I think you probably want to modify the classpath and also add -Djboss.modules.system.pkgs=org.aspectj (or whatever package aspectj classes are under). This system property is a comma separated list of non-modular packages that JBoss modules will just pass straight through to the system class loader. Stuart On Sat, Oct 21, 2017 at 1:29 AM, Eric B <ebenzacar(a)gmail.com&gt; wrote: > I'm trying to use AspectJ to advise some core classes in > Wildfly/undertow. Specifically, I'm trying to advise some of the Undertow > HttpSession methods to get some more detailed logging when Sessions are > created/expire/etc. > > I've added AspectJ as a -javaagent which is launched on startup of > Wildfly. I had to follow some of the steps listed at: > https://github.com/ChienChingLee/How-to-launch-Wildfly- > 9.0-with-AspectJ-1.8-LTW. But it works; I can see that the AJ weaver is > loaded and present. > > My problem now is that I don't know where to put my jar of aspects for it > to be loaded/visible by the weaver for all modules. I've managed to get it > to work by modifying the io.undertow.servlet module, adding my jar in the > folder and modifying the module.xml, but that only advises the > io.undertow.servlet.* classes. And it seems like quite an ugly hack to get > to that. > > I tried creating an independent module for it, and declaring it as a > global module in my standalone.xml, but that didn't seem to work. Nor did > modifying the servlet module.xml and specifying my module as a dependency. > > I tried to add it to the startup parameters in the standalone.conf file, > specifying it as -classpath path/to/myaspect.jar, but that only advised the > startup WF (org.jboss) classes and none of the modules. > > At the moment, I'm looking to advise any implementation of > javax.servlet.http.HttpSession.invalidate(). In AJ language, the > pointcut is simple: execution(* javax.servlet.http.HttpSession+.invalidate(..)) > will match any implementation of the HttpSession interface. However, to > make it active, I need to get that Aspect in the classpath of every module > loaded and visible to the AJ weaver. > > Is there a "generic" place I can declare the the aspects.jar so that it > is part of the classpath of every module loaded or is my only choice to > modify every module.xml in the system? > > Thanks, > > Eric > > > _______________________________________________ > wildfly-dev mailing list > wildfly-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/wildfly-dev >

On Tue, Oct 24, 2017 at 2:04 AM, Eric B <ebenzacar(a)gmail.com&gt; wrote: > Thanks for the tips, but i'm still struggling with this. Here's what > I've done so far. > > I've added the module name under -Djboss.modules.system.pkgs and added it > as a cp argument as : > This is not a module name, but a package name. You should not be creating a aspectj modules. Stuart > > -Djboss.modules.system.pkgs=org.jboss.byteman,org.aspectj, > org.jboss.logmanager > -classpath "D:\jboss-eap-7.0\modules\system\layers\base\org\aspectj\ > main\aspectj-0.0.1-SNAPSHOT.jar" > > My org.aspectj module is defined as: > > <module xmlns="urn:jboss:module:1.3" name="org.aspectj"> > <resources> > <resource-root path="aspectjweaver-1.8.10.jar"/> > <resource-root path="aspectj-0.0.1-SNAPSHOT.jar"/> > </resources> > </module> > > > > Now when I start Wildfly, I still don't see it trying to weave any of the > base Wildfly/undertow modules. If I define the org.aspectj as a global > module in the standalone.xml, the I see the weaver attempting to weave my > application deployment but none of the base WF classes. > > Does the jboss.modules.system.pkgs argument relate to the module name or > to the package naming of the libraries? ie: do my aspects in > aspectj-0.0.1-SNAPSHOT.jar also have to be in an 'org.aspectj' java > package or am I free to use any package naming structure I want as long as > they are part of the org.aspectj WF module definition? My aspect is > actually in a test package called "aspectj". I even tried added "aspectj" > to the jboss.modules.system.pkgs variable, but to no avail. > > How does WF know where to find classes/packages defined in > 'jboss.modules.system.pkgs'? > > Thanks, > > Eric > > > > > On Sun, Oct 22, 2017 at 7:09 PM, Stuart Douglas < > stuart.w.douglas(a)gmail.com&gt; wrote: > >> I think you probably want to modify the classpath and also >> add -Djboss.modules.system.pkgs=org.aspectj (or whatever package >> aspectj classes are under). This system property is a comma separated list >> of non-modular packages that JBoss modules will just pass straight through >> to the system class loader. >> >> Stuart >> >> On Sat, Oct 21, 2017 at 1:29 AM, Eric B <ebenzacar(a)gmail.com&gt; wrote: >> >>> I'm trying to use AspectJ to advise some core classes in >>> Wildfly/undertow. Specifically, I'm trying to advise some of the Undertow >>> HttpSession methods to get some more detailed logging when Sessions are >>> created/expire/etc. >>> >>> I've added AspectJ as a -javaagent which is launched on startup of >>> Wildfly. I had to follow some of the steps listed at: >>> https://github.com/ChienChingLee/How-to-launch-Wildfly-9 >>> .0-with-AspectJ-1.8-LTW. But it works; I can see that the AJ weaver >>> is loaded and present. >>> >>> My problem now is that I don't know where to put my jar of aspects for >>> it to be loaded/visible by the weaver for all modules. I've managed to get >>> it to work by modifying the io.undertow.servlet module, adding my jar in >>> the folder and modifying the module.xml, but that only advises the >>> io.undertow.servlet.* classes. And it seems like quite an ugly hack to get >>> to that. >>> >>> I tried creating an independent module for it, and declaring it as a >>> global module in my standalone.xml, but that didn't seem to work. Nor did >>> modifying the servlet module.xml and specifying my module as a dependency. >>> >>> I tried to add it to the startup parameters in the standalone.conf >>> file, specifying it as -classpath path/to/myaspect.jar, but that only >>> advised the startup WF (org.jboss) classes and none of the modules. >>> >>> At the moment, I'm looking to advise any implementation of >>> javax.servlet.http.HttpSession.invalidate(). In AJ language, the >>> pointcut is simple: execution(* javax.servlet.http.HttpSession+.invalidate(..)) >>> will match any implementation of the HttpSession interface. However, to >>> make it active, I need to get that Aspect in the classpath of every module >>> loaded and visible to the AJ weaver. >>> >>> Is there a "generic" place I can declare the the aspects.jar so that it >>> is part of the classpath of every module loaded or is my only choice to >>> modify every module.xml in the system? >>> >>> Thanks, >>> >>> Eric >>> >>> >>> _______________________________________________ >>> wildfly-dev mailing list >>> wildfly-dev(a)lists.jboss.org >>> https://lists.jboss.org/mailman/listinfo/wildfly-dev >>> >> >> >

Basically if the package name matches it just delegates to the system class loader, so if it is on the classpath or boot classpath it should be found. Stuart On Tue, Oct 24, 2017 at 8:59 AM, Eric B <ebenzacar(a)gmail.com&gt; wrote: > Where does WF know where to find the corresponding jar that contains that > package name? Does it take it from the jvm startup classpath parameters? > Does it matter if it's -cp or -Xbootclasspath/a? > > Thanks > > Eric > > On Oct 23, 2017 3:07 PM, "Stuart Douglas" <stuart.w.douglas(a)gmail.com&gt; > wrote: > >> >> >> On Tue, Oct 24, 2017 at 2:04 AM, Eric B <ebenzacar(a)gmail.com&gt; wrote: >> >>> Thanks for the tips, but i'm still struggling with this. Here's what >>> I've done so far. >>> >>> I've added the module name under -Djboss.modules.system.pkgs and added >>> it as a cp argument as : >>> >> >> This is not a module name, but a package name. You should not be >> creating a aspectj modules. >> >> Stuart >> >> >>> >>> -Djboss.modules.system.pkgs=org.jboss.byteman,org.aspectj, >>> org.jboss.logmanager >>> -classpath "D:\jboss-eap-7.0\modules\syst >>> em\layers\base\org\aspectj\main\aspectj-0.0.1-SNAPSHOT.jar" >>> >>> My org.aspectj module is defined as: >>> >>> <module xmlns="urn:jboss:module:1.3" name="org.aspectj"> >>> <resources> >>> <resource-root path="aspectjweaver-1.8.10.jar"/> >>> <resource-root path="aspectj-0.0.1-SNAPSHOT.jar"/> >>> </resources> >>> </module> >>> >>> >>> >>> Now when I start Wildfly, I still don't see it trying to weave any of >>> the base Wildfly/undertow modules. If I define the org.aspectj as a >>> global module in the standalone.xml, the I see the weaver attempting to >>> weave my application deployment but none of the base WF classes. >>> >>> Does the jboss.modules.system.pkgs argument relate to the module name >>> or to the package naming of the libraries? ie: do my aspects in >>> aspectj-0.0.1-SNAPSHOT.jar also have to be in an 'org.aspectj' java >>> package or am I free to use any package naming structure I want as long as >>> they are part of the org.aspectj WF module definition? My aspect is >>> actually in a test package called "aspectj". I even tried added "aspectj" >>> to the jboss.modules.system.pkgs variable, but to no avail. >>> >>> How does WF know where to find classes/packages defined in >>> 'jboss.modules.system.pkgs'? >>> >>> Thanks, >>> >>> Eric >>> >>> >>> >>> >>> On Sun, Oct 22, 2017 at 7:09 PM, Stuart Douglas < >>> stuart.w.douglas(a)gmail.com&gt; wrote: >>> >>>> I think you probably want to modify the classpath and also >>>> add -Djboss.modules.system.pkgs=org.aspectj (or whatever package >>>> aspectj classes are under). This system property is a comma separated list >>>> of non-modular packages that JBoss modules will just pass straight through >>>> to the system class loader. >>>> >>>> Stuart >>>> >>>> On Sat, Oct 21, 2017 at 1:29 AM, Eric B <ebenzacar(a)gmail.com&gt; wrote: >>>> >>>>> I'm trying to use AspectJ to advise some core classes in >>>>> Wildfly/undertow. Specifically, I'm trying to advise some of the Undertow >>>>> HttpSession methods to get some more detailed logging when Sessions are >>>>> created/expire/etc. >>>>> >>>>> I've added AspectJ as a -javaagent which is launched on startup of >>>>> Wildfly. I had to follow some of the steps listed at: >>>>> https://github.com/ChienChingLee/How-to-launch-Wildfly-9 >>>>> .0-with-AspectJ-1.8-LTW. But it works; I can see that the AJ weaver >>>>> is loaded and present. >>>>> >>>>> My problem now is that I don't know where to put my jar of aspects >>>>> for it to be loaded/visible by the weaver for all modules. I've managed to >>>>> get it to work by modifying the io.undertow.servlet module, adding my jar >>>>> in the folder and modifying the module.xml, but that only advises the >>>>> io.undertow.servlet.* classes. And it seems like quite an ugly hack to get >>>>> to that. >>>>> >>>>> I tried creating an independent module for it, and declaring it as a >>>>> global module in my standalone.xml, but that didn't seem to work. Nor did >>>>> modifying the servlet module.xml and specifying my module as a dependency. >>>>> >>>>> I tried to add it to the startup parameters in the standalone.conf >>>>> file, specifying it as -classpath path/to/myaspect.jar, but that only >>>>> advised the startup WF (org.jboss) classes and none of the modules. >>>>> >>>>> At the moment, I'm looking to advise any implementation of >>>>> javax.servlet.http.HttpSession.invalidate(). In AJ language, the >>>>> pointcut is simple: execution(* javax.servlet.http.HttpSession+.invalidate(..)) >>>>> will match any implementation of the HttpSession interface. However, to >>>>> make it active, I need to get that Aspect in the classpath of every module >>>>> loaded and visible to the AJ weaver. >>>>> >>>>> Is there a "generic" place I can declare the the aspects.jar so that >>>>> it is part of the classpath of every module loaded or is my only choice to >>>>> modify every module.xml in the system? >>>>> >>>>> Thanks, >>>>> >>>>> Eric >>>>> >>>>> >>>>> _______________________________________________ >>>>> wildfly-dev mailing list >>>>> wildfly-dev(a)lists.jboss.org >>>>> https://lists.jboss.org/mailman/listinfo/wildfly-dev >>>>> >>>> >>>> >>> >>