10:20 p.m.
Thx. I was able to zip up my laptop version and ssh over to make it work (i.e. bring up
admin console). With RHEL VMs, there is no easy way to bring up a local browser so the old
defaults were more convenient for those that do dev/test in the cloud.
8:08 a.m.
New subject: Unable to start Keycloak beta on AWS VM - HTTPS required
Yep, the old approach was more convenient. With local VMs you'll most likely be using
a IP address in the range that we permit non-https to when set to external
(http://en.wikipedia.org/wiki/Private_network). For PaaS (i.e. OpenShift) the provider
usually sets up https for you so it's not a problem, but I guess the remaining issue
is for IaaS (i.e. AWS). If there's demand for it we could add some mechanism to
disable it for dev without having to use the admin console.
----- Original Message -----
From: "Christina Lau" <christinalau28(a)icloud.com>
To: keycloak-user(a)lists.jboss.org
Sent: Tuesday, 26 August, 2014 10:20:21 PM
Subject: Re: [keycloak-user] Unable to start Keycloak beta on AWS VM - HTTPS required
Thx. I was able to zip up my laptop version and ssh over to make it work
(i.e. bring up admin console). With RHEL VMs, there is no easy way to bring
up a local browser so the old defaults were more convenient for those that
do dev/test in the cloud.
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-user
3:56 p.m.
New subject: Unable to start Keycloak beta on AWS VM - HTTPS required
Hello!
I'm trying to do this on AWS too. I'm using
keycloak-appliance-dist-all-1.2.0.Beta1 , is there a way to disabled the
https by a configuration parameter?? I need to create a Dev environment
real quick and I don't want to set the https for that, I couldn't find a
way or file to do this.
Thanks a lot!!
Rodrigo.
On Wed, Aug 27, 2014 at 2:08 AM, Stian Thorgersen <stian(a)redhat.com> wrote:
Yep, the old approach was more convenient. With local VMs you'll
most
likely be using a IP address in the range that we permit non-https to when
set to external (http://en.wikipedia.org/wiki/Private_network). For PaaS
(i.e. OpenShift) the provider usually sets up https for you so it's not a
problem, but I guess the remaining issue is for IaaS (i.e. AWS). If there's
demand for it we could add some mechanism to disable it for dev without
having to use the admin console.
----- Original Message -----
> From: "Christina Lau" <christinalau28(a)icloud.com>
> To: keycloak-user(a)lists.jboss.org
> Sent: Tuesday, 26 August, 2014 10:20:21 PM
> Subject: Re: [keycloak-user] Unable to start Keycloak beta on AWS VM -
HTTPS required
>
> Thx. I was able to zip up my laptop version and ssh over to make it work
> (i.e. bring up admin console). With RHEL VMs, there is no easy way to
bring
> up a local browser so the old defaults were more convenient for those
that
> do dev/test in the cloud.
> _______________________________________________
> keycloak-user mailing list
> keycloak-user(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/keycloak-user
>
_______________________________________________
keycloak-user mailing list
keycloak-user(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/keycloak-user
4:01 p.m.
New subject: Unable to start Keycloak beta on AWS VM - HTTPS required
You could start the server locally and change the setting through the admin console,
export the master realm, then when you provision it on AWS import the master realm.
Other than that there's nothing available atm.
----- Original Message -----
From: "Rodrigo Del Canto" <delkant(a)gmail.com>
To: "Stian Thorgersen" <stian(a)redhat.com>
Cc: "Christina Lau" <christinalau28(a)icloud.com>,
keycloak-user(a)lists.jboss.org
Sent: Thursday, 23 April, 2015 3:56:26 PM
Subject: Re: [keycloak-user] Unable to start Keycloak beta on AWS VM - HTTPS required
Hello!
I'm trying to do this on AWS too. I'm using
keycloak-appliance-dist-all-1.2.0.Beta1 , is there a way to disabled the
https by a configuration parameter?? I need to create a Dev environment
real quick and I don't want to set the https for that, I couldn't find a
way or file to do this.
Thanks a lot!!
Rodrigo.
On Wed, Aug 27, 2014 at 2:08 AM, Stian Thorgersen <stian(a)redhat.com> wrote:
> Yep, the old approach was more convenient. With local VMs you'll most
> likely be using a IP address in the range that we permit non-https to when
> set to external (http://en.wikipedia.org/wiki/Private_network). For PaaS
> (i.e. OpenShift) the provider usually sets up https for you so it's not a
> problem, but I guess the remaining issue is for IaaS (i.e. AWS). If there's
> demand for it we could add some mechanism to disable it for dev without
> having to use the admin console.
>
> ----- Original Message -----
> > From: "Christina Lau" <christinalau28(a)icloud.com>
> > To: keycloak-user(a)lists.jboss.org
> > Sent: Tuesday, 26 August, 2014 10:20:21 PM
> > Subject: Re: [keycloak-user] Unable to start Keycloak beta on AWS VM -
> HTTPS required
> >
> > Thx. I was able to zip up my laptop version and ssh over to make it work
> > (i.e. bring up admin console). With RHEL VMs, there is no easy way to
> bring
> > up a local browser so the old defaults were more convenient for those
> that
> > do dev/test in the cloud.
> > _______________________________________________
> > keycloak-user mailing list
> > keycloak-user(a)lists.jboss.org
> > https://lists.jboss.org/mailman/listinfo/keycloak-user
> >
> _______________________________________________
> keycloak-user mailing list
> keycloak-user(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/keycloak-user
>
4:36 p.m.
New subject: Unable to start Keycloak beta on AWS VM - HTTPS required
Hi,
On Thu, 23 Apr 2015 10:01:13 -0400 (EDT)
Stian Thorgersen <stian(a)redhat.com> wrote:
Other than that there's nothing available atm.
A quick hack is to do port forwarding via SSH, e.g:
ssh -L 8080 localhost:8080 user@host
If you're connected via ssh, accessing your http://localhost:8080 will
connect to the remote server as if it was locally, and AFAIK localhost
doesn't require https.
After login in, you can change the realm settings to not require https
for external connections.
My five cents,
--
Iván
7:46 p.m.
New subject: Unable to start Keycloak beta on AWS VM - HTTPS required
Thank you! but I ended up installing keycloak on a production box with
https, I will move my installation in the future.
On Thu, Apr 23, 2015 at 10:36 AM, Iván Perdomo <ivan(a)akvo.org> wrote:
Hi,
On Thu, 23 Apr 2015 10:01:13 -0400 (EDT)
Stian Thorgersen <stian(a)redhat.com> wrote:
> Other than that there's nothing available atm.
A quick hack is to do port forwarding via SSH, e.g:
ssh -L 8080 localhost:8080 user@host
If you're connected via ssh, accessing your http://localhost:8080 will
connect to the remote server as if it was locally, and AFAIK localhost
doesn't require https.
After login in, you can change the realm settings to not require https
for external connections.
My five cents,
--
Iván
3291
days inactive
3531
days old
5 comments
4 participants
participants (4)
-
Christina Lau -
Iván Perdomo -
Rodrigo Del Canto -
Stian Thorgersen