What I meant was with the old functionality "role scope mappings" you could control which roles a client could get using a 1:1 mapping from scope to role and then 1:n with composite roles OR you could disable controlling this by simply allowing full scopes for a client. With the new functionality "client scopes" you can control which roles AND other mapped claims a client can get using an explicit 1:n mapping BUT you cannot simply allow all scopes for a client, right?

That’s why I thought it could make sense to just add that switch to the new "client scopes" tab and remove the current "scope" tab completely, at least in the long run... Best regards, Sebastian Mit freundlichen Grüßen / Best regards Dr.-Ing. Sebastian Schuster Engineering and Support (INST/ESY1) Bosch Software Innovations GmbH | Ullsteinstr. 128 | 12109 Berlin | GERMANY | www.bosch-si.com Tel. +49 30 726112-485 | Fax +49 30 726112-100 | Sebastian.Schuster(a)bosch-si.com Sitz: Berlin, Registergericht: Amtsgericht Charlottenburg; HRB 148411 B Aufsichtsratsvorsitzender: Dr.-Ing. Thorsten Lücke; Geschäftsführung: Dr. Stefan Ferber, Michael Hahn -----Original Message----- From: Marek Posolda [mailto:mposolda@redhat.com] Sent: Freitag, 16. März 2018 14:19 To: Schuster Sebastian (INST/ESY1) <Sebastian.Schuster(a)bosch-si.com>; keycloak-dev(a)lists.jboss.org Subject: Re: [keycloak-dev] Initial client scopes PR On 16/03/18 09:15, Schuster Sebastian (INST/ESY1) wrote: > Doesn't the current client scope functionality cover everything that was possible on the scopes tab, except for the ability to simply allow all scopes for a client? Not sure what you mean. I am probably lost in what "scope" you are talking about :) Client scope (new thing, which is not yet in Keycloak master) or "Role scope mappings" (functionality which is under "Scopes" tab of client or clientTemplate in current master?) But at least for now with my PR applied, clients still have "Scope" tab on themselves as it's still possible to grant "Role scope mappings" directly to client. But clients will also inherit "Role scope mappings" from all client scopes, which are assigned to them. Marek > Then my proposal would be to add that functionality to the "client scope" tab and call it "scope" tab again, and maybe rename the menu on the left to "scope mappings" > or also just "scopes". > > Best regards, > Sebastian > > > Mit freundlichen Grüßen / Best regards > > Dr.-Ing. Sebastian Schuster > > Engineering and Support (INST/ESY1) > Bosch Software Innovations GmbH | Ullsteinstr. 128 | 12109 Berlin | > GERMANY | www.bosch-si.com Tel. +49 30 726112-485 | Fax +49 30 > 726112-100 | Sebastian.Schuster(a)bosch-si.com > > Sitz: Berlin, Registergericht: Amtsgericht Charlottenburg; HRB 148411 > B > Aufsichtsratsvorsitzender: Dr.-Ing. Thorsten Lücke; Geschäftsführung: > Dr. Stefan Ferber, Michael Hahn > > > > > -----Original Message----- > From: Marek Posolda [mailto:mposolda@redhat.com] > Sent: Freitag, 16. März 2018 08:48 > To: Schuster Sebastian (INST/ESY1) <Sebastian.Schuster(a)bosch-si.com>; > keycloak-dev(a)lists.jboss.org > Subject: Re: [keycloak-dev] Initial client scopes PR > > It's not yet clear... Maybe we can rename tab to "Role Scopes"? Will > it be clearer or even more confusing? :) > > Marek > > On 15/03/18 13:13, Schuster Sebastian (INST/ESY1) wrote: >> Is the long-term goal to make the "Scopes" tab for clients go away? Because currently it's a bit confusing both are there... >> >> Best regards, >> Sebastian >> >> Mit freundlichen Grüßen / Best regards >> >> Dr.-Ing. Sebastian Schuster >> >> Engineering and Support (INST/ESY1) >> Bosch Software Innovations GmbH | Ullsteinstr. 128 | 12109 Berlin | >> GERMANY | www.bosch-si.com Tel. +49 30 726112-485 | Fax +49 30 >> 726112-100 | Sebastian.Schuster(a)bosch-si.com >> >> Sitz: Berlin, Registergericht: Amtsgericht Charlottenburg; HRB 148411 >> B >> Aufsichtsratsvorsitzender: Dr.-Ing. Thorsten Lücke; Geschäftsführung: >> Dr. Stefan Ferber, Michael Hahn >> >> >> >> >> -----Original Message----- >> From: keycloak-dev-bounces(a)lists.jboss.org >> [mailto:keycloak-dev-bounces@lists.jboss.org] On Behalf Of Marek >> Posolda >> Sent: Mittwoch, 14. März 2018 18:47 >> To: keycloak-dev(a)lists.jboss.org >> Subject: [keycloak-dev] Initial client scopes PR >> >> Hi, >> >> I've finally send PR https://github.com/keycloak/keycloak/pull/5076 for the first iteration of client scopes. I will talk on tomorrow call about the details and still need to write some more automated tests. But I am seing PR now if someone wants to take a look. >> >> Summary: >> >> - Client Templates were renamed to "Client Scopes". Some things were removed from the client template admin console (EG. Theme setting added recently). Also I've removed some ClientTemplate model properties, which were never used. Client Scope still has list of protocol mappers and list of "Scopes" (Roles scope mappings). >> >> >> - There is new tab "Client Scopes" on client. Here you can assign client scopes to client. Each client has 2 types of client scopes: >> -- Default client scopes -- Those client scopes are automatically applied when login with the client. Their protocol mappers and "Role scope mappings" are always used. >> -- Optional client scopes -- Those client scopes are applicable just for OIDC clients. They are used just if they are requested by "scope" >> parameter during login >> >> >> - Under "Client scopes", there is new tab "Default Client Scopes" . This allows to specify "Realm default client scopes" and "Realm optional client scopes". The scopes configured here will be added as default/optional scopes to new clients. Client can override this (Remove those defaults and add some different client scopes). So it works similarly to Default Roles. >> >> >> - Roles don't have "Scope Param Required" flag anymore. Protocol mappers don't have "Consent required" and "Consent text" anymore. Client scopes don't have "Full scope allowed" flag. But clients still have "Full scope allowed" flag for now and it's still ON by default for newly created clients. >> >> - There are few builtin client scopes added to each realm. There are >> 4 claims scopes defined in OIDC specification and those are added by >> default: "profile", "email", "address" and "phone" with the protocol mappers corresponding to the claims described in OIDC specification [1]. >> -- The "profile" and "email" are configured as default scopes and hence are automatically added to new clients. >> -- The "phone" and "address" are configured as optional scopes by default. >> -- The clients now doesn't have any protocolMappers added by default when they are created. I've added "profile" and "email" as default scopes due it's most close to the previous default protocolMappers we had. >> >> - For SAML, there is "role_list" default client scope, containing just 1 protocol mapper "role list". So both OIDC and SAML clients don't have any protocol mappers by default, it's driven by client scopes now by default. >> >> - There is "offline_access" OIDC client scope, which is optional scope by default. This scope contains just "offline_access" realm role. Due the fact, that parameter "Scope Param Required" was removed from RoleModel, the "offline_access" role is now automatically available in tokens for clients with "Full Scope Allowed", even if no offline tokens was requsted. But I don't think it's big issue besides a bit bigger token. Same also already applies for uma_authorization and some other built-in roles. The fact, that offline token is requested is now driven by "offline_access" scope. But user should still have "offline_access" >> role to be able to receive offline token. >> >> Consent changes: >> - Consent screen now doesn't display protocolMappers (claims) and roles, but instead it displays just client scopes. So by default, the consent screen contains 2 items "User profile" and "Email address", which correspond to the "profile" and "email" OIDC scopes. >> >> - There can be still the case, when client has some protocolMappers or role scope mappings defined on itself. So I've added flag "Display On Consent Screen" on clients (It's OFF by default) to specify if some message should be shown on consent screen about claims dedicated directly to client itself. It's useful especially when client doesn't have any client scopes as the consent screen wouldn't be displayed in that case. >> >> - During this refactoring, I've tried to do some cleanup we discussed before, so I've removed protocolMappers and roles from clientSession. >> Instead I've added clientScopes to refresh token. During refreshing token, it's checked that user still has all the consents, which are in the refresh token. So in case that user revoked consents in the meantime, the token refresh will fail. ProtocolMappers and scoped roles are always re-computed from the clientScopes. So if for example another claim was added to scope "profile", it will automatically be applied after refreshed token. I don't see an issue with that. User approved on consent screen scope "profile" and he may not be concerned what claims/scoped roles are in profile. >> >> - Migration: In the end I did not change existing clients and did not remove protocolMappers from them and didn't add default/optional client scopes to them. The only exception is "offline_access" profile, which is added as optional to all clients, which had scope to "offline_access" >> role. Consents are not migrated - again with the only exception being "offline_access" consent, so refreshing offline tokens from previous version still works. The new consent screen is something quite different than previous one, so makes sense to show it to users again when they want to login, even if they approved protocolMappers for the previous version. >> >> Sorry for long email and long PR :) More tomorrow... >> >> >> [1] http://openid.net/specs/openid-connect-core-1_0.html#ScopeClaims >> >> Marek >> >> _______________________________________________ >> keycloak-dev mailing list >> keycloak-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/keycloak-dev