > >> give the control to application to override the localization,
> > >> which user explicitly chosen on login screen. Do we want to do
> > >> that? Is it good regarding usability? I think that not, but maybe
> > >> I am wrong...
> > >>
> > >>
> > >> I think the current order is correct.
> > >>
> > >> 1. Change locale if user has explicitly made the change - kc_locale
> > >> should only be set when the user changes it manually through login
> pages
> > >> 2-3 Tries to figure out the users last pick
> > >> 4. Provided by the application as a hint for what locale the user may
> > >> want. It should not override the users explicitly set locale
> > >> 5. Accept-Language is supposed to give the users preferred locale.
> > >> However, this is often wrong and just defaults to en. Hence why it
> > >> comes last.
> > >>
> > >> There's been quite a lot of discussion to get this right in the past,
> > >> so I'm quite confident that the current logic works and it has been
> > >> confirmed by a surprising amount of folks. Well it was tweaked quite a
> > >> few times based on user feedback.
> > >>
> > >>
> > >> Marek
> > >>
> > >>
> > >> On 16 April 2018 at 16:06, Stan Silvert
> > >> <ssilvert(a)redhat.com <mailto:ssilvert@redhat.com>
> > >> <mailto:ssilvert@redhat.com <mailto:ssilvert@redhat.com
> >>>
> > >> wrote:
> > >>
> > >> OK.
> > >>
> > >> Does anyone object to adding kc_locale to the login
> > >> options on the
> > >> keycloak.js adapter?
> > >>
> > >>
> > >>
> > >> On 4/16/2018 2:45 AM, Stian Thorgersen wrote:
> > >>
> > >> It's a query param defined by OpenID Connect.
> See
> > >> http://openid.net/specs/openid-connect-core-1_0.html
> > >> <http://openid.net/specs/
> openid-connect-core-1_0.html>
> > >>
> > >> <http://openid.net/specs/
> openid-connect-core-1_0.html
> > >> <http://openid.net/specs/
> openid-connect-core-1_0.html
> > >>.
> > >> It allows
> > >> the application to pass a list of req locales in
> > >> case the
> > >> application knows it.
> > >>
> > >> When doing the redirect login flow the
> > >> applications should use
> > >> ui_locales. kc_locale is an internal param and
> > >> should really only
> > >> be used by the locale switcher on the login
> > screen.
> > >>
> > >> On 16 April 2018 at 02:44, Stan Silvert
> > >> <ssilvert(a)redhat.com <mailto:ssilvert@redhat.com>
> > >> <mailto:ssilvert@redhat.com
> > >> <mailto:ssilvert@redhat.com>>> wrote:
> > >>
> > >> Does anyone know what ui_locales is actually
> > >> used for?
> > >>
> > >> I can't find usages except for in the
> > testsuite.
> > >>
> > >> The query param used to change locale is
> > >> kc_locale. Should
> > >> ui_locales
> > >> deprecated?
> > >>
> > >> Stan
> > >>
> > >> _____________________________
> > __________________
> > >> keycloak-dev mailing list
> > >> keycloak-dev(a)lists.jboss.org
> > >> <mailto:keycloak-dev@lists.jboss.org>
> > >> <mailto:keycloak-dev@lists.jboss.org
> > >> <mailto:keycloak-dev@lists.jboss.org>>
> > >> https://lists.jboss.org/
> mailman/listinfo/keycloak-dev
> > >> <https://lists.jboss.org/
> mailman/listinfo/keycloak-dev
> > >
> > >>
> > >> <https://lists.jboss.org/
> > mailman/listinfo/keycloak-dev
> > >> <https://lists.jboss.org/
> mailman/listinfo/keycloak-dev
> > >>
> > >>
> > >>
> > >>
> > >> _______________________________________________
> > >> keycloak-dev mailing list
> > >> keycloak-dev(a)lists.jboss.org <mailto:keycloak-dev@lists.
> > jboss.org>
> > >> https://lists.jboss.org/mailman/listinfo/keycloak-dev
> > >> <https://lists.jboss.org/mailman/listinfo/keycloak-dev>
> > >>
> > >>
> > >>
> > >>
> > > _______________________________________________
> > > keycloak-dev mailing list
> > > keycloak-dev(a)lists.jboss.org
> > > https://lists.jboss.org/mailman/listinfo/keycloak-dev
> >
> >
> > _______________________________________________
> > keycloak-dev mailing list
> > keycloak-dev(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/keycloak-dev
> >
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 18 Apr 2018 08:19:58 -0400
> From: Stan Silvert <ssilvert(a)redhat.com>
> Subject: Re: [keycloak-dev] ui_locales query parameter?
> To: stian(a)redhat.com
> Cc: keycloak-dev <keycloak-dev(a)lists.jboss.org>
> Message-ID: <c78a0305-d893-7fd6-e14a-2445cc983238(a)redhat.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> On 4/18/2018 7:46 AM, Stian Thorgersen wrote:
> > I don't think it has to be done the way I propose so I don't see a
> > strong need to change it. As long as it works with kc_locale that's fine.
> OK.? I'll add the kc_locale param to keycloak.js.? It might be useful
> for others as well.
>
> >
> > On 18 April 2018 at 01:17, Stan Silvert <ssilvert(a)redhat.com
> > <mailto:ssilvert@redhat.com>> wrote:
> >
> > On 4/17/2018 3:07 PM, Stan Silvert wrote:
> > > On 4/17/2018 1:59 PM, Stian Thorgersen wrote:
> > >> For the account management console I think the correct approach
> > is the
> > >> following:
> > >>
> > >> * Add an endpoint to account management service to allow
> > setting the
> > >> user locale which the account management should call - it
> > should not
> > >> re-direct to login back and do the whole login dance
> > >> * Change the way the account management console loads the
> > messages -
> > >> it should load using a rest endpoint, not by injecting into the
> > >> index.ftl. That allows re-loading messages if the locale is
> changed
> > >> without having to do the login dance
> > > What is it about the "login dance" that causes a problem?? It
> > seems to
> > > do exactly what I need it to do, as long as I can pass in
> kc_locale.
> > I was thinking that I actually need the redirect in order to
> > re-initialize the welcome screen's localized text.? The welcome
> > screen
> > uses FreeMarker for localization.? But you can't get back to the
> > welcome
> > screen without logging out, so logout's redirect would take care
> > of the
> > re-initialization of the welcome screen. Therefore, adding an
> > endpoint
> > and reloading the messages in Angular would work.
> >
> > A new endpoint for this would:
> > * Set the cookie to the new locale
> > * Set the UserModel to the new locale
> > * Return the localized message bundle
> >
> > Then I would have to refactor all the language handling on the
> > Angular
> > side.? It would all just take a bit of time to implement. But if you
> > really think it has to be done that way we can do it.
> >
> > >
> > >>
> > >>
> > >> On 17 April 2018 at 15:59, Marek Posolda <mposolda(a)redhat.com
> > <mailto:mposolda@redhat.com>
> > >> <mailto:mposolda@redhat.com <mailto:mposolda@redhat.com>>> wrote:
> > >>
> > >>? ? ? On 17/04/18 15:00, Stan Silvert wrote:
> > >>
> > >>? ? ? ? ? On 4/16/2018 1:51 PM, Stian Thorgersen wrote:
> > >>
> > >>? ? ? ? ? ? ? kc_locale is only aimed at internal use. You
> > should use
> > >>? ? ? ? ? ? ? ui_locales
> > >>? ? ? ? ? ? ? that's the publicly available param.
> > >>
> > >>? ? ? ? ? The problem is that I need the server-side logic
> > associated with
> > >>? ? ? ? ? kc_locale.? kc_locale will update the cookie and
> > update the
> > >>? ? ? ? ? UserModel.
> > >>? ? ? ? ? ui_locales is just a pass-through back to the
> application.
> > >>
> > >>? ? ? ? ? So we can either add kc_locale as a login param in
> > keycloak.js
> > >>? ? ? ? ? or we can
> > >>? ? ? ? ? add the server-side logic to ui_locales.? The simplest
> > is to
> > >>? ? ? ? ? do the
> > >>? ? ? ? ? former.? But perhaps we should have been doing the
> > latter all
> > >>? ? ? ? ? along?
> > >>
> > >>? ? ? IMO the ui_locales parameter shouldn't update the
> > UserModel. It's
> > >>? ? ? possible that there would be 2 different applications and
> > both of
> > >>? ? ? them will send different values of ui_locales parameter.
> > In that
> > >>? ? ? case, when user switch between application1 and
> > application2 (on
> > >>? ? ? each SSO login), there will be update to UserModel, which
> > is not
> > >>? ? ? good regarding performance IMO.
> > >>
> > >>? ? ? I can see in LocaleHelper.getUserLocale that the order
> > about how
> > >>? ? ? the locale is resolved is:
> > >>? ? ? 1. kc_locale parameter
> > >>? ? ? 2. KEYCLOAK_LOCALE cookie
> > >>? ? ? 3. UserModel attribute
> > >>? ? ? 4. ui_locales query parameter
> > >>? ? ? 5. Accept-Language header
> > >>
> > >>? ? ? Is this order proper or not? AFAIK the first 3 items are
> > used just
> > >>? ? ? if user explicitly selects the language on Keycloak login
> > screen
> > >>? ? ? (or account mgmt screen). If we put ui_locales up, we will
> > defacto
> > >>? ? ? give the control to application to override the localization,
> > >>? ? ? which user explicitly chosen on login screen. Do we want to
> do
> > >>? ? ? that? Is it good regarding usability? I think that not,
> > but maybe
> > >>? ? ? I am wrong...
> > >>
> > >>
> > >> I think the current order is correct.
> > >>
> > >> 1. Change locale if user has explicitly made the change -
> kc_locale
> > >> should only be set when the user changes it manually through
> > login pages
> > >> 2-3 Tries to figure out the users last pick
> > >> 4. Provided by the application as a hint for what locale the
> > user may
> > >> want. It should not override the users explicitly set locale
> > >> 5. Accept-Language is supposed to give the users preferred locale.
> > >> However, this is often wrong and just defaults to en. Hence why it
> > >> comes last.
> > >>
> > >> There's been quite a lot of discussion to get this right in the
> > past,
> > >> so I'm quite confident that the current logic works and it has
> been
> > >> confirmed by a surprising amount of folks. Well it was tweaked
> > quite a
> > >> few times based on user feedback.
> > >>
> > >>
> > >>? ? ? Marek
> > >>
> > >>
> > >>? ? ? ? ? ? ? On 16 April 2018 at 16:06, Stan Silvert
> > >>? ? ? ? ? ? ? <ssilvert(a)redhat.com <mailto:ssilvert@redhat.com>
> > <mailto:ssilvert@redhat.com <mailto:ssilvert@redhat.com>>
> > >>? ? ? ? ? ? ? <mailto:ssilvert@redhat.com
> > <mailto:ssilvert@redhat.com> <mailto:ssilvert@redhat.com
> > <mailto:ssilvert@redhat.com>>>>
> > >>? ? ? ? ? ? ? wrote:
> > >>
> > >>? ? ? ? ? ? ? ? ? ?OK.
> > >>
> > >>? ? ? ? ? ? ? ? ? ?Does anyone object to adding kc_locale to the
> > login
> > >>? ? ? ? ? ? ? options on the
> > >>? ? ? ? ? ? ? ? ? ?keycloak.js adapter?
> > >>
> > >>
> > >>
> > >>? ? ? ? ? ? ? ? ? ?On 4/16/2018 2:45 AM, Stian Thorgersen wrote:
> > >>
> > >>? ? ? ? ? ? ? ? ? ? ? ?It's a query param defined by OpenID
> > Connect. See
> > >> http://openid.net/specs/openid-connect-core-1_0.html
> > <http://openid.net/specs/openid-connect-core-1_0.html>
> > >>? ? ? ? ? ? ? ? ?
> > <http://openid.net/specs/openid-connect-core-1_0.html
> > <http://openid.net/specs/openid-connect-core-1_0.html>>
> > >>
> > >>? ? ? ? ? ? ? ? ?
> > ?<http://openid.net/specs/openid-connect-core-1_0.html
> > <http://openid.net/specs/openid-connect-core-1_0.html>
> > >>? ? ? ? ? ? ? ? ?
> > <http://openid.net/specs/openid-connect-core-1_0.html
> > <http://openid.net/specs/openid-connect-core-1_0.html>>>.
> > >>? ? ? ? ? ? ? ? ? It allows
> > >>? ? ? ? ? ? ? ? ? ? ? ?the application to pass a list of req
> > locales in
> > >>? ? ? ? ? ? ? ? ? case the
> > >>? ? ? ? ? ? ? ? ? ? ? ?application knows it.
> > >>
> > >>? ? ? ? ? ? ? ? ? ? ? ?When doing the redirect login flow the
> > >>? ? ? ? ? ? ? ? ? applications should use
> > >>? ? ? ? ? ? ? ? ? ? ? ?ui_locales. kc_locale is an internal
> > param and
> > >>? ? ? ? ? ? ? ? ? should really only
> > >>? ? ? ? ? ? ? ? ? ? ? ?be used by the locale switcher on the
> > login screen.
> > >>
> > >>? ? ? ? ? ? ? ? ? ? ? ?On 16 April 2018 at 02:44, Stan Silvert
> > >>? ? ? ? ? ? ? ? ? <ssilvert(a)redhat.com
> > <mailto:ssilvert@redhat.com> <mailto:ssilvert@redhat.com
> > <mailto:ssilvert@redhat.com>>
> > >>? ? ? ? ? ? ? ? ? ? ? ?<mailto:ssilvert@redhat.com
> > <mailto:ssilvert@redhat.com>
> > >>? ? ? ? ? ? ? ? ? <mailto:ssilvert@redhat.com <mailto:
> ssilvert(a)redhat.com>>>> wrote:
> > >>
> > >>? ? ? ? ? ? ? ? ? ? ? ? ? ?Does anyone know what ui_locales is
> > actually
> > >>? ? ? ? ? ? ? ? ? used for?
> > >>
> > >>? ? ? ? ? ? ? ? ? ? ? ? ? ?I can't find usages except for in the
> > testsuite.
> > >>
> > >>? ? ? ? ? ? ? ? ? ? ? ? ? ?The query param used to change locale is
> > >>? ? ? ? ? ? ? ? ? kc_locale.? Should
> > >>? ? ? ? ? ? ? ? ? ? ? ? ? ?ui_locales
> > >>? ? ? ? ? ? ? ? ? ? ? ? ? ?deprecated?
> > >>
> > >>? ? ? ? ? ? ? ? ? ? ? ? ? ?Stan
> > >>
> > >> ?_______________________________________________
> > >>? ? ? ? ? ? ? ? ? ? ? ? ? ?keycloak-dev mailing list
> > >> keycloak-dev(a)lists.jboss.org <mailto:keycloak-dev@lists.jboss.org
> >
> > >>? ? ? ? ? ? ? ? ? <mailto:keycloak-dev@lists.jboss.org
> > <mailto:keycloak-dev@lists.jboss.org>>
> > >>? ? ? ? ? ? ? ? ? ? ? ? ? ?<mailto:keycloak-dev@lists.jboss.org
> > <mailto:keycloak-dev@lists.jboss.org>
> > >>? ? ? ? ? ? ? ? ? <mailto:keycloak-dev@lists.jboss.org <mailto:
> keycloak-dev(a)lists.jboss.org>>>
> > >> https://lists.jboss.org/mailman/listinfo/keycloak-dev
> > <https://lists.jboss.org/mailman/listinfo/keycloak-dev>
> > >>? ? ? ? ? ? ? ? ?
> > <https://lists.jboss.org/mailman/listinfo/keycloak-dev
> > <https://lists.jboss.org/mailman/listinfo/keycloak-dev>>
> > >>
> > >>? ? ? ? ? ? ? ? ?
> > ?<https://lists.jboss.org/mailman/listinfo/keycloak-dev
> > <https://lists.jboss.org/mailman/listinfo/keycloak-dev>
> > >>? ? ? ? ? ? ? ? ?
> > <https://lists.jboss.org/mailman/listinfo/keycloak-dev
> > <https://lists.jboss.org/mailman/listinfo/keycloak-dev>>>
> > >>
> > >>
> > >>
> > >>? ? ? ? ? _______________________________________________
> > >>? ? ? ? ? keycloak-dev mailing list
> > >> keycloak-dev(a)lists.jboss.org
> > <mailto:keycloak-dev@lists.jboss.org>
> > <mailto:keycloak-dev@lists.jboss.org
> > <mailto:keycloak-dev@lists.jboss.org>>
> > >> https://lists.jboss.org/mailman/listinfo/keycloak-dev
> > <https://lists.jboss.org/mailman/listinfo/keycloak-dev>
> > >>? ? ? ? ? <https://lists.jboss.org/mailman/listinfo/keycloak-dev
> > <https://lists.jboss.org/mailman/listinfo/keycloak-dev>>
> > >>
> > >>
> > >>
> > >>
> > > _______________________________________________
> > > keycloak-dev mailing list
> > > keycloak-dev(a)lists.jboss.org <mailto:keycloak-dev@lists.jboss.org>
> > > https://lists.jboss.org/mailman/listinfo/keycloak-dev
> > <https://lists.jboss.org/mailman/listinfo/keycloak-dev>
> >
> >
> > _______________________________________________
> > keycloak-dev mailing list
> > keycloak-dev(a)lists.jboss.org <mailto:keycloak-dev@lists.jboss.org>
> > https://lists.jboss.org/mailman/listinfo/keycloak-dev
> > <https://lists.jboss.org/mailman/listinfo/keycloak-dev>
> >
> >
>
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 18 Apr 2018 14:37:41 +0200
> From: Stian Thorgersen <sthorger(a)redhat.com>
> Subject: Re: [keycloak-dev] ui_locales query parameter?
> To: Stan Silvert <ssilvert(a)redhat.com>
> Cc: keycloak-dev <keycloak-dev(a)lists.jboss.org>
> Message-ID:
> <CAJgngAeSuTouzjuAqAS3mCrQMGt9on090qUe90qvA452PS72kQ@mail.
> gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Not sure it should be added directly to keycloak.js as it's not strictly a
> supported param. Either you should just use it from keycloak.js, but not
> make it a direct option, or we should add it as a supported param. In the
> latter case we should probably document it.
>
> On 18 April 2018 at 14:19, Stan Silvert <ssilvert(a)redhat.com> wrote:
>
> > On 4/18/2018 7:46 AM, Stian Thorgersen wrote:
> >
> > I don't think it has to be done the way I propose so I don't see a strong
> > need to change it. As long as it works with kc_locale that's fine.
> >
> > OK. I'll add the kc_locale param to keycloak.js. It might be useful for
> > others as well.
> >
> >
> >
> > On 18 April 2018 at 01:17, Stan Silvert <ssilvert(a)redhat.com> wrote:
> >
> >> On 4/17/2018 3:07 PM, Stan Silvert wrote:
> >> > On 4/17/2018 1:59 PM, Stian Thorgersen wrote:
> >> >> For the account management console I think the correct approach is
> the
> >> >> following:
> >> >>
> >> >> * Add an endpoint to account management service to allow setting the
> >> >> user locale which the account management should call - it should not
> >> >> re-direct to login back and do the whole login dance
> >> >> * Change the way the account management console loads the messages -
> >> >> it should load using a rest endpoint, not by injecting into the
> >> >> index.ftl. That allows re-loading messages if the locale is changed
> >> >> without having to do the login dance
> >> > What is it about the "login dance" that causes a problem? It seems to
> >> > do exactly what I need it to do, as long as I can pass in kc_locale.
> >> I was thinking that I actually need the redirect in order to
> >> re-initialize the welcome screen's localized text. The welcome screen
> >> uses FreeMarker for localization. But you can't get back to the welcome
> >> screen without logging out, so logout's redirect would take care of the
> >> re-initialization of the welcome screen. Therefore, adding an endpoint
> >> and reloading the messages in Angular would work.
> >>
> >> A new endpoint for this would:
> >> * Set the cookie to the new locale
> >> * Set the UserModel to the new locale
> >> * Return the localized message bundle
> >>
> >> Then I would have to refactor all the language handling on the Angular
> >> side. It would all just take a bit of time to implement. But if you
> >> really think it has to be done that way we can do it.
> >>
> >> >
> >> >>
> >> >>
> >> >> On 17 April 2018 at 15:59, Marek Posolda <mposolda(a)redhat.com
> >> >> <mailto:mposolda@redhat.com>> wrote:
> >> >>
> >> >> On 17/04/18 15:00, Stan Silvert wrote:
> >> >>
> >> >> On 4/16/2018 1:51 PM, Stian Thorgersen wrote:
> >> >>
> >> >> kc_locale is only aimed at internal use. You should use
> >> >> ui_locales
> >> >> that's the publicly available param.
> >> >>
> >> >> The problem is that I need the server-side logic associated
> >> with
> >> >> kc_locale. kc_locale will update the cookie and update the
> >> >> UserModel.
> >> >> ui_locales is just a pass-through back to the application.
> >> >>
> >> >> So we can either add kc_locale as a login param in
> keycloak.js
> >> >> or we can
> >> >> add the server-side logic to ui_locales. The simplest is to
> >> >> do the
> >> >> former. But perhaps we should have been doing the latter
> all
> >> >> along?
> >> >>
> >> >> IMO the ui_locales parameter shouldn't update the UserModel.
> It's
> >> >> possible that there would be 2 different applications and both
> of
> >> >> them will send different values of ui_locales parameter. In that
> >> >> case, when user switch between application1 and application2 (on
> >> >> each SSO login), there will be update to UserModel, which is not
> >> >> good regarding performance IMO.
> >> >>
> >> >> I can see in LocaleHelper.getUserLocale that the order about how
> >> >> the locale is resolved is:
> >> >> 1. kc_locale parameter
> >> >> 2. KEYCLOAK_LOCALE cookie
> >> >> 3. UserModel attribute
> >> >> 4. ui_locales query parameter
> >> >> 5. Accept-Language header
> >> >>
> >> >> Is this order proper or not? AFAIK the first 3 items are used
> just
> >> >> if user explicitly selects the language on Keycloak login screen
> >> >> (or account mgmt screen). If we put ui_locales up, we will
> defacto
> >> >> give the control to application to override the localization,
> >> >> which user explicitly chosen on login screen. Do we want to do
> >> >> that? Is it good regarding usability? I think that not, but
> maybe
> >> >> I am wrong...
> >> >>
> >> >>
> >> >> I think the current order is correct.
> >> >>
> >> >> 1. Change locale if user has explicitly made the change - kc_locale
> >> >> should only be set when the user changes it manually through login
> >> pages
> >> >> 2-3 Tries to figure out the users last pick
> >> >> 4. Provided by the application as a hint for what locale the user may
> >> >> want. It should not override the users explicitly set locale
> >> >> 5. Accept-Language is supposed to give the users preferred locale.
> >> >> However, this is often wrong and just defaults to en. Hence why it
> >> >> comes last.
> >> >>
> >> >> There's been quite a lot of discussion to get this right in the past,
> >> >> so I'm quite confident that the current logic works and it has been
> >> >> confirmed by a surprising amount of folks. Well it was tweaked quite
> a
> >> >> few times based on user feedback.
> >> >>
> >> >>
> >> >> Marek
> >> >>
> >> >>
> >> >> On 16 April 2018 at 16:06, Stan Silvert
> >> >> <ssilvert(a)redhat.com <mailto:ssilvert@redhat.com>
> >> >> <mailto:ssilvert@redhat.com <mailto:ssilvert@redhat.com
> >> >>>
> >> >> wrote:
> >> >>
> >> >> OK.
> >> >>
> >> >> Does anyone object to adding kc_locale to the login
> >> >> options on the
> >> >> keycloak.js adapter?
> >> >>
> >> >>
> >> >>
> >> >> On 4/16/2018 2:45 AM, Stian Thorgersen wrote:
> >> >>
> >> >> It's a query param defined by OpenID Connect.
> See
> >> >> http://openid.net/specs/
> openid-connect-core-1_0.html
> >> >> <http://openid.net/specs/
> openid-connect-core-1_0.html
> >> >
> >> >>
> >> >> <http://openid.net/specs/open
> >> id-connect-core-1_0.html
> >> >> <http://openid.net/specs/
> openid-connect-core-1_0.html
> >> >>.
> >> >> It allows
> >> >> the application to pass a list of req locales
> in
> >> >> case the
> >> >> application knows it.
> >> >>
> >> >> When doing the redirect login flow the
> >> >> applications should use
> >> >> ui_locales. kc_locale is an internal param and
> >> >> should really only
> >> >> be used by the locale switcher on the login
> >> screen.
> >> >>
> >> >> On 16 April 2018 at 02:44, Stan Silvert
> >> >> <ssilvert(a)redhat.com <mailto:ssilvert@redhat.com>
> >> >> <mailto:ssilvert@redhat.com
> >> >> <mailto:ssilvert@redhat.com>>> wrote:
> >> >>
> >> >> Does anyone know what ui_locales is
> actually
> >> >> used for?
> >> >>
> >> >> I can't find usages except for in the
> >> testsuite.
> >> >>
> >> >> The query param used to change locale is
> >> >> kc_locale. Should
> >> >> ui_locales
> >> >> deprecated?
> >> >>
> >> >> Stan
> >> >>
> >> >> _____________________________
> >> __________________
> >> >> keycloak-dev mailing list
> >> >> keycloak-dev(a)lists.jboss.org
> >> >> <mailto:keycloak-dev@lists.jboss.org>
> >> >> <mailto:keycloak-dev@lists.jboss.org
> >> >> <mailto:keycloak-dev@lists.jboss.org>>
> >> >> https://lists.jboss.org/
> mailman/listinfo/keycloak-dev
> >> >> <https://lists.jboss.org/mailm
> >> an/listinfo/keycloak-dev>
> >> >>
> >> >> <https://lists.jboss.org/mail
> >> man/listinfo/keycloak-dev
> >> >> <https://lists.jboss.org/mailm
> >> an/listinfo/keycloak-dev>>
> >> >>
> >> >>
> >> >>
> >> >> _______________________________________________
> >> >> keycloak-dev mailing list
> >> >> keycloak-dev(a)lists.jboss.org <mailto:keycloak-dev@lists.jbo
> >> ss.org>
> >> >> https://lists.jboss.org/mailman/listinfo/keycloak-dev
> >> >> <https://lists.jboss.org/mailman/listinfo/keycloak-dev>
> >> >>
> >> >>
> >> >>
> >> >>
> >> > _______________________________________________
> >> > keycloak-dev mailing list
> >> > keycloak-dev(a)lists.jboss.org
> >> > https://lists.jboss.org/mailman/listinfo/keycloak-dev
> >>
> >>
> >> _______________________________________________
> >> keycloak-dev mailing list
> >> keycloak-dev(a)lists.jboss.org
> >> https://lists.jboss.org/mailman/listinfo/keycloak-dev
> >>
> >
> >
> >
>
>
> ------------------------------
>
> _______________________________________________
> keycloak-dev mailing list
> keycloak-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/keycloak-dev
>
> End of keycloak-dev Digest, Vol 58, Issue 16
> ********************************************
>
8 years
Keycloak Questionnaire
by Stian Thorgersen
We would love to gather some information on who is using Keycloak and how
it is being used. With that intent we have created a form here
https://goo.gl/forms/TRSmCCU6eX25prhH2
I would greatly appreciate if as many as possible can fill this in.
Thanks,
Stian Thorgersen
Keycloak Project Lead
8 years
ui_locales query parameter?
by Stan Silvert
Does anyone know what ui_locales is actually used for?
I can't find usages except for in the testsuite.
The query param used to change locale is kc_locale. Should ui_locales
deprecated?
Stan
8 years
Reference users
by Stian Thorgersen
We would like to gather some information on what companies are currently
using or are planning to use Keycloak in production.
We are also looking for public references.
If you are able to share your story please contact me off list.
8 years
Pushing Claims from Policy Enforcer
by Pedro Igor Silva
Hi,
I'm currently working on https://issues.jboss.org/browse/KEYCLOAK-4903.
This is all about allowing applications to push arbitrary claims to
Keycloak prior to evaluating permissions on the server. A simple example to
illustrate the idea: a request arrives you extract what you want from there
(parameters, headers, etc) and "push" the information from the request as
claims in order to evaluate your permissions.
There are endless possibilities on what you can push and how.
>From a design perspective, I was thinking about providing a SPI on the
adapter side (as simple as using ServiceLoader) to load built-in and
user-defined "claim information points". Examples of built-in
implementations would be:
* Extract parameters
* Extract headers
* Extract path parameters
* Extract cookies
* Invoke an external "policy information point"
What do you think ?
Regards.
Pedro Igor
8 years
