12:48 p.m.
Hi All,
We are using keycloak of version 3.3.0.CR2.
I have my Keycloak integrated with LDAP.
I have configured many applications to have SSO with Keycloak. I have done all the
configuration to have LDAP integration with Keycloak. I have also configured Group mappers
so that groups from LDAP are also synced to LDAP.
eg:
Users in LDAP: "user1"
Groups in LDAP: "group1","group2"
When i login into one of my application that is configured to have SSO with keycloak with
user "user1" that is present in group "group1"...that user entry gets
shown in the Keycloak UI page and we can also see the groups mapped to it.
Now I add the user "user1" into another group "group2"...
But now the newly added group is not reflected when click on User> Group Mapping.
Why Is this happening??
What is the solution to continuously sync the users with the groups they are present
in/added newly automatically????
Thanks,
Lahari
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
2:36 p.m.
hi, we recently experienced similar and found it to be user cache. there
is a setting in the ldap config which allows you to specify the cache
value. however, i found this to take no effect and eventually set a hard
eviction rate to the configuration in the standalone-ha.xml for user cache.
On Fri, Mar 16, 2018 at 11:48 AM, Lahari Guntha <lahari.guntha(a)tcs.com>
wrote:
Hi All,
We are using keycloak of version 3.3.0.CR2.
I have my Keycloak integrated with LDAP.
I have configured many applications to have SSO with Keycloak. I have
done all the configuration to have LDAP integration with Keycloak. I have
also configured Group mappers so that groups from LDAP are also synced to
LDAP.
eg:
Users in LDAP: "user1"
Groups in LDAP: "group1","group2"
When i login into one of my application that is configured to have SSO
with keycloak with user "user1" that is present in group
"group1"...that
user entry gets shown in the Keycloak UI page and we can also see the
groups mapped to it.
Now I add the user "user1" into another group "group2"...
But now the newly added group is not reflected when click on User> Group
Mapping.
Why Is this happening??
What is the solution to continuously sync the users with the groups they
are present in/added newly automatically????
Thanks,
Lahari
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-user
2:46 p.m.
???Hi,
Thanks Simon.
Does setting "Cache Policy" to "No Cache" option under "User
Federation" makes any sense in this case?? as shown below?
[cid:69b609f1-3662-4933-b316-29896ba797fe]
Could someone explain the "Eviction" policy for user cache??
What exactly will happen???
?
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58(a)gmail.com>
Sent: 16 March 2018 19:06
To: Lahari Guntha
Cc: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
hi, we recently experienced similar and found it to be user cache. there is a setting in
the ldap config which allows you to specify the cache value. however, i found this to
take no effect and eventually set a hard eviction rate to the configuration in the
standalone-ha.xml for user cache.
On Fri, Mar 16, 2018 at 11:48 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>> wrote:
Hi All,
We are using keycloak of version 3.3.0.CR2.
I have my Keycloak integrated with LDAP.
I have configured many applications to have SSO with Keycloak. I have done all the
configuration to have LDAP integration with Keycloak. I have also configured Group mappers
so that groups from LDAP are also synced to LDAP.
eg:
Users in LDAP: "user1"
Groups in LDAP: "group1","group2"
When i login into one of my application that is configured to have SSO with keycloak with
user "user1" that is present in group "group1"...that user entry gets
shown in the Keycloak UI page and we can also see the groups mapped to it.
Now I add the user "user1" into another group "group2"...
But now the newly added group is not reflected when click on User> Group Mapping.
Why Is this happening??
What is the solution to continuously sync the users with the groups they are present
in/added newly automatically????
Thanks,
Lahari
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
4:10 p.m.
if you are referring to the standard entry
I simply added the expiration value to the existing local-cache entry for
users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
</local-cache>
then LRU means least recently used. so it will cache 10,000 users and
evict the least recently used when cache limit is reached. obviously this
will only evict users if you have greater than 10,000 in your system. So
in my case i changed to the following
I simply added the expiration value to the existing local-cache entry for
users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
<expiration max-idle="1200000"/>
</local-cache>
which will additionally expire entries after 20 minutes.
full explanation can be found here https://docs.jboss.org/
author/display/WFLY10/Infinispan+Subsystem
On Fri, Mar 23, 2018 at 1:46 PM, Lahari Guntha <lahari.guntha(a)tcs.com>
wrote:
???Hi,
Thanks Simon.
Does setting "Cache Policy" to "No Cache" option under "User
Federation"
makes any sense in this case?? as shown below?
[cid:69b609f1-3662-4933-b316-29896ba797fe]
Could someone explain the "Eviction" policy for user cache??
What exactly will happen???
?
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58(a)gmail.com>
Sent: 16 March 2018 19:06
To: Lahari Guntha
Cc: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
hi, we recently experienced similar and found it to be user cache. there
is a setting in the ldap config which allows you to specify the cache
value. however, i found this to take no effect and eventually set a hard
eviction rate to the configuration in the standalone-ha.xml for user cache.
On Fri, Mar 16, 2018 at 11:48 AM, Lahari Guntha <lahari.guntha(a)tcs.com
<mailto:lahari.guntha@tcs.com>> wrote:
Hi All,
We are using keycloak of version 3.3.0.CR2.
I have my Keycloak integrated with LDAP.
I have configured many applications to have SSO with Keycloak. I have
done all the configuration to have LDAP integration with Keycloak. I have
also configured Group mappers so that groups from LDAP are also synced to
LDAP.
eg:
Users in LDAP: "user1"
Groups in LDAP: "group1","group2"
When i login into one of my application that is configured to have SSO
with keycloak with user "user1" that is present in group
"group1"...that
user entry gets shown in the Keycloak UI page and we can also see the
groups mapped to it.
Now I add the user "user1" into another group "group2"...
But now the newly added group is not reflected when click on User> Group
Mapping.
Why Is this happening??
What is the solution to continuously sync the users with the groups they
are present in/added newly automatically????
Thanks,
Lahari
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-user
7:27 a.m.
?Hi,
Do we ?need to reload the keycloak server after changing the standalone.xml???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58(a)gmail.com>
Sent: 23 March 2018 20:40
To: Lahari Guntha
Cc: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
if you are referring to the standard entry
I simply added the expiration value to the existing local-cache entry for users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
</local-cache>
then LRU means least recently used. so it will cache 10,000 users and evict the least
recently used when cache limit is reached. obviously this will only evict users if you
have greater than 10,000 in your system. So in my case i changed to the following
I simply added the expiration value to the existing local-cache entry for users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
<expiration max-idle="1200000"/>
</local-cache>
which will additionally expire entries after 20 minutes.
full explanation can be found here
https://docs.jboss.org/author/display/WFLY10/Infinispan+Subsystem
On Fri, Mar 23, 2018 at 1:46 PM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>> wrote:
???Hi,
Thanks Simon.
Does setting "Cache Policy" to "No Cache" option under "User
Federation" makes any sense in this case?? as shown below?
[cid:69b609f1-3662-4933-b316-29896ba797fe]
Could someone explain the "Eviction" policy for user cache??
What exactly will happen???
?
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>
Sent: 16 March 2018 19:06
To: Lahari Guntha
Cc: keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
Subject: Re: [keycloak-user] Group-Mapping
hi, we recently experienced similar and found it to be user cache. there is a setting in
the ldap config which allows you to specify the cache value. however, i found this to
take no effect and eventually set a hard eviction rate to the configuration in the
standalone-ha.xml for user cache.
On Fri, Mar 16, 2018 at 11:48 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>>
wrote:
Hi All,
We are using keycloak of version 3.3.0.CR2.
I have my Keycloak integrated with LDAP.
I have configured many applications to have SSO with Keycloak. I have done all the
configuration to have LDAP integration with Keycloak. I have also configured Group mappers
so that groups from LDAP are also synced to LDAP.
eg:
Users in LDAP: "user1"
Groups in LDAP: "group1","group2"
When i login into one of my application that is configured to have SSO with keycloak with
user "user1" that is present in group "group1"...that user entry gets
shown in the Keycloak UI page and we can also see the groups mapped to it.
Now I add the user "user1" into another group "group2"...
But now the newly added group is not reflected when click on User> Group Mapping.
Why Is this happening??
What is the solution to continuously sync the users with the groups they are present
in/added newly automatically????
Thanks,
Lahari
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
10:43 a.m.
if standalone-ha.xml is changed then a restart is necessary.
Simon.
On Tue, Mar 27, 2018 at 6:27 AM, Lahari Guntha <lahari.guntha(a)tcs.com>
wrote:
?Hi,
Do we ?need to reload the keycloak server after changing the
standalone.xml???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58(a)gmail.com>
Sent: 23 March 2018 20:40
To: Lahari Guntha
Cc: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
if you are referring to the standard entry
I simply added the expiration value to the existing local-cache entry for
users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
</local-cache>
then LRU means least recently used. so it will cache 10,000 users and
evict the least recently used when cache limit is reached. obviously this
will only evict users if you have greater than 10,000 in your system. So
in my case i changed to the following
I simply added the expiration value to the existing local-cache entry for
users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
<expiration max-idle="1200000"/>
</local-cache>
which will additionally expire entries after 20 minutes.
full explanation can be found here https://docs.jboss.org/author/
display/WFLY10/Infinispan+Subsystem
On Fri, Mar 23, 2018 at 1:46 PM, Lahari Guntha <lahari.guntha(a)tcs.com
<mailto:lahari.guntha@tcs.com>> wrote:
???Hi,
Thanks Simon.
Does setting "Cache Policy" to "No Cache" option under "User
Federation"
makes any sense in this case?? as shown below?
[cid:69b609f1-3662-4933-b316-29896ba797fe]
Could someone explain the "Eviction" policy for user cache??
What exactly will happen???
?
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>
Sent: 16 March 2018 19:06
To: Lahari Guntha
Cc: keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
Subject: Re: [keycloak-user] Group-Mapping
hi, we recently experienced similar and found it to be user cache. there
is a setting in the ldap config which allows you to specify the cache
value. however, i found this to take no effect and eventually set a hard
eviction rate to the configuration in the standalone-ha.xml for user cache.
On Fri, Mar 16, 2018 at 11:48 AM, Lahari Guntha <lahari.guntha(a)tcs.com
<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:l
ahari.guntha(a)tcs.com>>> wrote:
Hi All,
We are using keycloak of version 3.3.0.CR2.
I have my Keycloak integrated with LDAP.
I have configured many applications to have SSO with Keycloak. I have
done all the configuration to have LDAP integration with Keycloak. I have
also configured Group mappers so that groups from LDAP are also synced to
LDAP.
eg:
Users in LDAP: "user1"
Groups in LDAP: "group1","group2"
When i login into one of my application that is configured to have SSO
with keycloak with user "user1" that is present in group
"group1"...that
user entry gets shown in the Keycloak UI page and we can also see the
groups mapped to it.
Now I add the user "user1" into another group "group2"...
But now the newly added group is not reflected when click on User> Group
Mapping.
Why Is this happening??
What is the solution to continuously sync the users with the groups they
are present in/added newly automatically????
Thanks,
Lahari
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org
><mailto:keycloak-user@lists.jboss.org<mailto:ke
ycloak-user(a)lists.jboss.org>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-user
6:58 a.m.
Hi Simon,
We have our keycloak in standalone configuration. I have my keycloak running as a docker
container. I loged into the container and manually changed the standalone.xml....and then
restarted the server using the below command:
docker exec {CONTAINER} /opt/jboss/keycloak/bin/jboss-cli.sh --connect
"reload"
I have all my users synced to Keycloak. Now I have an entry of a user "User1" in
keycloak. This user is not present in any group in LDAP...Now I added the user
"User1" in one of the group in LDAP....now since I have set the "Eviction
rate"......I should get the updated group of the user that the user is recently added
to in Keycloak UI when I check the "GroupMappings" for that particular
user....
Why am I not able to see the groups that the user were added to even after setting the
eviction time??
Should I login into any of the application that is integrated with SSO so that I get the
User with their proper groups???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58(a)gmail.com>
Sent: 27 March 2018 14:13
To: Lahari Guntha
Cc: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
if standalone-ha.xml is changed then a restart is necessary.
Simon.
On Tue, Mar 27, 2018 at 6:27 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>> wrote:
?Hi,
Do we ?need to reload the keycloak server after changing the standalone.xml???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>
Sent: 23 March 2018 20:40
To: Lahari Guntha
Cc: keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
Subject: Re: [keycloak-user] Group-Mapping
if you are referring to the standard entry
I simply added the expiration value to the existing local-cache entry for users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
</local-cache>
then LRU means least recently used. so it will cache 10,000 users and evict the least
recently used when cache limit is reached. obviously this will only evict users if you
have greater than 10,000 in your system. So in my case i changed to the following
I simply added the expiration value to the existing local-cache entry for users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
<expiration max-idle="1200000"/>
</local-cache>
which will additionally expire entries after 20 minutes.
full explanation can be found here
https://docs.jboss.org/author/display/WFLY10/Infinispan+Subsystem
On Fri, Mar 23, 2018 at 1:46 PM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>>
wrote:
???Hi,
Thanks Simon.
Does setting "Cache Policy" to "No Cache" option under "User
Federation" makes any sense in this case?? as shown below?
[cid:69b609f1-3662-4933-b316-29896ba797fe]
Could someone explain the "Eviction" policy for user cache??
What exactly will happen???
?
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne
<simonpayne58@gmail.com<mailto:simonpayne58@gmail.com><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>>
Sent: 16 March 2018 19:06
To: Lahari Guntha
Cc:
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>
Subject: Re: [keycloak-user] Group-Mapping
hi, we recently experienced similar and found it to be user cache. there is a setting in
the ldap config which allows you to specify the cache value. however, i found this to
take no effect and eventually set a hard eviction rate to the configuration in the
standalone-ha.xml for user cache.
On Fri, Mar 16, 2018 at 11:48 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>>>
wrote:
Hi All,
We are using keycloak of version 3.3.0.CR2.
I have my Keycloak integrated with LDAP.
I have configured many applications to have SSO with Keycloak. I have done all the
configuration to have LDAP integration with Keycloak. I have also configured Group mappers
so that groups from LDAP are also synced to LDAP.
eg:
Users in LDAP: "user1"
Groups in LDAP: "group1","group2"
When i login into one of my application that is configured to have SSO with keycloak with
user "user1" that is present in group "group1"...that user entry gets
shown in the Keycloak UI page and we can also see the groups mapped to it.
Now I add the user "user1" into another group "group2"...
But now the newly added group is not reflected when click on User> Group Mapping.
Why Is this happening??
What is the solution to continuously sync the users with the groups they are present
in/added newly automatically????
Thanks,
Lahari
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
7:04 a.m.
Hi Simon,
We have our keycloak in standalone configuration. I have my keycloak running as a docker
container. I loged into the container and manually changed the standalone.xml....and then
restarted the server using the below command:
docker exec {CONTAINER} /opt/jboss/keycloak/bin/jboss-cli.sh --connect
"reload"
I have all my users synced to Keycloak. Now I have an entry of a user "User1" in
keycloak. This user is not present in any group in LDAP...Now I added the user
"User1" in one of the group in LDAP....now since I have set the "Eviction
rate"......I should get the updated group of the user that the user is recently added
to in Keycloak UI when I check the "GroupMappings" for that particular
user....
Why am I not able to see the groups that the user were added to even after setting the
eviction time??
Should I login into any of the application that is integrated with SSO so that I get the
User with their proper groups???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58(a)gmail.com>
Sent: 27 March 2018 14:13
To: Lahari Guntha
Cc: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
if standalone-ha.xml is changed then a restart is necessary.
Simon.
On Tue, Mar 27, 2018 at 6:27 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>> wrote:
?Hi,
Do we ?need to reload the keycloak server after changing the standalone.xml???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>
Sent: 23 March 2018 20:40
To: Lahari Guntha
Cc: keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
Subject: Re: [keycloak-user] Group-Mapping
if you are referring to the standard entry
I simply added the expiration value to the existing local-cache entry for users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
</local-cache>
then LRU means least recently used. so it will cache 10,000 users and evict the least
recently used when cache limit is reached. obviously this will only evict users if you
have greater than 10,000 in your system. So in my case i changed to the following
I simply added the expiration value to the existing local-cache entry for users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
<expiration max-idle="1200000"/>
</local-cache>
which will additionally expire entries after 20 minutes.
full explanation can be found here
https://docs.jboss.org/author/display/WFLY10/Infinispan+Subsystem
On Fri, Mar 23, 2018 at 1:46 PM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>>
wrote:
???Hi,
Thanks Simon.
Does setting "Cache Policy" to "No Cache" option under "User
Federation" makes any sense in this case?? as shown below?
[cid:69b609f1-3662-4933-b316-29896ba797fe]
Could someone explain the "Eviction" policy for user cache??
What exactly will happen???
?
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne
<simonpayne58@gmail.com<mailto:simonpayne58@gmail.com><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>>
Sent: 16 March 2018 19:06
To: Lahari Guntha
Cc:
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>
Subject: Re: [keycloak-user] Group-Mapping
hi, we recently experienced similar and found it to be user cache. there is a setting in
the ldap config which allows you to specify the cache value. however, i found this to
take no effect and eventually set a hard eviction rate to the configuration in the
standalone-ha.xml for user cache.
On Fri, Mar 16, 2018 at 11:48 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>>>
wrote:
Hi All,
We are using keycloak of version 3.3.0.CR2.
I have my Keycloak integrated with LDAP.
I have configured many applications to have SSO with Keycloak. I have done all the
configuration to have LDAP integration with Keycloak. I have also configured Group mappers
so that groups from LDAP are also synced to LDAP.
eg:
Users in LDAP: "user1"
Groups in LDAP: "group1","group2"
When i login into one of my application that is configured to have SSO with keycloak with
user "user1" that is present in group "group1"...that user entry gets
shown in the Keycloak UI page and we can also see the groups mapped to it.
Now I add the user "user1" into another group "group2"...
But now the newly added group is not reflected when click on User> Group Mapping.
Why Is this happening??
What is the solution to continuously sync the users with the groups they are present
in/added newly automatically????
Thanks,
Lahari
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
7:06 a.m.
Hi All,
Could you please check the procedure I followed?? What are the further changes to be done
for the groups to sync into keycloak??
Thanks & Regards,
Lahari G
________________________________________
From: keycloak-user-bounces(a)lists.jboss.org <keycloak-user-bounces(a)lists.jboss.org>
on behalf of Lahari Guntha
Sent: 28 March 2018 10:34
To: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
Hi Simon,
We have our keycloak in standalone configuration. I have my keycloak running as a docker
container. I loged into the container and manually changed the standalone.xml....and then
restarted the server using the below command:
docker exec {CONTAINER} /opt/jboss/keycloak/bin/jboss-cli.sh --connect "reload"
I have all my users synced to Keycloak. Now I have an entry of a user "User1" in
keycloak. This user is not present in any group in LDAP...Now I added the user
"User1" in one of the group in LDAP....now since I have set the "Eviction
rate"......I should get the updated group of the user that the user is recently added
to in Keycloak UI when I check the "GroupMappings" for that particular user....
Why am I not able to see the groups that the user were added to even after setting the
eviction time??
Should I login into any of the application that is integrated with SSO so that I get the
User with their proper groups???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58(a)gmail.com>
Sent: 27 March 2018 14:13
To: Lahari Guntha
Cc: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
if standalone-ha.xml is changed then a restart is necessary.
Simon.
On Tue, Mar 27, 2018 at 6:27 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>> wrote:
?Hi,
Do we ?need to reload the keycloak server after changing the standalone.xml???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>
Sent: 23 March 2018 20:40
To: Lahari Guntha
Cc: keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
Subject: Re: [keycloak-user] Group-Mapping
if you are referring to the standard entry
I simply added the expiration value to the existing local-cache entry for users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
</local-cache>
then LRU means least recently used. so it will cache 10,000 users and evict the least
recently used when cache limit is reached. obviously this will only evict users if you
have greater than 10,000 in your system. So in my case i changed to the following
I simply added the expiration value to the existing local-cache entry for users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
<expiration max-idle="1200000"/>
</local-cache>
which will additionally expire entries after 20 minutes.
full explanation can be found here
https://docs.jboss.org/author/display/WFLY10/Infinispan+Subsystem
On Fri, Mar 23, 2018 at 1:46 PM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>>
wrote:
???Hi,
Thanks Simon.
Does setting "Cache Policy" to "No Cache" option under "User
Federation" makes any sense in this case?? as shown below?
[cid:69b609f1-3662-4933-b316-29896ba797fe]
Could someone explain the "Eviction" policy for user cache??
What exactly will happen???
?
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne
<simonpayne58@gmail.com<mailto:simonpayne58@gmail.com><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>>
Sent: 16 March 2018 19:06
To: Lahari Guntha
Cc:
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>
Subject: Re: [keycloak-user] Group-Mapping
hi, we recently experienced similar and found it to be user cache. there is a setting in
the ldap config which allows you to specify the cache value. however, i found this to
take no effect and eventually set a hard eviction rate to the configuration in the
standalone-ha.xml for user cache.
On Fri, Mar 16, 2018 at 11:48 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>>>
wrote:
Hi All,
We are using keycloak of version 3.3.0.CR2.
I have my Keycloak integrated with LDAP.
I have configured many applications to have SSO with Keycloak. I have done all the
configuration to have LDAP integration with Keycloak. I have also configured Group mappers
so that groups from LDAP are also synced to LDAP.
eg:
Users in LDAP: "user1"
Groups in LDAP: "group1","group2"
When i login into one of my application that is configured to have SSO with keycloak with
user "user1" that is present in group "group1"...that user entry gets
shown in the Keycloak UI page and we can also see the groups mapped to it.
Now I add the user "user1" into another group "group2"...
But now the newly added group is not reflected when click on User> Group Mapping.
Why Is this happening??
What is the solution to continuously sync the users with the groups they are present
in/added newly automatically????
Thanks,
Lahari
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-user
5:20 p.m.
have you checked the 'user groups retrieve strategy' on the mappers config
is correct for your need?
otherwise it might only sync on first time and not when LDAP attributes etc
change.
On Tue, Apr 3, 2018 at 6:06 AM, Lahari Guntha <lahari.guntha(a)tcs.com> wrote:
Hi All,
Could you please check the procedure I followed?? What are the further
changes to be done for the groups to sync into keycloak??
Thanks & Regards,
Lahari G
________________________________________
From: keycloak-user-bounces(a)lists.jboss.org <keycloak-user-bounces@lists.
jboss.org> on behalf of Lahari Guntha
Sent: 28 March 2018 10:34
To: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
Hi Simon,
We have our keycloak in standalone configuration. I have my keycloak
running as a docker container. I loged into the container and manually
changed the standalone.xml....and then restarted the server using the below
command:
docker exec {CONTAINER} /opt/jboss/keycloak/bin/jboss-cli.sh --connect
"reload"
I have all my users synced to Keycloak. Now I have an entry of a user
"User1" in keycloak. This user is not present in any group in LDAP...Now I
added the user "User1" in one of the group in LDAP....now since I have set
the "Eviction rate"......I should get the updated group of the user that
the user is recently added to in Keycloak UI when I check the
"GroupMappings" for that particular user....
Why am I not able to see the groups that the user were added to even after
setting the eviction time??
Should I login into any of the application that is integrated with SSO so
that I get the User with their proper groups???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58(a)gmail.com>
Sent: 27 March 2018 14:13
To: Lahari Guntha
Cc: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
if standalone-ha.xml is changed then a restart is necessary.
Simon.
On Tue, Mar 27, 2018 at 6:27 AM, Lahari Guntha <lahari.guntha(a)tcs.com
<mailto:lahari.guntha@tcs.com>> wrote:
?Hi,
Do we ?need to reload the keycloak server after changing the
standalone.xml???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>
Sent: 23 March 2018 20:40
To: Lahari Guntha
Cc: keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
Subject: Re: [keycloak-user] Group-Mapping
if you are referring to the standard entry
I simply added the expiration value to the existing local-cache entry for
users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
</local-cache>
then LRU means least recently used. so it will cache 10,000 users and
evict the least recently used when cache limit is reached. obviously this
will only evict users if you have greater than 10,000 in your system. So
in my case i changed to the following
I simply added the expiration value to the existing local-cache entry for
users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
<expiration max-idle="1200000"/>
</local-cache>
which will additionally expire entries after 20 minutes.
full explanation can be found here https://docs.jboss.org/author/
display/WFLY10/Infinispan+Subsystem
On Fri, Mar 23, 2018 at 1:46 PM, Lahari Guntha <lahari.guntha(a)tcs.com
<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:l
ahari.guntha(a)tcs.com>>> wrote:
???Hi,
Thanks Simon.
Does setting "Cache Policy" to "No Cache" option under "User
Federation"
makes any sense in this case?? as shown below?
[cid:69b609f1-3662-4933-b316-29896ba797fe]
Could someone explain the "Eviction" policy for user cache??
What exactly will happen???
?
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>
<mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>>
Sent: 16 March 2018 19:06
To: Lahari Guntha
Cc: keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org
><mailto:keycloak-user@lists.jboss.org<mailto:ke
ycloak-user(a)lists.jboss.org>>
Subject: Re: [keycloak-user] Group-Mapping
hi, we recently experienced similar and found it to be user cache. there
is a setting in the ldap config which allows you to specify the cache
value. however, i found this to take no effect and eventually set a hard
eviction rate to the configuration in the standalone-ha.xml for user cache.
On Fri, Mar 16, 2018 at 11:48 AM, Lahari Guntha <lahari.guntha(a)tcs.com
<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:l
ahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:l
ahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:la
hari.guntha(a)tcs.com>>>> wrote:
Hi All,
We are using keycloak of version 3.3.0.CR2.
I have my Keycloak integrated with LDAP.
I have configured many applications to have SSO with Keycloak. I have
done all the configuration to have LDAP integration with Keycloak. I have
also configured Group mappers so that groups from LDAP are also synced to
LDAP.
eg:
Users in LDAP: "user1"
Groups in LDAP: "group1","group2"
When i login into one of my application that is configured to have SSO
with keycloak with user "user1" that is present in group
"group1"...that
user entry gets shown in the Keycloak UI page and we can also see the
groups mapped to it.
Now I add the user "user1" into another group "group2"...
But now the newly added group is not reflected when click on User> Group
Mapping.
Why Is this happening??
What is the solution to continuously sync the users with the groups they
are present in/added newly automatically????
Thanks,
Lahari
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org
><mailto:keycloak-user@lists.jboss.org<mailto:ke
ycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:
keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<
mailto:keycloak-user@lists.jboss.org>>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org
><mailto:keycloak-user@lists.jboss.org<mailto:ke
ycloak-user(a)lists.jboss.org>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-user
7:42 a.m.
Hi Simon,
I have selected the " LOAD_GROUPS_BY_ MEMBER_ATTRIBUTE" for my 'user groups
retrieve strategy'. Using this the User-Group mapping is done only for the first
time..i.e if the user is added or removed from any group it is not getting reflected in
keycloak .
I cannot select "LOAD_GROUPS_BY_ MEMBER_ATTRIBUTE_RECURSIVELY" because it is
only suitable for "Active Directory" and we are using openLDAP .
Should I change the configuration??
Thanks & Regards,
Lahari
________________________________
From: Simon Payne <simonpayne58(a)gmail.com>
Sent: 09 April 2018 20:50
To: Lahari Guntha
Cc: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
have you checked the 'user groups retrieve strategy' on the mappers config is
correct for your need?
otherwise it might only sync on first time and not when LDAP attributes etc change.
On Tue, Apr 3, 2018 at 6:06 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>> wrote:
Hi All,
Could you please check the procedure I followed?? What are the further changes to be done
for the groups to sync into keycloak??
Thanks & Regards,
Lahari G
________________________________________
From:
keycloak-user-bounces@lists.jboss.org<mailto:keycloak-user-bounces@lists.jboss.org>
<keycloak-user-bounces@lists.jboss.org<mailto:keycloak-user-bounces@lists.jboss.org>>
on behalf of Lahari Guntha
Sent: 28 March 2018 10:34
To: keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
Subject: Re: [keycloak-user] Group-Mapping
Hi Simon,
We have our keycloak in standalone configuration. I have my keycloak running as a docker
container. I loged into the container and manually changed the standalone.xml....and then
restarted the server using the below command:
docker exec {CONTAINER} /opt/jboss/keycloak/bin/jboss-cli.sh --connect
"reload"
I have all my users synced to Keycloak. Now I have an entry of a user "User1" in
keycloak. This user is not present in any group in LDAP...Now I added the user
"User1" in one of the group in LDAP....now since I have set the "Eviction
rate"......I should get the updated group of the user that the user is recently added
to in Keycloak UI when I check the "GroupMappings" for that particular
user....
Why am I not able to see the groups that the user were added to even after setting the
eviction time??
Should I login into any of the application that is integrated with SSO so that I get the
User with their proper groups???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>
Sent: 27 March 2018 14:13
To: Lahari Guntha
Cc: keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
Subject: Re: [keycloak-user] Group-Mapping
if standalone-ha.xml is changed then a restart is necessary.
Simon.
On Tue, Mar 27, 2018 at 6:27 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>>
wrote:
?Hi,
Do we ?need to reload the keycloak server after changing the standalone.xml???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne
<simonpayne58@gmail.com<mailto:simonpayne58@gmail.com><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>>
Sent: 23 March 2018 20:40
To: Lahari Guntha
Cc:
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>
Subject: Re: [keycloak-user] Group-Mapping
if you are referring to the standard entry
I simply added the expiration value to the existing local-cache entry for users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
</local-cache>
then LRU means least recently used. so it will cache 10,000 users and evict the least
recently used when cache limit is reached. obviously this will only evict users if you
have greater than 10,000 in your system. So in my case i changed to the following
I simply added the expiration value to the existing local-cache entry for users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
<expiration max-idle="1200000"/>
</local-cache>
which will additionally expire entries after 20 minutes.
full explanation can be found here
https://docs.jboss.org/author/display/WFLY10/Infinispan+Subsystem
On Fri, Mar 23, 2018 at 1:46 PM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>>>
wrote:
???Hi,
Thanks Simon.
Does setting "Cache Policy" to "No Cache" option under "User
Federation" makes any sense in this case?? as shown below?
[cid:69b609f1-3662-4933-b316-29896ba797fe]
Could someone explain the "Eviction" policy for user cache??
What exactly will happen???
?
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne
<simonpayne58@gmail.com<mailto:simonpayne58@gmail.com><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>>>
Sent: 16 March 2018 19:06
To: Lahari Guntha
Cc:
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>>
Subject: Re: [keycloak-user] Group-Mapping
hi, we recently experienced similar and found it to be user cache. there is a setting in
the ldap config which allows you to specify the cache value. however, i found this to
take no effect and eventually set a hard eviction rate to the configuration in the
standalone-ha.xml for user cache.
On Fri, Mar 16, 2018 at 11:48 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>>>>
wrote:
Hi All,
We are using keycloak of version 3.3.0.CR2.
I have my Keycloak integrated with LDAP.
I have configured many applications to have SSO with Keycloak. I have done all the
configuration to have LDAP integration with Keycloak. I have also configured Group mappers
so that groups from LDAP are also synced to LDAP.
eg:
Users in LDAP: "user1"
Groups in LDAP: "group1","group2"
When i login into one of my application that is configured to have SSO with keycloak with
user "user1" that is present in group "group1"...that user entry gets
shown in the Keycloak UI page and we can also see the groups mapped to it.
Now I add the user "user1" into another group "group2"...
But now the newly added group is not reflected when click on User> Group Mapping.
Why Is this happening??
What is the solution to continuously sync the users with the groups they are present
in/added newly automatically????
Thanks,
Lahari
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
8:37 a.m.
It's hard to tell you whether to change or not without knowing what your
LDAP setup looks like..
the next thing i would check is where the relationship between the user
and the group is stored. Group and User will both have a membership
attribute. make sure you are selecting the the correct membership LDAP
attribute for the chosen DN.
On Tue, Apr 10, 2018 at 6:42 AM, Lahari Guntha <lahari.guntha(a)tcs.com>
wrote:
Hi Simon,
I have selected the " LOAD_GROUPS_BY_ MEMBER_ATTRIBUTE" for my 'user
groups retrieve strategy'. Using this the User-Group mapping is done only
for the first time..i.e if the user is added or removed from any group it
is not getting reflected in keycloak .
I cannot select "LOAD_GROUPS_BY_ MEMBER_ATTRIBUTE_RECURSIVELY" because it
is only suitable for "Active Directory" and we are using openLDAP .
Should I change the configuration??
Thanks & Regards,
Lahari
________________________________
From: Simon Payne <simonpayne58(a)gmail.com>
Sent: 09 April 2018 20:50
To: Lahari Guntha
Cc: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
have you checked the 'user groups retrieve strategy' on the mappers config
is correct for your need?
otherwise it might only sync on first time and not when LDAP attributes
etc change.
On Tue, Apr 3, 2018 at 6:06 AM, Lahari Guntha <lahari.guntha(a)tcs.com
<mailto:lahari.guntha@tcs.com>> wrote:
Hi All,
Could you please check the procedure I followed?? What are the further
changes to be done for the groups to sync into keycloak??
Thanks & Regards,
Lahari G
________________________________________
From: keycloak-user-bounces@lists.jboss.org<mailto:keycloak-
user-bounces(a)lists.jboss.org> <keycloak-user-bounces(a)lists.jboss.org
<mailto:keycloak-user-bounces@lists.jboss.org>> on behalf of Lahari
Guntha
Sent: 28 March 2018 10:34
To: keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
Subject: Re: [keycloak-user] Group-Mapping
Hi Simon,
We have our keycloak in standalone configuration. I have my keycloak
running as a docker container. I loged into the container and manually
changed the standalone.xml....and then restarted the server using the below
command:
docker exec {CONTAINER} /opt/jboss/keycloak/bin/jboss-cli.sh --connect
"reload"
I have all my users synced to Keycloak. Now I have an entry of a user
"User1" in keycloak. This user is not present in any group in LDAP...Now I
added the user "User1" in one of the group in LDAP....now since I have set
the "Eviction rate"......I should get the updated group of the user that
the user is recently added to in Keycloak UI when I check the
"GroupMappings" for that particular user....
Why am I not able to see the groups that the user were added to even after
setting the eviction time??
Should I login into any of the application that is integrated with SSO so
that I get the User with their proper groups???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>
Sent: 27 March 2018 14:13
To: Lahari Guntha
Cc: keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
Subject: Re: [keycloak-user] Group-Mapping
if standalone-ha.xml is changed then a restart is necessary.
Simon.
On Tue, Mar 27, 2018 at 6:27 AM, Lahari Guntha <lahari.guntha(a)tcs.com
<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:l
ahari.guntha(a)tcs.com>>> wrote:
?Hi,
Do we ?need to reload the keycloak server after changing the
standalone.xml???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>
<mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>>
Sent: 23 March 2018 20:40
To: Lahari Guntha
Cc: keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org
><mailto:keycloak-user@lists.jboss.org<mailto:ke
ycloak-user(a)lists.jboss.org>>
Subject: Re: [keycloak-user] Group-Mapping
if you are referring to the standard entry
I simply added the expiration value to the existing local-cache entry for
users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
</local-cache>
then LRU means least recently used. so it will cache 10,000 users and
evict the least recently used when cache limit is reached. obviously this
will only evict users if you have greater than 10,000 in your system. So
in my case i changed to the following
I simply added the expiration value to the existing local-cache entry for
users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
<expiration max-idle="1200000"/>
</local-cache>
which will additionally expire entries after 20 minutes.
full explanation can be found here https://docs.jboss.org/author/
display/WFLY10/Infinispan+Subsystem
On Fri, Mar 23, 2018 at 1:46 PM, Lahari Guntha <lahari.guntha(a)tcs.com
<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:l
ahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:l
ahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:la
hari.guntha(a)tcs.com>>>> wrote:
???Hi,
Thanks Simon.
Does setting "Cache Policy" to "No Cache" option under "User
Federation"
makes any sense in this case?? as shown below?
[cid:69b609f1-3662-4933-b316-29896ba797fe]
Could someone explain the "Eviction" policy for user cache??
What exactly will happen???
?
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>
<mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>><mailto:
simonpayne58@gmail.com<mailto:simonpayne58@gmail.com><mailto:simonpayne58@
gmail.com<mailto:simonpayne58@gmail.com>>>>
Sent: 16 March 2018 19:06
To: Lahari Guntha
Cc: keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org
><mailto:keycloak-user@lists.jboss.org<mailto:ke
ycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:
keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<
mailto:keycloak-user@lists.jboss.org>>>
Subject: Re: [keycloak-user] Group-Mapping
hi, we recently experienced similar and found it to be user cache. there
is a setting in the ldap config which allows you to specify the cache
value. however, i found this to take no effect and eventually set a hard
eviction rate to the configuration in the standalone-ha.xml for user cache.
On Fri, Mar 16, 2018 at 11:48 AM, Lahari Guntha <lahari.guntha(a)tcs.com
<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:l
ahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:l
ahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:la
hari.guntha@tcs.com>>><mailto:lahari.guntha@tcs.com<mailto:l
ahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:la
hari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:la
hari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lah
ari.guntha(a)tcs.com>>>>> wrote:
Hi All,
We are using keycloak of version 3.3.0.CR2.
I have my Keycloak integrated with LDAP.
I have configured many applications to have SSO with Keycloak. I have
done all the configuration to have LDAP integration with Keycloak. I have
also configured Group mappers so that groups from LDAP are also synced to
LDAP.
eg:
Users in LDAP: "user1"
Groups in LDAP: "group1","group2"
When i login into one of my application that is configured to have SSO
with keycloak with user "user1" that is present in group
"group1"...that
user entry gets shown in the Keycloak UI page and we can also see the
groups mapped to it.
Now I add the user "user1" into another group "group2"...
But now the newly added group is not reflected when click on User> Group
Mapping.
Why Is this happening??
What is the solution to continuously sync the users with the groups they
are present in/added newly automatically????
Thanks,
Lahari
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org
><mailto:keycloak-user@lists.jboss.org<mailto:ke
ycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:
keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<
mailto:keycloak-user@lists.jboss.org>>><mailto:keycloak-
user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org
>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.
jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:ke
ycloak-user(a)lists.jboss.org>>>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org
><mailto:keycloak-user@lists.jboss.org<mailto:ke
ycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:
keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<
mailto:keycloak-user@lists.jboss.org>>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org
><mailto:keycloak-user@lists.jboss.org<mailto:ke
ycloak-user(a)lists.jboss.org>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-user
12:21 p.m.
Hi Simon,
Please find the below configuration on the LDAP side:
User DN :uid=test,ou=users,dc=example,dc=com
Group DN: cn=testgroup,ou=groups,dc=example,dc=com
While integrating JIRA with LDAP we have the below configuration:
[cid:1ef7f51c-9752-492f-b7b1-63f898a8f525]
Here the user groups are getting properly synced.
For the configuration on Keycloak side please find the attached screenshots.
But still the groups are not syncing properly. i.e Whenever a user is added in a group
in LDAP..that particular groups the user is present in not getting reflected in
keycloak.
Could you please suggest us what configuration we are missing??
Thanks and Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58(a)gmail.com>
Sent: 10 April 2018 12:07
To: Lahari Guntha
Cc: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
It's hard to tell you whether to change or not without knowing what your LDAP setup
looks like..
the next thing i would check is where the relationship between the user and the group is
stored. Group and User will both have a membership attribute. make sure you are
selecting the the correct membership LDAP attribute for the chosen DN.
On Tue, Apr 10, 2018 at 6:42 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>> wrote:
Hi Simon,
I have selected the " LOAD_GROUPS_BY_ MEMBER_ATTRIBUTE" for my 'user groups
retrieve strategy'. Using this the User-Group mapping is done only for the first
time..i.e if the user is added or removed from any group it is not getting reflected in
keycloak .
I cannot select "LOAD_GROUPS_BY_ MEMBER_ATTRIBUTE_RECURSIVELY" because it is
only suitable for "Active Directory" and we are using openLDAP .
Should I change the configuration??
Thanks & Regards,
Lahari
________________________________
From: Simon Payne <simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>
Sent: 09 April 2018 20:50
To: Lahari Guntha
Cc: keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
Subject: Re: [keycloak-user] Group-Mapping
have you checked the 'user groups retrieve strategy' on the mappers config is
correct for your need?
otherwise it might only sync on first time and not when LDAP attributes etc change.
On Tue, Apr 3, 2018 at 6:06 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>>
wrote:
Hi All,
Could you please check the procedure I followed?? What are the further changes to be done
for the groups to sync into keycloak??
Thanks & Regards,
Lahari G
________________________________________
From:
keycloak-user-bounces@lists.jboss.org<mailto:keycloak-user-bounces@lists.jboss.org><mailto:keycloak-user-bounces@lists.jboss.org<mailto:keycloak-user-bounces@lists.jboss.org>>
<keycloak-user-bounces@lists.jboss.org<mailto:keycloak-user-bounces@lists.jboss.org><mailto:keycloak-user-bounces@lists.jboss.org<mailto:keycloak-user-bounces@lists.jboss.org>>>
on behalf of Lahari Guntha
Sent: 28 March 2018 10:34
To:
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>
Subject: Re: [keycloak-user] Group-Mapping
Hi Simon,
We have our keycloak in standalone configuration. I have my keycloak running as a docker
container. I loged into the container and manually changed the standalone.xml....and then
restarted the server using the below command:
docker exec {CONTAINER} /opt/jboss/keycloak/bin/jboss-cli.sh --connect
"reload"
I have all my users synced to Keycloak. Now I have an entry of a user "User1" in
keycloak. This user is not present in any group in LDAP...Now I added the user
"User1" in one of the group in LDAP....now since I have set the "Eviction
rate"......I should get the updated group of the user that the user is recently added
to in Keycloak UI when I check the "GroupMappings" for that particular
user....
Why am I not able to see the groups that the user were added to even after setting the
eviction time??
Should I login into any of the application that is integrated with SSO so that I get the
User with their proper groups???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne
<simonpayne58@gmail.com<mailto:simonpayne58@gmail.com><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>>
Sent: 27 March 2018 14:13
To: Lahari Guntha
Cc:
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>
Subject: Re: [keycloak-user] Group-Mapping
if standalone-ha.xml is changed then a restart is necessary.
Simon.
On Tue, Mar 27, 2018 at 6:27 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>>>
wrote:
?Hi,
Do we ?need to reload the keycloak server after changing the standalone.xml???
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne
<simonpayne58@gmail.com<mailto:simonpayne58@gmail.com><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>>>
Sent: 23 March 2018 20:40
To: Lahari Guntha
Cc:
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>>
Subject: Re: [keycloak-user] Group-Mapping
if you are referring to the standard entry
I simply added the expiration value to the existing local-cache entry for users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
</local-cache>
then LRU means least recently used. so it will cache 10,000 users and evict the least
recently used when cache limit is reached. obviously this will only evict users if you
have greater than 10,000 in your system. So in my case i changed to the following
I simply added the expiration value to the existing local-cache entry for users
<local-cache name="users">
<eviction max-entries="10000"
strategy="LRU"/>
<expiration max-idle="1200000"/>
</local-cache>
which will additionally expire entries after 20 minutes.
full explanation can be found here
https://docs.jboss.org/author/display/WFLY10/Infinispan+Subsystem
On Fri, Mar 23, 2018 at 1:46 PM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>>>>
wrote:
???Hi,
Thanks Simon.
Does setting "Cache Policy" to "No Cache" option under "User
Federation" makes any sense in this case?? as shown below?
[cid:69b609f1-3662-4933-b316-29896ba797fe]
Could someone explain the "Eviction" policy for user cache??
What exactly will happen???
?
Thanks & Regards,
Lahari G
________________________________
From: Simon Payne
<simonpayne58@gmail.com<mailto:simonpayne58@gmail.com><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com><mailto:simonpayne58@gmail.com<mailto:simonpayne58@gmail.com>>>>>
Sent: 16 March 2018 19:06
To: Lahari Guntha
Cc:
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>>>
Subject: Re: [keycloak-user] Group-Mapping
hi, we recently experienced similar and found it to be user cache. there is a setting in
the ldap config which allows you to specify the cache value. however, i found this to
take no effect and eventually set a hard eviction rate to the configuration in the
standalone-ha.xml for user cache.
On Fri, Mar 16, 2018 at 11:48 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com><mailto:lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>>>>>>
wrote:
Hi All,
We are using keycloak of version 3.3.0.CR2.
I have my Keycloak integrated with LDAP.
I have configured many applications to have SSO with Keycloak. I have done all the
configuration to have LDAP integration with Keycloak. I have also configured Group mappers
so that groups from LDAP are also synced to LDAP.
eg:
Users in LDAP: "user1"
Groups in LDAP: "group1","group2"
When i login into one of my application that is configured to have SSO with keycloak with
user "user1" that is present in group "group1"...that user entry gets
shown in the Keycloak UI page and we can also see the groups mapped to it.
Now I add the user "user1" into another group "group2"...
But now the newly added group is not reflected when click on User> Group Mapping.
Why Is this happening??
What is the solution to continuously sync the users with the groups they are present
in/added newly automatically????
Thanks,
Lahari
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>>>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org><mailto:keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
11:14 a.m.
Hi Lahari, i would suggest to try the LDAP group DN as
ou=groups,dc=example,dc=com rather than cn=testgroup,
ou=groups,dc=example,dc=com
here you need to specify the group tree.
regards,
Simon.
On Mon, May 7, 2018 at 11:21 AM, Lahari Guntha <lahari.guntha(a)tcs.com>
wrote:
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-user
2:48 p.m.
Hi Simon,
We have tried that. We updated the configuration of group DN in keycloak as
ou=groups,dc=example,dc=com.
But still the groups are not getting synced properly.
May I know whether am missing any configuration any where else??
Thanks and Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58(a)gmail.com>
Sent: 10 May 2018 14:44
To: Lahari Guntha
Cc: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
Hi Lahari, i would suggest to try the LDAP group DN as ou=groups,dc=example,dc=com rather
than cn=testgroup,ou=groups,dc=example,dc=com
here you need to specify the group tree.
regards,
Simon.
On Mon, May 7, 2018 at 11:21 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>> wrote:
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
9:28 a.m.
- You can try to manually clear the user cache in Keycloak admin
console. If the users are correctly updated after clearing the cache,
then you know it's the cache issue and you just need to tweak the cache.
Otherwise it's not cache issue and it's related to LDAP mapper
configuration.
- What's the edit mode of LDAP mapper? You need to use LDAP_ONLY or
READ_ONLY, but not IMPORT. With IMPORT, the roles are retrieved just
during very first sync.
Marek
On 10/05/18 14:48, Lahari Guntha wrote:
Hi Simon,
We have tried that. We updated the configuration of group DN in keycloak as
ou=groups,dc=example,dc=com.
But still the groups are not getting synced properly.
May I know whether am missing any configuration any where else??
Thanks and Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58(a)gmail.com>
Sent: 10 May 2018 14:44
To: Lahari Guntha
Cc: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
Hi Lahari, i would suggest to try the LDAP group DN as ou=groups,dc=example,dc=com rather
than cn=testgroup,ou=groups,dc=example,dc=com
here you need to specify the group tree.
regards,
Simon.
On Mon, May 7, 2018 at 11:21 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>> wrote:
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-user
7:32 a.m.
Hi All,
Did anyone face the same Issue of Group Syncing from LDAP to Keycloak??
Thanks and Regards,
Lahari Guntha
________________________________
From: Lahari Guntha
Sent: 10 May 2018 18:18
To: keycloak-user(a)lists.jboss.org
Cc: keycloak-user(a)lists.jboss.org; Aishwarya Bositty; Praveen Dhandu
Subject: Re: [keycloak-user] Group-Mapping
Hi Simon,
We have tried that. We updated the configuration of group DN in keycloak as
ou=groups,dc=example,dc=com.
But still the groups are not getting synced properly.
May I know whether am missing any configuration any where else??
Thanks and Regards,
Lahari G
________________________________
From: Simon Payne <simonpayne58(a)gmail.com>
Sent: 10 May 2018 14:44
To: Lahari Guntha
Cc: keycloak-user(a)lists.jboss.org
Subject: Re: [keycloak-user] Group-Mapping
Hi Lahari, i would suggest to try the LDAP group DN as ou=groups,dc=example,dc=com rather
than cn=testgroup,ou=groups,dc=example,dc=com
here you need to specify the group tree.
regards,
Simon.
On Mon, May 7, 2018 at 11:21 AM, Lahari Guntha
<lahari.guntha@tcs.com<mailto:lahari.guntha@tcs.com>> wrote:
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
2063
days inactive
2242
days old
16 comments
3 participants
participants (3)
-
Lahari Guntha -
Marek Posolda -
Simon Payne