11:43 a.m.
Thomas Fromm created ISPN-2495:
----------------------------------
Summary: Replication on startup not reliable
Key: ISPN-2495
URL: https://issues.jboss.org/browse/ISPN-2495
Project: Infinispan
Issue Type: Bug
Components: State transfer
Affects Versions: 5.2.0.Beta3
Reporter: Thomas Fromm
Assignee: Mircea Markus
Priority: Blocker
Attachments: 2ND.log
Situation: REPL cache with Cache Loader and ~500k entries and preload = true
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:43 a.m.
[
https://issues.jboss.org/browse/ISPN-2495?page=com.atlassian.jira.plugin....
]
Thomas Fromm updated ISPN-2495:
-------------------------------
Attachment: 2ND.log
Replication on startup not reliable
-----------------------------------
Key: ISPN-2495
URL: https://issues.jboss.org/browse/ISPN-2495
Project: Infinispan
Issue Type: Bug
Components: State transfer
Affects Versions: 5.2.0.Beta3
Reporter: Thomas Fromm
Assignee: Mircea Markus
Priority: Blocker
Attachments: 2ND.log
Situation: REPL cache with Cache Loader and ~500k entries and preload = true
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:45 a.m.
[
https://issues.jboss.org/browse/ISPN-2495?page=com.atlassian.jira.plugin....
]
Thomas Fromm updated ISPN-2495:
-------------------------------
Description:
Situation: REPL cache with Cache Loader and ~500k entries and preload = true
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
Maybe startup of all other nodes should be blocked until warm start of first node has
finished?
was:
Situation: REPL cache with Cache Loader and ~500k entries and preload = true
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
Replication on startup not reliable
-----------------------------------
Key: ISPN-2495
URL: https://issues.jboss.org/browse/ISPN-2495
Project: Infinispan
Issue Type: Bug
Components: State transfer
Affects Versions: 5.2.0.Beta3
Reporter: Thomas Fromm
Assignee: Mircea Markus
Priority: Blocker
Attachments: 2ND.log
Situation: REPL cache with Cache Loader and ~500k entries and preload = true
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
Maybe startup of all other nodes should be blocked until warm start of first node has
finished?
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
1:48 p.m.
[
https://issues.jboss.org/browse/ISPN-2495?page=com.atlassian.jira.plugin....
]
Thomas Fromm updated ISPN-2495:
-------------------------------
Description:
Situation: REPL cache with Cache Loader and ~500k entries and preload = true, and shared
cache store.
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
Maybe startup of all other nodes should be blocked until warm start of first node has
finished?
was:
Situation: REPL cache with Cache Loader and ~500k entries and preload = true
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
Maybe startup of all other nodes should be blocked until warm start of first node has
finished?
Replication on startup not reliable
-----------------------------------
Key: ISPN-2495
URL: https://issues.jboss.org/browse/ISPN-2495
Project: Infinispan
Issue Type: Bug
Components: State transfer
Affects Versions: 5.2.0.Beta3
Reporter: Thomas Fromm
Assignee: Mircea Markus
Priority: Blocker
Attachments: 2ND.log
Situation: REPL cache with Cache Loader and ~500k entries and preload = true, and shared
cache store.
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
Maybe startup of all other nodes should be blocked until warm start of first node has
finished?
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
11:31 a.m.
[
https://issues.jboss.org/browse/ISPN-2495?page=com.atlassian.jira.plugin....
]
Thomas Fromm updated ISPN-2495:
-------------------------------
Status: Pull Request Sent (was: Open)
Git Pull Request: https://github.com/infinispan/infinispan/pull/1463
Replication on startup not reliable
-----------------------------------
Key: ISPN-2495
URL: https://issues.jboss.org/browse/ISPN-2495
Project: Infinispan
Issue Type: Bug
Components: State transfer
Affects Versions: 5.2.0.Beta3
Reporter: Thomas Fromm
Assignee: Mircea Markus
Priority: Blocker
Attachments: 2ND.log
Situation: REPL cache with Cache Loader and ~500k entries and preload = true, and shared
cache store.
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
Maybe startup of all other nodes should be blocked until warm start of first node has
finished?
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
5:25 p.m.
[
https://issues.jboss.org/browse/ISPN-2495?page=com.atlassian.jira.plugin....
]
Dan Berindei reassigned ISPN-2495:
----------------------------------
Assignee: Dan Berindei (was: Mircea Markus)
Replication on startup not reliable
-----------------------------------
Key: ISPN-2495
URL: https://issues.jboss.org/browse/ISPN-2495
Project: Infinispan
Issue Type: Bug
Components: State transfer
Affects Versions: 5.2.0.Beta3
Reporter: Thomas Fromm
Assignee: Dan Berindei
Priority: Blocker
Attachments: 2ND.log
Situation: REPL cache with Cache Loader and ~500k entries and preload = true, and shared
cache store.
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
Maybe startup of all other nodes should be blocked until warm start of first node has
finished?
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
10:05 p.m.
[
https://issues.jboss.org/browse/ISPN-2495?page=com.atlassian.jira.plugin....
]
Dan Berindei updated ISPN-2495:
-------------------------------
Attachment: 2495.patch
Attached test.
Replication on startup not reliable
-----------------------------------
Key: ISPN-2495
URL: https://issues.jboss.org/browse/ISPN-2495
Project: Infinispan
Issue Type: Bug
Components: State transfer
Affects Versions: 5.2.0.Beta3
Reporter: Thomas Fromm
Assignee: Dan Berindei
Priority: Blocker
Attachments: 2495.patch, 2ND.log
Situation: REPL cache with Cache Loader and ~500k entries and preload = true, and shared
cache store.
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
Maybe startup of all other nodes should be blocked until warm start of first node has
finished?
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
4:09 p.m.
[
https://issues.jboss.org/browse/ISPN-2495?page=com.atlassian.jira.plugin....
]
Mircea Markus updated ISPN-2495:
--------------------------------
Fix Version/s: 5.2.0.CR1
Replication on startup not reliable
-----------------------------------
Key: ISPN-2495
URL: https://issues.jboss.org/browse/ISPN-2495
Project: Infinispan
Issue Type: Bug
Components: State transfer
Affects Versions: 5.2.0.Beta3
Reporter: Thomas Fromm
Assignee: Dan Berindei
Priority: Blocker
Fix For: 5.2.0.CR1
Attachments: 2495.patch, 2ND.log
Situation: REPL cache with Cache Loader and ~500k entries and preload = true, and shared
cache store.
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
Maybe startup of all other nodes should be blocked until warm start of first node has
finished?
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
7:15 p.m.
[
https://issues.jboss.org/browse/ISPN-2495?page=com.atlassian.jira.plugin....
]
Thomas Fromm updated ISPN-2495:
-------------------------------
Status: Open (was: Pull Request Sent)
Replication on startup not reliable
-----------------------------------
Key: ISPN-2495
URL: https://issues.jboss.org/browse/ISPN-2495
Project: Infinispan
Issue Type: Bug
Components: State transfer
Affects Versions: 5.2.0.Beta3
Reporter: Thomas Fromm
Assignee: Dan Berindei
Priority: Blocker
Fix For: 5.2.0.CR1
Attachments: 2495.patch, 2ND.log
Situation: REPL cache with Cache Loader and ~500k entries and preload = true, and shared
cache store.
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
Maybe startup of all other nodes should be blocked until warm start of first node has
finished?
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
9:20 a.m.
[
https://issues.jboss.org/browse/ISPN-2495?page=com.atlassian.jira.plugin....
]
Dan Berindei updated ISPN-2495:
-------------------------------
Status: Pull Request Sent (was: Open)
Git Pull Request: https://github.com/infinispan/infinispan/pull/1488 (was:
https://github.com/infinispan/infinispan/pull/1463)
Replication on startup not reliable
-----------------------------------
Key: ISPN-2495
URL: https://issues.jboss.org/browse/ISPN-2495
Project: Infinispan
Issue Type: Bug
Components: State transfer
Affects Versions: 5.2.0.Beta3
Reporter: Thomas Fromm
Assignee: Dan Berindei
Priority: Blocker
Fix For: 5.2.0.CR1
Attachments: 2495.patch, 2ND.log
Situation: REPL cache with Cache Loader and ~500k entries and preload = true, and shared
cache store.
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
Maybe startup of all other nodes should be blocked until warm start of first node has
finished?
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:01 p.m.
[
https://issues.jboss.org/browse/ISPN-2495?page=com.atlassian.jira.plugin....
]
Adrian Nistor updated ISPN-2495:
--------------------------------
Status: Resolved (was: Pull Request Sent)
Resolution: Done
Integrated. Thanks!
Replication on startup not reliable
-----------------------------------
Key: ISPN-2495
URL: https://issues.jboss.org/browse/ISPN-2495
Project: Infinispan
Issue Type: Bug
Components: State transfer
Affects Versions: 5.2.0.Beta3
Reporter: Thomas Fromm
Assignee: Dan Berindei
Priority: Blocker
Fix For: 5.2.0.CR1
Attachments: 2495.patch, 2ND.log
Situation: REPL cache with Cache Loader and ~500k entries and preload = true, and shared
cache store.
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
Maybe startup of all other nodes should be blocked until warm start of first node has
finished?
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
3:03 p.m.
[
https://issues.jboss.org/browse/ISPN-2495?page=com.atlassian.jira.plugin....
]
Adrian Nistor updated ISPN-2495:
--------------------------------
Fix Version/s: 5.2.0.Beta6
(was: 5.2.0.CR1)
Replication on startup not reliable
-----------------------------------
Key: ISPN-2495
URL: https://issues.jboss.org/browse/ISPN-2495
Project: Infinispan
Issue Type: Bug
Components: State transfer
Affects Versions: 5.2.0.Beta3
Reporter: Thomas Fromm
Assignee: Dan Berindei
Priority: Blocker
Fix For: 5.2.0.Beta6
Attachments: 2495.patch, 2ND.log
Situation: REPL cache with Cache Loader and ~500k entries and preload = true, and shared
cache store.
Problem: 1st node starts and the startup (until cache loaded all entries and so on) takes
lets say 2min. When starting the 2nd node after e.g. 30s, then state is requested, but
contains no results. cache loader is also not used, since its not the 1st node. Log from
2nd node is attached.
So I've REPL cache over two (or more ) nodes, where only the 1st node contains the
entries.
When starting all other nodes later, then state transfer works and the data gets
replicated.
Maybe startup of all other nodes should be blocked until warm start of first node has
finished?
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
4155
days inactive
4176
days old
infinispan-issues@lists.jboss.org
11 comments
4 participants
participants (4)
-
Adrian Nistor (JIRA) -
Dan Berindei (JIRA)
-
Mircea Markus (JIRA)
-
Thomas Fromm (JIRA)