Author: nico.ben
Date: 2009-02-06 12:45:07 -0500 (Fri, 06 Feb 2009)
New Revision: 10017
Modified:
trunk/doc/Seam_Reference_Guide/it-IT/Configuration.po
trunk/doc/Seam_Reference_Guide/it-IT/Mail.po
trunk/doc/Seam_Reference_Guide/it-IT/Persistence.po
trunk/doc/Seam_Reference_Guide/it-IT/Remoting.po
Log:
JBSEAM-3767: Italian translation of Seam guide
Modified: trunk/doc/Seam_Reference_Guide/it-IT/Configuration.po
===================================================================
--- trunk/doc/Seam_Reference_Guide/it-IT/Configuration.po 2009-02-06 17:43:34 UTC (rev
10016)
+++ trunk/doc/Seam_Reference_Guide/it-IT/Configuration.po 2009-02-06 17:45:07 UTC (rev
10017)
@@ -6,7 +6,7 @@
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To:
http://bugs.kde.org\n"
"POT-Creation-Date: 2009-01-18 15:00+0000\n"
-"PO-Revision-Date: 2009-02-04 18:18+0100\n"
+"PO-Revision-Date: 2009-02-06 18:27+0100\n"
"Last-Translator: Nicola Benaglia <nico.benaz(a)gmail.com>\n"
"Language-Team: none\n"
"MIME-Version: 1.0\n"
@@ -85,7 +85,7 @@
#: Configuration.xml:25
#, no-c-format
msgid "In addition, Seam requires the following entry in your
<literal>web.xml</literal> file:"
-msgstr ""
+msgstr "In aggiunta, Seam richiede la seguente voce nel file
<literal>web.xml</literal>:"
#. Tag: programlisting
#: Configuration.xml:27
@@ -103,13 +103,13 @@
#: Configuration.xml:29
#, no-c-format
msgid "This listener is responsible for bootstrapping Seam, and for destroying
session and application contexts."
-msgstr ""
+msgstr "Questo listener è responsabile dell'avvio di Seam e della distruzione
dei contesti di sessione e di applicazione."
#. Tag: para
#: Configuration.xml:32
#, no-c-format
msgid "Some JSF implementations have a broken implementation of server-side state
saving that interferes with Seam's conversation propagation. If you have problems with
conversation propagation during form submissions, try switching to client-side state
saving. You'll need this in <literal>web.xml</literal>:"
-msgstr ""
+msgstr "Alcune implementazioni JSF hanno un'implementazione erronea della
conservazione dello stato lato server, che interferisce con la propagazione della
conversazione di Seam. Se si hanno problemi con la propagazione della conversazione
durante l'invio di form, si provi a cambiare impostanto la conservazione lato client.
Occorre impostare questo in <literal>web.xml</literal>:"
#. Tag: programlisting
#: Configuration.xml:36
@@ -129,7 +129,7 @@
#: Configuration.xml:38
#, no-c-format
msgid "There is a minor gray area in the JSF specification regarding the mutability
of view state values. Since Seam uses the JSF view state to back its PAGE scope this can
become an issue in some cases. If you're using server side state saving with the
JSF-RI and you want a PAGE scoped bean to keep its exact value for a given view of a page
you will need to specify the following context-param. Otherwise if a user uses the
\"back\" button a PAGE scoped component will have the latest value if it has
changed not the value of the \"back\" page. (see <ulink
url=\"https://javaserverfaces-spec-public.dev.java.net/issues/show_b...
Spec Issue </ulink> ). This setting is not enabled by default because of the
performance hit of serializing the JSF view with every request."
-msgstr ""
+msgstr "C'è una piccola parte grigia nella specifica JSF riguardante la
mutabilità dei valore dello stato della vista. Poiché Seam usa lo stato della vista JSF
per tornare allo scope PAGE, questo in alcuni casi può diventare un problema. Se si usa la
conservazione dello stato lato server con JSF-RI e si vuole che il bean con scope PAGE
mantenga l'esatto valore per una data vista di pagina, occorre specificare il seguente
parametro di contesto. Altrimenti se un utente usa il pulsante \"indietro\" un
componente con scope PAGE avrà l'ultimo valore se questo non è cambiato nella pagina
\"indietro\". (si veda <ulink
url=\"https://javaserverfaces-spec-public.dev.java.net/issues/show_b...
Spec Issue </ulink> ). Quest'impostazione non è abilitata di default a causa
della performance nella serializzazione della vista JSF ad ogni richiesta."
#. Tag: programlisting
#: Configuration.xml:52
@@ -155,7 +155,7 @@
#: Configuration.xml:58
#, no-c-format
msgid "If you want follow our advice and use Facelets instead of JSP, add the
following lines to <literal>faces-config.xml</literal>:"
-msgstr ""
+msgstr "Se si vuole seguire il consiglio ed usare Facelets invece di JSP, si
aggiungano le seguenti linee a <literal>faces-config.xml</literal>:"
#. Tag: programlisting
#: Configuration.xml:61
@@ -173,7 +173,7 @@
#: Configuration.xml:63
#, no-c-format
msgid "And the following lines to <literal>web.xml</literal>:"
-msgstr ""
+msgstr "E le seguenti linee a <literal>web.xml</literal>:"
#. Tag: programlisting
#: Configuration.xml:65
@@ -193,7 +193,7 @@
#: Configuration.xml:67
#, no-c-format
msgid "If you are using facelets in JBoss AS, you'll find that Facelets logging
is broken (the log messages don't make it to the server log). Seam provides a bridge
to fix this, to use it copy <literal>lib/interop/jboss-seam-jul.jar</literal>
to
<literal>$JBOSS_HOME/server/default/deploy/jboss-web.deployer/jsf-libs/</literal>
and include the <literal>jboss-seam-ui.jar</literal> in the
<literal>WEB-INF/lib</literal> of your application. The Facelets logging
catagories are itemized in the <ulink
url=\"https://facelets.dev.java.net/nonav/docs/dev/docbook.html#conf...
Developer Documentation</ulink>."
-msgstr ""
+msgstr "Se si usa facelets in JBoss AS, si noterà che il logging di Facelets è
guasto (i messaggi di log non appaiono nel log del server). Seam fornisce un modo per
sistemare questo problema, per usarlo si copi
<literal>lib/interop/jboss-seam-jul.jar</literal> in
<literal>$JBOSS_HOME/server/default/deploy/jboss-web.deployer/jsf-libs/</literal>
e si includa <literal>jboss-seam-ui.jar</literal> nel
<literal>WEB-INF/lib</literal> dell'applicazione. Le categorie di logging
di Facelets sono elencate nella <ulink
url=\"https://facelets.dev.java.net/nonav/docs/dev/docbook.html#conf...
per lo sviluppatore Facelets</ulink>."
#. Tag: title
#: Configuration.xml:81
@@ -295,7 +295,7 @@
#: Configuration.xml:125
#, no-c-format
msgid "<literal>disabled</literal> — Used to disable a built
in filter."
-msgstr ""
+msgstr "<literal>disabled</literal> — Usato per disabilitare
il filtro predefinito."
#. Tag: para
#: Configuration.xml:131
@@ -313,7 +313,7 @@
#: Configuration.xml:140
#, no-c-format
msgid "Exception handling"
-msgstr ""
+msgstr "Gestione delle eccezioni."
#. Tag: para
#: Configuration.xml:141
@@ -397,7 +397,7 @@
#: Configuration.xml:186
#, no-c-format
msgid "Multipart form submissions"
-msgstr ""
+msgstr "Invio di form multipart"
#. Tag: para
#: Configuration.xml:187
@@ -433,7 +433,7 @@
#: Configuration.xml:211
#, no-c-format
msgid "Character encoding"
-msgstr ""
+msgstr "Codifica dei caratteri"
#. Tag: para
#: Configuration.xml:212
@@ -464,7 +464,7 @@
#: Configuration.xml:221
#, no-c-format
msgid "<literal>encoding</literal> — The encoding to
use."
-msgstr ""
+msgstr "<literal>encoding</literal> — La codifica da
usare."
#. Tag: para
#: Configuration.xml:225
Modified: trunk/doc/Seam_Reference_Guide/it-IT/Mail.po
===================================================================
--- trunk/doc/Seam_Reference_Guide/it-IT/Mail.po 2009-02-06 17:43:34 UTC (rev 10016)
+++ trunk/doc/Seam_Reference_Guide/it-IT/Mail.po 2009-02-06 17:45:07 UTC (rev 10017)
@@ -6,7 +6,7 @@
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To:
http://bugs.kde.org\n"
"POT-Creation-Date: 2008-10-14 11:38+0000\n"
-"PO-Revision-Date: 2008-12-31 00:20+0100\n"
+"PO-Revision-Date: 2009-02-06 18:43+0100\n"
"Last-Translator: Nicola Benaglia <nico.benaz(a)gmail.com>\n"
"Language-Team: none\n"
"MIME-Version: 1.0\n"
@@ -23,25 +23,25 @@
#: Mail.xml:3
#, no-c-format
msgid "Seam now includes an optional components for templating and sending
emails."
-msgstr ""
+msgstr "Seam include ora dei componenti opzionali per modellare e spedire le
email."
#. Tag: para
#: Mail.xml:7
#, no-c-format
msgid "Email support is provided by
<literal>jboss-seam-mail.jar</literal>. This JAR contains the mail JSF
controls, which are used to construct emails, and the
<literal>mailSession</literal> manager component."
-msgstr ""
+msgstr "Il supporto email è fornito da
<literal>jboss-seam-mail.jar</literal>. Questo JAR contiene i controlli JSF
per la mail, che vengono impiegati per costruire le email, ed il componente manager
<literal>mailSession</literal>."
#. Tag: para
#: Mail.xml:13
#, no-c-format
msgid "The examples/mail project contains an example of the email support in action.
It demonstrates proper packaging, and it contains a number of example that demonstrate the
key features currently supported."
-msgstr ""
+msgstr "Il progetto examples/mail contiene un esempio di supporto email in azione.
Mostra un pacchetto idoneo e contiene esempi che mostrano le funzionalità chiave
attualmente supportate."
#. Tag: para
#: Mail.xml:19
#, no-c-format
msgid "You can also test your mail's using Seam's integration testing
environment. See <xref linkend=\"testing.mail\"/>."
-msgstr ""
+msgstr "Si può testare la propria mail usando l'ambiente di test di Seam. Si
veda <xref linkend=\"testing.mail\"/>."
#. Tag: title
#: Mail.xml:25
@@ -53,7 +53,7 @@
#: Mail.xml:27
#, no-c-format
msgid "You don't need to learn a whole new templating language to use Seam Mail
— an email is just facelet!"
-msgstr ""
+msgstr "Non occorre imparare un nuovo linguaggio di template per usare Seam Mail
— un'email è semplicemente un facelet!"
#. Tag: programlisting
#: Mail.xml:32
@@ -99,13 +99,13 @@
#: Mail.xml:34
#, no-c-format
msgid "The <literal><m:message></literal> tag wraps the
whole message, and tells Seam to start rendering an email. Inside the
<literal><m:message></literal> tag we use an
<literal><m:from></literal> tag to set who the message is from,
a <literal><m:to></literal> tag to specify a sender (notice how
we use EL as we would in a normal facelet), and a
<literal><m:subject></literal> tag."
-msgstr ""
+msgstr "Il tag <literal><m:message></literal> racchiude
l'intero messaggio e dice a Seam di iniziare a generare la mail. Dentro al tag
<literal><m:message></literal> si usa un tag
<literal><m:from></literal> per impostare il mittente, un tag
<literal><m:to></literal> per specificare un destinatario (si
noti che EL viene impiegato come in un facelet normale), e un tag
<literal><m:subject></literal>."
#. Tag: para
#: Mail.xml:43
#, no-c-format
msgid "The <literal><m:body></literal> tag wraps the body
of the email. You can use regular HTML tags inside the body as well as JSF
components."
-msgstr ""
+msgstr "Il tag <literal><m:body></literal> racchiude il
corpo della mail. Si possono usare tag HTML dentro il corpo così come componenti
JSF."
#. Tag: para
#: Mail.xml:48
@@ -773,19 +773,19 @@
#: Mail.xml:418
#, no-c-format
msgid "<literal>importance</literal> — low, normal or high. By
default normal, this sets the importance of the mail message."
-msgstr ""
+msgstr "<literal>importance</literal> — low, normal or high.
Di default è normal, questo imposta l'importanza del messaggio email."
#. Tag: para
#: Mail.xml:424
#, no-c-format
msgid "<literal>precedence</literal> — sets the precedence of
the message (e.g. bulk)."
-msgstr ""
+msgstr "<literal>precedence</literal> — imposta la precedenza
del messaggio (es. bulk)."
#. Tag: para
#: Mail.xml:430
#, no-c-format
msgid "<literal>requestReadReceipt</literal> — by default
false, if set, a read receipt request will be will be added, with the read receipt being
sent to the <literal>From:</literal> address."
-msgstr ""
+msgstr "<literal>requestReadReceipt</literal> — di default è
false, se impostato, verrà aggiunta un richiesta di conferma di lettura, da inviare
all'indirizzo <literal>From:</literal>."
#. Tag: para
#: Mail.xml:438
@@ -964,7 +964,7 @@
#: Mail.xml:630
#, no-c-format
msgid "If the value attribute is ommitted:"
-msgstr ""
+msgstr "Se viene omesso l'attributo value:"
#. Tag: para
#: Mail.xml:633
@@ -976,19 +976,19 @@
#: Mail.xml:641
#, no-c-format
msgid "If this tag contains other JSF tags a HTML document will be generated from
them and attached to the email. A <literal>fileName</literal> should be
specfied."
-msgstr ""
+msgstr "Se questo tag contiene altri tag JSF, da questi verrà generato un documento
HTML ed allegato alla mail. Un <literal>fileName</literal> dovrebbe sempre
essere specificato."
#. Tag: para
#: Mail.xml:650
#, no-c-format
msgid "<literal>fileName</literal> — Specify the file name to
use for the attached file."
-msgstr ""
+msgstr "<literal>fileName</literal> — Specifica il nome del
file da usare per il file allegato."
#. Tag: para
#: Mail.xml:656
#, no-c-format
msgid "<literal>contentType</literal> — Specify the MIME type
of the attached file"
-msgstr ""
+msgstr "<literal>contentType</literal> — Specifica il tipo
MIME del file allegato."
#. Tag: term
#: Mail.xml:665
@@ -1012,11 +1012,11 @@
#: Mail.xml:675
#, no-c-format
msgid "Set's the body for the email. Supports an
<literal>alternative</literal> facet which, if an HTML email is generated can
contain alternative text for a mail reader which doesn't support html."
-msgstr ""
+msgstr "Si imposti il corpo della mail. Supporta un facet
<literal>alternativo</literal> che, se viene generata una mail HTML, può
contenere testo alternativo per un lettore di email che non supporta HTML."
#. Tag: para
#: Mail.xml:682
#, no-c-format
msgid "<literal>type</literal> — If set to
<literal>plain</literal> then a plain text email will be generated otherwise
an HTML email is generated."
-msgstr ""
+msgstr "<literal>type</literal> — Se impostato a
<literal>plain</literal> allora verrà generata una mail con semplice testo,
altrimenti una mail HTML."
Modified: trunk/doc/Seam_Reference_Guide/it-IT/Persistence.po
===================================================================
--- trunk/doc/Seam_Reference_Guide/it-IT/Persistence.po 2009-02-06 17:43:34 UTC (rev
10016)
+++ trunk/doc/Seam_Reference_Guide/it-IT/Persistence.po 2009-02-06 17:45:07 UTC (rev
10017)
@@ -6,7 +6,7 @@
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To:
http://bugs.kde.org\n"
"POT-Creation-Date: 2009-01-18 15:00+0000\n"
-"PO-Revision-Date: 2008-12-30 12:24+0100\n"
+"PO-Revision-Date: 2009-02-06 18:44+0100\n"
"Last-Translator: Nicola Benaglia <nico.benaz(a)gmail.com>\n"
"Language-Team: none\n"
"MIME-Version: 1.0\n"
@@ -22,11 +22,7 @@
#. Tag: para
#: Persistence.xml:4
#, no-c-format
-msgid ""
-"Seam provides extensive support for the two most popular persistence "
-"architectures for Java: Hibernate3, and the Java Persistence API introduced "
-"with EJB 3.0. Seam's unique state-management architecture allows the most
"
-"sophisticated ORM integration of any web application framework."
+msgid "Seam provides extensive support for the two most popular persistence
architectures for Java: Hibernate3, and the Java Persistence API introduced with EJB 3.0.
Seam's unique state-management architecture allows the most sophisticated ORM
integration of any web application framework."
msgstr ""
#. Tag: title
@@ -38,75 +34,37 @@
#. Tag: para
#: Persistence.xml:15
#, no-c-format
-msgid ""
-"Seam grew out of the frustration of the Hibernate team with the "
-"statelessness typical of the previous generation of Java application "
-"architectures. The state management architecture of Seam was originally "
-"designed to solve problems relating to persistence — in particular
"
-"problems associated with <emphasis>optimistic transaction
processing</"
-"emphasis>. Scalable online applications always use optimistic transactions.
"
-"An atomic (database/JTA) level transaction should not span a user "
-"interaction unless the application is designed to support only a very small "
-"number of concurrent clients. But almost all interesting work involves first
"
-"displaying data to a user, and then, slightly later, updating the same data.
"
-"So Hibernate was designed to support the idea of a persistence context which
"
-"spanned an optimistic transaction."
+msgid "Seam grew out of the frustration of the Hibernate team with the statelessness
typical of the previous generation of Java application architectures. The state management
architecture of Seam was originally designed to solve problems relating to persistence
— in particular problems associated with <emphasis>optimistic transaction
processing</emphasis>. Scalable online applications always use optimistic
transactions. An atomic (database/JTA) level transaction should not span a user
interaction unless the application is designed to support only a very small number of
concurrent clients. But almost all interesting work involves first displaying data to a
user, and then, slightly later, updating the same data. So Hibernate was designed to
support the idea of a persistence context which spanned an optimistic transaction."
msgstr ""
#. Tag: para
#: Persistence.xml:30
#, no-c-format
-msgid ""
-"Unfortunately, the so-called \"stateless\" architectures that preceded
Seam "
-"and EJB 3.0 had no construct for representing an optimistic transaction. So,
"
-"instead, these architectures provided persistence contexts scoped to the "
-"atomic transaction. Of course, this resulted in many problems for users, and
"
-"is the cause of the number one user complaint about Hibernate: the dreaded "
-"<literal>LazyInitializationException</literal>. What we need is a
construct "
-"for representing an optimistic transaction in the application tier."
+msgid "Unfortunately, the so-called \"stateless\" architectures that
preceded Seam and EJB 3.0 had no construct for representing an optimistic transaction. So,
instead, these architectures provided persistence contexts scoped to the atomic
transaction. Of course, this resulted in many problems for users, and is the cause of the
number one user complaint about Hibernate: the dreaded
<literal>LazyInitializationException</literal>. What we need is a construct
for representing an optimistic transaction in the application tier."
msgstr ""
#. Tag: para
#: Persistence.xml:40
#, no-c-format
-msgid ""
-"EJB 3.0 recognizes this problem, and introduces the idea of a stateful "
-"component (a stateful session bean) with an <emphasis>extended persistence
"
-"context</emphasis> scoped to the lifetime of the component. This is a "
-"partial solution to the problem (and is a useful construct in and of itself)
"
-"however there are two problems:"
+msgid "EJB 3.0 recognizes this problem, and introduces the idea of a stateful
component (a stateful session bean) with an <emphasis>extended persistence
context</emphasis> scoped to the lifetime of the component. This is a partial
solution to the problem (and is a useful construct in and of itself) however there are two
problems:"
msgstr ""
#. Tag: para
#: Persistence.xml:50
#, no-c-format
-msgid ""
-"The lifecycle of the stateful session bean must be managed manually via code
"
-"in the web tier (it turns out that this is a subtle problem and much more "
-"difficult in practice than it sounds)."
+msgid "The lifecycle of the stateful session bean must be managed manually via code
in the web tier (it turns out that this is a subtle problem and much more difficult in
practice than it sounds)."
msgstr ""
#. Tag: para
#: Persistence.xml:57
#, no-c-format
-msgid ""
-"Propagation of the persistence context between stateful components in the "
-"same optimistic transaction is possible, but tricky."
+msgid "Propagation of the persistence context between stateful components in the
same optimistic transaction is possible, but tricky."
msgstr ""
#. Tag: para
#: Persistence.xml:64
#, no-c-format
-msgid ""
-"Seam solves the first problem by providing conversations, and stateful "
-"session bean components scoped to the conversation. (Most conversations "
-"actually represent optimistic transactions in the data layer.) This is "
-"sufficient for many simple applications (such as the Seam booking demo) "
-"where persistence context propagation is not needed. For more complex "
-"applications, with many loosly-interacting components in each conversation, "
-"propagation of the persistence context across components becomes an "
-"important issue. So Seam extends the persistence context management model of
"
-"EJB 3.0, to provide conversation-scoped extended persistence contexts."
+msgid "Seam solves the first problem by providing conversations, and stateful
session bean components scoped to the conversation. (Most conversations actually represent
optimistic transactions in the data layer.) This is sufficient for many simple
applications (such as the Seam booking demo) where persistence context propagation is not
needed. For more complex applications, with many loosly-interacting components in each
conversation, propagation of the persistence context across components becomes an
important issue. So Seam extends the persistence context management model of EJB 3.0, to
provide conversation-scoped extended persistence contexts."
msgstr ""
#. Tag: title
@@ -118,33 +76,19 @@
#. Tag: para
#: Persistence.xml:81
#, no-c-format
-msgid ""
-"EJB session beans feature declarative transaction management. The EJB "
-"container is able to start a transaction transparently when the bean is "
-"invoked, and end it when the invocation ends. If we write a session bean "
-"method that acts as a JSF action listener, we can do all the work associated
"
-"with that action in one transaction, and be sure that it is committed or "
-"rolled back when we finish processing the action. This is a great feature, "
-"and all that is needed by some Seam applications."
+msgid "EJB session beans feature declarative transaction management. The EJB
container is able to start a transaction transparently when the bean is invoked, and end
it when the invocation ends. If we write a session bean method that acts as a JSF action
listener, we can do all the work associated with that action in one transaction, and be
sure that it is committed or rolled back when we finish processing the action. This is a
great feature, and all that is needed by some Seam applications."
msgstr ""
#. Tag: para
#: Persistence.xml:90
#, no-c-format
-msgid ""
-"However, there is a problem with this approach. A Seam application may not "
-"perform all data access for a request from a single method call to a session
"
-"bean."
+msgid "However, there is a problem with this approach. A Seam application may not
perform all data access for a request from a single method call to a session bean."
msgstr ""
#. Tag: para
#: Persistence.xml:97
#, no-c-format
-msgid ""
-"The request might require processing by several loosly-coupled components, "
-"each of which is called independently from the web layer. It is common to "
-"see several or even many calls per request from the web layer to EJB "
-"components in Seam."
+msgid "The request might require processing by several loosly-coupled components,
each of which is called independently from the web layer. It is common to see several or
even many calls per request from the web layer to EJB components in Seam."
msgstr ""
#. Tag: para
@@ -156,86 +100,49 @@
#. Tag: para
#: Persistence.xml:110
#, no-c-format
-msgid ""
-"The more transactions per request, the more likely we are to encounter "
-"atomicity and isolation problems when our application is processing many "
-"concurrent requests. Certainly, all write operations should occur in the "
-"same transaction!"
+msgid "The more transactions per request, the more likely we are to encounter
atomicity and isolation problems when our application is processing many concurrent
requests. Certainly, all write operations should occur in the same transaction!"
msgstr ""
#. Tag: para
#: Persistence.xml:116
#, no-c-format
-msgid ""
-"Hibernate users developed the <emphasis>\"open session in
view\"</emphasis> "
-"pattern to work around this problem. In the Hibernate community, \"open
"
-"session in view\" was historically even more important because frameworks
"
-"like Spring use transaction-scoped persistence contexts. So rendering the "
-"view would cause <literal>LazyInitializationException</literal>s when
"
-"unfetched associations were accessed."
+msgid "Hibernate users developed the <emphasis>\"open session in
view\"</emphasis> pattern to work around this problem. In the Hibernate
community, \"open session in view\" was historically even more important because
frameworks like Spring use transaction-scoped persistence contexts. So rendering the view
would cause <literal>LazyInitializationException</literal>s when unfetched
associations were accessed."
msgstr ""
#. Tag: para
#: Persistence.xml:124
#, no-c-format
-msgid ""
-"This pattern is usually implemented as a single transaction which spans the "
-"entire request. There are several problems with this implementation, the "
-"most serious being that we can never be sure that a transaction is "
-"successful until we commit it — but by the time the \"open session
in "
-"view\" transaction is committed, the view is fully rendered, and the "
-"rendered response may already have been flushed to the client. How can we "
-"notify the user that their transaction was unsuccessful?"
+msgid "This pattern is usually implemented as a single transaction which spans the
entire request. There are several problems with this implementation, the most serious
being that we can never be sure that a transaction is successful until we commit it
— but by the time the \"open session in view\" transaction is
committed, the view is fully rendered, and the rendered response may already have been
flushed to the client. How can we notify the user that their transaction was
unsuccessful?"
msgstr ""
#. Tag: para
#: Persistence.xml:133
#, no-c-format
-msgid ""
-"Seam solves both the transaction isolation problem and the association "
-"fetching problem, while working around the problems with \"open session in
"
-"view\". The solution comes in two parts:"
+msgid "Seam solves both the transaction isolation problem and the association
fetching problem, while working around the problems with \"open session in
view\". The solution comes in two parts:"
msgstr ""
#. Tag: para
#: Persistence.xml:141
#, no-c-format
-msgid ""
-"use an extended persistence context that is scoped to the conversation, "
-"instead of to the transaction"
+msgid "use an extended persistence context that is scoped to the conversation,
instead of to the transaction"
msgstr ""
#. Tag: para
#: Persistence.xml:147
#, no-c-format
-msgid ""
-"use two transactions per request; the first spans the beginning of the "
-"restore view phase (some transaction managers begin the transaction later at
"
-"the beginning of the apply request vaues phase) until the end of the invoke "
-"application phase; the second spans the render response phase"
+msgid "use two transactions per request; the first spans the beginning of the
restore view phase (some transaction managers begin the transaction later at the beginning
of the apply request vaues phase) until the end of the invoke application phase; the
second spans the render response phase"
msgstr ""
#. Tag: para
#: Persistence.xml:156
#, no-c-format
-msgid ""
-"In the next section, we'll tell you how to set up a conversation-scope "
-"persistence context. But first we need to tell you how to enable Seam "
-"transaction management. Note that you can use conversation-scoped "
-"persistence contexts without Seam transaction management, and there are good
"
-"reasons to use Seam transaction management even when you're not using
Seam-"
-"managed persistence contexts. However, the two facilities were designed to "
-"work together, and work best when used together."
+msgid "In the next section, we'll tell you how to set up a conversation-scope
persistence context. But first we need to tell you how to enable Seam transaction
management. Note that you can use conversation-scoped persistence contexts without Seam
transaction management, and there are good reasons to use Seam transaction management even
when you're not using Seam-managed persistence contexts. However, the two facilities
were designed to work together, and work best when used together."
msgstr ""
#. Tag: para
#: Persistence.xml:165
#, no-c-format
-msgid ""
-"Seam transaction management is useful even if you're using EJB 3.0
container-"
-"managed persistence contexts. But it is especially useful if you use Seam "
-"outside a Java EE 5 environment, or in any other case where you would use a "
-"Seam-managed persistence context."
+msgid "Seam transaction management is useful even if you're using EJB 3.0
container-managed persistence contexts. But it is especially useful if you use Seam
outside a Java EE 5 environment, or in any other case where you would use a Seam-managed
persistence context."
msgstr ""
#. Tag: title
@@ -247,10 +154,7 @@
#. Tag: para
#: Persistence.xml:175
#, no-c-format
-msgid ""
-"Seam transaction management is enabled by default for all JSF requests. If "
-"you want to <emphasis>disable</emphasis> this feature, you can do it in
"
-"<literal>components.xml</literal>:"
+msgid "Seam transaction management is enabled by default for all JSF requests. If
you want to <emphasis>disable</emphasis> this feature, you can do it in
<literal>components.xml</literal>:"
msgstr ""
#. Tag: programlisting
@@ -274,13 +178,7 @@
#. Tag: para
#: Persistence.xml:188
#, no-c-format
-msgid ""
-"Seam provides a transaction management abstraction for beginning, "
-"committing, rolling back, and synchronizing with a transaction. By default "
-"Seam uses a JTA transaction component that integrates with Container Managed
"
-"and programmatic EJB transactions. If you are working in a Java EE 5 "
-"environment, you should install the EJB synchronization component in "
-"<literal>components.xml</literal>:"
+msgid "Seam provides a transaction management abstraction for beginning, committing,
rolling back, and synchronizing with a transaction. By default Seam uses a JTA transaction
component that integrates with Container Managed and programmatic EJB transactions. If you
are working in a Java EE 5 environment, you should install the EJB synchronization
component in <literal>components.xml</literal>:"
msgstr ""
#. Tag: programlisting
@@ -292,40 +190,25 @@
#. Tag: para
#: Persistence.xml:197
#, no-c-format
-msgid ""
-"However, if you are working in a non EE 5 container, Seam will try auto "
-"detect the transaction synchronization mechanism to use. However, if Seam is
"
-"unable to detect the correct transaction synchronization to use, you may "
-"find you need configure one of the following:"
+msgid "However, if you are working in a non EE 5 container, Seam will try auto
detect the transaction synchronization mechanism to use. However, if Seam is unable to
detect the correct transaction synchronization to use, you may find you need configure one
of the following:"
msgstr ""
#. Tag: para
#: Persistence.xml:204
#, no-c-format
-msgid ""
-"JPA RESOURCE_LOCAL transactions with the <literal>javax.persistence."
-"EntityTransaction</literal> interface.
<literal>EntityTransaction</literal> "
-"begins the transaction at the beginning of the apply request values phase."
+msgid "JPA RESOURCE_LOCAL transactions with the
<literal>javax.persistence.EntityTransaction</literal> interface.
<literal>EntityTransaction</literal> begins the transaction at the beginning
of the apply request values phase."
msgstr ""
#. Tag: para
#: Persistence.xml:212
#, no-c-format
-msgid ""
-"Hibernate managed transactions with the
<literal>org.hibernate.Transaction</"
-"literal> interface. <literal>HibernateTransaction</literal> begins
the "
-"transaction at the beginning of the apply request values phase."
+msgid "Hibernate managed transactions with the
<literal>org.hibernate.Transaction</literal> interface.
<literal>HibernateTransaction</literal> begins the transaction at the
beginning of the apply request values phase."
msgstr ""
#. Tag: para
#: Persistence.xml:220
#, no-c-format
-msgid ""
-"Spring managed transactions with the <literal>org.springframework."
-"transaction.PlatformTransactionManager</literal> interface. The Spring
"
-"<literal>PlatformTransactionManagement</literal> manager may begin the
"
-"transaction at the beginning of the apply request values phase if the "
-"<literal>userConversationContext</literal> attribute is set."
+msgid "Spring managed transactions with the
<literal>org.springframework.transaction.PlatformTransactionManager</literal>
interface. The Spring <literal>PlatformTransactionManagement</literal> manager
may begin the transaction at the beginning of the apply request values phase if the
<literal>userConversationContext</literal> attribute is set."
msgstr ""
#. Tag: para
@@ -337,14 +220,7 @@
#. Tag: para
#: Persistence.xml:234
#, no-c-format
-msgid ""
-"Configure JPA RESOURCE_LOCAL transaction management by adding the following "
-"to your components.xml where <literal>#{em}</literal> is the name of
the "
-"<literal>persistence:managed-persistence-context</literal> component.
If "
-"your managed persistence context is named
<literal>entityManager</literal>, "
-"you can opt to leave out the <literal>entity-manager</literal>
attribute. "
-"(see <link
linkend=\"persistence.seam-managed-persistence-contexts\">Seam-"
-"managed persistence contexts</link> )"
+msgid "Configure JPA RESOURCE_LOCAL transaction management by adding the following
to your components.xml where <literal>#{em}</literal> is the name of the
<literal>persistence:managed-persistence-context</literal> component. If your
managed persistence context is named <literal>entityManager</literal>, you can
opt to leave out the <literal>entity-manager</literal> attribute. (see
<link
linkend=\"persistence.seam-managed-persistence-contexts\">Seam-managed
persistence contexts</link> )"
msgstr ""
#. Tag: programlisting
@@ -356,32 +232,19 @@
#. Tag: para
#: Persistence.xml:245
#, no-c-format
-msgid ""
-"To configure Hibernate managed transactions declare the following in your "
-"components.xml where <literal>#{hibernateSession}</literal> is the name
of "
-"the project's
<literal>persistence:managed-hibernate-session</literal> "
-"component. If your managed hibernate session is named
<literal>session</"
-"literal>, you can opt to leave out the <literal>session</literal>
attribute. "
-"(see <link
linkend=\"persistence.seam-managed-persistence-contexts\">Seam-"
-"managed persistence contexts</link> )"
+msgid "To configure Hibernate managed transactions declare the following in your
components.xml where <literal>#{hibernateSession}</literal> is the name of the
project's <literal>persistence:managed-hibernate-session</literal>
component. If your managed hibernate session is named
<literal>session</literal>, you can opt to leave out the
<literal>session</literal> attribute. (see <link
linkend=\"persistence.seam-managed-persistence-contexts\">Seam-managed
persistence contexts</link> )"
msgstr ""
#. Tag: programlisting
#: Persistence.xml:255
#, no-c-format
-msgid ""
-"<![CDATA[<transaction:hibernate-transaction
session=\"#{hibernateSession}\"/"
-">]]>"
-msgstr ""
-"<![CDATA[<transaction:hibernate-transaction
session=\"#{hibernateSession}\"/"
-">]]>"
+msgid "<![CDATA[<transaction:hibernate-transaction
session=\"#{hibernateSession}\"/>]]>"
+msgstr "<![CDATA[<transaction:hibernate-transaction
session=\"#{hibernateSession}\"/>]]>"
#. Tag: para
#: Persistence.xml:256
#, no-c-format
-msgid ""
-"To explicitly disable Seam managed transactions declare the following in "
-"your components.xml:"
+msgid "To explicitly disable Seam managed transactions declare the following in your
components.xml:"
msgstr ""
#. Tag: programlisting
@@ -393,9 +256,7 @@
#. Tag: para
#: Persistence.xml:260
#, no-c-format
-msgid ""
-"For configuring Spring managed transactions see <link
linkend=\"spring-"
-"transactions\">using Spring PlatformTransactionManagement</link>
."
+msgid "For configuring Spring managed transactions see <link
linkend=\"spring-transactions\">using Spring
PlatformTransactionManagement</link> ."
msgstr ""
#. Tag: title
@@ -407,17 +268,7 @@
#. Tag: para
#: Persistence.xml:269
#, no-c-format
-msgid ""
-"Transaction synchronization provides callbacks for transaction related "
-"events such as <literal>beforeCompletion()</literal> and "
-"<literal>afterCompletion()</literal>. By default, Seam uses it's
own "
-"transaction synchronization component which requires explicit use of the "
-"Seam transaction component when committing a transaction to ensure "
-"synchronization callbacks are correctly executed. If in a Java EE 5 "
-"environment the
<literal><transaction:ejb-transaction/></literal> "
-"component should be be declared in <literal>components.xml</literal> to
"
-"ensure that Seam synchronization callbacks are correctly called if the "
-"container commits a transaction outside of Seam's knowledge."
+msgid "Transaction synchronization provides callbacks for transaction related events
such as <literal>beforeCompletion()</literal> and
<literal>afterCompletion()</literal>. By default, Seam uses it's own
transaction synchronization component which requires explicit use of the Seam transaction
component when committing a transaction to ensure synchronization callbacks are correctly
executed. If in a Java EE 5 environment the
<literal><transaction:ejb-transaction/></literal> component
should be be declared in <literal>components.xml</literal> to ensure that Seam
synchronization callbacks are correctly called if the container commits a transaction
outside of Seam's knowledge."
msgstr ""
#. Tag: title
@@ -429,38 +280,19 @@
#. Tag: para
#: Persistence.xml:285
#, no-c-format
-msgid ""
-"If you're using Seam outside of a Java EE 5 environment, you can't rely
upon "
-"the container to manage the persistence context lifecycle for you. Even if "
-"you are in an EE 5 environment, you might have a complex application with "
-"many loosly coupled components that collaborate together in the scope of a "
-"single conversation, and in this case you might find that propagation of the
"
-"persistence context between component is tricky and error-prone."
+msgid "If you're using Seam outside of a Java EE 5 environment, you can't
rely upon the container to manage the persistence context lifecycle for you. Even if you
are in an EE 5 environment, you might have a complex application with many loosly coupled
components that collaborate together in the scope of a single conversation, and in this
case you might find that propagation of the persistence context between component is
tricky and error-prone."
msgstr ""
#. Tag: para
#: Persistence.xml:294
#, no-c-format
-msgid ""
-"In either case, you'll need to use a <emphasis>managed persistence
context</"
-"emphasis> (for JPA) or a <emphasis>managed session</emphasis> (for
"
-"Hibernate) in your components. A Seam-managed persistence context is just a "
-"built-in Seam component that manages an instance of
<literal>EntityManager</"
-"literal> or <literal>Session</literal> in the conversation context.
You can "
-"inject it with <literal>(a)In</literal>."
+msgid "In either case, you'll need to use a <emphasis>managed persistence
context</emphasis> (for JPA) or a <emphasis>managed session</emphasis>
(for Hibernate) in your components. A Seam-managed persistence context is just a built-in
Seam component that manages an instance of <literal>EntityManager</literal> or
<literal>Session</literal> in the conversation context. You can inject it with
<literal>(a)In</literal>."
msgstr ""
#. Tag: para
#: Persistence.xml:302
#, no-c-format
-msgid ""
-"Seam-managed persistence contexts are extremely efficient in a clustered "
-"environment. Seam is able to perform an optimization that EJB 3.0 "
-"specification does not allow containers to use for container-managed "
-"extended persistence contexts. Seam supports transparent failover of "
-"extended persisence contexts, without the need to replicate any persistence "
-"context state between nodes. (We hope to fix this oversight in the next "
-"revision of the EJB spec.)"
+msgid "Seam-managed persistence contexts are extremely efficient in a clustered
environment. Seam is able to perform an optimization that EJB 3.0 specification does not
allow containers to use for container-managed extended persistence contexts. Seam supports
transparent failover of extended persisence contexts, without the need to replicate any
persistence context state between nodes. (We hope to fix this oversight in the next
revision of the EJB spec.)"
msgstr ""
#. Tag: title
@@ -472,9 +304,7 @@
#. Tag: para
#: Persistence.xml:314
#, no-c-format
-msgid ""
-"Configuring a managed persistence context is easy. In
<literal>components."
-"xml</literal>, we can write:"
+msgid "Configuring a managed persistence context is easy. In
<literal>components.xml</literal>, we can write:"
msgstr ""
#. Tag: programlisting
@@ -483,33 +313,22 @@
msgid ""
"<![CDATA[<persistence:managed-persistence-context
name=\"bookingDatabase\" \n"
" auto-create=\"true\"\n"
-"
persistence-unit-jndi-name=\"java:/EntityManagerFactories/"
-"bookingData\"/>]]>"
+"
persistence-unit-jndi-name=\"java:/EntityManagerFactories/bookingData\"/>]]>"
msgstr ""
"<![CDATA[<persistence:managed-persistence-context
name=\"bookingDatabase\" \n"
" auto-create=\"true\"\n"
-"
persistence-unit-jndi-name=\"java:/EntityManagerFactories/"
-"bookingData\"/>]]>"
+"
persistence-unit-jndi-name=\"java:/EntityManagerFactories/bookingData\"/>]]>"
#. Tag: para
#: Persistence.xml:321
#, no-c-format
-msgid ""
-"This configuration creates a conversation-scoped Seam component named "
-"<literal>bookingDatabase</literal> that manages the lifecycle of
"
-"<literal>EntityManager</literal> instances for the persistence unit
"
-"(<literal>EntityManagerFactory</literal> instance) with JNDI name
"
-"<literal>java:/EntityManagerFactories/bookingData</literal>."
+msgid "This configuration creates a conversation-scoped Seam component named
<literal>bookingDatabase</literal> that manages the lifecycle of
<literal>EntityManager</literal> instances for the persistence unit
(<literal>EntityManagerFactory</literal> instance) with JNDI name
<literal>java:/EntityManagerFactories/bookingData</literal>."
msgstr ""
#. Tag: para
#: Persistence.xml:328
#, no-c-format
-msgid ""
-"Of course, you need to make sure that you have bound the "
-"<literal>EntityManagerFactory</literal> into JNDI. In JBoss, you can do
this "
-"by adding the following property setting to
<literal>persistence.xml</"
-"literal>."
+msgid "Of course, you need to make sure that you have bound the
<literal>EntityManagerFactory</literal> into JNDI. In JBoss, you can do this
by adding the following property setting to
<literal>persistence.xml</literal>."
msgstr ""
#. Tag: programlisting
@@ -537,15 +356,7 @@
#. Tag: para
#: Persistence.xml:342
#, no-c-format
-msgid ""
-"If you are using EJB3 and mark your class or method "
-"<literal>@TransactionAttribute(REQUIRES_NEW)</literal> then the
transaction "
-"and persistence context shouldn't be propagated to method calls on this "
-"object. However as the Seam-managed persistence context is propagated to any
"
-"component within the conversation, it will be propagated to methods marked "
-"<literal>REQUIRES_NEW</literal>. Therefore, if you mark a method
"
-"<literal>REQUIRES_NEW</literal> then you should access the entity
manager "
-"using @PersistenceContext."
+msgid "If you are using EJB3 and mark your class or method
<literal>@TransactionAttribute(REQUIRES_NEW)</literal> then the transaction
and persistence context shouldn't be propagated to method calls on this object.
However as the Seam-managed persistence context is propagated to any component within the
conversation, it will be propagated to methods marked
<literal>REQUIRES_NEW</literal>. Therefore, if you mark a method
<literal>REQUIRES_NEW</literal> then you should access the entity manager
using @PersistenceContext."
msgstr ""
#. Tag: title
@@ -557,37 +368,29 @@
#. Tag: para
#: Persistence.xml:358
#, no-c-format
-msgid ""
-"Seam-managed Hibernate sessions are similar. In
<literal>components.xml</"
-"literal>:"
+msgid "Seam-managed Hibernate sessions are similar. In
<literal>components.xml</literal>:"
msgstr ""
#. Tag: programlisting
#: Persistence.xml:362
#, no-c-format
msgid ""
-"<![CDATA[<persistence:hibernate-session-factory name="
-"\"hibernateSessionFactory\"/>\n"
+"<![CDATA[<persistence:hibernate-session-factory
name=\"hibernateSessionFactory\"/>\n"
"\n"
"<persistence:managed-hibernate-session name=\"bookingDatabase\"
\n"
" auto-create=\"true\"\n"
-"
session-factory-jndi-name=\"java:/bookingSessionFactory\"/"
-">]]>"
+"
session-factory-jndi-name=\"java:/bookingSessionFactory\"/>]]>"
msgstr ""
-"<![CDATA[<persistence:hibernate-session-factory name="
-"\"hibernateSessionFactory\"/>\n"
+"<![CDATA[<persistence:hibernate-session-factory
name=\"hibernateSessionFactory\"/>\n"
"\n"
"<persistence:managed-hibernate-session name=\"bookingDatabase\"
\n"
" auto-create=\"true\"\n"
-"
session-factory-jndi-name=\"java:/bookingSessionFactory\"/"
-">]]>"
+"
session-factory-jndi-name=\"java:/bookingSessionFactory\"/>]]>"
#. Tag: para
#: Persistence.xml:364
#, no-c-format
-msgid ""
-"Where <literal>java:/bookingSessionFactory</literal> is the name of the
"
-"session factory specified in
<literal>hibernate.cfg.xml</literal>."
+msgid "Where <literal>java:/bookingSessionFactory</literal> is the name
of the session factory specified in
<literal>hibernate.cfg.xml</literal>."
msgstr ""
#. Tag: programlisting
@@ -597,42 +400,31 @@
"<![CDATA[<session-factory
name=\"java:/bookingSessionFactory\">\n"
" <property
name=\"transaction.flush_before_completion\">true</property>\n"
" <property
name=\"connection.release_mode\">after_statement</property>\n"
-" <property
name=\"transaction.manager_lookup_class\">org.hibernate."
-"transaction.JBossTransactionManagerLookup</property>\n"
-" <property
name=\"transaction.factory_class\">org.hibernate.transaction."
-"JTATransactionFactory</property>\n"
-" <property
name=\"connection.datasource\">java:/bookingDatasource</"
-"property>\n"
+" <property
name=\"transaction.manager_lookup_class\">org.hibernate.transaction.JBossTransactionManagerLookup</property>\n"
+" <property
name=\"transaction.factory_class\">org.hibernate.transaction.JTATransactionFactory</property>\n"
+" <property
name=\"connection.datasource\">java:/bookingDatasource</property>\n"
" ...\n"
"</session-factory>]]>"
msgstr ""
"<![CDATA[<session-factory
name=\"java:/bookingSessionFactory\">\n"
" <property
name=\"transaction.flush_before_completion\">true</property>\n"
" <property
name=\"connection.release_mode\">after_statement</property>\n"
-" <property
name=\"transaction.manager_lookup_class\">org.hibernate."
-"transaction.JBossTransactionManagerLookup</property>\n"
-" <property
name=\"transaction.factory_class\">org.hibernate.transaction."
-"JTATransactionFactory</property>\n"
-" <property
name=\"connection.datasource\">java:/bookingDatasource</"
-"property>\n"
+" <property
name=\"transaction.manager_lookup_class\">org.hibernate.transaction.JBossTransactionManagerLookup</property>\n"
+" <property
name=\"transaction.factory_class\">org.hibernate.transaction.JTATransactionFactory</property>\n"
+" <property
name=\"connection.datasource\">java:/bookingDatasource</property>\n"
" ...\n"
"</session-factory>]]>"
#. Tag: para
#: Persistence.xml:371
#, no-c-format
-msgid ""
-"Note that Seam does not flush the session, so you should always enable "
-"<literal>hibernate.transaction.flush_before_completion</literal> to
ensure "
-"that the session is automatically flushed before the JTA transaction
commits."
+msgid "Note that Seam does not flush the session, so you should always enable
<literal>hibernate.transaction.flush_before_completion</literal> to ensure
that the session is automatically flushed before the JTA transaction commits."
msgstr ""
#. Tag: para
#: Persistence.xml:378
#, no-c-format
-msgid ""
-"We can now have a managed Hibernate <literal>Session</literal> injected
into "
-"our JavaBean components using the following code:"
+msgid "We can now have a managed Hibernate <literal>Session</literal>
injected into our JavaBean components using the following code:"
msgstr ""
#. Tag: programlisting
@@ -650,51 +442,25 @@
#. Tag: para
#: Persistence.xml:389
#, no-c-format
-msgid ""
-"Persistence contexts scoped to the conversation allows you to program "
-"optimistic transactions that span multiple requests to the server without "
-"the need to use the <literal>merge()</literal> operation , without the
need "
-"to re-load data at the beginning of each request, and without the need to "
-"wrestle with the <literal>LazyInitializationException</literal> or
"
-"<literal>NonUniqueObjectException</literal>."
+msgid "Persistence contexts scoped to the conversation allows you to program
optimistic transactions that span multiple requests to the server without the need to use
the <literal>merge()</literal> operation , without the need to re-load data at
the beginning of each request, and without the need to wrestle with the
<literal>LazyInitializationException</literal> or
<literal>NonUniqueObjectException</literal>."
msgstr ""
#. Tag: para
#: Persistence.xml:398
#, no-c-format
-msgid ""
-"As with any optimistic transaction management, transaction isolation and "
-"consistency can be achieved via use of optimistic locking. Fortunately, both
"
-"Hibernate and EJB 3.0 make it very easy to use optimistic locking, by "
-"providing the <literal>@Version</literal> annotation."
+msgid "As with any optimistic transaction management, transaction isolation and
consistency can be achieved via use of optimistic locking. Fortunately, both Hibernate and
EJB 3.0 make it very easy to use optimistic locking, by providing the
<literal>@Version</literal> annotation."
msgstr ""
#. Tag: para
#: Persistence.xml:405
#, no-c-format
-msgid ""
-"By default, the persistence context is flushed (synchronized with the "
-"database) at the end of each transaction. This is sometimes the desired "
-"behavior. But very often, we would prefer that all changes are held in "
-"memory and only written to the database when the conversation ends "
-"successfully. This allows for truly atomic conversations. As the result of a
"
-"truly stupid and shortsighted decision by certain non-JBoss, non-Sun and
non-"
-"Sybase members of the EJB 3.0 expert group, there is currently no simple, "
-"usable and portable way to implement atomic conversations using EJB 3.0 "
-"persistence. However, Hibernate provides this feature as a vendor extension "
-"to the <literal>FlushModeType</literal>s defined by the specification,
and "
-"it is our expectation that other vendors will soon provide a similar "
-"extension."
+msgid "By default, the persistence context is flushed (synchronized with the
database) at the end of each transaction. This is sometimes the desired behavior. But very
often, we would prefer that all changes are held in memory and only written to the
database when the conversation ends successfully. This allows for truly atomic
conversations. As the result of a truly stupid and shortsighted decision by certain
non-JBoss, non-Sun and non-Sybase members of the EJB 3.0 expert group, there is currently
no simple, usable and portable way to implement atomic conversations using EJB 3.0
persistence. However, Hibernate provides this feature as a vendor extension to the
<literal>FlushModeType</literal>s defined by the specification, and it is our
expectation that other vendors will soon provide a similar extension."
msgstr ""
#. Tag: para
#: Persistence.xml:419
#, no-c-format
-msgid ""
-"Seam lets you specify <literal>FlushModeType.MANUAL</literal> when
beginning "
-"a conversation. Currently, this works only when Hibernate is the underlying "
-"persistence provider, but we plan to support other equivalent vendor "
-"extensions."
+msgid "Seam lets you specify <literal>FlushModeType.MANUAL</literal>
when beginning a conversation. Currently, this works only when Hibernate is the underlying
persistence provider, but we plan to support other equivalent vendor extensions."
msgstr ""
#. Tag: programlisting
@@ -718,9 +484,7 @@
#. Tag: para
#: Persistence.xml:427
#, no-c-format
-msgid ""
-"Now, the <literal>claim</literal> object remains managed by the
persistence "
-"context for the rest ot the conversation. We can make changes to the claim:"
+msgid "Now, the <literal>claim</literal> object remains managed by the
persistence context for the rest ot the conversation. We can make changes to the
claim:"
msgstr ""
#. Tag: programlisting
@@ -740,9 +504,7 @@
#. Tag: para
#: Persistence.xml:434
#, no-c-format
-msgid ""
-"But these changes will not be flushed to the database until we explicitly "
-"force the flush to occur:"
+msgid "But these changes will not be flushed to the database until we explicitly
force the flush to occur:"
msgstr ""
#. Tag: programlisting
@@ -762,9 +524,7 @@
#. Tag: para
#: Persistence.xml:441
#, no-c-format
-msgid ""
-"Of course, you could set the <literal>flushMode</literal> to "
-"<literal>MANUAL</literal> from pages.xml, for example in a navigation
rule:"
+msgid "Of course, you could set the <literal>flushMode</literal> to
<literal>MANUAL</literal> from pages.xml, for example in a navigation
rule:"
msgstr ""
#. Tag: programlisting
@@ -776,8 +536,7 @@
#. Tag: para
#: Persistence.xml:448
#, no-c-format
-msgid ""
-"You can set any Seam Managed Persistence Context to use manual flush mode:"
+msgid "You can set any Seam Managed Persistence Context to use manual flush
mode:"
msgstr ""
#. Tag: programlisting
@@ -786,14 +545,12 @@
msgid ""
"<![CDATA[<components
xmlns=\"http://jboss.com/products/seam/components\"\n"
"
xmlns:core=\"http://jboss.com/products/seam/core\">\n"
-" <core:manager conversation-timeout=\"120000\"
default-flush-mode=\"manual"
-"\" />\n"
+" <core:manager conversation-timeout=\"120000\"
default-flush-mode=\"manual\" />\n"
"</components>]]>"
msgstr ""
"<![CDATA[<components
xmlns=\"http://jboss.com/products/seam/components\"\n"
"
xmlns:core=\"http://jboss.com/products/seam/core\">\n"
-" <core:manager conversation-timeout=\"120000\"
default-flush-mode=\"manual"
-"\" />\n"
+" <core:manager conversation-timeout=\"120000\"
default-flush-mode=\"manual\" />\n"
"</components>]]>"
#. Tag: title
@@ -805,24 +562,13 @@
#. Tag: para
#: Persistence.xml:462
#, no-c-format
-msgid ""
-"The <literal>EntityManager</literal> interface lets you access a
vendor-"
-"specific API via the <literal>getDelegate()</literal> method.
Naturally, the "
-"most interesting vendor is Hibernate, and the most powerful delegate "
-"interface is <literal>org.hibernate.Session</literal>. You'd be
nuts to use "
-"anything else. Trust me, I'm not biased at all. If you must use a different
"
-"JPA provider see <link linkend=\"alt-jpa-providers\">Using
Alternate JPA "
-"Providers</link>."
+msgid "The <literal>EntityManager</literal> interface lets you access a
vendor-specific API via the <literal>getDelegate()</literal> method.
Naturally, the most interesting vendor is Hibernate, and the most powerful delegate
interface is <literal>org.hibernate.Session</literal>. You'd be nuts to
use anything else. Trust me, I'm not biased at all. If you must use a different JPA
provider see <link linkend=\"alt-jpa-providers\">Using Alternate JPA
Providers</link>."
msgstr ""
#. Tag: para
#: Persistence.xml:471
#, no-c-format
-msgid ""
-"But regardless of whether you're using Hibernate (genius!) or something else
"
-"(masochist, or just not very bright), you'll almost certainly want to use
"
-"the delegate in your Seam components from time to time. One approach would "
-"be the following:"
+msgid "But regardless of whether you're using Hibernate (genius!) or something
else (masochist, or just not very bright), you'll almost certainly want to use the
delegate in your Seam components from time to time. One approach would be the
following:"
msgstr ""
#. Tag: programlisting
@@ -833,26 +579,20 @@
"\n"
"@Create\n"
"public void init() {\n"
-" ( (Session) entityManager.getDelegate()
).enableFilter(\"currentVersions"
-"\");\n"
+" ( (Session) entityManager.getDelegate()
).enableFilter(\"currentVersions\");\n"
"}]]>"
msgstr ""
"<![CDATA[@In EntityManager entityManager;\n"
"\n"
"@Create\n"
"public void init() {\n"
-" ( (Session) entityManager.getDelegate()
).enableFilter(\"currentVersions"
-"\");\n"
+" ( (Session) entityManager.getDelegate()
).enableFilter(\"currentVersions\");\n"
"}]]>"
#. Tag: para
#: Persistence.xml:480
#, no-c-format
-msgid ""
-"But typecasts are unquestionably the ugliest syntax in the Java language, so
"
-"most people avoid them whenever possible. Here's a different way to get at
"
-"the delegate. First, add the following line to
<literal>components.xml</"
-"literal>:"
+msgid "But typecasts are unquestionably the ugliest syntax in the Java language, so
most people avoid them whenever possible. Here's a different way to get at the
delegate. First, add the following line to
<literal>components.xml</literal>:"
msgstr ""
#. Tag: programlisting
@@ -873,7 +613,7 @@
#: Persistence.xml:488
#, no-c-format
msgid "Now we can inject the session directly:"
-msgstr ""
+msgstr "Ora si può iniettare la sessione direttamente:"
#. Tag: programlisting
#: Persistence.xml:492
@@ -902,24 +642,17 @@
#. Tag: para
#: Persistence.xml:498
#, no-c-format
-msgid ""
-"Seam proxies the <literal>EntityManager</literal> or
<literal>Session</"
-"literal> object whenever you use a Seam-managed persistence context or "
-"inject a container managed persistence context using "
-"<literal>@PersistenceContext</literal>. This lets you use EL
expressions in "
-"your query strings, safely and efficiently. For example, this:"
+msgid "Seam proxies the <literal>EntityManager</literal> or
<literal>Session</literal> object whenever you use a Seam-managed persistence
context or inject a container managed persistence context using
<literal>@PersistenceContext</literal>. This lets you use EL expressions in
your query strings, safely and efficiently. For example, this:"
msgstr ""
#. Tag: programlisting
#: Persistence.xml:506
#, no-c-format
msgid ""
-"<![CDATA[User user = em.createQuery(\"from User where
username=#{user."
-"username}\")\n"
+"<![CDATA[User user = em.createQuery(\"from User where
username=#{user.username}\")\n"
" .getSingleResult();]]>"
msgstr ""
-"<![CDATA[User user = em.createQuery(\"from User where
username=#{user."
-"username}\")\n"
+"<![CDATA[User user = em.createQuery(\"from User where
username=#{user.username}\")\n"
" .getSingleResult();]]>"
#. Tag: para
@@ -950,12 +683,10 @@
#: Persistence.xml:516
#, no-c-format
msgid ""
-"<![CDATA[User user = em.createQuery(\"from User where username=\" +
user."
-"getUsername()) //BAD!\n"
+"<![CDATA[User user = em.createQuery(\"from User where username=\" +
user.getUsername()) //BAD!\n"
" .getSingleResult();]]>"
msgstr ""
-"<![CDATA[User user = em.createQuery(\"from User where username=\" +
user."
-"getUsername()) //BAD!\n"
+"<![CDATA[User user = em.createQuery(\"from User where username=\" +
user.getUsername()) //BAD!\n"
" .getSingleResult();]]>"
#. Tag: para
@@ -973,23 +704,13 @@
#. Tag: para
#: Persistence.xml:527
#, no-c-format
-msgid ""
-"The coolest, and most unique, feature of Hibernate is
<emphasis>filters</"
-"emphasis>. Filters let you provide a restricted view of the data in the "
-"database. You can find out more about filters in the Hibernate "
-"documentation. But we thought we'd mention an easy way to incorporate "
-"filters into a Seam application, one that works especially well with the "
-"Seam Application Framework."
+msgid "The coolest, and most unique, feature of Hibernate is
<emphasis>filters</emphasis>. Filters let you provide a restricted view of the
data in the database. You can find out more about filters in the Hibernate documentation.
But we thought we'd mention an easy way to incorporate filters into a Seam
application, one that works especially well with the Seam Application Framework."
msgstr ""
#. Tag: para
#: Persistence.xml:535
#, no-c-format
-msgid ""
-"Seam-managed persistence contexts may have a list of filters defined, which "
-"will be enabled whenever an <literal>EntityManager</literal> or
Hibernate "
-"<literal>Session</literal> is first created. (Of course, they may only
be "
-"used when Hibernate is the underlying persistence provider.)"
+msgid "Seam-managed persistence contexts may have a list of filters defined, which
will be enabled whenever an <literal>EntityManager</literal> or Hibernate
<literal>Session</literal> is first created. (Of course, they may only be used
when Hibernate is the underlying persistence provider.)"
msgstr ""
#. Tag: programlisting
@@ -1013,8 +734,7 @@
"</persistence:filter>\n"
"\n"
"<persistence:managed-persistence-context
name=\"personDatabase\"\n"
-"
persistence-unit-jndi-name=\"java:/EntityManagerFactories/personDatabase"
-"\">\n"
+"
persistence-unit-jndi-name=\"java:/EntityManagerFactories/personDatabase\">\n"
" <persistence:filters>\n"
" <value>#{regionFilter}</value>\n"
" <value>#{currentFilter}</value>\n"
@@ -1038,10 +758,10 @@
"</persistence:filter>\n"
"\n"
"<persistence:managed-persistence-context
name=\"personDatabase\"\n"
-"
persistence-unit-jndi-name=\"java:/EntityManagerFactories/personDatabase"
-"\">\n"
+"
persistence-unit-jndi-name=\"java:/EntityManagerFactories/personDatabase\">\n"
" <persistence:filters>\n"
" <value>#{regionFilter}</value>\n"
" <value>#{currentFilter}</value>\n"
" </persistence:filters>\n"
"</persistence:managed-persistence-context>]]>"
+
Modified: trunk/doc/Seam_Reference_Guide/it-IT/Remoting.po
===================================================================
--- trunk/doc/Seam_Reference_Guide/it-IT/Remoting.po 2009-02-06 17:43:34 UTC (rev 10016)
+++ trunk/doc/Seam_Reference_Guide/it-IT/Remoting.po 2009-02-06 17:45:07 UTC (rev 10017)
@@ -6,7 +6,7 @@
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To:
http://bugs.kde.org\n"
"POT-Creation-Date: 2008-12-04 00:58+0000\n"
-"PO-Revision-Date: 2009-02-04 18:32+0100\n"
+"PO-Revision-Date: 2009-02-06 18:08+0100\n"
"Last-Translator: Nicola Benaglia <nico.benaz(a)gmail.com>\n"
"Language-Team: none\n"
"MIME-Version: 1.0\n"
@@ -134,7 +134,7 @@
#: Remoting.xml:50
#, no-c-format
msgid "Client-side interaction with your components is all performed via the
<literal>Seam</literal> Javascript object. This object is defined in
<literal>remote.js</literal>, and you'll be using it to make asynchronous
calls against your component. It is split into two areas of functionality;
<literal>Seam.Component</literal> contains methods for working with components
and <literal>Seam.Remoting</literal> contains methods for executing remote
requests. The easiest way to become familiar with this object is to start with a simple
example."
-msgstr ""
+msgstr "L'interazione lato client con i componenti viene eseguita tutta tramite
l'oggetto Javascript <literal>Seam</literal>. Quest'oggetti è definito
in <literal>remote.js</literal>, e lo si userà per fare chiamate asincrone
verso il componente. E' suddiviso in due aree di funzionalità;
<literal>Seam.Component</literal> contiene metodi per lavorare con i
componenti e <literal>Seam.Remoting</literal> contiene metodi per eseguire le
richieste remote. La via più facile per diventare familiare con quest'oggetto è
cominciare con un semplice esempio."
#. Tag: title
#: Remoting.xml:57
@@ -146,7 +146,7 @@
#: Remoting.xml:59
#, no-c-format
msgid "Let's step through a simple example to see how the
<literal>Seam</literal> object works. First of all, let's create a new
Seam component called <literal>helloAction</literal>."
-msgstr ""
+msgstr "Si cominci con un semplice esempio per vedere come funziona l'oggetto
<literal>Seam</literal>"
#. Tag: programlisting
#: Remoting.xml:62
@@ -614,7 +614,7 @@
#: Remoting.xml:253
#, no-c-format
msgid "Setting and reading the Conversation ID"
-msgstr ""
+msgstr "Impostazione e lettura dell'ID di conversazione"
#. Tag: para
#: Remoting.xml:256
@@ -680,7 +680,7 @@
#: Remoting.xml:301
#, no-c-format
msgid "Working with Data types"
-msgstr ""
+msgstr "Lavorare con i tipi di dati"
#. Tag: title
#: Remoting.xml:304
@@ -912,7 +912,7 @@
#: Remoting.xml:428
#, no-c-format
msgid "Or configure it via components.xml:"
-msgstr ""
+msgstr "O lo si configuri via components.xml:"
#. Tag: programlisting
#: Remoting.xml:430
@@ -1000,7 +1000,7 @@
#: Remoting.xml:473
#, no-c-format
msgid "Seam.Remoting.loadingMessage = \"Loading...\";"
-msgstr ""
+msgstr "Seam.Remoting.loadingMessage = \"Loading...\";"
#. Tag: title
#: Remoting.xml:477
@@ -1022,6 +1022,9 @@
"Seam.Remoting.displayLoadingMessage = function() {};\n"
"Seam.Remoting.hideLoadingMessage = function() {};"
msgstr ""
+"// non mostrare l'indicatore di caricamento\n"
+"Seam.Remoting.displayLoadingMessage = function() {};\n"
+"Seam.Remoting.hideLoadingMessage = function() {};"
#. Tag: title
#: Remoting.xml:487