[seam-commits] Seam SVN: r10052 - branches/enterprise/JBPAPP_4_3_FP01.

Author: manaRH Date: 2009-02-17 05:52:35 -0500 (Tue, 17 Feb 2009) New Revision: 10052 Added: branches/enterprise/JBPAPP_4_3_FP01/clustering-howto.txt Log: JBPAPP-1495 Added: branches/enterprise/JBPAPP_4_3_FP01/clustering-howto.txt =================================================================== --- branches/enterprise/JBPAPP_4_3_FP01/clustering-howto.txt (rev 0) +++ branches/enterprise/JBPAPP_4_3_FP01/clustering-howto.txt 2009-02-17 10:52:35 UTC (rev 10052) @@ -0,0 +1,213 @@ += Deploying a Seam application into a JBoss AS cluster using HTTP session replication = + +The procedure outlined in this tutorial has been validated with an seam-gen application and the Seam booking example. + +In the tutorial, I assume that the IP addresses of the master and slave servers are 192.168.1.2 and 192.168.1.3, +respectively. I am intentionally not using the mod_jk load balancer so that it's easier to validate that both nodes are +responding to requests and interchanging sessions. + +The log messages shown below were generated from the deployment of a WAR application named vehicles.war and its +cooresponding datasource named vehiclesDatasource. The booking example fully supports this process and you can find instructions on how to deploy it to a cluster in the examples/booking/readme.txt file. + +I'm using the farm deployment method in these instructions, though you could also deploy the application normally and +allow the two servers to negotiate a master/slave relationship based on startup order. + +All timestamps have been zeroed out to reduce noise. + +== A note about SELinux == + +You might run into problems getting your nodes to see one another if they are on different machines and the machines are +running RHEL/Fedora. JBoss AS clustering relies on UDP multicasting provided by jGroups. The SELinux configuration that +ships with RHEL/Fedora blocks these packets by default. You can allow them to pass by modifying the iptables rules (as +root). The following commands apply to an IP address that matches 192.168.1.x. + + /sbin/iptables -I RH-Firewall-1-INPUT 5 -p udp -d 224.0.0.0/4 -j ACCEPT + /sbin/iptables -I RH-Firewall-1-INPUT 9 -p udp -s 192.168.1.0/24 -j ACCEPT + /sbin/iptables -I RH-Firewall-1-INPUT 10 -p tcp -s 192.168.1.0/24 -j ACCEPT + /etc/init.d/iptables save + +== A note about SFSBs == + +If you are deploying an application with SFSBs and HTTP session replication to a JBoss AS cluster, you must ensure that your SFSB classes are annotated with @Clustered (from the JBoss EJB 3 annotation API) or marked as clustered in the jboss.xml descriptor. See the booking example for details. + +With that out of the way, it's time to get started. + +== Tutorial == + +1. Create two instances of JBoss AS (just extract the zip twice) +2. Deploy the JDBC driver to server/all/lib/ on both instances if not using HSQLDB +3. Add <distributable/> as the first child element in WEB-INF/web.xml +4. Set the distributable property on org.jboss.seam.core.init to true to enabled the ManagedEntityInterceptor + (i.e., <core:init distributable="true"/> in WEB-INF/components.xml) +5. Have two IP addresses available (two computers, two network cards, or two IP addresses bound to the same interface). + +On *nix, you can bind a new IP address to a network interface using the following command: + + /sbin/ifconfig eth1:2 192.168.1.3 + +Replace eth1 with your interface name and make the IP address conform to your network. + +If you're on Windows, follow these steps: + + - Open your network adapter + - Click Properties + - Select Internet Protocol (TCP/IP) then click Properties + - Click Advanced... + - Select the IP settings tab and click Add... + - Type in an IP address, click Add + - Click OK on all open windows + +6. Start the master JBoss AS instance on the first IP: + + ./bin/run.sh -c all -b 192.168.1.2 + +You should see the following in the log: + +00:00:00,000 INFO [DefaultPartition] Number of cluster members: 1 +00:00:00,000 INFO [DefaultPartition] Other members: 0 +00:00:00,000 INFO [DefaultPartition] Fetching state (will wait for 30000 milliseconds): +00:00:00,000 INFO [DefaultPartition] State could not be retrieved (we are the first member in group) + +7. Verify that the server/all/farm directory is empty in the slave JBoss AS instance +8. Start the slave JBoss AS on second the IP + + ./bin/run.sh -c all -b 192.168.1.3 + +Should see the following in the log: + +00:00:00,000 INFO [DefaultPartition] Number of cluster members: 2 +00:00:00,000 INFO [DefaultPartition] Other members: 1 +00:00:00,000 INFO [DefaultPartition] Fetching state (will wait for 30000 milliseconds): +00:00:00,000 INFO [DefaultPartition] state was retrieved successfully (in 120 milliseconds) + +Back in the first instance's log you should see acknowledgement of the new member: + +00:00:00,000 INFO [DefaultPartition] I am (192.168.1.2:1099) received membershipChanged event: +00:00:00,000 INFO [DefaultPartition] Dead members: 0 ([]) +00:00:00,000 INFO [DefaultPartition] New Members : 1 ([192.168.1.3:1099]) +00:00:00,000 INFO [DefaultPartition] All Members : 2 ([192.168.1.2:1099, 192.168.1.3:1099]) + +9. Deploy the -ds.xml to server/all/farm of the master instance + +In the log of the master instance you should see acknowlegement of this deployment: + +00:00:00,000 INFO [ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=vehiclesDatasource' to JNDI name 'java:vehiclesDatasource' +00:00:00,000 INFO [ClusterFileTransfer] Start push of file vehicles-ds.xml to cluster. +00:00:00,000 INFO [ClusterFileTransfer] Finished push of file vehicles-ds.xml to cluster. + +In the log of the slave instance you should see a complimentary message: + +00:00:00,000 INFO [FarmMemberService] farmDeployment(), deploy locally: farm/vehicles-ds.xml +00:00:00,000 INFO [ConnectionFactoryBindingService] Unbound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=vehiclesDatasource' from JNDI name 'java:vehiclesDatasource' + +10. Deploy the application to the server/all/farm directory + +In the log of the master instance you should see acknowlegement of this deployment after the normal application startup +messages have finished: + +00:00:00,000 INFO [ClusterFileTransfer] Start push of file vehicles.war to cluster. + +Wait ~3 minutes for the deployed archive to be transferred (I don't know why it takes so long) + +In the log of the master instance you should see acknowlegement of this deployment prior to the normal application +startup messages: + +00:00:00,000 INFO [FarmMemberService] farmDeployment(), deploy locally: farm/vehicles.war + +Once the application is transfered, you should see confirmation in the log of the master instance: + +00:00:00,000 INFO [ClusterFileTransfer] Finished push of file vehicles.war to cluster. + +Then you should see the application startup messages appear in the slave instance. + +You're application is now running in a cluster with HTTP session replication! But, of course, you are going to want to +validate that the clustering actually works. + += Validating the distributable services of an application running in a cluster = + +It's all well and fine to see the application start successfully on two different JBoss AS servers, but seeing is +believing. You likely want to validate that the two instances are exchanging HTTP sessions to allow the slave to take +over when the master instance is stopped. + +Start off by visiting the application running on the master instance in your browser. That will produce the first HTTP +session. Now, open up the JBoss AS JMX console on that instance and navigate to the following MBean: + +category: jboss.cache +entry: service=TomcatClusteringCache +method: printDetails() + +Invoke the printDetails() method. You will see a tree of active HTTP sessions. Verify that the session your browser is +using corresponds to one of the sessions in this tree. Here is a shortcut for invoking that method: + + http://192.168.1.2:8080/jmx-console/HtmlAdaptor?action=invokeOpByName&... + +Now switch over to the slave instance and invoke the same method in the JMX console. You should see an identical list +(at least underneath this application's context path). Here's the shortcut to that method. + + http://192.168.1.3:8080/jmx-console/HtmlAdaptor?action=invokeOpByName&... + +So you can see that at least both servers claim to have identical sessions. Now, time to test that the data is +serializing and unserializing properly. + +Here are the steps I follow when I test the booking example: + +1. Remove all cookies in your browser (or at least the JSESSIONID cookie for the domain 192.168.1.2) + +2. Open the booking example on the master instance: + + http://192.168.1.2/seam-booking + +3. Sign in using gavin/foobar, then click on the Find Hotels button + +4. Get a booking started: + + a. Choose one of the hotels and click its View Hotel link + b. Click on the Book Hotel button + +5. Build a URL to access the application on the slave instance + + a. Copy the URL in the workspace list at the bottom of the page + b. Change 192.168.1.2 to 192.168.1.3 + c. Get the value of the JSESSIONID cookie from the current page + d. Insert ;jsessionid= plus the value of the JSESSIONID cookie before the ? in the URL + +6. Visit the URL in a browser that has cookies disabled (the easiest way to ensure the session id in the URL is used) + + links "http://192.168.1.3/seam-booking/book.seam;jsessionid=****?cid=4 + +7. Complete the booking form and click the Proceed button + +8. Now return to the first browser and change the URL to match the confirm page, keeping the cid request parameter + + http://192.168.1.2/seam-booking/confirm.seam?cid=4 + +9. (optional) Verify you can continue w/o the slave instance running. Go into the JMX console and execute the shutdown() method on jboss.system:type=Server + +10. Confirm the booking. + +Here's another approach that I wrote before I did the step-by-step: + +Sign in using using the URL of the master instance. Then, construct a URL for the second instance by putting the +;jsessionid=XXXX immediately after the servlet path and changing the IP address. You should see that the session has +carried over to the other instance. Now kill the master instance and see that you can continue to use the application +from the slave instance. Remove the deployments from the server/all/farm directory and start the instance again. Switch +the IP in the URL back to that of the master instance and visit the URL. You'll see that the original session is still +being used. + +One way to watch objects passivate and activate is to create a session- or conversation-scoped Seam component and +implement the appropriate life-cycle methods. You can either use methods from the HttpSessionActivationListener +interface (Seam automatically registers this interface on all non-EJB components): + + public void sessionWillPassivate(HttpSessionEvent e); + public void sessionDidActivate(HttpSessionEvent e); + +or you can simply mark two no-argument public void methods with @PrePassivate and @PostActivate, respectively. Note that +the passivation step occurs at the end of every request, while the activation step occurs when a node is called upon. + +The really nice part about Seam is that it is working very hard to make replication transparent by automatically keeping +track of dirty object and ensuring that they are propagated. All you need to do is maintain a dirty flag on your +session- or conversation-scoped component. Seam automatically takes care of JPA entity instances for you. + += Notes and outstanding issues = + +* transient fields aren't always reinitialized, required a fix to SecurityInterceptor; might show up elsewhere