All, I've got Keycloak 3.4.3 configured to return client roles in a "role" Claim to an OpenID Connect client. (The client has got a list of roles, these are assigned to the user and I've got a User Client Role Token mapper that maps the roles of that client into the "role" claim.) Everything works until I turn "Full Scope Allowed" off. Then all roles disappear and trying to request the roles via the "scope" (with or without client ID prefix) doesn't seem to work. Am I doing something stupid or is there something that does not work as (I) expected? Thanks for your help! Michael This message may contain confidential information. If you are not the intended recipient, do not disseminate, distribute, or copy this e-mail or its attachments. Please notify the sender of the error immediately by e-mail or at the telephone number listed below, and delete this e-mail and any attachments from your system. Receipt by anyone other than the intended recipient(s) is not a waiver of any trade secrets, proprietary interests, or other applicable rights. E-mail transmission is not necessarily secure or error-free, as information could be intercepted, corrupted, lost, destroyed, delayed, incomplete, or may contain viruses. The sender disclaims all liability for any errors or omissions arising as a result of the e-mail transmission. OEConnection LLC, (888) 776-5792, www.oeconnection.com _______________________________________________ keycloak-user mailing list keycloak-user(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/keycloak-user

You said, that I need to "add scopes for the *realm roles* and client roles of *other clients*", but I don't even get the roles for this client anymore, no matter whether "Scope Param Required" is set for the role or not and no matter whether I add the role names to the "scope" or not. Michael From: Marek Posolda [mailto:mposolda@redhat.com] Sent: Tuesday, February 20, 2018 2:13 PM To: Michael Poettgen; keycloak-user(a)lists.jboss.org Subject: Re: [keycloak-user] Roles without "Full Scope Allowed"? Once you changed "Full Scope Allowed" to off, you need to add scopes for the realm roles and client roles of other clients. This can be done in the "Scope" tab, pretty much same place where you turned "Full Scope Allowed" to off. I think we have also some docs around this somewhere (not 100% sure). Marek On 20/02/18 13:07, Michael Poettgen wrote: > All, > > I've got Keycloak 3.4.3 configured to return client roles in a "role" Claim to an OpenID Connect client. (The client has got a list of roles, these are assigned to the user and I've got a User Client Role Token mapper that maps the roles of that client into the "role" claim.) Everything works until I turn "Full Scope Allowed" off. Then all roles disappear and trying to request the roles via the "scope" (with or without client ID prefix) doesn't seem to work. > > Am I doing something stupid or is there something that does not work as (I) expected? > > Thanks for your help! > > Michael > > > This message may contain confidential information. If you are not the intended recipient, do not disseminate, distribute, or copy this e-mail or its attachments. Please notify the sender of the error immediately by e-mail or at the telephone number listed below, and delete this e-mail and any attachments from your system. Receipt by anyone other than the intended recipient(s) is not a waiver of any trade secrets, proprietary interests, or other applicable rights. E-mail transmission is not necessarily secure or error-free, as information could be intercepted, corrupted, lost, destroyed, delayed, incomplete, or may contain viruses. The sender disclaims all liability for any errors or omissions arising as a result of the e-mail transmission. > > OEConnection LLC, (888) 776-5792, www.oeconnection.com > > _______________________________________________ > keycloak-user mailing list > keycloak-user(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/keycloak-user _______________________________________________ keycloak-user mailing list keycloak-user(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/keycloak-user

Betalb, That’s what I thought as well, but if I turn off „Full Scope Allowed“ and look at the „Client Roles“ of my client then all client roles appear under “Effective Roles”. I cannot assign or un-assign any of these roles. So my assumption was that, since these are all roles of my client anyways, that they would always be available (at least for my client). Also the user does have the proper roles (I get them with “Full Scope Allowed” enabled), but nevertheless I don’t get any. Thanks, Michael *From:* Виталий Ищенко [mailto:betalb@gmail.com] *Sent:* Tuesday, February 20, 2018 6:41 PM *To:* Michael Poettgen *Cc:* Marek Posolda; keycloak-user(a)lists.jboss.org *Subject:* Re: [keycloak-user] Roles without "Full Scope Allowed"? This is mentioned in docs: http://www.keycloak.org/docs/latest/server_admin/index.html#_client_scope <https://protect-us.mimecast.com/s/lPgJCOYGm2ULDEGtr7uCs> If full scope is disabled: access token, issued to specific client will have intersection of user own roles with client scope, defined in scope section of client configuration вт, 20 февр. 2018 г. в 16:34, Michael Poettgen < Michael.Poettgen(a)oeconnection.com&gt;: You said, that I need to "add scopes for the *realm roles* and client roles of *other clients*", but I don't even get the roles for this client anymore, no matter whether "Scope Param Required" is set for the role or not and no matter whether I add the role names to the "scope" or not. Michael From: Marek Posolda [mailto:mposolda@redhat.com] Sent: Tuesday, February 20, 2018 2:13 PM To: Michael Poettgen; keycloak-user(a)lists.jboss.org Subject: Re: [keycloak-user] Roles without "Full Scope Allowed"? Once you changed "Full Scope Allowed" to off, you need to add scopes for the realm roles and client roles of other clients. This can be done in the "Scope" tab, pretty much same place where you turned "Full Scope Allowed" to off. I think we have also some docs around this somewhere (not 100% sure). Marek On 20/02/18 13:07, Michael Poettgen wrote: > All, > > I've got Keycloak 3.4.3 configured to return client roles in a "role" Claim to an OpenID Connect client. (The client has got a list of roles, these are assigned to the user and I've got a User Client Role Token mapper that maps the roles of that client into the "role" claim.) Everything works until I turn "Full Scope Allowed" off. Then all roles disappear and trying to request the roles via the "scope" (with or without client ID prefix) doesn't seem to work. > > Am I doing something stupid or is there something that does not work as (I) expected? > > Thanks for your help! > > Michael > > > This message may contain confidential information. If you are not the intended recipient, do not disseminate, distribute, or copy this e-mail or its attachments. Please notify the sender of the error immediately by e-mail or at the telephone number listed below, and delete this e-mail and any attachments from your system. Receipt by anyone other than the intended recipient(s) is not a waiver of any trade secrets, proprietary interests, or other applicable rights. E-mail transmission is not necessarily secure or error-free, as information could be intercepted, corrupted, lost, destroyed, delayed, incomplete, or may contain viruses. The sender disclaims all liability for any errors or omissions arising as a result of the e-mail transmission. > > OEConnection LLC, (888) 776-5792, www.oeconnection.com <https://protect-us.mimecast.com/s/CIajCPNGn9h1BJlf6VFQq> > > _______________________________________________ > keycloak-user mailing list > keycloak-user(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/keycloak-user <https://protect-us.mimecast.com/s/inGTCQWXo2u1nJxfA0ANj> _______________________________________________ keycloak-user mailing list keycloak-user(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/keycloak-user <https://protect-us.mimecast.com/s/inGTCQWXo2u1nJxfA0ANj>

Please create a JIRA if you think that it's a bug. Please add the detailed steps to reproduce. TBH from this email, I don't know what exactly is broken, or if it's just misconfiguration. BTV. Client has always automatically scope to his own roles. And it's not possible to remove them from the scope. It's just possible to add/remove scopes for realm roles or client roles of different clients. So the behaviour described by Michael is expected. Marek On 20/02/18 20:51, Виталий Ищенко wrote: I was able to reproduce this issue It only happens for a claim, produced by the mapper. But I can see correct list of roles in a different claim: resource_access[clientId].roles. It seems like a bug, you can raise it with the team. As a workaround, you can use existing claim On Tue, Feb 20, 2018 at 9:39 PM Michael Poettgen < Michael.Poettgen(a)oeconnection.com&gt; wrote: > Betalb, > > > > That’s what I thought as well, but if I turn off „Full Scope Allowed“ and > look at the „Client Roles“ of my client then all client roles appear under > “Effective Roles”. I cannot assign or un-assign any of these roles. So my > assumption was that, since these are all roles of my client anyways, that > they would always be available (at least for my client). Also the user does > have the proper roles (I get them with “Full Scope Allowed” enabled), but > nevertheless I don’t get any. > > > > Thanks, > > Michael > > > > *From:* Виталий Ищенко [mailto:betalb@gmail.com] > *Sent:* Tuesday, February 20, 2018 6:41 PM > *To:* Michael Poettgen > *Cc:* Marek Posolda; keycloak-user(a)lists.jboss.org > > > *Subject:* Re: [keycloak-user] Roles without "Full Scope Allowed"? > > > > This is mentioned in docs: > http://www.keycloak.org/docs/latest/server_admin/index.html#_client_scope > <https://protect-us.mimecast.com/s/lPgJCOYGm2ULDEGtr7uCs> > > If full scope is disabled: access token, issued to specific client will > have intersection of user own roles with client scope, defined in scope > section of client configuration > > вт, 20 февр. 2018 г. в 16:34, Michael Poettgen < > Michael.Poettgen(a)oeconnection.com&gt;: > > You said, that I need to "add scopes for the *realm roles* and client > roles of *other clients*", but I don't even get the roles for this client > anymore, no matter whether "Scope Param Required" is set for the role or > not and no matter whether I add the role names to the "scope" or not. > > Michael > > From: Marek Posolda [mailto:mposolda@redhat.com] > Sent: Tuesday, February 20, 2018 2:13 PM > To: Michael Poettgen; keycloak-user(a)lists.jboss.org > Subject: Re: [keycloak-user] Roles without "Full Scope Allowed"? > > Once you changed "Full Scope Allowed" to off, you need to add scopes for > the realm roles and client roles of other clients. This can be done in > the "Scope" tab, pretty much same place where you turned "Full Scope > Allowed" to off. I think we have also some docs around this somewhere > (not 100% sure). > > Marek > > On 20/02/18 13:07, Michael Poettgen wrote: > > All, > > > > I've got Keycloak 3.4.3 configured to return client roles in a "role" > Claim to an OpenID Connect client. (The client has got a list of roles, > these are assigned to the user and I've got a User Client Role Token mapper > that maps the roles of that client into the "role" claim.) Everything works > until I turn "Full Scope Allowed" off. Then all roles disappear and trying > to request the roles via the "scope" (with or without client ID prefix) > doesn't seem to work. > > > > Am I doing something stupid or is there something that does not work as > (I) expected? > > > > Thanks for your help! > > > > Michael > > > > > > This message may contain confidential information. If you are not the > intended recipient, do not disseminate, distribute, or copy this e-mail or > its attachments. Please notify the sender of the error immediately by > e-mail or at the telephone number listed below, and delete this e-mail and > any attachments from your system. Receipt by anyone other than the intended > recipient(s) is not a waiver of any trade secrets, proprietary interests, > or other applicable rights. E-mail transmission is not necessarily secure > or error-free, as information could be intercepted, corrupted, lost, > destroyed, delayed, incomplete, or may contain viruses. The sender > disclaims all liability for any errors or omissions arising as a result of > the e-mail transmission. > > > > OEConnection LLC, (888) 776-5792, www.oeconnection.com > <https://protect-us.mimecast.com/s/CIajCPNGn9h1BJlf6VFQq> > > > > _______________________________________________ > > keycloak-user mailing list > > keycloak-user(a)lists.jboss.org > > https://lists.jboss.org/mailman/listinfo/keycloak-user > <https://protect-us.mimecast.com/s/inGTCQWXo2u1nJxfA0ANj> > > _______________________________________________ > keycloak-user mailing list > keycloak-user(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/keycloak-user > <https://protect-us.mimecast.com/s/inGTCQWXo2u1nJxfA0ANj> > >

All, I've got Keycloak 3.4.3 configured to return client roles in a "role" Claim to an OpenID Connect client. (The client has got a list of roles, these are assigned to the user and I've got a User Client Role Token mapper that maps the roles of that client into the "role" claim.) Everything works until I turn "Full Scope Allowed" off. Then all roles disappear and trying to request the roles via the "scope" (with or without client ID prefix) doesn't seem to work. Am I doing something stupid or is there something that does not work as (I) expected? Thanks for your help! Michael This message may contain confidential information. If you are not the intended recipient, do not disseminate, distribute, or copy this e-mail or its attachments. Please notify the sender of the error immediately by e-mail or at the telephone number listed below, and delete this e-mail and any attachments from your system. Receipt by anyone other than the intended recipient(s) is not a waiver of any trade secrets, proprietary interests, or other applicable rights. E-mail transmission is not necessarily secure or error-free, as information could be intercepted, corrupted, lost, destroyed, delayed, incomplete, or may contain viruses. The sender disclaims all liability for any errors or omissions arising as a result of the e-mail transmission. OEConnection LLC, (888) 776-5792<tel:%28888%29%20776-5792>, www.oeconnection.com<https://protect-us.mimecast.com/s/gqRFCJ6142hWjZ4... _______________________________________________ keycloak-user mailing list keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/keycloak-user<https://protect...

Hi Michael Looks, like this issue, is exactly about this case realm_access && resource_access claims are indeed only for access tokens. There is no much sense in adding them to id_token On Thu, Feb 22, 2018 at 5:56 PM Michael Poettgen <Michael.Poettgen(a)oeconnection.com <mailto:Michael.Poettgen@oeconnection.com>> wrote: Vitaliy, Forget the remark on realm_access and resource_access. I found them on the access_token and refresh_token (but not on the id_token, which may be why I couldn’t find them easily on the .NET Core OpenIdConnect authentication provider). I found https://issues.jboss.org/browse/KEYCLOAK-5259 by Luiz Carlos Viana Melo, with a comment by Manfred Duchrow which I found interesting. I left a comment there and voted for the issue instead of raising another one. Regards, Michael *From:*Michael Poettgen *Sent:* Wednesday, February 21, 2018 7:45 PM *To:* 'Виталий Ищенко'; Marek Posolda *Cc:* keycloak-user(a)lists.jboss.org <mailto:keycloak-user@lists.jboss.org> *Subject:* RE: [keycloak-user] Roles without "Full Scope Allowed"? This describes pretty well what I’m getting as well. The only thing I don’t see is the realm_access and resource_access claims. Are they only enabled when activating Authorization? Regards, Michael *From:*ВиталийИщенко[mailto:betalb@gmail.com ] *Sent:* Wednesday, February 21, 2018 6:03 PM *To:* Marek Posolda *Cc:* Michael Poettgen; keycloak-user(a)lists.jboss.org <mailto:keycloak-user@lists.jboss.org> *Subject:* Re: [keycloak-user] Roles without "Full Scope Allowed"? Hi Marek The behaviour for automatically adding client own roles to scope seems fine, the issue is with client mappers (or lack of documentation, hence misunderstanding), their logic is not clear when full scope is not enabled. Also at the bottom, I've mentioned two other quirks that can be observed even with full scope enabled. Suppose we have following setup == Clients == client-with-roles Roles:    * role    * role-composite-child test-client Roles:    * role    * role-composite-child Mappers:    #1  type: User Client Type  client id: client-with-roles  claim: rolesOtherClient    #2  type: User Client Type  client id: test-client  claim: rolesCurrentClient    #3  type: User Realm Role  claim: rolesRealm == REALM Roles ==  * ROLE  * ROLE_COMPOSITE_CHILD  * ROLE_COMPOSITE (contains ROLE_COMPOSITE_CHILD, client-with-roles/role-composite-child, test-client/role-composite-child) == Users == name: "a" mapped roles    * ROLE    * ROLE_COMPOSITE    * test-client/role    * client-with-roles/role Now if I issue token using test-client and user "a" credentials (direct grant), token will have following claims (they have the same set of roles as realm_access and resource_access claims) "rolesRealm": [ "ROLE", "ROLE_COMPOSITE", "ROLE_COMPOSITE_CHILD"   ], "rolesOtherClient": [ "role-composite-child", "role"   ], "rolesCurrentClient": [ "role-composite-child", "role"   ] But if I disable full scope and will add all user "a" roles to scope, token will look like this (realm_access and resource_access haven't changed) "rolesRealm": [ "ROLE", "ROLE_COMPOSITE"   ], "rolesOtherClient": [ "role"   ] rolesCurrentClient claim is absent Also Found few other strange behaviours with mappers  * realm-management roles are not mapped at all  * scoped roles are included into claims, produced by mappers,  even if scope parameter was not provided during token request  (This one may be useful get potential list of roles) On Wed, Feb 21, 2018 at 10:35 AM Marek Posolda <mposolda(a)redhat.com <mailto:mposolda@redhat.com>> wrote: Please create a JIRA if you think that it's a bug. Please add the detailed steps to reproduce. TBH from this email, I don't know what exactly is broken, or if it's just misconfiguration. BTV. Client has always automatically scope to his own roles. And it's not possible to remove them from the scope. It's just possible to add/remove scopes for realm roles or client roles of different clients. So the behaviour described by Michael is expected. Marek On 20/02/18 20:51, Виталий Ищенко wrote: I was able to reproduce this issue It only happens for a claim, produced by the mapper. But I can see correct list of roles in a different claim: resource_access[clientId].roles. It seems like a bug, you can raise it with the team. As a workaround, you can use existing claim On Tue, Feb 20, 2018 at 9:39 PM Michael Poettgen <Michael.Poettgen(a)oeconnection.com <mailto:Michael.Poettgen@oeconnection.com>> wrote: Betalb, That’s what I thought as well, but if I turn off „Full Scope Allowed“ and look at the „Client Roles“ of my client then all client roles appear under “Effective Roles”. I cannot assign or un-assign any of these roles. So my assumption was that, since these are all roles of my client anyways, that they would always be available (at least for my client). Also the user does have the proper roles (I get them with “Full Scope Allowed” enabled), but nevertheless I don’t get any. Thanks, Michael *From:*Виталий Ищенко [mailto:betalb@gmail.com <mailto:betalb@gmail.com>] *Sent:* Tuesday, February 20, 2018 6:41 PM *To:* Michael Poettgen *Cc:* Marek Posolda; keycloak-user(a)lists.jboss.org <mailto:keycloak-user@lists.jboss.org> *Subject:* Re: [keycloak-user] Roles without "Full Scope Allowed"? This is mentioned in docs: http://www.keycloak.org/docs/latest/server_admin/index.html#_client_scope <https://protect-us.mimecast.com/s/7hHDCG6A12hNzkyckuOAm> If full scope is disabled: access token, issued to specific client will have intersection of user own roles with client scope, defined in scope section of client configuration вт, 20 февр. 2018 г. в 16:34, Michael Poettgen <Michael.Poettgen(a)oeconnection.com <mailto:Michael.Poettgen@oeconnection.com>>: You said, that I need to "add scopes for the *realm roles* and client roles of *other clients*", but I don't even get the roles for this client anymore, no matter whether "Scope Param Required" is set for the role or not and no matter whether I add the role names to the "scope" or not. Michael From: Marek Posolda [mailto:mposolda@redhat.com <mailto:mposolda@redhat.com>] Sent: Tuesday, February 20, 2018 2:13 PM To: Michael Poettgen; keycloak-user(a)lists.jboss.org <mailto:keycloak-user@lists.jboss.org> Subject: Re: [keycloak-user] Roles without "Full Scope Allowed"? Once you changed "Full Scope Allowed" to off, you need to add scopes for the realm roles and client roles of other clients. This can be done in the "Scope" tab, pretty much same place where you turned "Full Scope Allowed" to off. I think we have also some docs around this somewhere (not 100% sure). Marek On 20/02/18 13:07, Michael Poettgen wrote: > All, > > I've got Keycloak 3.4.3 configured to return client roles in a "role" Claim to an OpenID Connect client. (The client has got a list of roles, these are assigned to the user and I've got a User Client Role Token mapper that maps the roles of that client into the "role" claim.) Everything works until I turn "Full Scope Allowed" off. Then all roles disappear and trying to request the roles via the "scope" (with or without client ID prefix) doesn't seem to work. > > Am I doing something stupid or is there something that does not work as (I) expected? > > Thanks for your help! > > Michael > > > This message may contain confidential information. If you are not the intended recipient, do not disseminate, distribute, or copy this e-mail or its attachments. Please notify the sender of the error immediately by e-mail or at the telephone number listed below, and delete this e-mail and any attachments from your system. Receipt by anyone other than the intended recipient(s) is not a waiver of any trade secrets, proprietary interests, or other applicable rights. E-mail transmission is not necessarily secure or error-free, as information could be intercepted, corrupted, lost, destroyed, delayed, incomplete, or may contain viruses. The sender disclaims all liability for any errors or omissions arising as a result of the e-mail transmission. > > OEConnection LLC, (888) 776-5792 <tel:%28888%29%20776-5792>, www.oeconnection.com <https://protect-us.mimecast.com/s/gqRFCJ6142hWjZ4iOhU4y> > > _______________________________________________ > keycloak-user mailing list > keycloak-user(a)lists.jboss.org <mailto:keycloak-user@lists.jboss.org> > https://lists.jboss.org/mailman/listinfo/keycloak-user <https://protect-us.mimecast.com/s/t_AiCKrGg2syROAUopQ22> _______________________________________________ keycloak-user mailing list keycloak-user(a)lists.jboss.org <mailto:keycloak-user@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/keycloak-user <https://protect-us.mimecast.com/s/t_AiCKrGg2syROAUopQ22>