[JBoss JIRA] (JBIDE-15074) LiveReload Config Prompt text unclear
by Michelle Murray (JIRA)
[ https://issues.jboss.org/browse/JBIDE-15074?page=com.atlassian.jira.plugi... ]
Michelle Murray updated JBIDE-15074:
------------------------------------
Description:
LiveReload config prompt states:
"To use LiveReload a LiveReload server is required to be running. Please select the options you want to enable before the server starts, then click 'OK' to confirm, or click on 'Cancel' to cancel the operation."
The problem with this is that I already had the LiveReload server started when this prompt turned up. I realise the prompt is trying to be applicable both when the user has a server running and when the user doesn't have a server at all. And it is trying to state that the server needs to be restarted after changes have been made.
So how about changing the prompt to the following?
{color:red}
A LiveReload server with the selected configuration must be available to complete this operation. Do you want to apply the configuration and (re)start the LiveReload server?"
<check boxes and options>
No and Yes buttons
{color}
I used the '(re)start' to try to get around the case where users don't have a server yet so one needs to be started and the case where users have a server and it needs to be restarted. And posing it as a question ('Do you want to ...') gets rid of the need for 'click this to do this etc.'.
was:
LiveReload config prompt states:
"To use LiveReload a LiveReload server is required to be running. Please select the options you want to enable before the server starts, then click 'OK' to confirm, or click on 'Cancel' to cancel the operation."
The problem with this is that I already had the LiveReload server started when this prompt turned up. I realise the prompt is trying to be applicable both when the user has a server running and when the user doesn't have a server at all. And it is trying to state that the server needs to be restarted after changes have been made.
So how about changing the prompt to the following?
{quote}
A LiveReload server with the selected configuration must be available to complete this operation. Do you want to apply the configuration and (re)start the LiveReload server?"
<check boxes and options>
No and Yes buttons
{quote}
I used the '(re)start' to try to get around the case where users don't have a server yet so one needs to be started and the case where users have a server and it needs to be restarted. And posing it as a question ('Do you want to ...') gets rid of the need for 'click this to do this etc.'.
> LiveReload Config Prompt text unclear
> -------------------------------------
>
> Key: JBIDE-15074
> URL: https://issues.jboss.org/browse/JBIDE-15074
> Project: Tools (JBoss Tools)
> Issue Type: Bug
> Components: livereload
> Affects Versions: 4.1.0.Beta2
> Environment: JBDS Beta2-v20130626-0242-B345
> Reporter: Michelle Murray
> Attachments: LiveReload_ConfigPrompt2.png
>
>
> LiveReload config prompt states:
> "To use LiveReload a LiveReload server is required to be running. Please select the options you want to enable before the server starts, then click 'OK' to confirm, or click on 'Cancel' to cancel the operation."
> The problem with this is that I already had the LiveReload server started when this prompt turned up. I realise the prompt is trying to be applicable both when the user has a server running and when the user doesn't have a server at all. And it is trying to state that the server needs to be restarted after changes have been made.
> So how about changing the prompt to the following?
> {color:red}
> A LiveReload server with the selected configuration must be available to complete this operation. Do you want to apply the configuration and (re)start the LiveReload server?"
> <check boxes and options>
> No and Yes buttons
> {color}
> I used the '(re)start' to try to get around the case where users don't have a server yet so one needs to be started and the case where users have a server and it needs to be restarted. And posing it as a question ('Do you want to ...') gets rid of the need for 'click this to do this etc.'.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
12 years, 9 months
[JBoss JIRA] (JBIDE-15074) LiveReload Config Prompt text unclear
by Michelle Murray (JIRA)
[ https://issues.jboss.org/browse/JBIDE-15074?page=com.atlassian.jira.plugi... ]
Michelle Murray updated JBIDE-15074:
------------------------------------
Description:
LiveReload config prompt states:
"To use LiveReload a LiveReload server is required to be running. Please select the options you want to enable before the server starts, then click 'OK' to confirm, or click on 'Cancel' to cancel the operation."
The problem with this is that I already had the LiveReload server started when this prompt turned up. I realise the prompt is trying to be applicable both when the user has a server running and when the user doesn't have a server at all. And it is trying to state that the server needs to be restarted after changes have been made.
So how about changing the prompt to the following?
* "A LiveReload server with the selected configuration must be available to complete this operation. Do you want to apply the configuration and (re)start the LiveReload server?"
<check boxes and options>
No and Yes buttons *
I used the '(re)start' to try to get around the case where users don't have a server yet so one needs to be started and the case where users have a server and it needs to be restarted. And posing it as a question ('Do you want to ...') gets rid of the need for 'click this to do this etc.'.
was:
LiveReload config prompt states:
"To use LiveReload a LiveReload server is required to be running. Please select the options you want to enable before the server starts, then click 'OK' to confirm, or click on 'Cancel' to cancel the operation."
The problem with this is that I already had the LiveReload server started when this prompt turned up. I realise the prompt is trying to be applicable both when the user has a server running and when the user doesn't have a server at all. And it is trying to state that the server needs to be restarted after changes have been made.
So how about changing the prompt to the following?
*"A LiveReload server with the selected configuration must be available to complete this operation. Do you want to apply the configuration and (re)start the LiveReload server?"
<check boxes and options>
No and Yes buttons*
I used the '(re)start' to try to get around the case where users don't have a server yet so one needs to be started and the case where users have a server and it needs to be restarted. And posing it as a question ('Do you want to ...') gets rid of the need for 'click this to do this etc.'.
> LiveReload Config Prompt text unclear
> -------------------------------------
>
> Key: JBIDE-15074
> URL: https://issues.jboss.org/browse/JBIDE-15074
> Project: Tools (JBoss Tools)
> Issue Type: Bug
> Components: livereload
> Affects Versions: 4.1.0.Beta2
> Environment: JBDS Beta2-v20130626-0242-B345
> Reporter: Michelle Murray
> Attachments: LiveReload_ConfigPrompt2.png
>
>
> LiveReload config prompt states:
> "To use LiveReload a LiveReload server is required to be running. Please select the options you want to enable before the server starts, then click 'OK' to confirm, or click on 'Cancel' to cancel the operation."
> The problem with this is that I already had the LiveReload server started when this prompt turned up. I realise the prompt is trying to be applicable both when the user has a server running and when the user doesn't have a server at all. And it is trying to state that the server needs to be restarted after changes have been made.
> So how about changing the prompt to the following?
> * "A LiveReload server with the selected configuration must be available to complete this operation. Do you want to apply the configuration and (re)start the LiveReload server?"
> <check boxes and options>
> No and Yes buttons *
> I used the '(re)start' to try to get around the case where users don't have a server yet so one needs to be started and the case where users have a server and it needs to be restarted. And posing it as a question ('Do you want to ...') gets rid of the need for 'click this to do this etc.'.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
12 years, 9 months
[JBoss JIRA] (JBIDE-15074) LiveReload Config Prompt text unclear
by Michelle Murray (JIRA)
[ https://issues.jboss.org/browse/JBIDE-15074?page=com.atlassian.jira.plugi... ]
Michelle Murray updated JBIDE-15074:
------------------------------------
Description:
LiveReload config prompt states:
"To use LiveReload a LiveReload server is required to be running. Please select the options you want to enable before the server starts, then click 'OK' to confirm, or click on 'Cancel' to cancel the operation."
The problem with this is that I already had the LiveReload server started when this prompt turned up. I realise the prompt is trying to be applicable both when the user has a server running and when the user doesn't have a server at all. And it is trying to state that the server needs to be restarted after changes have been made.
So how about changing the prompt to the following?
{quote}
A LiveReload server with the selected configuration must be available to complete this operation. Do you want to apply the configuration and (re)start the LiveReload server?"
<check boxes and options>
No and Yes buttons
{quote}
I used the '(re)start' to try to get around the case where users don't have a server yet so one needs to be started and the case where users have a server and it needs to be restarted. And posing it as a question ('Do you want to ...') gets rid of the need for 'click this to do this etc.'.
was:
LiveReload config prompt states:
"To use LiveReload a LiveReload server is required to be running. Please select the options you want to enable before the server starts, then click 'OK' to confirm, or click on 'Cancel' to cancel the operation."
The problem with this is that I already had the LiveReload server started when this prompt turned up. I realise the prompt is trying to be applicable both when the user has a server running and when the user doesn't have a server at all. And it is trying to state that the server needs to be restarted after changes have been made.
So how about changing the prompt to the following?
* "A LiveReload server with the selected configuration must be available to complete this operation. Do you want to apply the configuration and (re)start the LiveReload server?"
<check boxes and options>
No and Yes buttons *
I used the '(re)start' to try to get around the case where users don't have a server yet so one needs to be started and the case where users have a server and it needs to be restarted. And posing it as a question ('Do you want to ...') gets rid of the need for 'click this to do this etc.'.
> LiveReload Config Prompt text unclear
> -------------------------------------
>
> Key: JBIDE-15074
> URL: https://issues.jboss.org/browse/JBIDE-15074
> Project: Tools (JBoss Tools)
> Issue Type: Bug
> Components: livereload
> Affects Versions: 4.1.0.Beta2
> Environment: JBDS Beta2-v20130626-0242-B345
> Reporter: Michelle Murray
> Attachments: LiveReload_ConfigPrompt2.png
>
>
> LiveReload config prompt states:
> "To use LiveReload a LiveReload server is required to be running. Please select the options you want to enable before the server starts, then click 'OK' to confirm, or click on 'Cancel' to cancel the operation."
> The problem with this is that I already had the LiveReload server started when this prompt turned up. I realise the prompt is trying to be applicable both when the user has a server running and when the user doesn't have a server at all. And it is trying to state that the server needs to be restarted after changes have been made.
> So how about changing the prompt to the following?
> {quote}
> A LiveReload server with the selected configuration must be available to complete this operation. Do you want to apply the configuration and (re)start the LiveReload server?"
> <check boxes and options>
> No and Yes buttons
> {quote}
> I used the '(re)start' to try to get around the case where users don't have a server yet so one needs to be started and the case where users have a server and it needs to be restarted. And posing it as a question ('Do you want to ...') gets rid of the need for 'click this to do this etc.'.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
12 years, 9 months
[JBoss JIRA] (JBIDE-15074) LiveReload Config Prompt text unclear
by Michelle Murray (JIRA)
[ https://issues.jboss.org/browse/JBIDE-15074?page=com.atlassian.jira.plugi... ]
Michelle Murray updated JBIDE-15074:
------------------------------------
Attachment: LiveReload_ConfigPrompt2.png
> LiveReload Config Prompt text unclear
> -------------------------------------
>
> Key: JBIDE-15074
> URL: https://issues.jboss.org/browse/JBIDE-15074
> Project: Tools (JBoss Tools)
> Issue Type: Bug
> Components: livereload
> Affects Versions: 4.1.0.Beta2
> Environment: JBDS Beta2-v20130626-0242-B345
> Reporter: Michelle Murray
> Attachments: LiveReload_ConfigPrompt2.png
>
>
> LiveReload config prompt states:
> "To use LiveReload a LiveReload server is required to be running. Please select the options you want to enable before the server starts, then click 'OK' to confirm, or click on 'Cancel' to cancel the operation."
> The problem with this is that I already had the LiveReload server started when this prompt turned up. I realise the prompt is trying to be applicable both when the user has a server running and when the user doesn't have a server at all. And it is trying to state that the server needs to be restarted after changes have been made.
> So how about changing the prompt to the following?
> *"A LiveReload server with the selected configuration must be available to complete this operation. Do you want to apply the configuration and (re)start the LiveReload server?"
> <check boxes and options>
> No and Yes buttons*
> I used the '(re)start' to try to get around the case where users don't have a server yet so one needs to be started and the case where users have a server and it needs to be restarted. And posing it as a question ('Do you want to ...') gets rid of the need for 'click this to do this etc.'.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
12 years, 9 months
[JBoss JIRA] (JBIDE-15074) LiveReload Config Prompt text unclear
by Michelle Murray (JIRA)
Michelle Murray created JBIDE-15074:
---------------------------------------
Summary: LiveReload Config Prompt text unclear
Key: JBIDE-15074
URL: https://issues.jboss.org/browse/JBIDE-15074
Project: Tools (JBoss Tools)
Issue Type: Bug
Components: livereload
Affects Versions: 4.1.0.Beta2
Environment: JBDS Beta2-v20130626-0242-B345
Reporter: Michelle Murray
LiveReload config prompt states:
"To use LiveReload a LiveReload server is required to be running. Please select the options you want to enable before the server starts, then click 'OK' to confirm, or click on 'Cancel' to cancel the operation."
The problem with this is that I already had the LiveReload server started when this prompt turned up. I realise the prompt is trying to be applicable both when the user has a server running and when the user doesn't have a server at all. And it is trying to state that the server needs to be restarted after changes have been made.
So how about changing the prompt to the following?
*"A LiveReload server with the selected configuration must be available to complete this operation. Do you want to apply the configuration and (re)start the LiveReload server?"
<check boxes and options>
No and Yes buttons*
I used the '(re)start' to try to get around the case where users don't have a server yet so one needs to be started and the case where users have a server and it needs to be restarted. And posing it as a question ('Do you want to ...') gets rid of the need for 'click this to do this etc.'.
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
12 years, 9 months
[JBoss JIRA] (JBIDE-15070) Mistyped link in LiveReload server editor
by Michelle Murray (JIRA)
[ https://issues.jboss.org/browse/JBIDE-15070?page=com.atlassian.jira.plugi... ]
Michelle Murray updated JBIDE-15070:
------------------------------------
Attachment: LiveReload_ConfigPrompt.png
> Mistyped link in LiveReload server editor
> -----------------------------------------
>
> Key: JBIDE-15070
> URL: https://issues.jboss.org/browse/JBIDE-15070
> Project: Tools (JBoss Tools)
> Issue Type: Bug
> Components: livereload
> Affects Versions: 4.1.0.Beta2
> Reporter: Vlado Pakan
> Priority: Minor
> Fix For: 4.1.0.CR1
>
> Attachments: LiveReload_ConfigPrompt.png
>
>
> 1. Define LiveReload server in Server view
> 2. Double click on created server
> ERROR: Check box in editor has title:
> Title is: "Inject the *livreload.js* script in HTML pages"
> Title has to be: "Inject the *livereload.js* script in HTML pages"
> The same typo also occurs in the LiveReload config prompt (see attached screen capture).
--
This message is automatically generated by JIRA.
If you think it was sent incorrectly, please contact your JIRA administrators
For more information on JIRA, see: http://www.atlassian.com/software/jira
12 years, 9 months