6:45 p.m.
I just updated the docs and provided some convenience scripts that should hopefully make
it easier to try out the Hawkular OpenShift Agent. I plan on putting together more stuff
on this - perhaps a blog or video - but I just wanted to get it out there now in case
anyone can try it out and let me know if it works or if there are things that I missed.
See the README:
https://github.com/hawkular/hawkular-openshift-agent/blob/master/README.adoc
The new scripts are here:
https://github.com/hawkular/hawkular-openshift-agent/tree/master/deploy/o...
The idea is there are now "simple" steps to perform that downloads, builds, and
runs an OpenShift environment for you. From there, you run other scripts that deploy the
agent in that OpenShift environment. So those docs and those scripts basically take you
from nothing to a running OpenShift environment with Hawkular Metrics and the Hawkular
OpenShift Agent running inside.
P.S. Special thanks to Matt Wringe, OpenShift whisperer. It would have taken me at least a
month to get this far without him walking me through this yesterday :)
8:19 a.m.
----- Original Message -----
From: "John Mazzitelli" <mazz(a)redhat.com>
To: "Discussions around Hawkular development"
<hawkular-dev(a)lists.jboss.org>
Sent: Wednesday, 9 November, 2016 7:45:29 PM
Subject: [Hawkular-dev] hawkular openshift agent
I just updated the docs and provided some convenience scripts that should
hopefully make it easier to try out the Hawkular OpenShift Agent. I plan on
putting together more stuff on this - perhaps a blog or video - but I just
wanted to get it out there now in case anyone can try it out and let me know
if it works or if there are things that I missed.
See the README:
https://github.com/hawkular/hawkular-openshift-agent/blob/master/README.adoc
The new scripts are here:
https://github.com/hawkular/hawkular-openshift-agent/tree/master/deploy/o...
The idea is there are now "simple" steps to perform that downloads, builds,
and runs an OpenShift environment for you. From there, you run other scripts
that deploy the agent in that OpenShift environment. So those docs and those
scripts basically take you from nothing to a running OpenShift environment
with Hawkular Metrics and the Hawkular OpenShift Agent running inside.
If you don't want to build OpenShift from source or hack on it more directly, to get a
simple setup going its just 'oc cluster up --metrics'
That will start OpenShift in a docker image with metrics already preconfigured.
After that you would have to run the commands to install and setup the agent.
Once you are done with it, running 'oc cluster down' will remove it for you.
It setups a very simple configuration though, and its not great if you want to be able to
do any sort of changes or use it more in an advanced setting. For developing metrics
stuff, its not very useful.
P.S. Special thanks to Matt Wringe, OpenShift whisperer. It would have taken
me at least a month to get this far without him walking me through this
yesterday :)
_______________________________________________
hawkular-dev mailing list
hawkular-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/hawkular-dev
10:12 a.m.
The installation process described by Joel in his latest blog isn't good?
It uses Minishift IIRC.
2016-11-10 15:19 GMT+01:00 Matt Wringe <mwringe(a)redhat.com>:
----- Original Message -----
> From: "John Mazzitelli" <mazz(a)redhat.com>
> To: "Discussions around Hawkular development" <
hawkular-dev(a)lists.jboss.org>
> Sent: Wednesday, 9 November, 2016 7:45:29 PM
> Subject: [Hawkular-dev] hawkular openshift agent
>
> I just updated the docs and provided some convenience scripts that should
> hopefully make it easier to try out the Hawkular OpenShift Agent. I plan
on
> putting together more stuff on this - perhaps a blog or video - but I
just
> wanted to get it out there now in case anyone can try it out and let me
know
> if it works or if there are things that I missed.
>
> See the README:
>
> https://github.com/hawkular/hawkular-openshift-agent/blob/
master/README.adoc
>
> The new scripts are here:
>
> https://github.com/hawkular/hawkular-openshift-agent/tree/
master/deploy/openshift
>
> The idea is there are now "simple" steps to perform that downloads,
builds,
> and runs an OpenShift environment for you. From there, you run other
scripts
> that deploy the agent in that OpenShift environment. So those docs and
those
> scripts basically take you from nothing to a running OpenShift
environment
> with Hawkular Metrics and the Hawkular OpenShift Agent running inside.
If you don't want to build OpenShift from source or hack on it more
directly, to get a simple setup going its just 'oc cluster up --metrics'
That will start OpenShift in a docker image with metrics already
preconfigured.
After that you would have to run the commands to install and setup the
agent.
Once you are done with it, running 'oc cluster down' will remove it for
you.
It setups a very simple configuration though, and its not great if you
want to be able to do any sort of changes or use it more in an advanced
setting. For developing metrics stuff, its not very useful.
>
> P.S. Special thanks to Matt Wringe, OpenShift whisperer. It would have
taken
> me at least a month to get this far without him walking me through this
> yesterday :)
> _______________________________________________
> hawkular-dev mailing list
> hawkular-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/hawkular-dev
>
_______________________________________________
hawkular-dev mailing list
hawkular-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/hawkular-dev
10:20 a.m.
---- Original Message -----
The installation process described by Joel in his latest blog
isn't good?
It uses Minishift IIRC.
No idea. I followed directions to build from source - and that's what the scripts do
(downloads the source, builds it, configures it, runs it)
I don't know what Joel's latest blog says.
For the record, I was originally using OpenShift running in VirtualBox VM, but was hitting
some issues (that probably were my fault) so I switched to doing it this new way. I like
the new way better anyway because running in a VM is annoying :)
11:32 a.m.
I wouldn't say using minishift isn't good - it helped me a lot, compared to
the installation process as described in the Helloworld MSA - but that was
before I heard about "oc cluster up". It looks like it is even easier now.
On Thu, Nov 10, 2016 at 5:20 PM, John Mazzitelli <mazz(a)redhat.com> wrote:
---- Original Message -----
> The installation process described by Joel in his latest blog isn't good?
> It uses Minishift IIRC.
No idea. I followed directions to build from source - and that's what the
scripts do (downloads the source, builds it, configures it, runs it)
I don't know what Joel's latest blog says.
For the record, I was originally using OpenShift running in VirtualBox VM,
but was hitting some issues (that probably were my fault) so I switched to
doing it this new way. I like the new way better anyway because running in
a VM is annoying :)
_______________________________________________
hawkular-dev mailing list
hawkular-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/hawkular-dev
11:38 a.m.
I'm going to play with "oc cluster up" soon. I'm going to be curious
what additional steps I'm still going to need to do (compared to building/running from
source).
----- Original Message -----
I wouldn't say using minishift isn't good - it helped me a
lot, compared to
the installation process as described in the Helloworld MSA - but that was
before I heard about "oc cluster up". It looks like it is even easier now.
On Thu, Nov 10, 2016 at 5:20 PM, John Mazzitelli <mazz(a)redhat.com> wrote:
> ---- Original Message -----
> > The installation process described by Joel in his latest blog isn't good?
> > It uses Minishift IIRC.
>
> No idea. I followed directions to build from source - and that's what the
> scripts do (downloads the source, builds it, configures it, runs it)
>
> I don't know what Joel's latest blog says.
>
> For the record, I was originally using OpenShift running in VirtualBox VM,
> but was hitting some issues (that probably were my fault) so I switched to
> doing it this new way. I like the new way better anyway because running in
> a VM is annoying :)
> _______________________________________________
> hawkular-dev mailing list
> hawkular-dev(a)lists.jboss.org
> https://lists.jboss.org/mailman/listinfo/hawkular-dev
>
3347
days inactive
3347
days old
5 comments
4 participants
participants (4)
-
Joel Takvorian -
John Mazzitelli -
Matt Wringe -
Thomas Segismont