6:35 a.m.
Author: pete.muir(a)jboss.org
Date: 2008-05-12 07:35:45 -0400 (Mon, 12 May 2008)
New Revision: 8162
Modified:
branches/Seam_2_0/doc/Seam_Reference_Guide/en-US/I18n.xml
trunk/doc/Seam_Reference_Guide/en-US/I18n.xml
Log:
Corrections for i8n chapter and port to trunk
Modified: branches/Seam_2_0/doc/Seam_Reference_Guide/en-US/I18n.xml
===================================================================
--- branches/Seam_2_0/doc/Seam_Reference_Guide/en-US/I18n.xml 2008-05-12 10:34:47 UTC (rev
8161)
+++ branches/Seam_2_0/doc/Seam_Reference_Guide/en-US/I18n.xml 2008-05-12 11:35:45 UTC (rev
8162)
@@ -2,106 +2,127 @@
<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
<chapter id="i18n">
- <title>Internationalization, localization and themes</title>
+ <title>Internationalization, localization and themes</title>
- <para>Seam makes it easy to build internationalized applications. First,
- let's walk through all the stages needed to internationalize and localize
- your app. Then we'll take a look at the components Seam bundles.</para>
+ <para>
+ Seam makes it easy to build internationalized applications. First, let's
+ walk through all the stages needed to internationalize and localize your
+ app. Then we'll take a look at the components Seam bundles.
+ </para>
- <section>
- <title>Internationalizing your app</title>
+ <section>
+ <title>Internationalizing your app</title>
- <para>JEE application is consisting from many components and all can break
- the whole view on the localizated target.</para>
+ <para>
+ A JEE application consists of many components and all of them must be
+ configured properly for your application to be localized.
+ </para>
- <para>Starting at the bottom, the first step is to ensure that your
- database server and client is using the correct character encoding for
- your locale. Normally you'll want to use UTF-8. How to do this is outside
- the scope of this tutorial.</para>
+ <para>
+ Starting at the bottom, the first step is to ensure that your database
+ server and client is using the correct character encoding for your
+ locale. Normally you'll want to use UTF-8. How to do this is outside
+ the scope of this tutorial.
+ </para>
- <section>
- <title>Application server configuration</title>
+ <section>
+ <title>Application server configuration</title>
- <para>To ensure that application server receive correct parameters
- attributes from client requests you have to adapt the configuration of
- tomcat connector. If you use Tomcat or JBOSS AS, add attribute
- <code>URIEncoding="UTF-8"</code> into connector
configuration. In case
- JBOSS AS 4.2.2 change
-
<code>${JBOSS_HOME}/server/(default)/deploy/jboss-web.deployer/server.xml</code>
- configuration file like the following:</para>
+ <para>
+ To ensure that the application server receives the request
+ parameters in the correct encoding from client requests you have to
+ configure the tomcat connector. If you use Tomcat or JBoss AS, add
+ the <literal>URIEncoding="UTF-8"</literal> attribute to
the
+ connector configuration. For JBoss AS 4.2 change
+
<literal>${JBOSS_HOME}/server/(default)/deploy/jboss-web.deployer/server.xml</literal>:
+ </para>
- <programlisting><Connector port="8080"
URIEncoding="UTF-8"/></programlisting>
+ <programlisting role="XML"><Connector
port="8080" URIEncoding="UTF-8"/></programlisting>
- <para>There is also another configuration atribute
- <code>useBodyEncodingForURI</code>, which is logically better for use,
- because it says that encoding for URI will be taken from setting of web
- page body. In other words the encoding of the parameters in URL will be
- same as the content of the web page. Example of configuration is the
- following:</para>
+ <para>
+ There is alternative which is probably better. You can tell JBoss AS
+ that the encoding for the request parameters will be taken from the
+ request:
+ </para>
- <programlisting><Connector port="8080"
useBodyEncodingForURI="true"/></programlisting>
- </section>
+ <programlisting role="XML"><Connector
port="8080"
useBodyEncodingForURI="true"/></programlisting>
+ </section>
- <section>
- <title>Translated application strings</title>
+ <section>
+ <title>Translated application strings</title>
- <para>Correct localized application uses for all static texts in JSF
- pages labels, which can be translated and loaded from resource bundles
- with defined labels. First you need to ensure that your resource bundle
- is encoded using the desired character encoding. By default it uses
- ISO-8859-1. Although ISO-8859-1 supports many languages, it doesn't
- represent everything. So if you want to translate in another langugage,
- which uses characters outside the standard ASCII set, you need to use
- encoding which covers all these non-ascii characters.</para>
+ <para>
+ You'll also need localized strings for all the
<emphasis>messages</emphasis>
+ in your application (for example field labels on your views). First
+ you need to ensure that your resource bundle is encoded using the
+ desired character encoding. By default ASCII is used. Although ASCII
+ is enough for many languages, it doesn't provide characters for all
+ languages.
+ </para>
- <para>You'll need to understand another caveat regarding property
- bundles; you must create them in ASCII, or use Unicode escape codes to
- represent Unicode characters. Since you don't compile a property file to
- byte codes, there is no way to tell the JVM which character set to use.
- So you must explicitly use ASCII characters or use the escape sequences.
- You can represent a Unicode character in any Java file using \uXXXX,
- where XXXX is the hexidecimal representation of the character. Write
- your translation of labels (see below section <link
- linkend="labels">Labels</link>) to file and then you have to
convert the
- content of file into escaped format through the java command tool
- native2ascii provided in the JDK. This tool will convert a file written
- in your native encoding to one that represents non-ASCII characters as
- Unicode escape sequences.</para>
+ <para>
+ Resource bundles must be created in ASCII, or use Unicode escape
+ codes to represent Unicode characters. Since you don't compile a
+ property file to byte code, there is no way to tell the JVM which
+ character set to use. So you must use either ASCII characters or
+ escape characters not in the ASCII character set.
+ You can represent a Unicode character in any Java file using \uXXXX,
+ where XXXX is the hexidecimal representation of the character.
+ </para>
+
+ <para>
+ You can write your translation of labels
+ (<xlink linkend="labels">Labels</xlink>) to your
messages resource
+ bundle in the native encoding and then convert the content of the
+ file into the escaped format through the tool
<literal>native2ascii</literal>
+ provided in the JDK. This tool will convert a file written in your
+ native encoding to one that represents non-ASCII characters as
+ Unicode escape sequences.
+ </para>
- <para>Usage of this tool is described at <ulink
-
url="http://java.sun.com/j2se/1.5.0/docs/tooldocs/index.html#intl&qu...
- for Java 5 or at <ulink
-
url="http://java.sun.com/javase/6/docs/technotes/tools/#intl"&g...
- for Java 6, but briefly, on command line
write:<programlisting><code><prompt>$ native2ascii -encoding UTF-8
messages_cs.properties >
messages_cs_escaped.properties</prompt></code></programlisting>Then
- converted file can be used in application as resource bundle with a
- proper locale code (see <link
linkend="labels">Labels</link>).</para>
- </section>
+ <para>
+ Usage of this tool is described
+ <ulink
url="http://java.sun.com/j2se/1.5.0/docs/tooldocs/index.html#intl&qu... for
Java 5</ulink>
+ or
+ <ulink
url="http://java.sun.com/javase/6/docs/technotes/tools/#intl"&g... for Java
6</ulink>.
+ For example, to convert a file from UTF-8:
+ </para>
+
+ <programlisting><prompt>$ native2ascii -encoding UTF-8
messages_cs.properties >
messages_cs_escaped.properties</prompt></programlisting>
+
+ </section>
- <section>
- <title>Other encoding settings</title>
+ <section>
+ <title>Other encoding settings</title>
- <para>We need to make sure that the view (JSF, JSP or XHTML) displays
- your correct localized data and messages using the correct character set
- and also any data submitted uses the correct encoding.</para>
+ <para>
+ We need to make sure that the view displays your localized data and
+ messages using the correct character set and also any data submitted
+ uses the correct encoding.
+ </para>
- <para>To set the display character encoding, you need to use the
- <literal><f:view locale="cs_CZ"/></literal> tag
for example to use
- Czech locale in Java Server Faces technology. You may want to change the
- encoding of the xml document itself if you want to embed localized
- strings in the xml. To do this alter the encoding attribute in xml
- declaration <literal><?xml version="1.0"
- encoding="UTF-8"?></literal> as required.</para>
+ <para>
+ To set the display character encoding, you need to use the
+ <literal><f:view
locale="cs_CZ"/></literal> tag (here we tell
+ JSF to use the Czech locale). You may want to change the encoding of
+ the xml document itself if you want to embed localized strings in the
+ xml. To do this alter the encoding attribute in xml declaration
+ <literal><?xml version="1.0"
encoding="UTF-8"?></literal> as
+ required.
+ </para>
- <para>Also JSF/Facelets should submit any requests in the desired
- character, but to make sure any requests that don't specify an encoding
- you can use a Servlet filter to set it in Seam components.xml
- configuration file:</para>
+ <para>
+ Also JSF/Facelets should submit any requests using the specified
+ character encoding, but to make sure any requests that don't specify
+ an encoding you can force the request encoding using a servlet
+ filter. Configure this in <literal>components.xml</literal>:
+ </para>
- <programlisting role="XML"><web:character-encoding-filter
encoding="UTF-8"
+ <programlisting
role="XML"><![CDATA[<web:character-encoding-filter
encoding="UTF-8"
override-client="true"
- url-pattern="*.seam"/></programlisting>
- </section>
- </section>
+ url-pattern="*.seam" />]]></programlisting>
+ </section>
+ </section>
<section>
<title>Locales<anchor id="locales" /></title>
Modified: trunk/doc/Seam_Reference_Guide/en-US/I18n.xml
===================================================================
--- trunk/doc/Seam_Reference_Guide/en-US/I18n.xml 2008-05-12 10:34:47 UTC (rev 8161)
+++ trunk/doc/Seam_Reference_Guide/en-US/I18n.xml 2008-05-12 11:35:45 UTC (rev 8162)
@@ -1,201 +1,287 @@
<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
-
+<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+"http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
<chapter id="i18n">
- <title>Internationalization and themes</title>
- <para>
- Seam makes it easy to build internationalized applications by
- providing several built-in components for handling multi-language
- UI messages.
- </para>
-
- <section>
- <title>Locales</title>
- <para>
- Each user login session has an associated instance of
- <literal>java.util.Locale</literal> (available to the
- application as a component named
- <literal>locale</literal>). Under normal circumstances,
- you won't need to do any special configuration to set
- the locale. Seam just delegates to JSF to determine
- the active locale:
- </para>
-
- <itemizedlist>
- <listitem>
- <para>If there is a locale associated with the HTTP request
- (the browser locale), and that locale is in the list
- of supported locales from
<literal>faces-config.xml</literal>,
- use that locale for the rest of the session.</para>
- </listitem>
- <listitem>
- <para>Otherwise, if a default locale was specified in the
- <literal>faces-config.xml</literal>, use that locale
- for the rest of the session.</para>
- </listitem>
- <listitem>
- <para>Otherwise, use the default locale of the
server.</para>
- </listitem>
- </itemizedlist>
-
- <para>
- It is <emphasis>possible</emphasis> to set the locale
- manually via the Seam configuration properties
-
<literal>org.jboss.seam.international.localeSelector.language</literal>,
-
<literal>org.jboss.seam.international.localeSelector.country</literal> and
-
<literal>org.jboss.seam.international.localeSelector.variant</literal>, but
- we can't think of any good reason to ever do this.
- </para>
-
- <para>
- It is, however, useful to allow the user to set the
- locale manually via the application user interface.
- Seam provides built-in functionality for overriding
- the locale determined by the algorithm above. All
- you have to do is add the following fragment to a
- form in your JSP or Facelets page:
- </para>
-
-<programlisting role="XHTML"><![CDATA[<h:selectOneMenu
value="#{localeSelector.language}">
- <f:selectItem itemLabel="English" itemValue="en"/>
- <f:selectItem itemLabel="Deutsch" itemValue="de"/>
- <f:selectItem itemLabel="Francais" itemValue="fr"/>
-</h:selectOneMenu>
-<h:commandButton action="#{localeSelector.select}"
value="#{messages['ChangeLanguage']}"/>]]></programlisting>
+ <title>Internationalization, localization and themes</title>
- <para>
- Or, if you want a list of all supported locales from
- <literal>faces-config.xml</literal>, just use:
- </para>
+ <para>
+ Seam makes it easy to build internationalized applications. First, let's
+ walk through all the stages needed to internationalize and localize your
+ app. Then we'll take a look at the components Seam bundles.
+ </para>
- <programlisting role="XHTML"><![CDATA[<h:selectOneMenu
value="#{localeSelector.localeString}">
- <f:selectItems value="#{localeSelector.supportedLocales}"/>
-</h:selectOneMenu>
-<h:commandButton action="#{localeSelector.select}"
value="#{messages['ChangeLanguage']}"/>]]></programlisting>
+ <section>
+ <title>Internationalizing your app</title>
- <para>
- When this use selects an item from the drop-down, and
- clicks the button, the Seam and JSF locales will be
- overridden for the rest of the session.
- </para>
-
- </section>
-
+ <para>
+ A JEE application consists of many components and all of them must be
+ configured properly for your application to be localized.
+ </para>
+
+ <para>
+ Starting at the bottom, the first step is to ensure that your database
+ server and client is using the correct character encoding for your
+ locale. Normally you'll want to use UTF-8. How to do this is outside
+ the scope of this tutorial.
+ </para>
+
+ <section>
+ <title>Application server configuration</title>
+
+ <para>
+ To ensure that the application server receives the request
+ parameters in the correct encoding from client requests you have to
+ configure the tomcat connector. If you use Tomcat or JBoss AS, add
+ the <literal>URIEncoding="UTF-8"</literal> attribute to
the
+ connector configuration. For JBoss AS 4.2 change
+
<literal>${JBOSS_HOME}/server/(default)/deploy/jboss-web.deployer/server.xml</literal>:
+ </para>
+
+ <programlisting role="XML"><Connector
port="8080" URIEncoding="UTF-8"/></programlisting>
+
+ <para>
+ There is alternative which is probably better. You can tell JBoss AS
+ that the encoding for the request parameters will be taken from the
+ request:
+ </para>
+
+ <programlisting role="XML"><Connector
port="8080"
useBodyEncodingForURI="true"/></programlisting>
+ </section>
+
+ <section>
+ <title>Translated application strings</title>
+
+ <para>
+ You'll also need localized strings for all the
<emphasis>messages</emphasis>
+ in your application (for example field labels on your views). First
+ you need to ensure that your resource bundle is encoded using the
+ desired character encoding. By default ASCII is used. Although ASCII
+ is enough for many languages, it doesn't provide characters for all
+ languages.
+ </para>
+
+ <para>
+ Resource bundles must be created in ASCII, or use Unicode escape
+ codes to represent Unicode characters. Since you don't compile a
+ property file to byte code, there is no way to tell the JVM which
+ character set to use. So you must use either ASCII characters or
+ escape characters not in the ASCII character set.
+ You can represent a Unicode character in any Java file using \uXXXX,
+ where XXXX is the hexidecimal representation of the character.
+ </para>
+
+ <para>
+ You can write your translation of labels
+ (<xlink linkend="labels">Labels</xlink>) to your
messages resource
+ bundle in the native encoding and then convert the content of the
+ file into the escaped format through the tool
<literal>native2ascii</literal>
+ provided in the JDK. This tool will convert a file written in your
+ native encoding to one that represents non-ASCII characters as
+ Unicode escape sequences.
+ </para>
+
+ <para>
+ Usage of this tool is described
+ <ulink
url="http://java.sun.com/j2se/1.5.0/docs/tooldocs/index.html#intl&qu... for
Java 5</ulink>
+ or
+ <ulink
url="http://java.sun.com/javase/6/docs/technotes/tools/#intl"&g... for Java
6</ulink>.
+ For example, to convert a file from UTF-8:
+ </para>
+
+ <programlisting><prompt>$ native2ascii -encoding UTF-8
messages_cs.properties >
messages_cs_escaped.properties</prompt></programlisting>
+
+ </section>
+
+ <section>
+ <title>Other encoding settings</title>
+
+ <para>
+ We need to make sure that the view displays your localized data and
+ messages using the correct character set and also any data submitted
+ uses the correct encoding.
+ </para>
+
+ <para>
+ To set the display character encoding, you need to use the
+ <literal><f:view
locale="cs_CZ"/></literal> tag (here we tell
+ JSF to use the Czech locale). You may want to change the encoding of
+ the xml document itself if you want to embed localized strings in the
+ xml. To do this alter the encoding attribute in xml declaration
+ <literal><?xml version="1.0"
encoding="UTF-8"?></literal> as
+ required.
+ </para>
+
+ <para>
+ Also JSF/Facelets should submit any requests using the specified
+ character encoding, but to make sure any requests that don't specify
+ an encoding you can force the request encoding using a servlet
+ filter. Configure this in <literal>components.xml</literal>:
+ </para>
+
+ <programlisting
role="XML"><![CDATA[<web:character-encoding-filter
encoding="UTF-8"
+ override-client="true"
+ url-pattern="*.seam" />]]></programlisting>
+ </section>
+ </section>
+
+ <section>
+ <title>Locales<anchor id="locales" /></title>
+
+ <para>Each user login session has an associated instance of
+ <literal>java.util.Locale</literal> (available to the application as a
+ component named <literal>locale</literal>). Under normal circumstances,
+ you won't need to do any special configuration to set the locale. Seam
+ just delegates to JSF to determine the active locale:</para>
+
+ <itemizedlist>
+ <listitem>
+ <para>If there is a locale associated with the HTTP request (the
+ browser locale), and that locale is in the list of supported locales
+ from <literal>faces-config.xml</literal>, use that locale for the
rest
+ of the session.</para>
+ </listitem>
+
+ <listitem>
+ <para>Otherwise, if a default locale was specified in the
+ <literal>faces-config.xml</literal>, use that locale for the rest of
+ the session.</para>
+ </listitem>
+
+ <listitem>
+ <para>Otherwise, use the default locale of the server.</para>
+ </listitem>
+ </itemizedlist>
+
+ <para>It is <emphasis>possible</emphasis> to set the locale
manually via
+ the Seam configuration properties <literal>
+ org.jboss.seam.international.localeSelector.language</literal>,
<literal>
+ org.jboss.seam.international.localeSelector.country</literal> and
+ <literal> org.jboss.seam.international.localeSelector.variant</literal>,
+ but we can't think of any good reason to ever do this.</para>
+
+ <para>It is, however, useful to allow the user to set the locale manually
+ via the application user interface. Seam provides built-in functionality
+ for overriding the locale determined by the algorithm above. All you have
+ to do is add the following fragment to a form in your JSP or Facelets
+ page:</para>
+
+ <programlisting role="XHTML"><h:selectOneMenu
value="#{localeSelector.language}">
+ <f:selectItem itemLabel="English" itemValue="en"/>
+ <f:selectItem itemLabel="Deutsch" itemValue="de"/>
+ <f:selectItem itemLabel="Francais"
itemValue="fr"/>
+</h:selectOneMenu>
+<h:commandButton action="#{localeSelector.select}"
value="#{messages['ChangeLanguage']}"/></programlisting>
+
+ <para>Or, if you want a list of all supported locales from <literal>
+ faces-config.xml</literal>, just use:</para>
+
+ <programlisting role="XHTML"><h:selectOneMenu
value="#{localeSelector.localeString}">
+ <f:selectItems value="#{localeSelector.supportedLocales}"/>
+</h:selectOneMenu>
+<h:commandButton action="#{localeSelector.select}"
value="#{messages['ChangeLanguage']}"/></programlisting>
+
+ <para>When this use selects an item from the drop-down, and clicks the
+ button, the Seam and JSF locales will be overridden for the rest of the
+ session.</para>
+ </section>
+
+ <section>
+ <title>Labels<anchor id="labels" /></title>
+
+ <para>JSF supports internationalization of user interface labels and
+ descriptive text via the use of <literal><f:loadBundle
/></literal>.
+ You can use this approach in Seam applications. Alternatively, you can
+ take advantage of the Seam <literal> messages</literal> component to
+ display templated labels with embedded EL expressions.</para>
+
<section>
- <title>Labels</title>
- <para>
- JSF supports internationalization of user interface labels and
- descriptive text via the use of <literal><f:loadBundle
/></literal>.
- You can use this approach in Seam applications. Alternatively, you can
- take advantage of the Seam <literal>messages</literal> component
to
- display templated labels with embedded EL expressions.
- </para>
-
- <section>
- <title>Defining labels</title>
- <para>
- Seam provides a <literal>java.util.ResourceBundle</literal>
(available
- to the application as a
<literal>org.jboss.seam.core.resourceBundle</literal>).
- You'll need to make your internationalized labels available via this
special
- resource bundle. By default, the resource bundle used by Seam is named
- <literal>messages</literal> and so you'll need to define your
labels
- in files named <literal>messages.properties</literal>,
- <literal>messages_en.properties</literal>,
- <literal>messages_en_AU.properties</literal>, etc. These
- files usually belong in the <literal>WEB-INF/classes</literal>
- directory.
- </para>
-
- <para>
- So, in <literal>messages_en.properties</literal>:
- </para>
-
- <programlisting><![CDATA[Hello=Hello]]></programlisting>
+ <title>Defining labels</title>
- <para>
- And in <literal>messages_en_AU.properties</literal>:
- </para>
-
- <programlisting><![CDATA[Hello=G'day]]></programlisting>
-
- <para>
- You can select a different name for the resource bundle by setting
- the Seam configuration property named
-
<literal>org.jboss.seam.core.resourceLoader.bundleNames</literal>. You can
even specify
- a list of resource bundle names to be searched (depth first) for
- messages.
- </para>
+ <para>Seam provides a
<literal>java.util.ResourceBundle</literal>
+ (available to the application as a <literal>
+ org.jboss.seam.core.resourceBundle</literal>). You'll need to make your
+ internationalized labels available via this special resource bundle. By
+ default, the resource bundle used by Seam is named
+ <literal>messages</literal> and so you'll need to define your
labels in
+ files named <literal> messages.properties</literal>, <literal>
+ messages_en.properties</literal>, <literal>
+ messages_en_AU.properties</literal>, etc. These files usually belong in
+ the <literal>WEB-INF/classes</literal> directory.</para>
- <programlisting
role="XML"><![CDATA[<core:resource-loader>
- <core:bundle-names>
- <value>mycompany_messages</value>
- <value>standard_messages</value>
- </core:bundle-names>
-</core:resource-loader>]]></programlisting>
+ <para>So, in
<literal>messages_en.properties</literal>:</para>
- <para>
- If you want to define a message just for a particular page, you
- can specify it in a resource bundle with the same name as the
- JSF view id, with the leading <literal>/</literal> and trailing
- file extension removed. So we could put our message in
- <literal>welcome/hello_en.properties</literal> if we only needed
- to display the message on <literal>/welcome/hello.jsp</literal>.
- </para>
-
- <para>
- You can even specify an explicit bundle name in
<literal>pages.xml</literal>:
- </para>
-
- <programlisting role="XML"><![CDATA[<page
view-id="/welcome/hello.jsp"
bundle="HelloMessages"/>]]></programlisting>
-
- <para>
- Then we could use messages defined in
<literal>HelloMessages.properties</literal>
- on <literal>/welcome/hello.jsp</literal>.
- </para>
+ <programlisting>Hello=Hello</programlisting>
+
+ <para>And in
<literal>messages_en_AU.properties</literal>:</para>
+
+ <programlisting>Hello=G'day</programlisting>
+
+ <para>You can select a different name for the resource bundle by setting
+ the Seam configuration property named <literal>
+ org.jboss.seam.core.resourceLoader.bundleNames</literal>. You can even
+ specify a list of resource bundle names to be searched (depth first) for
+ messages.</para>
+
+ <programlisting role="XML"><core:resource-loader>
+ <core:bundle-names>
+ <value>mycompany_messages</value>
+ <value>standard_messages</value>
+ </core:bundle-names>
+</core:resource-loader></programlisting>
+
+ <para>If you want to define a message just for a particular page, you
+ can specify it in a resource bundle with the same name as the JSF view
+ id, with the leading <literal>/</literal> and trailing file extension
+ removed. So we could put our message in <literal>
+ welcome/hello_en.properties</literal> if we only needed to display the
+ message on <literal> /welcome/hello.jsp</literal>.</para>
+
+ <para>You can even specify an explicit bundle name in <literal>
+ pages.xml</literal>:</para>
+
+ <programlisting role="XML"><page
view-id="/welcome/hello.jsp"
bundle="HelloMessages"/></programlisting>
+
+ <para>Then we could use messages defined in <literal>
+ HelloMessages.properties</literal> on <literal>
+ /welcome/hello.jsp</literal>.</para>
</section>
-
+
<section>
- <title>Displaying labels</title>
+ <title>Displaying labels</title>
- <para>
- If you define your labels using the Seam resource bundle, you'll
- be able to use them without having to type
<literal><f:loadBundle ... /></literal>
- on every page. Instead, you can simply type:
- </para>
-
- <programlisting role="XHTML"><![CDATA[<h:outputText
value="#{messages['Hello']}"/>]]></programlisting>
-
- <para>
- or:
- </para>
-
- <programlisting role="XHTML"><![CDATA[<h:outputText
value="#{messages.Hello}"/>]]></programlisting>
-
- <para>
- Even better, the messages themselves may contain EL expressions:
- </para>
+ <para>If you define your labels using the Seam resource bundle, you'll
+ be able to use them without having to type <literal> <f:loadBundle
+ ... /></literal> on every page. Instead, you can simply
type:</para>
- <programlisting><![CDATA[Hello=Hello, #{user.firstName}
#{user.lastName}]]></programlisting>
- <programlisting><![CDATA[Hello=G'day,
#{user.firstName}]]></programlisting>
-
- <para>
- You can even use the messages in your code:
- </para>
+ <programlisting role="XHTML"><h:outputText
value="#{messages['Hello']}"/></programlisting>
- <programlisting role="JAVA"><![CDATA[@In private
Map<String, String> messages;]]></programlisting>
- <programlisting
role="JAVA"><![CDATA[@In("#{messages['Hello']}") private
String helloMessage;]]></programlisting>
+ <para>or:</para>
+ <programlisting role="XHTML"><h:outputText
value="#{messages.Hello}"/></programlisting>
+
+ <para>Even better, the messages themselves may contain EL
+ expressions:</para>
+
+ <programlisting>Hello=Hello, #{user.firstName}
#{user.lastName}</programlisting>
+
+ <programlisting>Hello=G'day, #{user.firstName}</programlisting>
+
+ <para>You can even use the messages in your code:</para>
+
+ <programlisting role="JAVA">@In private Map<String,
String> messages;</programlisting>
+
+ <programlisting
role="JAVA">@In("#{messages['Hello']}") private String
helloMessage;</programlisting>
</section>
-
+
<section>
- <title>Faces messages</title>
- <para>
- The <literal>facesMessages</literal> component is a
super-convenient
- way to display success or failure messages to the user. The functionality
- we just described also works for faces messages:
- </para>
+ <title>Faces messages</title>
- <programlisting role="JAVA"><![CDATA[@Name("hello")
+ <para>The <literal>facesMessages</literal> component is a
+ super-convenient way to display success or failure messages to the user.
+ The functionality we just described also works for faces
+ messages:</para>
+
+ <programlisting role="JAVA">@Name("hello")
@Stateless
public class HelloBean implements Hello {
@In FacesMessages facesMessages;
@@ -203,126 +289,110 @@
public String sayIt() {
facesMessages.addFromResourceBundle("Hello");
}
-}]]></programlisting>
+}</programlisting>
- <para>
- This will display <literal>Hello, Gavin King</literal> or
<literal>G'day, Gavin</literal>,
- depending upon the user's locale.
- </para>
-
+ <para>This will display <literal>Hello, Gavin King</literal> or
+ <literal>G'day, Gavin</literal>, depending upon the user's
+ locale.</para>
</section>
- </section>
-
- <section>
- <title>Timezones</title>
- <para>
- There is also a session-scoped instance of
<literal>java.util.Timezone</literal>,
- named <literal>org.jboss.seam.international.timezone</literal>,
and a Seam component for changing
- the timezone named
<literal>org.jboss.seam.international.timezoneSelector</literal>. By default,
- the timezone is the default timezone of the server. Unfortunately, the JSF
specification
- says that all dates and times should be assumed to be UTC, and displayed as
UTC, unless
- a timezone is explicitly specified using
<literal><f:convertDateTime></literal>.
- This is an extremely inconvenient default behavior.
- </para>
- <para>
- Seam overrides this behavior, and defaults all dates and times to the Seam
timezone.
- In addition, Seam provides the
<literal><s:convertDateTime></literal> tag which
- always performs conversions in the Seam timezone.
- </para>
- </section>
-
- <section>
- <title>Themes</title>
- <para>
- Seam applications are also very easily skinnable. The theme API is very
- similar to the localization API, but of course these two concerns are
- orthogonal, and some applications support both localization and themes.
- </para>
-
- <para>
- First, configure the set of supported themes:
- </para>
-
- <programlisting role="XML"><![CDATA[<theme:theme-selector
cookie-enabled="true">
- <theme:available-themes>
- <value>default</value>
- <value>accessible</value>
- <value>printable</value>
- </theme:available-themes>
-</theme:theme-selector>]]></programlisting>
-
- <para>
- Note that the first theme listed is the default theme.
- </para>
+ </section>
- <para>
- Themes are defined in a properties file with the same name as the theme.
- For example, the <literal>default</literal> theme is defined as a
set of
- entries in <literal>default.properties</literal>. For example,
- <literal>default.properties</literal> might define:
- </para>
-
-<programlisting><![CDATA[css ../screen.css
-template /template.xhtml]]></programlisting>
+ <section>
+ <title>Timezones</title>
- <para>
- Usually the entries in a theme resource bundle will be paths to CSS styles
- or images and names of facelets templates (unlike localization resource
- bundles which are usually text).
- </para>
-
- <para>
- Now we can use these entries in our JSP or facelets pages. For example,
- to theme the stylesheet in a facelets page:
- </para>
-
- <programlisting role="XHTML"><![CDATA[<link
href="#{theme.css}" rel="stylesheet" type="text/css"
/>]]></programlisting>
-
- <para>Or, when the page definition resides in a subdirectory:</para>
-
- <programlisting role="XHTML"><![CDATA[<link
href="#{facesContext.externalContext.requestContextPath}#{theme.css}"
- rel="stylesheet" type="text/css"
/>]]></programlisting>
-
- <para>
- Most powerfully, facelets lets us theme the template used by a
<literal><ui:composition></literal>:
- </para>
+ <para>There is also a session-scoped instance of <literal>
+ java.util.Timezone</literal>, named <literal>
+ org.jboss.seam.international.timezone</literal>, and a Seam component for
+ changing the timezone named <literal>
+ org.jboss.seam.international.timezoneSelector</literal>. By default, the
+ timezone is the default timezone of the server. Unfortunately, the JSF
+ specification says that all dates and times should be assumed to be UTC,
+ and displayed as UTC, unless a timezone is explicitly specified using
+ <literal> <f:convertDateTime></literal>. This is an
extremely
+ inconvenient default behavior.</para>
- <programlisting role="XHTML"><![CDATA[<ui:composition
xmlns="http://www.w3.org/1999/xhtml"
+ <para>Seam overrides this behavior, and defaults all dates and times to
+ the Seam timezone. In addition, Seam provides the <literal>
+ <s:convertDateTime></literal> tag which always performs
conversions
+ in the Seam timezone.</para>
+ </section>
+
+ <section>
+ <title>Themes</title>
+
+ <para>Seam applications are also very easily skinnable. The theme API is
+ very similar to the localization API, but of course these two concerns are
+ orthogonal, and some applications support both localization and
+ themes.</para>
+
+ <para>First, configure the set of supported themes:</para>
+
+ <programlisting role="XML"><theme:theme-selector
cookie-enabled="true">
+ <theme:available-themes>
+ <value>default</value>
+ <value>accessible</value>
+ <value>printable</value>
+ </theme:available-themes>
+</theme:theme-selector></programlisting>
+
+ <para>Note that the first theme listed is the default theme.</para>
+
+ <para>Themes are defined in a properties file with the same name as the
+ theme. For example, the <literal>default</literal> theme is defined as a
+ set of entries in <literal> default.properties</literal>. For example,
+ <literal> default.properties</literal> might define:</para>
+
+ <programlisting>css ../screen.css
+template /template.xhtml</programlisting>
+
+ <para>Usually the entries in a theme resource bundle will be paths to CSS
+ styles or images and names of facelets templates (unlike localization
+ resource bundles which are usually text).</para>
+
+ <para>Now we can use these entries in our JSP or facelets pages. For
+ example, to theme the stylesheet in a facelets page:</para>
+
+ <programlisting role="XHTML"><link
href="#{theme.css}" rel="stylesheet" type="text/css"
/></programlisting>
+
+ <para>Or, when the page definition resides in a subdirectory:</para>
+
+ <programlisting role="XHTML"><link
href="#{facesContext.externalContext.requestContextPath}#{theme.css}"
+ rel="stylesheet" type="text/css"
/></programlisting>
+
+ <para>Most powerfully, facelets lets us theme the template used by a
+ <literal><ui:composition></literal>:</para>
+
+ <programlisting role="XHTML"><ui:composition
xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
- template="#{theme.template}">]]></programlisting>
-
- <para>
- Just like the locale selector, there is a built-in theme selector to allow
- the user to freely switch themes:
- </para>
+ template="#{theme.template}"></programlisting>
- <programlisting role="XHTML"><![CDATA[<h:selectOneMenu
value="#{themeSelector.theme}">
- <f:selectItems value="#{themeSelector.themes}"/>
-</h:selectOneMenu>
-<h:commandButton action="#{themeSelector.select}" value="Select
Theme"/>]]></programlisting>
+ <para>Just like the locale selector, there is a built-in theme selector to
+ allow the user to freely switch themes:</para>
- </section>
-
- <section>
- <title>Persisting locale and theme preferences via cookies</title>
- <para>
- The locale selector, theme selector and timezone selector all support
- persistence of locale and theme preference to a cookie. Simply set the
- <literal>cookie-enabled</literal> property in
<literal>components.xml</literal>:
- </para>
-
- <programlisting role="XML"><![CDATA[<theme:theme-selector
cookie-enabled="true">
- <theme:available-themes>
- <value>default</value>
- <value>accessible</value>
- <value>printable</value>
- </theme:available-themes>
-</theme:theme-selector>
+ <programlisting role="XHTML"><h:selectOneMenu
value="#{themeSelector.theme}">
+ <f:selectItems value="#{themeSelector.themes}"/>
+</h:selectOneMenu>
+<h:commandButton action="#{themeSelector.select}" value="Select
Theme"/></programlisting>
+ </section>
-<international:locale-selector
cookie-enabled="true"/>]]></programlisting>
+ <section>
+ <title>Persisting locale and theme preferences via cookies</title>
- </section>
-
-</chapter>
+ <para>The locale selector, theme selector and timezone selector all
+ support persistence of locale and theme preference to a cookie. Simply set
+ the <literal>cookie-enabled</literal> property in
+ <literal>components.xml</literal>:</para>
+
+ <programlisting role="XML"><theme:theme-selector
cookie-enabled="true">
+ <theme:available-themes>
+ <value>default</value>
+ <value>accessible</value>
+ <value>printable</value>
+ </theme:available-themes>
+</theme:theme-selector>
+
+<international:locale-selector
cookie-enabled="true"/></programlisting>
+ </section>
+</chapter>
\ No newline at end of file