5:09 p.m.
Jirka put together a small UI and enhanced the download servlet, which I then went in and
enhanced further, so you can now get a wildfly agent installer.
Here's quickly how it should work:
1) Go to the UI and fill in the fields, submit it, and you should be able to save the
installer jar you get back
1b) alternatively, you can download it from the command line like this:
wget --content-disposition
'http://localhost:8080/wildfly-agent/download?installer=true
at this point, you have something like
"hawkular-wildfly-agent-installer-0.13.1.Final.jar" on your file system.
2) Run the installer jar, pointing it to the wildfly you want to install it to:
java -jar hawkular-wildfly-agent-installer-0.13.1.Final.jar
--wildfly-home=/path/to/your/wildfly/home
This installs the agent to your wildfly server.
That should be it. Run your wildfly and you've got it monitored by the agent.
Now, of course, there are lots of ways you can customize the agent installation. The above
just gets you the default agent with jdoe/password credentials assuming
http://localhost:8080 is accessible when you install.
Whatever properties that are accepted in the installer .properties file (which are also
the same cmdline options to the installer) you can pass to the download URL so they can be
preset for you in the installer's default configuration. So, for example, if you want
all of your agents to talk to "http://your-hawk-server:8080", you can do this to
get an installer that will install an agent talking to that server:
wget --content-disposition
'http://localhost:8080/wildfly-agent/download?installer=true&hawkular-server-url=http://your-hawk-server:8080'
There are other properties you can pass in if you want to further customize the installer
and the agent it installs. Just look at this for all that are available:
https://github.com/hawkular/hawkular-agent/blob/master/hawkular-wildfly-a...
In the future, we want to have the installer that you download preconfigured (if you want)
for the credentials of the user who requested the download, and preconfigured for the
server that you downloaded the installer from (right now, it defaults to
"http://localhost:8080" which is not optimal). But, again, you can customize
this now via installer cmdline options if you want:
java -jar hawkular-wildfly-agent-installer-0.13.1.Final.jar \
--wildfly-home=/path/to/your/wildfly/home \
--hawkular-server-url=http://your-server:8080 \
--hawkular-security-key=your-offline-token-key \
--hawkular-security-secret=your-offline-token-secret \
--subsystem-snippet=/path/to/my/custom/agent-subsystem.xml
That latter one (subsystem-snippet) is a powerful way you can further configure the agent
by giving a full .xml of the agent subsystem (so you can do things like define what
resource-type-dmr definitions you want, what metrics you want enabled or disabled, etc,
etc.)
4:15 a.m.
In the UI it seems that "WildFly Home" doesn't get filled on my machine
(Chrome, Fedora). It opens a dialog box to select a "Folder to upload" but
it doesn't fill in the input text.
Great to see progress there !
On Sat, Nov 14, 2015 at 12:09 AM, John Mazzitelli <mazz(a)redhat.com> wrote:
Jirka put together a small UI and enhanced the download servlet,
which I
then went in and enhanced further, so you can now get a wildfly agent
installer.
Here's quickly how it should work:
1) Go to the UI and fill in the fields, submit it, and you should be able
to save the installer jar you get back
1b) alternatively, you can download it from the command line like this:
wget --content-disposition '
http://localhost:8080/wildfly-agent/download?installer=true
at this point, you have something like
"hawkular-wildfly-agent-installer-0.13.1.Final.jar" on your file system.
2) Run the installer jar, pointing it to the wildfly you want to install
it to:
java -jar hawkular-wildfly-agent-installer-0.13.1.Final.jar
--wildfly-home=/path/to/your/wildfly/home
This installs the agent to your wildfly server.
That should be it. Run your wildfly and you've got it monitored by the
agent.
Now, of course, there are lots of ways you can customize the agent
installation. The above just gets you the default agent with jdoe/password
credentials assuming http://localhost:8080 is accessible when you install.
Whatever properties that are accepted in the installer .properties file
(which are also the same cmdline options to the installer) you can pass to
the download URL so they can be preset for you in the installer's default
configuration. So, for example, if you want all of your agents to talk to "
http://your-hawk-server:8080";, you can do this to get an installer that
will install an agent talking to that server:
wget --content-disposition '
http://localhost:8080/wildfly-agent/download?installer=true&hawkular-...
'
There are other properties you can pass in if you want to further
customize the installer and the agent it installs. Just look at this for
all that are available:
https://github.com/hawkular/hawkular-agent/blob/master/hawkular-wildfly-a...
In the future, we want to have the installer that you download
preconfigured (if you want) for the credentials of the user who requested
the download, and preconfigured for the server that you downloaded the
installer from (right now, it defaults to "http://localhost:8080" which
is not optimal). But, again, you can customize this now via installer
cmdline options if you want:
java -jar hawkular-wildfly-agent-installer-0.13.1.Final.jar \
--wildfly-home=/path/to/your/wildfly/home \
--hawkular-server-url=http://your-server:8080 \
--hawkular-security-key=your-offline-token-key \
--hawkular-security-secret=your-offline-token-secret \
--subsystem-snippet=/path/to/my/custom/agent-subsystem.xml
That latter one (subsystem-snippet) is a powerful way you can further
configure the agent by giving a full .xml of the agent subsystem (so you
can do things like define what resource-type-dmr definitions you want, what
metrics you want enabled or disabled, etc, etc.)
_______________________________________________
hawkular-dev mailing list
hawkular-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/hawkular-dev
4:58 a.m.
| In the UI it seems that "WildFly Home" doesn't get filled on my machine
I know, hopefully, I'll fix that today.
There is poor support for the file/directory choosers in angular :/
2Mazz:
Rather than pre-filling the credentials (username+password), it'd be better to do that
for the hawkular-security-key and hawkular-security-secret. I guess, they could be
obtained via the accounts' REST api.
In that case we can keep the ui as simple as possible and all the user needs to do is to
select the wildfly home.
jk
----- Original Message -----
| From: "Thomas Heute" <theute(a)redhat.com>
| To: "John Mazzitelli" <mazz(a)redhat.com>, "Discussions around
Hawkular development" <hawkular-dev(a)lists.jboss.org>
| Sent: Monday, 16 November, 2015 11:15:16 AM
| Subject: Re: [Hawkular-dev] you can now download a wildfly agent installer from kettle
|
| In the UI it seems that "WildFly Home" doesn't get filled on my machine
| (Chrome, Fedora). It opens a dialog box to select a "Folder to upload" but
| it doesn't fill in the input text.
|
| Great to see progress there !
|
| On Sat, Nov 14, 2015 at 12:09 AM, John Mazzitelli < mazz(a)redhat.com > wrote:
|
|
| Jirka put together a small UI and enhanced the download servlet, which I then
| went in and enhanced further, so you can now get a wildfly agent installer.
|
| Here's quickly how it should work:
|
| 1) Go to the UI and fill in the fields, submit it, and you should be able to
| save the installer jar you get back
| 1b) alternatively, you can download it from the command line like this:
| wget --content-disposition '
| http://localhost:8080/wildfly-agent/download?installer=true
|
| at this point, you have something like
| "hawkular-wildfly-agent-installer-0.13.1.Final.jar" on your file system.
|
| 2) Run the installer jar, pointing it to the wildfly you want to install it
| to:
|
| java -jar hawkular-wildfly-agent-installer-0.13.1.Final.jar
| --wildfly-home=/path/to/your/wildfly/home
|
| This installs the agent to your wildfly server.
|
| That should be it. Run your wildfly and you've got it monitored by the agent.
|
| Now, of course, there are lots of ways you can customize the agent
| installation. The above just gets you the default agent with jdoe/password
| credentials assuming http://localhost:8080 is accessible when you install.
|
| Whatever properties that are accepted in the installer .properties file
| (which are also the same cmdline options to the installer) you can pass to
| the download URL so they can be preset for you in the installer's default
| configuration. So, for example, if you want all of your agents to talk to "
| http://your-hawk-server:8080 ", you can do this to get an installer that
| will install an agent talking to that server:
|
| wget --content-disposition '
|
http://localhost:8080/wildfly-agent/download?installer=true&hawkular-...
| '
|
| There are other properties you can pass in if you want to further customize
| the installer and the agent it installs. Just look at this for all that are
| available:
|
|
https://github.com/hawkular/hawkular-agent/blob/master/hawkular-wildfly-a...
|
| In the future, we want to have the installer that you download preconfigured
| (if you want) for the credentials of the user who requested the download,
| and preconfigured for the server that you downloaded the installer from
| (right now, it defaults to " http://localhost:8080 " which is not optimal).
| But, again, you can customize this now via installer cmdline options if you
| want:
|
| java -jar hawkular-wildfly-agent-installer-0.13.1.Final.jar \
| --wildfly-home=/path/to/your/wildfly/home \
| --hawkular-server-url= http://your-server:8080 \
| --hawkular-security-key=your-offline-token-key \
| --hawkular-security-secret=your-offline-token-secret \
| --subsystem-snippet=/path/to/my/custom/agent-subsystem.xml
|
| That latter one (subsystem-snippet) is a powerful way you can further
| configure the agent by giving a full .xml of the agent subsystem (so you can
| do things like define what resource-type-dmr definitions you want, what
| metrics you want enabled or disabled, etc, etc.)
| _______________________________________________
| hawkular-dev mailing list
| hawkular-dev(a)lists.jboss.org
| https://lists.jboss.org/mailman/listinfo/hawkular-dev
|
|
|
|
| _______________________________________________
| hawkular-dev mailing list
| hawkular-dev(a)lists.jboss.org
| https://lists.jboss.org/mailman/listinfo/hawkular-dev
|
5:05 a.m.
On Mon, Nov 16, 2015 at 11:58 AM, Jiri Kremser <jkremser(a)redhat.com> wrote:
| In the UI it seems that "WildFly Home" doesn't get
filled on my machine
I know, hopefully, I'll fix that today.
There is poor support for the file/directory choosers in angular :/
2Mazz:
Rather than pre-filling the credentials (username+password), it'd be
better to do that for the hawkular-security-key and
hawkular-security-secret. I guess, they could be obtained via the accounts'
REST api.
In that case we can keep the ui as simple as possible and all the user
needs to do is to select the wildfly home.
Why do we need the WF Home ? Just for initial install ?
I can imagine that you would download the installer once for multiple WF
(but a single Hawkular server and same account), so that could (should ?)
be asked by the installer.
Thomas
jk
----- Original Message -----
| From: "Thomas Heute" <theute(a)redhat.com>
| To: "John Mazzitelli" <mazz(a)redhat.com>, "Discussions around
Hawkular
development" <hawkular-dev(a)lists.jboss.org>
| Sent: Monday, 16 November, 2015 11:15:16 AM
| Subject: Re: [Hawkular-dev] you can now download a wildfly agent
installer from kettle
|
| In the UI it seems that "WildFly Home" doesn't get filled on my machine
| (Chrome, Fedora). It opens a dialog box to select a "Folder to upload"
but
| it doesn't fill in the input text.
|
| Great to see progress there !
|
| On Sat, Nov 14, 2015 at 12:09 AM, John Mazzitelli < mazz(a)redhat.com >
wrote:
|
|
| Jirka put together a small UI and enhanced the download servlet, which I
then
| went in and enhanced further, so you can now get a wildfly agent
installer.
|
| Here's quickly how it should work:
|
| 1) Go to the UI and fill in the fields, submit it, and you should be
able to
| save the installer jar you get back
| 1b) alternatively, you can download it from the command line like this:
| wget --content-disposition '
| http://localhost:8080/wildfly-agent/download?installer=true
|
| at this point, you have something like
| "hawkular-wildfly-agent-installer-0.13.1.Final.jar" on your file system.
|
| 2) Run the installer jar, pointing it to the wildfly you want to install
it
| to:
|
| java -jar hawkular-wildfly-agent-installer-0.13.1.Final.jar
| --wildfly-home=/path/to/your/wildfly/home
|
| This installs the agent to your wildfly server.
|
| That should be it. Run your wildfly and you've got it monitored by the
agent.
|
| Now, of course, there are lots of ways you can customize the agent
| installation. The above just gets you the default agent with
jdoe/password
| credentials assuming http://localhost:8080 is accessible when you
install.
|
| Whatever properties that are accepted in the installer .properties file
| (which are also the same cmdline options to the installer) you can pass
to
| the download URL so they can be preset for you in the installer's default
| configuration. So, for example, if you want all of your agents to talk
to "
| http://your-hawk-server:8080 ", you can do this to get an installer that
| will install an agent talking to that server:
|
| wget --content-disposition '
|
http://localhost:8080/wildfly-agent/download?installer=true&hawkular-...
| '
|
| There are other properties you can pass in if you want to further
customize
| the installer and the agent it installs. Just look at this for all that
are
| available:
|
|
https://github.com/hawkular/hawkular-agent/blob/master/hawkular-wildfly-a...
|
| In the future, we want to have the installer that you download
preconfigured
| (if you want) for the credentials of the user who requested the download,
| and preconfigured for the server that you downloaded the installer from
| (right now, it defaults to " http://localhost:8080 " which is not
optimal).
| But, again, you can customize this now via installer cmdline options if
you
| want:
|
| java -jar hawkular-wildfly-agent-installer-0.13.1.Final.jar \
| --wildfly-home=/path/to/your/wildfly/home \
| --hawkular-server-url= http://your-server:8080 \
| --hawkular-security-key=your-offline-token-key \
| --hawkular-security-secret=your-offline-token-secret \
| --subsystem-snippet=/path/to/my/custom/agent-subsystem.xml
|
| That latter one (subsystem-snippet) is a powerful way you can further
| configure the agent by giving a full .xml of the agent subsystem (so you
can
| do things like define what resource-type-dmr definitions you want, what
| metrics you want enabled or disabled, etc, etc.)
| _______________________________________________
| hawkular-dev mailing list
| hawkular-dev(a)lists.jboss.org
| https://lists.jboss.org/mailman/listinfo/hawkular-dev
|
|
|
|
| _______________________________________________
| hawkular-dev mailing list
| hawkular-dev(a)lists.jboss.org
| https://lists.jboss.org/mailman/listinfo/hawkular-dev
|
_______________________________________________
hawkular-dev mailing list
hawkular-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/hawkular-dev
5:15 a.m.
| Why do we need the WF Home ? Just for initial install ?
yes
| I can imagine that you would download the installer once for multiple WF (but
| a single Hawkular server and same account), so that could (should ?) be
| asked by the installer.
right, interactive installer is another approach. Currently, you can actually reuse the
same jar and use the
--wildfly-home=/path/to/your/wildfly/home to change the path, not sure if the param takes
precedence before the property files though, Mazz can shed some light here.
ok, in that case, everything could be optional in the UI and if the wf-home is not filled
in the property files, nor passed as the param, the installer can ask in the bash. This
sounds good.
jk
----- Original Message -----
| From: "Thomas Heute" <theute(a)redhat.com>
| To: "Discussions around Hawkular development"
<hawkular-dev(a)lists.jboss.org>
| Sent: Monday, 16 November, 2015 12:05:56 PM
| Subject: Re: [Hawkular-dev] you can now download a wildfly agent installer from kettle
|
|
|
| On Mon, Nov 16, 2015 at 11:58 AM, Jiri Kremser < jkremser(a)redhat.com > wrote:
|
|
| | In the UI it seems that "WildFly Home" doesn't get filled on my machine
|
| I know, hopefully, I'll fix that today.
| There is poor support for the file/directory choosers in angular :/
|
| 2Mazz:
| Rather than pre-filling the credentials (username+password), it'd be better
| to do that for the hawkular-security-key and hawkular-security-secret. I
| guess, they could be obtained via the accounts' REST api.
|
| In that case we can keep the ui as simple as possible and all the user needs
| to do is to select the wildfly home.
|
| Why do we need the WF Home ? Just for initial install ?
|
| I can imagine that you would download the installer once for multiple WF (but
| a single Hawkular server and same account), so that could (should ?) be
| asked by the installer.
|
| Thomas
|
|
|
|
|
| jk
|
|
| ----- Original Message -----
| | From: "Thomas Heute" < theute(a)redhat.com >
| | To: "John Mazzitelli" < mazz(a)redhat.com >, "Discussions around
Hawkular
| | development" < hawkular-dev(a)lists.jboss.org >
| | Sent: Monday, 16 November, 2015 11:15:16 AM
| | Subject: Re: [Hawkular-dev] you can now download a wildfly agent installer
| | from kettle
| |
| | In the UI it seems that "WildFly Home" doesn't get filled on my machine
| | (Chrome, Fedora). It opens a dialog box to select a "Folder to upload" but
| | it doesn't fill in the input text.
| |
| | Great to see progress there !
| |
| | On Sat, Nov 14, 2015 at 12:09 AM, John Mazzitelli < mazz(a)redhat.com >
| | wrote:
| |
| |
| | Jirka put together a small UI and enhanced the download servlet, which I
| | then
| | went in and enhanced further, so you can now get a wildfly agent installer.
| |
| | Here's quickly how it should work:
| |
| | 1) Go to the UI and fill in the fields, submit it, and you should be able
| | to
| | save the installer jar you get back
| | 1b) alternatively, you can download it from the command line like this:
| | wget --content-disposition '
| | http://localhost:8080/wildfly-agent/download?installer=true
| |
| | at this point, you have something like
| | "hawkular-wildfly-agent-installer-0.13.1.Final.jar" on your file system.
| |
| | 2) Run the installer jar, pointing it to the wildfly you want to install it
| | to:
| |
| | java -jar hawkular-wildfly-agent-installer-0.13.1.Final.jar
| | --wildfly-home=/path/to/your/wildfly/home
| |
| | This installs the agent to your wildfly server.
| |
| | That should be it. Run your wildfly and you've got it monitored by the
| | agent.
| |
| | Now, of course, there are lots of ways you can customize the agent
| | installation. The above just gets you the default agent with jdoe/password
| | credentials assuming http://localhost:8080 is accessible when you install.
| |
| | Whatever properties that are accepted in the installer .properties file
| | (which are also the same cmdline options to the installer) you can pass to
| | the download URL so they can be preset for you in the installer's default
| | configuration. So, for example, if you want all of your agents to talk to "
| | http://your-hawk-server:8080 ", you can do this to get an installer that
| | will install an agent talking to that server:
| |
| | wget --content-disposition '
| |
http://localhost:8080/wildfly-agent/download?installer=true&hawkular-...
| | '
| |
| | There are other properties you can pass in if you want to further customize
| | the installer and the agent it installs. Just look at this for all that are
| | available:
| |
| |
https://github.com/hawkular/hawkular-agent/blob/master/hawkular-wildfly-a...
| |
| | In the future, we want to have the installer that you download
| | preconfigured
| | (if you want) for the credentials of the user who requested the download,
| | and preconfigured for the server that you downloaded the installer from
| | (right now, it defaults to " http://localhost:8080 " which is not optimal).
| | But, again, you can customize this now via installer cmdline options if you
| | want:
| |
| | java -jar hawkular-wildfly-agent-installer-0.13.1.Final.jar \
| | --wildfly-home=/path/to/your/wildfly/home \
| | --hawkular-server-url= http://your-server:8080 \
| | --hawkular-security-key=your-offline-token-key \
| | --hawkular-security-secret=your-offline-token-secret \
| | --subsystem-snippet=/path/to/my/custom/agent-subsystem.xml
| |
| | That latter one (subsystem-snippet) is a powerful way you can further
| | configure the agent by giving a full .xml of the agent subsystem (so you
| | can
| | do things like define what resource-type-dmr definitions you want, what
| | metrics you want enabled or disabled, etc, etc.)
| | _______________________________________________
| | hawkular-dev mailing list
| | hawkular-dev(a)lists.jboss.org
| | https://lists.jboss.org/mailman/listinfo/hawkular-dev
| |
| |
| |
| |
| | _______________________________________________
| | hawkular-dev mailing list
| | hawkular-dev(a)lists.jboss.org
| | https://lists.jboss.org/mailman/listinfo/hawkular-dev
| |
| _______________________________________________
| hawkular-dev mailing list
| hawkular-dev(a)lists.jboss.org
| https://lists.jboss.org/mailman/listinfo/hawkular-dev
|
|
|
|
| _______________________________________________
| hawkular-dev mailing list
| hawkular-dev(a)lists.jboss.org
| https://lists.jboss.org/mailman/listinfo/hawkular-dev
|
7:46 a.m.
right, interactive installer is another approach. Currently, you can
actually
reuse the same jar and use the
--wildfly-home=/path/to/your/wildfly/home to change the path, not sure if the
param takes precedence before the property files though, Mazz can shed some
light here.
Correct. The way the installer works is every setting you see in the .properties file can
be overridden by installer cmdline options (not just wildfly home).
ok, in that case, everything could be optional in the UI and if the wf-home
is not filled in the property files, nor passed as the param, the installer
can ask in the bash. This sounds good.
Right now if there is no wildfly home in the properties or as a cmdline option, the
installer fails.
Installer does not use Aesh. Sounds like we have to switch to using that before we go
further with installer commandline enhancements.
6:29 a.m.
I started some "spec" here:
https://docs.google.com/document/d/1Q2wFKlp_-cI8k56k7YURxbqAShQxDsSD5tusW...
please comment / edit
On Mon, Nov 16, 2015 at 2:46 PM, John Mazzitelli <mazz(a)redhat.com> wrote:
> right, interactive installer is another approach. Currently, you
can
actually
> reuse the same jar and use the
> --wildfly-home=/path/to/your/wildfly/home to change the path, not sure
if the
> param takes precedence before the property files though, Mazz can shed
some
> light here.
Correct. The way the installer works is every setting you see in the
.properties file can be overridden by installer cmdline options (not just
wildfly home).
>
> ok, in that case, everything could be optional in the UI and if the
wf-home
> is not filled in the property files, nor passed as the param, the
installer
> can ask in the bash. This sounds good.
Right now if there is no wildfly home in the properties or as a cmdline
option, the installer fails.
Installer does not use Aesh. Sounds like we have to switch to using that
before we go further with installer commandline enhancements.
_______________________________________________
hawkular-dev mailing list
hawkular-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/hawkular-dev
3303
days inactive
3307
days old
6 comments
3 participants
participants (3)
-
Jiri Kremser -
John Mazzitelli -
Thomas Heute