6:05 p.m.
Using of JQuery 1.5 causes that JQuery selectors are not escaped properly
-------------------------------------------------------------------------
Key: ARQAJO-101
URL: https://issues.jboss.org/browse/ARQAJO-101
Project: Arquillian Ajocado
Issue Type: Bug
Components: core
Affects Versions: 1.0.0.CR2
Environment: Ajocado 1.0.0-SNAPSHOT
Reporter: Juraj Huska
Assignee: Lukáš Fryč
When I want to use JQuery selectors in my tests, I can not just type:
{code}
jq("input[id$=attributes:handleClassInput]");
{code}
since it will not be properly escaped, and thus will fail to create this JQuery Locator. I
can avoid it by escaping it manually, but it will too much work for my big test suite,
which already worked with RichFaces Selenium properly.
The reason why *it works in RichFaces Selenium is that it uses JQuery v1.4.4 and Ajocado
is using 1.5.*
With 1.4.4 it works fine also in Ajocado.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
6:42 p.m.
[
https://issues.jboss.org/browse/ARQAJO-101?page=com.atlassian.jira.plugin...
]
Juraj Huska updated ARQAJO-101:
-------------------------------
Status: Pull Request Sent (was: Open)
Git Pull Request: https://github.com/arquillian/arquillian-ajocado/pull/25
Using of JQuery 1.5 causes that JQuery selectors are not escaped
properly
-------------------------------------------------------------------------
Key: ARQAJO-101
URL: https://issues.jboss.org/browse/ARQAJO-101
Project: Arquillian Ajocado
Issue Type: Bug
Components: core
Affects Versions: 1.0.0.CR2
Environment: Ajocado 1.0.0-SNAPSHOT
Reporter: Juraj Huska
Assignee: Lukáš Fryč
When I want to use JQuery selectors in my tests, I can not just type:
{code}
jq("input[id$=attributes:handleClassInput]");
{code}
since it will not be properly escaped, and thus will fail to create this JQuery Locator.
I can avoid it by escaping it manually, but it will too much work for my big test suite,
which already worked with RichFaces Selenium properly.
The reason why *it works in RichFaces Selenium is that it uses JQuery v1.4.4 and Ajocado
is using 1.5.*
With 1.4.4 it works fine also in Ajocado.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:36 p.m.
[
https://issues.jboss.org/browse/ARQAJO-101?page=com.atlassian.jira.plugin...
]
Lukáš Fryč commented on ARQAJO-101:
-----------------------------------
Jura, could you please upgrade to latest jQuery (1.7) and try again?
It would be also handy to remove downgrade/upgrade of jQuery from pull request.
Using of JQuery 1.5 causes that JQuery selectors are not escaped
properly
-------------------------------------------------------------------------
Key: ARQAJO-101
URL: https://issues.jboss.org/browse/ARQAJO-101
Project: Arquillian Ajocado
Issue Type: Bug
Components: core
Affects Versions: 1.0.0.CR2
Environment: Ajocado 1.0.0-SNAPSHOT
Reporter: Juraj Huska
Assignee: Lukáš Fryč
When I want to use JQuery selectors in my tests, I can not just type:
{code}
jq("input[id$=attributes:handleClassInput]");
{code}
since it will not be properly escaped, and thus will fail to create this JQuery Locator.
I can avoid it by escaping it manually, but it will too much work for my big test suite,
which already worked with RichFaces Selenium properly.
The reason why *it works in RichFaces Selenium is that it uses JQuery v1.4.4 and Ajocado
is using 1.5.*
With 1.4.4 it works fine also in Ajocado.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:09 p.m.
[
https://issues.jboss.org/browse/ARQAJO-101?page=com.atlassian.jira.plugin...
]
Juraj Huska commented on ARQAJO-101:
------------------------------------
I have not included the downgrade or upgrade of JQuery in pull request as it is noticeable
from commit comments, so sorry for misleading comments.
Using of JQuery 1.5 causes that JQuery selectors are not escaped
properly
-------------------------------------------------------------------------
Key: ARQAJO-101
URL: https://issues.jboss.org/browse/ARQAJO-101
Project: Arquillian Ajocado
Issue Type: Bug
Components: core
Affects Versions: 1.0.0.CR2
Environment: Ajocado 1.0.0-SNAPSHOT
Reporter: Juraj Huska
Assignee: Lukáš Fryč
When I want to use JQuery selectors in my tests, I can not just type:
{code}
jq("input[id$=attributes:handleClassInput]");
{code}
since it will not be properly escaped, and thus will fail to create this JQuery Locator.
I can avoid it by escaping it manually, but it will too much work for my big test suite,
which already worked with RichFaces Selenium properly.
The reason why *it works in RichFaces Selenium is that it uses JQuery v1.4.4 and Ajocado
is using 1.5.*
With 1.4.4 it works fine also in Ajocado.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:11 p.m.
[
https://issues.jboss.org/browse/ARQAJO-101?page=com.atlassian.jira.plugin...
]
Juraj Huska edited comment on ARQAJO-101 at 12/19/11 1:09 PM:
--------------------------------------------------------------
I did not include the downgrade or upgrade of JQuery in pull request as it is noticeable
from commit comments, so sorry for misleading comments.
was (Author: jhuska):
I have not included the downgrade or upgrade of JQuery in pull request as it is
noticeable from commit comments, so sorry for misleading comments.
Using of JQuery 1.5 causes that JQuery selectors are not escaped
properly
-------------------------------------------------------------------------
Key: ARQAJO-101
URL: https://issues.jboss.org/browse/ARQAJO-101
Project: Arquillian Ajocado
Issue Type: Bug
Components: core
Affects Versions: 1.0.0.CR2
Environment: Ajocado 1.0.0-SNAPSHOT
Reporter: Juraj Huska
Assignee: Lukáš Fryč
When I want to use JQuery selectors in my tests, I can not just type:
{code}
jq("input[id$=attributes:handleClassInput]");
{code}
since it will not be properly escaped, and thus will fail to create this JQuery Locator.
I can avoid it by escaping it manually, but it will too much work for my big test suite,
which already worked with RichFaces Selenium properly.
The reason why *it works in RichFaces Selenium is that it uses JQuery v1.4.4 and Ajocado
is using 1.5.*
With 1.4.4 it works fine also in Ajocado.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:15 p.m.
[
https://issues.jboss.org/browse/ARQAJO-101?page=com.atlassian.jira.plugin...
]
Juraj Huska edited comment on ARQAJO-101 at 12/19/11 1:13 PM:
--------------------------------------------------------------
I did not include the downgrade or upgrade of JQuery in pull request as it is noticeable
from commit comments, so sorry for misleading comments and so the pull request contains
only tests for this issue.
was (Author: jhuska):
I did not include the downgrade or upgrade of JQuery in pull request as it is
noticeable from commit comments, so sorry for misleading comments.
Using of JQuery 1.5 causes that JQuery selectors are not escaped
properly
-------------------------------------------------------------------------
Key: ARQAJO-101
URL: https://issues.jboss.org/browse/ARQAJO-101
Project: Arquillian Ajocado
Issue Type: Bug
Components: core
Affects Versions: 1.0.0.CR2
Environment: Ajocado 1.0.0-SNAPSHOT
Reporter: Juraj Huska
Assignee: Lukáš Fryč
When I want to use JQuery selectors in my tests, I can not just type:
{code}
jq("input[id$=attributes:handleClassInput]");
{code}
since it will not be properly escaped, and thus will fail to create this JQuery Locator.
I can avoid it by escaping it manually, but it will too much work for my big test suite,
which already worked with RichFaces Selenium properly.
The reason why *it works in RichFaces Selenium is that it uses JQuery v1.4.4 and Ajocado
is using 1.5.*
With 1.4.4 it works fine also in Ajocado.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:39 p.m.
[
https://issues.jboss.org/browse/ARQAJO-101?page=com.atlassian.jira.plugin...
]
Juraj Huska commented on ARQAJO-101:
------------------------------------
I have upgraded *JQuery to 1.7.1* and it *did not help*.
I tried also all releases prior to 1.7.1 and they are not working either.
The *last* release of JQuery where it works is the 1.4.4.
Using of JQuery 1.5 causes that JQuery selectors are not escaped
properly
-------------------------------------------------------------------------
Key: ARQAJO-101
URL: https://issues.jboss.org/browse/ARQAJO-101
Project: Arquillian Ajocado
Issue Type: Bug
Components: core
Affects Versions: 1.0.0.CR2
Environment: Ajocado 1.0.0-SNAPSHOT
Reporter: Juraj Huska
Assignee: Lukáš Fryč
When I want to use JQuery selectors in my tests, I can not just type:
{code}
jq("input[id$=attributes:handleClassInput]");
{code}
since it will not be properly escaped, and thus will fail to create this JQuery Locator.
I can avoid it by escaping it manually, but it will too much work for my big test suite,
which already worked with RichFaces Selenium properly.
The reason why *it works in RichFaces Selenium is that it uses JQuery v1.4.4 and Ajocado
is using 1.5.*
With 1.4.4 it works fine also in Ajocado.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:45 p.m.
[
https://issues.jboss.org/browse/ARQAJO-101?page=com.atlassian.jira.plugin...
]
Juraj Huska commented on ARQAJO-101:
------------------------------------
I can not find any mention about stop supporting of this escape feature in release notes
for release 1.5, where it stop to work firstly.
In the main screen with Jquery Selectors there is also note:
If you wish to use any of the meta-characters ( such as
!"#$%&'()*+,./:;<=>?@[\]^`{|}~ ) as a literal part of a name, you must
escape the character with two backslashes: \\. For example, if you have an element with
id="foo.bar", you can use the selector $("#foo\\.bar").
Using of JQuery 1.5 causes that JQuery selectors are not escaped
properly
-------------------------------------------------------------------------
Key: ARQAJO-101
URL: https://issues.jboss.org/browse/ARQAJO-101
Project: Arquillian Ajocado
Issue Type: Bug
Components: core
Affects Versions: 1.0.0.CR2
Environment: Ajocado 1.0.0-SNAPSHOT
Reporter: Juraj Huska
Assignee: Lukáš Fryč
When I want to use JQuery selectors in my tests, I can not just type:
{code}
jq("input[id$=attributes:handleClassInput]");
{code}
since it will not be properly escaped, and thus will fail to create this JQuery Locator.
I can avoid it by escaping it manually, but it will too much work for my big test suite,
which already worked with RichFaces Selenium properly.
The reason why *it works in RichFaces Selenium is that it uses JQuery v1.4.4 and Ajocado
is using 1.5.*
With 1.4.4 it works fine also in Ajocado.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:51 p.m.
[
https://issues.jboss.org/browse/ARQAJO-101?page=com.atlassian.jira.plugin...
]
Lukáš Fryč edited comment on ARQAJO-101 at 12/19/11 1:49 PM:
-------------------------------------------------------------
Jura, I know the escaping of these characters is not very convenient way, but it avoids a
clash with selector features.
Particularly colon ({{:}}) could clash with all modifiers like {{:has}}, {{:is}},
{{:visible}}, etc.
was (Author: lfryc):
Jura, I know the escaping of these characters is not very convenient way, but it
avoids a clash with selector features.
Particularly colon ({{:}}) could clash with all modifies like {{:has}}, {{:is}},
{{:visible}}, etc.
Using of JQuery 1.5 causes that JQuery selectors are not escaped
properly
-------------------------------------------------------------------------
Key: ARQAJO-101
URL: https://issues.jboss.org/browse/ARQAJO-101
Project: Arquillian Ajocado
Issue Type: Bug
Components: core
Affects Versions: 1.0.0.CR2
Environment: Ajocado 1.0.0-SNAPSHOT
Reporter: Juraj Huska
Assignee: Lukáš Fryč
When I want to use JQuery selectors in my tests, I can not just type:
{code}
jq("input[id$=attributes:handleClassInput]");
{code}
since it will not be properly escaped, and thus will fail to create this JQuery Locator.
I can avoid it by escaping it manually, but it will too much work for my big test suite,
which already worked with RichFaces Selenium properly.
The reason why *it works in RichFaces Selenium is that it uses JQuery v1.4.4 and Ajocado
is using 1.5.*
With 1.4.4 it works fine also in Ajocado.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:51 p.m.
[
https://issues.jboss.org/browse/ARQAJO-101?page=com.atlassian.jira.plugin...
]
Lukáš Fryč commented on ARQAJO-101:
-----------------------------------
Jura, I know the escaping of these characters is not very convenient way, but it avoids a
clash with selector features.
Particularly colon ({{:}}) could clash with all modifies like {{:has}}, {{:is}},
{{:visible}}, etc.
Using of JQuery 1.5 causes that JQuery selectors are not escaped
properly
-------------------------------------------------------------------------
Key: ARQAJO-101
URL: https://issues.jboss.org/browse/ARQAJO-101
Project: Arquillian Ajocado
Issue Type: Bug
Components: core
Affects Versions: 1.0.0.CR2
Environment: Ajocado 1.0.0-SNAPSHOT
Reporter: Juraj Huska
Assignee: Lukáš Fryč
When I want to use JQuery selectors in my tests, I can not just type:
{code}
jq("input[id$=attributes:handleClassInput]");
{code}
since it will not be properly escaped, and thus will fail to create this JQuery Locator.
I can avoid it by escaping it manually, but it will too much work for my big test suite,
which already worked with RichFaces Selenium properly.
The reason why *it works in RichFaces Selenium is that it uses JQuery v1.4.4 and Ajocado
is using 1.5.*
With 1.4.4 it works fine also in Ajocado.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
8:39 p.m.
[
https://issues.jboss.org/browse/ARQAJO-101?page=com.atlassian.jira.plugin...
]
Juraj Huska commented on ARQAJO-101:
------------------------------------
Yes, I see.
The problem is that Metamer test suite counts with this feature.
For me the question is whether the JQuery will be downgraded in Ajocado, or I will have to
alter the Metamer test suite, and than maybe to introduce the escaping level in metamer
layer?
Thanks
Using of JQuery 1.5 causes that JQuery selectors are not escaped
properly
-------------------------------------------------------------------------
Key: ARQAJO-101
URL: https://issues.jboss.org/browse/ARQAJO-101
Project: Arquillian Ajocado
Issue Type: Bug
Components: core
Affects Versions: 1.0.0.CR2
Environment: Ajocado 1.0.0-SNAPSHOT
Reporter: Juraj Huska
Assignee: Lukáš Fryč
When I want to use JQuery selectors in my tests, I can not just type:
{code}
jq("input[id$=attributes:handleClassInput]");
{code}
since it will not be properly escaped, and thus will fail to create this JQuery Locator.
I can avoid it by escaping it manually, but it will too much work for my big test suite,
which already worked with RichFaces Selenium properly.
The reason why *it works in RichFaces Selenium is that it uses JQuery v1.4.4 and Ajocado
is using 1.5.*
With 1.4.4 it works fine also in Ajocado.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
9:55 p.m.
[
https://issues.jboss.org/browse/ARQAJO-101?page=com.atlassian.jira.plugin...
]
Lukáš Fryč commented on ARQAJO-101:
-----------------------------------
Juraj, we could introduce auto-escaping feature which would be configurable.
My concerns is about this feature is complexity of escaping these characters.
If you will allow global configuration for this feature, you may lose ability to define
certain jQuery/CSS selectors.
What could help you in Metamer test suite is own factory method for JQueryLocator which
would do escaping, e.g. {{jqNoEsc}}.
Using of JQuery 1.5 causes that JQuery selectors are not escaped
properly
-------------------------------------------------------------------------
Key: ARQAJO-101
URL: https://issues.jboss.org/browse/ARQAJO-101
Project: Arquillian Ajocado
Issue Type: Bug
Components: core
Affects Versions: 1.0.0.CR2
Environment: Ajocado 1.0.0-SNAPSHOT
Reporter: Juraj Huska
Assignee: Lukáš Fryč
When I want to use JQuery selectors in my tests, I can not just type:
{code}
jq("input[id$=attributes:handleClassInput]");
{code}
since it will not be properly escaped, and thus will fail to create this JQuery Locator.
I can avoid it by escaping it manually, but it will too much work for my big test suite,
which already worked with RichFaces Selenium properly.
The reason why *it works in RichFaces Selenium is that it uses JQuery v1.4.4 and Ajocado
is using 1.5.*
With 1.4.4 it works fine also in Ajocado.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
12:59 a.m.
[
https://issues.jboss.org/browse/ARQAJO-101?page=com.atlassian.jira.plugin...
]
Lukáš Fryč updated ARQAJO-101:
------------------------------
Fix Version/s: 1.1-Tracking
Git Pull Request: https://github.com/arquillian/arquillian-ajocado/pull/25 (was:
https://github.com/arquillian/arquillian-ajocado/pull/25)
Using of JQuery 1.5 causes that JQuery selectors are not escaped
properly
-------------------------------------------------------------------------
Key: ARQAJO-101
URL: https://issues.jboss.org/browse/ARQAJO-101
Project: Arquillian Ajocado
Issue Type: Bug
Components: core
Affects Versions: 1.0.0.CR2
Environment: Ajocado 1.0.0-SNAPSHOT
Reporter: Juraj Huska
Fix For: 1.1-Tracking
When I want to use JQuery selectors in my tests, I can not just type:
{code}
jq("input[id$=attributes:handleClassInput]");
{code}
since it will not be properly escaped, and thus will fail to create this JQuery Locator.
I can avoid it by escaping it manually, but it will too much work for my big test suite,
which already worked with RichFaces Selenium properly.
The reason why *it works in RichFaces Selenium is that it uses JQuery v1.4.4 and Ajocado
is using 1.5.*
With 1.4.4 it works fine also in Ajocado.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:21 p.m.
New subject: [JBoss JIRA] (ARQGRA-6) Using of JQuery 1.5 causes that JQuery selectors are not escaped properly
[
https://issues.jboss.org/browse/ARQGRA-6?page=com.atlassian.jira.plugin.s...
]
Lukáš Fryč commented on ARQGRA-6:
---------------------------------
Thanks for the pull request, Juraj!
It has been merged into develop.
Using of JQuery 1.5 causes that JQuery selectors are not escaped
properly
-------------------------------------------------------------------------
Key: ARQGRA-6
URL: https://issues.jboss.org/browse/ARQGRA-6
Project: Arquillian Graphene
Issue Type: Bug
Components: core
Affects Versions: 1.0.0.CR2
Environment: Ajocado 1.0.0-SNAPSHOT
Reporter: Juraj Huska
Fix For: 2.0.0.Alpha2
When I want to use JQuery selectors in my tests, I can not just type:
{code}
jq("input[id$=attributes:handleClassInput]");
{code}
since it will not be properly escaped, and thus will fail to create this JQuery Locator.
I can avoid it by escaping it manually, but it will too much work for my big test suite,
which already worked with RichFaces Selenium properly.
The reason why *it works in RichFaces Selenium is that it uses JQuery v1.4.4 and Ajocado
is using 1.5.*
With 1.4.4 it works fine also in Ajocado.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
2:21 p.m.
New subject: [JBoss JIRA] (ARQGRA-6) Using of JQuery 1.5 causes that JQuery selectors are not escaped properly
[
https://issues.jboss.org/browse/ARQGRA-6?page=com.atlassian.jira.plugin.s...
]
Lukáš Fryč updated ARQGRA-6:
----------------------------
Status: Resolved (was: Pull Request Sent)
Assignee: Lukáš Fryč
Fix Version/s: 2.0.0.Alpha2
(was: 1.1-Tracking)
Resolution: Done
Using of JQuery 1.5 causes that JQuery selectors are not escaped
properly
-------------------------------------------------------------------------
Key: ARQGRA-6
URL: https://issues.jboss.org/browse/ARQGRA-6
Project: Arquillian Graphene
Issue Type: Bug
Components: core
Affects Versions: 1.0.0.CR2
Environment: Ajocado 1.0.0-SNAPSHOT
Reporter: Juraj Huska
Assignee: Lukáš Fryč
Fix For: 2.0.0.Alpha2
When I want to use JQuery selectors in my tests, I can not just type:
{code}
jq("input[id$=attributes:handleClassInput]");
{code}
since it will not be properly escaped, and thus will fail to create this JQuery Locator.
I can avoid it by escaping it manually, but it will too much work for my big test suite,
which already worked with RichFaces Selenium properly.
The reason why *it works in RichFaces Selenium is that it uses JQuery v1.4.4 and Ajocado
is using 1.5.*
With 1.4.4 it works fine also in Ajocado.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators:
https://issues.jboss.org/secure/ContactAdministrators!default.jspa
For more information on JIRA, see: http://www.atlassian.com/software/jira
4372
days inactive
4537
days old
arquillian-issues@lists.jboss.org
14 comments
8 participants
participants (8)
-
Juraj Huska (Commented) (JIRA) -
Juraj Huska (Created) (JIRA)
-
Juraj Huska (Issue Comment Edited) (JIRA)
-
Juraj Huska (Updated) (JIRA)
-
Lukáš Fryč (Commented) (JIRA)
-
Lukáš Fryč (Issue Comment Edited) (JIRA)
-
Lukáš Fryč (JIRA)
-
Lukáš Fryč (Updated) (JIRA)