9:12 p.m.
Thanks for the config but had to make a few more changes for my setup.
First problem was that the if there is a url instead of an IP as the keycloak server, it
seemed to cause problems.
Solution:
Had to replace the nginx config setting:
proxy_set_header Host $host;
With
proxy_set_header Host [auth-server-url in the keycloak.json file];
Second problem is that the keycloak/wildfly server kept using the nginx proxy’s IP in the
session management.
Solution:
Need a combination of nginx settings and wildfly settings.
Nginx needs to insert the forwarded for headers
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
Wildfly’s standalone/configuration/standalone.xml needs to read the forwarded for header
with proxy-address-forwarding=“true"
…
<subsystem xmlns="urn:jboss:domain:undertow:2.0">
<buffer-cache name="default"/>
<server name="default-server">
<http-listener name="default" socket-binding="http"
redirect-socket="https" proxy-address-forwarding="true" />
…
The second solution is sort of mentioned in the docs, but applicable to both http and
https and the xml seems out of date.
—Doug
From: Scott Rossillo
<srossillo@smartling.com<mailto:srossillo@smartling.com>>
Date: Thu, 24 Sep 2015 12:25:06 -0400
To: Kevin Thorpe <kevin.thorpe@p-i.net<mailto:kevin.thorpe@p-i.net>>
Cc: doug <dszeto@investlab.com<mailto:dszeto@investlab.com>>, keycloak-user
<keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>>
Subject: Re: [keycloak-user] Wrapping Keycloak under Nginx - redirect_uri problems
Here’s a working configuration with NGINX listening on 443 (https) and Keycloak / Wildfly
on 8080 (http). Note the proxy_set_header calls. The rest of the config is just for
completeness:
upstream keycloak {
server localhost:8080;
}
server {
listen 443;
server_name localhost;
ssl on;
ssl_certificate /etc/pki/tls/certs/server.crt;
ssl_certificate_key /etc/pki/tls/certs/server.key;
ssl_session_timeout 5m;
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
ssl_ciphers ALL:!ADH!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP;
ssl_prefer_server_ciphers on;
location / {
proxy_pass http://keycloak;
proxy_http_version 1.1;
proxy_set_header Connection "";
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto https;
}
}
Scott Rossillo
Smartling | Senior Software Engineer
srossillo@smartling.com<mailto:srossillo@smartling.com>
[Powered by Sigstr]<http://www.sigstr.com/>
On Sep 24, 2015, at 5:13 AM, Kevin Thorpe
<kevin.thorpe@p-i.net<mailto:kevin.thorpe@p-i.net>> wrote:
I got it working but as you've seen only if everyone contacts the Nginx IP. If the
back end
servers contact Keycloak directly then the validation fails because the token was issued
by 'a different server'.
I want to do the same thing as well. I want the front-end of our application to
authenticate
against the public address then all the back end servers running in Docker contact the
Keycloak docker container directly. The way I have it now I'm generating a lot of
traffic
between the Docker (actually Rancher) LAN and the external LAN.
I think we need a concept of service aliases so that a token issued by
https:my-public-name:443 would still be accepted by
http://keycloak:8080<http://keycloak:8080/> (as long as it
was indeed issued by that server under a different alias)
Kevin Thorpe
CTO
<pi_icon.jpg><https://www.p-i.net/>
<twitter.jpg><https://twitter.com/@PI_150>
www.p-i.net<http://www.p-i.net/> | @PI_150<https://twitter.com/@PI_150>
M: +44 (0)7425 160 368 | T: +44 (0)203 005 6750 | F: +44(0)207 730 2635
150 Buckingham Palace Road, London, SW1W 9TR, UK
[https://clients.p-i.net/documents/11003/1116416/BSI-UKAS.logo.jpg/8102853...]
[https://clients.p-i.net/documents/11003/1116416/ISO27001-2013.logo.jpeg/1...]
[https://clients.p-i.net/documents/11003/1116416/QMS.logo.jpeg/3925220d-bd...]
[https://clients.p-i.net/documents/11003/1116416/pci.png/773a04d4-f6ce-4b7...]
_____________________________
This email and any files transmitted with it are confidential and intended solely for the
use of the individual or entity to whom they are addressed. If you have received this
email in error please notify the system manager. This message contains confidential
information and is intended only for the individual named. If you are not the named
addressee you should not disseminate, distribute or copy this e-mail. Please notify the
sender immediately by e-mail if you have received this e-mail by mistake and delete this
e-mail from your system. If you are not the intended recipient you are notified that
disclosing, copying, distributing or taking any action in reliance on the contents of this
information is strictly prohibited.
"SAVE PAPER - THINK BEFORE YOU PRINT!"
On 24 September 2015 at 02:38, Doug Szeto
<DSzeto@investlab.com<mailto:DSzeto@investlab.com>> wrote:
Did you ever get the correct settings?
When I put nginx in front of keycloak, it generates access tokens tied to the nginx
server's IP instead of the browser's IP. This is apparent in the admin management
pages when you look up the active sessions.
The problem I'm having is there is a resource server that accepts bearer only tokens.
It uses a different server, and now fails the token validation check. Remove the nginx
servers and things work fine.
Any suggestions?
--Doug
________________________________
From:
keycloak-user-bounces@lists.jboss.org<mailto:keycloak-user-bounces@lists.jboss.org>
<keycloak-user-bounces@lists.jboss.org<mailto:keycloak-user-bounces@lists.jboss.org>>
on behalf of Kevin Thorpe <kevin.thorpe@p-i.net<mailto:kevin.thorpe@p-i.net>>
Sent: Friday, September 18, 2015 19:21
To: stian@redhat.com<mailto:stian@redhat.com>
Cc: keycloak-user
Subject: Re: [keycloak-user] Wrapping Keycloak under Nginx - redirect_uri problems
oh I see. I was copying the style of config from the developer who set up the test
Keycloak (assuming wrongly that he knew what he was doing). Setting it to the
actual site worked........ but now I have another problem :-(
Kevin Thorpe
CTO
[http://service.svc/s/GetFileAttachment?id=AAMkAGIxOTBjNDM0LTgxNDQtNDYxYi1...
[http://service.svc/s/GetFileAttachment?id=AAMkAGIxOTBjNDM0LTgxNDQtNDYxYi1...]
<https://twitter.com/@PI_150>
www.p-i.net<http://www.p-i.net/> | @PI_150<https://twitter.com/@PI_150>
M: +44 (0)7425 160 368 | T: +44 (0)203 005 6750 | F: +44(0)207 730 2635
150 Buckingham Palace Road, London, SW1W 9TR, UK
[https://clients.p-i.net/documents/11003/1116416/BSI-UKAS.logo.jpg/8102853...]
[https://clients.p-i.net/documents/11003/1116416/ISO27001-2013.logo.jpeg/1...]
[https://clients.p-i.net/documents/11003/1116416/QMS.logo.jpeg/3925220d-bd...]
[https://clients.p-i.net/documents/11003/1116416/pci.png/773a04d4-f6ce-4b7...]
_____________________________
This email and any files transmitted with it are confidential and intended solely for the
use of the individual or entity to whom they are addressed. If you have received this
email in error please notify the system manager. This message contains confidential
information and is intended only for the individual named. If you are not the named
addressee you should not disseminate, distribute or copy this e-mail. Please notify the
sender immediately by e-mail if you have received this e-mail by mistake and delete this
e-mail from your system. If you are not the intended recipient you are notified that
disclosing, copying, distributing or taking any action in reliance on the contents of this
information is strictly prohibited.
"SAVE PAPER - THINK BEFORE YOU PRINT!"
On 18 September 2015 at 11:59, Stian Thorgersen
<sthorger@redhat.com<mailto:sthorger@redhat.com>> wrote:
The * can only be on the end of the valid redirect uri. So you need to specify
'https://my-client.pibenchmark.com/*' or simply '*'. The latter not being
a good idea obviously.
On 18 September 2015 at 12:42, Kevin Thorpe
<kevin.thorpe@p-i.net<mailto:kevin.thorpe@p-i.net>> wrote:
Hi, I'm trying to wrap Keycloak behind Nginx for a client and I can't work out how
to
avoid the invalid parameter: redirect_uri problem.
Website is https://my-client.pibenchmark.com<https://my-client.pibenchmark.com/>
In nginx:
location /auth {
proxy_pass https://auth-service<https://auth-service/>;
}
upstream auth-service {
server my-keycloak:8443;
}
Then in Keycloak I have valid redirect URIs set to
https://*.pibenchmark.com/*<http://pibenchmark.com/*> ie my whole domain. Still
getting invalid parameter: redirect_uri though.
What am I doing wrong? Can I do this this way? I like to have one point of contact with
the internet for security reasons.
Kevin Thorpe
CTO, PI Limited
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
_______________________________________________
keycloak-user mailing list
keycloak-user@lists.jboss.org<mailto:keycloak-user@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/keycloak-user
