1:10 p.m.
I was trying to use this login module with an application deployed on Wildfly 10:
org.keycloak.adapters.jaas.DirectAccessGrantsLoginModule
And it kind of worked.
By that I mean that when you log in, you are authenticated fine but then calling
HttpServletRequest.isUserInRole(xxx) did not work.
The reason is that JBoss (EAP and Wildfly I think) expects the roles in a specific group.
This page
https://docs.jboss.org/jbosssecurity/docs/6.0/security_guide/html/Login_M...
says:
"The JBossSX framework uses two well-known role sets with the names Roles and
CallerPrincipal.
The Roles group is the collection of Principals for the named roles as known in the
application domain under which the Subject has been authenticated. This role set is used
by methods like the EJBContext.isCallerInRole(String), which EJBs can use to see if the
current caller belongs to the named application domain role. The security interceptor
logic that performs method permission checks also uses this role set.
The CallerPrincipalGroup consists of the single Principal identity assigned to the user in
the application domain. The EJBContext.getCallerPrincipal() method uses the
CallerPrincipal to allow the application domain to map from the operation environment
identity to a user identity suitable for the application. If a Subject does not have a
CallerPrincipalGroup, the application identity is the same used for login."
A q&d patch of AbstractKeycloakLoginModule.java makes the whole thing work.
Am I doing something wrong?
Thank you.
2:23 a.m.
I recently did some example of the remote EJB client. You're right,
there are special groups on Wildfly, which JAAS Subject needs to be
member of.
See the example here [1] . Especially take a look at the security-domain
configuration and the "ConvertKEycloakRolesLoginModule", which needs to
be put to the chain after DirectAccessGrantsLoginModule.
Btv. if you are using web (HttpServletRequest etc), you should maybe
rather use our OIDC/SAML adapters? But maybe I am missing something in
your setup...
[1] https://github.com/mposolda/keycloak-remote-ejb
Marek
On 08/03/17 20:10, Amat, Juan (Nokia - US) wrote:
I was trying to use this login module with an application deployed on
Wildfly 10:
org.keycloak.adapters.jaas.DirectAccessGrantsLoginModule
And it kind of worked.
By that I mean that when you log in, you are authenticated fine but then calling
HttpServletRequest.isUserInRole(xxx) did not work.
The reason is that JBoss (EAP and Wildfly I think) expects the roles in a specific
group.
This page
https://docs.jboss.org/jbosssecurity/docs/6.0/security_guide/html/Login_M...
says:
"The JBossSX framework uses two well-known role sets with the names Roles and
CallerPrincipal.
The Roles group is the collection of Principals for the named roles as known in the
application domain under which the Subject has been authenticated. This role set is used
by methods like the EJBContext.isCallerInRole(String), which EJBs can use to see if the
current caller belongs to the named application domain role. The security interceptor
logic that performs method permission checks also uses this role set.
The CallerPrincipalGroup consists of the single Principal identity assigned to the user
in the application domain. The EJBContext.getCallerPrincipal() method uses the
CallerPrincipal to allow the application domain to map from the operation environment
identity to a user identity suitable for the application. If a Subject does not have a
CallerPrincipalGroup, the application identity is the same used for login."
A q&d patch of AbstractKeycloakLoginModule.java makes the whole thing work.
Am I doing something wrong?
Thank you.
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-user
8:33 a.m.
Thank you for the pointer.
I would have expected that this would be supported out of the box.
Another comment.
In the logout method of AbstractKeycloakLoginModule.java, we remove the
RolePrincipal.class principals from the subject's principals.
We can though configure the class used for the 'role' principal. Should this class
be used instead?
Juan.
-----Original Message-----
From: Marek Posolda [mailto:mposolda@redhat.com]
Sent: Thursday, March 09, 2017 12:23 AM
To: Amat, Juan (Nokia - US) <juan.amat(a)nokia.com>; keycloak-
user(a)lists.jboss.org
Subject: Re: [keycloak-user] JAAS plugin and roles
I recently did some example of the remote EJB client. You're right, there are
special groups on Wildfly, which JAAS Subject needs to be member of.
See the example here [1] . Especially take a look at the security-domain
configuration and the "ConvertKEycloakRolesLoginModule", which needs to be
put to the chain after DirectAccessGrantsLoginModule.
Btv. if you are using web (HttpServletRequest etc), you should maybe rather use
our OIDC/SAML adapters? But maybe I am missing something in your setup...
[1] https://github.com/mposolda/keycloak-remote-ejb
Marek
On 08/03/17 20:10, Amat, Juan (Nokia - US) wrote:
> I was trying to use this login module with an application deployed on Wildfly
10:
> org.keycloak.adapters.jaas.DirectAccessGrantsLoginModule
> And it kind of worked.
> By that I mean that when you log in, you are authenticated fine but
> then calling
> HttpServletRequest.isUserInRole(xxx) did not work.
>
> The reason is that JBoss (EAP and Wildfly I think) expects the roles in a specific
group.
>
> This page
https://docs.jboss.org/jbosssecurity/docs/6.0/security_guide/html/Login_Modu
les.html says:
>
> "The JBossSX framework uses two well-known role sets with the names Roles
and CallerPrincipal.
> The Roles group is the collection of Principals for the named roles as known in
the application domain under which the Subject has been authenticated. This
role set is used by methods like the EJBContext.isCallerInRole(String), which EJBs
can use to see if the current caller belongs to the named application domain
role. The security interceptor logic that performs method permission checks also
uses this role set.
> The CallerPrincipalGroup consists of the single Principal identity assigned to
the user in the application domain. The EJBContext.getCallerPrincipal() method
uses the CallerPrincipal to allow the application domain to map from the
operation environment identity to a user identity suitable for the application. If a
Subject does not have a CallerPrincipalGroup, the application identity is the
same used for login."
>
> A q&d patch of AbstractKeycloakLoginModule.java makes the whole thing
work.
>
> Am I doing something wrong?
>
> Thank you.
> _______________________________________________
> keycloak-user mailing list
> keycloak-user(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/keycloak-user
4:34 a.m.
On 09/03/17 15:33, Amat, Juan (Nokia - US) wrote:
Thank you for the pointer.
I would have expected that this would be supported out of the box.
If there is
enough people asking for it, we can add it though. Feel free
to create JIRA.
Another comment.
In the logout method of AbstractKeycloakLoginModule.java, we remove the
RolePrincipal.class principals from the subject's principals.
We can though configure the class used for the 'role' principal. Should this
class be used instead?
Yes, good point. Feel free to add that into the JIRA too.
Marek
Juan.
> -----Original Message-----
> From: Marek Posolda [mailto:mposolda@redhat.com]
> Sent: Thursday, March 09, 2017 12:23 AM
> To: Amat, Juan (Nokia - US) <juan.amat(a)nokia.com>; keycloak-
> user(a)lists.jboss.org
> Subject: Re: [keycloak-user] JAAS plugin and roles
>
> I recently did some example of the remote EJB client. You're right, there are
> special groups on Wildfly, which JAAS Subject needs to be member of.
>
> See the example here [1] . Especially take a look at the security-domain
> configuration and the "ConvertKEycloakRolesLoginModule", which needs to be
> put to the chain after DirectAccessGrantsLoginModule.
>
> Btv. if you are using web (HttpServletRequest etc), you should maybe rather use
> our OIDC/SAML adapters? But maybe I am missing something in your setup...
>
> [1] https://github.com/mposolda/keycloak-remote-ejb
>
> Marek
>
> On 08/03/17 20:10, Amat, Juan (Nokia - US) wrote:
>> I was trying to use this login module with an application deployed on Wildfly
> 10:
>> org.keycloak.adapters.jaas.DirectAccessGrantsLoginModule
>> And it kind of worked.
>> By that I mean that when you log in, you are authenticated fine but
>> then calling
>> HttpServletRequest.isUserInRole(xxx) did not work.
>>
>> The reason is that JBoss (EAP and Wildfly I think) expects the roles in a
specific
> group.
>> This page
> https://docs.jboss.org/jbosssecurity/docs/6.0/security_guide/html/Login_Modu
> les.html says:
>> "The JBossSX framework uses two well-known role sets with the names Roles
> and CallerPrincipal.
>> The Roles group is the collection of Principals for the named roles as known in
> the application domain under which the Subject has been authenticated. This
> role set is used by methods like the EJBContext.isCallerInRole(String), which EJBs
> can use to see if the current caller belongs to the named application domain
> role. The security interceptor logic that performs method permission checks also
> uses this role set.
>> The CallerPrincipalGroup consists of the single Principal identity assigned to
> the user in the application domain. The EJBContext.getCallerPrincipal() method
> uses the CallerPrincipal to allow the application domain to map from the
> operation environment identity to a user identity suitable for the application. If a
> Subject does not have a CallerPrincipalGroup, the application identity is the
> same used for login."
>> A q&d patch of AbstractKeycloakLoginModule.java makes the whole thing
> work.
>> Am I doing something wrong?
>>
>> Thank you.
>> _______________________________________________
>> keycloak-user mailing list
>> keycloak-user(a)lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/keycloak-user
2:26 p.m.
Created: https://issues.jboss.org/browse/KEYCLOAK-4567
Thank you.
-----Original Message-----
From: Marek Posolda [mailto:mposolda@redhat.com]
Sent: Friday, March 10, 2017 2:35 AM
To: Amat, Juan (Nokia - US) <juan.amat(a)nokia.com>; keycloak-
user(a)lists.jboss.org
Subject: Re: [keycloak-user] JAAS plugin and roles
On 09/03/17 15:33, Amat, Juan (Nokia - US) wrote:
> Thank you for the pointer.
>
> I would have expected that this would be supported out of the box.
If there is enough people asking for it, we can add it though. Feel free to create
JIRA.
>
> Another comment.
> In the logout method of AbstractKeycloakLoginModule.java, we remove the
RolePrincipal.class principals from the subject's principals.
> We can though configure the class used for the 'role' principal. Should
this
class be used instead?
Yes, good point. Feel free to add that into the JIRA too.
Marek
>
> Juan.
>> -----Original Message-----
>> From: Marek Posolda [mailto:mposolda@redhat.com]
>> Sent: Thursday, March 09, 2017 12:23 AM
>> To: Amat, Juan (Nokia - US) <juan.amat(a)nokia.com>; keycloak-
>> user(a)lists.jboss.org
>> Subject: Re: [keycloak-user] JAAS plugin and roles
>>
>> I recently did some example of the remote EJB client. You're right,
>> there are special groups on Wildfly, which JAAS Subject needs to be member
of.
>>
>> See the example here [1] . Especially take a look at the
>> security-domain configuration and the
>> "ConvertKEycloakRolesLoginModule", which needs to be put to the chain
after DirectAccessGrantsLoginModule.
>>
>> Btv. if you are using web (HttpServletRequest etc), you should maybe
>> rather use our OIDC/SAML adapters? But maybe I am missing something in
your setup...
>>
>> [1] https://github.com/mposolda/keycloak-remote-ejb
>>
>> Marek
>>
>> On 08/03/17 20:10, Amat, Juan (Nokia - US) wrote:
>>> I was trying to use this login module with an application deployed
>>> on Wildfly
>> 10:
>>> org.keycloak.adapters.jaas.DirectAccessGrantsLoginModule
>>> And it kind of worked.
>>> By that I mean that when you log in, you are authenticated fine but
>>> then calling
>>> HttpServletRequest.isUserInRole(xxx) did not work.
>>>
>>> The reason is that JBoss (EAP and Wildfly I think) expects the roles
>>> in a specific
>> group.
>>> This page
>> https://docs.jboss.org/jbosssecurity/docs/6.0/security_guide/html/Log
>> in_Modu
>> les.html says:
>>> "The JBossSX framework uses two well-known role sets with the names
>>> Roles
>> and CallerPrincipal.
>>> The Roles group is the collection of Principals for the named roles
>>> as known in
>> the application domain under which the Subject has been
>> authenticated. This role set is used by methods like the
>> EJBContext.isCallerInRole(String), which EJBs can use to see if the
>> current caller belongs to the named application domain role. The
>> security interceptor logic that performs method permission checks also uses
this role set.
>>> The CallerPrincipalGroup consists of the single Principal identity
>>> assigned to
>> the user in the application domain. The
>> EJBContext.getCallerPrincipal() method uses the CallerPrincipal to
>> allow the application domain to map from the operation environment
>> identity to a user identity suitable for the application. If a
>> Subject does not have a CallerPrincipalGroup, the application identity is the
same used for login."
>>> A q&d patch of AbstractKeycloakLoginModule.java makes the whole
>>> thing
>> work.
>>> Am I doing something wrong?
>>>
>>> Thank you.
>>> _______________________________________________
>>> keycloak-user mailing list
>>> keycloak-user(a)lists.jboss.org
>>> https://lists.jboss.org/mailman/listinfo/keycloak-user
3128
days inactive
3131
days old
4 comments
2 participants
participants (2)
-
Amat, Juan (Nokia - US) -
Marek Posolda