6:17 p.m.
Hi all,
We are trying to integrate KeyCloak with GuardianKey. However, we have
doubts related to the best way to do this and the best point in the
KeyCloak’s code for this integration.
GuardianKey is a service to protect systems against authentication attacks.
It uses Machine Learning and analyses the user's behavior, threat
intelligence and psychometrics (or behavioral biometrics). The protected
system (in the concrete case, KeyCloak) must send an event via REST for the
GuardianKey on each login attempt. More info at https://guardiankey.io .
The best way to integrate would be on having a hook in the procedure that
process the user credentials submission in KeyCloak (the script that
receives the POST), something such as:
if(<POST IN AUTH FORM>) {
boolean loginFailed = checkLoginInKeyCloak();
GuardianKeyEvent event = createEventForGuardianKey(username,loginFailed);
boolean GuardianKeyValidation = checkGuardianKeyViaREST(event);
if(GuardianKeyValidation){
// Allow access
} else {
// Deny access
}
}
Where is the best place to create this integration? Is there a way to
create a hook for this purpose? Should we create an extension?
Any help is welcome.
Thank you in advance.
Best regards,
Paulo Angelo
8:46 p.m.
Hi Paulo,
IMO the simplest way to do this is with an Authenticator Provider. Please
see here:
https://www.keycloak.org/docs/latest/server_development/index.html#implem...
.
In the authenticate method you can call the GuardianKey and, depending on
the result, you call a context.success () or context.failure ().
Like this:
public void authenticate(AuthenticationFlowContext context) {
...
if(!GuardianKeyValidation){
Response challenge = context.form()
.setError("something")
.createForm("error_page.ftl");
context.failureChallenge(AuthenticationFlowError.INVALID_CREDENTIALS,
challenge);
return;
}
...
context.success();
}
Aléxis
Em dom, 3 de fev de 2019 às 15:38, Paulo Angelo <pa(a)pauloangelo.com>
escreveu:
Hi all,
We are trying to integrate KeyCloak with GuardianKey. However, we have
doubts related to the best way to do this and the best point in the
KeyCloak’s code for this integration.
GuardianKey is a service to protect systems against authentication attacks.
It uses Machine Learning and analyses the user's behavior, threat
intelligence and psychometrics (or behavioral biometrics). The protected
system (in the concrete case, KeyCloak) must send an event via REST for the
GuardianKey on each login attempt. More info at https://guardiankey.io .
The best way to integrate would be on having a hook in the procedure that
process the user credentials submission in KeyCloak (the script that
receives the POST), something such as:
if(<POST IN AUTH FORM>) {
boolean loginFailed = checkLoginInKeyCloak();
GuardianKeyEvent event = createEventForGuardianKey(username,loginFailed);
boolean GuardianKeyValidation = checkGuardianKeyViaREST(event);
if(GuardianKeyValidation){
// Allow access
} else {
// Deny access
}
}
Where is the best place to create this integration? Is there a way to
create a hook for this purpose? Should we create an extension?
Any help is welcome.
Thank you in advance.
Best regards,
Paulo Angelo
_______________________________________________
keycloak-dev mailing list
keycloak-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-dev
10:21 p.m.
Hello Paulo,
To add to Alexis's reply, you can use Script authenticator [1]. It's especially
good for prototyping since you don't have to create and deploy the whole provider
module.
Also, you'll need an HttpClient instance to be able to perform external HTTP requests,
see [2] for that.
[1] https://www.keycloak.org/docs/latest/server_admin/#executions
[2] http://lists.jboss.org/pipermail/keycloak-user/2018-November/016456.html
Good luck,
Dmitry Telegin
CTO, Acutus s.r.o.
Keycloak Consulting and Training
Pod lipami street 339/52, 130 00 Prague 3, Czech Republic
+42 (022) 888-30-71
E-mail: info(a)acutus.pro
On Sun, 2019-02-03 at 17:46 -0200, Alexis Almeida wrote:
Hi Paulo,
IMO the simplest way to do this is with an Authenticator Provider. Please
see here:
https://www.keycloak.org/docs/latest/server_development/index.html#implem...
.
In the authenticate method you can call the GuardianKey and, depending on
the result, you call a context.success () or context.failure ().
Like this:
public void authenticate(AuthenticationFlowContext context) {
...
if(!GuardianKeyValidation){
Response challenge = context.form()
.setError("something")
.createForm("error_page.ftl");
context.failureChallenge(AuthenticationFlowError.INVALID_CREDENTIALS,
challenge);
return;
}
...
context.success();
}
Aléxis
> Em dom, 3 de fev de 2019 às 15:38, Paulo Angelo <pa(a)pauloangelo.com>
escreveu:
> Hi all,
>
> We are trying to integrate KeyCloak with GuardianKey. However, we have
> doubts related to the best way to do this and the best point in the
> KeyCloak’s code for this integration.
>
> GuardianKey is a service to protect systems against authentication attacks.
> It uses Machine Learning and analyses the user's behavior, threat
> intelligence and psychometrics (or behavioral biometrics). The protected
> system (in the concrete case, KeyCloak) must send an event via REST for the
> GuardianKey on each login attempt. More info at https://guardiankey.io .
>
> The best way to integrate would be on having a hook in the procedure that
> process the user credentials submission in KeyCloak (the script that
> receives the POST), something such as:
>
> if(<POST IN AUTH FORM>) {
>
> boolean loginFailed = checkLoginInKeyCloak();
>
> GuardianKeyEvent event = createEventForGuardianKey(username,loginFailed);
>
> boolean GuardianKeyValidation = checkGuardianKeyViaREST(event);
>
> if(GuardianKeyValidation){
>
> // Allow access
>
> } else {
>
> // Deny access
>
> }
>
> }
>
> Where is the best place to create this integration? Is there a way to
> create a hook for this purpose? Should we create an extension?
>
> Any help is welcome.
>
> Thank you in advance.
>
> Best regards,
>
> Paulo Angelo
> _______________________________________________
> keycloak-dev mailing list
> keycloak-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/keycloak-dev
_______________________________________________
keycloak-dev mailing list
keycloak-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-dev
1:21 a.m.
Dmitry and Aléxis,
Thank you very much for the directions. We are going to work on it.
regards,
Paulo Angelo
On Sun, Feb 3, 2019 at 8:06 PM Dmitry Telegin <dt(a)acutus.pro> wrote:
Hello Paulo,
To add to Alexis's reply, you can use Script authenticator [1]. It's
especially good for prototyping since you don't have to create and deploy
the whole provider module.
Also, you'll need an HttpClient instance to be able to perform external
HTTP requests, see [2] for that.
[1] https://www.keycloak.org/docs/latest/server_admin/#executions
[2]
http://lists.jboss.org/pipermail/keycloak-user/2018-November/016456.html
Good luck,
Dmitry Telegin
CTO, Acutus s.r.o.
Keycloak Consulting and Training
Pod lipami street 339/52, 130 00 Prague 3, Czech Republic
+42 (022) 888-30-71
E-mail: info(a)acutus.pro
On Sun, 2019-02-03 at 17:46 -0200, Alexis Almeida wrote:
> Hi Paulo,
>
> IMO the simplest way to do this is with an Authenticator Provider. Please
> see here:
>
>
https://www.keycloak.org/docs/latest/server_development/index.html#implem...
> .
>
> In the authenticate method you can call the GuardianKey and, depending on
> the result, you call a context.success () or context.failure ().
>
> Like this:
>
> public void authenticate(AuthenticationFlowContext context) {
> ...
> if(!GuardianKeyValidation){
> Response challenge = context.form()
> .setError("something")
> .createForm("error_page.ftl");
>
> context.failureChallenge(AuthenticationFlowError.INVALID_CREDENTIALS,
> challenge);
> return;
> }
> ...
> context.success();
> }
>
> Aléxis
>
>
> > Em dom, 3 de fev de 2019 às 15:38, Paulo Angelo <pa(a)pauloangelo.com>
> escreveu:
>
> > Hi all,
> >
> > We are trying to integrate KeyCloak with GuardianKey. However, we have
> > doubts related to the best way to do this and the best point in the
> > KeyCloak’s code for this integration.
> >
> > GuardianKey is a service to protect systems against authentication
attacks.
> > It uses Machine Learning and analyses the user's behavior, threat
> > intelligence and psychometrics (or behavioral biometrics). The
protected
> > system (in the concrete case, KeyCloak) must send an event via REST
for the
> > GuardianKey on each login attempt. More info at https://guardiankey.io
.
> >
> > The best way to integrate would be on having a hook in the procedure
that
> > process the user credentials submission in KeyCloak (the script that
> > receives the POST), something such as:
> >
> > if(<POST IN AUTH FORM>) {
> >
> > boolean loginFailed = checkLoginInKeyCloak();
> >
> > GuardianKeyEvent event =
createEventForGuardianKey(username,loginFailed);
> >
> > boolean GuardianKeyValidation = checkGuardianKeyViaREST(event);
> >
> > if(GuardianKeyValidation){
> >
> > // Allow access
> >
> > } else {
> >
> > // Deny access
> >
> > }
> >
> > }
> >
> > Where is the best place to create this integration? Is there a way to
> > create a hook for this purpose? Should we create an extension?
> >
> > Any help is welcome.
> >
> > Thank you in advance.
> >
> > Best regards,
> >
> > Paulo Angelo
> > _______________________________________________
> > keycloak-dev mailing list
> > keycloak-dev(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/keycloak-dev
>
> _______________________________________________
> keycloak-dev mailing list
> keycloak-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/keycloak-dev
_______________________________________________
keycloak-dev mailing list
keycloak-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-dev
--
Att,
Paulo Angelo
7:30 a.m.
Authenticator is probably the only way to do it right now. Ideally this
should be done through the event listener mechanism, but that doesn't
currently support interrupting the event.
In the future I'd like to introduce a new event SPI for user related events
that is able to interrupt events. It could be used for logins,
registrations, profile updates, etc..
On Mon, 4 Feb 2019 at 01:34, Paulo Angelo <pa(a)pauloangelo.com> wrote:
Dmitry and Aléxis,
Thank you very much for the directions. We are going to work on it.
regards,
Paulo Angelo
On Sun, Feb 3, 2019 at 8:06 PM Dmitry Telegin <dt(a)acutus.pro> wrote:
> Hello Paulo,
>
> To add to Alexis's reply, you can use Script authenticator [1]. It's
> especially good for prototyping since you don't have to create and deploy
> the whole provider module.
>
> Also, you'll need an HttpClient instance to be able to perform external
> HTTP requests, see [2] for that.
>
> [1] https://www.keycloak.org/docs/latest/server_admin/#executions
> [2]
> http://lists.jboss.org/pipermail/keycloak-user/2018-November/016456.html
>
> Good luck,
> Dmitry Telegin
> CTO, Acutus s.r.o.
> Keycloak Consulting and Training
>
> Pod lipami street 339/52, 130 00 Prague 3, Czech Republic
> +42 (022) 888-30-71
> E-mail: info(a)acutus.pro
>
> On Sun, 2019-02-03 at 17:46 -0200, Alexis Almeida wrote:
> > Hi Paulo,
> >
> > IMO the simplest way to do this is with an Authenticator Provider.
Please
> > see here:
> >
> >
>
https://www.keycloak.org/docs/latest/server_development/index.html#implem...
> > .
> >
> > In the authenticate method you can call the GuardianKey and, depending
on
> > the result, you call a context.success () or context.failure ().
> >
> > Like this:
> >
> > public void authenticate(AuthenticationFlowContext context) {
> > ...
> > if(!GuardianKeyValidation){
> > Response challenge = context.form()
> > .setError("something")
> > .createForm("error_page.ftl");
> >
> > context.failureChallenge(AuthenticationFlowError.INVALID_CREDENTIALS,
> > challenge);
> > return;
> > }
> > ...
> > context.success();
> > }
> >
> > Aléxis
> >
> >
> > > Em dom, 3 de fev de 2019 às 15:38, Paulo Angelo
<pa(a)pauloangelo.com>
> > escreveu:
> >
> > > Hi all,
> > >
> > > We are trying to integrate KeyCloak with GuardianKey. However, we
have
> > > doubts related to the best way to do this and the best point in the
> > > KeyCloak’s code for this integration.
> > >
> > > GuardianKey is a service to protect systems against authentication
> attacks.
> > > It uses Machine Learning and analyses the user's behavior, threat
> > > intelligence and psychometrics (or behavioral biometrics). The
> protected
> > > system (in the concrete case, KeyCloak) must send an event via REST
> for the
> > > GuardianKey on each login attempt. More info at
https://guardiankey.io
> .
> > >
> > > The best way to integrate would be on having a hook in the procedure
> that
> > > process the user credentials submission in KeyCloak (the script that
> > > receives the POST), something such as:
> > >
> > > if(<POST IN AUTH FORM>) {
> > >
> > > boolean loginFailed = checkLoginInKeyCloak();
> > >
> > > GuardianKeyEvent event =
> createEventForGuardianKey(username,loginFailed);
> > >
> > > boolean GuardianKeyValidation = checkGuardianKeyViaREST(event);
> > >
> > > if(GuardianKeyValidation){
> > >
> > > // Allow access
> > >
> > > } else {
> > >
> > > // Deny access
> > >
> > > }
> > >
> > > }
> > >
> > > Where is the best place to create this integration? Is there a way to
> > > create a hook for this purpose? Should we create an extension?
> > >
> > > Any help is welcome.
> > >
> > > Thank you in advance.
> > >
> > > Best regards,
> > >
> > > Paulo Angelo
> > > _______________________________________________
> > > keycloak-dev mailing list
> > > keycloak-dev(a)lists.jboss.org
> > > https://lists.jboss.org/mailman/listinfo/keycloak-dev
> >
> > _______________________________________________
> > keycloak-dev mailing list
> > keycloak-dev(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/keycloak-dev
> _______________________________________________
> keycloak-dev mailing list
> keycloak-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/keycloak-dev
--
Att,
Paulo Angelo
_______________________________________________
keycloak-dev mailing list
keycloak-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-dev
7:22 p.m.
Hi All,
The GuardianKey extension for KeyCloak is almost complete! Thank you for
the given directions.
We have to get the user client IP and the status of the authentication
attempt (failed/success). For this, we implemented the code below. However,
we are facing Null Pointer exceptions.
public class GuardianKeyAuthenticator implements Authenticator { // ...
public void authenticate(AuthenticationFlowContext context) { // ...
// *Trying to get the Client IP address*
clientIP =
context.getSession().sessions().getUserSession(context.getAuthenticationSession().getClient().getRealm(),
context.getAuthenticationSession().getClient().getId())
.getIpAddress(); /*
getting null pointer exception */
// *Trying to get the status for the auth attempt
(failed/success), this Authenticator should be the last in the flow*
failed = context.getStatus().equals(FlowStatus.SUCCESS); /*
getting null pointer exception */
// ...
} }
Any clue about how we can do this?
Thank you in advance.
Paulo Angelo
On Sun, Feb 3, 2019 at 10:21 PM Paulo Angelo <pa(a)pauloangelo.com> wrote:
Dmitry and Aléxis,
Thank you very much for the directions. We are going to work on it.
regards,
Paulo Angelo
On Sun, Feb 3, 2019 at 8:06 PM Dmitry Telegin <dt(a)acutus.pro> wrote:
> Hello Paulo,
>
> To add to Alexis's reply, you can use Script authenticator [1]. It's
> especially good for prototyping since you don't have to create and deploy
> the whole provider module.
>
> Also, you'll need an HttpClient instance to be able to perform external
> HTTP requests, see [2] for that.
>
> [1] https://www.keycloak.org/docs/latest/server_admin/#executions
> [2]
> http://lists.jboss.org/pipermail/keycloak-user/2018-November/016456.html
>
> Good luck,
> Dmitry Telegin
> CTO, Acutus s.r.o.
> Keycloak Consulting and Training
>
> Pod lipami street 339/52, 130 00 Prague 3, Czech Republic
> +42 (022) 888-30-71
> E-mail: info(a)acutus.pro
>
> On Sun, 2019-02-03 at 17:46 -0200, Alexis Almeida wrote:
> > Hi Paulo,
> >
> > IMO the simplest way to do this is with an Authenticator Provider.
> Please
> > see here:
> >
> >
>
https://www.keycloak.org/docs/latest/server_development/index.html#implem...
> > .
> >
> > In the authenticate method you can call the GuardianKey and, depending
> on
> > the result, you call a context.success () or context.failure ().
> >
> > Like this:
> >
> > public void authenticate(AuthenticationFlowContext context) {
> > ...
> > if(!GuardianKeyValidation){
> > Response challenge = context.form()
> > .setError("something")
> > .createForm("error_page.ftl");
> >
> > context.failureChallenge(AuthenticationFlowError.INVALID_CREDENTIALS,
> > challenge);
> > return;
> > }
> > ...
> > context.success();
> > }
> >
> > Aléxis
> >
> >
> > > Em dom, 3 de fev de 2019 às 15:38, Paulo Angelo <pa(a)pauloangelo.com>
> > escreveu:
> >
> > > Hi all,
> > >
> > > We are trying to integrate KeyCloak with GuardianKey. However, we have
> > > doubts related to the best way to do this and the best point in the
> > > KeyCloak’s code for this integration.
> > >
> > > GuardianKey is a service to protect systems against authentication
> attacks.
> > > It uses Machine Learning and analyses the user's behavior, threat
> > > intelligence and psychometrics (or behavioral biometrics). The
> protected
> > > system (in the concrete case, KeyCloak) must send an event via REST
> for the
> > > GuardianKey on each login attempt. More info at
> https://guardiankey.io .
> > >
> > > The best way to integrate would be on having a hook in the procedure
> that
> > > process the user credentials submission in KeyCloak (the script that
> > > receives the POST), something such as:
> > >
> > > if(<POST IN AUTH FORM>) {
> > >
> > > boolean loginFailed = checkLoginInKeyCloak();
> > >
> > > GuardianKeyEvent event =
> createEventForGuardianKey(username,loginFailed);
> > >
> > > boolean GuardianKeyValidation = checkGuardianKeyViaREST(event);
> > >
> > > if(GuardianKeyValidation){
> > >
> > > // Allow access
> > >
> > > } else {
> > >
> > > // Deny access
> > >
> > > }
> > >
> > > }
> > >
> > > Where is the best place to create this integration? Is there a way to
> > > create a hook for this purpose? Should we create an extension?
> > >
> > > Any help is welcome.
> > >
> > > Thank you in advance.
> > >
> > > Best regards,
> > >
> > > Paulo Angelo
> > > _______________________________________________
> > > keycloak-dev mailing list
> > > keycloak-dev(a)lists.jboss.org
> > > https://lists.jboss.org/mailman/listinfo/keycloak-dev
> >
> > _______________________________________________
> > keycloak-dev mailing list
> > keycloak-dev(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/keycloak-dev
> _______________________________________________
> keycloak-dev mailing list
> keycloak-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/keycloak-dev
--
Att,
Paulo Angelo
--
Att,
Paulo Angelo
9:45 p.m.
Hello Paulo,
in order to get the remote IP address of the request you could either use
the information from "ClientConnection" or look manually in the current
HttpServletRequest,
or HTTP-Headers. This structures can be obtained from the
"ResteasyProviderFactory".
// See ResteasyProviderFactory.getContextDataMap() for what's
available.
ClientConnection clientConnection =
ResteasyProviderFactory.getContextData(ClientConnection.class);
clientConnection.getRemoteAddr();
HttpServletRequest request =
ResteasyProviderFactory.getContextData(HttpServletRequest.class);
Cheers,
Thomas
Am So., 17. Feb. 2019 um 19:47 Uhr schrieb Paulo Angelo <pa(a)pauloangelo.com
:
Hi All,
The GuardianKey extension for KeyCloak is almost complete! Thank you for
the given directions.
We have to get the user client IP and the status of the authentication
attempt (failed/success). For this, we implemented the code below. However,
we are facing Null Pointer exceptions.
public class GuardianKeyAuthenticator implements Authenticator { // ...
public void authenticate(AuthenticationFlowContext context) { // ...
// *Trying to get the Client IP address*
clientIP =
context.getSession().sessions().getUserSession(context.getAuthenticationSession().getClient().getRealm(),
context.getAuthenticationSession().getClient().getId())
.getIpAddress(); /*
getting null pointer exception */
// *Trying to get the status for the auth attempt
(failed/success), this Authenticator should be the last in the flow*
failed = context.getStatus().equals(FlowStatus.SUCCESS); /*
getting null pointer exception */
// ...
} }
Any clue about how we can do this?
Thank you in advance.
Paulo Angelo
On Sun, Feb 3, 2019 at 10:21 PM Paulo Angelo <pa(a)pauloangelo.com> wrote:
> Dmitry and Aléxis,
>
> Thank you very much for the directions. We are going to work on it.
>
> regards,
>
> Paulo Angelo
>
> On Sun, Feb 3, 2019 at 8:06 PM Dmitry Telegin <dt(a)acutus.pro> wrote:
>
>> Hello Paulo,
>>
>> To add to Alexis's reply, you can use Script authenticator [1]. It's
>> especially good for prototyping since you don't have to create and
deploy
>> the whole provider module.
>>
>> Also, you'll need an HttpClient instance to be able to perform external
>> HTTP requests, see [2] for that.
>>
>> [1] https://www.keycloak.org/docs/latest/server_admin/#executions
>> [2]
>>
http://lists.jboss.org/pipermail/keycloak-user/2018-November/016456.html
>>
>> Good luck,
>> Dmitry Telegin
>> CTO, Acutus s.r.o.
>> Keycloak Consulting and Training
>>
>> Pod lipami street 339/52, 130 00 Prague 3, Czech Republic
>> +42 (022) 888-30-71
>> E-mail: info(a)acutus.pro
>>
>> On Sun, 2019-02-03 at 17:46 -0200, Alexis Almeida wrote:
>> > Hi Paulo,
>> >
>> > IMO the simplest way to do this is with an Authenticator Provider.
>> Please
>> > see here:
>> >
>> >
>>
https://www.keycloak.org/docs/latest/server_development/index.html#implem...
>> > .
>> >
>> > In the authenticate method you can call the GuardianKey and, depending
>> on
>> > the result, you call a context.success () or context.failure ().
>> >
>> > Like this:
>> >
>> > public void authenticate(AuthenticationFlowContext context) {
>> > ...
>> > if(!GuardianKeyValidation){
>> > Response challenge = context.form()
>> > .setError("something")
>> > .createForm("error_page.ftl");
>> >
>> > context.failureChallenge(AuthenticationFlowError.INVALID_CREDENTIALS,
>> > challenge);
>> > return;
>> > }
>> > ...
>> > context.success();
>> > }
>> >
>> > Aléxis
>> >
>> >
>> > > Em dom, 3 de fev de 2019 às 15:38, Paulo Angelo
<pa(a)pauloangelo.com
>
>> > escreveu:
>> >
>> > > Hi all,
>> > >
>> > > We are trying to integrate KeyCloak with GuardianKey. However, we
have
>> > > doubts related to the best way to do this and the best point in the
>> > > KeyCloak’s code for this integration.
>> > >
>> > > GuardianKey is a service to protect systems against authentication
>> attacks.
>> > > It uses Machine Learning and analyses the user's behavior, threat
>> > > intelligence and psychometrics (or behavioral biometrics). The
>> protected
>> > > system (in the concrete case, KeyCloak) must send an event via REST
>> for the
>> > > GuardianKey on each login attempt. More info at
>> https://guardiankey.io .
>> > >
>> > > The best way to integrate would be on having a hook in the procedure
>> that
>> > > process the user credentials submission in KeyCloak (the script that
>> > > receives the POST), something such as:
>> > >
>> > > if(<POST IN AUTH FORM>) {
>> > >
>> > > boolean loginFailed = checkLoginInKeyCloak();
>> > >
>> > > GuardianKeyEvent event =
>> createEventForGuardianKey(username,loginFailed);
>> > >
>> > > boolean GuardianKeyValidation = checkGuardianKeyViaREST(event);
>> > >
>> > > if(GuardianKeyValidation){
>> > >
>> > > // Allow access
>> > >
>> > > } else {
>> > >
>> > > // Deny access
>> > >
>> > > }
>> > >
>> > > }
>> > >
>> > > Where is the best place to create this integration? Is there a way
to
>> > > create a hook for this purpose? Should we create an extension?
>> > >
>> > > Any help is welcome.
>> > >
>> > > Thank you in advance.
>> > >
>> > > Best regards,
>> > >
>> > > Paulo Angelo
>> > > _______________________________________________
>> > > keycloak-dev mailing list
>> > > keycloak-dev(a)lists.jboss.org
>> > > https://lists.jboss.org/mailman/listinfo/keycloak-dev
>> >
>> > _______________________________________________
>> > keycloak-dev mailing list
>> > keycloak-dev(a)lists.jboss.org
>> > https://lists.jboss.org/mailman/listinfo/keycloak-dev
>> _______________________________________________
>> keycloak-dev mailing list
>> keycloak-dev(a)lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/keycloak-dev
>
>
>
> --
>
> Att,
>
> Paulo Angelo
>
--
Att,
Paulo Angelo
_______________________________________________
keycloak-dev mailing list
keycloak-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-dev
10:18 p.m.
Hi Paulo!
In addition to Thomas suggestion, I usually capture the remote IP like this:
String ip = context.getSession (). GetContext (). GetConnection ().
GetRemoteAddr ();
About login status, I think you must to change your approach to get failure
login.
In the authentication flow, if you put your authenticator provider before
"user and password" form this wil not work, because the user is not
authenticated yet.
If you put it after "user and passwrd" form, you'll only catch success
logins.
So I think you could implement the EventListener class to get any event
type:
public class RealmTeste implements EventListenerProvider, Authenticator {
...
public void onEvent(Event event) {
String ip = event.getIpAddress();
if (event.getType().equals("LOGIN_ERROR")) {
}
}
public void onEvent(AdminEvent event, boolean includeRepresentation) {
}
...
Regards
Aléxis
Em dom, 17 de fev de 2019 às 17:45, Thomas Darimont <
thomas.darimont(a)googlemail.com> escreveu:
Hello Paulo,
in order to get the remote IP address of the request you could either use
the information from "ClientConnection" or look manually in the current
HttpServletRequest,
or HTTP-Headers. This structures can be obtained from the
"ResteasyProviderFactory".
// See ResteasyProviderFactory.getContextDataMap() for what's
available.
ClientConnection clientConnection =
ResteasyProviderFactory.getContextData(ClientConnection.class);
clientConnection.getRemoteAddr();
HttpServletRequest request =
ResteasyProviderFactory.getContextData(HttpServletRequest.class);
Cheers,
Thomas
Am So., 17. Feb. 2019 um 19:47 Uhr schrieb Paulo Angelo <
pa(a)pauloangelo.com>:
> Hi All,
>
> The GuardianKey extension for KeyCloak is almost complete! Thank you for
> the given directions.
>
> We have to get the user client IP and the status of the authentication
> attempt (failed/success). For this, we implemented the code below.
> However,
> we are facing Null Pointer exceptions.
>
> public class GuardianKeyAuthenticator implements Authenticator { // ...
> public void authenticate(AuthenticationFlowContext context) { // ...
> // *Trying to get the Client IP address*
> clientIP =
>
>
context.getSession().sessions().getUserSession(context.getAuthenticationSession().getClient().getRealm(),
>
> context.getAuthenticationSession().getClient().getId())
> .getIpAddress(); /*
> getting null pointer exception */
> // *Trying to get the status for the auth attempt
> (failed/success), this Authenticator should be the last in the flow*
> failed = context.getStatus().equals(FlowStatus.SUCCESS); /*
> getting null pointer exception */
> // ...
> } }
>
> Any clue about how we can do this?
>
> Thank you in advance.
>
> Paulo Angelo
>
>
> On Sun, Feb 3, 2019 at 10:21 PM Paulo Angelo <pa(a)pauloangelo.com> wrote:
>
> > Dmitry and Aléxis,
> >
> > Thank you very much for the directions. We are going to work on it.
> >
> > regards,
> >
> > Paulo Angelo
> >
> > On Sun, Feb 3, 2019 at 8:06 PM Dmitry Telegin <dt(a)acutus.pro> wrote:
> >
> >> Hello Paulo,
> >>
> >> To add to Alexis's reply, you can use Script authenticator [1].
It's
> >> especially good for prototyping since you don't have to create and
> deploy
> >> the whole provider module.
> >>
> >> Also, you'll need an HttpClient instance to be able to perform external
> >> HTTP requests, see [2] for that.
> >>
> >> [1] https://www.keycloak.org/docs/latest/server_admin/#executions
> >> [2]
> >>
> http://lists.jboss.org/pipermail/keycloak-user/2018-November/016456.html
> >>
> >> Good luck,
> >> Dmitry Telegin
> >> CTO, Acutus s.r.o.
> >> Keycloak Consulting and Training
> >>
> >> Pod lipami street 339/52, 130 00 Prague 3, Czech Republic
> >> +42 (022) 888-30-71
> >> E-mail: info(a)acutus.pro
> >>
> >> On Sun, 2019-02-03 at 17:46 -0200, Alexis Almeida wrote:
> >> > Hi Paulo,
> >> >
> >> > IMO the simplest way to do this is with an Authenticator Provider.
> >> Please
> >> > see here:
> >> >
> >> >
> >>
>
https://www.keycloak.org/docs/latest/server_development/index.html#implem...
> >> > .
> >> >
> >> > In the authenticate method you can call the GuardianKey and,
> depending
> >> on
> >> > the result, you call a context.success () or context.failure ().
> >> >
> >> > Like this:
> >> >
> >> > public void authenticate(AuthenticationFlowContext context) {
> >> > ...
> >> > if(!GuardianKeyValidation){
> >> > Response challenge = context.form()
> >> > .setError("something")
> >> > .createForm("error_page.ftl");
> >> >
> >> >
> context.failureChallenge(AuthenticationFlowError.INVALID_CREDENTIALS,
> >> > challenge);
> >> > return;
> >> > }
> >> > ...
> >> > context.success();
> >> > }
> >> >
> >> > Aléxis
> >> >
> >> >
> >> > > Em dom, 3 de fev de 2019 às 15:38, Paulo Angelo <
> pa(a)pauloangelo.com>
> >> > escreveu:
> >> >
> >> > > Hi all,
> >> > >
> >> > > We are trying to integrate KeyCloak with GuardianKey. However, we
> have
> >> > > doubts related to the best way to do this and the best point in
the
> >> > > KeyCloak’s code for this integration.
> >> > >
> >> > > GuardianKey is a service to protect systems against
authentication
> >> attacks.
> >> > > It uses Machine Learning and analyses the user's behavior,
threat
> >> > > intelligence and psychometrics (or behavioral biometrics). The
> >> protected
> >> > > system (in the concrete case, KeyCloak) must send an event via
REST
> >> for the
> >> > > GuardianKey on each login attempt. More info at
> >> https://guardiankey.io .
> >> > >
> >> > > The best way to integrate would be on having a hook in the
> procedure
> >> that
> >> > > process the user credentials submission in KeyCloak (the script
> that
> >> > > receives the POST), something such as:
> >> > >
> >> > > if(<POST IN AUTH FORM>) {
> >> > >
> >> > > boolean loginFailed = checkLoginInKeyCloak();
> >> > >
> >> > > GuardianKeyEvent event =
> >> createEventForGuardianKey(username,loginFailed);
> >> > >
> >> > > boolean GuardianKeyValidation = checkGuardianKeyViaREST(event);
> >> > >
> >> > > if(GuardianKeyValidation){
> >> > >
> >> > > // Allow access
> >> > >
> >> > > } else {
> >> > >
> >> > > // Deny access
> >> > >
> >> > > }
> >> > >
> >> > > }
> >> > >
> >> > > Where is the best place to create this integration? Is there a
way
> to
> >> > > create a hook for this purpose? Should we create an extension?
> >> > >
> >> > > Any help is welcome.
> >> > >
> >> > > Thank you in advance.
> >> > >
> >> > > Best regards,
> >> > >
> >> > > Paulo Angelo
> >> > > _______________________________________________
> >> > > keycloak-dev mailing list
> >> > > keycloak-dev(a)lists.jboss.org
> >> > > https://lists.jboss.org/mailman/listinfo/keycloak-dev
> >> >
> >> > _______________________________________________
> >> > keycloak-dev mailing list
> >> > keycloak-dev(a)lists.jboss.org
> >> > https://lists.jboss.org/mailman/listinfo/keycloak-dev
> >> _______________________________________________
> >> keycloak-dev mailing list
> >> keycloak-dev(a)lists.jboss.org
> >> https://lists.jboss.org/mailman/listinfo/keycloak-dev
> >
> >
> >
> > --
> >
> > Att,
> >
> > Paulo Angelo
> >
>
>
> --
>
> Att,
>
> Paulo Angelo
> _______________________________________________
> keycloak-dev mailing list
> keycloak-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/keycloak-dev
2:11 a.m.
Thank you Thomas and Alexis!
Another question: In the method "onEvent" of an EventListener, how could I
get the configuration for one specific Authenticator?
When the Authenticator is triggered (authenticate method), I can access its
config using:
Map<String,String> config =
context.getAuthenticatorConfig().getConfig();
However, the context is not directly available (as expected) when the
"EventListener.onEvent" is triggered.
I could see in the documentation [1] that, inside the EventListener, I can
have access to a KeycloakSession and a KeycloakSessionFactory. But I could
not find the path for one specific Authenticator config. I also saw in docs
that it is possible to save the configuration for the EventListener, but
the attributes are the same used in the Authenticator.
Is it possible to retrieve the configuration of a specific Authenticator in
the flow used by the "event"?
Thank you in advance,
Paulo Angelo
[1]
https://www.keycloak.org/docs/3.3/server_development/topics/providers.html
On Sun, Feb 17, 2019 at 6:25 PM Alexis Almeida <alexis.almeida(a)gmail.com>
wrote:
Hi Paulo!
In addition to Thomas suggestion, I usually capture the remote IP like
this:
String ip = context.getSession (). GetContext (). GetConnection ().
GetRemoteAddr ();
About login status, I think you must to change your approach to get failure
login.
In the authentication flow, if you put your authenticator provider before
"user and password" form this wil not work, because the user is not
authenticated yet.
If you put it after "user and passwrd" form, you'll only catch success
logins.
So I think you could implement the EventListener class to get any event
type:
public class RealmTeste implements EventListenerProvider, Authenticator {
...
public void onEvent(Event event) {
String ip = event.getIpAddress();
if (event.getType().equals("LOGIN_ERROR")) {
}
}
public void onEvent(AdminEvent event, boolean includeRepresentation) {
}
...
Regards
Aléxis
Em dom, 17 de fev de 2019 às 17:45, Thomas Darimont <
thomas.darimont(a)googlemail.com> escreveu:
> Hello Paulo,
>
> in order to get the remote IP address of the request you could either use
> the information from "ClientConnection" or look manually in the current
> HttpServletRequest,
> or HTTP-Headers. This structures can be obtained from the
> "ResteasyProviderFactory".
>
> // See ResteasyProviderFactory.getContextDataMap() for what's
> available.
>
> ClientConnection clientConnection =
> ResteasyProviderFactory.getContextData(ClientConnection.class);
> clientConnection.getRemoteAddr();
>
> HttpServletRequest request =
> ResteasyProviderFactory.getContextData(HttpServletRequest.class);
>
> Cheers,
> Thomas
>
> Am So., 17. Feb. 2019 um 19:47 Uhr schrieb Paulo Angelo <
> pa(a)pauloangelo.com>:
>
>> Hi All,
>>
>> The GuardianKey extension for KeyCloak is almost complete! Thank you for
>> the given directions.
>>
>> We have to get the user client IP and the status of the authentication
>> attempt (failed/success). For this, we implemented the code below.
>> However,
>> we are facing Null Pointer exceptions.
>>
>> public class GuardianKeyAuthenticator implements Authenticator { // ...
>> public void authenticate(AuthenticationFlowContext context) { // ...
>> // *Trying to get the Client IP address*
>> clientIP =
>>
>>
context.getSession().sessions().getUserSession(context.getAuthenticationSession().getClient().getRealm(),
>>
>> context.getAuthenticationSession().getClient().getId())
>> .getIpAddress(); /*
>> getting null pointer exception */
>> // *Trying to get the status for the auth attempt
>> (failed/success), this Authenticator should be the last in the flow*
>> failed = context.getStatus().equals(FlowStatus.SUCCESS); /*
>> getting null pointer exception */
>> // ...
>> } }
>>
>> Any clue about how we can do this?
>>
>> Thank you in advance.
>>
>> Paulo Angelo
>>
>>
>> On Sun, Feb 3, 2019 at 10:21 PM Paulo Angelo <pa(a)pauloangelo.com>
wrote:
>>
>> > Dmitry and Aléxis,
>> >
>> > Thank you very much for the directions. We are going to work on it.
>> >
>> > regards,
>> >
>> > Paulo Angelo
>> >
>> > On Sun, Feb 3, 2019 at 8:06 PM Dmitry Telegin <dt(a)acutus.pro> wrote:
>> >
>> >> Hello Paulo,
>> >>
>> >> To add to Alexis's reply, you can use Script authenticator [1].
It's
>> >> especially good for prototyping since you don't have to create and
>> deploy
>> >> the whole provider module.
>> >>
>> >> Also, you'll need an HttpClient instance to be able to perform
external
>> >> HTTP requests, see [2] for that.
>> >>
>> >> [1] https://www.keycloak.org/docs/latest/server_admin/#executions
>> >> [2]
>> >>
>>
http://lists.jboss.org/pipermail/keycloak-user/2018-November/016456.html
>> >>
>> >> Good luck,
>> >> Dmitry Telegin
>> >> CTO, Acutus s.r.o.
>> >> Keycloak Consulting and Training
>> >>
>> >> Pod lipami street 339/52, 130 00 Prague 3, Czech Republic
>> >> +42 (022) 888-30-71
>> >> E-mail: info(a)acutus.pro
>> >>
>> >> On Sun, 2019-02-03 at 17:46 -0200, Alexis Almeida wrote:
>> >> > Hi Paulo,
>> >> >
>> >> > IMO the simplest way to do this is with an Authenticator
Provider.
>> >> Please
>> >> > see here:
>> >> >
>> >> >
>> >>
>>
https://www.keycloak.org/docs/latest/server_development/index.html#implem...
>> >> > .
>> >> >
>> >> > In the authenticate method you can call the GuardianKey and,
>> depending
>> >> on
>> >> > the result, you call a context.success () or context.failure ().
>> >> >
>> >> > Like this:
>> >> >
>> >> > public void authenticate(AuthenticationFlowContext context) {
>> >> > ...
>> >> > if(!GuardianKeyValidation){
>> >> > Response challenge = context.form()
>> >> > .setError("something")
>> >> > .createForm("error_page.ftl");
>> >> >
>> >> >
>> context.failureChallenge(AuthenticationFlowError.INVALID_CREDENTIALS,
>> >> > challenge);
>> >> > return;
>> >> > }
>> >> > ...
>> >> > context.success();
>> >> > }
>> >> >
>> >> > Aléxis
>> >> >
>> >> >
>> >> > > Em dom, 3 de fev de 2019 às 15:38, Paulo Angelo <
>> pa(a)pauloangelo.com>
>> >> > escreveu:
>> >> >
>> >> > > Hi all,
>> >> > >
>> >> > > We are trying to integrate KeyCloak with GuardianKey.
However, we
>> have
>> >> > > doubts related to the best way to do this and the best point
in
the
>> >> > > KeyCloak’s code for this integration.
>> >> > >
>> >> > > GuardianKey is a service to protect systems against
authentication
>> >> attacks.
>> >> > > It uses Machine Learning and analyses the user's
behavior, threat
>> >> > > intelligence and psychometrics (or behavioral biometrics).
The
>> >> protected
>> >> > > system (in the concrete case, KeyCloak) must send an event
via
REST
>> >> for the
>> >> > > GuardianKey on each login attempt. More info at
>> >> https://guardiankey.io .
>> >> > >
>> >> > > The best way to integrate would be on having a hook in the
>> procedure
>> >> that
>> >> > > process the user credentials submission in KeyCloak (the
script
>> that
>> >> > > receives the POST), something such as:
>> >> > >
>> >> > > if(<POST IN AUTH FORM>) {
>> >> > >
>> >> > > boolean loginFailed = checkLoginInKeyCloak();
>> >> > >
>> >> > > GuardianKeyEvent event =
>> >> createEventForGuardianKey(username,loginFailed);
>> >> > >
>> >> > > boolean GuardianKeyValidation =
checkGuardianKeyViaREST(event);
>> >> > >
>> >> > > if(GuardianKeyValidation){
>> >> > >
>> >> > > // Allow access
>> >> > >
>> >> > > } else {
>> >> > >
>> >> > > // Deny access
>> >> > >
>> >> > > }
>> >> > >
>> >> > > }
>> >> > >
>> >> > > Where is the best place to create this integration? Is there
a
way
>> to
>> >> > > create a hook for this purpose? Should we create an
extension?
>> >> > >
>> >> > > Any help is welcome.
>> >> > >
>> >> > > Thank you in advance.
>> >> > >
>> >> > > Best regards,
>> >> > >
>> >> > > Paulo Angelo
>> >> > > _______________________________________________
>> >> > > keycloak-dev mailing list
>> >> > > keycloak-dev(a)lists.jboss.org
>> >> > > https://lists.jboss.org/mailman/listinfo/keycloak-dev
>> >> >
>> >> > _______________________________________________
>> >> > keycloak-dev mailing list
>> >> > keycloak-dev(a)lists.jboss.org
>> >> > https://lists.jboss.org/mailman/listinfo/keycloak-dev
>> >> _______________________________________________
>> >> keycloak-dev mailing list
>> >> keycloak-dev(a)lists.jboss.org
>> >> https://lists.jboss.org/mailman/listinfo/keycloak-dev
>> >
>> >
>> >
>> > --
>> >
>> > Att,
>> >
>> > Paulo Angelo
>> >
>>
>>
>> --
>>
>> Att,
>>
>> Paulo Angelo
>> _______________________________________________
>> keycloak-dev mailing list
>> keycloak-dev(a)lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/keycloak-dev
>
>
_______________________________________________
keycloak-dev mailing list
keycloak-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-dev
--
Att,
Paulo Angelo
6:31 a.m.
Hi Paulo!
I had this same problem and to solve it I did this:
private AuthenticatorConfigModel getConfig(KeycloakSession session,
String providerId) {
logger.info("Getting config for: " + providerId);
AuthenticatorConfigModel configModel = null;
RealmModel realm = session.getContext().getRealm();
String flowId = realm.getBrowserFlow().getId();
return getConfig(realm, flowId, providerId);
}
private AuthenticatorConfigModel getConfig(RealmModel realm, String
flowId, String providerId) {
logger.info("Getting config for: " + flowId);
AuthenticatorConfigModel configModel = null;
List<AuthenticationExecutionModel> laem =
realm.getAuthenticationExecutions(flowId);
for (AuthenticationExecutionModel aem : laem) {
logger.info("aem: " + String.format("%s, %s, %s, %s",
aem.getFlowId(), aem.getId(),
aem.isEnabled(),aem.isAuthenticatorFlow()));
if (aem.isAuthenticatorFlow()) {
logger.info("flow: " + aem.getFlowId());
configModel = getConfig(realm, aem.getFlowId(), providerId);
if (configModel!= null) return configModel;
} else if (aem.getAuthenticator() != null &&
aem.getAuthenticator().equals(providerId)) {
logger.info("authenticator: " + aem.getAuthenticator());
configModel =
realm.getAuthenticatorConfigById(aem.getAuthenticatorConfig());
break;
}
}
return configModel;
}
Best regards
Alexis
Em dom, 17 de fev de 2019 às 22:11, Paulo Angelo <pa(a)pauloangelo.com>
escreveu:
Thank you Thomas and Alexis!
Another question: In the method "onEvent" of an EventListener, how could I
get the configuration for one specific Authenticator?
When the Authenticator is triggered (authenticate method), I can access
its config using:
Map<String,String> config =
context.getAuthenticatorConfig().getConfig();
However, the context is not directly available (as expected) when the
"EventListener.onEvent" is triggered.
I could see in the documentation [1] that, inside the EventListener, I can
have access to a KeycloakSession and a KeycloakSessionFactory. But I could
not find the path for one specific Authenticator config. I also saw in docs
that it is possible to save the configuration for the EventListener, but
the attributes are the same used in the Authenticator.
Is it possible to retrieve the configuration of a specific Authenticator
in the flow used by the "event"?
Thank you in advance,
Paulo Angelo
[1]
https://www.keycloak.org/docs/3.3/server_development/topics/providers.html
On Sun, Feb 17, 2019 at 6:25 PM Alexis Almeida <alexis.almeida(a)gmail.com>
wrote:
> Hi Paulo!
>
> In addition to Thomas suggestion, I usually capture the remote IP like
> this:
>
> String ip = context.getSession (). GetContext (). GetConnection ().
> GetRemoteAddr ();
>
> About login status, I think you must to change your approach to get
> failure
> login.
>
> In the authentication flow, if you put your authenticator provider before
> "user and password" form this wil not work, because the user is not
> authenticated yet.
> If you put it after "user and passwrd" form, you'll only catch success
> logins.
>
> So I think you could implement the EventListener class to get any event
> type:
>
> public class RealmTeste implements EventListenerProvider, Authenticator {
> ...
> public void onEvent(Event event) {
> String ip = event.getIpAddress();
> if (event.getType().equals("LOGIN_ERROR")) {
>
> }
> }
> public void onEvent(AdminEvent event, boolean includeRepresentation) {
> }
> ...
>
> Regards
>
> Aléxis
>
>
> Em dom, 17 de fev de 2019 às 17:45, Thomas Darimont <
> thomas.darimont(a)googlemail.com> escreveu:
>
> > Hello Paulo,
> >
> > in order to get the remote IP address of the request you could either
> use
> > the information from "ClientConnection" or look manually in the
current
> > HttpServletRequest,
> > or HTTP-Headers. This structures can be obtained from the
> > "ResteasyProviderFactory".
> >
> > // See ResteasyProviderFactory.getContextDataMap() for what's
> > available.
> >
> > ClientConnection clientConnection =
> > ResteasyProviderFactory.getContextData(ClientConnection.class);
> > clientConnection.getRemoteAddr();
> >
> > HttpServletRequest request =
> > ResteasyProviderFactory.getContextData(HttpServletRequest.class);
> >
> > Cheers,
> > Thomas
> >
> > Am So., 17. Feb. 2019 um 19:47 Uhr schrieb Paulo Angelo <
> > pa(a)pauloangelo.com>:
> >
> >> Hi All,
> >>
> >> The GuardianKey extension for KeyCloak is almost complete! Thank you
> for
> >> the given directions.
> >>
> >> We have to get the user client IP and the status of the authentication
> >> attempt (failed/success). For this, we implemented the code below.
> >> However,
> >> we are facing Null Pointer exceptions.
> >>
> >> public class GuardianKeyAuthenticator implements Authenticator { //
> ...
> >> public void authenticate(AuthenticationFlowContext context) { // ...
> >> // *Trying to get the Client IP address*
> >> clientIP =
> >>
> >>
>
context.getSession().sessions().getUserSession(context.getAuthenticationSession().getClient().getRealm(),
> >>
> >> context.getAuthenticationSession().getClient().getId())
> >> .getIpAddress();
> /*
> >> getting null pointer exception */
> >> // *Trying to get the status for the auth attempt
> >> (failed/success), this Authenticator should be the last in the flow*
> >> failed = context.getStatus().equals(FlowStatus.SUCCESS);
> /*
> >> getting null pointer exception */
> >> // ...
> >> } }
> >>
> >> Any clue about how we can do this?
> >>
> >> Thank you in advance.
> >>
> >> Paulo Angelo
> >>
> >>
> >> On Sun, Feb 3, 2019 at 10:21 PM Paulo Angelo <pa(a)pauloangelo.com>
> wrote:
> >>
> >> > Dmitry and Aléxis,
> >> >
> >> > Thank you very much for the directions. We are going to work on it.
> >> >
> >> > regards,
> >> >
> >> > Paulo Angelo
> >> >
> >> > On Sun, Feb 3, 2019 at 8:06 PM Dmitry Telegin <dt(a)acutus.pro>
wrote:
> >> >
> >> >> Hello Paulo,
> >> >>
> >> >> To add to Alexis's reply, you can use Script authenticator [1].
It's
> >> >> especially good for prototyping since you don't have to create
and
> >> deploy
> >> >> the whole provider module.
> >> >>
> >> >> Also, you'll need an HttpClient instance to be able to perform
> external
> >> >> HTTP requests, see [2] for that.
> >> >>
> >> >> [1] https://www.keycloak.org/docs/latest/server_admin/#executions
> >> >> [2]
> >> >>
> >>
> http://lists.jboss.org/pipermail/keycloak-user/2018-November/016456.html
> >> >>
> >> >> Good luck,
> >> >> Dmitry Telegin
> >> >> CTO, Acutus s.r.o.
> >> >> Keycloak Consulting and Training
> >> >>
> >> >> Pod lipami street 339/52, 130 00 Prague 3, Czech Republic
> >> >> +42 (022) 888-30-71
> >> >> E-mail: info(a)acutus.pro
> >> >>
> >> >> On Sun, 2019-02-03 at 17:46 -0200, Alexis Almeida wrote:
> >> >> > Hi Paulo,
> >> >> >
> >> >> > IMO the simplest way to do this is with an Authenticator
Provider.
> >> >> Please
> >> >> > see here:
> >> >> >
> >> >> >
> >> >>
> >>
>
https://www.keycloak.org/docs/latest/server_development/index.html#implem...
> >> >> > .
> >> >> >
> >> >> > In the authenticate method you can call the GuardianKey and,
> >> depending
> >> >> on
> >> >> > the result, you call a context.success () or context.failure
().
> >> >> >
> >> >> > Like this:
> >> >> >
> >> >> > public void authenticate(AuthenticationFlowContext context) {
> >> >> > ...
> >> >> > if(!GuardianKeyValidation){
> >> >> > Response challenge = context.form()
> >> >> > .setError("something")
> >> >> > .createForm("error_page.ftl");
> >> >> >
> >> >> >
> >> context.failureChallenge(AuthenticationFlowError.INVALID_CREDENTIALS,
> >> >> > challenge);
> >> >> > return;
> >> >> > }
> >> >> > ...
> >> >> > context.success();
> >> >> > }
> >> >> >
> >> >> > Aléxis
> >> >> >
> >> >> >
> >> >> > > Em dom, 3 de fev de 2019 às 15:38, Paulo Angelo <
> >> pa(a)pauloangelo.com>
> >> >> > escreveu:
> >> >> >
> >> >> > > Hi all,
> >> >> > >
> >> >> > > We are trying to integrate KeyCloak with GuardianKey.
However,
> we
> >> have
> >> >> > > doubts related to the best way to do this and the best
point in
> the
> >> >> > > KeyCloak’s code for this integration.
> >> >> > >
> >> >> > > GuardianKey is a service to protect systems against
> authentication
> >> >> attacks.
> >> >> > > It uses Machine Learning and analyses the user's
behavior,
> threat
> >> >> > > intelligence and psychometrics (or behavioral
biometrics). The
> >> >> protected
> >> >> > > system (in the concrete case, KeyCloak) must send an
event via
> REST
> >> >> for the
> >> >> > > GuardianKey on each login attempt. More info at
> >> >> https://guardiankey.io .
> >> >> > >
> >> >> > > The best way to integrate would be on having a hook in
the
> >> procedure
> >> >> that
> >> >> > > process the user credentials submission in KeyCloak (the
script
> >> that
> >> >> > > receives the POST), something such as:
> >> >> > >
> >> >> > > if(<POST IN AUTH FORM>) {
> >> >> > >
> >> >> > > boolean loginFailed = checkLoginInKeyCloak();
> >> >> > >
> >> >> > > GuardianKeyEvent event =
> >> >> createEventForGuardianKey(username,loginFailed);
> >> >> > >
> >> >> > > boolean GuardianKeyValidation =
checkGuardianKeyViaREST(event);
> >> >> > >
> >> >> > > if(GuardianKeyValidation){
> >> >> > >
> >> >> > > // Allow access
> >> >> > >
> >> >> > > } else {
> >> >> > >
> >> >> > > // Deny access
> >> >> > >
> >> >> > > }
> >> >> > >
> >> >> > > }
> >> >> > >
> >> >> > > Where is the best place to create this integration? Is
there a
> way
> >> to
> >> >> > > create a hook for this purpose? Should we create an
extension?
> >> >> > >
> >> >> > > Any help is welcome.
> >> >> > >
> >> >> > > Thank you in advance.
> >> >> > >
> >> >> > > Best regards,
> >> >> > >
> >> >> > > Paulo Angelo
> >> >> > > _______________________________________________
> >> >> > > keycloak-dev mailing list
> >> >> > > keycloak-dev(a)lists.jboss.org
> >> >> > > https://lists.jboss.org/mailman/listinfo/keycloak-dev
> >> >> >
> >> >> > _______________________________________________
> >> >> > keycloak-dev mailing list
> >> >> > keycloak-dev(a)lists.jboss.org
> >> >> > https://lists.jboss.org/mailman/listinfo/keycloak-dev
> >> >> _______________________________________________
> >> >> keycloak-dev mailing list
> >> >> keycloak-dev(a)lists.jboss.org
> >> >> https://lists.jboss.org/mailman/listinfo/keycloak-dev
> >> >
> >> >
> >> >
> >> > --
> >> >
> >> > Att,
> >> >
> >> > Paulo Angelo
> >> >
> >>
> >>
> >> --
> >>
> >> Att,
> >>
> >> Paulo Angelo
> >> _______________________________________________
> >> keycloak-dev mailing list
> >> keycloak-dev(a)lists.jboss.org
> >> https://lists.jboss.org/mailman/listinfo/keycloak-dev
> >
> >
> _______________________________________________
> keycloak-dev mailing list
> keycloak-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/keycloak-dev
--
Att,
Paulo Angelo
1886
days inactive
1902
days old
9 comments
5 participants
participants (5)
-
Alexis Almeida -
Dmitry Telegin -
Paulo Angelo -
Stian Thorgersen -
Thomas Darimont