3:56 p.m.
I just tried installing the agent to use securityKey/securitySecret rather than
username/password and it failed to authenticate with the server. If I use
username/password, it works fine.
It isn't anything with the agent that seems to be the problem because during my
testing, I attached to the agent with my debugger and right before I sent the auth message
to
http://127.0.0.1:8080/hawkular/accounts/personas/current
I change the value of the key/secret to "jdoe" and "password" and it
works. So there is something on the server-side that doesn't like the agent passing in
the token credentials.
Can I ask if anyone else sees the same thing? It's easy to test:
1) in the UI, create yourself a new token
2) in standalone.xml's <storage-adapter> element, change the
"username" attribute name to be called "securityKey" and set its value
to your new token's key and change the "password" attribute name to be
called "securitySecret" and set its value to your new token's secret.
3) start the agent back up again
It should work, but doesn't for me. I tried it with two different token key/secret
pairs, failed both times.
9:03 p.m.
It happened to me too yesterday but i was thinking might be I am not
properly using the tokens coz I am new to it.
But was following the same procedure.
On 23 Jan 2016 3:26 am, "John Mazzitelli" <mazz(a)redhat.com> wrote:
I just tried installing the agent to use securityKey/securitySecret
rather
than username/password and it failed to authenticate with the server. If I
use username/password, it works fine.
It isn't anything with the agent that seems to be the problem because
during my testing, I attached to the agent with my debugger and right
before I sent the auth message to
http://127.0.0.1:8080/hawkular/accounts/personas/current
I change the value of the key/secret to "jdoe" and "password" and it
works. So there is something on the server-side that doesn't like the agent
passing in the token credentials.
Can I ask if anyone else sees the same thing? It's easy to test:
1) in the UI, create yourself a new token
2) in standalone.xml's <storage-adapter> element, change the
"username"
attribute name to be called "securityKey" and set its value to your new
token's key and change the "password" attribute name to be called
"securitySecret" and set its value to your new token's secret.
3) start the agent back up again
It should work, but doesn't for me. I tried it with two different token
key/secret pairs, failed both times.
_______________________________________________
hawkular-dev mailing list
hawkular-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/hawkular-dev
9:19 a.m.
New subject: Fwd: agent cannot use security token
Juca - can you take a look and tell me if its a problem in accounts/keycloak? Based on my
testing I think that's where the problem lies, but I'm not 100% sure.
Just create yourself a token and configure the agent to use it rather than
username/password and you should be able replicate the problem.
----- Forwarded Message -----
From: "Anuj Garg" <anuj1708(a)gmail.com>
To: "John Mazzitelli" <mazz(a)redhat.com>, "Discussions around Hawkular
development" <hawkular-dev(a)lists.jboss.org>
Sent: Friday, January 22, 2016 10:03:12 PM
Subject: Re: [Hawkular-dev] agent cannot use security token
It happened to me too yesterday but i was thinking might be I am not
properly using the tokens coz I am new to it.
But was following the same procedure.
On 23 Jan 2016 3:26 am, "John Mazzitelli" <mazz(a)redhat.com> wrote:
I just tried installing the agent to use securityKey/securitySecret
rather
than username/password and it failed to authenticate with the server. If I
use username/password, it works fine.
It isn't anything with the agent that seems to be the problem because
during my testing, I attached to the agent with my debugger and right
before I sent the auth message to
http://127.0.0.1:8080/hawkular/accounts/personas/current
I change the value of the key/secret to "jdoe" and "password" and it
works. So there is something on the server-side that doesn't like the agent
passing in the token credentials.
Can I ask if anyone else sees the same thing? It's easy to test:
1) in the UI, create yourself a new token
2) in standalone.xml's <storage-adapter> element, change the
"username"
attribute name to be called "securityKey" and set its value to your new
token's key and change the "password" attribute name to be called
"securitySecret" and set its value to your new token's secret.
3) start the agent back up again
It should work, but doesn't for me. I tried it with two different token
key/secret pairs, failed both times.
_______________________________________________
hawkular-dev mailing list
hawkular-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/hawkular-dev
9:43 a.m.
Anuj, Mazz,
On 23 Jan 2016, at 16:19, John Mazzitelli wrote:
Juca - can you take a look and tell me if its a problem in
accounts/keycloak? Based on my testing I think that's where the
problem lies, but I'm not 100% sure.
Does this work (for a previously created token):
curl -H 'Accept: application/json' -i -u
b3063b1f-640b-4853-81df-47257c01e63e:94edc711ef80c592cb417bfffd9bc496
http://localhost:8080/hawkular/accounts/personas/current
?
( from
http://www.hawkular.org/blog/2015/12/16/hawkular-1.0.0.Alpha8-released.html
)
Just create yourself a token and configure the agent to use it rather
than username/password and you should be able replicate the problem.
----- Forwarded Message -----
From: "Anuj Garg" <anuj1708(a)gmail.com>
To: "John Mazzitelli" <mazz(a)redhat.com>, "Discussions around
Hawkular
development" <hawkular-dev(a)lists.jboss.org>
Sent: Friday, January 22, 2016 10:03:12 PM
Subject: Re: [Hawkular-dev] agent cannot use security token
It happened to me too yesterday but i was thinking might be I am not
properly using the tokens coz I am new to it.
But was following the same procedure.
On 23 Jan 2016 3:26 am, "John Mazzitelli" <mazz(a)redhat.com> wrote:
> I just tried installing the agent to use securityKey/securitySecret
> rather
> than username/password and it failed to authenticate with the server.
> If I
> use username/password, it works fine.
>
> It isn't anything with the agent that seems to be the problem because
> during my testing, I attached to the agent with my debugger and right
> before I sent the auth message to
>
> http://127.0.0.1:8080/hawkular/accounts/personas/current
>
> I change the value of the key/secret to "jdoe" and "password" and
it
> works. So there is something on the server-side that doesn't like the
> agent
> passing in the token credentials.
>
> Can I ask if anyone else sees the same thing? It's easy to test:
>
> 1) in the UI, create yourself a new token
> 2) in standalone.xml's <storage-adapter> element, change the
> "username"
> attribute name to be called "securityKey" and set its value to your
> new
> token's key and change the "password" attribute name to be called
> "securitySecret" and set its value to your new token's secret.
> 3) start the agent back up again
>
> It should work, but doesn't for me. I tried it with two different
> token
> key/secret pairs, failed both times.
> _______________________________________________
> hawkular-dev mailing list
> hawkular-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/hawkular-dev
>
_______________________________________________
hawkular-dev mailing list
hawkular-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/hawkular-dev
--
Reg. Adresse: Red Hat GmbH, Technopark II, Haus C,
Werner-von-Siemens-Ring 14, D-85630 Grasbrunn
Handelsregister: Amtsgericht München HRB 153243
Geschäftsführer: Charles Cachera, Michael Cunningham, Paul Hickey,
Charlie Peters
2:56 a.m.
On Command:
curl -H 'Accept: application/json' -i -u
162e869a-1f22-4aba-a620-d07edb906df9:110af61f265c04e728f3fc9951afda8c
http://192.168.1.11:8080/hawkular/accounts/personas/current
Response is:
HTTP/1.1 403 Forbidden
Connection: keep-alive
X-Powered-By: Undertow/1
Server: WildFly/10
Content-Length: 74
Content-Type: text/html
Date: Mon, 25 Jan 2016 08:47:23 GMT
<html><head><title>Error</title></head><body>403 -
Forbidden</body></html>
but replacing token key and secrete with username and password showing
correct results
On Sat, Jan 23, 2016 at 9:13 PM, Heiko W.Rupp <hrupp(a)redhat.com> wrote:
Anuj, Mazz,
On 23 Jan 2016, at 16:19, John Mazzitelli wrote:
> Juca - can you take a look and tell me if its a problem in
> accounts/keycloak? Based on my testing I think that's where the
> problem lies, but I'm not 100% sure.
Does this work (for a previously created token):
curl -H 'Accept: application/json' -i -u
b3063b1f-640b-4853-81df-47257c01e63e:94edc711ef80c592cb417bfffd9bc496
http://localhost:8080/hawkular/accounts/personas/current
?
( from
http://www.hawkular.org/blog/2015/12/16/hawkular-1.0.0.Alpha8-released.html
)
>
> Just create yourself a token and configure the agent to use it rather
> than username/password and you should be able replicate the problem.
>
> ----- Forwarded Message -----
> From: "Anuj Garg" <anuj1708(a)gmail.com>
> To: "John Mazzitelli" <mazz(a)redhat.com>, "Discussions around
Hawkular
> development" <hawkular-dev(a)lists.jboss.org>
> Sent: Friday, January 22, 2016 10:03:12 PM
> Subject: Re: [Hawkular-dev] agent cannot use security token
>
> It happened to me too yesterday but i was thinking might be I am not
> properly using the tokens coz I am new to it.
> But was following the same procedure.
> On 23 Jan 2016 3:26 am, "John Mazzitelli" <mazz(a)redhat.com> wrote:
>
>> I just tried installing the agent to use securityKey/securitySecret
>> rather
>> than username/password and it failed to authenticate with the server.
>> If I
>> use username/password, it works fine.
>>
>> It isn't anything with the agent that seems to be the problem because
>> during my testing, I attached to the agent with my debugger and right
>> before I sent the auth message to
>>
>> http://127.0.0.1:8080/hawkular/accounts/personas/current
>>
>> I change the value of the key/secret to "jdoe" and
"password" and it
>> works. So there is something on the server-side that doesn't like the
>> agent
>> passing in the token credentials.
>>
>> Can I ask if anyone else sees the same thing? It's easy to test:
>>
>> 1) in the UI, create yourself a new token
>> 2) in standalone.xml's <storage-adapter> element, change the
>> "username"
>> attribute name to be called "securityKey" and set its value to your
>> new
>> token's key and change the "password" attribute name to be called
>> "securitySecret" and set its value to your new token's secret.
>> 3) start the agent back up again
>>
>> It should work, but doesn't for me. I tried it with two different
>> token
>> key/secret pairs, failed both times.
>> _______________________________________________
>> hawkular-dev mailing list
>> hawkular-dev(a)lists.jboss.org
>> https://lists.jboss.org/mailman/listinfo/hawkular-dev
>>
> _______________________________________________
> hawkular-dev mailing list
> hawkular-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/hawkular-dev
--
Reg. Adresse: Red Hat GmbH, Technopark II, Haus C,
Werner-von-Siemens-Ring 14, D-85630 Grasbrunn
Handelsregister: Amtsgericht München HRB 153243
Geschäftsführer: Charles Cachera, Michael Cunningham, Paul Hickey,
Charlie Peters
_______________________________________________
hawkular-dev mailing list
hawkular-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/hawkular-dev
3:13 a.m.
OK, that's the same issue as Mazz then. I'm looking into it.
- Juca.
On 25.01.2016 09:56, Anuj Garg wrote:
On Command:
curl -H 'Accept: application/json' -i -u
162e869a-1f22-4aba-a620-d07edb906df9:110af61f265c04e728f3fc9951afda8c
http://192.168.1.11:8080/hawkular/accounts/personas/current
Response is:
HTTP/1.1 403 Forbidden
Connection: keep-alive
X-Powered-By: Undertow/1
Server: WildFly/10
Content-Length: 74
Content-Type: text/html
Date: Mon, 25 Jan 2016 08:47:23 GMT
<html><head><title>Error</title></head><body>403 -
Forbidden</body></html>
but replacing token key and secrete with username and password showing
correct results
On Sat, Jan 23, 2016 at 9:13 PM, Heiko W.Rupp <hrupp(a)redhat.com
<mailto:hrupp@redhat.com>> wrote:
Anuj, Mazz,
On 23 Jan 2016, at 16:19, John Mazzitelli wrote:
> Juca - can you take a look and tell me if its a problem in
> accounts/keycloak? Based on my testing I think that's where the
> problem lies, but I'm not 100% sure.
Does this work (for a previously created token):
curl -H 'Accept: application/json' -i -u
b3063b1f-640b-4853-81df-47257c01e63e:94edc711ef80c592cb417bfffd9bc496
http://localhost:8080/hawkular/accounts/personas/current
?
( from
http://www.hawkular.org/blog/2015/12/16/hawkular-1.0.0.Alpha8-released.html
)
>
> Just create yourself a token and configure the agent to use it rather
> than username/password and you should be able replicate the problem.
>
> ----- Forwarded Message -----
> From: "Anuj Garg" <anuj1708(a)gmail.com
<mailto:anuj1708@gmail.com>>
> To: "John Mazzitelli" <mazz(a)redhat.com
<mailto:mazz@redhat.com>>,
"Discussions around Hawkular
> development" <hawkular-dev(a)lists.jboss.org
<mailto:hawkular-dev@lists.jboss.org>>
> Sent: Friday, January 22, 2016 10:03:12 PM
> Subject: Re: [Hawkular-dev] agent cannot use security token
>
> It happened to me too yesterday but i was thinking might be I am not
> properly using the tokens coz I am new to it.
> But was following the same procedure.
> On 23 Jan 2016 3:26 am, "John Mazzitelli" <mazz(a)redhat.com
<mailto:mazz@redhat.com>> wrote:
>
>> I just tried installing the agent to use securityKey/securitySecret
>> rather
>> than username/password and it failed to authenticate with the
server.
>> If I
>> use username/password, it works fine.
>>
>> It isn't anything with the agent that seems to be the problem
because
>> during my testing, I attached to the agent with my debugger and
right
>> before I sent the auth message to
>>
>> http://127.0.0.1:8080/hawkular/accounts/personas/current
>>
>> I change the value of the key/secret to "jdoe" and
"password" and it
>> works. So there is something on the server-side that doesn't
like the
>> agent
>> passing in the token credentials.
>>
>> Can I ask if anyone else sees the same thing? It's easy to test:
>>
>> 1) in the UI, create yourself a new token
>> 2) in standalone.xml's <storage-adapter> element, change the
>> "username"
>> attribute name to be called "securityKey" and set its value to
your
>> new
>> token's key and change the "password" attribute name to be
called
>> "securitySecret" and set its value to your new token's
secret.
>> 3) start the agent back up again
>>
>> It should work, but doesn't for me. I tried it with two different
>> token
>> key/secret pairs, failed both times.
>> _______________________________________________
>> hawkular-dev mailing list
>> hawkular-dev(a)lists.jboss.org <mailto:hawkular-dev@lists.jboss.org>
>> https://lists.jboss.org/mailman/listinfo/hawkular-dev
>>
> _______________________________________________
> hawkular-dev mailing list
> hawkular-dev(a)lists.jboss.org <mailto:hawkular-dev@lists.jboss.org>
> https://lists.jboss.org/mailman/listinfo/hawkular-dev
--
Reg. Adresse: Red Hat GmbH, Technopark II, Haus C,
Werner-von-Siemens-Ring 14, D-85630 Grasbrunn
Handelsregister: Amtsgericht München HRB 153243
Geschäftsführer: Charles Cachera, Michael Cunningham, Paul Hickey,
Charlie Peters
_______________________________________________
hawkular-dev mailing list
hawkular-dev(a)lists.jboss.org <mailto:hawkular-dev@lists.jboss.org>
https://lists.jboss.org/mailman/listinfo/hawkular-dev
_______________________________________________
hawkular-dev mailing list
hawkular-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/hawkular-dev
2:42 a.m.
OK, I'm able to reproduce it. It seems to work at first, but then start
failing once the server is rebooted (!!).
- Juca.
On 22.01.2016 22:56, John Mazzitelli wrote:
I just tried installing the agent to use securityKey/securitySecret
rather than username/password and it failed to authenticate with the server. If I use
username/password, it works fine.
It isn't anything with the agent that seems to be the problem because during my
testing, I attached to the agent with my debugger and right before I sent the auth message
to
http://127.0.0.1:8080/hawkular/accounts/personas/current
I change the value of the key/secret to "jdoe" and "password" and it
works. So there is something on the server-side that doesn't like the agent passing in
the token credentials.
Can I ask if anyone else sees the same thing? It's easy to test:
1) in the UI, create yourself a new token
2) in standalone.xml's <storage-adapter> element, change the
"username" attribute name to be called "securityKey" and set its value
to your new token's key and change the "password" attribute name to be
called "securitySecret" and set its value to your new token's secret.
3) start the agent back up again
It should work, but doesn't for me. I tried it with two different token key/secret
pairs, failed both times.
_______________________________________________
hawkular-dev mailing list
hawkular-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/hawkular-dev
6:40 a.m.
HAWKULAR-968 created, PR sent to hawkular/master.
- Juca.
On 25.01.2016 09:42, Juraci Paixão Kröhling wrote:
OK, I'm able to reproduce it. It seems to work at first, but then
start
failing once the server is rebooted (!!).
- Juca.
On 22.01.2016 22:56, John Mazzitelli wrote:
> I just tried installing the agent to use securityKey/securitySecret rather than
username/password and it failed to authenticate with the server. If I use
username/password, it works fine.
>
> It isn't anything with the agent that seems to be the problem because during my
testing, I attached to the agent with my debugger and right before I sent the auth message
to
>
> http://127.0.0.1:8080/hawkular/accounts/personas/current
>
> I change the value of the key/secret to "jdoe" and "password" and
it works. So there is something on the server-side that doesn't like the agent passing
in the token credentials.
>
> Can I ask if anyone else sees the same thing? It's easy to test:
>
> 1) in the UI, create yourself a new token
> 2) in standalone.xml's <storage-adapter> element, change the
"username" attribute name to be called "securityKey" and set its value
to your new token's key and change the "password" attribute name to be
called "securitySecret" and set its value to your new token's secret.
> 3) start the agent back up again
>
> It should work, but doesn't for me. I tried it with two different token
key/secret pairs, failed both times.
> _______________________________________________
> hawkular-dev mailing list
> hawkular-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/hawkular-dev
>
_______________________________________________
hawkular-dev mailing list
hawkular-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/hawkular-dev
3259
days inactive
3262
days old
7 comments
4 participants
participants (4)
-
Anuj Garg -
Heiko W.Rupp -
John Mazzitelli -
Juraci Paixão Kröhling