Hello Arun, I usethis code w/ Jboss 7 and wildfly 8, i didn't test with wildfly 9/10. MBeanServer mBeanServer = ManagementFactory.getPlatformMBeanServer(); String url = null; try { ObjectName http = new ObjectName("jboss.as: socket-binding-group=standard-sockets,socket-binding=http"); String jbossHttpAddress = (String) mBeanServer.getAttribute(http,"boundAddress"); int jbossHttpPort = (Integer) mBeanServer.getAttribute(http,"boundPort"); url = jbossHttpAddress + ":" + jbossHttpPort; log.fine("Url obtained from the system: " + url); } catch (Exception e) { log.severe(e.getStackTrace().toString()); } return url; regards. On 09/01/2015 02:20 PM, Arun Gupta wrote: Assuming WildFly is bound to all available IP addresses using -b 0.0.0.0, is there a WildFly-specific API that can be used to obtain the IP address where the server is running? Ideally, I'd like something like: WildFly.getHostAddress() WildFly.getHostPort() It could be running in a Docker container, in AWS, on my local laptop, in OpenShift, or any where else and would like the IP address to be returned correctly. Suggestions? Arun _______________________________________________ wildfly-dev mailing list wildfly-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/wildfly-dev

Hello Arun, I usethis code w/ Jboss 7 and wildfly 8, i didn't test with wildfly 9/10. MBeanServer mBeanServer = ManagementFactory.getPlatformMBeanServer(); String url = null; try { ObjectName http = new ObjectName("jboss.as:socket-binding-group=standard-sockets,socket-binding=http"); String jbossHttpAddress = (String) mBeanServer.getAttribute(http,"boundAddress"); int jbossHttpPort = (Integer) mBeanServer.getAttribute(http,"boundPort"); url = jbossHttpAddress + ":" + jbossHttpPort; log.fine("Url obtained from the system: " + url); } catch (Exception e) { log.severe(e.getStackTrace().toString()); } return url; regards. On 09/01/2015 02:20 PM, Arun Gupta wrote: > Assuming WildFly is bound to all available IP addresses using -b > 0.0.0.0, is there a WildFly-specific API that can be used to obtain > the IP address where the server is running? > > Ideally, I'd like something like: > > WildFly.getHostAddress() > WildFly.getHostPort() > > It could be running in a Docker container, in AWS, on my local laptop, > in OpenShift, or any where else and would like the IP address to be > returned correctly. > > Suggestions? > > Arun > _______________________________________________ wildfly-dev mailing list wildfly-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/wildfly-dev

Brian, How do you envision this working in a Docker environment? If multiple WildFly containers are running on the same Docker Host (which is going to be common use case), should each WildFly be bound to the IP address of the host? Possibly invoked with a different port offset? Arun On Tue, Sep 1, 2015 at 1:31 PM, Brian Stansberry <brian.stansberry(a)redhat.com&gt; wrote: > That JMX operation (or the CLI equivalent[1]) will return 0.0.0.0 which > really is the bound address but AIUI isn't what's wanted. > > If the server is configured to use 0.0.0.0, there is no single > "WildFly.getHostAddress()". That setting means the relevant sockets will > be listening on all available interfaces on the machine. Which of those > is the one that's useful to a particular client depends on the network > topology. > > BTW, if you know the names of the nics in your target environment but > don't know the addresses, WildFly (and EAP) let you configure the > interfaces to use a particular nic. If binding to 0.0.0.0 is a > workaround for not knowing the actual addresses, that may help. For example: > > <interface name="public"> > <nic name="eth0"/> > </interface> > > The 'name' attribute also allows expressions: > > <nic name="${my.public.nic:eth0}"/> > > With that kind of config, the JMX query Filippe showed will provide a > regular address. > > [1] The CLI op: > > [standalone@localhost:9990 /] > /socket-binding-group=standard-sockets/socket-binding=http:read-attribute(name=bound-address) > { > "outcome" => "success", > "result" => "0.0.0.0" > } > > On 9/1/15 12:25 PM, Filippe spolti wrote: >> Hello Arun, >> >> I usethis code w/ Jboss 7 and wildfly 8, i didn't test with wildfly 9/10. >> >> MBeanServer mBeanServer = >> ManagementFactory.getPlatformMBeanServer(); >> String url = null; >> try { >> >> ObjectName http = new >> ObjectName("jboss.as:socket-binding-group=standard-sockets,socket-binding=http"); >> String jbossHttpAddress = (String) >> mBeanServer.getAttribute(http,"boundAddress"); >> int jbossHttpPort = (Integer) >> mBeanServer.getAttribute(http,"boundPort"); >> url = jbossHttpAddress + ":" + jbossHttpPort; >> log.fine("Url obtained from the system: " + url); >> } catch (Exception e) { >> log.severe(e.getStackTrace().toString()); >> } >> return url; >> >> regards. >> >> >> On 09/01/2015 02:20 PM, Arun Gupta wrote: >>> Assuming WildFly is bound to all available IP addresses using -b >>> 0.0.0.0, is there a WildFly-specific API that can be used to obtain >>> the IP address where the server is running? >>> >>> Ideally, I'd like something like: >>> >>> WildFly.getHostAddress() >>> WildFly.getHostPort() >>> >>> It could be running in a Docker container, in AWS, on my local laptop, >>> in OpenShift, or any where else and would like the IP address to be >>> returned correctly. >>> >>> Suggestions? >>> >>> Arun >>> >> >> >> >> _______________________________________________ >> wildfly-dev mailing list >> wildfly-dev(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/wildfly-dev >> > > > -- > Brian Stansberry > Senior Principal Software Engineer > JBoss by Red Hat > _______________________________________________ > wildfly-dev mailing list > wildfly-dev(a)lists.jboss.org > https://lists.jboss.org/mailman/listinfo/wildfly-dev

On Tue, Sep 1, 2015 at 3:33 PM, Brian Stansberry <brian.stansberry(a)redhat.com&gt; wrote: > Is this scenario different from running multiple WildFly instances on a > single machine in a non-Docker setup? Good point, they are the same.

> > If not, your choices are to associate each instance with a different > address, or to use port offsets. If there's only one available address then > you're down to port offsets. So, if WildFly runs with -b <IP_ADDRESS> then the utility above will give the correct address and port?

Arun > > > On 9/1/15 4:34 PM, Arun Gupta wrote: >> >> Brian, >> >> How do you envision this working in a Docker environment? >> >> If multiple WildFly containers are running on the same Docker Host >> (which is going to be common use case), should each WildFly be bound >> to the IP address of the host? >> >> Possibly invoked with a different port offset? >> >> Arun >> >> On Tue, Sep 1, 2015 at 1:31 PM, Brian Stansberry >> <brian.stansberry(a)redhat.com&gt; wrote: >>> >>> That JMX operation (or the CLI equivalent[1]) will return 0.0.0.0 which >>> really is the bound address but AIUI isn't what's wanted. >>> >>> If the server is configured to use 0.0.0.0, there is no single >>> "WildFly.getHostAddress()". That setting means the relevant sockets will >>> be listening on all available interfaces on the machine. Which of those >>> is the one that's useful to a particular client depends on the network >>> topology. >>> >>> BTW, if you know the names of the nics in your target environment but >>> don't know the addresses, WildFly (and EAP) let you configure the >>> interfaces to use a particular nic. If binding to 0.0.0.0 is a >>> workaround for not knowing the actual addresses, that may help. For >>> example: >>> >>> <interface name="public"> >>> <nic name="eth0"/> >>> </interface> >>> >>> The 'name' attribute also allows expressions: >>> >>> <nic name="${my.public.nic:eth0}"/> >>> >>> With that kind of config, the JMX query Filippe showed will provide a >>> regular address. >>> >>> [1] The CLI op: >>> >>> [standalone@localhost:9990 /] >>> >>> /socket-binding-group=standard-sockets/socket-binding=http:read-attribute(name=bound-address) >>> { >>> "outcome" => "success", >>> "result" => "0.0.0.0" >>> } >>> >>> On 9/1/15 12:25 PM, Filippe spolti wrote: >>>> >>>> Hello Arun, >>>> >>>> I usethis code w/ Jboss 7 and wildfly 8, i didn't test with wildfly >>>> 9/10. >>>> >>>> MBeanServer mBeanServer = >>>> ManagementFactory.getPlatformMBeanServer(); >>>> String url = null; >>>> try { >>>> >>>> ObjectName http = new >>>> >>>> ObjectName("jboss.as:socket-binding-group=standard-sockets,socket-binding=http"); >>>> String jbossHttpAddress = (String) >>>> mBeanServer.getAttribute(http,"boundAddress"); >>>> int jbossHttpPort = (Integer) >>>> mBeanServer.getAttribute(http,"boundPort"); >>>> url = jbossHttpAddress + ":" + jbossHttpPort; >>>> log.fine("Url obtained from the system: " + url); >>>> } catch (Exception e) { >>>> log.severe(e.getStackTrace().toString()); >>>> } >>>> return url; >>>> >>>> regards. >>>> >>>> >>>> On 09/01/2015 02:20 PM, Arun Gupta wrote: >>>>> >>>>> Assuming WildFly is bound to all available IP addresses using -b >>>>> 0.0.0.0, is there a WildFly-specific API that can be used to obtain >>>>> the IP address where the server is running? >>>>> >>>>> Ideally, I'd like something like: >>>>> >>>>> WildFly.getHostAddress() >>>>> WildFly.getHostPort() >>>>> >>>>> It could be running in a Docker container, in AWS, on my local laptop, >>>>> in OpenShift, or any where else and would like the IP address to be >>>>> returned correctly. >>>>> >>>>> Suggestions? >>>>> >>>>> Arun >>>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> wildfly-dev mailing list >>>> wildfly-dev(a)lists.jboss.org >>>> https://lists.jboss.org/mailman/listinfo/wildfly-dev >>>> >>> >>> >>> -- >>> Brian Stansberry >>> Senior Principal Software Engineer >>> JBoss by Red Hat >>> _______________________________________________ >>> wildfly-dev mailing list >>> wildfly-dev(a)lists.jboss.org >>> https://lists.jboss.org/mailman/listinfo/wildfly-dev >> >> >> >> > > > -- > Brian Stansberry > Senior Principal Software Engineer > JBoss by Red Hat

>>> Is this scenario different from running multiple WildFly instances on a >>> single machine in a non-Docker setup? >> >> >> Good point, they are the same. >> > > Reading a bit more, it seems Docker gives each container its own address, > visible to the container via the eth0 interface: > > https://docs.docker.com/articles/networking/ Those IP addresses are not available externally AIU.

>> So, if WildFly runs with -b <IP_ADDRESS> then the utility above will >> give the correct address and port? >> > > Yes, assuming IP_ADDRESS != 0.0.0.0, the server config is using a > socket-binding named "http" for the web server, and the web server > address/port is the one you want. > ObjectName http = new ObjectName("jboss.as:socket-binding-group=standard-sockets,socket-binding=http"); hostName = (String) mBeanServer.getAttribute(http,"boundAddress"); hostPort = (Integer) mBeanServer.getAttribute(http,"boundPort"); seems to be returning correct HTTP host/port. However ObjectName https = new ObjectName("jboss.as:socket-binding-group=standard-sockets,socket-binding=https"); hostSecurePort = (int) mBeanServer.getAttribute(https, "boundPort"); is throwing NPE. Will this only be available if HTTPS port is accessible?

Arun

We do support some way to advertise (via jgroups) a different host/port than the one that it is actually bound to, right? I thought we had to add that functionality to support OpenShift, where the internal IP given to the AS is different than the externally visible host/port for clustering. On Wed, Sep 2, 2015 at 10:20 AM, Brian Stansberry <brian.stansberry(a)redhat.com <mailto:brian.stansberry@redhat.com>> wrote: On 9/1/15 6:52 PM, Arun Gupta wrote: >>>> Is this scenario different from running multiple WildFly instances on a >>>> single machine in a non-Docker setup? >>> >>> >>> Good point, they are the same. >>> >> >> Reading a bit more, it seems Docker gives each container its own address, >> visible to the container via the eth0 interface: >> >>https://docs.docker.com/articles/networking/ > > Those IP addresses are not available externally AIU. > Ok, I'm getting clear on your scenario. Thanks. >>> So, if WildFly runs with -b <IP_ADDRESS> then the utility above will >>> give the correct address and port? >>> >> >> Yes, assuming IP_ADDRESS != 0.0.0.0, the server config is using a >> socket-binding named "http" for the web server, and the web server >> address/port is the one you want. >> > > ObjectName http = new > ObjectName("jboss.as:socket-binding-group=standard-sockets,socket-binding=http"); > hostName = (String) mBeanServer.getAttribute(http,"boundAddress"); > hostPort = (Integer) mBeanServer.getAttribute(http,"boundPort"); > > > seems to be returning correct HTTP host/port. However > > ObjectName https = new > ObjectName("jboss.as:socket-binding-group=standard-sockets,socket-binding=https"); > hostSecurePort = (int) mBeanServer.getAttribute(https, "boundPort"); > > is throwing NPE. > > Will this only be available if HTTPS port is accessible? > Those attributes will only be non-null if the https socket-binding is used by some service (e.g. an undertow listener.) If the configuration doesn't require the socket binding to be used, then the resolution of the socket binding's config data to an actual IP address will not occur. > Arun > > > -- Brian Stansberry Senior Principal Software Engineer JBoss by Red Hat _______________________________________________ wildfly-dev mailing list wildfly-dev(a)lists.jboss.org <mailto:wildfly-dev@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/wildfly-dev

Hello Arun, I usethis code w/ Jboss 7 and wildfly 8, i didn't test with wildfly 9/10. MBeanServer mBeanServer = ManagementFactory.getPlatformMBeanServer(); String url = null; try { ObjectName http = new ObjectName("jboss.as:socket-binding-group=standard-sockets,socket-binding=http"); String jbossHttpAddress = (String) mBeanServer.getAttribute(http,"boundAddress"); int jbossHttpPort = (Integer) mBeanServer.getAttribute(http,"boundPort"); url = jbossHttpAddress + ":" + jbossHttpPort; log.fine("Url obtained from the system: " + url); } catch (Exception e) { log.severe(e.getStackTrace().toString()); } return url; regards. On 09/01/2015 02:20 PM, Arun Gupta wrote: Assuming WildFly is bound to all available IP addresses using -b 0.0.0.0, is there a WildFly-specific API that can be used to obtain the IP address where the server is running? Ideally, I'd like something like: WildFly.getHostAddress() WildFly.getHostPort() It could be running in a Docker container, in AWS, on my local laptop, in OpenShift, or any where else and would like the IP address to be returned correctly. Suggestions? Arun _______________________________________________ wildfly-dev mailing list wildfly-dev(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/wildfly-dev