8:37 p.m.
Hi,
I have a few applications that are using Keycloak 1.5 and I now want to
cluster it. I had followed this link (
https://docs.jboss.org/keycloak/docs/1.1.0.Beta2/userguide/html/clusterin...)
but i am not able to access this server from outside world and I also
wanted to know how I can add nodes to my cluster. Could anyone please help
me out in this respect.
Thanks.
11:48 p.m.
I don't know what you mean that you can't access from outside world, but if
you're running a cluster you'll need a load balance in front. Apache, Nginx
or even Undertow would do that for you.
You add nodes by just running more nodes on the same subnet and they'll
discover themselves.
On 12 January 2016 at 12:37, Revanth Ayalasomayajula <
revanth(a)arvindinternet.com> wrote:
Hi,
I have a few applications that are using Keycloak 1.5 and I now want to
cluster it. I had followed this link (
https://docs.jboss.org/keycloak/docs/1.1.0.Beta2/userguide/html/clusterin...)
but i am not able to access this server from outside world and I also
wanted to know how I can add nodes to my cluster. Could anyone please help
me out in this respect.
Thanks.
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-user
12:26 a.m.
I mean, i am not able to access it using it public ip.
On Tue, Jan 12, 2016 at 8:18 PM, Stian Thorgersen <sthorger(a)redhat.com>
wrote:
I don't know what you mean that you can't access from outside
world, but
if you're running a cluster you'll need a load balance in front. Apache,
Nginx or even Undertow would do that for you.
You add nodes by just running more nodes on the same subnet and they'll
discover themselves.
On 12 January 2016 at 12:37, Revanth Ayalasomayajula <
revanth(a)arvindinternet.com> wrote:
> Hi,
>
> I have a few applications that are using Keycloak 1.5 and I now want to
> cluster it. I had followed this link (
> https://docs.jboss.org/keycloak/docs/1.1.0.Beta2/userguide/html/clusterin...)
> but i am not able to access this server from outside world and I also
> wanted to know how I can add nodes to my cluster. Could anyone please help
> me out in this respect.
>
> Thanks.
>
> _______________________________________________
> keycloak-user mailing list
> keycloak-user(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/keycloak-user
>
3:38 a.m.
If you're saying you can only access it using localhost, then run it with
"bin/standalone.sh -b 0.0.0.0" and it'll be bound to all interfaces.
On 12 January 2016 at 16:26, Revanth Ayalasomayajula <
revanth(a)arvindinternet.com> wrote:
I mean, i am not able to access it using it public ip.
On Tue, Jan 12, 2016 at 8:18 PM, Stian Thorgersen <sthorger(a)redhat.com>
wrote:
> I don't know what you mean that you can't access from outside world, but
> if you're running a cluster you'll need a load balance in front. Apache,
> Nginx or even Undertow would do that for you.
>
> You add nodes by just running more nodes on the same subnet and they'll
> discover themselves.
>
> On 12 January 2016 at 12:37, Revanth Ayalasomayajula <
> revanth(a)arvindinternet.com> wrote:
>
>> Hi,
>>
>> I have a few applications that are using Keycloak 1.5 and I now want to
>> cluster it. I had followed this link (
>> https://docs.jboss.org/keycloak/docs/1.1.0.Beta2/userguide/html/clusterin...)
>> but i am not able to access this server from outside world and I also
>> wanted to know how I can add nodes to my cluster. Could anyone please help
>> me out in this respect.
>>
>> Thanks.
>>
>> _______________________________________________
>> keycloak-user mailing list
>> keycloak-user(a)lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/keycloak-user
>>
>
>
7:25 p.m.
Hi I am using keycloak1.5.0 and want to cluster it, I made the changes
necessary changes to standalone-ha.xml.
I am running the following command: ./standalone.sh
--server-config=standalone-ha.xml -b=0.0.0.0
I am getting the below error:
Caused by: java.net.BindException: [UDP] /0.0.0.0 is not a valid address on
any local network interface
at org.jgroups.util.Util.checkIfValidAddress(Util.java:3484)
at
org.jgroups.stack.Configurator.ensureValidBindAddresses(Configurator.java:903)
at
org.jgroups.stack.Configurator.setupProtocolStack(Configurator.java:118)
at
org.jgroups.stack.Configurator.setupProtocolStack(Configurator.java:57)
at org.jgroups.stack.ProtocolStack.setup(ProtocolStack.java:477)
at org.jgroups.JChannel.init(JChannel.java:854)
at org.jgroups.JChannel.<init>(JChannel.java:159)
at
org.jboss.as.clustering.jgroups.JChannelFactory$1.run(JChannelFactory.java:96)
at
org.jboss.as.clustering.jgroups.JChannelFactory$1.run(JChannelFactory.java:93)
at
org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:634)
... 7 more
I changed my keycloak.json as per the documentation for clustering.
Could you help me figure out what is the issue??
On Wed, Jan 13, 2016 at 12:08 AM, Stian Thorgersen <sthorger(a)redhat.com>
wrote:
If you're saying you can only access it using localhost, then run
it with
"bin/standalone.sh -b 0.0.0.0" and it'll be bound to all interfaces.
On 12 January 2016 at 16:26, Revanth Ayalasomayajula <
revanth(a)arvindinternet.com> wrote:
> I mean, i am not able to access it using it public ip.
>
>
>
> On Tue, Jan 12, 2016 at 8:18 PM, Stian Thorgersen <sthorger(a)redhat.com>
> wrote:
>
>> I don't know what you mean that you can't access from outside world, but
>> if you're running a cluster you'll need a load balance in front. Apache,
>> Nginx or even Undertow would do that for you.
>>
>> You add nodes by just running more nodes on the same subnet and they'll
>> discover themselves.
>>
>> On 12 January 2016 at 12:37, Revanth Ayalasomayajula <
>> revanth(a)arvindinternet.com> wrote:
>>
>>> Hi,
>>>
>>> I have a few applications that are using Keycloak 1.5 and I now want to
>>> cluster it. I had followed this link (
>>>
https://docs.jboss.org/keycloak/docs/1.1.0.Beta2/userguide/html/clusterin...)
>>> but i am not able to access this server from outside world and I also
>>> wanted to know how I can add nodes to my cluster. Could anyone please help
>>> me out in this respect.
>>>
>>> Thanks.
>>>
>>> _______________________________________________
>>> keycloak-user mailing list
>>> keycloak-user(a)lists.jboss.org
>>> https://lists.jboss.org/mailman/listinfo/keycloak-user
>>>
>>
>>
>
8:29 p.m.
You can try to use "-b 0.0.0.0" instead of "-b=0.0.0.0"
Marek
On 28/01/16 11:25, Revanth Ayalasomayajula wrote:
Hi I am using keycloak1.5.0 and want to cluster it, I made the
changes
necessary changes to standalone-ha.xml.
I am running the following command: ./standalone.sh
--server-config=standalone-ha.xml -b=0.0.0.0
I am getting the below error:
Caused by: java.net.BindException: [UDP] /0.0.0.0 <http://0.0.0.0> is
not a valid address on any local network interface
at org.jgroups.util.Util.checkIfValidAddress(Util.java:3484)
at
org.jgroups.stack.Configurator.ensureValidBindAddresses(Configurator.java:903)
at
org.jgroups.stack.Configurator.setupProtocolStack(Configurator.java:118)
at
org.jgroups.stack.Configurator.setupProtocolStack(Configurator.java:57)
at org.jgroups.stack.ProtocolStack.setup(ProtocolStack.java:477)
at org.jgroups.JChannel.init(JChannel.java:854)
at org.jgroups.JChannel.<init>(JChannel.java:159)
at
org.jboss.as.clustering.jgroups.JChannelFactory$1.run(JChannelFactory.java:96)
at
org.jboss.as.clustering.jgroups.JChannelFactory$1.run(JChannelFactory.java:93)
at
org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:634)
... 7 more
I changed my keycloak.json as per the documentation for clustering.
Could you help me figure out what is the issue??
On Wed, Jan 13, 2016 at 12:08 AM, Stian Thorgersen
<sthorger(a)redhat.com <mailto:sthorger@redhat.com>> wrote:
If you're saying you can only access it using localhost, then run
it with "bin/standalone.sh -b 0.0.0.0" and it'll be bound to all
interfaces.
On 12 January 2016 at 16:26, Revanth Ayalasomayajula
<revanth(a)arvindinternet.com <mailto:revanth@arvindinternet.com>>
wrote:
I mean, i am not able to access it using it public ip.
On Tue, Jan 12, 2016 at 8:18 PM, Stian Thorgersen
<sthorger(a)redhat.com <mailto:sthorger@redhat.com>> wrote:
I don't know what you mean that you can't access from
outside world, but if you're running a cluster you'll need
a load balance in front. Apache, Nginx or even Undertow
would do that for you.
You add nodes by just running more nodes on the same
subnet and they'll discover themselves.
On 12 January 2016 at 12:37, Revanth Ayalasomayajula
<revanth(a)arvindinternet.com
<mailto:revanth@arvindinternet.com>> wrote:
Hi,
I have a few applications that are using Keycloak 1.5
and I now want to cluster it. I had followed this link
(https://docs.jboss.org/keycloak/docs/1.1.0.Beta2/userguide/html/clusterin...)
but i am not able to access this server from outside
world and I also wanted to know how I can add nodes to
my cluster. Could anyone please help me out in this
respect.
Thanks.
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-user
10:42 p.m.
I believe JGroups has problems trying to bind to all interfaces (with
0.0.0.0) you need to set the IP address you want to bind to properly work.
Setting -Djgroups.bind_addr=127.0.0.1
should
also
work too.
Jorge Solórzano
http://www.jorsol.com
On Thu, Jan 28, 2016 at 5:29 AM, Marek Posolda <mposolda(a)redhat.com> wrote:
You can try to use "-b 0.0.0.0" instead of
"-b=0.0.0.0"
Marek
On 28/01/16 11:25, Revanth Ayalasomayajula wrote:
Hi I am using keycloak1.5.0 and want to cluster it, I made the changes
necessary changes to standalone-ha.xml.
I am running the following command: ./standalone.sh
--server-config=standalone-ha.xml -b=0.0.0.0
I am getting the below error:
Caused by: java.net.BindException: [UDP] /0.0.0.0 is not a valid address
on any local network interface
at org.jgroups.util.Util.checkIfValidAddress(Util.java:3484)
at
org.jgroups.stack.Configurator.ensureValidBindAddresses(Configurator.java:903)
at
org.jgroups.stack.Configurator.setupProtocolStack(Configurator.java:118)
at
org.jgroups.stack.Configurator.setupProtocolStack(Configurator.java:57)
at org.jgroups.stack.ProtocolStack.setup(ProtocolStack.java:477)
at org.jgroups.JChannel.init(JChannel.java:854)
at org.jgroups.JChannel.<init>(JChannel.java:159)
at
org.jboss.as.clustering.jgroups.JChannelFactory$1.run(JChannelFactory.java:96)
at
org.jboss.as.clustering.jgroups.JChannelFactory$1.run(JChannelFactory.java:93)
at
org.wildfly.security.manager.WildFlySecurityManager.doChecked(WildFlySecurityManager.java:634)
... 7 more
I changed my keycloak.json as per the documentation for clustering.
Could you help me figure out what is the issue??
On Wed, Jan 13, 2016 at 12:08 AM, Stian Thorgersen <sthorger(a)redhat.com>
wrote:
> If you're saying you can only access it using localhost, then run it with
> "bin/standalone.sh -b 0.0.0.0" and it'll be bound to all interfaces.
>
> On 12 January 2016 at 16:26, Revanth Ayalasomayajula <
> <revanth@arvindinternet.com>revanth(a)arvindinternet.com> wrote:
>
>> I mean, i am not able to access it using it public ip.
>>
>>
>>
>> On Tue, Jan 12, 2016 at 8:18 PM, Stian Thorgersen <sthorger(a)redhat.com>
>> wrote:
>>
>>> I don't know what you mean that you can't access from outside world,
>>> but if you're running a cluster you'll need a load balance in front.
>>> Apache, Nginx or even Undertow would do that for you.
>>>
>>> You add nodes by just running more nodes on the same subnet and they'll
>>> discover themselves.
>>>
>>> On 12 January 2016 at 12:37, Revanth Ayalasomayajula <
>>> <revanth@arvindinternet.com>revanth(a)arvindinternet.com> wrote:
>>>
>>>> Hi,
>>>>
>>>> I have a few applications that are using Keycloak 1.5 and I now want
>>>> to cluster it. I had followed this link (
>>>>
<https://docs.jboss.org/keycloak/docs/1.1.0.Beta2/userguide/html/clusterin...
>>>>
https://docs.jboss.org/keycloak/docs/1.1.0.Beta2/userguide/html/clusterin...)
>>>> but i am not able to access this server from outside world and I also
>>>> wanted to know how I can add nodes to my cluster. Could anyone please
help
>>>> me out in this respect.
>>>>
>>>> Thanks.
>>>>
>>>> _______________________________________________
>>>> keycloak-user mailing list
>>>> keycloak-user(a)lists.jboss.org
>>>> https://lists.jboss.org/mailman/listinfo/keycloak-user
>>>>
>>>
>>>
>>
>
_______________________________________________
keycloak-user mailing
listkeycloak-user@lists.jboss.orghttps://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-user
3022
days inactive
3038
days old
6 comments
4 participants
participants (4)
-
Jorge Solórzano -
Marek Posolda -
Revanth Ayalasomayajula -
Stian Thorgersen