Hi, I wonder if it's possible to just check the SSO state with a confidential client. My use case is the following one: - I have a website which uses a confidential client to login with Keycloak. - I want to add autologin to this website. - So I use the javascript adapter with the following option object for the init method: { onLoad: 'check-sso' }. The javascript adapter is built without the secret key in its constructor (obviously if I put the secret key in there, there's no point to use a confidential client at all). But Keycloak fails with a "type=CODE_TO_TOKEN_ERROR, error=invalid_client_credentials" error. So I don't know how feasible or secure is to just check that the Keycloak session inside the cookie of the user's browser is still valid. In my case, the browser doesn't need to get the user info, access token, etc, because what I'll do is redirect the user to the Keycloak login page with the confidential client afterwards is the operation is successful. Since the Keycloak session is valid, Keycloak should redirect back with the authentication code without asking credentials to the user. Additional note: the CORS header isn't added to 400 responses in Keycloak, so it was a bit confusing looking at the JS console in the browser, because it complained about CORS but it was just Keycloak giving the 400 response without the allow-origin header. Thanks. -- *Tomás García Pérez * *Software Developer* *Intra**House*** _______________________________________________ keycloak-user mailing list keycloak-user(a)lists.jboss.org https://lists.jboss.org/mailman/listinfo/keycloak-user

Marek, I tried to manually call keycloak login url with prompt=none but it didn't redirect back to my redirect_uri, instead it stayed at the login page. Below is an example of the login url i'm calling. http://keycloak-domain.com.br/auth/realms/accounts/protocol/openid-connec... I need an URL to call to know if the user is logged in or not without being redirected to the login page. I need this because KeycloakSecurityContext is not available at not restricted URLs. -- Leonardo Nunes From: Marek Posolda <mposolda(a)redhat.com <mailto:mposolda@redhat.com>> Date: segunda-feira, 27 de junho de 2016 09:07 To: Tomás García <tomas(a)intrahouse.com <mailto:tomas@intrahouse.com>>, &quot;keycloak-user(a)lists.jboss.org <mailto:keycloak-user@lists.jboss.org>" <keycloak-user(a)lists.jboss.org <mailto:keycloak-user@lists.jboss.org>> Subject: Re: [keycloak-user] Question about the javascript-adapter and the check-sso option with a confidential client I think your possibilities are either: - Use different client for keycloak.js (public client) and different client for your confidential servlet application - Don't use keycloak.js at all, but instead do some HTTP Filter to deal with "autologin" . You will manually try to redirect to keycloak with "prompt=none" . If user is not logged, keycloak will redirect back to the callback redirect_uri, where you recognize if there is "code" or "error" parameter and based on that, you know if user is logged or not. If user is logged, you can redirect to secured URL to properly trigger authentication process (maybe you can optimize this step by reuse the "code", which you already have and directly open the secured URI with it, but I am not 100% sure if it works with considering that you also need correct "state" etc.) Otherwise, you can set some state or something, to recognize that autologin has been already unsuccessfully tried. Maybe you can create JIRA to request support "autologin" for other types of clients then public keycloak.js clients. Marek On 25/06/16 11:44, Tomás García wrote: > > Hi, > > I wonder if it's possible to just check the SSO state with a > confidential client. My use case is the following one: > > - I have a website which uses a confidential client to login with > Keycloak. > > - I want to add autologin to this website. > > - So I use the javascript adapter with the following option object > for the init method: { onLoad: 'check-sso' }. The javascript adapter > is built without the secret key in its constructor (obviously if I > put the secret key in there, there's no point to use a confidential > client at all). > > But Keycloak fails with a "type=CODE_TO_TOKEN_ERROR, > error=invalid_client_credentials" error. > > So I don't know how feasible or secure is to just check that the > Keycloak session inside the cookie of the user's browser is still > valid. In my case, the browser doesn't need to get the user info, > access token, etc, because what I'll do is redirect the user to the > Keycloak login page with the confidential client afterwards is the > operation is successful. Since the Keycloak session is valid, > Keycloak should redirect back with the authentication code without > asking credentials to the user. > > Additional note: the CORS header isn't added to 400 responses in > Keycloak, so it was a bit confusing looking at the JS console in the > browser, because it complained about CORS but it was just Keycloak > giving the 400 response without the allow-origin header. > > Thanks. > > -- > > *Tomás García Pérez > * > > *Software Developer* > > *Intra**House*** > > > > > _______________________________________________ > keycloak-user mailing list > keycloak-user@lists.jboss.orghttps://lists.jboss.org/mailman/listinfo/keycloak-user ------------------------------------------------------------------------ /Esta mensagem pode conter informação confidencial e/ou privilegiada. Se você não for o destinatário ou a pessoa autorizada a receber esta mensagem, não poderá usar, copiar ou divulgar as informações nela contidas ou tomar qualquer ação baseada nessas informações. Se você recebeu esta mensagem por engano, por favor avise imediatamente o remetente, respondendo o e-mail e em seguida apague-o. Agradecemos sua cooperação. This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation/

Marek, after I encoded the redirect_uri parameter it worked. When I try to access a restricted page and I'm not logged in I saw that an AuthChallenge with a redirect uri is returned. Is there a way to configure prompt=none to be added to this redirect uri?

I'm my case I wouldn't like to be automatically redirected to the login page when i'm not logged in. Instead I would like to be redirected back to my page when the user is not logged in. -- Leonardo Nunes From: Marek Posolda <mposolda(a)redhat.com <mailto:mposolda@redhat.com>> Date: terça-feira, 28 de junho de 2016 03:00 To: Leonardo Nunes <leo.nunes(a)gjccorp.com.br <mailto:leo.nunes@gjccorp.com.br>>, Tomás García <tomas(a)intrahouse.com <mailto:tomas@intrahouse.com>>, &quot;keycloak-user(a)lists.jboss.org <mailto:keycloak-user@lists.jboss.org>" <keycloak-user(a)lists.jboss.org <mailto:keycloak-user@lists.jboss.org>> Subject: Re: [keycloak-user] Question about the javascript-adapter and the check-sso option with a confidential client Not sure why prompt=none doesn't work as expected... Are you manually opening this URL? Maybe it will help if you url-encode the value of redirect_uri parameter (in your example it's not encoded). Marek On 27/06/16 15:38, LEONARDO NUNES wrote: > Marek, I tried to manually call keycloak login url with prompt=none > but it didn't redirect back to my redirect_uri, instead it stayed at > the login page. > Below is an example of the login url i'm calling. > > http://keycloak-domain.com.br/auth/realms/accounts/protocol/openid-connec... > > I need an URL to call to know if the user is logged in or not without > being redirected to the login page. > I need this because KeycloakSecurityContext is not available at not > restricted URLs. > > > -- > Leonardo Nunes > > > From: Marek Posolda <mposolda(a)redhat.com <mailto:mposolda@redhat.com>> > Date: segunda-feira, 27 de junho de 2016 09:07 > To: Tomás García <tomas(a)intrahouse.com&gt;, > &quot;keycloak-user(a)lists.jboss.org > <mailto:keycloak-user@lists.jboss.org>" > <keycloak-user(a)lists.jboss.org <mailto:keycloak-user@lists.jboss.org>> > Subject: Re: [keycloak-user] Question about the javascript-adapter > and the check-sso option with a confidential client > > I think your possibilities are either: > - Use different client for keycloak.js (public client) and different > client for your confidential servlet application > - Don't use keycloak.js at all, but instead do some HTTP Filter to > deal with "autologin" . You will manually try to redirect to keycloak > with "prompt=none" . If user is not logged, keycloak will redirect > back to the callback redirect_uri, where you recognize if there is > "code" or "error" parameter and based on that, you know if user is > logged or not. If user is logged, you can redirect to secured URL to > properly trigger authentication process (maybe you can optimize this > step by reuse the "code", which you already have and directly open > the secured URI with it, but I am not 100% sure if it works with > considering that you also need correct "state" etc.) Otherwise, you > can set some state or something, to recognize that autologin has been > already unsuccessfully tried. > > Maybe you can create JIRA to request support "autologin" for other > types of clients then public keycloak.js clients. > > Marek > > On 25/06/16 11:44, Tomás García wrote: >> >> Hi, >> >> I wonder if it's possible to just check the SSO state with a >> confidential client. My use case is the following one: >> >> - I have a website which uses a confidential client to login with >> Keycloak. >> >> - I want to add autologin to this website. >> >> - So I use the javascript adapter with the following option object >> for the init method: { onLoad: 'check-sso' }. The javascript adapter >> is built without the secret key in its constructor (obviously if I >> put the secret key in there, there's no point to use a confidential >> client at all). >> >> But Keycloak fails with a "type=CODE_TO_TOKEN_ERROR, >> error=invalid_client_credentials" error. >> >> So I don't know how feasible or secure is to just check that the >> Keycloak session inside the cookie of the user's browser is still >> valid. In my case, the browser doesn't need to get the user info, >> access token, etc, because what I'll do is redirect the user to the >> Keycloak login page with the confidential client afterwards is the >> operation is successful. Since the Keycloak session is valid, >> Keycloak should redirect back with the authentication code without >> asking credentials to the user. >> >> Additional note: the CORS header isn't added to 400 responses in >> Keycloak, so it was a bit confusing looking at the JS console in the >> browser, because it complained about CORS but it was just Keycloak >> giving the 400 response without the allow-origin header. >> >> Thanks. >> >> -- >> >> *Tomás García Pérez >> * >> >> *Software Developer* >> >> *Intra**House*** >> >> >> >> >> _______________________________________________ >> keycloak-user mailing list >> keycloak-user@lists.jboss.orghttps://lists.jboss.org/mailman/listinfo/keycloak-user > > ------------------------------------------------------------------------ > /Esta mensagem pode conter informação confidencial e/ou privilegiada. > Se você não for o destinatário ou a pessoa autorizada a receber esta > mensagem, não poderá usar, copiar ou divulgar as informações nela > contidas ou tomar qualquer ação baseada nessas informações. Se você > recebeu esta mensagem por engano, por favor avise imediatamente o > remetente, respondendo o e-mail e em seguida apague-o. Agradecemos > sua cooperação. > > This message may contain confidential and/or privileged information. > If you are not the addressee or authorized to receive this for the > addressee, you must not use, copy, disclose or take any action based > on this message or any information herein. If you have received this > message in error, please advise the sender immediately by reply > e-mail and delete this message. Thank you for your cooperation/

On 06/27/2016 01:07 PM, Marek Posolda wrote: > I think your possibilities are either: > - Use different client for keycloak.js (public client) and different > client for your confidential servlet application I thought about it, but at the moment I thought about what is the point of having the confidential client if the public one is needed, I discarded that option. Since the autologin affects the same website, there's no point to have two clients attacking the same resource. The public client is the weakest link of the chain, so having a secret key doesn't add anything to security; only for accountability, maybe. > - Don't use keycloak.js at all, but instead do some HTTP Filter to > deal with "autologin" . You will manually try to redirect to keycloak > with "prompt=none" . If user is not logged, keycloak will redirect > back to the callback redirect_uri, where you recognize if there is > "code" or "error" parameter and based on that, you know if user is > logged or not. If user is logged, you can redirect to secured URL to > properly trigger authentication process (maybe you can optimize this > step by reuse the "code", which you already have and directly open > the secured URI with it, but I am not 100% sure if it works with > considering that you also need correct "state" etc.) Otherwise, you > can set some state or something, to recognize that autologin has been > already unsuccessfully tried. Oh well, it's a website made in PHP, not a servlet, but the same idea can be applied. But I had to discard that option too due to technical reasons: I'm not exactly in control of the whole website, since I'm adding the autologin to a project I didn't work on in the past, which isn't as well engineered for extensibility as Keycloak :).

> > Maybe you can create JIRA to request support "autologin" for other > types of clients then public keycloak.js clients. Thanks, Marek. I'll think about it. It's very likely that I'll open a JIRA issue to discuss this further. > > Marek > > On 25/06/16 11:44, Tomás García wrote: >> >> Hi, >> >> I wonder if it's possible to just check the SSO state with a >> confidential client. My use case is the following one: >> >> - I have a website which uses a confidential client to login with >> Keycloak. >> >> - I want to add autologin to this website. >> >> - So I use the javascript adapter with the following option object >> for the init method: { onLoad: 'check-sso' }. The javascript adapter >> is built without the secret key in its constructor (obviously if I >> put the secret key in there, there's no point to use a confidential >> client at all). >> >> But Keycloak fails with a "type=CODE_TO_TOKEN_ERROR, >> error=invalid_client_credentials" error. >> >> So I don't know how feasible or secure is to just check that the >> Keycloak session inside the cookie of the user's browser is still >> valid. In my case, the browser doesn't need to get the user info, >> access token, etc, because what I'll do is redirect the user to the >> Keycloak login page with the confidential client afterwards is the >> operation is successful. Since the Keycloak session is valid, >> Keycloak should redirect back with the authentication code without >> asking credentials to the user. >> >> Additional note: the CORS header isn't added to 400 responses in >> Keycloak, so it was a bit confusing looking at the JS console in the >> browser, because it complained about CORS but it was just Keycloak >> giving the 400 response without the allow-origin header. >> >> Thanks. >> >> -- >> >> *Tomás García Pérez >> * >> >> *Software Developer* >> >> *Intra**House*** >> >> >> >> >> _______________________________________________ >> keycloak-user mailing list >> keycloak-user(a)lists.jboss.org >> https://lists.jboss.org/mailman/listinfo/keycloak-user > -- *Tomás García Pérez * *Software Developer* *Intra**House***