6:21 a.m.
O, my god!
Jeff, you are right. Based on your stp.archivedsite-2.0.0.M3.zip, I get
the issue.
But based on Ganymede, this issue does not occur.
The stp modeler is too distable!
Which version should I support? or both?
Any suggestion are appreciated.
Grid
----- Original Message -----
From: "grid.qian" <fqian(a)redhat.com>
To: "Jeffrey Delong" <jdelong(a)redhat.com>
Cc: jbosstools-dev(a)lists.jboss.org, "John Graham" <jgraham(a)redhat.com>
Sent: Sunday, December 7, 2008 9:45:06 PM GMT -07:00 US/Canada Mountain
Subject: Re: [jbosstools-dev] Re: How to use JBPm Converter
> Grid,
>
> As I stated below, I am using the SOA Tools BPMN Editor.
>
>
>
>>>> Now I have installed:
>>>>
>>>> eclipse-jee-ganymede-SR1-linux-gtk
>>>> JBossTools-3.0.0.CR1-N200812050815-ALL-linux-gtk
>>>> and the SOA Tools BPMN Modeler from stp.archivedsite-2.0.0.M3.zip
>>>>
>>>>
>
> It is true that my models were generated from PI4SOA CDL models. However I created a
very simple model directly in SOA Tools BPMN Modeler and I experience the same issue when
trying to convert it to JPDL (attached those files). Also, not sure what you mean by
"sequenceflow". I don't see sequenceflow in any .bpmn or .bpmn_diagram.
>
>
O, "sequenceflow" is a name from bpmn specification. In *.bpmn, it 's
name is "sequenceEdges". In stp bpmn editor, it's name is Flow
Connector.
I am running stp bpmn editor by debugging stp bpmn editor sources. So
maybe some differences?
Where do you get the stp.archivedsite-2.0.0.M3.zip? Please give me a
link.Thanks.
> Jeff
>
>
> ----- Original Message -----
> From: "grid.qian" <fqian(a)redhat.com>
> To: "John Graham" <jgraham(a)redhat.com>
> Cc: "Jeffrey Delong" <jdelong(a)redhat.com>,
jbosstools-dev(a)lists.jboss.org
> Sent: Sunday, December 7, 2008 8:14:43 PM GMT -07:00 US/Canada Mountain
> Subject: Re: [jbosstools-dev] Re: How to use JBPm Converter
>
> Hi Jeff,
> I have known the reason of the issue JBIDE-3364.
> I think your bpmn files are not from STP BPMN EDITOR?
> STP bpmn editor bpmn file: *.bpmn, it's sequenceflow has a attribute:
> source. The source is the sequenceflow's source node. But your bpmn
> files has not this attribute. So this issue occurs.
>
> John,
> We need to support these files from other editor?
> If yes, I need to do some works for it.
> If not, I have a workaround:
> Open the bpmn file using stp bpmn editor, do some changes
> (not real changes, only aim to call stp editor's save method)
> Then save the file. At this time, the stp editor add the source attribute
> to the sequenceflow automatically, you may use the bpmn export correctly
>
> Grid
>
>
>
>
>>> I tried again with another BPMN model that had multiple pools. When I
>>> uncheck a pool in the wizard, it throws an NPE. Should this be
>>> described in another JIRA issue
>>>
>>>
>>>
>> Yes, please.
>>
>> -- John
>>
>> On Fri, 2008-12-05 at 14:22 -0500, Jeffrey Delong wrote:
>>
>>
>>
>>> Jon,
>>>
>>> I attached the files. Grid did not report the file worked correctly for him,
he just reported that the zip file from the download site that I sent him installed
correctly in his environment.
>>>
>>> I tried again with another BPMN model that had multiple pools. When I uncheck
a pool in the wizard, it throws an NPE. Should this be described in another JIRA issue?
>>>
>>> Thanks,
>>>
>>> Jeff
>>>
>>> ----- Original Message -----
>>> From: "John Graham" <jgraham(a)redhat.com>
>>> To: "Jeffrey Delong" <jdelong(a)redhat.com>
>>> Cc: jbosstools-dev(a)lists.jboss.org, "feng.qian"
<fqian(a)redhat.com>
>>> Sent: Friday, December 5, 2008 12:09:45 PM GMT -07:00 US/Canada Mountain
>>> Subject: Re: [jbosstools-dev] Re: How to use JBPm Converter
>>>
>>> Jeff,
>>>
>>> I've created:
>>>
>>> https://jira.jboss.org/jira/browse/JBIDE-3364
>>>
>>> to track this. Can you please attach the BPMN file in question to that
>>> JIRA, so Grid can look into it (not sure if this is the same file as
>>> originally discussed on this thread, since Grid reported that file
>>> worked correctly for him.)
>>>
>>> Grid: Please take a look into this.
>>>
>>> -- John
>>>
>>> On Fri, 2008-12-05 at 13:26 -0500, Jeffrey Delong wrote:
>>>
>>>
>>>
>>>> Now I have installed:
>>>>
>>>> eclipse-jee-ganymede-SR1-linux-gtk
>>>> JBossTools-3.0.0.CR1-N200812050815-ALL-linux-gtk
>>>> and the SOA Tools BPMN Modeler from stp.archivedsite-2.0.0.M3.zip
>>>>
>>>> The BPMN Converter is installed, and I see it when I use Export from the
Context Menu. However when I get to the step in the wizard that has me select the pool, I
select the only pool in my BPMN diagram (I had hand removed the other pools prior to start
with a simple example), and it hangs when I select next, and I have to cancel. My BPMN
model was generated from the pi4soa CDL tool.
>>>>
>>>>
>>>> Jeff
>>>>
>>>>
>>>> ----- Original Message -----
>>>> From: "John Graham" <jgraham(a)redhat.com>
>>>> To: "Jeffrey Delong" <jdelong(a)redhat.com>
>>>> Cc: jbosstools-dev(a)lists.jboss.org, "feng.qian"
<fqian(a)redhat.com>
>>>> Sent: Friday, December 5, 2008 10:20:54 AM GMT -07:00 US/Canada Mountain
>>>> Subject: Re: [jbosstools-dev] Re: How to use JBPm Converter
>>>>
>>>> Jeff,
>>>>
>>>> I suspect that Grid created this zip from his own environment, since
I'm
>>>> not aware of any regularly produced zips in this area.
>>>>
>>>> The requirement you mention about using SOA-P tooling only from JBT has
>>>> been the subject of debate before, with one serious limiting factor
>>>> being the JBT build. As Nick B moves the JBT to a modular system, then I
>>>> think these sorts of subsets become possible. Ultimately, it would be
>>>> Max's call.
>>>>
>>>> -- John
>>>>
>>>> On Fri, 2008-12-05 at 12:15 -0500, Jeffrey Delong wrote:
>>>>
>>>>
>>>>
>>>>> Jon,
>>>>>
>>>>> A lot of times we don't want the entire JBoss Tools, but just the
plugins that we intend to use. In particular doing soa development work I have no interest
in or use for seam, rich faces, jbossas tooling. So until there is a version of JBoss
Tools targeted at the SOA developer, I would prefer to add the plugins I require. Grid
mentioned a common zip, but the one he passed me was old. I don't see a tools common
zip on the download page. How would I find this?
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Jeff
>>>>>
>>>>>
>>>>> ----- Original Message -----
>>>>> From: "John Graham" <jgraham(a)redhat.com>
>>>>> To: "feng.qian" <fqian(a)redhat.com>
>>>>> Cc: "Jeffrey Delong" <jdelong(a)redhat.com>,
jbosstools-dev(a)lists.jboss.org
>>>>> Sent: Friday, December 5, 2008 8:59:26 AM GMT -07:00 US/Canada
Mountain
>>>>> Subject: Re: [jbosstools-dev] Re: How to use JBPm Converter
>>>>>
>>>>> On the surface (just scanning the thread below):
>>>>>
>>>>> Jeff: Having the plug-in and feature in the right directories is the
>>>>> first step, but that does not necessarily mean that the Eclipse
platform
>>>>> will load them (dependencies could be missing). If you don't see
a
>>>>> "BPMN" category under Export, then it is likely due to
missing
>>>>> dependencies. I would suggest the latest Eclipse Gaynmede J2EE
package
>>>>> and latest JBT CR1 build to ensure everything is in place.
>>>>>
>>>>> -- John
>>>>>
>>>>> On Fri, 2008-12-05 at 13:27 +0800, feng.qian wrote:
>>>>>
>>>>>
>>>>>
>>>>>> Hi Jeffrey,
>>>>>>
>>>>>> I have tested your zip file. No problems.
>>>>>> Please go to the eclipse menu Help->About Eclipse
Platform->Plug-in
>>>>>> Details and see
>>>>>> if the plugin is correctly installed.
>>>>>>
>>>>>> Grid
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> Grid,
>>>>>>>
>>>>>>> Downloaded from:
>>>>>>>
>>>>>>> http://www.jboss.org/tools/download/
>>>>>>>
>>>>>>> I have verified that both the feature and the plugin are in
the appropriate directory:
>>>>>>>
>>>>>>> I have attached the zip file.
>>>>>>>
>>>>>>> Thanks,
>>>>>>>
>>>>>>> Jeff
>>>>>>>
>>>>>>> ----- Original Message -----
>>>>>>> From: "feng.qian" <fqian(a)redhat.com>
>>>>>>> To: "Jeffrey Delong" <jdelong(a)redhat.com>
>>>>>>> Sent: Thursday, December 4, 2008 9:39:16 PM GMT -07:00
US/Canada Mountain
>>>>>>> Subject: Re: How to use JBPm Converter
>>>>>>>
>>>>>>> Jeffrey Delong wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> Grid,
>>>>>>>>
>>>>>>>> This is not working for me. I do not see the BPMN
Folder.
>>>>>>>>
>>>>>>>> I unzipped jBPM-Convert-1.0.0.Beta1-R200810311334.zip
into eclipse folder.
>>>>>>>>
>>>>>>>> FYI I have installed:
>>>>>>>>
>>>>>>>> pi4soa2.0.0.CR4-eclipse3.4-linux.tar.gz
>>>>>>>> jbpm 3.1.5 via the local update site
(jbpm-jpdl-designer-site-3.1.5.zip)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> jBPM-Convert-1.0.0.Beta1-R200810311334.zip?
>>>>>>> Where do you get it? I have never seen this zip. But I think
it maybe:
>>>>>>> The zip should include a feature named
org.jboss.tools.jbpm.convert.feature and a plugin named org.jboss.tools.jbpm.convert.
>>>>>>> You should put the plugin into eclipse/plugins and the
feature into eclipse/features.
>>>>>>> If not working, please send the zip to me.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> eclipse stp bpmn modeler from local update site
(stp.archivedsite-2.0.0.M3.zip)
>>>>>>>>
>>>>>>>> This is my "process designer" workbench :)
>>>>>>>>
>>>>>>>> Jeff
>>>>>>>>
>>>>>>>> ----- Original Message -----
>>>>>>>> From: "feng.qian" <fqian(a)redhat.com>
>>>>>>>> To: "Jeffrey Delong"
<jdelong(a)redhat.com>
>>>>>>>> Sent: Thursday, December 4, 2008 6:54:33 PM GMT -07:00
US/Canada Mountain
>>>>>>>> Subject: Re: How to use JBPm Converter
>>>>>>>>
>>>>>>>> Hi Jeffrey,
>>>>>>>> This is my carelessness. I forgot to tell you the
changes about jbpm
>>>>>>>> convert. As John's suggestion, I removed the popup
menu of jbpm convert
>>>>>>>> and added a export wizard.
>>>>>>>> You may:
>>>>>>>> 1. Choose a *.bpmn file ,and right click on it.
>>>>>>>> 2. The popup menu is opened.
>>>>>>>> 3. You click on Export... action.
>>>>>>>> 4. A wizard for export open.
>>>>>>>> 5. In this wizard, there is a folder named BPMN
Export, click it
>>>>>>>> to expand it and click BPMN -> JPDL menu.
>>>>>>>> 6. A wizard for jbpm converter open.
>>>>>>>> This wizard looks like that before. I think you are able
to use it.
>>>>>>>> Any questions, please let me know.
>>>>>>>> (Before you use jbpm convert, you must have two file in a
folder: *.bpmn
>>>>>>>> and *.bpmn_diagram)
>>>>>>>>
>>>>>>>> Cheers
>>>>>>>> Grid
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> Hi Grid,
>>>>>>>>>
>>>>>>>>> I installed the JBPM Converter into my Eclipse 3.4
installation (Linux). Next time I started it Eclipse it came up shrunken in the top left
corner of my display.
>>>>>>>>>
>>>>>>>>> I have a BPMN diagram (that I generated from a PI4SOA
cdm file) and want to try to convert it to jBPM. Not sure what is the right way to do
that.
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>>
>>>>>>>>> Jeff
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>> _______________________________________________
>>>>>> jbosstools-dev mailing list
>>>>>> jbosstools-dev(a)lists.jboss.org
>>>>>> https://lists.jboss.org/mailman/listinfo/jbosstools-dev
>>>>>>
>>>>>>
>>>>>>
>>
>>
>>
>
>
6:24 a.m.
New subject: Which version should I support? (Re: Re: How to use JBPm Converter)
From this link page, the Ganymede is stable.
stp.archivedsite-2.0.0.M3.zip is committer build.
O, my god!
Jeff, you are right. Based on your stp.archivedsite-2.0.0.M3.zip, I
get the issue.
But based on Ganymede, this issue does not occur.
The stp modeler is too distable!
Which version should I support? or both?
Any suggestion are appreciated.
Grid
>
> ----- Original Message -----
> From: "grid.qian" <fqian(a)redhat.com>
> To: "Jeffrey Delong" <jdelong(a)redhat.com>
> Cc: jbosstools-dev(a)lists.jboss.org, "John Graham"
<jgraham(a)redhat.com>
> Sent: Sunday, December 7, 2008 9:45:06 PM GMT -07:00 US/Canada Mountain
> Subject: Re: [jbosstools-dev] Re: How to use JBPm Converter
>
>
>
>> Grid,
>>
>> As I stated below, I am using the SOA Tools BPMN Editor.
>>
>>
>>>>> Now I have installed:
>>>>>
>>>>> eclipse-jee-ganymede-SR1-linux-gtk
>>>>> JBossTools-3.0.0.CR1-N200812050815-ALL-linux-gtk
>>>>> and the SOA Tools BPMN Modeler from stp.archivedsite-2.0.0.M3.zip
>>>>>
>>
>> It is true that my models were generated from PI4SOA CDL models.
>> However I created a very simple model directly in SOA Tools BPMN
>> Modeler and I experience the same issue when trying to convert it to
>> JPDL (attached those files). Also, not sure what you mean by
>> "sequenceflow". I don't see sequenceflow in any .bpmn or
.bpmn_diagram.
>>
> O, "sequenceflow" is a name from bpmn specification. In *.bpmn, it
> 's name is "sequenceEdges". In stp bpmn editor, it's name is Flow
> Connector.
> I am running stp bpmn editor by debugging stp bpmn editor sources. So
> maybe some differences?
> Where do you get the stp.archivedsite-2.0.0.M3.zip? Please give me a
> link.Thanks.
>
>
>> Jeff
>>
>>
>> ----- Original Message -----
>> From: "grid.qian" <fqian(a)redhat.com>
>> To: "John Graham" <jgraham(a)redhat.com>
>> Cc: "Jeffrey Delong" <jdelong(a)redhat.com>,
>> jbosstools-dev(a)lists.jboss.org
>> Sent: Sunday, December 7, 2008 8:14:43 PM GMT -07:00 US/Canada Mountain
>> Subject: Re: [jbosstools-dev] Re: How to use JBPm Converter
>>
>> Hi Jeff,
>> I have known the reason of the issue JBIDE-3364.
>> I think your bpmn files are not from STP BPMN EDITOR?
>> STP bpmn editor bpmn file: *.bpmn, it's sequenceflow has a attribute:
>> source. The source is the sequenceflow's source node. But your bpmn
>> files has not this attribute. So this issue occurs.
>>
>> John,
>> We need to support these files from other editor?
>> If yes, I need to do some works for it.
>> If not, I have a workaround:
>> Open the bpmn file using stp bpmn editor, do some changes
>> (not real changes, only aim to call stp editor's save method)
>> Then save the file. At this time, the stp editor add the source
>> attribute
>> to the sequenceflow automatically, you may use the bpmn export
>> correctly
>>
>> Grid
>>
>>
>>
>>>> I tried again with another BPMN model that had multiple pools. When I
>>>> uncheck a pool in the wizard, it throws an NPE. Should this be
>>>> described in another JIRA issue
>>>>
>>> Yes, please.
>>>
>>> -- John
>>>
>>> On Fri, 2008-12-05 at 14:22 -0500, Jeffrey Delong wrote:
>>>
>>>> Jon,
>>>>
>>>> I attached the files. Grid did not report the file worked
>>>> correctly for him, he just reported that the zip file from the
>>>> download site that I sent him installed correctly in his environment.
>>>>
>>>> I tried again with another BPMN model that had multiple pools.
>>>> When I uncheck a pool in the wizard, it throws an NPE. Should this
>>>> be described in another JIRA issue?
>>>>
>>>> Thanks,
>>>>
>>>> Jeff
>>>>
>>>> ----- Original Message -----
>>>> From: "John Graham" <jgraham(a)redhat.com>
>>>> To: "Jeffrey Delong" <jdelong(a)redhat.com>
>>>> Cc: jbosstools-dev(a)lists.jboss.org, "feng.qian"
<fqian(a)redhat.com>
>>>> Sent: Friday, December 5, 2008 12:09:45 PM GMT -07:00 US/Canada
>>>> Mountain
>>>> Subject: Re: [jbosstools-dev] Re: How to use JBPm Converter
>>>>
>>>> Jeff,
>>>>
>>>> I've created:
>>>>
>>>> https://jira.jboss.org/jira/browse/JBIDE-3364
>>>>
>>>> to track this. Can you please attach the BPMN file in question to
>>>> that
>>>> JIRA, so Grid can look into it (not sure if this is the same file as
>>>> originally discussed on this thread, since Grid reported that file
>>>> worked correctly for him.)
>>>>
>>>> Grid: Please take a look into this.
>>>>
>>>> -- John
>>>>
>>>> On Fri, 2008-12-05 at 13:26 -0500, Jeffrey Delong wrote:
>>>>
>>>>> Now I have installed:
>>>>>
>>>>> eclipse-jee-ganymede-SR1-linux-gtk
>>>>> JBossTools-3.0.0.CR1-N200812050815-ALL-linux-gtk
>>>>> and the SOA Tools BPMN Modeler from stp.archivedsite-2.0.0.M3.zip
>>>>>
>>>>> The BPMN Converter is installed, and I see it when I use Export
>>>>> from the Context Menu. However when I get to the step in the
>>>>> wizard that has me select the pool, I select the only pool in my
>>>>> BPMN diagram (I had hand removed the other pools prior to start
>>>>> with a simple example), and it hangs when I select next, and I
>>>>> have to cancel. My BPMN model was generated from the pi4soa CDL
>>>>> tool.
>>>>>
>>>>>
>>>>> Jeff
>>>>>
>>>>>
>>>>> ----- Original Message -----
>>>>> From: "John Graham" <jgraham(a)redhat.com>
>>>>> To: "Jeffrey Delong" <jdelong(a)redhat.com>
>>>>> Cc: jbosstools-dev(a)lists.jboss.org, "feng.qian"
<fqian(a)redhat.com>
>>>>> Sent: Friday, December 5, 2008 10:20:54 AM GMT -07:00 US/Canada
>>>>> Mountain
>>>>> Subject: Re: [jbosstools-dev] Re: How to use JBPm Converter
>>>>>
>>>>> Jeff,
>>>>>
>>>>> I suspect that Grid created this zip from his own environment,
>>>>> since I'm
>>>>> not aware of any regularly produced zips in this area.
>>>>>
>>>>> The requirement you mention about using SOA-P tooling only from
>>>>> JBT has
>>>>> been the subject of debate before, with one serious limiting factor
>>>>> being the JBT build. As Nick B moves the JBT to a modular system,
>>>>> then I
>>>>> think these sorts of subsets become possible. Ultimately, it
>>>>> would be
>>>>> Max's call.
>>>>>
>>>>> -- John
>>>>>
>>>>> On Fri, 2008-12-05 at 12:15 -0500, Jeffrey Delong wrote:
>>>>>
>>>>>> Jon,
>>>>>>
>>>>>> A lot of times we don't want the entire JBoss Tools, but just
>>>>>> the plugins that we intend to use. In particular doing soa
>>>>>> development work I have no interest in or use for seam, rich
>>>>>> faces, jbossas tooling. So until there is a version of JBoss
>>>>>> Tools targeted at the SOA developer, I would prefer to add the
>>>>>> plugins I require. Grid mentioned a common zip, but the one he
>>>>>> passed me was old. I don't see a tools common zip on the
>>>>>> download page. How would I find this?
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Jeff
>>>>>>
>>>>>>
>>>>>> ----- Original Message -----
>>>>>> From: "John Graham" <jgraham(a)redhat.com>
>>>>>> To: "feng.qian" <fqian(a)redhat.com>
>>>>>> Cc: "Jeffrey Delong" <jdelong(a)redhat.com>,
>>>>>> jbosstools-dev(a)lists.jboss.org
>>>>>> Sent: Friday, December 5, 2008 8:59:26 AM GMT -07:00 US/Canada
>>>>>> Mountain
>>>>>> Subject: Re: [jbosstools-dev] Re: How to use JBPm Converter
>>>>>>
>>>>>> On the surface (just scanning the thread below):
>>>>>>
>>>>>> Jeff: Having the plug-in and feature in the right directories is
>>>>>> the
>>>>>> first step, but that does not necessarily mean that the Eclipse
>>>>>> platform
>>>>>> will load them (dependencies could be missing). If you don't
see a
>>>>>> "BPMN" category under Export, then it is likely due to
missing
>>>>>> dependencies. I would suggest the latest Eclipse Gaynmede J2EE
>>>>>> package
>>>>>> and latest JBT CR1 build to ensure everything is in place.
>>>>>>
>>>>>> -- John
>>>>>>
>>>>>> On Fri, 2008-12-05 at 13:27 +0800, feng.qian wrote:
>>>>>>
>>>>>>> Hi Jeffrey,
>>>>>>>
>>>>>>> I have tested your zip file. No problems.
>>>>>>> Please go to the eclipse menu Help->About Eclipse
>>>>>>> Platform->Plug-in Details and see
>>>>>>> if the plugin is correctly installed.
>>>>>>>
>>>>>>> Grid
>>>>>>>
>>>>>>>
>>>>>>>> Grid,
>>>>>>>>
>>>>>>>> Downloaded from:
>>>>>>>>
>>>>>>>> http://www.jboss.org/tools/download/
>>>>>>>>
>>>>>>>> I have verified that both the feature and the plugin are
in
>>>>>>>> the appropriate directory:
>>>>>>>>
>>>>>>>> I have attached the zip file.
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>>
>>>>>>>> Jeff
>>>>>>>>
>>>>>>>> ----- Original Message -----
>>>>>>>> From: "feng.qian" <fqian(a)redhat.com>
>>>>>>>> To: "Jeffrey Delong"
<jdelong(a)redhat.com>
>>>>>>>> Sent: Thursday, December 4, 2008 9:39:16 PM GMT -07:00
>>>>>>>> US/Canada Mountain
>>>>>>>> Subject: Re: How to use JBPm Converter
>>>>>>>>
>>>>>>>> Jeffrey Delong wrote:
>>>>>>>>
>>>>>>>>> Grid,
>>>>>>>>>
>>>>>>>>> This is not working for me. I do not see the BPMN
Folder.
>>>>>>>>>
>>>>>>>>> I unzipped jBPM-Convert-1.0.0.Beta1-R200810311334.zip
into
>>>>>>>>> eclipse folder.
>>>>>>>>>
>>>>>>>>> FYI I have installed:
>>>>>>>>>
>>>>>>>>> pi4soa2.0.0.CR4-eclipse3.4-linux.tar.gz
>>>>>>>>> jbpm 3.1.5 via the local update site
>>>>>>>>> (jbpm-jpdl-designer-site-3.1.5.zip)
>>>>>>>>>
>>>>>>>> jBPM-Convert-1.0.0.Beta1-R200810311334.zip?
>>>>>>>> Where do you get it? I have never seen this zip. But I
think
>>>>>>>> it maybe:
>>>>>>>> The zip should include a feature named
>>>>>>>> org.jboss.tools.jbpm.convert.feature and a plugin named
>>>>>>>> org.jboss.tools.jbpm.convert.
>>>>>>>> You should put the plugin into eclipse/plugins and the
feature
>>>>>>>> into eclipse/features.
>>>>>>>> If not working, please send the zip to me.
>>>>>>>>
>>>>>>>>
>>>>>>>>> eclipse stp bpmn modeler from local update site
>>>>>>>>> (stp.archivedsite-2.0.0.M3.zip)
>>>>>>>>>
>>>>>>>>> This is my "process designer" workbench :)
>>>>>>>>>
>>>>>>>>> Jeff
>>>>>>>>>
>>>>>>>>> ----- Original Message -----
>>>>>>>>> From: "feng.qian" <fqian(a)redhat.com>
>>>>>>>>> To: "Jeffrey Delong"
<jdelong(a)redhat.com>
>>>>>>>>> Sent: Thursday, December 4, 2008 6:54:33 PM GMT
-07:00
>>>>>>>>> US/Canada Mountain
>>>>>>>>> Subject: Re: How to use JBPm Converter
>>>>>>>>>
>>>>>>>>> Hi Jeffrey,
>>>>>>>>> This is my carelessness. I forgot to tell you the
changes
>>>>>>>>> about jbpm convert. As John's suggestion, I
removed the popup
>>>>>>>>> menu of jbpm convert and added a export wizard.
>>>>>>>>> You may:
>>>>>>>>> 1. Choose a *.bpmn file ,and right click on it.
>>>>>>>>> 2. The popup menu is opened.
>>>>>>>>> 3. You click on Export... action.
>>>>>>>>> 4. A wizard for export open.
>>>>>>>>> 5. In this wizard, there is a folder named BPMN
Export,
>>>>>>>>> click it to expand it and click BPMN -> JPDL
menu.
>>>>>>>>> 6. A wizard for jbpm converter open.
>>>>>>>>> This wizard looks like that before. I think you are
able to
>>>>>>>>> use it.
>>>>>>>>> Any questions, please let me know.
>>>>>>>>> (Before you use jbpm convert, you must have two file
in a
>>>>>>>>> folder: *.bpmn and *.bpmn_diagram)
>>>>>>>>>
>>>>>>>>> Cheers
>>>>>>>>> Grid
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> Hi Grid,
>>>>>>>>>>
>>>>>>>>>> I installed the JBPM Converter into my Eclipse
3.4
>>>>>>>>>> installation (Linux). Next time I started it
Eclipse it came
>>>>>>>>>> up shrunken in the top left corner of my
display.
>>>>>>>>>>
>>>>>>>>>> I have a BPMN diagram (that I generated from a
PI4SOA cdm
>>>>>>>>>> file) and want to try to convert it to jBPM. Not
sure what
>>>>>>>>>> is the right way to do that.
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>>
>>>>>>>>>> Jeff
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> jbosstools-dev mailing list
>>>>>>> jbosstools-dev(a)lists.jboss.org
>>>>>>> https://lists.jboss.org/mailman/listinfo/jbosstools-dev
>>>>>>>
>>>
>>
>
>
_______________________________________________
jbosstools-dev mailing list
jbosstools-dev(a)lists.jboss.org
https://lists.jboss.org/mailman/listinfo/jbosstools-dev
5869
days inactive
5869
days old
jbosstools-dev@lists.jboss.org
1 comments
1 participants
participants (1)
-
grid.qian