Hi, Thanks for your response. It’s still not working with this configuration: PODFILE: source 'https://github.com/CocoaPods/Specs.git' platform :ios, '8.0' platform :ios, :deployment_target => '8.0' xcodeproj 'TestAerogear.xcodeproj' use_frameworks! pod 'AeroGearSyncClient' pod 'Starscream', '~> 1.0’ — POD INSTALL: CocoaPods 1.0.0.beta.2 is available. To update use: `gem install cocoapods --pre` [!] This is a test version we'd love you to try. For more information see http://blog.cocoapods.org and the CHANGELOG for this version http://git.io/BaH8pQ. Analyzing dependencies [!] Unable to satisfy the following requirements: - `Starscream (~> 1.0)` required by `Podfile` - `Starscream (= 0.9.3)` required by `Podfile.lock` Specs satisfying the `Starscream (= 0.9.3)` dependency were found, but they required a higher minimum deployment target. On 07 Jan 2016, at 17:34, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hello Nataniel, By the look of the errors it seems the Swift syntax of starscream is not using Swift 2. This is hinted by the error on 'join' (Swift1.0 syntax) whereas joinWithSeparator() is Swift 2 syntax). In Podfile[1] check you're pointing to starscream 1.0.2+ or latest version on master. Previous version of the lib used Swift 1 syntax. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-sync-client/blob/master/Podfile#L8 _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users

Hi, Thanks for the swift reply :) Looking forward for the new version ! But using the exemple in [2] such as: source 'https://github.com/CocoaPods/Specs.git' platform :ios, '8.0' platform :ios, :deployment_target => '8.0' xcodeproj 'TestAerogear.xcodeproj' use_frameworks! pod 'AeroGearSyncClient', :git => 'https://github.com/aerogear/aerogear-ios-sync-client' Still give me some errors like these: Analyzing dependencies Pre-downloading: `AeroGearSyncClient` from `https://github.com/aerogear/aerogear-ios-sync-client` [!] Unable to find a specification for 'AeroGearSyncClient'. I think the problem is related when you lint the pod. Best regards ! On 08 Jan 2016, at 12:01, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hi Looking into aerogear-ios-sync-client release it seems 1.0.0-alpha.3 (which update to Swift 2 syntax) did not make it to cocoapods although we did have a tag for it [1]. 1.0.0-alpha.2 (the latest on cocoapods is still on Swift 1.2 syntax). I'm going to release 1.0.0-alpha.3 shortly in the meantime (as a work around), please us the latest git master version as shown [2]. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-sync-client/tree/1.0.0-alpha.3 [2] https://github.com/aerogear/aerogear-ios-cookbook/blob/master/Jedi/JsonPa... On 8 January 2016 at 08:39, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi, Thanks for your response. It’s still not working with this configuration: PODFILE: source 'https://github.com/CocoaPods/Specs.git' platform :ios, '8.0' platform :ios, :deployment_target => '8.0' xcodeproj 'TestAerogear.xcodeproj' use_frameworks! pod 'AeroGearSyncClient' pod 'Starscream', '~> 1.0’ — POD INSTALL: CocoaPods 1.0.0.beta.2 is available. To update use: `gem install cocoapods --pre` [!] This is a test version we'd love you to try. For more information see http://blog.cocoapods.org<http://blog.cocoapods.org/> and the CHANGELOG for this version http://git.io/BaH8pQ. Analyzing dependencies [!] Unable to satisfy the following requirements: - `Starscream (~> 1.0)` required by `Podfile` - `Starscream (= 0.9.3)` required by `Podfile.lock` Specs satisfying the `Starscream (= 0.9.3)` dependency were found, but they required a higher minimum deployment target. On 07 Jan 2016, at 17:34, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hello Nataniel, By the look of the errors it seems the Swift syntax of starscream is not using Swift 2. This is hinted by the error on 'join' (Swift1.0 syntax) whereas joinWithSeparator() is Swift 2 syntax). In Podfile[1] check you're pointing to starscream 1.0.2+ or latest version on master. Previous version of the lib used Swift 1 syntax. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-sync-client/blob/master/Podfile#L8 _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users

The cocoa pod version is: 0.39.0 It’s the latest, not the last beta version that is 1.0.0.beta.2 Regards, Nataniel On 08 Jan 2016, at 12:10, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Which cocoapods version are you on? ++ Corinne On 8 January 2016 at 09:08, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi, Thanks for the swift reply :) Looking forward for the new version ! But using the exemple in [2] such as: source 'https://github.com/CocoaPods/Specs.git' platform :ios, '8.0' platform :ios, :deployment_target => '8.0' xcodeproj 'TestAerogear.xcodeproj' use_frameworks! pod 'AeroGearSyncClient', :git => 'https://github.com/aerogear/aerogear-ios-sync-client' Still give me some errors like these: Analyzing dependencies Pre-downloading: `AeroGearSyncClient` from `https://github.com/aerogear/aerogear-ios-sync-client`<https://github.com/aerogear/aerogear-ios-sync-client> [!] Unable to find a specification for 'AeroGearSyncClient'. I think the problem is related when you lint the pod. Best regards ! On 08 Jan 2016, at 12:01, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hi Looking into aerogear-ios-sync-client release it seems 1.0.0-alpha.3 (which update to Swift 2 syntax) did not make it to cocoapods although we did have a tag for it [1]. 1.0.0-alpha.2 (the latest on cocoapods is still on Swift 1.2 syntax). I'm going to release 1.0.0-alpha.3 shortly in the meantime (as a work around), please us the latest git master version as shown [2]. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-sync-client/tree/1.0.0-alpha.3 [2] https://github.com/aerogear/aerogear-ios-cookbook/blob/master/Jedi/JsonPa... On 8 January 2016 at 08:39, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi, Thanks for your response. It’s still not working with this configuration: PODFILE: source 'https://github.com/CocoaPods/Specs.git' platform :ios, '8.0' platform :ios, :deployment_target => '8.0' xcodeproj 'TestAerogear.xcodeproj' use_frameworks! pod 'AeroGearSyncClient' pod 'Starscream', '~> 1.0’ — POD INSTALL: CocoaPods 1.0.0.beta.2 is available. To update use: `gem install cocoapods --pre` [!] This is a test version we'd love you to try. For more information see http://blog.cocoapods.org<http://blog.cocoapods.org/> and the CHANGELOG for this version http://git.io/BaH8pQ. Analyzing dependencies [!] Unable to satisfy the following requirements: - `Starscream (~> 1.0)` required by `Podfile` - `Starscream (= 0.9.3)` required by `Podfile.lock` Specs satisfying the `Starscream (= 0.9.3)` dependency were found, but they required a higher minimum deployment target. On 07 Jan 2016, at 17:34, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hello Nataniel, By the look of the errors it seems the Swift syntax of starscream is not using Swift 2. This is hinted by the error on 'join' (Swift1.0 syntax) whereas joinWithSeparator() is Swift 2 syntax). In Podfile[1] check you're pointing to starscream 1.0.2+ or latest version on master. Previous version of the lib used Swift 1 syntax. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-sync-client/blob/master/Podfile#L8 _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users

Hi, It’s seems to be better that way ! It would like to point you out that with this workaround, even with the Jedi Demo project, there are two errors while building the project: [cid:D3F7DB2E-EA6E-4D80-A2C4-C4F2DCE5B350] It seems that the import of JSONTools file is not correctly bridged for AeroGearSyncJsonPatch. Best regards, Nataniel On 08 Jan 2016, at 12:44, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hi Nataniel Sorry my bad the pod on master are expressed slightly different (no subpod anymore) see correct syntax [1]. Replace AeroGearSyncClient by AeroGearSyncClientJsonPatch. This is a workaround until i do proper release. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-cookbook/blob/master/Jedi/JsonPa... On 8 January 2016 at 09:15, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: The cocoa pod version is: 0.39.0 It’s the latest, not the last beta version that is 1.0.0.beta.2 Regards, Nataniel On 08 Jan 2016, at 12:10, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Which cocoapods version are you on? ++ Corinne On 8 January 2016 at 09:08, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi, Thanks for the swift reply :) Looking forward for the new version ! But using the exemple in [2] such as: source 'https://github.com/CocoaPods/Specs.git' platform :ios, '8.0' platform :ios, :deployment_target => '8.0' xcodeproj 'TestAerogear.xcodeproj' use_frameworks! pod 'AeroGearSyncClient', :git => 'https://github.com/aerogear/aerogear-ios-sync-client' Still give me some errors like these: Analyzing dependencies Pre-downloading: `AeroGearSyncClient` from `https://github.com/aerogear/aerogear-ios-sync-client`<https://github.com/aerogear/aerogear-ios-sync-client> [!] Unable to find a specification for 'AeroGearSyncClient'. I think the problem is related when you lint the pod. Best regards ! On 08 Jan 2016, at 12:01, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hi Looking into aerogear-ios-sync-client release it seems 1.0.0-alpha.3 (which update to Swift 2 syntax) did not make it to cocoapods although we did have a tag for it [1]. 1.0.0-alpha.2 (the latest on cocoapods is still on Swift 1.2 syntax). I'm going to release 1.0.0-alpha.3 shortly in the meantime (as a work around), please us the latest git master version as shown [2]. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-sync-client/tree/1.0.0-alpha.3 [2] https://github.com/aerogear/aerogear-ios-cookbook/blob/master/Jedi/JsonPa... On 8 January 2016 at 08:39, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi, Thanks for your response. It’s still not working with this configuration: PODFILE: source 'https://github.com/CocoaPods/Specs.git' platform :ios, '8.0' platform :ios, :deployment_target => '8.0' xcodeproj 'TestAerogear.xcodeproj' use_frameworks! pod 'AeroGearSyncClient' pod 'Starscream', '~> 1.0’ — POD INSTALL: CocoaPods 1.0.0.beta.2 is available. To update use: `gem install cocoapods --pre` [!] This is a test version we'd love you to try. For more information see http://blog.cocoapods.org<http://blog.cocoapods.org/> and the CHANGELOG for this version http://git.io/BaH8pQ. Analyzing dependencies [!] Unable to satisfy the following requirements: - `Starscream (~> 1.0)` required by `Podfile` - `Starscream (= 0.9.3)` required by `Podfile.lock` Specs satisfying the `Starscream (= 0.9.3)` dependency were found, but they required a higher minimum deployment target. On 07 Jan 2016, at 17:34, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hello Nataniel, By the look of the errors it seems the Swift syntax of starscream is not using Swift 2. This is hinted by the error on 'join' (Swift1.0 syntax) whereas joinWithSeparator() is Swift 2 syntax). In Podfile[1] check you're pointing to starscream 1.0.2+ or latest version on master. Previous version of the lib used Swift 1 syntax. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-sync-client/blob/master/Podfile#L8 _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users

By the way Corrinne, What version of Xcode / SWIFT are you using ? FYI I’m using Xcode 7.2 + Swift 2.1. Seems that flags are not correctly set. Best regards, Nataniel On 11 Jan 2016, at 11:54, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi ! Any news on these errors ? I tried a few things on it, but I can’t make it compile :( Looking forward reading to reading from you. Nataniel. On 08 Jan 2016, at 15:02, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi, It’s seems to be better that way ! It would like to point you out that with this workaround, even with the Jedi Demo project, there are two errors while building the project: <Screen Shot 2016-01-08 at 14.52.05.png> It seems that the import of JSONTools file is not correctly bridged for AeroGearSyncJsonPatch. Best regards, Nataniel On 08 Jan 2016, at 12:44, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hi Nataniel Sorry my bad the pod on master are expressed slightly different (no subpod anymore) see correct syntax [1]. Replace AeroGearSyncClient by AeroGearSyncClientJsonPatch. This is a workaround until i do proper release. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-cookbook/blob/master/Jedi/JsonPa... On 8 January 2016 at 09:15, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: The cocoa pod version is: 0.39.0 It’s the latest, not the last beta version that is 1.0.0.beta.2 Regards, Nataniel On 08 Jan 2016, at 12:10, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Which cocoapods version are you on? ++ Corinne On 8 January 2016 at 09:08, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi, Thanks for the swift reply :) Looking forward for the new version ! But using the exemple in [2] such as: source 'https://github.com/CocoaPods/Specs.git' platform :ios, '8.0' platform :ios, :deployment_target => '8.0' xcodeproj 'TestAerogear.xcodeproj' use_frameworks! pod 'AeroGearSyncClient', :git => 'https://github.com/aerogear/aerogear-ios-sync-client' Still give me some errors like these: Analyzing dependencies Pre-downloading: `AeroGearSyncClient` from `https://github.com/aerogear/aerogear-ios-sync-client`<https://github.com/aerogear/aerogear-ios-sync-client> [!] Unable to find a specification for 'AeroGearSyncClient'. I think the problem is related when you lint the pod. Best regards ! On 08 Jan 2016, at 12:01, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hi Looking into aerogear-ios-sync-client release it seems 1.0.0-alpha.3 (which update to Swift 2 syntax) did not make it to cocoapods although we did have a tag for it [1]. 1.0.0-alpha.2 (the latest on cocoapods is still on Swift 1.2 syntax). I'm going to release 1.0.0-alpha.3 shortly in the meantime (as a work around), please us the latest git master version as shown [2]. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-sync-client/tree/1.0.0-alpha.3 [2] https://github.com/aerogear/aerogear-ios-cookbook/blob/master/Jedi/JsonPa... On 8 January 2016 at 08:39, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi, Thanks for your response. It’s still not working with this configuration: PODFILE: source 'https://github.com/CocoaPods/Specs.git' platform :ios, '8.0' platform :ios, :deployment_target => '8.0' xcodeproj 'TestAerogear.xcodeproj' use_frameworks! pod 'AeroGearSyncClient' pod 'Starscream', '~> 1.0’ — POD INSTALL: CocoaPods 1.0.0.beta.2 is available. To update use: `gem install cocoapods --pre` [!] This is a test version we'd love you to try. For more information see http://blog.cocoapods.org<http://blog.cocoapods.org/> and the CHANGELOG for this version http://git.io/BaH8pQ. Analyzing dependencies [!] Unable to satisfy the following requirements: - `Starscream (~> 1.0)` required by `Podfile` - `Starscream (= 0.9.3)` required by `Podfile.lock` Specs satisfying the `Starscream (= 0.9.3)` dependency were found, but they required a higher minimum deployment target. On 07 Jan 2016, at 17:34, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hello Nataniel, By the look of the errors it seems the Swift syntax of starscream is not using Swift 2. This is hinted by the error on 'join' (Swift1.0 syntax) whereas joinWithSeparator() is Swift 2 syntax). In Podfile[1] check you're pointing to starscream 1.0.2+ or latest version on master. Previous version of the lib used Swift 1 syntax. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-sync-client/blob/master/Podfile#L8 _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users

Hi Corrinne, Thanks you very much for your help ! So this is what it came out with my testings: 1) First the Podfile used a private library: for KiteValidator; So in order to work that out, had to slightly modify the Podfile like this : pod 'KiteJSONValidator', :git => 'https://github.com/corinnekrych/KiteJSONValidator.git', :branch => 'podspec.public.header' 2) The import in ViewController.swift from the project : aerogear-ios-cookbook/Jedi/JsonPatchSync import AeroGearSync import AeroGearSyncClient Had to be changed like this: import AeroGearSyncJsonPatch import AeroGearSyncClientJsonPatch 3) Now i’m facing a other problem : private var syncClient: SyncClient<JsonPatchSynchronizer, InMemoryDataStore<JsonNode, JsonPatchEdit>> SyncClient type is unrecognised by the Xcode (even after a build clean) ----- This were i’m blocked. But i feel that we are not that far from the solution :) Let me know if I did something wrong along my explanation. Best regards ! Nataniel On 11 Jan 2016, at 14:28, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hello Nataniel, I use Xcode 7.2, cocoapods 0.39.0 like you and I faced the same issue. To sort out the issue, I've defined a new podspec for the ObjC dependencies JSONTools and KiteValidator. Mainly, I rework the import statement and define a modulemap for both libraries. As we don't directly own the libs I'll issue a PR and start the discussion. Once it's merged we can do a new cocoapods release. In the mean time, you can try it with these fork/branch, in your Podfile, try [1]. Let me know how it goes for you. ++ Corinne. [1] https://github.com/corinnekrych/aerogear-ios-cookbook-1/blob/8cea70682c2e... On 11 January 2016 at 09:42, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: By the way Corrinne, What version of Xcode / SWIFT are you using ? FYI I’m using Xcode 7.2 + Swift 2.1. Seems that flags are not correctly set. Best regards, Nataniel On 11 Jan 2016, at 11:54, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi ! Any news on these errors ? I tried a few things on it, but I can’t make it compile :( Looking forward reading to reading from you. Nataniel. On 08 Jan 2016, at 15:02, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi, It’s seems to be better that way ! It would like to point you out that with this workaround, even with the Jedi Demo project, there are two errors while building the project: <Screen Shot 2016-01-08 at 14.52.05.png> It seems that the import of JSONTools file is not correctly bridged for AeroGearSyncJsonPatch. Best regards, Nataniel On 08 Jan 2016, at 12:44, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hi Nataniel Sorry my bad the pod on master are expressed slightly different (no subpod anymore) see correct syntax [1]. Replace AeroGearSyncClient by AeroGearSyncClientJsonPatch. This is a workaround until i do proper release. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-cookbook/blob/master/Jedi/JsonPa... On 8 January 2016 at 09:15, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: The cocoa pod version is: 0.39.0 It’s the latest, not the last beta version that is 1.0.0.beta.2 Regards, Nataniel On 08 Jan 2016, at 12:10, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Which cocoapods version are you on? ++ Corinne On 8 January 2016 at 09:08, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi, Thanks for the swift reply :) Looking forward for the new version ! But using the exemple in [2] such as: source 'https://github.com/CocoaPods/Specs.git' platform :ios, '8.0' platform :ios, :deployment_target => '8.0' xcodeproj 'TestAerogear.xcodeproj' use_frameworks! pod 'AeroGearSyncClient', :git => 'https://github.com/aerogear/aerogear-ios-sync-client' Still give me some errors like these: Analyzing dependencies Pre-downloading: `AeroGearSyncClient` from `https://github.com/aerogear/aerogear-ios-sync-client`<https://github.com/aerogear/aerogear-ios-sync-client> [!] Unable to find a specification for 'AeroGearSyncClient'. I think the problem is related when you lint the pod. Best regards ! On 08 Jan 2016, at 12:01, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hi Looking into aerogear-ios-sync-client release it seems 1.0.0-alpha.3 (which update to Swift 2 syntax) did not make it to cocoapods although we did have a tag for it [1]. 1.0.0-alpha.2 (the latest on cocoapods is still on Swift 1.2 syntax). I'm going to release 1.0.0-alpha.3 shortly in the meantime (as a work around), please us the latest git master version as shown [2]. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-sync-client/tree/1.0.0-alpha.3 [2] https://github.com/aerogear/aerogear-ios-cookbook/blob/master/Jedi/JsonPa... On 8 January 2016 at 08:39, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi, Thanks for your response. It’s still not working with this configuration: PODFILE: source 'https://github.com/CocoaPods/Specs.git' platform :ios, '8.0' platform :ios, :deployment_target => '8.0' xcodeproj 'TestAerogear.xcodeproj' use_frameworks! pod 'AeroGearSyncClient' pod 'Starscream', '~> 1.0’ — POD INSTALL: CocoaPods 1.0.0.beta.2 is available. To update use: `gem install cocoapods --pre` [!] This is a test version we'd love you to try. For more information see http://blog.cocoapods.org<http://blog.cocoapods.org/> and the CHANGELOG for this version http://git.io/BaH8pQ. Analyzing dependencies [!] Unable to satisfy the following requirements: - `Starscream (~> 1.0)` required by `Podfile` - `Starscream (= 0.9.3)` required by `Podfile.lock` Specs satisfying the `Starscream (= 0.9.3)` dependency were found, but they required a higher minimum deployment target. On 07 Jan 2016, at 17:34, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hello Nataniel, By the look of the errors it seems the Swift syntax of starscream is not using Swift 2. This is hinted by the error on 'join' (Swift1.0 syntax) whereas joinWithSeparator() is Swift 2 syntax). In Podfile[1] check you're pointing to starscream 1.0.2+ or latest version on master. Previous version of the lib used Swift 1 syntax. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-sync-client/blob/master/Podfile#L8 _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users

Hi ! That did the trick: - Alright after cleaning the derivedData folder - Clean Build Folder - Clean - Modified ONLY_ACTIVE_ARCH to yes - Make sur that i changed the imports in ViewController.swift: import AeroGearSyncClientJsonPatch import AeroGearSyncJsonPatch —— It compiled and started the app on simulator. Thanks for the help ! I will work with that for now. Looking forward the next update on cocoapods ;) Till then, thanks and have good day ! On 11 Jan 2016, at 16:40, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hi Nataniel I did the same steps you described to solve the last issue, go to AeroGeatSyncDemo target, select build settings and set: ONLY_ACTIVE_ARCH = YES; Then delete do a clean build (delete DerivedData) Let me know how it goes for you. I'll issue a PR on Jedi cookbook. ++ Corinne On 11 January 2016 at 12:51, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi Corrinne, Thanks you very much for your help ! So this is what it came out with my testings: 1) First the Podfile used a private library: for KiteValidator; So in order to work that out, had to slightly modify the Podfile like this : pod 'KiteJSONValidator', :git => 'https://github.com<https://github.com/>/corinnekrych/KiteJSONValidator.git', :branch => 'podspec.public.header' 2) The import in ViewController.swift from the project : aerogear-ios-cookbook/Jedi/JsonPatchSync import AeroGearSync import AeroGearSyncClient Had to be changed like this: import AeroGearSyncJsonPatch import AeroGearSyncClientJsonPatch 3) Now i’m facing a other problem : private var syncClient: SyncClient<JsonPatchSynchronizer, InMemoryDataStore<JsonNode, JsonPatchEdit>> SyncClient type is unrecognised by the Xcode (even after a build clean) ----- This were i’m blocked. But i feel that we are not that far from the solution :) Let me know if I did something wrong along my explanation. Best regards ! Nataniel On 11 Jan 2016, at 14:28, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hello Nataniel, I use Xcode 7.2, cocoapods 0.39.0 like you and I faced the same issue. To sort out the issue, I've defined a new podspec for the ObjC dependencies JSONTools and KiteValidator. Mainly, I rework the import statement and define a modulemap for both libraries. As we don't directly own the libs I'll issue a PR and start the discussion. Once it's merged we can do a new cocoapods release. In the mean time, you can try it with these fork/branch, in your Podfile, try [1]. Let me know how it goes for you. ++ Corinne. [1] https://github.com/corinnekrych/aerogear-ios-cookbook-1/blob/8cea70682c2e... On 11 January 2016 at 09:42, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: By the way Corrinne, What version of Xcode / SWIFT are you using ? FYI I’m using Xcode 7.2 + Swift 2.1. Seems that flags are not correctly set. Best regards, Nataniel On 11 Jan 2016, at 11:54, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi ! Any news on these errors ? I tried a few things on it, but I can’t make it compile :( Looking forward reading to reading from you. Nataniel. On 08 Jan 2016, at 15:02, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi, It’s seems to be better that way ! It would like to point you out that with this workaround, even with the Jedi Demo project, there are two errors while building the project: <Screen Shot 2016-01-08 at 14.52.05.png> It seems that the import of JSONTools file is not correctly bridged for AeroGearSyncJsonPatch. Best regards, Nataniel On 08 Jan 2016, at 12:44, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hi Nataniel Sorry my bad the pod on master are expressed slightly different (no subpod anymore) see correct syntax [1]. Replace AeroGearSyncClient by AeroGearSyncClientJsonPatch. This is a workaround until i do proper release. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-cookbook/blob/master/Jedi/JsonPa... On 8 January 2016 at 09:15, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: The cocoa pod version is: 0.39.0 It’s the latest, not the last beta version that is 1.0.0.beta.2 Regards, Nataniel On 08 Jan 2016, at 12:10, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Which cocoapods version are you on? ++ Corinne On 8 January 2016 at 09:08, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi, Thanks for the swift reply :) Looking forward for the new version ! But using the exemple in [2] such as: source 'https://github.com/CocoaPods/Specs.git' platform :ios, '8.0' platform :ios, :deployment_target => '8.0' xcodeproj 'TestAerogear.xcodeproj' use_frameworks! pod 'AeroGearSyncClient', :git => 'https://github.com/aerogear/aerogear-ios-sync-client' Still give me some errors like these: Analyzing dependencies Pre-downloading: `AeroGearSyncClient` from `https://github.com/aerogear/aerogear-ios-sync-client`<https://github.com/aerogear/aerogear-ios-sync-client> [!] Unable to find a specification for 'AeroGearSyncClient'. I think the problem is related when you lint the pod. Best regards ! On 08 Jan 2016, at 12:01, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hi Looking into aerogear-ios-sync-client release it seems 1.0.0-alpha.3 (which update to Swift 2 syntax) did not make it to cocoapods although we did have a tag for it [1]. 1.0.0-alpha.2 (the latest on cocoapods is still on Swift 1.2 syntax). I'm going to release 1.0.0-alpha.3 shortly in the meantime (as a work around), please us the latest git master version as shown [2]. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-sync-client/tree/1.0.0-alpha.3 [2] https://github.com/aerogear/aerogear-ios-cookbook/blob/master/Jedi/JsonPa... On 8 January 2016 at 08:39, Nataniel Martin <nmartin@appstud.me<mailto:nmartin@appstud.me>> wrote: Hi, Thanks for your response. It’s still not working with this configuration: PODFILE: source 'https://github.com/CocoaPods/Specs.git' platform :ios, '8.0' platform :ios, :deployment_target => '8.0' xcodeproj 'TestAerogear.xcodeproj' use_frameworks! pod 'AeroGearSyncClient' pod 'Starscream', '~> 1.0’ — POD INSTALL: CocoaPods 1.0.0.beta.2 is available. To update use: `gem install cocoapods --pre` [!] This is a test version we'd love you to try. For more information see http://blog.cocoapods.org<http://blog.cocoapods.org/> and the CHANGELOG for this version http://git.io/BaH8pQ. Analyzing dependencies [!] Unable to satisfy the following requirements: - `Starscream (~> 1.0)` required by `Podfile` - `Starscream (= 0.9.3)` required by `Podfile.lock` Specs satisfying the `Starscream (= 0.9.3)` dependency were found, but they required a higher minimum deployment target. On 07 Jan 2016, at 17:34, Corinne Krych <corinnekrych@gmail.com<mailto:corinnekrych@gmail.com>> wrote: Hello Nataniel, By the look of the errors it seems the Swift syntax of starscream is not using Swift 2. This is hinted by the error on 'join' (Swift1.0 syntax) whereas joinWithSeparator() is Swift 2 syntax). In Podfile[1] check you're pointing to starscream 1.0.2+ or latest version on master. Previous version of the lib used Swift 1 syntax. ++ Corinne [1] https://github.com/aerogear/aerogear-ios-sync-client/blob/master/Podfile#L8 _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users _______________________________________________ Aerogear-users mailing list Aerogear-users@lists.jboss.org<mailto:Aerogear-users@lists.jboss.org> https://lists.jboss.org/mailman/listinfo/aerogear-users